Laboratory Technician Jobs in UAE

BIM/CAD Architect/Draftsman – Concept Design We are seeking a highly skilled and code experienced BIM/CAD Architect/Draftsman – Concept Design to join our growing team. The ideal candidate will play a key role in developing high-quality technical architectural drawings and/or BIM models with full code knowledge for compliance with Dubai's regulatory requirements and local building standards. (i.e Preliminary Submission for DM, DDA, Trakhees, etc). The candidate should also be able to produce the technical drawings and apartment layouts based on quick sketches from his/her seniors This position is ideal for professionals with strong, technical expertise, and hands-on experience working in an architectural consultancy environment within the UAE.<br>Key Responsibilities Prepare code-complying technical architectural drawings, BIM models, and authority area calculations Develop concept design documentation, including plans, elevations, & sections. Produce high-quality Revit models with accurate BIM standards and project coordination. Collaborate closely with architects, urban designers, and multidisciplinary engineering teams during the concept development stage. Ensure all concept proposals comply with the Dubai Building Code and/or Dubai based applicable UAE regulations, and relevant authority requirements. Fully capable of individually preparing authority submission drawings and responding to technical comments. Can propose and workout apartment well designed apartment layouts, based on basic direction from his/her senior Maintain BIM standards, templates, and project documentation. Coordinate architectural models with structural and MEP disciplines to identify and resolve design conflicts. Support project teams from concept through schematic design while maintaining design quality and project deadlines.<br>Qualifications Bachelor's Degree in Architecture or a related field. Minimum 5 years of experience in an architectural consultancy, within the UAE. Strong proficiency in:Autodesk Revit Auto CADBIM workflows and standards Added Value but not must: Enscape, Lumion, or similar visualization software, Adobe Creative Suite, Indesign<br>Technical Knowledge Candidates should demonstrate working knowledge of:Dubai Building Code (DBC) Dubai Municipality regulations Authority submission requirements UAE accessibility standards Local planning and zoning regulations BIM coordination and documentation standards Architectural detailing and construction documentation Design coordination with multidisciplinary consultants<br>Skills Problem solving skills Can work independently Accurate and thorough in work accuracy Excellent attention to detail Strong conceptual drafting Ability to interpret design intent into accurate CAD Layouts / BIM models Strong communication and coordination abilities Ability to manage multiple projects and meet deadlines Team-oriented with a proactive approach to problem-solving

Job Description: Sales Engineer / Manager Location: Abu Dhabi<br>Job Summary The Sales Engineer / Manager specifies and sells Crouse-Hinds and B-Line product portfolios into the industrial and Oil & Gas segments across the assigned UAE region. This role focuses on mapping end-users, driving technical specifications, and managing distribution channels to accelerate market growth.<br>Job Responsibilities Market & Project Management: Manage the UAE OEM and distributor market, system integrators, and both Greenfield and Brownfield projects across Dubai and Abu Dhabi while tracking all upcoming project opportunities. Specification & Design Drive: Partner closely with distributors to map brownfield projects and collaborate with end-users and contractors to drive product designs, focusing on LED conversions and GRP/SS panel solutions. Installation Audits: Lead site installation audits for LED conversions and Maintenance, Repair, and Operations (MRO) requirements, providing foundational engineering support to qualify these pipeline opportunities. End-to-End Inquiry Ownership: Handle customer inquiries from initial technical and commercial receipt through successful purchase order conversion, ensuring efficient and effective distributor execution. Commercial & Technical Support: Deliver on-time technical and commercial support for every pipeline opportunity to optimize purchase order conversion rates. Inventory & Distribution Tracking: Review distributor inventory levels regularly to ensure MRO readiness, managing and updates the distribution tracking sheet on a monthly basis. Proposal Evaluation: Analyze and evaluate customer proposals, ensuring alignment with both technical requirements and commercial terms. Technical Review: Assess technical specifications and Bills of Quantities (BOQs) to determine the most suitable product offerings for client needs. Cross-Selling Solutions: Leverage company-wide cross-selling initiatives to maximize total product coverage, mapping OEMs and delivering regular product presentations. Order Execution: Oversee timely order execution by proactively managing customer expectations to ensure high levels of satisfaction. Financial Performance: Meet individual performance targets and contribute to team profit plans on a quarterly basis to secure annual business success.<br>Job Requirements Years and Area of Experience Minimum of 3 years of proven sales or engineering experience within the industrial and Oil & Gas segments.<br>Technical Knowledge Deep understanding of industrial electrical solutions, Crouse-Hinds, and B-Line product lines. Strong familiarity with LED conversion benefits, GRP/SS panel solutions, and interpreting complex BOQs and technical specifications.<br>Sales & Professional Skills Robust channel management skills with experience overseeing distributors, OEMs, and system integrators. Ability to run structured distribution tracking and manage commercial terms.<br>Soft Skills Strong communication, presentation, and relationship-building capabilities. Proficiency in Microsoft Office Suite (Outlook, Excel, Power Point).

<ul><li><p>Develop and maintain accurate BIM models for fit-out and interior design projects. Ø Create detailed 3D models using Revit and other BIM software. Ø Prepare shop drawings, construction drawings, and as-built drawings. Ø Coordinate architectural, interior, joinery, furniture, and MEP models. Ø Perform clash detection and resolve model conflicts with project stakeholders. Ø Ensure BIM models comply with project specifications, standards, and client requirements. Ø Update models based on design revisions and site changes. Ø Extract plans, elevations, sections, schedules, and quantities from BIM models. Ø Support designers, architects, engineers, and project teams with technical drawings and model information. Ø Participate in design coordination and project review meetings. Ø Maintain BIM documentation and model version control. Ø Assist in the preparation of material schedules and quantity take-offs. Ø Conduct quality checks to ensure model accuracy and completeness. Ø Coordinate with site teams to verify installation details and update as-built information. Ø Ensure timely delivery of BIM models and drawings in line with project schedules.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or bachelor’s degree in architecture, Civil Engineering, Interior Design, Construction Engineering. Ø 2-5 years of experience as a BIM Modeler, Draftsman, or BIM Technician. Ø Experience in interior fit-out, design & build, construction, or architectural projects. Ø Strong knowledge of BIM principles, standards, and workflows. Ø Strong understanding of joinery and fit-out systems, including materials (MDF, veneers, laminates, hardwood), finishes, fixings, and hardware. Ø Knowledge of interior construction methods, detailing, and industry best practices. Ø knowledge of shop drawing production and approval workflows. Ø Knowledge of project lifecycle, from design development through to installation and handover. Ø Proficiency in Revit, AutoCAD, Navisworks, and BIM software Ø Professional in BIM modeling and drafting. Ø Skills in Clash detection, coordination and technical drawing preparation. Ø Familiarity with MS Office Suite (Excel, Word, Outlook) for reporting and coordination. Ø Ability to read and interpret architectural, ID, MEP, and structural drawings for coordination. Ø Strong verbal and written communication skills to engage with clients, consultants, subcontractors, and internal teams. Ø Create accurate 3D BIM models, coordinate multidisciplinary models, identify and resolve design clashes. Ø Ability to manage multiple priorities and technical packages across different stages of the project. Ø Skills in tracking production, deliveries, and installations against project schedules. Ø Capable of troubleshooting on-site technical issues and proposing practical solutions quickly.