Highway (road) Engineer Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Implement quality assurance/quality control management system at vendor/subcontractor site as per approved project quality plan; Inspection and test plans &amp; relevant project specifications. </p></li><li><p>Review of material requisitions, Technical clarifications from vendors and support project team on quality matters. </p></li><li><p>Review &amp; approve of vendor related quality documents (ITP, NDE/Test procedures, quality plans etc). </p></li><li><p>Witness inspections/tests as per approved procedures and inspection plan at vendor works. </p></li><li><p>Coordinate with TPI/client/vendors/subcontractors to schedule inspections and review reports for compliance with respective purchase orders.</p></li><li><p>Follow-up and report status of inspections &amp; testing activities to project team on weekly &amp; monthly basis. </p></li><li><p>Participate in weekly/monthly meetings and respond/resolve any quality related issues. </p></li><li><p>In the role of lead/internal auditor perform audits and issue reports as per the audit schedule. </p></li><li><p>As required develop project specific check lists for jobs to be executed. </p></li><li><p>Track and expedite deliverables from sub-contractor/vendors. </p></li><li><p>Participate in resolution of quality issues and manage all Non-conforming reports.</p></li><li><p>Ability to review and evaluate inspection reports technically in accordance to code/client requirements. </p></li><li><p>Ensure inspection &amp; test reports are maintained and progressively compiled in Manufacturers Record Book (MRB). </p></li><li><p>Review &amp; approve Manufacturers Record Books from Sub-contractors/Vendors. </p></li><li><p>Assist DCC in preparation of Final Manufacturers Record Book for the project.</p></li><li><p>Consistently adhere to the Project Objectives and Priorities, Safety, Regulatory / Environmental, Quality and Schedule expectations. </p></li><li><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualification: </strong></p><ul><li><p>Minimum – Diploma or Bachelor’s degree in Mechanical Engineering. Certifications: </p></li><li><p>AWS-CWI/SCWI or CSWIP 3.1/3.2 </p></li><li><p>ASNT Level-II/III NDT Methods RT, UT, PT, MT </p></li><li><p>ISO 9001-2015-internal/lead auditor </p></li><li><p>Bgas / NACE – Coating inspections (Preferred) </p></li></ul><p><strong>Knowledge: </strong></p><ul><li><p>Proficient on various components-pressure vessels, heat exchangers, valves, pumps and other packaged items. Well versed in Welding process &amp; Techniques; MTC review; NDT-RT, UT, PT, MT, VT; Surface Preparation &amp; Painting Inspections; Pre-commissioning activities; proficient in construction codes &amp; standards ASME, ASTM, AWS, BS, EEMUA, etc. </p></li></ul><p><strong>Experience: </strong></p><ul><li><p>Minimum 12 years of experience as QAQC coordinator/ Engineer on EPC projects within Oil and Gas Industry Skills: </p></li><li><p>Strong analytical skills and problem solving abilities. </p></li><li><p>Strong administrative and organizational skills </p></li><li><p>The job role includes travel(UAE &amp; International), candidate with valid UAE Driving License is mandatory. </p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Automation Service Engineer – Dubai, UAE We empower our people to stay resilient and relevant in a constantly evolving world. We’re looking for people who are always searching for creative ways to grow and learn. People who want to make a real impact, now and in the future. Does that sound like you? Then it seems like you’d make an outstanding addition to our vibrant international team. Siemens Digital Industries is a leading innovator in automation and digitalization. Our mission is to support customers in maximizing growth, profit opportunities and ecological footprint in the discrete and process industries. Ready to create your own journey? Join our Digital Industry as the Automation Service Engineer and help us transform the everyday by finding solutions and making the world a more inquisitive place for tomorrow. You‘ll make an impact by: Design, engineering, implementation, testing, and commissioning of Automation Control Systems. Service, troubleshooting, and maintenance of systems including: PCS7 / DCS Systems ESD Safety Systems F&amp;G Safety Systems Step7, WinCC, Totally Integrated Automation SIMATIC S7 Safety Systems S7-300, S7-400/400H/400FH, S7-1200, S7-1500 R/H Your success is grounded in Design, implement, and commission PCS 7 control systems and SIMATIC S7 Safety Systems for a variety of industrial control system applications Develop PCS 7, TIA, WinCC, STEP 7, and PLC programs based on schematics and customer specifications. Troubleshoot control loops, motor wiring, and industrial instrumentation. Industrial instrumentation selection, configuration, commissioning, and troubleshooting. Design industrial network architectures with a focus on cybersecurity best practices Configure, commission, and troubleshoot industrial network devices and communication protocols Ensure compliance with industry standards and regulations related to industrial control system cybersecurity Perform risk assessments, vulnerability testing, and implement security measures to protect control systems Develop and document cybersecurity policies, procedures, and incident response plans Train operations and maintenance personnel on cybersecurity awareness and best practices Collaborate with cross-functional teams, including IT, operations, and management, to ensure holistic cybersecurity approach Prepare comprehensive documentation, including IO lists, FDS/DDS, system architectures, wiring diagrams, control schematics, SCADA graphics, ESD C&amp;E matrix, FAT/SAT procedures, and O&amp;M manuals Your Qualifications and Skills: Bachelor’s degree in Electrical Engineering, Automation, or a related field Minimum 5+ years of experience in Siemens DCS and SCADA design, programming, commissioning, and troubleshooting Hands-on experience in PCS 7 Safety Systems, STEP 7, WinCC, TIA, and Safety Systems Strong problem-solving, analytical, and troubleshooting skills Excellent client-facing and communication skills, with the ability to work as part of a combined client/contractor team Fair knowledge of industrial control system cybersecurity standards and best practices (e.g., ISA/IEC 62443, NIST SP 800-82) Proficiency in network architecture design, industrial communication protocols, and network security technologies Familiarity with industrial control system vulnerabilities, threat modeling, and risk assessment methodologies Experience in developing and implementing cybersecurity policies, procedures, and incident response plans Willingness to travel and work onshore and offshore as required UAE valid driving license Desirable Skills Experience in developing secure PLC and SCADA programming practices Strong verbal and written communication skills Knowledge of industrial control system forensics and incident response Familiarity with industrial IoT and cloud-based control system architectures Experience in water, wastewater, petrochemical, or oil and gas industries · Certification in industrial control system cybersecurity (e.g., GICSP, CISA, CISSP) will be added value / good to have. You’ll benefit from Diverse and inclusive culture. An environment where everyone can bring their whole self and feel a sense of belonging. the foundation to develop personally and professionally. Extraordinary variety of learning &amp; development opportunities Transform the everyday with us We value your outstanding identity and perspective and are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society. Come bring your authentic self and create a better tomorrow with us. We celebrate the fact that our people are individuals and have different preferences and needs. If we all thought the same, we would never think of anything new! That’s why we recruit extraordinary minds from all walks of life. We are committed to furthering our culture of diversity, equity and inclusion. We encourage applications from a diverse talent pool and are happy to give the opportunity to discuss flexibility and reasonable adjustment requirements. Many of our teams are working optimally in a remote, virtual adding to our ability to offer more flexibility on how you handle your time. Please note: Only complete applications can be considered in the selection process.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Project Engineer to join its UAE business unit focusing on leading the development and delivery of Front-End Engineering Design (FEED) packages for infrastructure facilities.</p><br><p>This role is a full-time on-site role in Dubai, UAE with travel requirement.<br><strong>Reports to: </strong>Project Manager&nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Senior Project Engineer to join its UAE business unit focusing on leading the development and delivery of Front-End Engineering Design (FEED) packages for infrastructure facilities.</p><br><p>This role is a full-time on-site role in Dubai, UAE with travel requirement.<br><strong>Reports to: </strong>Project Manager&nbsp;</p><br><p><i><strong>#Wood #UAE #Dubai #Senior Project Engineer</strong></i></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Senior Project Engineer&nbsp;to join our UAE Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;&nbsp;</li> <li><strong>Group Life and Personal Accident Insurance:&nbsp;</strong>The company provides Life Assurance cover&nbsp;</li> <li><strong>The Employee Share Plan:&nbsp;</strong>Gives you the opportunity to purchase Wood shares and receive a match from the company&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><p>Lead the development and delivery of Front-End Engineering Design (FEED) packages for infrastructure facilities associated with major projects, including logistics bases, fuel storage facilities, roads, utilities, and supporting infrastructure.</p><br><p>The role is responsible for coordinating multidisciplinary engineering activities, ensuring technical excellence, schedule compliance, and successful integration of all engineering disciplines throughout the FEED phase. The position will take overall ownership of infrastructure FEED development and will be supported by discipline engineers.</p><br><p><strong>Key Responsibilities:</strong></p><br><p><strong>FEED Development &amp; Technical Leadership</strong></p><br><ul> <li>Lead the preparation and execution of FEED studies for infrastructure facilities, including:&nbsp; <ul> <li>Logistics bases</li> <li>Fuel storage and distribution systems</li> <li>Roads and transportation networks</li> <li>Utilities and support facilities</li> <li>Site development and associated infrastructure</li> </ul></li> <li>Develop Basis of Design, design philosophies, project specifications, and engineering deliverables.</li> <li>Coordinate multidisciplinary engineering inputs to ensure alignment of design objectives and project requirements.</li> <li>Manage interfaces between civil, structural, mechanical, piping, electrical, instrumentation, and other engineering disciplines.</li> <li>Ensure engineering solutions are technically sound, practical, cost-effective, and compliant with applicable standards and project requirements.</li> <li>Review, coordinate, and approve engineering deliverables generated by discipline engineers.</li></ul><p><strong>Project Engineering &amp; Coordination</strong></p><br><ul> <li>Act as the focal point for all infrastructure FEED activities.</li> <li>Coordinate engineering activities across multiple disciplines and execution centers where applicable.</li> <li>Develop and manage engineering schedules, monitor progress, and drive timely delivery of FEED deliverables.</li> <li>Identify technical risks, constraints, and opportunities and develop mitigation plans.</li> <li>Support project execution planning and contribute to engineering strategies for project development.</li></ul><p><strong>Stakeholder Management</strong></p><br><ul> <li>Serve as the primary engineering interface with external stakeholders and contractors for infrastructure-related FEED activities.</li> <li>Lead technical meetings, workshops, design reviews, and coordination sessions.</li> <li>Present engineering solutions and recommendations to project management and clients.</li> <li>Manage technical queries and ensure timely resolution of issues.</li></ul><p><strong>Quality, HSE &amp; Assurance</strong></p><br><ul> <li>Ensure all FEED activities comply with company procedures, industry standards, and project specifications.</li> <li>Integrate Health, Safety, Environment, and Security (HSES) requirements into engineering designs.</li> <li>Support design assurance and quality reviews of all infrastructure deliverables.</li> <li>Ensure deliverables are issued accurately and within agreed schedules.</li></ul><p><strong>Change &amp; Risk Management</strong></p><br><ul> <li>Identify scope changes and assess their impact on cost, schedule, and technical requirements.</li> <li>Support implementation of approved changes through established management of change processes.</li> <li>Monitor engineering risks and ensure mitigation measures are incorporated into project planning.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Bachelor's Degree in Engineering (Civil, Mechanical, Infrastructure, or related discipline).