Electrical Engineering Jobs in UAE

Job Purpose<br><br>The successful candidate will support the line manager in defining, developing, implementing, maintaining, and monitoring policies, procedures, manuals, and best practices across Engineering and/or Maintenance systems throughout the network. The role ensures alignment with business requirements while maintaining full compliance with airline standards and procedures.<br><br>The position contributes to the continuous improvement of planning and maintenance processes, supporting operational efficiency, consistency, and regulatory compliance across all applicable functions.<br><br>Key Result Responsibilities<br><br>Provides weekly and monthly reports for management team for the workload analysis and Ground Time utilization effectives. Leads the planning and scheduling of all short term maintenance activities, including daily, weekly, and monthly maintenance work packages up to A Checks. Prepares and reviews short term maintenance forecasts, manpower requirements, and resource availability. Ensure rolling on weekly plan is coordinated with MCC, OCC and publishes the plan on daily basis to the concerned stakeholders. Provides solutions towards cost control / reductions without compromise on safety and the standards of Air Arabia Utilizes data gathered from different sources to conduct analysis Like AMOS and CESAR, evaluate carried tasks, and facilitates actions for improving the efficiency of Airworthiness Functions. Recommends corrective actions and continuous improvement initiatives based on technical and operational trends.<br><br>People Management<br><br>Provides direction, coaching and guidance to team members for their career and professional development. Creates a conducive working environment to build and sustain a performance driven, engaged, and committed team. Ensures people management responsibilities are handled effectively in line with company procedures.<br><br>Qualifications (Academic, Training, Languages)<br><br>Bachelor’s degree in Aircraft/ Aeronautical/ Aerospace/ Mechanical/ Electronics/ Electrical Engineering or Aircraft License alternately a higher diploma or certificate in a relating field from a recognized university or engineering college combined with needed experience and exposure. Training certificates or workshops on “Human Factor” and “Safety” are a must. Training in Aircraft General Familiarization. Experienced in aircrafts airworthiness programs requirements and regulations, such as CAMO (Continuing Airworthiness Management Organization). Very good experience in aircraft maintenance programs systems, software and techniques and their relation to the Continued Airworthiness Program. Familiar with rules and regulations of Civil Aviation Authorities, pertaining to the Engineering Maintenance, policies, procedures, and manuals.<br><br>Work Experience<br><br>With 7-8 years’ experience in Maintenance planning role, out of which at least 2 years in a senior/ supervisory role. On the Job Training (OJT) or post university time spent at an Airline company as a Trainee or in a similar capacity shall be counted for as part of the experience. Experience with Airbus 320 aircraft is highly desirable.

<ul><li><p>Supervise day-to-day electrical installation and construction activities at power project sites.</p></li><li><p>Execute electrical works in accordance with approved drawings, specifications, method statements, and project requirements.</p></li><li><p>Supervise installation of electrical equipment, cables, cable trays, conduits, panels, switchgear, transformers, earthing, lighting, and associated systems.</p></li><li><p>Coordinate electrical works related to substations, power distribution systems, control rooms, and other project infrastructure.</p></li><li><p>Read and interpret electrical drawings, single-line diagrams, cable schedules, layouts, and installation details.</p></li><li><p>Coordinate with Electrical Engineers, QA/QC, HSE, civil teams, subcontractors, and other disciplines to ensure smooth execution.</p></li><li><p>Monitor manpower, tools, equipment, and material requirements to achieve planned productivity and project milestones.</p></li><li><p>Ensure proper cable laying, glanding, termination, tagging, dressing, and testing as per approved procedures.</p></li><li><p>Supervise installation and connection of electrical panels, switchgear, transformers, busbars, and other electrical equipment.</p></li><li><p>Ensure proper installation of earthing and lightning protection systems in accordance with approved drawings and specifications.</p></li><li><p>Coordinate with testing and commissioning teams for pre-commissioning checks and electrical testing activities.</p></li><li><p>Monitor work progress against project schedules and report delays, constraints, and resource requirements to the Site/Project Engineer.</p></li><li><p>Coordinate inspections with the QA/QC team and ensure timely closure of inspection observations and non-conformities.</p></li><li><p>Ensure all electrical materials and installations comply with approved specifications and project quality requirements.</p></li><li><p>Supervise subcontractors and ensure compliance with approved work procedures, drawings, safety standards, and schedules.</p></li><li><p>Maintain proper records of daily activities, manpower, materials, equipment, inspections, testing, and work progress.</p></li><li><p>Ensure safe isolation, lockout/tagout, permit-to-work, and other electrical safety procedures are strictly followed.</p></li><li><p>Conduct or participate in toolbox talks and ensure workers use appropriate PPE and safety equipment.</p></li><li><p>Maintain good housekeeping and safe working conditions at the project site.</p></li><li><p>Assist in troubleshooting electrical installation issues and coordinate corrective actions with engineers.</p></li><li><p>Support snagging, rectification, testing, commissioning, and final handover activities.</p></li><li><p>Ensure completed electrical works are properly protected and maintained until project handover.</p></li><li><p>Perform other duties related to electrical construction and site supervision as assigned by the project management team.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Key Skills</p><ul><li><p>Strong knowledge of electrical construction and installation practices.</p></li><li><p>Hands-on experience with power distribution systems, substations, switchgear, transformers, cables, and electrical equipment.</p></li><li><p>Ability to read and interpret single-line diagrams, electrical layouts, wiring diagrams, and cable schedules.</p></li><li><p>Good understanding of cable installation, termination, testing, earthing, and electrical equipment installation.</p></li><li><p>Knowledge of electrical testing and pre-commissioning activities.</p></li><li><p>Strong manpower, subcontractor, and site coordination skills.</p></li><li><p>Good knowledge of QA/QC and HSE requirements for electrical works.</p></li><li><p>Ability to identify technical and site issues and coordinate timely corrective actions.