Electronics Engineer Jobs in UAE

⚓ SENIOR NAVIGATION & COMMUNICATIONS SYSTEMS ENGINEER ⚓???? Abu Dhabi, UAE????️ Defence???? Immediate Requirement???? Competitive Expatriate Package<br>A leading naval shipbuilding and defence organisation in Abu Dhabi is seeking an experienced Senior Navigation & Communications Systems Engineer (NAVCOM) to support major naval vessel programmes.<br>This position requires extensive experience with shipboard naval navigation and communications systems, ideally covering engineering, integration, installation, commissioning and sea trials.<br>The Role:???? Provide senior technical expertise across naval navigation and communications systems.???? Support the engineering, integration and onboard installation of NAVCOM equipment.???? Manage interfaces between NAVCOM equipment, Combat Management Systems and other shipboard systems.???? Work across communications technologies including HF, VHF, UHF, SATCOM and tactical communications.???? Support navigation systems including radar, GNSS/GPS, INS, gyro, ECDIS and associated bridge equipment where applicable.???? Support RF distribution, antenna systems and shipboard communications architecture.???? Review system specifications, drawings, interface documentation and equipment requirements.???? Troubleshoot complex integration, RF, communications and interface issues.???? Support setting-to-work, commissioning, HAT, SAT and sea trials.???? Coordinate with shipyard engineering teams, combat-system integrators, OEMs and specialist suppliers.<br>Requirements:⚙️ Degree in Electrical, Electronics, Telecommunications, Systems, Marine Engineering or a related discipline.⚙️ Significant experience with naval navigation and/or communications systems.⚙️ Strong knowledge of HF, VHF, UHF and SATCOM.⚙️ Experience with RF systems, antennas and shipboard communications architecture.⚙️ Knowledge of tactical communications, COMSEC and Tactical Data Links advantageous.⚙️ Knowledge of naval navigation systems including radar, GNSS/GPS, INS, gyro and ECDIS advantageous.⚙️ Experience integrating NAVCOM equipment with CMS and wider combat/mission systems highly desirable.⚙️ Strong installation, commissioning and troubleshooting capability.⚙️ HAT, SAT and sea-trial experience strongly preferred.⚙️ Previous experience on frigates, corvettes, OPVs or other naval vessels highly desirable.<br>Candidates must be willing to relocate to Abu Dhabi, UAE.

Role Overview The PLC & SCADA Engineer will design, develop, test, commission, and maintain PLC, HMI, and SCADA systems for water and wastewater treatment plants. The role involves integrating instrumentation, electrical systems, VFDs, analyzers, and field devices to ensure reliable and efficient plant operations.<br>Key Responsibilities Design and program PLC, HMI, and SCADA systems as per project specifications Develop control philosophies, I/O lists, network architecture, and automation documentation Configure communication protocols including Modbus RTU/TCP, Profibus, Profinet, Ethernet/IP, and OPCDevelop SCADA graphics, alarms, historical trending, reporting, user access, and security features Conduct FAT, SAT, I/O testing, loop checks, commissioning, and plant start-up support Troubleshoot automation, instrumentation, and communication issues Integrate field instruments such as flow, pressure, and level transmitters, and water quality analyzers Coordinate with electrical and mechanical teams during installation and commissioning Prepare FDS, operation manuals, commissioning reports, as-built documentation, and program backups.<br>Qualifications & Experience Bachelor's degree in Automation, Electrical, Electronics, or Instrumentation Engineering3–8 years of industrial automation experience, including at least 5 years in water or wastewater treatment projects Hands-on experience with PLC, HMI, SCADA systems, and industrial communication protocols.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Build and own the backend platform for a non custodial crypto payment product: core APIs, merchant accounts, and transaction services using Node.js and TypeScript. Develop the point of sale (POS) software interface: amount entry in AED, QR code generation, and a two-state payment display (instant on chain “Payment Confirmed” and same day “AED Settled”). Build the merchant dashboard: transaction history, settlement status, analytics, and wallet/settings management. Develop a blockchain event listener that reads on chain payment events and updates the POS and dashboard in real time (the bridge between the smart contract and the user interface). Integrate a licensed third party OTC provider for AED settlement via API. Integrate transaction screening tools (e.g. Chainalysis, Scorechain) into the payment and onboarding flow. Own infrastructure and security: AWS, PostgreSQL, Redis, webhooks, CI/CD, authentication, and audit logging</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>5+ years in DevOps / cloud engineering</p></li><li><p>Deep AWS expertise: VPC, IAM, KMS, ECS/EKS, RDS</p></li><li><p>Strong Terraform and CI/CD experience</p></li><li><p>Production experience in fintech, banking, or crypto (preferred)</p></li><li><p>Security and compliance mindset</p></li><li><p>PostgreSQL in production at scale</p></li><li><p>UAE-based or willing to relocate</p></li><li><p>Founding-engineer mindset: comfortable owning systems end-to-end with no layers above you</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Instrument and Controls Engineer - Offshore Subsea Project - Pkg 2<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;Job Title: Lead Instrument and Controls Engineer </u></b> </p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Client or Contractors Office in Abu Dhabi.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The Lead Instrument &amp; Controls Engineer is responsible for leading all Instrumentation, Control Systems, Functional Safety, and Automation engineering activities for ADNOC Offshore projects. The role ensures the delivery of safe, reliable, cost-effective, and compliant engineering solutions throughout FEED, Detailed Engineering, Procurement, Construction, Commissioning, and Start-up phases.</p><br><br><p>The position provides technical leadership for offshore process control systems, safety instrumented systems (SIS), distributed control systems (DCS), emergency shutdown systems (ESD), fire and gas systems (F&amp;G), telecommunications interfaces, and field instrumentation for offshore oil and gas facilities.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Engineering Leadership</b></p><br><br><ul><li>Lead and coordinate Instrumentation &amp; Control engineering activities across the project lifecycle.</li><li>Manage a team of I&amp;C engineers, designers, and specialists.