</li> <li>PMP or Project Management qualification is an advantage.</li></ul><p><strong>Experience</strong></p><br><ul> <li>Minimum 10 years of engineering experience in oil &amp; gas, energy, industrial, or infrastructure projects.</li> <li>Demonstrated experience leading FEED studies for infrastructure facilities.</li> <li>Experience with logistics bases, fuel storage facilities, road networks, utilities, and site infrastructure.</li> <li>Proven track record coordinating multidisciplinary engineering teams.</li> <li>Experience interfacing directly with clients and stakeholders during FEED and project development phases.</li></ul><p><strong>Skills &amp; Competencies</strong></p><br><ul> <li>Strong project engineering and FEED management capabilities.</li> <li>Excellent multidisciplinary coordination skills.</li> <li>Thorough understanding of engineering standards, specifications, and design practices.</li> <li>Strong planning, scheduling, and organizational skills.</li> <li>Effective stakeholder and client management abilities.</li> <li>Commercial awareness and understanding of change management processes.</li> <li>Strong leadership, communication, and problem-solving skills.</li> <li>Ability to work independently and drive project objectives to completion.</li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Responsibilities: * Review project specifications, drawings, procedures, and identify project QA/QC requirements. * Develop Project Quality Plans (PQP), Method Statements (MS), Inspection and Test Plans (ITP), and obtain approvals from Client/Contractor. * Assist the Quality Manager in managing daily quality activities, preparing quality reports, and participating in quality meetings. * Monitor quality issues, raise Non-Conformance Reports (NCRs), recommend corrective actions, and ensure timely close-out of NCRs and CARs. * Liaise with Client, Consultant, Contractor, and Third-Party Inspectors for inspections, approvals, and quality documentation. * Supervise and monitor civil QA/QC activities and manage QA/QC inspectors assigned to civil works. * Conduct inspections for excavation, backfilling, foundations, concrete works, reinforcement, structural steel, masonry, finishing, and infrastructure works. * Prepare and maintain quality control records, inspection checklists, inspection matrices, and turnover dossiers in accordance with project specifications and international standards. * Review Material Test Certificates (MTCs) and ensure materials comply with approved specifications and standards. * Monitor document control activities and ensure proper distribution of approved documents. * Maintain and monitor calibration records of testing and measuring equipment. * Conduct internal quality audits for subcontractors, suppliers, and project departments. * Organize quality awareness and training programs for the workforce. * Prepare final quality dossiers, handover documentation, and project closeout records. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p> Qualification &amp; Experience: * Bachelor's Degree in Civil Engineering. * Minimum 8 years of experience as a Civil QA/QC Engineer in the Oil &amp; Gas, Building, or Infrastructure construction industry. * Strong leadership, communication, and coordination skills. Technical Requirements: * Thorough knowledge of civil construction activities, inspection procedures, and quality control methodologies. * Well conversant with international standards and capable of interpreting project specifications and codes accurately. * Extensive knowledge of ACI, ASTM, BS, ASHTO, ISO, and other relevant international standards. * Ability to read and interpret civil, structural, and architectural drawings and specifications. * Familiar with concrete works, earthworks, piling, foundations, structural steel, road works, and utility installations. * Good understanding of Oil &amp; Gas HSE requirements, construction practices, and quality standards. * Ability to coordinate effectively with Client, Contractor, Consultant, and Third-Party Inspectors for all QA/QC activities. * Experience in managing laboratory testing agencies, material testing subcontractors, and subcontractor quality activities.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Role Overview <p>We are seeking a highly motivated and skilled Navigation Engineer to contribute to the development of advanced autonomous navigation capabilities for Unmanned Ground Vehicles (UGVs). This role focuses on designing, implementing, and optimizing planning and control systems for autonomous operation across diverse environments, including off-road terrain, urban settings, and highway scenarios.</p><br><br> <p>The ideal candidate possesses strong expertise in control theory, motion planning, mathematical modeling, system identification, and optimization, combined with hands-on experience developing and validating autonomous navigation solutions in real-world applications. Experience with learning-based control techniques and intelligent decision-making frameworks is highly desirable.</p><br><br> Key Responsibilities <ul> <li>Design, develop, and optimize navigation, planning, and control algorithms for high-performance autonomous ground vehicles. </li><li>Develop accurate mathematical models of vehicle dynamics for simulation, analysis, and real-time implementation. </li><li>Implement advanced control strategies, including adaptive, robust, and predictive control methods, to ensure reliable operation in dynamic and uncertain environments. </li><li>Research, evaluate, and integrate learning-based approaches such as neural network-based system identification and reinforcement learning techniques. </li><li>Integrate navigation solutions with perception, localization, and vehicle software architectures to achieve seamless autonomous operation. </li><li>Conduct simulation, field testing, and performance validation of navigation and control systems. </li><li>Analyze experimental results and system performance to continuously improve accuracy, robustness, safety, and efficiency. </li><li>Develop and maintain technical documentation, including system designs, algorithms, performance analyses, and test reports. </li></ul> Required Qualifications <ul> <li>Master's or PhD degree in Robotics, Control Engineering, Electrical Engineering, Computer Science, Applied Mathematics, or a related discipline. </li><li>Strong theoretical and practical knowledge of motion planning, vehicle control, and autonomous navigation systems. </li><li>Expertise in classical and modern control methods, including control system design, analysis, and optimization. </li><li>Experience with mathematical modeling and system identification techniques. </li><li>Strong programming skills in C++. </li><li>Hands-on experience with ROS/ROS2 and navigation frameworks such as Nav2. </li><li>Strong analytical, problem-solving, troubleshooting, and debugging capabilities. </li><li>Excellent communication and technical writing skills, with the ability to work effectively in multidisciplinary engineering environments. </li></ul> Preferred Qualifications <ul> <li>Experience with optimization and control frameworks such as CasADi, ACADOS, or similar tools. </li><li>Knowledge of learning-based control methodologies and neural network-based system identification. </li><li>Experience applying reinforcement learning techniques to autonomous navigation and decision-making problems. </li><li>Familiarity with simulation environments and autonomous systems validation workflows. </li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Dubai serves as a strategic hub for Eaton’s Middle East operations, bringing together commercial, engineering, manufacturing, and support teams within a globally connected business environment. Building on more than 40 years in the region, Eaton recently announced the development of a new sustainable campus in Dubai, reinforcing our long‑term investment in growth, collaboration, and capability building.&nbsp;</span></p><br><br><br><p><span>As&nbsp;<strong>Test Engineer – PCBA</strong>, you set-up, validate, maintain and improve PCBA test procedure in production and ensure technical support in production for Failed PCBAs (or FGs) diagnosis after ICT/Flying probe/functional test, to secure EATON production quality standards and constantly improve customer satisfatction. This role ensures PCBA EATON quality compliance for repaired PCBA for New Product Introduction, Transfered PCBA from other EATON plants or EMS, and ensure robust and stable PCBA testing and repairing processes definition, compliant with industry standards, supporting product quality, and operational excellence, in line with EATON Safety rules.</span></p><br><br><br><p><span>The Test Engineer – PCBA will design PCBA/FG test procedure and Work Instructions in production, interacts with Manufacturing Test development team during design phases (manufacturability of PCBA &amp; FG), by supporting Industrialization Program Manager, trackz defect rate at FCT/ICT Test process steps during Pre-series and in production, via Pareto analysis, define, manage and realize Testers and Test fixtures maintenance activities, defines repair processs for failed PCBA/FG to be applied in production and suggests CI and VAVE projects for productivity improvement. </span></p><br><br><br>What you’ll do: <br><ul><li><span>Develop, deliver and maintain Operators and Maintenance work instruction and plan, for PCBA &amp; FG electronic test equipment processes (ICT, Flying Probe, Functional tests).</span></li><li><span>Manage and realize maintenance activities level 2 &amp; 3 (preventives maintenance and internal-external equipment calibrations).</span></li><li><span>Support Industrialization program manager in ProLaunch Manufacturing delivrables release: Process flow Chart, PFMEA, PPAP, etc.., with Manufacturing Test development engineering team.</span></li><li><span>Support Industrialization program manager to influence PCB/PCBA design through DFM reviews, with R&amp;D</span></li><li><span>Ensure PCBA test instruction and maintenance plan linked to ECO/MCO in due time.</span></li><li><span>Track and improve PCBA/FGs Test related cycle times for each PCBA SKU, and Update related RCCP data with production manager</span></li><li><span>Support customer audit and Plant quality certification programs at Test processes Level (ICT/Flying Probe Functional and other electronic test steps).</span></li><li><span>Support Manufacturing Test development team in new test solutions implementation in production: MSA tests, cycle time confirmation, maintenance plan definition, operator work instruction: change over and production operations, etc...</span></li><li><span>Support component &amp; Product engineer in SAP and MES setUp for PCBA/FGs test operation data establishment.</span></li><li><span>Analyse OEE of testers in production per SKU and define Continuous Improvement plan for Electronic Testing area.</span></li><li><span>Track maintenance indicators to improve Test area performance: MTBF, MTTR</span></li><li><span>Act as technical interlocutor for other EATON plant and EMS , for test in production shopfloor</span></li><li><span>Define CAPEX needs for PP, to improve productivity in production test area (ROI)</span></li><li><span>Support Production Continuous Improvement initiatives, SMED, Kaizen events, RIE, VSM</span></li><li><span>Act as production test process expert for quality crisis root cause analysis , and action plan definition.</span></li></ul><br>Qualifications: <br><ul><li><span>Bachelor’s Degree in Electronics/Mechanical/Industrial Engineering.</span></li><li><span>5+ years of experience in PCBA manufacturing test in production. Strong knowledge on PCBA manufacturing processes is a plus.</span><br></li></ul><br>Skills: <br><ul><li><span>Demonstrating in Lean Manufacturing or continuous improvement methodologies.</span></li><li><span>Production support and trouble shooting in test area&nbsp;</span></li><li><span>Significative experience in Test operation in production, including maintenance is required (Flying probe programing on Takaya, functional testing).</span></li><li><span>Expert in Test processes and equipments in production.</span></li><li><span>Electronic PCBA defect root cause analysis capability (CI tools application)</span></li><li><span>Solid understanding on PCBA manufacturing processes.</span></li><li><span>Programation of flying Probe equipment (i.e. Takaya flying Probe).</span></li><li><span>IPC-A610 Class3 strong knowledge and application (Certification is a strong advantage)</span></li><li><span>Knowledge of ESD safety procedures and quality control practices.</span></li><li><span>Maintenance plan creation and realization experience in test equipment.</span></li><li><span>Good communication with pedagogic skills and spirit of synthesis.</span></li><li><span>High attention to detail and documentation accuracy.</span></li><li><span>Ability to work with multiple plant stakeholders, R&amp;D engineers, and strongly support continuous improvement initiatives.</span></li><li><span>Safety oriented in operations, in line with EATON MESH and operational activities.