</p></li><li><p>Strong communication, teamwork, and problem-solving skills.</p></li><li><p>Ability to work effectively under project deadlines and challenging site conditions.</p></li></ul><p>Qualifications & Experience</p><ul><li><p>Diploma, ITI, or relevant technical qualification in <strong>Electrical Engineering/Electrical Trade</strong>.</p></li><li><p><strong>5–10 years of relevant experience</strong> in electrical construction and site supervision, preferably in power, substation, utility, industrial, or EPC projects.</p></li><li><p>Experience in <strong>power substations, transmission/distribution, or electrical infrastructure projects</strong> is preferred.</p></li><li><p>UAE/GCC project experience will be an advantage.</p></li><li><p>Familiarity with UAE electrical standards, utility requirements, and site safety practices will be preferred.</p></li></ul></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Supervise daily civil and architectural finishing activities at the site.</li><li>Coordinate and monitor masons, carpenters, painters, tilers, gypsum workers, and other finishing trades.</li><li>Ensure work is completed according to drawings, specifications, and quality standards.</li><li>Plan daily manpower allocation and monitor productivity.</li><li>Coordinate with engineers and subcontractors to achieve project milestones.</li><li>Maintain site safety and housekeeping standards.</li><li>Report daily progress and resolve site-related issues.</li><li>Supervise daily MEP activities, including electrical and plumbing works.</li><li>Coordinate MEP activities with civil and finishing teams.</li><li>Ensure work is executed according to approved drawings, specifications, and quality standards.</li><li>Monitor manpower, materials, and daily work progress.</li><li>Resolve site issues and report progress to the Site Engineer.</li><li>Ensure compliance with safety and project requirements.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Immediate joiners are preferred.</li><li>Candidates serving a notice period are welcome to apply.</li><li>Candidates with cancelled visas are highly preferred.</li><li>UAE experience is preferred.</li><li>Strong knowledge of civil and finishing works.</li><li>Ability to read construction drawings.</li><li>Good leadership and communication skills.</li><li>Good knowledge of electrical and plumbing systems.</li><li>Strong leadership and coordination skills.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b><br>The Resident Engineer will be responsible for overseeing the progress of construction projects, ensuring that they are completed on time, within budget, and to the satisfaction of all stakeholders. This role will require extensive on-site presence and coordination with various stakeholders during the entire construction process. <br>This role will be assigned in Abu Dhabi.<br>Key Responsibilities:<br>• Technical Delivery<br> <br> Supervise and coordinate all aspects of construction activities on-site, including material delivery, contractor schedules, labor resources, and equipment usage.<br> Reviewed the design proposals, work program, material submittals, method statements, shop drawings, payments, variation orders and claims, etc.<br> Effectively manage the site supervision staff during construction &amp; ensuring the works are being conducted according to the Contract specifications.<br> Ensure all contractors, subcontractors and workers adhere to project schedules, quality, and safety standards.<br> Work closely with designers and architects to ensure accuracy and compliance with plans and specifications.<br> Regularly review progress and status reports and advise on adjustments and changes to meet project requirements.<br> Provide updates to the client and project team on the project’s status, costs, and progress and request for approvals or change orders, as necessary.<br> Collaborate with project contractors to recommend innovative solutions that will improve the quality of the project as well as save the project cost.<br> Prepare and submit periodic project reports summarizing progress, schedules, and goals to the management team.<br> Collaborate with other Resident engineers in other projects in coordinating schedules, resources and finding solutions.<br> Ensure monitoring of the quality of materials and workmanship installed, operated, and maintained.<br> Maintain the Resident Engineer’s daily diary and daily diaries and reports by his subordinates. Liaise with Client, Project Management and Contractor for resolution of project issues, in addition to concerned Authorities when required.<br> Prepare weekly and monthly progress reports.<br> Familiarity with conditions of contract, and quality assurance.<br> Liaise with clients, co-ordination with Governmental Organization and other Consultants/Contractors<br> Consistently adheres to and enforces internal Company processes and policies such as business and contracting rules.<br> Demonstrates strong written and verbal communication and negotiating skills.<br> Works in a manner to ensure personal safety and that of fellow employees by following company health and safety guidelines and policies.<br>• Collaboration and working as part of a team.<br> Work in conjunction with engineers to solve project design problems, performing basic design calculations as required.<br> Conduct technical, feasibility studies and site investigations. <br> Liaison with teams Client, Contractor, supervision team, Engineering, to facilitate the completion of tasks and projects.<br> Good communicator.<br>• Client Service Management<br> Internal and external client Infrastructure liaison<br> Ability to build and maintain lasting and positive relationships.<br> Experience in utility diversions and management.<br>• Follow safe work practices and adhere to company guidelines and policies for planning and executing work in a safe manner.<br> Complete all work in line with Stantec Core Values and in accordance with the Stantec Quality Systems and Project Quality Procedures.<br> Design for safety, i.e., Construction Design Management.<br>• Other duties as requested from time to time by the Construction Manager<br><br><b>Qualifications</b><br>- The successful candidate will have Bachelor Degree in Civil engineering with 12 Years of experience in Drainage, Water network miscellaneous Projects. <br>- Candidate must have PMP certifications and proficient in PRIMAVERA and MS OFFICE .<br> - Candidate must have previous experience in dealing with Construction manager, CS site team, Client, Contractor and Suppliers.<br>- Experience with SWS Infra &amp; Water recycle Project Advantages<br> </div>