</li><li>Ensure all engineering deliverables are completed in accordance with project schedules, quality standards, and ADNOC Offshore requirements.</li><li>Provide technical guidance, mentoring, and supervision to engineering personnel.</li><li>Review and approve all I&amp;C engineering deliverables.</li></ul><br><p><b>Instrumentation Engineering</b></p><br><br><ul><li>Develop and review:<ul><li>Instrument Index</li><li>I/O Lists</li><li>Instrument Datasheets</li><li>Instrument Specifications</li><li>Hook-up Drawings</li><li>Instrument Layout Drawings</li><li>Cable Schedules</li><li>Loop Diagrams</li><li>Cause &amp; Effect Matrices</li><li>Instrument Location Plans</li></ul></li><li>Ensure proper selection and specification of field instruments for offshore service conditions.</li></ul><p><b>Equipment Covered</b></p><br><br><ul><li>Pressure Transmitters</li><li>Temperature Instruments</li><li>Flow Meters</li><li>Level Instruments</li><li>Control Valves</li><li>On-Off Valves</li><li>Analyzers</li><li>Gas Detectors</li><li>Flame Detectors</li><li>Shutdown Valves</li><li>Instrument Air Systems</li></ul><br><p><b>Control Systems Engineering</b></p><br><br><ul><li>Lead design and implementation of:<ul><li>Distributed Control Systems (DCS)</li><li>Emergency Shutdown Systems (ESD)</li><li>Fire &amp; Gas Systems (F&amp;G)</li><li>Programmable Logic Controllers (PLC)</li><li>SCADA Systems</li><li>Wellhead Control Systems</li><li>Compressor Control Systems</li><li>Turbine Control Systems</li><li>Integrated Control &amp; Safety Systems (ICSS)</li></ul></li><li>Review and approve system architecture designs.</li><li>Ensure cybersecurity requirements are incorporated into automation systems.</li></ul><br><p><b>Functional Safety</b></p><br><br><ul><li>Participate in:<ul><li>HAZID Studies</li><li>HAZOP Reviews</li><li>SIL Assessments</li><li>Layer of Protection Analysis (LOPA)</li><li>Functional Safety Assessments (FSA)</li></ul></li><li>Develop and review:<ul><li>Safety Requirement Specifications (SRS)</li><li>SIL Verification Reports</li><li>Cause &amp; Effect Diagrams</li><li>Shutdown Philosophies</li></ul></li><li>Ensure compliance with IEC 61508 and IEC 61511 standards.</li></ul><br><p><b>Procurement &amp; Vendor Management</b></p><br><br><ul><li>Prepare technical requisitions and datasheets for I&amp;C equipment.</li><li>Conduct technical bid evaluations.</li><li>Review vendor documents and drawings.</li><li>Resolve technical queries from suppliers.</li><li>Monitor vendor performance and compliance with project requirements.</li></ul><p><b>Vendor Packages Typically Managed</b></p><br><br><ul><li>ICSS Packages</li><li>DCS Packages</li><li>F&amp;G Systems</li><li>Analyzer Systems</li><li>Metering Packages</li><li>Telecommunications Interfaces</li><li>Compressor Control Systems</li><li>Turbine Control Systems</li></ul><br><p><b>Interface Management</b></p><br><br><ul><li>Coordinate with:<ul><li>Process Engineering</li><li>Electrical Engineering</li><li>Mechanical Engineering</li><li>Telecom Engineering</li><li>Civil/Structural Engineering</li><li>Operations Teams</li></ul></li><li>Ensure seamless integration of Instrumentation and Control systems with electrical and communication systems.</li><li>Manage brownfield interfaces with existing ADNOC Offshore facilities.</li></ul><br><p><b>Offshore &amp; Brownfield Projects</b></p><br><br><ul><li>Lead I&amp;C engineering activities for:<ul><li>Offshore Production Platforms</li><li>Wellhead Towers</li><li>Artificial Islands</li><li>Gas Compression Facilities</li><li>Water Injection Facilities</li><li>Pipeline Systems</li><li>Subsea Facilities</li></ul></li><li>Support tie-in activities and shutdown execution.</li><li>Coordinate modifications to live operating facilities.</li></ul><br><p><b>Construction, Commissioning &amp; Start-Up Support</b></p><br><br><ul><li>Participate in:<ul><li>Factory Acceptance Tests (FAT)</li><li>Site Acceptance Tests (SAT)</li><li>Integrated FAT (IFAT)</li><li>Loop Checks</li><li>Pre-Commissioning Activities</li><li>Commissioning and Start-Up</li></ul></li><li>Review commissioning procedures and test protocols.</li><li>Provide technical support during site execution phases.</li></ul><br><p><b>Compliance &amp; Quality Assurance</b></p><br><br><ul><li>Ensure compliance with:<ul><li>ADNOC Offshore Standards</li><li>ADNOC Specifications</li><li>IEC Standards</li><li>ISA Standards</li><li>API Standards</li><li>ISO Standards</li><li>UAE Regulatory Requirements</li></ul></li><li>Support project audits and design reviews.</li><li>Ensure quality assurance procedures are followed throughout engineering activities.</li></ul><br><p><b>Qualifications</b></p><br><br><p><b>Education</b></p><br><br><ul><li>Bachelor's Degree in Instrumentation Engineering, Electronics Engineering, Control Systems Engineering, Electrical Engineering, or related discipline.</li><li>Master's Degree is an advantage.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>Minimum <b>15 years of Instrumentation &amp; Control Engineering experience</b> in Oil &amp; Gas projects.</li><li>Minimum <b>5–8 years in a Lead I&amp;C Engineer role</b> on offshore EPC/EPCM projects.</li><li>Proven experience with ADNOC Offshore, ADNOC Onshore, Saudi Aramco, QatarEnergy, or other major offshore operators.</li><li>Experience in both greenfield and brownfield offshore developments.</li></ul><br><p><b>Technical Knowledge</b></p><br><br><p><b>Mandatory</b></p><br><br><ul><li>ADNOC Offshore Engineering Standards.</li><li>Instrumentation Design and Specification.</li><li>DCS, ESD, PLC, SCADA and ICSS Systems.</li><li>Fire &amp; Gas Detection Systems.</li><li>Functional Safety Engineering.</li><li>SIL Assessment Methodologies.</li><li>Metering and Analyzer Systems.</li><li>Offshore Control System Architecture.</li><li>Commissioning and Start-up Activities.</li></ul><br><p><b>Preferred Software Knowledge</b></p><br><br><ul><li>AVEVA Instrumentation</li><li>SmartPlant Instrumentation (SPI / INtools)</li><li>AVEVA Engineering</li><li>AutoCAD</li><li>E3D</li><li>Navisworks</li><li>Aconex</li><li>Honeywell Experion</li><li>Yokogawa Centum VP</li><li>Emerson DeltaV</li><li>Siemens PCS7</li><li>Schneider EcoStruxure</li></ul><br><p><b>Key Competencies</b></p><br><br><p><b>Technical Competencies</b></p><br><br><ul><li>Instrumentation Design</li><li>Process Control Engineering</li><li>Functional Safety Engineering</li><li>ICSS Architecture Design</li><li>Fire &amp; Gas Engineering</li><li>Metering Systems Engineering</li><li>Control System Integration</li></ul><br><p><b>Leadership Competencies</b></p><br><br><ul><li>Engineering Team Leadership</li><li>Technical Decision Making</li><li>Resource Planning</li><li>Engineering Coordination</li><li>Mentoring &amp; Coaching</li></ul><br><p><b>Behavioral Competencies</b></p><br><br><ul><li>Analytical Thinking</li><li>Problem Solving</li><li>Communication Skills</li><li>Stakeholder Management</li><li>Attention to Detail</li><li>Collaboration</li></ul><br><p><b>Preferred Certifications</b></p><br><br><ul><li>TÜV Functional Safety Engineer (IEC 61511)</li><li>ISA Certified Automation Professional (CAP)</li><li>PMP Certification</li><li>Chartered Engineer (CEng)</li><li>Professional Engineer (PE)</li><li>ADNOC Approved Engineering Certifications</li></ul><br><br><br> </div>