</span></li></ul><br>What we offer you: <br><ul><li><span>Being part of a company that has been in business for more than 100 years, is well known in the industry, and has a major impact on the energy industry</span></li><li><span>Work in a company that is commitment to Inclusion &amp; Diversity and Sustainability</span></li><li><span>Annual mentoring program, Eaton University, a reward, and recognition system</span></li><li><span>Ongoing Learning and Career Development Opportunities in a global company. Build your career and apply internally for our open positions worldwide</span></li><li><span>Strong, agile and diverse team locally and globally</span></li><li><span>Strong processes and state-of-the-art systems and tools</span></li><li><span>Structured employee development processes, open feedback culture with development plans</span></li><li><span>Detailed induction support and well-structured onboarding</span></li><li><span>Balance your work and life with a hybrid worktime model</span></li></ul><br><p><span><strong>Living and Working in Dubai</strong></span></p><br><br><br><p><span>Dubai is an internationally connected city that offers strong professional opportunities within a truly global environment. Living and working in Dubai means being part of a diverse, forward‑looking business community, supported by modern infrastructure, excellent connectivity, and a well‑established expatriate ecosystem.</span></p><br><br><p><span>At Eaton, employees based in Dubai are part of a stable, well‑governed organization that brings together global teams, clear ways of working, and the flexibility needed to support both performance and long‑term career development.</span></p><br><br><p><span>#LI-NY1</span></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Join Our Team at Eaton: Empowering Tomorrow, Today! <br>&nbsp;<br>Dubai serves as a strategic hub for Eaton’s Middle East operations, bringing together commercial, engineering, manufacturing, and support teams within a globally connected business environment. Building on more than 40 years in the region, Eaton recently announced the development of a new sustainable campus in Dubai, reinforcing our long‑term investment in growth, collaboration, and capability building.<br>&nbsp;<br><strong>Eaton's Global Data Center Segment </strong>is focused on helping data centers realize real business benefits today while optimizing their operations for the future. With the rise of big data, edge computing and cloud, data centers are under pressure to be more high-performing, sustainable and cost-effective than ever, without compromising resilience or security. At the same time, new opportunities and revenue streams require faster speed-to-market. With our digital intelligence, world-class cyber-secure products and services, reliable, compatible solutions and engineering expertise, we help data centers realize real business benefits today while optimizing their operations for the future.<br><br><p>The <strong>Senior Advanced Systems Engineer</strong> is a strategic engineering role within Eaton’s Global Data Centre organisation, responsible for evaluating emerging technologies, developing future infrastructure and supporting the evolution of next-generation mission critical systems.&nbsp;</p><br><br><p>Working alongside Global Solutions Architects, Engineering and Product Management, the role applies engineering expertise, technology foresight to assess future trends, validate new concepts and influence Eaton’s long-term technical direction.&nbsp;</p><br><br><p>The role is primarily focused on future capability development rather than&nbsp;design&nbsp;delivery, while&nbsp;maintaining&nbsp;a strong engineering foundation through technical&nbsp;evaluation, validation&nbsp;and&nbsp;engineering studies.&nbsp;</p><br><br><br>What you’ll do: <br><br><p><strong>Future Technologies &amp; Innovation&nbsp;</strong></p><br><br><ul><li>Evaluate emerging technologies and future data centre architectures.&nbsp;</li><li>Research technology trends across AI infrastructure, power systems, cooling, digital infrastructure and grid integration.&nbsp;</li><li>Assess the technical readiness and engineering feasibility of future technologies.&nbsp;</li><li>Support proof-of-concept activities and innovation programmes.&nbsp;</li></ul><p><strong>Engineering &amp; Technical Validation&nbsp;</strong></p><br><br><ul><li>Apply engineering principles to validate future system concepts.&nbsp;</li><li>Develop engineering studies, technical assessments and technology evaluations.&nbsp;</li><li>Ensure future concepts remain technically robust, practical and deployable.&nbsp;</li><li>Support the transition of validated concepts into future engineering standards and methodologies.&nbsp;</li></ul><p><strong>Industry &amp; Technical Leadership&nbsp;</strong></p><br><br><ul><li>Support Global Solutions Architects through technical design, research and strategic analysis.&nbsp;</li><li>Engage with technology partners, consultants, standards bodies and industry forums.&nbsp;</li><li>Produce technical papers, white papers and future technology recommendations.&nbsp;</li><li>Share technical insight across Engineering, Product Management and Technology teams.&nbsp;</li></ul><br>Qualifications: <br><ul><li>Bachelor’s Degree in Electrical Engineering or related discipline; Master’s preferred.&nbsp;</li><li>Chartered Engineer (preferred).&nbsp;</li><li>Minimum 10 years’ experience in mission critical infrastructure, power systems or data centre engineering.</li></ul><br>Skills: <br><ul><li>Strong engineering compentency in electrical infrastructure, power distribution and integrated systems.&nbsp;</li><li>Demonstrated ability to evaluate emerging technologies using sound engineering judgement.&nbsp;</li><li>Excellent analytical, communication and technical writing skills.&nbsp;</li><li>Proven curiosity, innovation mindset and commitment to continuous learning.</li><li>Experience with Nvidia or AMD is highly appreciated</li><li>Proficiency in English</li></ul><p><span>#LI-SA2</span></p><br><br>What we offer: <br><ul><li>Competitive compensation and benefits, aligned with your experience and impact.</li><li>Opportunity to work on challenging, high‑impact projects within a dynamic and collaborative team environment.</li><li>Your aspirations matter – Eaton actively supports internal mobility and promotes from within whenever possible.</li><li>Your growth matters – We invest in long‑term development through continuous learning, upskilling, and global programs via Eaton University.</li><li>Your contributions matter – Reliability, safety, efficiency, and sustainability are at the heart of what we do, driving meaningful impact on people’s lives and the environment.</li><li>Your wellbeing matters – Health, safety, and wellness are a priority. At Eaton, wellbeing goes beyond programs, empowering employees with the tools and environment to thrive.</li></ul><br><p><span><strong>Living and Working in Dubai</strong></span></p><br><br><p><span>Dubai is an internationally connected city that offers strong professional opportunities within a truly global environment. Living and working in Dubai means being part of a diverse, forward‑looking business community, supported by modern infrastructure, excellent connectivity, and a well‑established expatriate ecosystem.</span></p><br><br><p>At Eaton, employees based in Dubai are part of a stable, well‑governed organization that brings together global teams, clear ways of working, and the flexibility needed to support both performance and long‑term career development.</p><br><br><p><span><em><br><strong>Ready to make a difference? Join Eaton’s Dubai Team and be part of a company shaping the future of sustainable manufacturing and power management!</strong></em></span></p><br><br><br><p><span>We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law.</span></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Lead Mechanical Engineer (Package Engineer - Static &amp; Rotating) to join its UAE Business Unit, based in Sharjah, UAE. This position will be seconded to the client and will support the delivery of key engineering projects.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><ul> <li>Lead the specification, design, and procurement of static and rotating equipment packages (e.g., compressors, pumps, valves, heat exchangers, flare packages, vessels, tanks, KODs, Drain pots).</li> <li>Ensure compliance with project requirements, industry standards (e.g., API, ASME), and client specifications.</li> <li>Supporting the Planning, scheduling and execution of discipline activities and deliverables, including manhour estimating and schedule preparation to support bid / tendering as required.</li> <li>Manage discipline work to the required schedule and manpower allocation, including requesting personnel as identified by the plan, and day-to-day supervision of discipline personnel on the project. This includes approval of timesheets, holiday approval and overtime approval where delegated.</li> <li>Manage and report progress of all Mechanical engineering and design budgets in line with contract requirements including weekly and cumulative productivity.</li> <li>To identify any areas of concern with respect to progress and / or quality and recommend corrective actions as required</li> <li>To attend weekly internal and external progress meetings and generate status reports for the Engineering / Project Manager</li> <li>To ensure all team members are competency assessed and maintain the competency of the team in line with company and Client requirements</li> <li>Define minimum acceptance criteria and Undertake pre qualification of third parties</li> <li>Liaise and engage with Licensors, Equipment Vendors and OEM’s as required to conclude the project deliverables in accordance with the project scope and provide third party budget costs for stage gate estimates as required.</li> <li>Define scope of work for 3rd Party sub contracts as required.</li> <li>Develop and review package specifications, data sheets, and technical bid evaluations.</li> <li>Select and design equipment to meet project requirements and optimize performance.</li> <li>Ensure equipment compatibility with existing infrastructure and systems.</li> <li>Collaborate with vendors to resolve technical issues</li> <li>Coordinate with the procurement team to ensure timely and cost-effective package delivery.</li> <li>Expedite vendor documentation, drawings, and delivery schedules.</li> <li>Ensure vendor compliance with project requirements and quality standards.</li> <li>Ensure seamless integration of equipment packages with overall project design.</li> <li>To co - ordinate with other disciplines during all stages of design development, construction, pre - commissioning, and start – up to ensure there is no conflict within the overall engineering design.</li> <li>To provide technical support to site in terms of material inspection, Factory Acceptance Testing etc</li> <li>To provide direction and guidance on technical queries relating to mechanical engineering and raise appropriate EQ’s / deviations</li> <li>To participate in all project safety and design reviews as necessary</li> <li>To ensure that all work is completed without compromise to quality and is delivered according to the project schedule</li> <li>To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion whilst ensuring that the project is concluded within the boundary of the technical scope.</li> <li>Take ownership for Risk Identification, Assessment, Mitigation, Monitoring and Close Out for your respective discipline.</li> <li>To promote safe behavior at all times</li> <li>To provide sound technical advice and solutions to a diversity of technical problems within the discipline</li> <li>Promote and encourage smarter ways of working and champion continuous improvement within your department</li> <li>Ensure all lessons learnt are captured and shared</li> <li>Ensure equipment design and selection meet safety and quality standards.</li> <li>Participate in HAZOP and other safety reviews.</li> <li>Implement quality control procedures for package engineering</li></ul><br>Qualifications:<br><ul> <li>Degree in Mechanical Engineering (B.Sc./B.Eng./M.Sc.)</li> <li>Membership of a recognized professional institute preferred</li> <li>Minimum of 15 years' experience in the oil and gas industry</li> <li>Minimum of 15 years proven capability in an engineering design company</li> <li>Expertise in static and rotating equipment, package specification, and procurement.</li> <li>Experience of working with multi-national and multi-cultural project teams is strongly preferred</li> <li>Previous experience of working in the Middle East would be an advantage</li></ul> </div>