<p>We are seeking an experienced Industrial / Operations Engineer to oversee daily industrial operations, workforce management, and productivity monitoring within a large industrial plant environment. The ideal candidate should have hands-on experience in plant operations, manpower supervision, reporting, and coordination with client teams. Key Responsibilities: - Supervise and manage daily industrial operations and workforce activities. - Monitor manpower performance, productivity, attendance, and shift allocation. - Ensure smooth execution of operational activities as per client requirements. - Coordinate with operation and maintenance teams for daily activities. - Prepare daily operational reports, manpower reports, and productivity tracking reports. - Ensure compliance with safety procedures, permit systems, and site regulations. - Identify opportunities for operational improvements and resource optimization. - Handle operational challenges and ensure timely resolution. - Support workforce planning and improve overall efficiency.</p><p>- Bachelor’s Degree in Industrial Engineering / Mechanical Engineering or related field. - Minimum 3–4 years of experience in industrial operations, plant supervision, or workforce management. - Experience working in industrial plants or manufacturing environments in UAE is preferred. - Strong understanding of plant operations and manpower supervision. - Experience in productivity monitoring and operational reporting. - Proficiency in MS Office, especially Excel for tracking and reporting. - Strong communication, leadership, and problem-solving skills. - Ability to work in a plant environment and manage a large workforce. Preferred Candidate Background: - Candidates with experience in industrial services, maintenance contractors, manufacturing companies, or large-scale industrial operations are preferred.</p>

<ul><li><p>Experience in Gas Turbine & Steam Turbine Generator / Generator Transformer Protection systems of different Make like Areva/Siemens/Schneider/ABB/GE</p></li><li><p>Testing and commissioning of Power and Distribution Transformer Protection systems &nbsp;</p></li><li><p>Experience in control circuits troubleshooting of the HV/LV Switchgear and protection</p></li><li><p>Experience in HV Motors Protection systems</p></li><li><p>Experience in 132KV/33KV Gas Insulated Switchgear</p></li><li><p>Experience in Power and Distribution Transformer maintenance</p></li><li><p>Experience in HV/LV switchgear maintenance</p></li><li><p>HV cables, cable differential/feeder Protection systems</p></li><li><p>Low Impedance Bus Bar Protection systems such as REB500, REB670 and high Impedance bus bar protection systems</p></li><li><p>Competent of using the secondary and primary injection test kits</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>5 Years’ relevant experience in a heavy industry after Diploma</p></li><li><p>2 Years’ experience as an electrician after PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Excellent knowledge of written and spoken English</p></li><li><p>Familiarity with all maintenance tools and should have good IT Skills</p></li><li><p>Expertise in installation & troubleshooting</p></li><li><p>Ability to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul>

Key Responsibilities : * Experience in Gas Turbine &amp; Steam Turbine Generator / Generator Transformer Protection systems of different Make like Areva/Siemens/Schneider/ABB/GE * Testing and commissioning of Power and Distribution Transformer Protection systems

<p><strong>Role : </strong>BIM MEP Modeler (HVAC , Plumbing & Electrical)</p><p><strong>Experience:</strong> 3+ Years</p><p><strong>Requirements:</strong></p><ol><li><p>Proficient in Autodesk Revit MEP, Navisworks, and AutoCAD.</p></li><li><p>Experience in modelling <strong>MEP , HVAC Plumbing and Electrical services.</strong></p></li><li><p>Knowledge of MEP coordination, clash detection, and shop drawings.</p></li><li><p>Familiar with LOD standards and BIM workflows.</p></li><li><p>Good communication and coordination skills.</p></li><li><p>Immediate joiners or candidates with short notice will be preferred.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Minimum 3 years of experience as a BIM MEP & Electrical Modeler.</p></li><li><p><strong>Gulf (UAE/GCC) building project experience is mandatory.</strong></p></li><li><p>candidate <strong>should be in UAE</strong></p></li><li><p><strong>Prefer Immediate joiner or someone who can start within 7days</strong></p></li></ol>

With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis’ long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>Act as technical advisor for electrical bop & grid expert scope during developer bid review and RFP/specification preparation. Lead technical due diligence, verify compliance with project/off-taker requirements, identify risks and deviations, prepare clarifications, support technical evaluation, and contribute to contract schedules and negotiation support.<br><br><br><br>Qualifications<br><br>Bachelor’s degree in relevant engineering discipline Professional registration, chartership, or OEM/utility/off-taker experience is preferred<br><br><br>Additional Information<br><br>Required Experience<br><br>12+ years in power plant electrical systems, HV grid connection, protection/control, grid code compliance, owner’s engineer or utility review<br>Technical Expertise<br><br>Generator, IPB, GSUT/UAT, HV GIS/AIS, MV/LV switchgear, protection and control, metering, auxiliary power, black start/emergency supply, earthing, lightning, grid code, power system studies. IEC 60076, IEC 62271, IEC 61850, IEC 60255, IEC 60909, IEEE/IEC grounding standards, local Grid Code, ETAP/DIgSILENT/PSCAD as applicable<br>Commercial/Contract Awareness<br><br>Ability to read and comment on IPP/PPA/EPC technical schedules, guarantees, LD-linked performance clauses, interface obligations, acceptance testing requirements, and developer deviations

With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis’ long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>Act as technical advisor for electrical bop & grid expert scope during developer bid review and RFP/specification preparation. Lead technical due diligence, verify compliance with project/off-taker requirements, identify risks and deviations, prepare clarifications, support technical evaluation, and contribute to contract schedules and negotiation support.<br><br><br><br>Qualifications<br><br>Bachelor’s degree in relevant engineering discipline Professional registration, chartership, or OEM/utility/off-taker experience is preferred<br><br><br>Additional Information<br><br>Required Experience<br><br>12+ years in power plant electrical systems, HV grid connection, protection/control, grid code compliance, owner’s engineer or utility review<br>Technical Expertise<br><br>Generator, IPB, GSUT/UAT, HV GIS/AIS, MV/LV switchgear, protection and control, metering, auxiliary power, black start/emergency supply, earthing, lightning, grid code, power system studies. IEC 60076, IEC 62271, IEC 61850, IEC 60255, IEC 60909, IEEE/IEC grounding standards, local Grid Code, ETAP/DIgSILENT/PSCAD as applicable<br>Commercial/Contract Awareness<br><br>Ability to read and comment on IPP/PPA/EPC technical schedules, guarantees, LD-linked performance clauses, interface obligations, acceptance testing requirements, and developer deviations