<ol><li><p>Maintain, calibrate, troubleshoot, and optimize instrumentation associated with potable water, wastewater, and booster pump stations.</p></li><li><p>Monitor and maintain pressure transmitters, flow meters, suction/discharge pressure instruments, vibration sensors, temperature sensors, and motor monitoring devices.</p></li><li><p>Ensure proper operation of pump control systems including PLC-based sequencing, duty/standby changeover, and automatic start/stop functions.</p></li><li><p>Diagnose and rectify faults related to pump control circuits, motor control panels, VFDs, soft starters, and protection relays.</p></li><li><p>Monitor pump performance through SCADA and recommend corrective actions to improve efficiency and reliability.</p></li><li><p>Conduct functional testing of pump interlocks, shutdown logic, alarms, permissives, and protection schemes.</p></li><li><p>Support condition monitoring activities including vibration, bearing temperature, and motor health monitoring systems.</p></li><li><p>Maintain and troubleshoot air compressor control systems, air dryers, receivers, and pneumatic instrumentation.</p></li><li><p>Calibrate and maintain pressure switches, pressure transmitters, dew point analyzers, flow monitoring devices, and compressor instrumentation.</p></li><li><p>Ensure reliable operation of instrument air systems supporting actuated valves and plant automation equipment.</p></li><li><p>Monitor compressor status, alarms, pressure levels, and operating parameters through SCADA and local control systems.</p></li><li><p>Perform testing and maintenance of compressor protection functions, interlocks, emergency shutdowns, and sequencing controls.</p></li><li><p>Troubleshoot pneumatic control loops, solenoid valves, electro-pneumatic positioners, and air-operated actuators.</p></li><li><p>Coordinate preventive maintenance activities to ensure uninterrupted instrument air supply to critical water utility assets.</p></li><li><p>Analyze compressor performance and recommend measures to improve energy efficiency and system reliability.</p></li><li><p>Troubleshoot actuator communication and control issues with PLC, RTU, and SCADA systems.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in <strong>Instrumentation and Control Engineering or Electronics and Communication Engineering,</strong> with a strong academic record.</p></li><li><p><strong>TAQA Competency certification</strong> is an advantage.</p></li><li><p>Minimum 7-10 years of relevant industry experience in instrumentation and control systems.</p></li><li><p>Experience in the oil and gas, water and power plant is desired.</p></li></ul>

<ul><li><p>Bachelor's Degree or Diploma in Electrical Engineering, Electrical & Electronics Engineering, Mechatronics, Automation Engineering or related discipline.</p></li><li><p><strong>3–5 years of experience (Mandatory)</strong> in PLC programming, control panel wiring and commissioning.</p></li><li><p>Experience in manufacturing or industrial automation.</p></li><li><p>Strong knowledge of electrical control panel design.</p></li><li><p>Proficiency in AutoCAD Electrical, EPLAN or similar software.</p></li><li><p>Ability to prepare electrical schematics, SLDs and wiring diagrams.</p></li><li><p>Hands-on experience with FAT and commissioning.</p></li><li><p>Knowledge of VFDs, contactors, relays, timers, MCBs, MCCBs, safety relays and terminal blocks.</p></li><li><p>Good understanding of motor control circuits including Star-Delta starters.</p></li><li><p>Familiarity with international electrical standards.</p></li><li><p>Strong analytical, troubleshooting and communication skills.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Electrical Engineering, Control Systems Engineering, or a related field.</li><li>Professional Engineer (PE) license or EIT certification is highly advantageous.</li><li>Minimum of 5 years of progressive experience in electrical design and control system engineering.</li><li>Proven expertise in PLC programming (e.g., Rockwell, Siemens, Mitsubishi) and HMI development.</li></ul>

Job Description l Embedded HW/ Firmware Engineer<br>Location: DUBAI , UAE / Full time (on-site)/ Compensation: Competitive based on experience<br>Role Purpose: <br>A startup in Dubai is growing its deep-tech engineering, design and manufacturing team in Dubai. We are hiring an embedded HW and Firmware engineer to support various products development.<br>What you will do• Develop firmware for STM32 devices..● Read sensors such as IMU, GPS, radar, ultrasonic, and optional CAN.● Contribute to build/select a computer vision module.● Develop AI based algorithms for object detection/ lane detection/sensor fusion..etc.● Select and integrate the Mavlink module.● Build a telemetry solution.● Build a stable UART/USB serial packet protocol. ● Debug I2C, UART, GPIO, CAN, and timing issues.● Bench test the full sensors/controllers stack before system validation.● Support integration (mechanical and electrical) and testing efforts in the vehicle.● Generate technical documentation including system specification, test reports, wiring diagrams What we need● At least 1 year in Autonomous vehicle domain● At least 1 year in HW selection and firmware development in automotive or equivalent industry● At least 1 year of hands-on experience (instrumentation, testing, integration).● Proficiency with electronic debugging tools: oscilloscopes, CAN analysers..etc.● Experience in Firmware development for STM32 products. Qualifications:● Degree in embedded systems, electrical and electronics engineering or similar.● At least 2 years of experience in an R&D department or similar environment. Skills : ● Strong analytical and system level problem solving ● Effective communication within multidisciplinary engineering team<br>How to Apply Send CV and portfolio link to : careers@sulmi.aiEmail Subject: Embedded HW/ Firmware Engineer