<p>Senior Facility Engineer – Duties and Responsibilities (Air Base)</p><ol><li><p>Facility Operations & Maintenance</p></li></ol><p>Manage the day-to-day operation and maintenance of all air base facilities.</p><p>Ensure all MEP (Mechanical, Electrical, and Plumbing) systems are functioning efficiently.</p><p>Supervise preventive, corrective, and predictive maintenance activities.</p><p>Monitor critical systems such as HVAC, generators, UPS, transformers, air compressors, water systems, and fuel systems.</p><p>Ensure uninterrupted operation of mission-critical facilities.</p><ol><li><p>Team Management</p></li></ol><p>Lead and supervise Facility Engineers, Supervisors, Technicians, and subcontractors.</p><p>Allocate manpower according to operational priorities.</p><p>Conduct daily toolbox talks and safety briefings.</p><p>Evaluate staff performance and identify training requirements.</p><ol><li><p>Planned Preventive Maintenance (PPM)</p></li></ol><p>Develop and implement annual maintenance plans.</p><p>Ensure all PPM activities are completed as per schedule.</p><p>Review maintenance reports and verify work completion.</p><p>Minimize equipment downtime through effective maintenance planning.</p><ol><li><p>Corrective Maintenance</p></li></ol><p>Respond immediately to emergency maintenance requests.</p><p>Investigate equipment failures and identify root causes.</p><p>Coordinate repairs to minimize operational disruptions.</p><p>Ensure all maintenance activities comply with OEM recommendations.</p><ol><li><p>Health, Safety & Environment (HSE)</p></li></ol><p>Ensure compliance with HSE regulations and air base safety standards.</p><p>Conduct regular safety inspections and risk assessments.</p><p>Monitor Permit-to-Work (PTW) systems.</p><p>Participate in emergency response drills.</p><p>Ensure proper use of PPE by all personnel.</p><ol><li><p>Asset Management</p></li></ol><p>Maintain an accurate asset register.</p><p>Monitor equipment lifecycle and recommend replacement of obsolete assets.</p><p>Track warranty periods and service contracts.</p><p>Ensure calibration of testing equipment.</p><ol><li><p>Contract & Vendor Management</p></li></ol><p>Monitor subcontractor performance.</p><p>Review maintenance contracts and service agreements.</p><p>Verify completed work before approving invoices.</p><p>Coordinate with suppliers for spare parts and equipment.</p><ol><li><p>Budget & Cost Control</p></li></ol><p>Prepare maintenance budgets.</p><p>Monitor operational expenses.</p><p>Recommend cost-saving initiatives without compromising reliability.</p><p>Control spare parts inventory.</p><ol><li><p>Client Coordination</p></li></ol><p>Serve as the primary technical point of contact with the client.</p><p>Attend coordination meetings.</p><p>Provide technical advice and engineering solutions.</p><p>Ensure client complaints are resolved promptly.</p><ol><li><p>Reporting</p></li></ol><p>Prepare daily, weekly, and monthly maintenance reports.</p><p>Monitor KPIs and SLAs.</p><p>Submit incident and root cause analysis reports.</p><p>Maintain maintenance records and documentation.</p><ol><li><p>Compliance</p></li></ol><p>Ensure compliance with:</p><p>UAE Civil Defence requirements</p><p>Local authority regulations</p><p>Environmental regulations</p><p>OEM standards</p><p>Military/Air Base security procedures</p><p>ISO 9001, ISO 14001, and ISO 45001 requirements (where applicable)</p><ol><li><p>Engineering Support</p></li></ol><p>Review engineering drawings and technical specifications.</p><p>Evaluate modification requests.</p><p>Support new facility construction and renovation projects.</p><p>Conduct site inspections and technical assessments.</p><ol><li><p>Emergency Response</p></li></ol><p>Act as the engineering focal point during emergencies.</p><p>Coordinate restoration of critical services.</p><p>Ensure backup power systems remain operational.</p><p>Participate in business continuity planning.</p><ol><li><p>Documentation</p></li></ol><p>Maintain:</p><p>As-built drawings</p><p>O&M manuals</p><p>Equipment history records</p><p>Asset registers</p><p>Calibration certificates</p><p>Test reports</p><p>Inspection records</p><p>Key Performance Indicators (KPIs)</p><p>PPM completion 100%</p><p>Equipment availability 99.5%</p><p>SLA compliance 100%</p><p>Emergency response within contractual limits</p><p>Zero Lost Time Incidents (LTI)</p><p>High client satisfaction</p><p>Timely closure of corrective actions</p><p>Effective budget control and reduced maintenance costs</p><p>Typical Systems Under the Senior Facility Engineer</p><p>HVAC and Chillers</p><p>Split & Package AC Units</p><p>Electrical Distribution (HV/LV)</p><p>Generators and UPS</p><p>Lighting Systems</p><p>Fire Alarm & Fire Fighting Systems-Support only</p><p>Plumbing & Drainage</p><p>Water Storage & Pumping Systems</p><p>Building Management System (BMS)</p><p>Compressed Air Systems</p><p>Fuel Storage & Distribution</p><p>Hangars and Aircraft Support Facilities</p><p>Roads, Pavements, and External Infrastructure</p><p><strong>Desired Candidate Profile</strong></p><p>Nationality-Unrestricted Nationality</p><p>Expereience-10 years up </p><p>Age: 40 and above</p><p>Bachelor's degree in Engineering is a must</p>

Please read the job description carefully.⚠️ Do not apply if you do not meet the listed requirements.❗Eligibility: Only candidates currently residing in the UAE and having at least 10 years of relevant experience will be considered. Company Description<br>Established in 1988, GCC has earned a reputation for innovation, engineering excellence, and reliability across diverse sectors. Our portfolio features landmark projects in infrastructure, defense, industrial, commercial, leisure, and residential developments. Headquartered in Abu Dhabi, we have expanded across the MENA region, recognized for our quality-driven approach and dependable project delivery. Over the decades, GCC has helped shape the UAE's infrastructure, driving national growth and progress. From our first AED 3 million project to an annual turnover exceeding AED 1 billion. Our journey reflects our strong commitment to quality, sustainability, and innovation. Today, GCC stands among the region’s top contractors, delivering projects that define skylines and enrich communities. Role Description We are seeking a Senior Planning Engineer with a minimum of 10 years of UAE experience in infrastructure, roads projects. The selected candidate will be responsible for developing, monitoring, and controlling project schedules to ensure alignment with construction progress and contractual deadlines. The role includes supporting the Planning Manager in identifying potential delays, highlighting critical activities, and coordinating with consultants, subcontractors, and relevant authorities to ensure effective project execution and compliance with contractual and regulatory requirements. Key Responsibilities: Your tasks and responsibilities shall include, but are not limited to:Prepare and maintain project schedules including baseline schedules, recovery schedules, and impacted schedules. Monitor project progress and ensure alignment with the approved schedule. Prepare and review daily, weekly, bi-weekly, and monthly progress reports. Develop project dashboards and presentations for management and stakeholders. Prepare and review Extension of Time (EOT) claims. Support discussions on contractual and planning matters with consultants and clients. Prepare and review contractual correspondences related to project planning and delays. Identify schedule risks and propose mitigation measures. Qualifications: Education: Bachelor’s degree in Civil Engineering Minimum 10 years’ experience in infrastructure project planning and controls. Skills & Competencies: Strong scheduling and forecasting abilities using industry-standard tools Analytical mindset with effective problem-solving skills Good knowledge of contract terms (FIDIC, turnkey, reimbursable, etc.) Able to manage multiple interfaces and perform well under pressure Clear communicator with strong reporting skills to senior management and clients Work Location: Abu Dhabi Application Process: Interested candidates are invited to submit their resume and cover letter, highlighting relevant experience in project planning for infrastructure works, particularly roads and bridge projects. You may apply directly through Linked In or send your CV and cover letter to Careers@gcc.ae. Only shortlisted candidates will be contacted

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Overview</strong><br><p><span>KEO is a creative enterprise, where innovation is a way of life. We are uniquely resourced with end-to-end services to take clients from inspiration – through conceptualization – to realization of planning, design or project delivery in the built and natural environments. For over 60 years we’ve led with vision, contributing to many of the world’s most ambitious projects, iconic places, remarkable experiences and prosperous communities.</span></p><br><p><span>As a highly integrated and agile AEP/PMCM firm, KEO is recognized by ENR as one of the Top 225 International Design Firms and one of the Top 20 International PM/CM Firms. We are also ranked by World Architecture as the 51st&nbsp;largest global architecture firm and the #1 Firm in the Middle East Region in their 2024 WA100 Survey.</span></p><br><p><span>We invite you to join us. Why?</span></p><br><p><span>When you join KEO, you’ll discover more than just a job – you’ll find a supportive environment that fosters your professional development through internal global mobility and career development and does so within a culture that supports company-wide health and well-being through on-demand counselling services and regular workplace clinics. You will be invited to celebrate community events such as sports days, fun-runs, in-house sports teams and beach clean ups. In addition to your competitive package and benefits you will have access to a suite of policies that include hybrid working arrangements, individual athletic sponsorship, study assistance sponsorship, employee referral rewards.</span></p><br> <br><strong>Responsibilities</strong><br><p><span><span><span>Our newest opportunity is for a talented <strong>Resident Engineer</strong></span><span> to join our team</span>&nbsp;<span>based in RAK</span>, UAE.&nbsp;</span></span></p><br><p><span>We envisage success in this role to include; </span></p><br><ul><li><span>Manage and supervise all on-site infrastructure construction activities.</span></li><li><span>Lead the site supervision team, including inspectors and discipline engineers.</span></li><li><span>Monitor contractor performance and ensure compliance with project specifications, quality standards, health and safety requirements, and contract obligations.</span></li><li><span>Review and approve method statements, shop drawings, material submissions, and work inspections.</span></li><li><span>Coordinate with the client, contractor, authorities, and other project stakeholders.</span></li><li><span>Ensure timely resolution of technical issues and site-related challenges.</span></li><li><span>Monitor project progress and report on schedule, quality, and commercial matters.</span></li><li><span>Review contractor progress claims and variations where required.</span></li><li><span>Chair and attend site meetings and prepare progress reports.</span></li><li><span>Ensure all works comply with local authority regulations and project requirements.</span></li></ul> <br><strong>Qualifications</strong><br><p><span>To be successful in this dynamic opportunity, we envision that your career journey to date will include 15 years work experience&nbsp;partnered with a Bachelor degree in Civil Engineering.&nbsp;</span></p><br><ul><li><span>Bachelor's degree in Civil Engineering.</span></li><li><span>Minimum <strong>15 years</strong> of overall experience in infrastructure engineering and construction supervision.</span></li><li><span>At least <strong>5 years</strong> of experience as a Resident Engineer on major infrastructure projects in the UAE.</span></li><li><span>Proven experience delivering roads, utilities, drainage, sewerage, potable water, irrigation, and associated infrastructure works.</span></li><li><span>Strong knowledge of FIDIC contracts and construction supervision procedures.</span></li><li><span>Excellent leadership, communication, and stakeholder management skills.</span></li><li><span>Experience working with consultants on large-scale infrastructure developments.</span></li><li><span>UAE driving licence is preferred.</span></li></ul><p><span>KEO’s performance is founded upon integrity, results, innovation, safety and our people. We embrace diversity and recognise its’ contribution to client success wherever we work.</span></p><br><p><span>We are excited to hear how you can partner with our award-winning team and treat all expressions of interest confidentially.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>The Assistant Resident Engineer (ARE) – Overground Stations will support the Resident Engineer in overseeing the construction, testing, commissioning, and handover of elevated and at-grade metro station structures and associated architectural, civil, structural, MEP, and rail interface works. The role ensures that all works are executed in accordance with project specifications, approved drawings, contract requirements, quality standards, safety regulations, and client expectations.</p><br>Your role<p><b>Construction Supervision</b></p><br><ul><li>Assist the Resident Engineer in managing the supervision of overground metro station construction works.</li><li>Monitor contractor activities to ensure compliance with approved drawings, specifications, method statements, and project schedules.</li><li>Supervise station-related civil, structural, architectural, and MEP works during all phases of construction.</li><li>Review construction methodologies and ensure adherence to approved work procedures.</li><li>Coordinate site inspections and verify that works are completed according to contractual requirements.</li></ul><p><b>Quality Assurance &amp; Control</b></p><br><ul><li>Ensure implementation of project Quality Management Systems and inspection procedures.</li><li>Review and witness inspections, testing activities, and material approvals.</li><li>Monitor NCRs (Non-Conformance Reports), corrective actions, and close-out processes.