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description</p><br><p>We are seeking a motivated and customer-focused Customer Support Engineer to join our engineering team based in Abu Dhabi, UAE. The role is responsible for providing technical support and engineering solutions for Mitsubishi Heavy Industries (MHI) gas turbines, generators, control systems, and associated auxiliary equipment across the Middle East region.</p><br><p>The Customer Support Engineer serves as the primary technical interface between customers and internal engineering, field service, repair, and commercial teams to ensure the safe, reliable, and efficient operation of customer assets. The role supports customers throughout the equipment lifecycle, including commissioning, operation, maintenance, troubleshooting, inspections, planned and forced outages and emergency response.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Provide technical support for MHI gas turbines, generators, control systems, and auxiliary equipment during operation, commissioning, inspections, outages, and emergency situations.</p></li><li><p>Troubleshoot mechanical, electrical, instrumentation, control, and auxiliary system issues using sound engineering principles.</p></li><li><p>Perform on-site engineering support during commissioning, inspections, maintenance activities, outages, and technical review meetings.</p></li><li><p>Prepare technical reports, procedures, specifications, recommendations, presentations, and other engineering documentation.</p></li><li><p>Respond to customer technical inquiries and provide timely engineering solutions.</p></li><li><p>Lead Root Cause Analysis (RCA) investigations and recommend corrective and preventive actions.</p></li><li><p>Coordinate with customers, field service teams, engineering, repair, and commercial departments to resolve technical issues.</p></li><li><p>Maintain technical records and project documentation in accordance with company procedures.</p></li><li><p>Support technical proposals, procurement activities, and engineering evaluations as required.</p></li><li><p>Develop and improve engineering procedures, standards, and best practices to enhance equipment reliability and operational performance.</p></li><li><p>Build and maintain strong customer relationships while representing MHI during site visits, meetings, inspections, and technical discussions.</p></li><li><p>Support emergency and unplanned outage activities, including travel and off-hours support when required.</p></li><li><p>Comply with company Quality, Health, Safety, Security, and Environmental (QHSSE) policies and maintain high standards of professionalism, integrity, and confidentiality.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications</strong></p><p><strong>Education</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bachelor's degree in Mechanical Engineering or a related engineering discipline.</p><p><strong>Experience</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 3–4 years of relevant experience in gas turbines, generators, rotating equipment, or power plant engineering, including operation, maintenance, troubleshooting, commissioning, or field service.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience providing technical customer support within the power generation industry is preferred.</p><p><strong>Technical Knowledge</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Knowledge of gas turbines, generators, control systems, instrumentation, and associated auxiliary equipment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Understanding of rotating equipment operation, maintenance, troubleshooting, and commissioning.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Knowledge of engineering problem-solving techniques, Root Cause Analysis (RCA).</p><p><strong>Languages</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Fluency in business English is required.</p><p><strong>Travel</strong></p><ul><li><p>Willingness to travel within the Middle East and internationally to support customer sites, inspections, outages, commissioning activities, and emergency response.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Why Carrier?</b></p><br><p>Carrier is the leading worldwide provider of heating, ventilation, and air conditioning (HVAC), refrigeration, fire, security, and cold chain solutions. We invented modern air conditioning, and our team of pioneers continues to advance technologies that transform how we live, work, and move.</p><br><p>We offer industry-leading services and sustainable solutions designed to create healthier homes, buildings, and environments while reducing environmental impact. At Carrier, diversity and inclusion drive innovation and growth, and our exceptional people put the customer at the center of everything we do.</p><br><p><b>Program Overview</b></p><br><p>This is a <b>1-year trainee program</b> with the possibility of transitioning into a <b>full-time role</b> based on performance and business needs.</p><br><p>The role focuses on supporting the Application Engineering and Sales teams through technical selections, quotations, customer support, and project coordination.</p><br><p><b>Key Responsibilities</b></p><br><p><b>Technical &amp; Application Support</b></p><br><ul><li>Prepare technical selections, compliance statements, submittals, and quotations</li><li>Handle enquiries using CRM &amp; SAP systems</li><li>Analyze project specifications, schedules, and HVAC requirements</li><li>Support consultants and customers with suitable HVAC solutions</li><li>Prepare technical comparison tables and schedules</li></ul><p><b>Coordination &amp; Communication</b></p><br><ul><li>Coordinate with Sales Engineers, consultants, and internal teams</li><li>Follow up on enquiries and project updates</li><li>Attend technical meetings and customer/site visits when required</li><li>Ensure timely responses aligned with KPIs</li></ul><p><b>Learning &amp; Compliance</b></p><br><ul><li>Stay updated with product software, catalogs, and HVAC standards</li><li>Attend assigned technical and ethics trainings</li><li>Follow company EH&amp;S and ISO procedures</li><li>Maintain awareness of standards such as AHRI, EUROVENT, LEED, DGNB, and DEWA</li></ul><p><b>Qualifications</b></p><br><ul><li>Bachelor’s Degree in Mechanical Engineering or related HVAC field</li></ul><p><b>Preferred Skills</b></p><br><ul><li>Knowledge of HVAC systems and applied products</li><li>Understanding of heat load calculations and technical selections</li><li>Proficiency in:<ul><li>MS Office &amp; Excel</li><li>AutoCAD</li><li>HVAC selection software</li><li>SAP / CRM systems</li></ul></li><li>Strong communication and interpersonal skills</li><li>Organized, detail-oriented, and customer-focused</li><li>Team player with strong analytical skills</li><li>Willingness to relocate within the UAE if required</li></ul><p><b>Key Competencies</b></p><br><ul><li>Integrity</li><li>Customer Focus</li><li>Analytical Thinking</li><li>Teamwork</li><li>Results Orientation</li><li>Ownership &amp; Accountability</li></ul><p><b>Key Performance Indicators (KPIs)</b></p><br><ul><li>Response time to enquiries</li><li>Timely completion of assigned tasks</li><li>Quality and accuracy of technical submissions</li><li>Manager performance evaluation</li></ul><p><b>Our Commitment to You</b></p><br><p>At Carrier, our greatest assets are the expertise, creativity, and passion of our employees. We strive to provide a workplace that attracts, develops, and retains the best talent, fosters collaboration, and drives innovation to serve our customers better.</p><br><p>We are guided by our values of Respect, Integrity, Inclusion, Innovation, and Excellence, and we are excited for you to join us and make a difference.</p><br><p><b>Apply Now!</b></p><br><p><span><b><b>Carrier is An Equal <span><span><span><span><span><span><span><span><span><span><span><span><span><span><span>Opportunity/Affirmative</span></span></span></span></span></span></span></span></span></span></span></span></span></span></span> Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.</b></b></span></p><br><p><b>Job Applicant's Privacy Notice:</b></p><br><p><span>Click on this </span>link<span> to read the Job Applicant's Privacy Notice</span></p><br> </div>