Descon Engineering Limited is looking for an experienced Honeywell DCS Service Engineer to support commissioning, troubleshooting, maintenance, upgrades, and technical support activities for Honeywell Distributed Control Systems (DCS) within Oil & Gas facilities. Key Responsibilities Install, configure, test, commission, and troubleshoot Honeywell DCS systems. Support Honeywell Experion PKS Servers, Operator Stations, and C300 Controllers. Execute system upgrades, software updates, Mod Packs, and configuration changes. Perform loop checks, functional testing, startup support, and system validation. Diagnose and resolve hardware, software, network, and control system issues. Support virtualized environments and system infrastructure. Coordinate with operations, maintenance, and project teams during site activities. Prepare technical reports and commissioning documentation. Requirements Bachelor’s degree in electrical, Electronics, Instrumentation, Control Systems, or a related Engineering discipline.3–4 years of experience in Industrial Automation and Control Systems. Minimum 1–2 years of hands-on experience with Honeywell Experion PKS systems. Strong Oil & Gas industry experience. Proven experience in site installation, commissioning, and troubleshooting activities. Excellent communication and problem-solving skills. Technical Skills Honeywell Experion PKS R530 or higher C300 Controllers Honeywell Servers & Operator Stations DVM R800 Series Alarm Management Systems PHD Historian VMware Environment Industrial Networks and System Integration Preferred Qualifications Honeywell product certifications and training. Offshore commissioning experience. Site safety and access certifications.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary:</strong></p><br><p>The Telecom Site Engineer for substation projects is responsible for supervising and executing all telecommunication and SCADA-related works at site, ensuring compliance with design specifications, communication standards, safety requirements, and project schedules. This role involves installation, testing, integration, and commissioning of telecom systems such as SDH/MPLS equipment, RTUs, SCADA systems, teleprotection systems, CCTV, access control, PA systems, networking equipment, and associated communication infrastructure. The engineer plays a critical role in ensuring reliable communication between substations and control centers while coordinating with clients, vendors, contractors, and multidisciplinary teams for successful project execution.</p><br>Key Responsibilities:1. Site Execution &amp; Supervision<ul><li>Supervise day-to-day telecom and communication system installation activities at the substation site.</li><li>Ensure installation of telecom equipment such as SDH/MPLS routers, switches, RTUs, teleprotection systems, CCTV, access control systems, PA systems, and associated cabling as per approved drawings and specifications.</li><li>Monitor contractor activities and ensure proper deployment of manpower, tools, and resources.</li><li>Verify installation quality, cable routing, termination, labeling, and system integration works.</li><li>Ensure all telecom activities are completed in accordance with project schedules and milestones.</li></ul>2. Installation &amp; Commissioning<ul><li>Oversee installation, testing, configuration, and commissioning of telecom and SCADA systems.</li><li>Coordinate with OEMs, vendors, and specialists during equipment installation and system integration.</li><li>Conduct pre-commissioning checks and ensure communication links are operational and stable.</li><li>Assist in troubleshooting communication failures, network issues, and interface problems during commissioning.</li><li>Maintain records of testing, commissioning activities, and acceptance reports.</li></ul>3. Quality Control &amp; Inspection<ul><li>Ensure all telecom works comply with project specifications, approved method statements, client requirements, and quality standards.</li><li>Conduct routine inspections and prepare inspection reports.</li><li>Raise site observations and ensure timely implementation of corrective actions.</li><li>Coordinate with QA/QC engineers for inspections, testing, and approvals.</li><li>Verify delivered telecom materials and equipment against approved technical specifications.</li></ul>4. Coordination &amp; Communication<ul><li>Coordinate with electrical, protection, SCADA, and civil teams to ensure smooth execution of telecom activities.</li><li>Liaise with subcontractors, vendors, consultants, and clients regarding telecom installations and testing.</li><li>Participate in daily, weekly, and progress review meetings and provide updates on telecom works.</li><li>Resolve site issues and technical conflicts in coordination with the engineering and commissioning teams.</li><li>Support interface management between substation equipment and control centers.</li></ul>5. Health, Safety, and Environment (HSE)<ul><li>Ensure all telecom activities are performed in compliance with project HSE requirements and safety regulations.</li><li>Enforce the use of PPE and adherence to safe work practices.</li><li>Conduct safety inspections and participate in toolbox talks.</li><li>Identify potential risks associated with telecom installations and implement mitigation measures.</li><li>Report incidents, near misses, and unsafe conditions and ensure corrective actions are implemented.</li></ul>6. Documentation &amp; Reporting<ul><li>Maintain daily site reports, progress reports, testing records, and activity logs.</li><li>Prepare Material Inspection Requests (MIR), Work Inspection Requests (WIR), testing reports, and commissioning checklists.</li><li>Maintain records of approved drawings, revisions, site instructions, and technical documents.</li><li>Assist in preparing as-built drawings and final project documentation.</li><li>Ensure proper handover documentation and operation manuals are submitted.</li></ul>Qualifications and Requirements:Education:<ul><li>Bachelor’s Degree in Electronics, Telecommunication, Electrical Engineering, or a related discipline.</li></ul>Experience:<ul><li>8–12 years of experience in telecom system installation and commissioning for substations, power utilities, or infrastructure projects.</li><li>Experience in high-voltage substations (132kV, 220kV, 400kV) is preferred.</li><li>Experience with SCADA, RTU, teleprotection, networking, and communication systems is highly desirable.</li></ul>Technical Skills:<ul><li>Strong knowledge of substation telecom and communication systems, including SDH, MPLS, RTU, SCADA, teleprotection, CCTV, access control, and networking equipment.</li><li>Ability to read and interpret telecom schematics, network architecture diagrams, cable schedules, and engineering drawings.</li><li>Familiarity with IEC 61850, IEC 60870-5-104, DNP3, and utility communication standards.</li><li>Knowledge of testing, configuration, integration, and commissioning procedures.</li><li>Understanding of fiber optic cable installation, splicing, testing, and troubleshooting.