</li><li>Verify compliance with applicable international standards, local regulations, and client requirements.</li></ul><p><b>Health, Safety &amp; Environment (HSE)</b></p><br><ul><li>Promote a strong safety culture across the project site.</li><li>Ensure compliance with project HSE plans, permit-to-work systems, and Dubai/UAE regulations.</li><li>Participate in site safety inspections, audits, and incident investigations.</li><li>Monitor contractor implementation of environmental and sustainability requirements.</li></ul><p><b>Interface &amp; Coordination</b></p><br><ul><li>Coordinate with multidisciplinary teams including civil, structural, architecture, MEP, systems, track, utilities, roads, and traffic specialists.</li><li>Support management of interfaces between station works and adjacent infrastructure packages.</li><li>Liaise with contractors, stakeholders, utility authorities, and client representatives to resolve site issues effectively.</li><li>Participate in technical and progress meetings.</li></ul><p><b>Contract Administration</b></p><br><ul><li>Assist in reviewing contractor submissions including shop drawings, method statements, RFIs, material submittals, and work inspection requests.</li><li>Support verification of completed works for progress measurements and payment applications.</li><li>Monitor variations, claims, and contractual compliance issues and provide recommendations to the Resident Engineer.</li></ul><p><b>Testing &amp; Commissioning</b></p><br><ul><li>Support testing and commissioning activities related to station systems and building services.</li><li>Verify readiness of station assets for integrated testing and operational handover.</li><li>Participate in snagging, de-snagging, and final acceptance inspections.</li></ul><p><b>Reporting</b></p><br><ul><li>Prepare and review daily, weekly, and monthly site progress reports.</li><li>Maintain records of inspections, technical issues, site instructions, and construction activities.</li><li>Highlight risks, delays, quality concerns, and mitigation measures to the Resident Engineer.</li></ul>About you<p><b>Education</b></p><br><ul><li>Bachelor's Degree in Civil Engineering, Structural Engineering, Construction Engineering, or a related discipline.</li><li>Professional Engineering certification is preferred.</li></ul><p><b>Experience</b></p><br><ul><li>Minimum 10-15 years of overall experience in construction supervision and project delivery.</li><li>At least 5 years of experience on metro, rail, transit, or major transportation infrastructure projects.</li><li>Proven experience supervising elevated or overground station construction works.</li><li>GCC/UAE experience is highly preferred.</li><li>Previous experience with PMC/Engineer/Consultant organizations is desirable.</li></ul><p><b>Technical Skills</b></p><br><ul><li>Strong knowledge of station structures, architectural finishes, and MEP integration.</li><li>Good understanding of rail project interfaces and operational requirements.</li><li>Knowledge of FIDIC contract conditions.</li><li>Familiarity with testing, commissioning, and handover processes.</li><li>Proficiency in Microsoft Office and project management software.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li><span>Tax-free salary.</span></li><li><span>Life insurance coverage.</span></li><li><span>Medical insurance.</span></li><li><span>Annual leave balance.</span></li><li><span>Company gratuity scheme.</span></li><li><span>Discretionary bonus program.</span></li><li><span>Annual flight contribution.</span></li><li><span>Transportation &amp; housing allowances.</span></li><li><span>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</span></li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Purpose</b> <br><p><span><span><span>Provide technical expertise on all relevant Flight Ops Performance Engineering aspects, including but not limited to aircraft performance, weight and balance, engine out procedures, aircraft documentation, aircraft modifications, operations planning and optimization, fuel conservation, operating cost optimization and aircraft evaluation and testing. This role is also the focal for Airbus performance tools, to strive to improve the performance &amp; efficiency of our operation.</span></span></span></p><br><br><b>Key Result Responsibilities</b> <br><p><b>Key activities:</b><br>1. Provide technical advice and assistance on all aspects of Aircraft Performance Engineering<br>2. Contribute to performance documentation technical content, customization, revision and production in relevant published manuals and support material<br>3. Ensure that regulated performance for Take-off, En-route and Landing are monitored and revised on a regular basis:<br>a) Takeoff<br>- Constant monitoring and updating of airport database<br>- Design, validation and implementation of Engine Out procedures<br>- NOTAM assessment and implementation configuration and maintenance of the electronic performance tool<br>b) En-route<br>- Validation as appropriate of escape procedures for Drift down and Depressurization<br>c) Landing<br>- Constant monitoring and updating of airport database<br>- Configuration and maintenance of the electronic performance tool<br>- Research and apply methods to increase weights from landing performance penalties<br>4. Monitors and analyzes the Flight Planning System database constantly to ensure its adequacy, accuracy and compliance with the Civil Aviation Authority rules and regulations, ICAO adopted procedures, as well as Airline's policies and procedures and Standard Operations Manual.<br>5. Monitors the NOTAMs performance &amp; implementation constantly; complies with all necessary regulatory publications such as AIP and Notams that may arise and affect the area of operation whilst ensuring the LIDO Flight Planning system is operating in accordance with regulatory and AIP requirements.<br>6. Identifies limitations on operational capabilities such as Notams, Navigation facilities, Air Traffic flow, aircraft performance and Mel requirements, in line with business requirements and in accordance with Company’s and civil aviation international regulatory guidelines and standards; suggests remedial solutions where applicable.<br>7. Ensures that non normal procedures, or dispatch under MEL items that affect aircraft performance are analyzed and proper guidance produced for crew and Dispatch.<br>8. Contribute to Weight and Balance aspects for our client, including but not limited to:<br>a) AHM560/565 data construction and validation<br>b) Load and Trim sheet production and validation<br>c) In Service modification and reweigh calculation and validation<br>9. Supports in Electronic Flight Bag System and troubleshooting issues and updates database as and when required. <br>10. Reviews Airfield Type A and B Obstacle Charts for analysis and conducts airport feasibility study.<br>11. Acts as Aircraft Performance Monitoring focal, to ensure that back office and aircraft systems accurately reflect aircraft performance degradation; calculates the performance data for all aircrafts and generates aircraft performance degradation. <br>12. Monitors the ETOPS constantly and generates reports as required.<br>13. Ensure each new route and new destination is assessed and evaluated for safe and efficient operation and conducts safety risk assessment and provides technical evaluation in terms feasibility. <br>14. Support all company’s new projects related to aircraft performance and operation efficiency<br> </p><br><br>Key Result Responsibilities - Continued <br><p><b>Data Maintenance:</b><br>1. Monitors the flight plans on daily basis to highlight any irregular matters related to data maintenance and coordinates with LIDO to implement corrective measures accordingly. <br>2. Acts proactively and supports the Flight Dispatch and Flight Crew by loading the flight plans into the Flight Planning System and by providing them with accurate and timely updates on flights changes.<br>3. Cooperates with Dispatch and Information Technology teams to handle and control all data affecting the Flight Planning System such as new versions, patches, outages, maintenance, etc.<br>4. Utilizes data, reports, and feedback from various sources to conduct analysis and monitor the operational performance of routes based on different criteria. Generates reports to management to highlight the performance of routes to assist them take decisions on commercial objectives.<br>5. Assists in identifying the company’s most cost-effective routes with focus on improving fuel consumption and over flying costs taking into account safety, regulatory compliance and customer comfort.<br>6. Employs all possible tools and channels, during disruptions and emergencies, to convey and maintain necessary safety related information and data to ensure safe conduct of the flights, and applies procedures prescribed in the Operations Manual whilst ensuring abidance by Civil Aviation Authority and Air Traffic Procedures. <br>7. Stays updated with changes to Company’s manuals, Aircraft Manufacturer’s publications, State’s or other regulatory bodies’ publications. </p><br><br><br><b>Qualifications (Academic, training, languages)</b> <br><p>- Bachelor’s degree in IT/Math/Aeronautical Engineering or equivalent from a recognized university is highly desirable for this role.<br>- A diploma in a related field is acceptable if combined with necessary working experience and a track of record.<br>- Must have completed “Performance Engineering” training from Airbus or other manufacturer.<br>- Deep understanding of the software development process and applicable PE tools – Performance Center and diagnostic tools.<br>- Broad performance engineering tool experience (Wily, Compuware, IBM-Filenet/Websphere Portal, dynaTrace, HP, etc.)<br>- Understanding of database technologies – SQL, Oracel, Exadata, etc.<br>- Microsoft Office (Advanced Excel), Internet, Web Search<br>- Good in written and verbal communication skills, Technical reports writing, presentations, etc.<br>- Fluent in English Language.</p><br><br><b>Work Experience</b> <br><p>• 5+ years of experience in a comparable airlines or aircraft manufacturer company in the operations/engineering department as an approved or licensed Engineer/ Flight Dispatcher; experience with low cost airline is preferred. <br>• Broad performance engineering experience (modelling, tuning, diagnostics, monitoring, etc.)<br>• Comprehensive knowledge in the regulations of the Civil Aviation Authorities and regulatory bodies, familiar with rules and regulations of local Civil Aviation Authority, ICAO, CAR, FAR, JAR, and IOSA pertaining to Flight Operations and working procedures.<br>• Exposure to QA/Safety/Security and practices related to and affecting Flight Operations.<br>• Capable of applying policies, procedures as per approved standards and regulations.<br>• Comfortable working in a matrix environment<br>• Capable to perform in a changing environment with heavy work-load schedules and ad-hoc scenarios.<br>• Proven skills in analysing data, identifying pitfalls and recommending alternatives.<br>• Performs with high accuracy and attention to details.<br>• Quick learner and self-starter who requires minimal supervision to excel in a dynamic environment</p><br><br><br> </div>

<p>Location :- Abu Dhabi</p><p>Brief about company :- Sigma Engineering Works (SEW) is qualified to engineer and fabricate a full range of products based on customer specification, raising the bar in safety standards and reliable delivery. Sigma Engineering Works is an engineering service company, offering fabrication, manufacturing, service & repair, and other services to the energy industry. The company prides itself on offering a diverse and comprehensive range of products and services for the oil and gas industry that meet the highest of QHSE standards. Its services fall under machine and fabrication, blasting, painting, welding and fitting.</p><p>Sigma Engineering Works (SEW) is part of Mazrui International - Diversified holding group with wide variety of businesses in Oil & Gas/Oilfield Services, Financial Investments, Real Estate, Construction, Retail, Trading, Distribution, Logistics, Transportation, Hospitality, Education etc.</p><br><p>Designation :- Design Engineer – ASME BPVC | Oil & Gas Fabrication & Manufacturing | Pressure Vessels, Heat Exchangers, Storage Tanks & Static Equipment Reporting to :- Engineering Manager Job Objective :- To support the growth of the organization through effective project management and control, contributing to the accurate and timely completion of contracts. Assist the project management team in the preliminary execution stage of projects and ensure competitive pricing of tenders to maximize sales and the growth of SEW <strong>Key Responsibilities & Authority :-</strong></p><ul><li><p>Develop detailed designs for pressure vessels, heat exchangers, columns, skids, and packages, ensuring compliance with ASME Section VIII Divisions 1 and 2. This includes defining materials, thickness, support structures, nozzles, and more.</p></li><li><p>Perform code calculations for stress analysis, material selection, and other critical design parameters, ensuring designs adhere to the ASME Boiler and Pressure Vessel Code (BPVC).</p></li><li><p>Prepare and review technical documents, drawings, and specifications in compliance with ASME and company standards.