<p>PowerChina HDEC is seeking a detail-oriented and experienced Process Engineer to join our Dubai office, supporting large-scale EPC sewage water treatment projects. Relocation to Dubai, UAE residency visa and medical insurance will be provided to successful candidates. Main responsibilities include, but are not limited to: • Participate in pre-bid meetings, site inspections, and client consultations to capture critical project data, design constraints, and effluent quality and reuse requirements. • Review tender documents, guide/ prepare RFIs and technical clarifications, and conduct risk assessments to identify execution challenges and define mitigation strategies across bid and project stages. • Guide/ Develop and maintain PFDs and P&IDs with precise mass and energy balances and control descriptions across all treatment stages — including primary clarification, activated sludge, anaerobic digestion, and biogas processing. • Guide/ Develop and refine Process Flow Diagrams (PFDs) and Piping and Instrumentation Diagrams (P&IDs), ensuring precise mass and energy balances, control description across all treatment stages—including primary clarification, activated sludge, anaerobic digestion, and biogas processing. • Size and specify process equipment for primary, secondary, and tertiary treatment phases, sludge dewatering, and biogas handling systems — including power and chemical consumption estimation to meet discharge and reuse standards. • Ensure all process designs comply with international best practices and local authority standards (HI, ASME, AWWA, ISO, IFC, DEWA, ADDC, SEC), including hazardous area, safety, and emissions regulations. • Supporting/ leading Evaluation of vendor proposals, technical drawings, and equipment specifications — providing process inputs for layout, general arrangement drawings, and recommendations to Procurement and Project Management teams. • Collaborate with engineering, project management, commissioning, and supply chain teams; participate in HAZID/HAZOP reviews and incorporate all safety recommendations into the design.</p><p>• Bachelor's or Master's Degree in Chemical / Environmental Engineering (or equivalent) • Minimum of 10 years of relevant engineering execution experience. • Experience delivering studies, feasibility, concept designs and detail design in waste water treatment solutions in the municipal sector or industrial sector, such as primary treatments, secondary treatments, tertiary treatments (filtration, clarification, chemical dosing, P removal, ASP, MBBR, MBR, and other advanced biological treatments). • The ability to prepare and/or review comprehensive process design package deliverables, including technical specifications, design calculations, engineering reports, equipment datasheets, process control philosophies, P&IDs, mass balance diagrams, and related documentation. • Expertise in process design software (such as GPS-X, BioWin) to simulate biological nutrient removal (BNR) and plant performance under varying load conditions for optimisation. • Proven expertise in developing and reviewing the comprehensive Hydraulic Grade Lines (HGL) to ensure seamless gravity-driven flow across primary, secondary, and tertiary treatment stages, with a focus on optimising the energy consumption & CAPEX. • Ability to travel and visit operational works and construction sites as required, and to assess existing and new process performance. • Strong project integration skills, including cost estimation, vendor evaluation, and stakeholder coordination, with the ability to communicate complex technical issues clearly and resolve challenges decisively under project pressure. • Ability to prepare and evaluate technical proposals, RFPs, BOQs, specifications, and tender documents for electrical and instrumentation systems. • Excellent technical writing and documentation skills for preparing engineering reports, compliance statements, and design justifications. • Experience in AutoCAD, reviewing on 3D tool, MS Office applications (or equivalent) such as Word, Excel, and PowerPoint.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>ROLE OVERVIEW:</strong></p><br><p>The Show Technology Team Leader is responsible for supervising daily maintenance activities and ensuring reliable operation of AVL systems within assigned rides and attractions. This role provides direct technical leadership to senior technicians and technicians, ensuring preventive and corrective maintenance tasks are executed safely, efficiently, and in accordance with departmental standards. The Team Leader reports to the Show Technology - Assistant Manager and supports operational continuity at site level.</p><br><p><br><strong>ROLE SCOPE:</strong></p><br><p>• Supervise technicians and senior technicians during assigned shifts.&nbsp;<br>• Allocate work orders and prioritize tasks based on operational requirements.<br>• Monitor ride uptime and ensure timely response to technical issues.&nbsp;<br>• Escalate major faults or systemic risks to Assistant Manager / Manager.&nbsp;<br>• Conduct shift handovers and maintain clear communication between teams.&nbsp;<br>• Ensure preventive and corrective maintenance tasks are completed in accordance with SOPs and maintenance plans.&nbsp;<br>• Verify work quality and ensure accurate closure of work orders in CMMS.&nbsp;<br>• Review and maintain technical documentation and system records.&nbsp;<br>• Identify recurring faults and provide structured feedback for maintenance improvement.&nbsp;<br>• Provide advanced troubleshooting support for show control, projection, audio, lighting, special effects, animatronics, and AVL network systems.&nbsp;<br>• Lead fault diagnostics for complex or recurring technical issues.&nbsp;<br>• Support configuration, calibration, and testing activities.&nbsp;<br>• Assist in installation and upgrade works under supervision.&nbsp;<br>• Enforce adherence to safety procedures and safe working practices.&nbsp;<br>• Conduct toolbox talks and shift briefings as required.&nbsp;<br>• Ensure proper use of PPE and safe handling of equipment.&nbsp;<br>• Support risk assessments and safe system of work implementation.&nbsp;<br>• Monitor team performance during shifts and provide feedback to Assistant Manager / Manager.&nbsp;<br>• Support onboarding and technical training of new team members.&nbsp;<br>• Promote adherence to departmental technical standards.&nbsp;<br>• Maintain discipline and professional conduct within the team.&nbsp;<br>• Monitor spare parts usage for assigned systems.&nbsp;<br>• Ensure tools and test equipment are properly maintained.&nbsp;<br>• Notify management of stock shortages or abnormal consumption.&nbsp;<br>• Responsibilities may extend to additional operational duties required to support site-level objectives.</p><br><p><strong>QUALIFICATIONS, EXPERIENCE AND SKILLS:</strong></p><br><p><strong>Essential:</strong></p><br><p>• Diploma or Bachelor’s Degree in Electrical, Electronics, Mechatronics, Computer Engineering, or related technical discipline.<br>• 5–7 years of AVL technical experience.&nbsp;<br>• Minimum 1–2 years in a senior technician or supervisory role.&nbsp;<br>• Experience working within ride or attraction AVL environments.<br>• Strong working knowledge of ride-integrated AVL systems.&nbsp;<br>• Proficiency in at least one professional show control platform.&nbsp;<br>• Solid understanding of AVoIP and AV networking fundamentals.&nbsp;<br>• Strong troubleshooting and fault diagnosis capability. • Experience using CMMS platforms.&nbsp;<br>• Ability to supervise and coordinate technical teams during shifts.&nbsp;<br>• Strong communication skills in English.&nbsp;<br>• Ability to work effectively under operational pressure.&nbsp;<br>• Strong working knowledge in one or more of the following AVL domains: projection systems, professional audio systems (e.g., QSC), AVoIP technologies (e.g., Dante), show control platforms, and media server environments.&nbsp;<br>• Ability to troubleshoot and support integrated ride and show control systems.&nbsp;<br>• Working knowledge of Microsoft 365 applications for reporting and communication.&nbsp;<br>• Proficiency in using CMMS platforms (e.g., Maximo or equivalent) for work order management, documentation, and maintenance tracking.</p><br><br>Miral Experiences </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Key Responsibilities：</b></p><p><b>1. Team &amp; Technical Leadership:</b></p><p>1) Lead, mentor, and manage a mixed team of ~10 mechanical and electronic service engineers.</p><p>2) Act as the primary technical expert and final escalation point for all complex diagnostic and repair challenges.</p><p>3) Plan and manage engineer schedules, dispatching the right skills for 24/7 emergency call-outs, planned maintenance, and major projects.