</li></ul>Soft Skills:<ul><li>Strong analytical and problem-solving abilities.</li><li>Good communication and stakeholder coordination skills.</li><li>Ability to work under pressure and meet project deadlines.</li><li>Strong teamwork and leadership capabilities at site.</li></ul>Key Competencies:<ul><li>Telecom System Installation &amp; Commissioning</li><li>SCADA &amp; Communication Network Integration</li><li>Technical Knowledge of Utility Communication Systems</li><li>Quality Assurance &amp; Control</li><li>Safety Awareness</li><li>Coordination &amp; Teamwork</li><li>Troubleshooting &amp; Problem Resolution</li></ul>Working Conditions:<ul><li>Primarily site-based role with exposure to outdoor and construction environments.</li><li>May require extended working hours during critical installation and commissioning activities.</li><li>Involves field inspections, testing, troubleshooting, and coordination with multiple stakeholders during project execution.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><strong>Requisition Number:</strong> 24555BR<br><strong>Description:</strong><br>Stantec is looking to hire a OT Cyber Security Engineer for 6 months for various projects in Abu Dhabi.<br>- Responsible for leading Overall OT/IT cyber security for major Master Control Centre/ Water Network OT projects.<br>- Responsible for reviewing Cyber Security Plan for the project for approval from Client.<br>- Reviewing network architectures and determining if good practices are being followed (e.g., the "zones &amp; conduits" concept, proper network segmentation, use of Industrial DMZ, etc.); and providing recommendations to comply with applicable cybersecurity framework.<br>- Reviewing security products utilized (e.g., firewalls, IDS, IPS) and determining if they are configured properly.<br>- Monitor deployment of network infrastructure devices (e.g., switches, routers, etc.), security appliances (e.g., firewalls, IDS, etc.), and virtualization solutions<br>- Reviewing security policies, plans, and procedures; assessing network monitoring capabilities; analyzing system logs, security events, and packet captures to identify security threats; and providing recommendations to comply with applicable cybersecurity framework.<br>- Lead design reviews/workshops, reviewing/ recommending EPC contractor’s deliverables, Lead interfaces with various Package Vendors, prepare gap analysis against the project requirements for various control systems supplied by package vendors.<br>- Responsible for reviewing security products utilized (e.g., firewalls, IDS, IPS) and determining if the proposed configuration meets Project requirement and Industry standards.<br>- Responsible to review security policies, plans, and procedures; assessing network monitoring capabilities; analyzing system logs, security events, and packet captures to identify security threats; and providing recommendations and work with SCADA/ Control system contractor to comply with applicable cybersecurity framework.<br>- Review administrative, technical, and physical security controls proposed by SCADA/ Control system contractor and providing recommendations to mitigate the identified security risks.<br>- Participate and contribute to Cyber security workshops, vulnerability, and risk assessments with SCADA/ Control system contractor to identify security risks and threats (e.g., unsecure remote access points, suspicious remote connections, unauthorized devices on the network, etc.) and providing recommendation to remediate the identified issues, Prepare Report/Update/Maintain and coordinate with all parties to close out action points.<br>- Review/Comments contractor submitted detailed diagrams (e.g., network, cabling, server, rack, logical architecture, etc.), procedures, and plans (e.g., implementation, SAT, mitigation, etc.) as needed to support projects.<br>- Responsible to handle Technical Queries/issues from all stake holders, document review/approval of Automation &amp; Package vendors, certification requirements if any, participate in regular meetings with vendors &amp; Client<br>- Responsible to lead and participate in SCADA/ Control system contractor cyber security test at FAT locations, Responsible to accept the test and signoff reports.<br>- Responsible for coordination with client, subcontractors, other discipline engineers and Project team.<br>- Participating in cross-functional and inter-office meetings to provide design input to Engineering team.<br>- Proactively identify and mitigate technical risks during project stage.<br>- Travel to the client's site location as and when required.<br>- Support the construction, commissioning, and start-up activities, to ensure no delay.<br><strong>Qualifications:</strong><br>B.E./ Tech. in IT/OT Cybersecurity/ Electrical/ Electronics/ Instrumentation engineering with 10+ years' experience in designing, testing, installing, testing &amp; commissioning of OT cybersecurity systems in major water &amp; wastewater projects or Master Control Centre/ Data Centre projects.<br>Experience within the UAE or GCC region will be preferred.<br>Location: Abu Dhabi, UAE<br><strong>About Stantec:</strong><br>We’re active members of the communities we serve. That’s why at Stantec we always design with community in mind. We believe growing a great design company happens from the inside out. We look for people who are drawn to use every talent they possess, plus creativity, determination and a drive to do the extraordinary.<br>The Stantec community unites approximately 22,000 employees working in over 400 locations across six continents. We collaborate across disciplines and industries to bring projects to life. Our work as architects, engineers, and consultants from initial project concept and planning through design, construction and commissioning is built on a solid history of success. So, when we take on a project, we see the opportunity to make a lasting connection with the people and places where we live and work. Redefine your personal best. Join us!<br><strong>Work Location(s):United Arab Emirates-Abu Dhabi</strong><br><strong>Employment Type:</strong> <strong>Full-Time</strong><br><strong>Job Type:</strong> <strong>Regular</strong><br><strong>Job Category:</strong> <strong>Internet/WWW</strong></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Lead the design and implementation of complex control systems for industrial processes, ensuring optimal performance and safety.</li><li>Develop and execute commissioning plans for new instrumentation and control systems, troubleshooting issues to ensure seamless integration.</li><li>Provide expert technical guidance and mentorship to junior engineers and technicians on instrumentation and control engineering principles.