</p></li><li><p>Design, direct, and coordinate all project-related activities, including fabrication, assembly, inspection, and testing, while ensuring alignment with contractual obligations and profit margins.</p></li><li><p>Review contract/tender documentation with the Engineering Manager, ensuring comprehensive understanding, and lead the development of project plans.</p></li><li><p>Coordinate with internal departments and sub-contractors for engineering deliverables such as design calculations, project schedules, method statements, ITPs, WPS, PQRs, and other related documents.</p></li><li><p>Prepare Material Take-Off (MTO) and Technical Data Sheets (TDS) for projects.</p></li><li><p>Represent SEW in front of clients and third-party organizations, including during ASME audits.</p></li><li><p>Liaise with clients and third parties to ensure engineering deliverables meet specifications and obtain necessary approvals.</p></li><li><p>Proactively identify project bottlenecks and implement corrective actions to ensure progress.</p></li><li><p>Prepare and manage technical queries, discuss them with the estimation team, and clarify with the client when needed.</p></li><li><p>Oversee or assist in the inspection of pressure vessels, columns, heat exchangers, and other components, ensuring they meet ASME standards.</p></li><li><p>Ensure that non-destructive testing (NDT) methods such as radiographic, ultrasonic, and hydro testing are conducted as per project requirements.</p></li><li><p>Maintain detailed records of design calculations, inspections, and project tasks, ensuring all documentation is available for audits and future reference.</p></li><li><p>Utilize specialized design and analysis tools such as PV Elite, COMPRESS, AutoCAD, SolidWorks, ANSYS, and HTRI for engineering calculations, modeling, and project management.</p></li><li><p>Engage in research and development initiatives to improve designs, reduce costs, and enhance safety and efficiency.</p></li><li><p>Participate in continuous improvement efforts related to equipment design and ASME compliance.</p></li><li><p>Act as a PRC and represent SEW in front of ASME during audits.</p></li><li><p>Ensure full compliance with ASME and other related audits, addressing any non-compliance issues promptly.</p></li><li><p>Monitor the performance of the SEW construction/installation team and participate in post-project reviews to identify learning opportunities.</p></li><li><p>Assist with project estimation, tendering, and project planning during the tender stage.</p></li><li><p>Coordinate with clients and third parties for seamless execution of deliverables.</p></li></ul><br><p><strong>Specialized Knowledge :-</strong></p><ul><li><p>In-depth knowledge of ASME Section VIII Divisions 1 and 2 for the design, fabrication, and inspection of pressure vessels, heat exchangers, columns, and skids.</p></li><li><p>Familiarity with ASME Boiler and Pressure Vessel Code (BPVC) and its applications in industrial design projects.</p></li><li><p>Proficient in ANSI, ASTM, API, BS, TEMA, AWWA, NACE, SHELL, NEMA, and other relevant industry standards for mechanical design and fabrication.</p></li><li><p>Expertise in PV Elite, COMPRESS, AutoCAD, SolidWorks, and ANSYS for performing design, stress analysis, and creating 3D models of equipment.</p></li><li><p>Proficiency in HTRI for the thermal design of heat exchangers.</p></li><li><p>Knowledge of MS Project or other planning software for managing timelines and resources.</p></li><li><p>Understanding of various NDT methods such as radiographic, ultrasonic, hydro testing, and their application in pressure vessel and component inspections.</p></li><li><p>Strong understanding of material selection and the impact of stress, temperature, and environmental conditions on materials used in pressure vessels, heat exchangers, and piping systems.</p></li><li><p>Experience in the estimation and tendering process for pressure vessels, piping systems, and skids, including material take-offs (MTO), technical data sheets (TDS), and cost estimation.</p></li><li><p>Skilled in performing mechanical stress analysis for static and dynamic loads, calculating wall thickness, reinforcement, nozzle placements, and flange ratings as per ASME standards.</p></li></ul><br><p>Ability & Skills :-</p><ul><li><p>Ability to work within specific timeframes and deliver results while ensuring project timelines, budgets, and technical requirements are met. Supports the growth of the organization through effective management and control for timely contract completion.</p></li><li><p>Proficient in performing mechanical stress analysis and design calculations for pressure vessels, heat exchangers, and other equipment. Skilled in the use of specialized software such as PV Elite, COMPRESS, AutoCAD, SolidWorks, and ANSYS.</p></li><li><p>Strong accuracy and attention to detail in preparing designs, technical documents, and reports, ensuring compliance with ASME and industry standards.</p></li><li><p>Proactively identifies and resolves bottlenecks in project progress, ensuring smooth execution and alignment with client expectations.</p></li><li><p>A good communicator, able to work with all levels of the SEW team, external groups, clients, and third parties. Supports the tendering process by offering technical advice to promote business opportunities.</p></li><li><p>A flexible and proactive member of the engineering and project management teams, adaptable to dynamic environments such as busy workshops and on-site locations.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Experience :-</strong></p><ul><li><p>Minimum of 10 years of experience in <strong>designing pressure vessels, heat exchangers, and similar equipment under ASME codes.</strong></p></li><li><p>Proficient in <strong>PV Elite, COMPRESS, AutoCAD, SolidWorks, ANSYS, and MS Office.</strong></p></li></ul><br><p><strong>Academic Qualifications :-</strong> Bachelor’s degree in <strong>Engineering/Mechanical or Petroleum.</strong></p><br><p><strong>Accountabilities and Performance Measures :-</strong></p><ul><li><p>Timely completion of tenders and projects.</p></li><li><p>Compliance with ASME standards and project requirements.</p></li><li><p>Efficient staffing, material use, and budget adherence.</p></li><li><p>Positive client feedback and precision in technical documentation.</p></li><li><p>Successful project management, implementation of improvements, and resolution of performance issues.</p></li></ul><br><p><strong><em>Please apply by attaching your CV only if you have relevant experience and qualifications.</em></strong></p><p><strong><em>Due to high volume of applications, only shortlisted candidates will be contacted.</em></strong></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Archirodon, having earned its reputation as a reliable and respected international contractor for more than a half century in the Engineering, Procurement and Construction (EPC) market, continues to create value to its stakeholders by executing complex EPC projects worldwide, in recognition of its superior standards of performance.</strong></p><br><br>Job Description<br><p>We are constantly growing and are currently looking for four (4) experienced&nbsp;<strong>Project Controls Engineer&nbsp;</strong>to join a top qualified and knowledgeable team of Engineers in one of our newly awarded Oil &amp; Gas projects in UAE.</p><br><p>Would you like to be part of a dynamic EPC leader with global presence? We’d like to meet you.</p><br><p>Join our worldwide journey. Build on something that matters!</p><br><p><strong>What you will need to do:</strong></p><br><ul><li>Drafts project-specific Project Controls Procedures as per contract requirements.</li><li>Participates in preparing Project internal and external reports in the required format.</li><li>Initiates, coordinates and maintains Project List(s) of Deliverables including those for project procedures and plans, engineering, procurement, material submittals, method statements etc.</li><li>Puts together procurement packages including quantities take-off, contract specifications and technical requirements, delivery schedule etc.</li><li>Initiates and maintains Procurement Status Register.</li><li>Prepares and maintains Subcontractors Register.</li><li>Assists in drafting subcontract agreements and negotiating subcontract prices.</li><li>Assists in subcontracts administration and related correspondences, measurements, payment certification, closing final account etc.</li><li>Coordinates and maintains Engineering Deliverables Status Register.</li><li>Prepares a List of Project Materials along with the required quantities and maintains a continuous project materials reconciliation.</li><li>Ensures that project records and diaries are maintained including photos, list of daily activities, climate conditions, utilized &amp; idle resources, productivities, important events, verbal site instructions, etc.</li><li>Monitors the Contract Scope of Work and any Variations thereto.</li><li>Prepares and maintains Variations and Claims Registers.</li><li>Collects, maintains and groups contemporary records necessary for assessment and substantiation of Variations and Claims.</li><li>Prepares Variation and Claim submissions.</li><li>Collaborates with quantity surveyors in preparing and submitting monthly payment requests.</li><li>Assists in preparing budget and current estimates and monitor any variances.</li><li>Participates in establishing project cost centers and allocates costs accordingly.</li></ul><br>Qualifications<br><ul><li>University degree in Engineering.</li><li>5 years relevant experience in construction industry at similar level.</li><li>Experience in EPC Projects with ADNOC (or equivalent) is essential.</li><li>Capability to perform under stressful situations.</li><li>Cost estimation, cost control, planning, risk management and contractual knowledge.</li><li>Engineering, procurement, construction, pre-commissioning and commissioning awareness.</li><li>Fluency in the English language.</li><li>Knowledge of project management tools.</li><li>Knowledge of basic financial concepts.</li></ul><br>Additional Information<br><p><strong>You are someone who:</strong></p><br><ul><li>Good communication and interface with Project Team</li><li>Operational mindset</li><li>Has excellent organizational skills</li><li>Is passionate about his/her field of expertise and determined to succeed&nbsp;</li></ul><p><strong>What's&nbsp;in it for you:&nbsp;</strong></p><br><p>Expat package is on the shelf, yet the real joy comes from being a member of smart and passionate teams, within an international leading EPC Group on a mission that matters. We create mega construction projects - literally around the globe - with meaningful impact on the local communities for the years to come. At Archirodon, you will find&nbsp; a proud, productive and human-centric culture, caring for and building on our people and their development!</p><br><p><em>Please note that you will be contacted only in case you are shortlisted for an interview. In the meantime, do not hesitate to stay in touch and keep monitoring&nbsp;our </em><em>open vacancies</em><em> and our </em><em>LinkedIn</em><em>&nbsp;page!&nbsp; Rest assured that your application will be treated with strict confidentiality and under all applicable data privacy regulations.</em></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Description: Civil Site Engineer – Substation Projects (UAE)</strong> ???</p><br><p><strong>Position Title:</strong> Civil Site Engineer<br><strong>Project Type:</strong> Electrical Substation Projects (132kV / 220kV / 400kV and Distribution Substations)<br><strong>Location:</strong> United Arab Emirates (Abu Dhabi, Dubai, Northern Emirates)<br><strong>Reporting To:</strong> Project Manager / Senior Civil Engineer / Construction Manager</p><br>1. Job Purpose ?<p>The Civil Site Engineer for substation projects is responsible for planning, supervising, and executing civil construction activities at electrical substations in compliance with project specifications, authority requirements, safety standards, and quality procedures. The role ensures that all civil works such as foundations, cable trenches, control buildings, equipment plinths, boundary walls, roads, and drainage systems are executed efficiently, safely, and within schedule.</p><br><p>The Civil Site Engineer acts as the key interface between the design team, subcontractors, consultants, and project management to ensure smooth project execution. The position requires strong coordination skills, technical knowledge of substation civil works, and familiarity with UAE authority standards such as ADDC, AADC, DEWA, SEWA, FEWA/EtihadWE, and TRANSCO.</p><br>2. Key Responsibilities ??A. Site Execution &amp; Supervision<ul><li>Supervise day-to-day civil construction activities at substation sites.</li><li>Ensure works are carried out as per approved drawings, method statements, and project specifications.</li><li>Coordinate with subcontractors for execution of foundations, cable trenches, transformer bunds, GIS buildings, control rooms, and internal roads.</li><li>Monitor excavation, backfilling, compaction, and concrete works.</li><li>Ensure proper levels and alignment for equipment foundations.</li><li>Supervise installation of underground utilities and drainage systems.</li><li>Verify rebar placement, formwork, embedment installation, and concrete pouring.