The Department of Electrical Engineering (ELE) in the College of Engineering at the American University of Sharjah (AUS) invites applications for a Visiting faculty position at the assistant, associate, or full professor level, commencing in Fall 2027. The position is primarily focused on teaching and is a one-year renewable contract. The position is open to all areas of Electrical Engineering.<br><br>Applicants must hold a PhD in Electrical Engineering or a closely related field and be able to teach at both the undergraduate and graduate levels. Excellence in teaching and research, along with experience in the American model of higher education, are highly desirable.<br><br>Application Process<br><br>Applicants should fill out an application form and upload the required documents (PDF) using the following link. Required documents include a cover letter and a detailed curriculum vitae (including a teaching statement, a list of courses that can be taught or have been taught, and the names of at least three references willing to provide letters of recommendation). Only shortlisted candidates will be contacted. The Department of Electrical Engineering has approximately 265 undergraduate students, 44 graduate students, 16 full-time faculty, and 4 lab instructors. Faculty and students represent very diverse backgrounds and nationalities; approximately 90 nationalities are present on campus. The department offers a Bachelor of Science in Intelligent Systems and Mechatronics Engineering, a Master of Science in Electrical Engineering, and a joint PhD program in Electrical and Computer Engineering.<br><br>AUS is located in the Emirate of Sharjah (about 15 km from Dubai). AUS is an independent, not-for-profit, coeducational university, serving approximately 5,000 students. For more information, click here to visit our website. AUS is licensed and its programs are accredited by the Commission for Academic Accreditation of the Ministry of Education's Higher Education Affairs Division in the United Arab Emirates. AUS has been accredited in the United States of America by the Middle States Commission on Higher Education (1007 North Orange Street, 4th Floor, MB #166, Wilmington, DE 19801 USA) since June 2004. The Bachelor of Science in Electrical Engineering offered by the College of Engineering is accredited by the Engineering Accreditation Commission of ABET, https://www.abet.org/

Job Purpose<br>Agile Technology Solutions is seeking an experienced ELV QA/QC & Technical Documentation Engineer to ensure the quality of ELV/ICT installations while developing, reviewing and maintaining technical documentation throughout the project lifecycle. The role combines site QA/QC responsibilities with technical engineering documentation and requires a candidate who can translate project requirements, designs and site conditions into professional technical submissions and project records.<br>Key Responsibilities<br>Implement project QA/QC procedures, Project Quality Plans (PQP), Inspection & Test Plans (ITP) and approved quality requirements. Conduct site inspections for ELV/ICT installations and verify compliance with approved drawings, specifications, material approvals and applicable standards. Prepare, submit, track and close Material Inspection Requests (MIR), Work Inspection Requests (WIR), Requests for Inspection/Information (RFI), Site Observation Reports (SOR) and Non-Conformance Reports (NCR). Prepare and maintain Method Statements, ITPs, inspection checklists, installation procedures and testing procedures for ELV systems. Produce technical documentation for ELV scopes, including technical submittals, system descriptions, compliance statements, technical proposals, equipment schedules and technical reports. Prepare and review material submittals, technical datasheets, compliance matrices, product documentation and vendor submissions. Review project specifications, IFC drawings, shop drawings and BOQs and identify discrepancies, omissions or missing technical information. Coordinate preparation and review of shop drawings, schematic diagrams, system architecture drawings, equipment layouts, cable schedules and other ELV technical deliverables. Prepare and maintain testing & commissioning procedures, test sheets, inspection records and commissioning documentation. Coordinate with vendors and manufacturers to obtain technical data, certificates, test reports, approvals and other required documentation. Verify delivered materials against approved technical submittals and project requirements. Identify non-conformances and installation deficiencies and manage corrective and preventive actions through closure. Coordinate inspections and technical submissions with clients, consultants, main contractors, subcontractors and internal engineering/site teams. Conduct quality walk-throughs, monitor installation workmanship and ensure works are inspection-ready before formal consultant/client inspections. Manage snagging, punch lists and defect rectification through final closure. Maintain QA/QC registers and monitor inspection, approval and technical-document submission status. Support technical responses to consultant comments, RFIs and clarification requests. Compile as-built documentation, O&M manuals, testing & commissioning records, warranties, certificates and final handover dossiers. Ensure final technical documentation accurately reflects the installed systems and approved project configuration.<br>ELV/ICT Systems<br>The candidate should have practical experience across multiple systems, preferably including:ICT Infrastructure: structured cabling, fiber-optic cabling, LAN, Wi-Fi, network racks/cabinets and associated passive infrastructure. Security Systems: CCTV, Access Control, ANPR, Intercom, Intrusion Detection and related security systems. Other ELV Systems: AV, IPTV, Digital Signage, PA/BGM and other low-current systems.<br>Qualifications & Experience<br>Bachelor’s Degree in Electronics, Electrical, Telecommunications, ICT Engineering or a related discipline. Minimum 5 years of ELV/ICT experience, including hands-on QA/QC and technical documentation responsibilities. UAE/GCC construction, ELV contractor or systems-integrator experience preferred. Strong understanding of ELV installation, testing, commissioning and handover processes. Demonstrable experience preparing Method Statements, ITPs, MIRs, WIRs, RFIs, NCRs, technical submittals and handover documentation. Ability to understand and review technical specifications, BOQs, drawings, schematics and system architectures. Good knowledge of Auto CAD and Microsoft Office; experience with document-management/project platforms is advantageous. ISO 9001 Quality Management knowledge or Lead Auditor certification is an advantage. Strong written English and the ability to prepare professional client- and consultant-facing technical documents.<br>Key Competencies / Candidate Profile This position requires someone who is more than a QA/QC inspector or document controller. The successful candidate must have sufficient ELV technical knowledge to understand how systems are designed, installed, tested and commissioned, while being capable of independently producing high-quality technical documentation.<br>The role combines site QA/QC, technical documentation and ELV engineering support, with regular interaction with consultants, contractors, suppliers and project teams. Preference will be given to candidates from ELV/ICT system integrators or ELV contractors who have personally prepared technical submissions and QA/QC documentation rather than only coordinating or filing documents.<br>Location Dubai, UAE<br>Employment Type Fulltime | Onsite<br>Start Date Immediate