</p><p>4) Conduct regular performance reviews, identify training needs, and develop the technical competency of the team.</p><p>5)&nbsp;&nbsp;Foster a strong culture of safety (HSE), quality, and first-time-fix problem-solving.</p><p><br></p><p><b>2. Service Operations Management :</b></p><p>1)&nbsp;&nbsp;Oversee the entire service workflow, from customer call and quotation to job execution and final invoicing.</p><p>2) Ensure all service work (maintenance, repair, overhaul) is executed to OEM (Cummins) standards and meets marine classification society (e.g., DNV, BV, LR) requirements.</p><p>3) Review and approve all technical service reports, ensuring accuracy, clarity, and timely submission to clients.</p><p>4)&nbsp;&nbsp;Implement and optimize service processes to improve response time, efficiency, and Mean Time to Repair (MTTR).</p><p><b>3. Expert Technical Execution (Hands-on) :</b></p><p>1) Personally lead or supervise complex troubleshooting of advanced mechanical issues (e.g., fuel systems, engine performance) and electronic/control systems (e.g., PCC, Deep Sea, AVRs, governors, synchronization).</p><p>2) Plan, scope, and manage major overhaul projects, both on-board vessels and in the workshop, ensuring all tolerances and procedures are met.</p><p>3) Oversee and sign off on the commissioning of new and repaired generator sets, including load bank testing and sea trials.</p><p><b>4. Customer &amp; Commercial Management :</b></p><p>1)&nbsp;&nbsp;Serve as the key technical point of contact for high-value clients, including ship owners, fleet managers, and chief engineers.</p><p>2)&nbsp;&nbsp;Handle and resolve any client escalations or service disputes professionally.</p><p>3) Work closely with the parts and sales teams to provide expert technical scoping for complex repair and overhaul quotations, ensuring profitability and accuracy.</p><p>Skills</p><p><b>Required Qualifications &amp; Experience (Must-Haves) ：</b></p><p>1．Minimum 7-10 years of direct, hands-on field experience specifically with Cummins marine generator sets (e.g., KTA19, KTA38, KTA50, QSK-60, Onan).</p><p>2．Minimum 3 years of experience in a supervisory or management role, leading a technical service team.</p><p>3．Expert-level, proven experience in the following three areas:</p><p><b>1) Troubleshooting:</b>&nbsp;&nbsp;Advanced diagnostics of complex mechanical failures AND electronic control systems.</p><p><b>2) Overhaul:&nbsp;</b>&nbsp;Proven experience managing or leading full "major" engine overhauls.</p><p><b>3) Commissioning:&nbsp;&nbsp;</b>Onboard&nbsp;&nbsp;installation,&nbsp;&nbsp;paralleling / synchronization,&nbsp;&nbsp;and load testing.</p><p><b>4．Essential:&nbsp;&nbsp;Expert-level proficiency with Cummins diagnostic software</b>&nbsp;&nbsp;(e.g., Cummins Insite, Incal) and related diagnostic tools.</p><p>5．Strong knowledge of marine electrical systems, power generation, and protection relays.</p><p>6．Valid UAE Driver's License and willingness to travel to ports/vessels across the UAE.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>1．Bachelor’s degree in marine, Mechanical, or Electrical Engineering is preferred.</p><p>2．Formal Cummins OEM training and certifications.</p><p>3．Experience in the Dubai / UAE marine services market.</p><p>4．Strong leadership, communication, and customer-facing skills.</p><p>5．Ability to work under pressure in a fast-paced, 24/7 industry.</p></div>

Job description:<br><br> Job Purpose To support the implementation of HSE systems and practices by performing advanced risk assessments, monitoring site conditions, and ensuring compliance with health, safety, and environmental regulations. The role contributes technical expertise to improve HSE standards and supports emergency preparedness and response activities. Key Accountability Areas HSE Compliance and Risk Management Conduct detailed HSE risk assessments and evaluate protection and prevention measures. Validate protection systems and verify compliance with international standards and company policies. Identify hazards, assess risks, and recommend corrective measures to reduce incidents. Integration into Operations Apply HSE requirements within engineering and operational processes. Review technical documentation and designs to verify safety considerations and environmental compliance. Training and Awareness Prepare HSE awareness content and support the delivery of training sessions. Provide technical information to employees and contractors to ensure understanding of safety rules. Emergency Preparedness Develop and maintain emergency response plans and participate in drills and exercises. Support the preparation of site evacuation procedures and response materials. Monitoring and Reporting Perform HSE inspections and collect data on compliance and site conditions. Prepare HSE reports with detailed findings and recommend corrective actions. Site Inspections and Audits Carry out on-site audits, inspections, and safety checks to ensure adherence to standards. Record and document observations, highlighting risks and required improvements. Technical Documentation Draft and maintain HSE documentation, incident logs, and analysis reports. Support the preparation of root-cause analyses and recommendations after incidents. Continuous Improvement Research and suggest updates to HSE procedures based on industry best practices. Analyze incident trends and propose enhancements to safety systems. Role Accountability HR Proficiency: Ability to obtain updated soft and technical skills related to the job Delivery: Perform the planned activities to meet the operational and development targets as per delivery schedules. Utilize resources effectively to achieve objectives within efficient cost and time. Provide a periodic report formatted by detailing the deviation and execution of planned tasks. Problem-Solving: Solve any related problems arise and escalate any complex operational issues. Quality: Ensure quality requirements to develop effective quality control and processes including specifications for products or processes or related activities. Business Process Improvements: Coordinate well-defined written systems, policies, procedures, and seek automations opportunities as much as possible. Compliance: Comply to related policy and procedures and work instructions. Health, Safety, and Environment: Ensure compliance of relevant safety, quality, and environmental management procedures and controls within defined area of work activity to guarantee safety, legislative compliance, and delivery of high-quality products/services. Academic Qualification Bachelor Degree in Safety Engineering or Any relevant field Work Experience 4 to 6 Years Technical / Functional Competencies Safety Awareness and Compliance Safety Reviews and Inspections <br><br>Profile description:<br><br>Alfanar is a Saudi company with an international presence, primarily engaged in the manufacturing and trading of a wide variety of low, medium, and high voltage electrical products, in addition to its portfolio of conventional and renewable energy solutions, oil and gas, water treatment, infrastructure, technical services, and digital solutions. The hub of alfanar’s manufacturing operations is Medinet alfanar Alsinaiya, a 700,000 square-meter complex located in Riyadh. The complex houses an array of ultra-modern manufacturing facilities and laboratories equipped with state-of-the-art technologies and staffed with highly skilled professionals. alfanar derives its success from its commitment to providing the highest quality standards to its customers, and the continuous development of its human capital, who alfanar considers its most valuable asset. With this in mind, alfanar promotes a proactive work environment where its employees are always valued, nurtured, and empowered to fuel their pride in being part of alfanar. For more information about alfanar, please visit alfanar.com