</li><li>Check compliance with approved ITPs (Inspection and Test Plans).</li><li>Ensure proper curing and protection of concrete structures.</li></ul>B. Planning &amp; Scheduling ?<ul><li>Prepare weekly and daily work plans in coordination with the construction manager.</li><li>Monitor progress against project schedule and highlight delays.</li><li>Coordinate with procurement team for material delivery.</li><li>Ensure manpower and equipment availability for planned activities.</li><li>Assist in preparation of look-ahead schedules.</li><li>Support recovery plans in case of project delays.</li></ul>C. Coordination with Stakeholders ?<ul><li>Liaise with consultants for inspections and approvals.</li><li>Coordinate with electrical and mechanical teams for interface works.</li><li>Communicate with surveyors for setting out works.</li><li>Attend site coordination meetings with contractors and clients.</li><li>Resolve site technical issues in consultation with design team.</li><li>Coordinate with QA/QC engineers for inspections.</li></ul>D. Quality Control &amp; Assurance ?<ul><li>Ensure all materials comply with approved submittals.</li><li>Conduct site checks before consultant inspections.</li><li>Monitor concrete cube testing and compaction tests.</li><li>Ensure compliance with authority standards (ADDC, DEWA, etc.).</li><li>Maintain site quality records.</li><li>Ensure corrective actions for non-conformance reports (NCRs).</li><li>Follow approved method statements.</li></ul>E. Health, Safety &amp; Environment (HSE) ?<ul><li>Enforce safety procedures at site.</li><li>Conduct daily toolbox talks with workforce.</li><li>Ensure use of PPE by all workers.</li><li>Monitor safe excavation practices.</li><li>Ensure barricading of open trenches and pits.</li><li>Coordinate lifting operations for heavy equipment foundations.</li><li>Report incidents and near misses.</li><li>Ensure compliance with UAE HSE regulations.</li></ul>F. Survey &amp; Setting Out ?<ul><li>Verify benchmarks and reference points.</li><li>Coordinate with surveyor for layout of buildings and foundations.</li><li>Check finished levels of cable trenches and roads.</li><li>Ensure proper slope for drainage systems.</li><li>Verify as-built coordinates.</li></ul>G. Documentation &amp; Reporting ?<ul><li>Prepare daily progress reports.</li><li>Maintain site diaries.</li><li>Record manpower and equipment deployment.</li><li>Prepare inspection requests (IRs).</li><li>Track material delivery and usage.</li><li>Maintain drawing register.</li><li>Prepare red-mark drawings for as-built documentation.</li><li>Assist in preparation of monthly progress reports.</li></ul>3. Scope of Civil Works in Substation Projects ?<p>The Civil Site Engineer will typically handle the following works:</p><br><ul><li>Substation control building construction</li><li>GIS building civil works</li><li>Transformer foundations</li><li>Reactor foundations</li><li>Equipment plinths</li><li>Cable trenches and troughs</li><li>Cable basement works</li><li>Oil containment bunds</li><li>Boundary wall and fencing</li><li>Internal asphalt/concrete roads</li><li>Stormwater drainage systems</li><li>Earthing pits and chambers</li><li>Water tanks and pump rooms</li><li>Security buildings</li><li>Equipment gantry foundations</li><li>Firefighting water reservoir structures</li><li>Duct banks and underground sleeves</li></ul>4. Technical Requirements ?<ul><li>Good understanding of substation layout drawings.</li><li>Knowledge of reinforced concrete structures.</li><li>Experience in heavy equipment foundations.</li><li>Understanding of soil conditions and ground improvement.</li><li>Familiarity with cable trench construction.</li><li>Knowledge of concrete mix design and testing.</li><li>Ability to read IFC drawings and shop drawings.</li><li>Understanding of UAE construction standards.</li><li>Experience with excavation and shoring systems.</li><li>Knowledge of waterproofing and joint sealing.</li></ul>5. Qualification Requirements ?<ul><li>Bachelor’s Degree in Civil Engineering.</li><li>Minimum 4–8 years of experience in civil construction.</li><li>At least 2–3 years in substation projects in UAE.</li><li>Experience in high voltage substations preferred.</li><li>Knowledge of authority standards (DEWA/ADDC/TRANSCO).</li><li>UAE driving license preferred.</li></ul>6. Skills &amp; Competencies ?<ul><li>Strong technical knowledge of civil works.</li><li>Good communication skills.</li><li>Ability to coordinate multiple teams.</li><li>Problem-solving capability.</li><li>Planning and organizational skills.</li><li>Leadership abilities.</li><li>Time management skills.</li><li>Attention to detail.</li><li>Ability to work under pressure.</li><li>Familiarity with AutoCAD drawings.</li></ul>7. Software Knowledge ?<ul><li>AutoCAD (basic review)</li><li>MS Excel</li><li>MS Project / Primavera (basic)</li><li>MS Word</li><li>Inspection management systems</li><li>ERP systems (preferred)</li></ul>8. Key Performance Indicators (KPIs) ?<ul><li>Progress vs schedule achievement</li><li>Quality compliance rate</li><li>Number of NCRs</li><li>Safety compliance</li><li>Productivity of subcontractors</li><li>Material wastage control</li><li>Inspection approval rate</li><li>Project milestone achievement</li></ul>9. Working Conditions ?<ul><li>Site-based role in outdoor environment.</li><li>Work in high temperature conditions typical in UAE.</li><li>Coordination with multiple subcontractors.</li><li>Occasional extended working hours to meet deadlines.</li><li>Travel between multiple substation sites may be required.</li></ul>10. Responsibilities During Project Phases ?Mobilization Phase<ul><li>Review drawings and specifications.</li><li>Participate in site handover.</li><li>Coordinate site setup.</li><li>Verify benchmarks.</li></ul>Construction Phase<ul><li>Supervise all civil works.</li><li>Coordinate inspections.</li><li>Monitor progress.</li><li>Ensure quality compliance.</li></ul>Testing &amp; Commissioning Phase<ul><li>Support electrical team.</li><li>Complete finishing works.</li><li>Clear punch list items.</li><li>Assist in handover documentation.</li></ul>Project Close-Out<ul><li>Prepare as-built drawings.</li><li>Close NCRs.</li><li>Finalize documentation.</li><li>Assist in project handover.</li></ul>11. Preferred Experience in UAE Substation Authorities ?<p>Experience in projects under:</p><br><ul><li>TRANSCO</li><li>ADDC / AADC</li><li>DEWA</li><li>SEWA</li><li>EtihadWE (FEWA)</li><li>ADNOC substations</li></ul>12. Reporting Structure ?<p>Civil Site Engineer reports to:</p><br><ul><li>Construction Manager</li><li>Project Manager</li><li>Senior Civil Engineer</li></ul><p>Coordinates with:</p><br><ul><li>Electrical Engineers</li><li>QA/QC Engineers</li><li>HSE Engineers</li><li>Surveyors</li><li></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>We are seeking an experienced Structural Engineer to join our Construction Supervision team, overseeing the delivery of villa developments and residential communities. The successful candidate will be responsible for ensuring all structural works are executed in accordance with the contract documents, approved drawings, project specifications, applicable codes, and quality standards.</p><br><p>Working closely with the Resident Engineer and multidisciplinary site team, the Structural Engineer will monitor construction activities, review contractor submissions, inspect structural works, and ensure safe, compliant, and high-quality project delivery from foundation works through to handover.</p><br><p><strong>Responsibilities:</strong></p><br><ul><li>Supervise all structural construction activities for villa developments, ensuring compliance with approved drawings, specifications, contract requirements, and applicable local authority regulations.</li><li>Conduct regular site inspections of excavation, foundations, reinforced concrete, structural steel (where applicable), retaining walls, and other structural elements.</li><li>Review and provide technical comments on shop drawings, reinforcement detailing, material submittals, method statements, and Requests for Information.</li><li>Verify reinforcement installation, concrete placement, formwork, post-tensioning (where applicable), and structural connections prior to construction activities.</li><li>Witness inspections and testing of structural materials including concrete, reinforcement steel, grout, and other structural components.</li><li>Monitor contractor workmanship and ensure compliance with project quality plans, Inspection and Test Plans, and health and safety requirements.</li><li>Identify construction issues and coordinate with architects, MEP engineers, geotechnical specialists, contractors, and other stakeholders to resolve technical and interface challenges.</li><li>Prepare site inspection reports, non-conformance reports, site instructions, and monitor timely close-out of corrective actions.</li><li>Review progress against the project and highlight potential risks or delays affecting structural works.</li><li>Verify completed structural works for interim payment applications and provide recommendations to the Resident Engineer.</li><li>Participate in coordination meetings, progress reviews, technical workshops, and client meetings as required.</li></ul><br>Qualifications<br><ul><li>Bachelor's Degree in Civil or Structural Engineering.</li><li>Minimum 7–12 years of professional experience, with at least 5 years in construction supervision of villa developments, residential communities, or low-rise building projects.</li><li>UAE or GCC construction supervision experience is highly preferred.</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Black &amp; Grey HR is seeking a Project Engineer – Offshore &amp; Subsea to join our client's offshore project delivery team based in Abu Dhabi, UAE. This is a permanent office-based role with offshore and field travel as required throughout the project cycle, supporting the engineering delivery of offshore survey, subsea, and marine projects from execution planning through to project close-out.<br></p><br><p>You will be responsible for providing technical engineering support across multiple projects, ensuring engineering deliverables, technical documentation, project coordination, and offshore readiness are delivered in accordance with client requirements, industry standards, and project schedules. Working closely with the Project Manager, discipline engineers, offshore personnel, procurement, vendors, and subcontractors, you will help ensure projects are executed safely, efficiently, and to the highest technical standards.<br></p><br><span>Key Responsibilities</span><br>- Develop, review, and maintain project engineering documentation including technical specifications, engineering calculations, method statements, work packs, and project procedures.<br><br>- Support the preparation and maintenance of project execution plans, engineering schedules, deliverable registers, technical trackers, and project documentation throughout the project lifecycle.<br><br>- Coordinate engineering activities with internal discipline engineers, offshore teams, subcontractors, vendors, and clients to ensure timely delivery of engineering outputs and resolution of technical queries.<br><br>- Review engineering deliverables to ensure compliance with project specifications, client requirements, company standards, and applicable industry codes.<br><br>- Manage engineering change control, Requests for Information (RFIs), technical queries, and deviation registers while ensuring accurate documentation and timely approvals.<br><br>- Assist with material take-offs, procurement support, technical bid evaluations, vendor document reviews, and equipment selection to meet project requirements.<br><br>- Support offshore campaign planning by participating in pre-mobilisation engineering reviews, vessel readiness assessments, equipment verification, and technical risk mitigation activities.<br><br>- Prepare engineering progress reports, technical presentations, and project updates for internal management meetings and client progress reviews.<br><br>- Monitor engineering deliverables, identify technical risks and interface issues, and recommend practical solutions to maintain project schedules and quality objectives.<br><br>- Maintain engineering records, project documentation, and lessons-learned registers while contributing to continuous improvement initiatives and engineering best practices.<br><br><br><span>Requirements- Bachelor's Degree in Mechanical, Structural, Civil, Marine, Subsea, or a related Engineering discipline.<br><br>- 4–8 years of project engineering experience within offshore, subsea, marine, or offshore survey environments.<br><br>- Strong understanding of offshore engineering principles, subsea systems, marine operations, and offshore installation methodologies.<br><br>- Experience preparing engineering documentation, technical specifications, work packs, method statements, and engineering deliverables.<br><br>- Knowledge of engineering change management, RFI processes, technical deviations, procurement support, and vendor document reviews.<br><br>- Experience coordinating multidisciplinary engineering teams, offshore personnel, vendors, and subcontractors throughout project execution.<br><br>- Strong planning, technical coordination, analytical, and problem-solving skills with the ability to manage multiple engineering priorities.