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About the Role</b></p><p>&nbsp;</p><p>The Flight Engineer will ensure proper maintenance of aircraft and expedient rectification of aircraft defects as directed by the Maintenance Manager.&nbsp;He will also provide supervision of maintenance staff, allocated to them by the Maintenance Manager, and ensure safe and on time dispatch of aircraft under their control.</p><p>&nbsp;</p><p><u>Primary Duties:&nbsp;</u></p><ul><li>Exercising their license/approval in relation to the accomplishment of scheduled, unscheduled maintenance and rectification of defects to ensure maintenance is accomplished to the required standards and the operating programme is achieved in an efficient and safe manner.&nbsp;</li><li>Recording and issuing of Certificates of Release to Service for the work accomplished in accordance with the current Maintenance Data, Company procedures and associated Regulatory requirements.</li><li>Reviewing the work and resources allocated and required to ensure expedient rectification of defects utilising allocated staff.</li><li>Advising the Maintenance Manager of any impending service disruptions, problems or areas of concern that may have an impact on the operating programme.&nbsp;Keeping the Maintenance Manager informed of all work performed by him during his duty period.</li><li>Ensuring staff under his immediate control adhere to published technical and safety requirements defined in published manuals and other publications.</li><li>Defining priorities to the staff allocated to him to ensure that efficient use of resources are channelled to an on time and safe flight departure.</li><li>Ensuring documentation and its certification is completed in a timely manner and to the defined procedures to meet Company requirements.</li><li>Ensure that replacement parts and components are of an approved type, correctly certified and released and are physically inspected prior to fitment to the aircraft or component.&nbsp;Ensure that removed components are correctly handled, labelled and blanked.</li><li>When supervising the work of others, ensuring that acceptable standards of workmanship and quality are maintained and the correct tools are employed to accomplish the task.</li><li>Reporting and compilation of technical delay reports in a timely manner, reporting significant defects, discrepancies, incidents, accidents and events as required.</li><li>Ensuring arriving aircraft are met by either the Certifying Engineer or Technician and crews are suitably debriefed to ensure defects are accurately defined and recorded.</li><li>Undertaking such other duties as may be reasonably directed by the Maintenance Manager.</li><li>Ensuring all safety precautions are complied with and actively participate in the Company SMS.</li></ul><p>&nbsp;</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><u>Minimum Qualifications / Experience:</u></p><ul><li>Valid CAR 66 or EASA B1 or B1/B2 Aircraft Maintenance License</li><li>Airbus A318/A319/A320 Type Rating is required</li><li>Additional type ratings on Bombardier Global Express, Falcon 6X/7X, and Challenger 604/605/650 are preferred</li><li>Minimum of 5 years’ experience in a corporate / VIP aviation environment</li><li>Prior Middle East experience is an advantage</li></ul><p>&nbsp;</p><p><u>Job-Specific Skills:</u></p><ul><li>Detail oriented methodical approach to solving/performing tasks&nbsp;</li><li>Ability to handle multiple tasks and work under pressure&nbsp;</li><li>Pride in performing to the best of own ability&nbsp;</li><li>Good communications and interpersonal skills&nbsp;</li><li>&nbsp;</li></ul><p>&nbsp;</p><p>&nbsp;</p><p><b>Please attach your aircraft maintenance engineer license in one file with your CV. Only applications with license will be considered.&nbsp;</b></p><p>&nbsp;</p><p>All positions are full time contract, with permanent residency in Dubai.&nbsp;Applicants must be a permanent resident of Dubai or be willing to relocate.&nbsp;Please ensure you specify the role you are qualified for – only those with the required qualifications will be contacted.</p><p><br></p><p><br></p></div>

<ul><li>Design and implement electrical systems for industrial equipment, ensuring optimal performance and safety standards are met.</li><li>Troubleshoot and resolve complex electrical issues in machinery, minimizing downtime and maximizing operational efficiency.</li><li>Develop and maintain electrical schematics, wiring diagrams, and technical documentation, ensuring accuracy and clarity.</li><li>Conduct preventative maintenance and inspections on electrical equipment, identifying potential problems and implementing solutions.</li><li>Collaborate with cross-functional teams, including mechanical engineers and production staff, to integrate electrical systems seamlessly.</li><li>Evaluate and select electrical components and equipment, considering factors such as cost, reliability, and performance.</li><li>Oversee the installation and commissioning of new electrical systems, ensuring proper functionality and adherence to regulations.</li><li>Provide technical support and training to maintenance personnel on electrical equipment operation and repair.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Is detail-oriented and organized, ensuring accuracy and thoroughness in all work.</li><li>Shows a proven ability to troubleshoot and diagnose electrical problems in industrial equipment.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Install, maintain, and repair complex electrical systems in heavy industrial settings, including power generation, manufacturing plants, and large-scale infrastructure projects.</p></li><li><p>Troubleshoot and diagnose electrical faults in high-voltage equipment, control systems, and motor drives using advanced diagnostic tools and schematics.</p></li><li><p>Interpret blueprints, technical drawings, and wiring diagrams to accurately plan and execute electrical installations and modifications.</p></li><li><p>Perform preventative maintenance on electrical machinery and distribution systems to ensure optimal performance and minimize downtime.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>3-4 yrs in heavy commercial vehicle.</p></li><li><p>Ability to use diagnostic tool and solve complex electrical and electronic issues </p></li><li><p>Knowledge of A/c Systems will be added advantage </p></li></ul><p></p></section>