</li><li>Oversee the selection, specification, and procurement of critical instrumentation and control hardware and software components.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's or Master's degree in Electrical, Electronics, Instrumentation Engineering, or a related field.</p></li><li><p>Minimum of 15 years of progressive experience in instrumentation and control engineering within the chemical, oil &amp; gas, or pharmaceutical industry.</p></li><li><p>Professional Engineer (PE) license or relevant professional certifications (e.g., ISA Certified Control Systems Engineer - CCSE) are highly desirable.</p></li><li><p>Proficiency in PLC/DCS programming (e.g., Siemens, Rockwell, Honeywell) and SCADA systems.</p></li></ul><br><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in Pipeline / Oil &amp; Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><br><p><strong>Age Criteria:</strong></p><ul><li><p>Maximum age limit is 49 years</p></li><li><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience</p></li></ul><br><p><strong>Managerial and SR. Positions:</strong></p><ul><li><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory</p></li></ul><p></p></section>

???? WE'RE HIRING???? MODIFICATION ENGINEER???? DUBAI, UAE???? FULL-TIME???? LEVEL: ENGINEERING / TECHNICAL SPECIALIST✨ ENGINEER SOLUTIONS. IMPROVE DESIGNS. DELIVER TECHNICAL EXCELLENCE. We are looking for an experienced Modification Engineer to join our growing team in Dubai. The ideal candidate will have strong engineering knowledge, technical problem-solving skills, and the ability to manage design modifications, system improvements, and engineering changes while ensuring quality, safety, and performance standards.???? KEY RESPONSIBILITIES???? Analyze existing designs, systems, and equipment to identify modification requirements.???? Develop and implement engineering modifications based on technical specifications and project needs.???? Prepare engineering drawings, technical documents, and modification proposals.???? Coordinate with design, production, maintenance, and quality teams to execute modifications effectively.???? Evaluate technical risks and ensure modifications comply with engineering standards and regulations.???? Conduct inspections, testing, and validation of modified systems or components.???? Troubleshoot technical issues and provide effective engineering solutions.???? Maintain accurate records of engineering changes, revisions, and project documentation.???? Support continuous improvement initiatives to enhance system reliability and performance.✅ REQUIREMENTS???? Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Electronics Engineering, Aerospace Engineering, or a related field (preferred).???? Strong Engineering Modification & Technical Design Experience Required.???? Proven experience in engineering changes, system upgrades, design improvements, or technical modifications.???? Proficiency in engineering design tools such as Auto CAD, Solid Works, CATIA, or similar software is an advantage.???? Strong understanding of engineering principles, drawings, specifications, and technical documentation.???? Excellent analytical, troubleshooting, and problem-solving skills.???? Strong communication, coordination, and teamwork abilities.???? Ability to work effectively in a multicultural environment.???? Valid UAE Employment Visa / Work Authorization Required.⚠️ Candidates must have legal eligibility to work in the UAE. Visit Visa and Tourist Visa holders are not eligible for employment.???? WHY JOIN US????? Competitive Salary???? Technical Training & Professional Development???? International Team???? Advanced Engineering Projects???? Career Growth Opportunities???? Performance Bonus???? Professional Work Environment???? INTERESTED? APPLY NOWIf you are interested in this opportunity, please send us a message and let us know. We will provide more details about the role and the next steps.???? Send your CV / Resume and join our team in Dubai, UAE.

???? WE'RE HIRING???? MODIFICATION ENGINEER???? DUBAI, UAE???? FULL-TIME???? LEVEL: ENGINEERING / TECHNICAL SPECIALIST✨ ENGINEER SOLUTIONS. IMPROVE DESIGNS. DELIVER TECHNICAL EXCELLENCE. We are looking for an experienced Modification Engineer to join our growing team in Dubai. The ideal candidate will have strong engineering knowledge, technical problem-solving skills, and the ability to manage design modifications, system improvements, and engineering changes while ensuring quality, safety, and performance standards.???? KEY RESPONSIBILITIES???? Analyze existing designs, systems, and equipment to identify modification requirements.???? Develop and implement engineering modifications based on technical specifications and project needs.???? Prepare engineering drawings, technical documents, and modification proposals.???? Coordinate with design, production, maintenance, and quality teams to execute modifications effectively.???? Evaluate technical risks and ensure modifications comply with engineering standards and regulations.???? Conduct inspections, testing, and validation of modified systems or components.???? Troubleshoot technical issues and provide effective engineering solutions.???? Maintain accurate records of engineering changes, revisions, and project documentation.???? Support continuous improvement initiatives to enhance system reliability and performance.✅ REQUIREMENTS???? Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Electronics Engineering, Aerospace Engineering, or a related field (preferred).???? Strong Engineering Modification & Technical Design Experience Required.???? Proven experience in engineering changes, system upgrades, design improvements, or technical modifications.???? Proficiency in engineering design tools such as Auto CAD, Solid Works, CATIA, or similar software is an advantage.???? Strong understanding of engineering principles, drawings, specifications, and technical documentation.???? Excellent analytical, troubleshooting, and problem-solving skills.???? Strong communication, coordination, and teamwork abilities.???? Ability to work effectively in a multicultural environment.???? Valid UAE Employment Visa / Work Authorization Required.⚠️ Candidates must have legal eligibility to work in the UAE. Visit Visa and Tourist Visa holders are not eligible for employment.???? WHY JOIN US????? Competitive Salary???? Technical Training & Professional Development???? International Team???? Advanced Engineering Projects???? Career Growth Opportunities???? Performance Bonus???? Professional Work Environment???? INTERESTED? APPLY NOWIf you are interested in this opportunity, please send us a message and let us know. We will provide more details about the role and the next steps.???? Send your CV / Resume and join our team in Dubai, UAE.