<br><br>- Excellent communication, stakeholder management, and technical reporting skills.<br><br>- Proficiency in Microsoft Office and engineering documentation management systems.<br><br>- Experience supporting ADNOC or other regional offshore energy projects is highly desirable.<br><br><span>CERTIFICATIONS (Please attach below certificates)</span><br>- BOSIET or HUET — must be valid and current. Candidates with an expired BOSIET/HUET will not be shortlisted. Please attach a copy of your certificate with your application.<br><br>- ADNOC Facility Access Approval — held or a clearly documented ability to obtain. Candidates who have previously held ADNOC access or worked on ADNOC-approved projects are at a significant advantage.<br><br>- Relevant engineering or discipline-specific certifications are advantageous.<br><br>- Knowledge of IMCA guidelines and offshore engineering best practices is advantageous.<br><br></span><br><span>Benefits- Attractive Salary + Benefits<br><br>- Permanent employment with a leading offshore survey and subsea engineering organization<br><br>- Opportunity to support major offshore survey, hydrographic, and subsea projects across the UAE and the wider region<br><br>- Exposure to advanced offshore survey technologies, equipment management, mobilisation planning, and asset lifecycle processes<br><br>- Opportunity to develop expertise in survey systems, calibration, maintenance, and offshore project support within a multidisciplinary environment<br><br>- Long-term career growth and progression within a stable organization delivering complex offshore survey and subsea operations<br><br><span>HOW TO APPLY</span><br>- Submit your CV along with a copies of your relevant certificates.<br><br></span><p>Shortlisted candidates will be contacted within 5 working days of application.<br></p><br>BG Marine | Black &amp; Grey HR<br><br>The Offshore &amp; Subsea Specialist Desk<br><br>Fast. Precise. Confidential. Human.<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Black &amp; Grey HR is seeking an Operations Engineer – Offshore &amp; Subsea to join our client's offshore operations team based in Abu Dhabi, UAE. This is a permanent office-based role with regular offshore and field travel during project campaigns, supporting the planning, coordination, and technical execution of offshore survey and subsea operations.<br></p><br><p>You will be responsible for bridging engineering and offshore operations, ensuring operational readiness, technical compliance, and efficient execution of offshore campaigns. Working closely with project managers, vessel teams, offshore personnel, logistics, and clients, you will support the successful delivery of survey, subsea, and marine operations while driving continuous improvement across operational processes and standards.<br></p><br><span>Key Responsibilities:</span><br>- Support the planning and coordination of offshore campaigns by developing resource plans, equipment readiness schedules, vessel requirements, and operational timelines to ensure successful project execution.<br><br>- Develop, review, and maintain operational procedures, method statements, risk assessments, lift plans, and safe systems of work in accordance with company, client, and regulatory requirements.<br><br>- Coordinate with project engineers, vessel management, offshore personnel, logistics teams, and subcontractors to ensure the timely deployment of equipment, personnel, and project resources.<br><br>- Monitor offshore operational performance throughout project execution, identifying technical issues, operational risks, schedule deviations, and resource constraints while supporting timely corrective actions.<br><br>- Prepare and coordinate pre-mobilization documentation, including mobilization checklists, Permit to Work (PTW) documentation, toolbox talks, SIMOPS planning, and operational readiness packages.<br><br>- Act as a key interface with clients during offshore campaigns, supporting operational planning meetings, daily progress reporting, technical discussions, approvals, and execution updates.<br><br>- Monitor operational KPIs, analyse project performance data, and contribute to lessons learned, after-action reviews, and continuous improvement initiatives across offshore operations.<br><br>- Participate in operational readiness reviews, Management of Change (MoC) processes, and pre-campaign planning activities to ensure all technical, operational, and safety requirements are achieved prior to offshore execution.<br><br>- Support the development, implementation, and continuous improvement of operational management systems, procedures, standards, and best practices across survey and subsea operations.<br><br>- Promote compliance with company HSE policies, client requirements, industry regulations, and international offshore standards while fostering a strong operational safety culture.<br><br><br><span>Requirements-&nbsp;Bachelor's Degree in Marine Engineering, Mechanical Engineering, Subsea Engineering, Ocean Engineering, or a related engineering discipline.<br><br>- 5–9 years of experience in offshore operations, marine operations engineering, subsea projects, or offshore survey operations.<br><br>- Strong understanding of offshore operational planning, vessel operations, project execution, risk management, and HSE requirements.<br><br>- Experience supporting offshore mobilizations, operational readiness reviews, SIMOPS, Permit to Work systems, and Management of Change (MoC) processes.<br><br>- Knowledge of offshore survey, subsea construction, IRM, or marine support operations is highly desirable.<br><br>- Excellent coordination, stakeholder management, technical reporting, and problem-solving skills.<br><br>- Ability to work effectively with multidisciplinary project teams in dynamic offshore environments.<br><br>- Proficiency in Microsoft Office and operational reporting or project management systems is preferred.<br><br><span>Certifications (Please attach the below certificates)</span><br>- Valid BOSIET or HUET certification.<br><br>- ADNOC operational access approval, or the ability to obtain it, is highly advantageous.<br><br>- DP Awareness or DP Operator certification is advantageous.<br><br>- Knowledge of IMCA guidelines and offshore industry best practices is preferred.<br><br></span><br><span>Benefits- Attractive Salary + benefits<br><br>- Permanent employment with a leading offshore and subsea engineering organization<br><br>- Opportunity to support major offshore survey, subsea, and marine operations for ADNOC and regional energy projects<br><br>- Exposure to multidisciplinary offshore operations, including vessel campaigns, mobilizations, SIMOPS, and operational readiness planning<br><br>- Opportunity to develop expertise in offshore operations engineering, subsea project execution, and marine operational management<br><br>- Long-term career growth and progression within a stable organization delivering complex offshore and subsea projects<br><br><span>HOW TO APPLY</span><br>- Submit your CV along with copies of your relevant certifications.<br><br>Shortlisted candidates will be contacted within 5 working days of application<br><br>BG Marine | Black &amp; Grey HR<br><br>The Offshore &amp; Subsea Specialist Desk<br><br>Fast. Precise. Confidential. Human.<br><br></span><br> </div>

Technical Engineer - Snr (MEP) – UAEAre you an experienced MEP Technical Engineer with the expertise to manage complex technical deliverables, coordinate multidisciplinary interfaces, and resolve engineering challenges across major construction projects?<br>ALEMCO is looking for a Senior Technical Engineer (MEP) who can provide advanced technical support, ensure the accuracy and quality of engineering outputs, and bridge the gap between design requirements and practical site execution.<br>Who We are? ALEC Holdings PJSC, part of the Investment Corporation of Dubai (ICD), is a leading GCC construction group with over two decades of success delivering some of the region’s most complex and high-profile projects. As a proudly publicly listed company, ALEC continues to raise the bar for quality, innovation, and excellence in construction, driving iconic developments that shape skylines across the Middle East.<br>In the UAE, ALEC has delivered many of the nation’s most iconic developments, operating as a fully integrated contractor through specialist business units that provide end-to-end construction solutions.<br>ALEMCO provides integrated MEP and facilities services that power some of the region’s most ambitious developments. From electrical systems to long-term maintenance, we focus on technical reliability and sustainable performance - supported by an inclusive and skilled team with a passion for engineering excellence.<br>Why Join Us? As a Senior Technical Engineer (MEP) at ALEMCO, you will play a key role in delivering complex technical activities and ensuring that engineering outputs are accurate, practical, and aligned with project and business requirements.<br>You will work within a technically driven environment that values engineering precision, effective coordination, quality, continuous improvement, and professional development. Your expertise will directly contribute to the safe and successful delivery of complex MEP projects.<br>Your Role Reporting to the Technical Manager, you will provide advanced technical expertise within your assigned area of responsibility. You will review and coordinate engineering deliverables, resolve complex technical issues, support quality and inspection activities, and guide technical personnel to ensure effective project delivery.<br>You may also oversee technical teams and processes, supporting team development and ensuring that project objectives are achieved.<br>Key Responsibilities Engineering & Technical Coordination Review MEP drawings, specifications, BOQs, and ensure technical compliance Coordinate with consultants and subcontractors for drawing approvals Prepare and review technical submittals, material approvals, and compliance matrices Support method statement preparation and technical documentation Design & Site Interface Assist in resolving technical clashes and interface issues Support BIM coordination and interdisciplinary alignment Conduct site inspections to ensure installation aligns with approved drawings Monitor technical deviations and implement corrective actions Procurement & Material Support Provide technical evaluation of vendors and materials Support procurement team with technical clarifications Ensure long-lead items are technically aligned with project requirements Testing, Commissioning & Handover Support pre-commissioning and commissioning activities Ensure systems comply with performance specifications Assist in preparation of as-built documentation and O&M manuals Reporting & Documentation Maintain technical logs, trackers, and engineering registers Prepare technical reports and progress updates Support client meetings with engineering presentations where required<br>What We’re Looking For Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or another relevant engineering discipline. Minimum seven years of relevant MEP engineering experience. Advanced technical knowledge of MEP systems and their integration within complex construction projects. Strong experience in reviewing drawings, specifications, technical submittals, material submissions, and compliance documentation. Proven ability to investigate and resolve complex technical and coordination issues. Strong understanding of construction sequencing, site execution, quality requirements, and multidisciplinary coordination. Experience coordinating with consultants, subcontractors, suppliers, and project-delivery teams. Ability to guide engineers and technical personnel and oversee assigned processes or deliverables. Proficiency in Microsoft Word, Excel, and Power Point. Excellent written and verbal communication skills. Strong problem-solving, review, assessment, and stakeholder-coordination capabilities. Ability to work effectively within fast-track and technically demanding project environments. Highly Preferred Experience with Auto CAD, Revit, Navisworks, or other relevant engineering and BIM tools. Experience in data centres, infrastructure, or large-scale commercial projects. Middle East construction experience. Exposure to testing, commissioning, and project handover processes. Experience working on consultant-driven projects. Experience in technical planning, risk assessment, documentation, and reporting. Previous experience supervising or guiding engineers and technical teams.<br><br>What We Offer The chance to contribute to some of the UAE's most iconic projects. A collaborative, supportive environment that values innovation and excellence. Opportunities for professional growth and career progression.<br>Ready to plan the path to project success? If you have the advanced MEP expertise to manage complex technical deliverables, resolve engineering challenges, and ensure quality from design coordination through to project handover, we want to hear from you.<br>Apply today and be part of something excellent! Please note we encourage you to apply as soon as possible, as this advert may close once we’ve found the right candidate. Although we can’t respond to every application, we want to thank you for taking the time to apply and for considering a future with us.