<ul><li><p>Supervise and coordinate MEP engineering and installation activities throughout the project lifecycle.</p></li><li><p>Review project specifications, drawings, BOQs, contract documents, and technical requirements to ensure compliance with project objectives.</p></li><li><p>Coordinate mechanical, electrical, HVAC, plumbing, firefighting, fire alarm, ELV, BMS, and other MEP systems.</p></li><li><p>Review MEP shop drawings, design calculations, material submittals, method statements, and technical submissions.</p></li><li><p>Ensure MEP installations are executed in accordance with approved drawings, specifications, method statements, and applicable standards.</p></li><li><p>Coordinate with civil, structural, architectural, BIM, and other engineering teams to resolve design interfaces and avoid clashes.</p></li><li><p>Participate in design coordination and constructability reviews and identify potential issues before site execution.</p></li><li><p>Coordinate with consultants, clients, subcontractors, suppliers, and site teams on technical and engineering matters.</p></li><li><p>Monitor site installation activities and verify that works are progressing according to approved schedules and project requirements.</p></li><li><p>Inspect MEP installations and ensure proper workmanship, equipment installation, routing, supports, access, and clearances.</p></li><li><p>Coordinate with QA/QC teams for inspections, testing, documentation, and closure of NCRs and site observations.</p></li><li><p>Review technical queries, RFIs, design changes, and site issues and coordinate timely resolution.</p></li><li><p>Coordinate procurement and technical evaluation of MEP equipment and materials.</p></li><li><p>Review vendor drawings, technical data sheets, equipment schedules, and compliance documentation.</p></li><li><p>Monitor material availability and ensure MEP materials and equipment are delivered in line with construction requirements.</p></li><li><p>Coordinate testing and commissioning activities for HVAC, electrical, plumbing, firefighting, fire alarm, ELV, BMS, and associated systems.</p></li><li><p>Review testing and commissioning procedures, test reports, balancing reports, and performance results.</p></li><li><p>Coordinate with relevant UAE authorities and utility providers for inspections, approvals, testing, and connections where applicable.</p></li><li><p>Ensure MEP works comply with relevant UAE codes, authority requirements, project specifications, and international standards.</p></li><li><p>Monitor project progress and provide regular updates on MEP activities, technical issues, risks, and required actions.</p></li><li><p>Assist the Project Manager in planning manpower, materials, equipment, and subcontractor requirements.</p></li><li><p>Support preparation and review of MEP progress reports, schedules, technical reports, and project documentation.</p></li><li><p>Monitor subcontractor performance and ensure compliance with approved designs, quality standards, HSE requirements, and project schedules.</p></li><li><p>Ensure proper implementation of HSE requirements, risk assessments, permit-to-work procedures, and safe working practices.</p></li><li><p>Participate in snagging, rectification, final inspections, testing, commissioning, and handover activities.</p></li><li><p>Review and ensure completion of as-built drawings, O&M manuals, warranties, test certificates, and other handover documents.</p></li><li><p>Provide technical guidance and mentoring to engineers, supervisors, and site teams.</p></li><li><p>Identify opportunities for value engineering, energy efficiency, cost optimization, and improved construction methods.</p></li><li><p>Maintain accurate engineering records and ensure proper document control throughout the project.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong knowledge of MEP design, installation, testing, and commissioning.</p></li><li><p>Good understanding of HVAC, electrical, plumbing, drainage, firefighting, fire alarm, ELV, and BMS systems.</p></li><li><p>Ability to read and interpret MEP drawings, schematics, specifications, BOQs, and technical documentation.</p></li><li><p>Strong multidisciplinary coordination and clash-resolution skills.</p></li><li><p>Knowledge of BIM coordination and MEP design coordination processes.</p></li><li><p>Good understanding of UAE authority requirements and MEP standards.</p></li><li><p>Strong knowledge of QA/QC procedures and HSE requirements.</p></li><li><p>Good project planning, site supervision, and subcontractor coordination skills.</p></li><li><p>Strong technical problem-solving and analytical abilities.</p></li><li><p>Excellent communication and stakeholder-management skills.</p></li><li><p>Proficiency in AutoCAD, MS Office, and relevant MEP engineering software.</p></li><li><p>Familiarity with Primavera P6/MS Project will be an advantage.</p></li></ul><p>Qualifications & Experience</p><ul><li><p>Bachelor’s degree in <strong>Mechanical Engineering, Electrical Engineering, MEP Engineering, or a related discipline</strong>.</p></li><li><p><strong>8–12 years of relevant MEP engineering experience</strong>, preferably in large-scale building, infrastructure, commercial, residential, hospitality, industrial, or EPC projects.</p></li><li><p>Strong experience in MEP installation, coordination, testing, and commissioning.</p></li><li><p>Experience managing MEP subcontractors, consultants, vendors, and multidisciplinary project teams.</p></li><li><p>UAE/GCC experience is highly preferred.</p></li><li><p>Experience working on projects in <strong>Dubai and Abu Dhabi</strong> and familiarity with local authority requirements will be an advantage.</p></li><li><p>Professional engineering certification or relevant MEP certification will be an added advantage.</p></li></ul><p>Key Performance Areas</p><ul><li><p>Timely execution of MEP engineering and installation activities.</p></li><li><p>Compliance with approved designs, specifications, and authority requirements.</p></li><li><p>Quality of MEP installations and timely closure of defects/NCRs.</p></li><li><p>Effective multidisciplinary coordination and clash resolution.</p></li><li><p>Successful testing and commissioning of MEP systems.</p></li><li><p>Efficient management of materials, subcontractors, and site resources.</p></li><li><p>Compliance with HSE requirements.</p></li><li><p>Successful completion and handover of MEP works.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job FOOTBALL COACH <p>Provide coaching and develop technical plans and training </p><br> <p>programs. </p><br> <p> Ability to organize and manage sports tournaments and </p><br> <p>competitions. </p><br> <p> Train students and develop their technical skills in the </p><br> <p>fundamentals of football.</p><br><p><span>Identify talented students and enhance their skills and&nbsp;</span><span>abilities.</span></p><br><p>Prepare player lists, participant records, performance <br>statistics, and team reports. <br> Monitor players' physical and health conditions and ensure <br>the implementation of safety procedures during training <br>sessions and competitions. <br> Organize and supervise university football team training <br>sessions, friendly matches, and competitions. <br> Promote teamwork, discipline, and commitment among <br>players, and motivate them to achieve the highest levels of <br>athletic performance.</p><br><p>Qualification:&nbsp;Holds a valid coaching license accredited by the Asian <br>Football Confederation (AFC) or an equivalent certification. <br> Holds a valid First Aid certification.</p><br><p>Full time</p><br> <br> <br> </div>

<ul><li>Oversee and manage all on-site construction activities, ensuring adherence to project plans, specifications, and quality standards.</li><li>Coordinate and direct subcontractors, vendors, and site personnel to optimize workflow and resource allocation.</li><li>Implement and enforce stringent safety protocols and procedures to maintain a secure work environment and prevent accidents.</li><li>Conduct regular site inspections and progress monitoring, identifying and resolving any technical issues or deviations from the schedule.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil Engineering, Construction Management, or a related field.</li><li>Professional Engineer (PE) license or equivalent certification.</li><li>Minimum of 5 years of progressive experience in site engineering or construction supervision.</li><li>Proven experience in managing complex construction projects within the [Specify Industry, e.g., infrastructure, commercial, residential] sector.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Lead the design and implementation of complex technical solutions to optimize business processes, ensuring alignment with strategic objectives.</li><li>Translate business requirements into detailed technical specifications and architectural blueprints for process automation and integration.</li><li>Mentor and guide a team of technical resources, fostering a collaborative environment and ensuring high-quality deliverables.</li><li>Oversee the development and execution of robust testing strategies to validate the effectiveness and efficiency of implemented solutions.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's or Master's degree in Computer Science, Information Technology, Engineering, or a related field.