<ul><li><p>Develop and maintain BIM models for civil, structural, electrical, MEP, and associated power-project disciplines.</p></li><li><p>Prepare and update 3D models based on approved engineering drawings, specifications, and project requirements.</p></li><li><p>Coordinate multidisciplinary BIM models to identify and resolve clashes and design interfaces.</p></li><li><p>Create and maintain coordinated BIM models for substations, control buildings, utility buildings, infrastructure, and associated facilities.</p></li><li><p>Develop detailed BIM models for architectural, structural, civil, electrical, mechanical, and MEP systems as required.</p></li><li><p>Review engineering drawings and technical documentation and translate design information into accurate BIM models.</p></li><li><p>Perform clash detection and coordination using appropriate BIM software and prepare clash reports for resolution.</p></li><li><p>Coordinate with Civil, Structural, Electrical, MEP, Design, Engineering, Construction, Planning, and QA/QC teams to resolve BIM-related issues.</p></li><li><p>Ensure BIM models are developed and maintained in accordance with approved BIM Execution Plans, project standards, naming conventions, Level of Development (LOD), and data requirements.</p></li><li><p>Prepare coordinated shop drawings, construction drawings, layouts, sections, details, schedules, and BIM-based deliverables.</p></li><li><p>Update models based on approved design changes, RFIs, site modifications, and construction updates.</p></li><li><p>Support construction teams by providing coordinated BIM information, layouts, drawings, and model-based solutions.</p></li><li><p>Coordinate BIM models with site conditions and identify potential constructability issues before construction.</p></li><li><p>Support quantity take-offs and extraction of material quantities from BIM models where required.</p></li><li><p>Assist in developing 4D/5D BIM deliverables by integrating model information with project schedules and cost data where applicable.</p></li><li><p>Maintain BIM model accuracy, integrity, version control, and document revision history.</p></li><li><p>Ensure all BIM deliverables comply with project-specific standards, client requirements, and applicable industry practices.</p></li><li><p>Coordinate with consultants, subcontractors, suppliers, and specialist BIM teams for model integration and information exchange.</p></li><li><p>Participate in BIM coordination meetings, design reviews, constructability workshops, and technical coordination sessions.</p></li><li><p>Prepare and maintain clash detection reports, model review reports, BIM registers, and coordination records.</p></li><li><p>Review and validate BIM models received from consultants, contractors, vendors, and subcontractors.</p></li><li><p>Support preparation of as-built BIM models based on approved construction records and site changes.</p></li><li><p>Ensure proper information management and timely submission of BIM deliverables through the project Common Data Environment (CDE).</p></li><li><p>Assist in developing BIM standards, templates, families, libraries, and workflows as required.</p></li><li><p>Provide technical support and guidance to project teams on BIM processes and model coordination.</p></li><li><p>Maintain accurate BIM documentation, model registers, drawing registers, and coordination records.</p></li><li><p>Support project handover by preparing final BIM models, asset information, and as-built documentation.</p></li><li><p>Identify opportunities to improve BIM workflows, coordination efficiency, design quality, and construction productivity.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree or Diploma in Civil Engineering, Architecture, Mechanical Engineering, Electrical Engineering, BIM, or a related discipline.</p></li><li><p>Typically 3–7 years of relevant BIM experience, preferably in power, infrastructure, EPC, construction, or engineering projects.</p></li><li><p>Strong experience in developing and coordinating multidisciplinary BIM models.</p></li><li><p>Proficiency in Autodesk Revit, Navisworks, AutoCAD, and other relevant BIM software.</p></li><li><p>Experience with BIM coordination, clash detection, model review, and construction documentation.</p></li><li><p>Good understanding of BIM workflows, BIM Execution Plans, LOD requirements, model coordination, and information management.</p></li><li><p>Ability to read and interpret civil, structural, electrical, mechanical, MEP, and architectural drawings.</p></li><li><p>Knowledge of multidisciplinary design coordination and construction interfaces.</p></li><li><p>Experience working with Common Data Environments (CDE) and document management systems.</p></li><li><p>Understanding of BIM standards and practices such as ISO 19650 is preferred.</p></li><li><p>Knowledge of 4D/5D BIM, quantity take-offs, and model-based project controls will be an advantage.</p></li><li><p>Strong attention to detail and ability to identify design clashes and coordination issues.</p></li><li><p>Good communication, coordination, analytical, and problem-solving skills.</p></li><li><p>Ability to work effectively with engineers, designers, consultants, contractors, and project teams.</p></li><li><p>Proficiency in MS Office and BIM documentation/reporting tools.</p></li><li><p>UAE/GCC project experience is preferred.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in power substations, transmission/distribution projects, utility infrastructure, or major EPC projects.</p></li><li><p>Experience developing BIM models for HV/EHV substations, control buildings, cable trenches, equipment foundations, and associated infrastructure.</p></li><li><p>Experience coordinating electrical and MEP services within substation and control-building environments.</p></li><li><p>Experience with Autodesk Revit, Navisworks Manage, Civil 3D, AutoCAD, and BIM 360/ACC or equivalent platforms.</p></li><li><p>Familiarity with UAE/GCC BIM requirements and client-specific BIM standards.</p></li><li><p>Experience with major EPC contractors, engineering consultants, and utility clients will be an advantage.</p></li><li><p>BIM certification or training in Revit, Navisworks, ISO 19650, or equivalent will be preferred.</p></li></ul><br><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<ul><li><p>Assist in planning and executing MEP activities for power projects, substations, control buildings, utility buildings, and associated facilities.</p></li><li><p>Review approved MEP drawings, specifications, shop drawings, equipment layouts, method statements, ITPs, and technical documentation.</p></li><li><p>Supervise installation of HVAC, ventilation, plumbing, drainage, firefighting, fire alarm, and other MEP systems.</p></li><li><p>Coordinate MEP activities with civil, structural, electrical, architectural, and other project disciplines.</p></li><li><p>Ensure MEP works are executed in accordance with approved drawings, specifications, method statements, project schedules, and applicable standards.</p></li><li><p>Assist in reviewing MEP shop drawings, material submittals, technical submissions, equipment schedules, and vendor documentation.</p></li><li><p>Coordinate with Procurement and Store teams to ensure timely availability of approved MEP materials, equipment, and consumables.</p></li><li><p>Supervise subcontractors and specialist contractors and monitor their manpower, productivity, workmanship, and compliance with project requirements.