Heavy equipment mechanical engineer Jobs
19189 Jobs Found
Save and set alert for similar positionsManage alerts
<p>Key Responsibilities:</p><p>Duties</p><ul><li><p>Check, service, repair and maintain all TWMA equipment.</p></li><li><p>Inspect and assess the mechanical & hydraulic systems to determine the requirements for</p></li></ul><p>refurbishment, replacement, or repair.</p><ul><li><p>Repair or replace defective and/or worn parts and components.</p></li><li><p>Attend daily workshop or daily site briefings.</p></li><li><p>Generate accurate Engineer Inspection reports of assets and equipment.</p></li><li><p>Log and report information in the maintenance job sheets.</p></li></ul><p>Provide technical advice and assistance to all departments:</p><ul><li><p>Liaise with Engineering Department to obtain information to assist in the build of new equipment.</p></li><li><p>Liaise with other departments to promote suitable improvements to the process, assets, and</p></li></ul><p>equipment.</p><ul><li><p>Instruct site based operational staff on the correct use and operation of an asset.</p></li><li><p>Source information from third party representatives as necessary.</p></li></ul><p>HSEQ – ensure maintenance requirements are fully understood by:</p><ul><li><p>Follow all TWMA and HSE procedures.</p></li><li><p>Address any concerns and take appropriate actions in conjunction with TWMA procedures.</p></li><li><p>Attend monthly safety meetings with HSEQ personnel.</p></li></ul><p>Out of Hours Maintenance/Process Support Assistance:</p><ul><li><p>Provide back-up assistance to other TWMA personnel by mobile phone as required.</p></li><li><p>Offshore/Oversees Process Support – supporting offshore operations:</p></li><li><p>Travelling offshore to check, service & repair equipment as required.</p></li><li><p>Be prepared to undertake medicals, vaccinations and training as required for offshore travel.</p></li></ul><p>Offshore/Oversees Process Support – supporting offshore operations:</p><ul><li><p>Travelling offshore to check, service & repair equipment as required.</p></li><li><p>Be prepared to undertake medicals, vaccinations and training as required for offshore travel.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Qualifications / Training (E – Essential / P – Preferred):</p><ul><li><p>National Vocational Qualification (NVQ) in Mechanical related field or secondary qualification with</p></li></ul><p>equivalent trade experience of at least 3 years if relevant qualification is not available (E).</p><p>TWMA.</p><p>The world’s drilling waste specialist. Last Reviewed: 04/09/2024 MECHANICAL TECHNICIAN</p><ul><li><p>Diploma or bachelor’s degree in relevant Mechanical/ Hydraulic Engineering (P)</p></li><li><p>Basic Offshore Survival Induction & Emergency Training (BOSIET) (P) or ability to obtain certification</p></li></ul><p>if required to travel offshore.</p><p>Experience(s) (E – Essential / P – Preferred):</p><ul><li><p>Minimum 5 years work experience in a similar role within relevant field (E)</p></li><li><p>Working experience within the oil & gas or energy industries (P)</p></li><li><p>Preventive, predictive and corrective mechanical maintenance (E)</p></li><li><p>Servicing & maintaining mechanical & hydraulic equipment / machine (E)</p></li><li><p>Designing and building mechanical & hydraulic systems (P)</p></li><li><p>Working with process equipment/ heavy plant machinery (P)</p></li><li><p>Maintenance and overhauling of Centrifugal Pumps. (Single stage & multistage) (P)</p></li></ul><p>Knowledge / Skills / Competencies (E – Essential / P – Preferred):</p><ul><li><p>Good interpersonal and communication skills in English (Written and Verbal) (E)</p></li><li><p>Basic knowledge in MS office tools especially MS word and MS Excel (E)</p></li><li><p>Ability to work to a high standard at all times (E)</p></li><li><p>Ability to follow Operations and Maintenance Instructions (E)</p></li><li><p>Adaptable, flexible, and positive attitude towards change (E)</p></li><li><p>Good team player with the ability to work on own initiative (E)</p></li><li><p>Ability to work well with diverse culture and staff at all levels (E)</p></li><li><p>Keen attention to detail and ability to present information effectively in a precise and appropriate</p></li></ul><p>format (E)</p><ul><li><p>Dedicated to promoting a positive image of the company (E)</p></li><li><p>Physical ability to execute daily manual activities with optimal performance for prolonged working</p></li></ul><p>hours (E)</p><ul><li><p>Competent in applying defined systems of work (P)</p></li></ul><p>Complying with Procedures:</p><ul><li><p>Ensure compliance with the Company and Client operating policies and procedures.</p></li><li><p>Ensure compliance with the Company Health and Safety policy.</p></li><li><p>Be aware of company conditions of employment as detailed in the Employee Handbook.</p></li><li><p>Liaise with the HR Department to assure compliance with current employment law legislation and</p></li></ul><p>contract of employment.</p>