</li><li>Minimum of 7 years of progressive experience in business process analysis and technical solution design.</li><li>Proven track record of leading technical teams and successfully delivering complex process improvement projects.</li><li>Expertise in business process modeling notations (BPMN) and workflow automation tools (e.g., Pega, Appian, ServiceNow).</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Prepare accurate cost estimates for furniture and joinery projects.</p></li><li><p>Review technical drawings, specifications, and BOQs to determine project requirements.</p></li><li><p>Perform quantity take-offs and prepare material and labor cost estimates.</p></li><li><p>Coordinate with the design, production, procurement, and project teams to obtain required information.</p></li><li><p>Request and evaluate supplier and subcontractor quotations.</p></li><li><p>Assist in preparing tender submissions, quotations, and cost proposals.</p></li><li><p>Maintain estimation records and update cost databases.</p></li><li><p>Ensure estimates are completed within the required deadlines while maintaining accuracy.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>1–3 years of experience in furniture and joinery estimation.</p></li><li><p>Good understanding of furniture manufacturing and joinery materials.</p></li><li><p>Ability to read and interpret technical drawings and BOQs.</p></li><li><p>Proficiency in Microsoft Excel; knowledge of estimation software is an advantage.</p></li><li><p>Strong analytical, organizational, and communication skills.</p></li><li><p>Ability to work independently and manage multiple estimation tasks.</p></li></ol><p></p></section>

The role of Chemist at a leading beverages company is responsible to monitor and ensure the products produced are meeting the internal governance and quality management system and legal requirements. Ensure QA testing parameters were done accurately & documented according to the company’s standards/requirements.<br>Key Responsibilities Comply with internal governance and quality management system, Health, Safety, and Environmental (HSE) requirements, company policies, laboratory safety procedures, chemical handling guidelines, pollution control standards, and all applicable regulatory requirements while performing testing, analysis, and related laboratory activities. Maintaining Taste, Appearance Satisfaction at 100%Maintaining Brix and GV Satisfaction at 100%Maintain micro-Satisfaction at 100%Maintaining date code Satisfaction at 100%Maintaining closure function Satisfaction at 100%Maintaining Net Content Satisfaction at 100%MQI- 100 (YTD) Maintaining Brix & GV Cpk ≥ 1.33 for all run and all flavour by using Carbo QCMaintaining Net Content Cpk ≥ 1.33 for all run and all flavour Maintaining R T Cpk ≥ 1.33 for all run and all flavour Maintaining PET wall thickness Cpk ≥ 1.33 for all run and all flavour by using stress crack analyser Conducting 2 successful Internal Audits Preparation and Implementation of CAP’s Sustenance of QMS, FSMS, HACCP, EMS and OHSAS certifications without any minor non-conformance. Derive and implementation of CAPs after RCA for the non-confirming product and complete within the time frame.100 % segregation and isolation of the non-confirming product100% Adherence to Company policy, procedures and Kore requirements Follow GMP, hygiene, and food safety requirements. Maintain cleanliness of work areas and prevent contamination of products, ingredients, packaging materials, and equipment. Use approved materials, tools, and ensure all work does not compromise product quality or food safety. Report any condition that may impact product quality, food safety, or GMP compliance.<br>Role Qualifications Education - Bachelor's Degree in Chemistry, Biology, Food Technology and Chemical Engineering2 – 5 years’ experience in the beverages, water, dairy, fruit juice or pharmaceutical plants

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking a highly qualified and experienced Consultant Plastic Surgeon to join a leading healthcare facility.<br> The successful candidate will provide comprehensive plastic and reconstructive surgical care, perform cosmetic and reconstructive procedures according to their expertise, and deliver safe, high-quality, patient-centered care.<br> Key Responsibilities Conduct comprehensive consultations, clinical assessments, and pre-operative evaluations.<br> Diagnose and manage patients requiring cosmetic, reconstructive, and plastic surgical procedures.<br> Perform a wide range of plastic and reconstructive surgeries according to qualifications and clinical expertise.<br> Perform cosmetic procedures including facial rejuvenation, body contouring, breast surgery, and other aesthetic procedures where qualified.<br> Perform reconstructive procedures following trauma, burns, cancer surgery, congenital conditions, and tissue loss.<br> Manage complex wounds, scars, soft-tissue defects, and post-surgical complications.<br> Develop individualized surgical plans based on patient expectations, clinical needs, and medical suitability.<br> Provide comprehensive pre-operative and post-operative care and monitor patient recovery.<br> Manage surgical complications and provide appropriate intervention when required.<br> Interpret relevant laboratory investigations and diagnostic imaging.<br> Counsel patients regarding treatment options, expected outcomes, risks, benefits, and post-operative care.<br> Collaborate with dermatologists, oncologists, general surgeons, ENT specialists, oral and maxillofacial surgeons, anesthesiologists, and other specialists.<br> Maintain accurate patient records, operative notes, consent forms, and clinical documentation.<br> Supervise and mentor junior surgeons and clinical staff where required.<br> Participate in multidisciplinary meetings, clinical audits, quality improvement initiatives, and Continuing Medical Education (CME).<br> Ensure compliance with relevant healthcare authority regulations, hospital policies, infection control standards, and patient safety protocols.<br> Participate in on-call duties and emergency surgical coverage as required.<br> Qualifications &amp; Requirements MBBS or equivalent medical degree from a recognized institution.<br> MS / MCh / FRCS / American Board / Arab Board or equivalent recognized postgraduate qualification in Plastic &amp; Reconstructive Surgery .<br> Minimum 5 years of post-specialization experience , including significant Consultant-level experience .<br> Strong experience in cosmetic and reconstructive plastic surgery.<br> Proven expertise in complex surgical procedures and patient management.<br> Excellent surgical skills, clinical judgment, leadership, communication, and decision-making abilities.<br> Ability to work effectively within a multidisciplinary healthcare team.<br></span> </div>

<br><p>We are looking for an experienced <strong>QA/QC Engineer</strong> to join our high-rise building construction projects. The QA/QC Engineer will be responsible for ensuring that construction activities, materials, workmanship, and completed works comply with approved drawings, project specifications, contract requirements, applicable building codes, and quality standards.</p><p>The role will cover quality assurance, quality control, material inspections, structural and architectural inspections, MEP coordination, testing, documentation, NCR management, and project handover.</p><p><strong>Key Responsibilities</strong><br>1. Quality Assurance</p><ul><li><p>Develop, implement, and maintain the <strong>Project Quality Plan (PQP)</strong>.</p></li><li><p>Prepare and maintain <strong>Inspection and Test Plans (ITPs)</strong> for project activities.</p></li><li><p>Review method statements, work procedures, and quality requirements.</p></li><li><p>Ensure compliance with project specifications, contract requirements, approved drawings, and applicable codes and standards.</p></li><li><p>Conduct internal quality audits and monitor implementation of the Quality Management System (QMS).</p></li><li><p>Conduct quality awareness and training sessions for site personnel.</p></li><li><p>Identify potential quality risks and implement preventive measures to avoid defects and rework.</p></li></ul><p>2. Quality Control & Site Inspections</p><ul><li><p>Conduct inspections before, during, and after construction activities.</p></li><li><p>Verify that all works comply with approved shop drawings, specifications, and project requirements.</p></li><li><p>Carry out stage inspections for structural, architectural, finishing, and other construction activities.