</p></li><li><p>Monitor daily MEP progress and report actual progress, delays, constraints, and resource requirements to senior management.</p></li><li><p>Assist in preparing work plans, look-ahead schedules, manpower requirements, and resource plans.</p></li><li><p>Coordinate with consultants, clients, suppliers, vendors, subcontractors, and internal teams to resolve technical and site-related issues.</p></li><li><p>Review and follow up RFIs, technical queries, inspection requests, and site instructions related to MEP works.</p></li><li><p>Coordinate MEP services to avoid clashes with civil, structural, electrical, and architectural elements.</p></li><li><p>Supervise installation of HVAC equipment, ductwork, chilled water/refrigerant piping, ventilation systems, pumps, tanks, plumbing fixtures, drainage networks, and associated equipment as applicable.</p></li><li><p>Assist in installation of firefighting systems, fire pumps, fire tanks, sprinkler systems, hydrants, hose reels, fire alarm systems, and other life-safety systems.</p></li><li><p>Monitor installation of emergency lighting, small power, control interfaces, BMS interfaces, and other associated building services.</p></li><li><p>Coordinate with electrical teams for power supply, control wiring, equipment connections, and integration of MEP systems.</p></li><li><p>Assist in pressure testing, flushing, cleaning, testing, balancing, functional testing, pre-commissioning, and commissioning of MEP systems.</p></li><li><p>Coordinate with QA/QC teams for inspections, testing, approvals, and closure of NCRs, punch points, and quality observations.</p></li><li><p>Conduct regular site inspections to verify workmanship, installation quality, and compliance with approved drawings.</p></li><li><p>Ensure MEP materials and equipment are installed according to manufacturer recommendations and approved technical requirements.</p></li><li><p>Monitor MEP material consumption, manpower, equipment utilization, and subcontractor performance.</p></li><li><p>Assist in quantity verification, BOQ review, material take-offs, variations, and additional works.</p></li><li><p>Identify technical, construction, procurement, and interface risks and escalate issues for timely resolution.</p></li><li><p>Ensure compliance with project HSE requirements, risk assessments, permit-to-work procedures, and safe working practices.</p></li><li><p>Participate in technical coordination meetings, progress meetings, site inspections, and client/consultant discussions.</p></li><li><p>Prepare daily and weekly progress reports and maintain MEP engineering and construction records.</p></li><li><p>Maintain approved drawings, inspection records, test reports, material certificates, commissioning documents, and as-built information.</p></li><li><p>Assist in snagging, rectification, testing, commissioning, and final handover activities.</p></li><li><p>Provide technical support to supervisors, technicians, subcontractors, and site personnel.</p></li><li><p>Support continuous improvement in MEP installation quality, productivity, safety, and project execution.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering, Electrical Engineering, MEP Engineering, or a related discipline.</p></li><li><p>Typically 3–7 years of relevant MEP engineering/construction experience, preferably in power, EPC, infrastructure, industrial, or large-scale construction projects.</p></li><li><p>Good knowledge of HVAC, ventilation, plumbing, drainage, firefighting, fire alarm, and associated building services.</p></li><li><p>Experience in MEP installation, site supervision, testing, commissioning, and handover.</p></li><li><p>Ability to read and interpret MEP drawings, layouts, schematics, specifications, equipment schedules, and technical documentation.</p></li><li><p>Good understanding of multidisciplinary coordination with civil, structural, electrical, and architectural teams.</p></li><li><p>Knowledge of applicable international standards, UAE regulations, authority requirements, and MEP codes.</p></li><li><p>Experience coordinating with subcontractors, vendors, consultants, and project teams.</p></li><li><p>Understanding of QA/QC procedures, ITPs, inspection requirements, method statements, and testing processes.</p></li><li><p>Good understanding of project planning, scheduling, resource management, and construction methodologies.</p></li><li><p>Proficiency in MS Office and relevant engineering/design software.</p></li><li><p>Strong communication, coordination, analytical, and problem-solving skills.</p></li><li><p>Ability to work effectively under pressure and meet project deadlines.</p></li><li><p>UAE/GCC project experience is preferred.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in power infrastructure, substations, transmission/distribution projects, or major EPC projects.</p></li><li><p>Exposure to MEP works for HV/EHV substations, control buildings, utility buildings, workshops, and ancillary facilities.</p></li><li><p>Experience with HVAC, firefighting, plumbing, drainage, ventilation, BMS, and building-services integration.</p></li><li><p>Familiarity with UAE utility/client requirements such as DEWA, TAQA/TRANSCO, or equivalent authorities.</p></li><li><p>Experience working with major EPC contractors, engineering consultants, and utility clients.</p></li><li><p>Relevant MEP certification or professional engineering membership will be an advantage.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Plan and execute testing &amp; commissioning activities for kitchen, cold room, ventilation, and laundry systems.</p></li><li><p>Conduct equipment inspections, functional testing, and performance verification.</p></li><li><p>Coordinate with MEP teams for electrical, plumbing, drainage, gas, steam, and ventilation connections.</p></li><li><p>Prepare commissioning reports, checklists, test records, and handover documents.</p></li><li><p>Ensure compliance with project specifications, safety standards, and authority requirements.</p></li><li><p>Coordinate with suppliers and manufacturers for technical support and troubleshooting.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Diploma/Bachelor’s degree in Mechanical, Electrical, Electromechanical, or related engineering field.</p></li><li><p>8–15 years of experience in testing &amp; commissioning of commercial kitchen, cold room, refrigeration, or laundry equipment.</p></li><li><p>Experience in hospitality, hotel, healthcare, airport, catering, or industrial projects.</p></li><li><p>Knowledge of MEP systems, refrigeration, ventilation, electrical systems, and BMS integration.</p></li><li><p>Strong coordination and reporting skills.</p></li><li><p>UAE experience preferred.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Develop and implement comprehensive Quality Assurance and Quality Control (QA/QC) plans tailored for civil engineering projects in Abu Dhabi's unique construction environment.</li><li>Conduct rigorous site inspections and material testing to ensure compliance with project specifications, local regulations (e.g., ADM, Estidama), and international standards.</li><li>Review and approve technical submittals, method statements, and shop drawings, verifying their adherence to design intent and quality requirements.</li><li>Manage and coordinate the activities of the QC inspection team, assigning tasks and ensuring timely and accurate reporting of findings.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Civil Engineering from a recognized university.</p></li><li><p>Minimum of 8-10 years of progressive experience in QA/QC roles within the civil construction sector, preferably in the UAE.</p></li><li><p>Possession of relevant certifications such as CSWIP, NEBOSH, or ASNT Level II is highly advantageous.</p></li><li><p>Proficiency in understanding and applying international standards (e.g., ACI, ASTM, BS) and local Abu Dhabi regulations (ADM, Estidama).</p></li></ul><p></p></section>