<b>About the Role </b><p>Looking for an experienced <strong>Senior Mechanical Engineer</strong> with a strong background in mechanical design, equipment engineering, and fabrication for industrial water treatment, desalination, and wastewater treatment projects.</p> <p>The ideal candidate will have hands-on experience in mechanical calculations, pressure vessel and tank design, piping systems, fabrication drawings, and equipment specifications. This role is suited to a design-oriented engineer who can independently handle mechanical engineering deliverables and coordinate with vendors, fabrication teams, and multidisciplinary project teams.</p> Key Responsibilities <ul> <li> <p>Perform mechanical design and engineering for water and wastewater treatment equipment and packaged systems.</p> </li> <li> <p>Prepare and review General Arrangement Drawings (GADs), fabrication drawings, mechanical datasheets, and equipment specifications.</p> </li> <li> <p>Design and review pressure vessels, storage tanks, filters, skid-mounted equipment, and piping systems.</p> </li> <li> <p>Perform mechanical calculations for vessels, tanks, supports, nozzles, pumps, and equipment foundations.</p> </li> <li> <p>Review piping layouts, isometrics, material specifications, and equipment interfaces.</p> </li> <li> <p>Coordinate fabrication activities, vendor drawings, welding documentation, inspections, FAT, and hydrotesting.</p> </li> <li> <p>Prepare material take-offs (MTOs), bills of materials (BOMs), and technical procurement documents.</p> </li> <li> <p>Support site installation, pre-commissioning, commissioning, and final documentation.</p> </li> </ul><b> Requirements </b><ul> <li> <p>Bachelor s degree in Mechanical Engineering.</p> </li> <li> <p>8 10+ years of relevant mechanical design and engineering experience, preferably in water treatment EPC projects.</p> </li> <li> <p>Strong knowledge of pressure vessel design, process piping, storage tanks, and industrial equipment fabrication.</p> </li> <li> <p>Familiarity with ASME Section VIII, ASME B31.3, API 650, AWWA, and relevant ASTM standards.</p> </li> <li> <p>Experience with GRP/FRP tanks and piping systems is highly desirable.</p> </li> <li> <p>Proficiency in AutoCAD and 3D engineering tools such as Plant 3D, SolidWorks, or equivalent.</p> </li> <li> <p>Strong understanding of welding, NDT, hydrotesting, material selection, and corrosion protection.</p> </li> </ul> Who Should Apply? <p>We are looking for a <strong>hands-on mechanical design engineer</strong>, not someone whose experience is limited to maintenance, site supervision, or CAD drafting.</p> <p>Experience with an EPC contractor, pressure vessel manufacturer, skid fabricator, or water treatment equipment OEM will be a strong advantage.</p>
<p><strong>Job Title: </strong>Mechanical Engineer</p><p><strong>Location: </strong>Fujairah</p><p><strong>Salary: </strong>Up to AED 5,500</p><p><strong>Job Code: </strong>132/001/594</p><p><strong>Industry: </strong>Cement Manufacturing</p><p><br></p><p><strong>Job Brief:</strong></p><p><span>Our client is seeking an experienced Mechanical </span> Engineer<span> for a white cement manufacturing plant in Fujairah.</span></p><p><br></p><p><span>The successful candidate will be responsible for supporting the operation, maintenance, and optimisation of mechanical equipment and machinery within the cement manufacturing plant. The role involves hands-on mechanical maintenance, monitoring plant equipment, troubleshooting mechanical issues, and ensuring smooth production operations with minimal downtime.</span></p><p><br></p><p><span>The ideal candidate should have </span><strong>3–5 years of mechanical maintenance experience in the cement manufacturing industry, with practical knowledge of raw mills, kilns, cement mills, conveyors, fans, and other cement plant equipment.</strong></p><p><br></p><p><strong>Job Responsibilities:</strong></p><ul><li>Conduct regular inspections and maintenance of mechanical equipment and machinery within the cement manufacturing plant.</li><li>Supervise and coordinate the work of mechanical technicians and fitters to ensure efficient maintenance operations.</li><li>Monitor and maintain mechanical equipment, including raw mills, kilns, cement mills, conveyors, and fans.</li><li>Participate in root cause analysis of mechanical failures and recommend appropriate corrective actions.</li><li>Contribute to the installation, commissioning, and modification of mechanical systems and equipment.</li><li>Carry out preventive and corrective maintenance activities to minimise equipment breakdowns and improve machinery reliability.</li><li>Perform daily maintenance job planning and identify opportunities to improve the quality and efficiency of maintenance activities.</li><li>Conduct hands-on mechanical troubleshooting to identify and resolve equipment-related issues.</li><li>Maintain accurate records of equipment performance, breakdowns, inspections, and maintenance activities.</li><li>Prepare daily reports on mechanical maintenance operations and submit them to the relevant senior engineer or manager.</li><li>Maintain equipment inspection checklists, lubrication records, and other maintenance documentation.</li><li>Monitor maintenance performance indicators, including equipment availability, Mean Time Between Failures (MTBF), and preventive maintenance compliance.