</p></li><li><p>Coordinate inspections with consultants, clients, and relevant project teams.</p></li><li><p>Witness required testing activities and ensure results meet specified requirements.</p></li><li><p>Identify quality issues and ensure corrective actions are implemented.</p></li></ul><p>3. Material Inspection & Control</p><ul><li><p>Inspect incoming construction materials and verify compliance with approved material submittals.</p></li><li><p>Check manufacturer certificates, test certificates, and other required documentation.</p></li><li><p>Ensure only approved materials are used on the project.</p></li><li><p>Raise concerns and initiate rejection of non-conforming materials where required.</p></li><li><p>Inspect materials including concrete, reinforcement steel, structural steel, waterproofing materials, masonry blocks, tiles, paint, aluminum, glass, fire-rated materials, and other construction products.</p></li></ul><p>4. Structural Works Inspection</p><p>Inspect and verify the quality of:</p><ul><li><p>Excavation and foundation works</p></li><li><p>Reinforcement and formwork</p></li><li><p>Embedded items</p></li><li><p>Concrete pouring and curing</p></li><li><p>Columns, beams, slabs, and shear walls</p></li><li><p>Core walls and lift shafts</p></li><li><p>Staircases</p></li><li><p>Roof structures</p></li><li><p>Other structural elements</p></li></ul><p>5. Concrete Quality Control</p><ul><li><p>Verify approved concrete mix designs before use.</p></li><li><p>Inspect reinforcement and formwork before concrete casting.</p></li><li><p>Check formwork dimensions, levels, and alignment.</p></li><li><p>Witness concrete slump tests and cube sampling.</p></li><li><p>Monitor concrete placement, vibration, and curing.</p></li><li><p>Review laboratory test results and ensure compliance with project requirements.</p></li><li><p>Maintain complete records of concrete testing and inspection activities.</p></li></ul><p>6. Architectural & Finishing Works</p><p>Inspect and monitor the quality of:</p><ul><li><p>Blockwork</p></li><li><p>Plastering</p></li><li><p>Waterproofing</p></li><li><p>Screeding</p></li><li><p>Tiling</p></li><li><p>Marble installation</p></li><li><p>Painting</p></li><li><p>False ceilings</p></li><li><p>Doors and windows</p></li><li><p>Façade works</p></li><li><p>Roofing</p></li><li><p>Sealants</p></li><li><p>Flooring and other finishing works</p></li></ul><p>7. MEP Quality Coordination</p><p>Coordinate quality inspections for:</p><ul><li><p>Electrical conduits and embedded services</p></li><li><p>Plumbing sleeves and pipework</p></li><li><p>HVAC openings and installations</p></li><li><p>Fire protection systems</p></li><li><p>Embedded pipes</p></li><li><p>Cable trays</p></li><li><p>Builder's work requirements</p></li><li><p>MEP works prior to concrete casting and other critical construction activities</p></li></ul><p>8. Inspection Requests & Consultant Coordination</p><ul><li><p>Prepare and submit <strong>Inspection Requests (IRs)</strong> in accordance with project requirements.</p></li><li><p>Coordinate inspections with consultants and client representatives.</p></li><li><p>Address and close inspection comments within agreed timelines.</p></li><li><p>Maintain complete inspection records and supporting documentation.</p></li><li><p>Coordinate with site teams to ensure works are ready for inspection.</p></li></ul><p>9. Testing & Commissioning</p><p>Coordinate and witness required testing activities, including:</p><ul><li><p>Concrete compressive strength testing</p></li><li><p>Reinforcement testing</p></li><li><p>Waterproofing tests</p></li><li><p>Field density tests</p></li><li><p>Pull-out tests</p></li><li><p>Fire-stopping inspections</p></li><li><p>Functional testing of MEP systems</p></li><li><p>Final testing and commissioning activities</p></li></ul><p>10. NCR & Corrective Action Management</p><ul><li><p>Identify and raise <strong>Non-Conformance Reports (NCRs)</strong> for non-compliant works.</p></li><li><p>Investigate the root causes of quality issues.</p></li><li><p>Recommend corrective and preventive actions.</p></li><li><p>Coordinate with responsible teams to implement corrective actions.</p></li><li><p>Verify completion and effectiveness of corrective actions.</p></li><li><p>Close NCRs after successful verification and approval.</p></li></ul><p>11. Quality Documentation & Reporting</p><p>Maintain accurate and up-to-date quality records, including:</p><ul><li><p>Project Quality Plans</p></li><li><p>Inspection and Test Plans</p></li><li><p>Method Statements</p></li><li><p>Material Approval Requests (MARs)</p></li><li><p>Material Inspection Requests (MIRs)</p></li><li><p>Inspection Requests (IRs)</p></li><li><p>Non-Conformance Reports (NCRs)</p></li><li><p>Site Observation Reports (SORs)</p></li><li><p>Requests for Information (RFIs)</p></li><li><p>Test Reports</p></li><li><p>Calibration Certificates</p></li><li><p>Daily Inspection Reports</p></li><li><p>As-built quality records</p></li><li><p>Snag lists</p></li><li><p>Quality dossiers</p></li><li><p>Project handover documentation</p></li></ul><p>12. Coordination</p><p>Work closely with:</p><ul><li><p>Project Manager</p></li><li><p>Construction Manager</p></li><li><p>Site Engineers</p></li><li><p>Consultants</p></li><li><p>Client representatives</p></li><li><p>MEP Engineers</p></li><li><p>Surveyors</p></li><li><p>Material suppliers</p></li><li><p>Testing laboratories</p></li><li><p>Subcontractors</p></li><li><p>Safety officers</p></li></ul><p>Participate in quality meetings, coordination meetings, technical discussions, and site inspections as required.</p><p>13. Handover & Project Close-Out</p><ul><li><p>Prepare and monitor snag and punch lists.</p></li><li><p>Verify completion of corrective and outstanding works.</p></li><li><p>Conduct final quality inspections.</p></li><li><p>Compile complete quality dossiers and handover documentation.</p></li><li><p>Ensure all inspection and testing records are properly closed.</p></li><li><p>Support project completion, handover, and occupancy certification requirements where applicable.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree in <strong>Civil Engineering, Construction Engineering, or a related discipline</strong>.</p></li><li><p><strong>5+ years of experience</strong> in QA/QC within the building construction industry.</p></li><li><p>Experience in <strong>high-rise building projects</strong> is highly preferred.</p></li><li><p>UAE/GCC construction experience is an advantage.</p></li><li><p>Strong experience in structural, architectural, finishing, and MEP quality coordination.</p></li><li><p>Good knowledge of construction materials, concrete technology, testing, inspection procedures, and construction methodologies.</p></li><li><p>Experience coordinating inspections with consultants and clients.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Join Fulkrum – Be Part of a Global Success Story</span></p><br> <p>Fulkrum is a global leader in inspection, expediting, auditing, and technical staffing services, delivering exceptional solutions to the energy, engineering, and construction industries for over 14 years. Headquartered in the UK, we have established a strong presence across six continents, serving more than 300 clients worldwide.</p><br> <p>Our commitment to excellence has been recognised with prestigious awards, including the King’s Award for Enterprise in International Trade (2023), the People and Competency Award at the EIC Awards (2023), and the Scale-Up Award at the WESCA North America Awards (2024).</p><br> <p>Our Middle East Region is currently seeking a proactive and detail-oriented <span>Head of Integrity / Asset Integrity &amp; Consultancy Services Manager </span>to join our team and support our operational functions.</p><br> <p><span>Role Overview:</span></p><br> <p>The Asset Integrity and Consultancy Services Manager is responsible for developing and leading Fulkrum’s global asset integrity and consultancy offerings. As part of the Senior Leadership Team, this individual will shape, grow, and deliver strategic services that include asset integrity management, engineering consultancy, and specialist technical advisory solutions to clients across all sectors and regions. The role demands both technical and commercial expertise to build service capability, develop high-value client relationships, and ensure technical excellence and compliance with industry standards.</p><br> <p>This role has a global remit and will collaborate closely with Regional Managers, Operations Managers, and Business Development teams to align asset integrity offerings with Fulkrum’s wider service portfolio.