<ul><li><p>Manage day-to-day electrical store operations at the project site.</p></li><li><p>Receive and verify electrical materials, equipment, tools, and consumables against purchase orders, delivery notes, material requisitions, and approved specifications.</p></li><li><p>Check quantities, item descriptions, specifications, and physical condition of materials received.</p></li><li><p>Coordinate with QA/QC and engineering teams for inspection, approval, and release of electrical materials.</p></li><li><p>Ensure rejected, damaged, or non-conforming materials are properly identified, segregated, and documented.</p></li><li><p>Store electrical cables, switchgear, panels, transformers, cable trays, conduits, lighting equipment, earthing materials, electrical accessories, and consumables in designated areas.</p></li><li><p>Ensure appropriate storage, handling, preservation, and protection of sensitive electrical equipment and materials.</p></li><li><p>Maintain proper identification and traceability of materials, including item codes, batch numbers, serial numbers, cable drum numbers, and test certificates where applicable.</p></li><li><p>Issue electrical materials to construction and installation teams against approved material requisitions or authorized requests.</p></li><li><p>Maintain accurate records of material receipts, issues, returns, transfers, and stock balances.</p></li><li><p>Monitor minimum and maximum stock levels and coordinate with procurement and project teams for timely replenishment.</p></li><li><p>Maintain detailed records of cable drums and monitor cable receipt, storage, issuance, and consumption.</p></li><li><p>Conduct regular physical stock counts and reconcile inventory with ERP/system records and physical quantities.</p></li><li><p>Investigate and report stock discrepancies, shortages, excesses, damaged materials, and losses.</p></li><li><p>Maintain proper records for tools, testing equipment, electrical consumables, and other project assets.</p></li><li><p>Coordinate with logistics teams for loading, unloading, transportation, and delivery of materials to various work fronts.</p></li><li><p>Ensure materials are issued according to project priorities and construction schedules.</p></li><li><p>Monitor material consumption and support the project team in minimizing wastage and material losses.</p></li><li><p>Maintain proper housekeeping, stacking, labeling, and access within the electrical store.</p></li><li><p>Ensure safe handling and movement of heavy electrical equipment using appropriate lifting and handling methods.</p></li><li><p>Ensure compliance with HSE requirements for storage and handling of electrical materials, chemicals, batteries, and other hazardous items.</p></li><li><p>Prepare daily, weekly, and monthly stock and material movement reports.</p></li><li><p>Maintain all relevant store documentation, including Material Receipt Notes, Material Issue Notes, Material Return Notes, transfer records, and inventory reports.</p></li><li><p>Support internal and external audits by providing accurate inventory records and supporting documents.</p></li><li><p>Coordinate with engineering and construction teams to forecast material requirements based on project schedules.</p></li><li><p>Ensure obsolete, surplus, and slow-moving materials are identified and reported to management.</p></li><li><p>Perform other material-control and store-related duties assigned by the Project Manager or management.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong knowledge of electrical materials, equipment, tools, and consumables used in power and construction projects.</p></li><li><p>Good understanding of electrical store and inventory management practices.</p></li><li><p>Knowledge of receiving, inspection, storage, preservation, and issuance procedures.</p></li><li><p>Strong inventory control, documentation, and stock reconciliation skills.</p></li><li><p>Good understanding of material traceability and quality-control requirements.</p></li><li><p>Ability to identify electrical materials based on specifications, part numbers, ratings, and technical descriptions.</p></li><li><p>Knowledge of cable drum management and electrical material handling.</p></li><li><p>Good working knowledge of ERP/inventory management systems and MS Office.</p></li><li><p>Strong coordination skills with procurement, QA/QC, engineering, logistics, and construction teams.</p></li><li><p>Good organizational and record-keeping abilities.</p></li><li><p>Strong awareness of HSE requirements related to electrical materials and equipment.</p></li><li><p>Ability to work under pressure and manage multiple material requirements efficiently.</p></li></ul><p>Qualifications & Experience</p><ul><li><p>Diploma or equivalent qualification in <strong>Electrical Engineering, Stores/Materials Management, or a related discipline</strong>.</p></li><li><p><strong>5–10 years of relevant experience</strong> in electrical stores/material management, preferably in power, substation, infrastructure, industrial, or EPC projects.</p></li><li><p>Hands-on experience managing electrical materials for large-scale construction or power projects is preferred.</p></li><li><p>Experience handling <strong>switchgear, transformers, cables, cable trays, panels, earthing materials, lighting systems, and electrical accessories</strong> will be an advantage.</p></li><li><p>Experience in <strong>power transmission/distribution or substation projects</strong> is preferred.</p></li><li><p>UAE/GCC experience will be an advantage.</p></li><li><p>Familiarity with ERP systems, material management procedures, and UAE construction practices is preferred.</p></li></ul><p>Key Performance Areas</p><ul><li><p>Accurate electrical inventory and stock reconciliation.</p></li><li><p>Timely availability of electrical materials at work fronts.</p></li><li><p>Proper storage, preservation, and traceability of electrical materials.</p></li><li><p>Effective control of material wastage, damage, and losses.</p></li><li><p>Timely and accurate store documentation and reporting.</p></li><li><p>Compliance with project quality, HSE, and company procedures.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>