Key Responsibilities Assist in the commissioning, testing, and troubleshooting of lighting control systems. Support the installation and configuration of KNX-based lighting control systems. Perform site testing, device addressing, and system validation. Assist with the integration of lighting control systems with BMS, HVAC, AV, and Security Systems. Prepare commissioning reports, test records, and as-built documentation. Coordinate with project teams, consultants, contractors, and clients during project execution. Requirements Bachelor's Degree or Diploma in Electrical or Electronics Engineering.2–3 years of experience in commissioning, lighting control systems, home automation, or electrical systems. Experience with KNX or similar home automation systems is preferred. Knowledge of DALI, KNX, Ethernet, and RS-485 communication protocols. Knowledge of Lutron lighting control systems will be an added advantage. Strong troubleshooting, communication, and teamwork skills. UAE Driving License is an advantage.

Role Description The Electrical Engineer / Quality Engineer is responsible for supporting electrical engineering activities while ensuring that products, systems, processes, and project deliverables meet established quality, safety, performance, and regulatory requirements. The role combines technical engineering knowledge with quality assurance and continuous improvement practices. Key responsibilities include reviewing electrical designs, specifications, drawings, calculations, and technical documentation to ensure compliance with applicable standards and project requirements. The role involves supporting electrical testing and commissioning activities, identifying technical issues, investigating defects, and developing practical solutions to improve system reliability and performance. The Quality Engineer function includes establishing and monitoring quality requirements, conducting inspections and audits, reviewing test results and quality records, and identifying non-conformities. The successful candidate will support root cause analysis, corrective and preventive actions, process improvement initiatives, and quality control activities throughout the project or production lifecycle. The role also requires effective coordination with engineering, production, procurement, project, and other relevant teams to resolve quality and technical issues. Strong analytical thinking, attention to detail, technical problem-solving, and a commitment to engineering and quality standards are essential. Qualifications Bachelor’s degree in Electrical Engineering, Electronics Engineering, Quality Engineering, or a related discipline. Strong understanding of electrical engineering principles, electrical systems, testing methods, and technical documentation. Knowledge of electrical codes, standards, safety requirements, and relevant industry regulations. Understanding of quality management systems, quality assurance, quality control, inspection, testing, and process improvement. Ability to interpret electrical drawings, schematics, specifications, technical reports, and quality documentation. Familiarity with root cause analysis, corrective and preventive actions, non-conformance management, and quality improvement methodologies. Ability to conduct inspections, review test results, identify defects, and assess compliance with defined requirements. Strong analytical, troubleshooting, and problem-solving skills. Good understanding of engineering risk assessment and quality control principles. Proficiency in Microsoft Office and relevant engineering, testing, or quality management software. Strong attention to detail and accuracy in technical and quality-related work. Excellent communication and coordination skills, with the ability to work effectively across multidisciplinary teams. Ability to prepare clear technical reports, inspection records, quality documentation, and performance summaries. Proactive, systematic, and results-oriented approach to technical and quality challenges.

Company Description Codebrew | A Creative Technology Studio is a UAE-based studio that designs and engineers custom interactive experiences for events and permanent installations worldwide. The team blends creativity with software, AI, and advanced interactive technology to help brands, venues, and organizers build immersive experiences that audiences actively engage with. Projects range from interactive games and digital activations to AI-powered applications, projection mapping, and sensor-based installations. Codebrew also develops bespoke engagement technologies for exhibitions, museums, and public spaces, ensuring each solution is tailored to the client’s audience, brand, and vision.<br>Role Description In this full-time, on-site Mechatronics Engineer role based in Dubai, the engineer will design, develop, and integrate mechanical, electrical, and electronic systems for interactive installations and experiential technologies. Daily tasks include translating creative concepts into technical specifications, building prototypes, selecting and integrating sensors, actuators, controllers, and related hardware, and ensuring reliable operation of installations. The engineer will perform testing, troubleshooting, calibration, and preventive maintenance, as well as support setup and teardown for events and permanent spaces. Collaboration with designers, software engineers, and project managers is essential to deliver robust, safe, and engaging interactive experiences that meet client requirements and project timelines.<br>Qualifications<br> Candidates should possess strong Mechatronics skills, including system integration, automation, and control of interactive and experiential hardware. Candidates should possess Electrical Engineering and Electronics skills, such as circuit design, wiring, power distribution, and sensor/actuator integration. Candidates should possess Electromechanics and Maintenance & Repair skills, including diagnostics, mechanical assembly, and hands-on equipment upkeep. Bachelor’s degree (or equivalent) in Mechatronics, Electrical/Electronic Engineering, Robotics, or a closely related field. Experience with microcontrollers, PLCs, and embedded systems; familiarity with industrial communication protocols is an advantage. Basic proficiency in CAD tools and an understanding of mechanical design principles for fixtures, mounts, and enclosures. Ability to read technical drawings and schematics, and to apply safety standards and best practices in electrical and mechanical work. Strong problem-solving skills, attention to detail, and ability to work collaboratively in multidisciplinary teams under event-driven timelines. Comfort working on-site at venues, with occasional evening or weekend work as required by project schedules.