</p><br> <p><span><span>Main Duties (including but not limited to):</span></span></p><br> <p><span>General </span></p><br> <ul> <li>Develop, lead, and execute Fulkrum’s global strategy for Asset Integrity and Consultancy Services.</li> <li>Drive increased revenue and profit within the Division to achieve the Company`s growth plans.</li> <li>Willingness and ability to travel internationally to support client engagements, site visits, and operational reviews as required.</li> <li>Support SLT in setting and delivering strategic objectives tied to service quality, client satisfaction, and commercial growth.</li> <li>Collaborate across departments to ensure seamless integration of asset integrity services into Fulkrum’s broader technical offering (VSS, TSS).</li> <li>Support implementation and maintenance of ISO 17020 accreditation across regions/countries.</li> <li>Represent Fulkrum at conferences, technical forums, client reviews, and industry events.</li> </ul> <p><span>Operational, Service Delivery, and Technical Oversight</span></p><br> <ul> <li>Provide subject matter expertise and technical governance across all asset integrity and consultancy scopes.</li> <li>Oversee preparation and execution of AIM and consultancy scopes such as, but not limited to: RBI, FFS, corrosion assessments, pipeline integrity, inspection planning, and failure investigations.</li> <li>Establish internal processes, tools, and systems to ensure consistent and compliant service delivery.</li> <li>Monitor technical performance through quality metrics, KPIs and audit programs.</li> <li>Ensure delivery is aligned with industry best practices and codes (API, ASME, DNV, ISO, etc.).</li> <li>Business/Division cost tracking and management of standalone P&amp;L</li> </ul> <p><span>Client and Project Management</span></p><br> <ul> <li>Engage with clients to understand technical requirements, scope opportunities, and tailor service offerings.</li> <li>Serve as a key point of contact for strategic clients in consultancy and asset integrity domains.</li> <li>Develop and maintain project execution plans, budgets, and timelines for AIM and consultancy projects.</li> <li>Ensure that all technical deliverables meet quality and contractual requirements.</li> <li>Maximize opportunities and scope growth through client retention and engagement initiatives.</li> </ul> <p><span>Team Management and Capability Development</span></p><br> <ul> <li>Build and lead a global team of engineers, inspectors, and consultants to meet project demands.</li> <li>Identify skills gaps and develop training pathways for asset integrity resources.</li> <li>Provide mentoring and technical leadership to regional teams, key account managers and project consultants.</li> <li>Support recruitment and onboarding of personnel for expanding local and global delivery capability.</li> </ul> <p><span>Business Development:</span></p><br> <ul> <li>Conduct market research on potential clients and relevant project opportunities.</li> <li>Identify and develop opportunities for growth in the AIM and consultancy services space across industry sectors and regions.</li> <li>Identify and present defined business opportunities, along with clear market penetration strategies for discussion with the SLT and implementation in collaboration with regional teams</li> <li>Follow up new/existing business opportunities and set up meetings to discuss and secure the work.</li> <li>Track and log all business development activities in SalesForce and ensure the sales pipeline is maintained.</li> <li>Work in conjunction with the Commercial Team to execute registration, pre-qualification, and client-specific approvals with target companies.</li> <li>Take ownership of Technical and Commercial Proposals, supported by the Commercial Team.</li> <li>Attending appropriate conferences, meetings, and industry events.</li> <li>Provide thought leadership in marketing content (PR), technical webinars, white papers, and case studies.</li> </ul> <p><span>Expansion &amp; Strategic Initiatives</span></p><br> <ul> <li>Work with the VP and Board of Directors to develop business plans and strategies to expedite the penetration of new markets.</li> </ul> <ul> <li>Drive continuous improvement across the service line to improve efficiency and client value.</li> <li>Identify, assess, and recommend potential acquisitions and strategic partnerships to enhance Fulkrum’s service offerings, expand geographic reach, or enter new markets</li> <li>Assess and implement new tools, digital platforms, and techniques to enhance service delivery.</li> <li>Benchmark Fulkrum’s services against competitors and industry leaders to maintain a competitive edge.</li> </ul> <p><span>Why Join Us?</span></p><br> <p>This is an exciting opportunity for an experienced Head of Integrity to showcase their skills in a dynamic and supportive environment. At Fulkrum, you will play a vital role in ensuring operational continuity and legal compliance in one of our key global regions.</p><br> <p>We offer a fantastic working environment with a highly engaged team and consistently high eNPS scores. Fulkrum’s continued growth is a testament to our commitment to excellence and innovation. Our team enjoys regular recognition initiatives, a social budget, and a refer-a-friend scheme.</p><br> <p>Join us and contribute to our mission while growing your own career in a high-performance culture.</p><br> <p><span>Apply now and become a valued part of the Fulkrum team.</span></p><br> </div>

We are seeking an experienced Structural Lead / Building Inspector to oversee structural design, building inspections, technical compliance, and structural safety across construction and development projects. Key Responsibilities Lead structural inspections, assessments, design reviews, and technical evaluations. Review structural drawings, calculations, specifications, and construction works for compliance and quality. Identify and assess structural defects, safety issues, construction risks, and remedial requirements. Coordinate with architects, engineers, contractors, consultants, authorities, and project teams. Prepare inspection reports, technical assessments, recommendations, and compliance documentation. Monitor construction quality, structural integrity, and adherence to approved designs and standards. Provide technical guidance on structural issues, repairs, strengthening, and building performance. Requirements & Qualifications Diploma/Degree in Civil Engineering, Structural Engineering, Building Surveying, or a related field. Proven experience in structural engineering, building inspection, structural assessment, or a related senior role. Strong knowledge of structural systems, construction methods, building codes, inspection procedures, and safety standards. Proficient in Auto CAD, Revit, structural analysis software, or relevant technical tools. Strong technical, analytical, communication, reporting, and problem-solving skills. Ability to work effectively with contractors, consultants, authorities, and multidisciplinary project teams. Professional accreditation such as PE, Chartered Engineer, RICS, or equivalent is an advantage. Experience in commercial, residential, infrastructure, or large-scale building projects is preferred.

Location: Abu Dhabi Duration: Yearly renewable contract Role: Senior individual-contributor role leading technical direction and architecture for production AI systems and backend platforms within an AI Factory.<br>Key Responsibilities:Lead AI architecture, system design, and technical strategy across teams. Design production AI systems including RAG, agents, model evaluation, inference and serving. Build/scaling backend platforms, APIs, event-driven systems, Postgre SQL, Kubernetes and Azure infrastructure. Provide hands-on technical leadership and review/write critical code. Mentor senior/staff engineers and raise engineering standards. <br>Must-Have Skills:12+ years software engineering experience at Staff/Principal level. Expert Python; working knowledge of Go/Rust/Java/Kotlin. Strong production AI/LLM, RAG, agents, evaluation and inference experience. Distributed systems and event-driven architecture (Kafka/Azure Service Bus/Event Hubs). Postgre SQL at scale, Docker & Kubernetes. Strong Azure cloud experience: AWS/GCP is a plus. Experience with AI coding agents such as Codex/Claude Code/Open Code. Strong architecture, communication, and technical leadership skills. <br>Preferred:Lang Graph/Lang Chain, v LLM/TGI/Tensor RT-LLM, vector DBs (pgvector/Qdrant/Pinecone), Redis, Elasticsearch/Open Search, AI platform engineering, security/compliance, Arabic/voice AI, and government/regulated-sector experience