SENIOR BIOMEDICAL SERVICE ENGINEER | DUBAI, UAE<br><br>Position Title: Senior Laboratory Instrument Service Engineer<br><br>Location: Dubai, UAE (Onsite)<br><br>Contract Type: Full-Time Permanent<br><br>Role Overview<br><br>Our Client is a well-established medical and surgical equipment trading company based in Dubai, seeking a highly skilled Senior Biomedical Engineer with hands-on experience across leading analytical and diagnostic instrument brands. The successful candidate will be responsible for the installation, maintenance, and technical support of laboratory equipment across client sites in the UAE.<br><br>Key Responsibilities<br><br> Install, commission, and calibrate laboratory analytical and diagnostic instruments at client sites. Perform preventative and corrective maintenance across a wide range of laboratory equipment brands. Diagnose and troubleshoot complex technical faults; carry out prompt and effective repairs. Provide technical support and end-user training on instrument operation, maintenance, and safety protocols. Maintain accurate service records, calibration logs, and technical documentation. Liaise with manufacturers, suppliers, and internal teams to source spare parts and technical resources. Ensure all installations and maintenance activities comply with UAE regulatory and laboratory safety standards. Respond promptly to client service requests and after-hour call-outs as required.<br><br><br>Required Experience & Skills<br><br> Bachelor's Degree in Biomedical Engineering, Electronics, or a related discipline. Proven hands-on experience servicing laboratory analytical instruments from leading brands including Agilent, Thermo Fisher, Shimadzu, Perkin Elmer, Beckman Coulter, Waters, Bio-Rad, Roche, Siemens, Mindray, Sysmex, or similar platforms. Strong diagnostic, calibration, and troubleshooting skills across analytical and diagnostic laboratory equipment. UAE engineering registration or licence is strongly preferred. Excellent communication and client-facing skills with a customer-first approach. Ability to work independently and as part of a team in a fast-paced environment. Must be currently based in Dubai or the wider UAE candidates already in the UAE will be given strong preference.<br><br><br>Apply Now<br><br>Send your CV to talent@leadingedge.plus with the job title in the subject line.

<br><ul><li><p>Execute end-to-end instrumentation pre-commissioning, commissioning, startup, and system handover activities for Oil & Gas EPC projects.</p></li><li><p>Perform calibration, loop checking, functional testing, and troubleshooting of field instruments, control valves, analyzers, PLC, DCS, ESD, and F&G systems.</p></li><li><p>Coordinate with Construction, Electrical, QA/QC, Operations, and Client teams to ensure safe and timely project execution.</p></li><li><p>Conduct system walkdowns, manage punch lists, verify mechanical completion, and support plant startup activities.</p></li><li><p>Ensure compliance with project specifications, IEC/ISA standards, client requirements, and HSE regulations.</p></li><li><p>Prepare commissioning procedures, test records, as-built documentation, and final handover dossiers.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Instrumentation/Electronics Engineering with 10+ years of Instrumentation Commissioning experience in Oil & Gas EPC projects. UAE/GCC experience preferred.</p>

Role: Electrical Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Contract Payout: $60 - $80/hour<br>Role Overview:We are hiring for one of our clients, seeking a contract Electrical Engineer to design, develop, and validate electrical systems for high-impact projects across multiple industries. The role involves end-to-end engineering execution from concept to deployment, ensuring compliance with industry standards and project specifications.<br>Key Responsibilities:• Design and simulate electrical circuits, power systems, and control systems using industry-standard tools and methodologies.• Develop and review electrical schematics, PCB layouts, and wiring diagrams in alignment with project requirements and safety regulations.• Perform failure mode analysis, root cause investigations, and corrective actions for electrical subsystems and components.• Collaborate with cross-functional teams including mechanical, software, and systems engineers to integrate electrical components into full product solutions.• Validate designs through prototyping, testing, and documentation, ensuring compliance with relevant certifications and regulatory frameworks.<br>Required Skills & Qualifications:• Bachelor’s degree in Electrical Engineering or related field, or equivalent practical experience in electrical system design and development.• Minimum 3 years of hands-on experience designing and troubleshooting analog and digital circuits, power distribution, and embedded systems.• Proficiency with CAD tools such as Altium, KiCad, or similar for schematic capture and PCB layout.• Experience with simulation tools like SPICE, MATLAB, or Simulink for modeling and analysis of electrical systems.• Familiarity with industry standards including IEC, UL, and IPC for electrical safety, testing, and manufacturing.• Strong problem-solving skills with the ability to diagnose and resolve complex electrical issues under tight deadlines.• Experience working in Agile or structured engineering environments with version control systems like Git.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the engineering services industry, contributing to the development of next-generation electrical systems for diverse applications. The position supports a high-growth contract portfolio in energy, automation, and consumer electronics sectors.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Role: Electrical Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Contract Payout: $60 - $80/hour<br>Role Overview:We are hiring for one of our clients, seeking a contract Electrical Engineer to design, develop, and validate electrical systems for high-impact projects across multiple industries. The role involves end-to-end engineering execution from concept to deployment, ensuring compliance with industry standards and project specifications.<br>Key Responsibilities:• Design and simulate electrical circuits, power systems, and control systems using industry-standard tools and methodologies.• Develop and review electrical schematics, PCB layouts, and wiring diagrams in alignment with project requirements and safety regulations.• Perform failure mode analysis, root cause investigations, and corrective actions for electrical subsystems and components.• Collaborate with cross-functional teams including mechanical, software, and systems engineers to integrate electrical components into full product solutions.• Validate designs through prototyping, testing, and documentation, ensuring compliance with relevant certifications and regulatory frameworks.<br>Required Skills & Qualifications:• Bachelor’s degree in Electrical Engineering or related field, or equivalent practical experience in electrical system design and development.• Minimum 3 years of hands-on experience designing and troubleshooting analog and digital circuits, power distribution, and embedded systems.• Proficiency with CAD tools such as Altium, KiCad, or similar for schematic capture and PCB layout.• Experience with simulation tools like SPICE, MATLAB, or Simulink for modeling and analysis of electrical systems.• Familiarity with industry standards including IEC, UL, and IPC for electrical safety, testing, and manufacturing.• Strong problem-solving skills with the ability to diagnose and resolve complex electrical issues under tight deadlines.• Experience working in Agile or structured engineering environments with version control systems like Git.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the engineering services industry, contributing to the development of next-generation electrical systems for diverse applications. The position supports a high-growth contract portfolio in energy, automation, and consumer electronics sectors.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!