</li></ul><p><br></p><p><strong>Job Requirements:</strong></p><ul><li><strong>Bachelor's Degree or Diploma in Mechanical Engineering is required.</strong></li><li><strong>3–5 years of relevant mechanical maintenance experience in the cement manufacturing industry.</strong></li><li><strong>Practical maintenance knowledge of cement plant equipment, including raw mills, kilns, cement mills, conveyors, and fans.</strong></li><li>Hands-on experience in mechanical troubleshooting, preventive maintenance, and corrective maintenance.</li><li>Experience supervising or coordinating mechanical technicians and fitters.</li><li>Understanding of ISO 9001 quality management standards.</li><li>Proficiency in Microsoft Excel, Word, and PowerPoint.</li><li>Familiarity with SAP or other ERP systems.</li><li>Good written and verbal communication skills for coordination with internal and external stakeholders.</li><li>Strong planning, organisational, and time management skills.</li><li>Ability to work effectively with maintenance and production teams to support uninterrupted cement plant operations.</li></ul><p><br></p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Mechanical Technician - CICPA The role involves the inspection, servicing, troubleshooting, repair and maintenance of construction machinery, diesel engines and mechanical equipment to ensure equipment reliability, safety and readiness for deployment to customer sites.</p><p><br></p><p>Role & Responsibilities</p><p>Carry out preventive and corrective maintenance of construction equipment and machinery.</p><p>Inspect equipment to identify mechanical faults, wear, damage and potential breakdowns.</p><p>Diagnose and troubleshoot mechanical problems in heavy equipment and diesel-powered machinery.</p><p>Perform servicing, repair, dismantling and reassembly of engines and mechanical components.</p><p>Carry out routine maintenance and servicing of diesel engines, generators, pumps and construction equipment.</p><p>Inspect and maintain mechanical components including transmissions, gearboxes, drive systems, cooling systems and braking systems.</p><p>Assist with major repairs, engine overhauls and equipment refurbishment.</p><p>Carry out equipment inspections before and after rental deployment.</p><p>Ensure machinery is mechanically fit, safe and ready for delivery to customer sites.</p><p>Respond to equipment breakdowns and carry out on-site troubleshooting and repairs when required.</p><p>Maintain proper records of inspections, servicing, repairs and replacement of components.</p><p>Coordinate with workshop supervisors and operations teams regarding equipment availability and repair requirements.</p><p>Follow manufacturer maintenance procedures and recommended service intervals.</p><p>Maintain workshop tools, equipment and work areas in safe and operational condition.</p><p>Comply with company HSE procedures and customer/site safety requirements.</p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Required Qualifications</p><p>ITI, Diploma or Technical Certificate in Mechanical Engineering / Mechanical Trade or equivalent.</p><p>Minimum 1–5 years of hands-on experience as a Mechanical Technician / Heavy Equipment Mechanic.</p><p>Previous experience working on CICPA-controlled sites/projects is preferred.</p><p>Strong experience in construction equipment and diesel engine maintenance.</p><p>Experience with equipment such as excavators, loaders, forklifts, generators, compressors, cranes, telehandlers, rollers or other heavy machinery will be an advantage.</p><p>Experience in construction equipment rental, heavy equipment maintenance, construction or industrial machinery is preferred.</p><p>Good knowledge of mechanical troubleshooting, servicing and preventive maintenance.</p><p>Experience with hydraulic systems and basic electrical troubleshooting will be an advantage.</p><p>UAE/GCC experience will be an advantage.</p><p>Ability to work in a workshop as well as at customer/project sites.</p><p><br></p><p>Key Skills</p><p>Heavy equipment maintenance</p><p>Construction machinery servicing</p><p>Diesel engine maintenance</p><p>Mechanical troubleshooting</p><p>Preventive and corrective maintenance</p><p>Hydraulic systems</p><p>Engines and powertrain systems</p><p>Gearboxes and transmission systems</p><p>Equipment inspection</p><p>Engine overhaul and repair</p><p>Breakdown maintenance</p><p>Workshop maintenance</p><p>On-site equipment repair</p><p>Equipment rental operations</p><p>HSE compliance</p><p>Language Skills</p><p>Basic to intermediate English communication skills.</p><p>Ability to understand technical instructions, equipment manuals and safety procedures.</p><p><br></p><p>Language Skills</p><p>Fluent at English (written and spoken)</p><p>Arabic or 2nd Languages will be considered a plus</p><p><br></p><p>Other Details:</p><p>Working days and hours : Monday to Saturday (9 hrs/day) 8:30 until 17:30 (Flexible for Overtime (OT) on Sunday)</p><p>Location:Candidate should be currently in Dubai, UAE or willing to relocate while being in within UAE.</p><p>Benefits: Overtime (OT) Pay, Company-Provided Accommodation, and Transportation.</p></div>
<ul><li><p>Mechanical Engineer</p><p><strong>Position:</strong> Mechanical Engineer<br><strong>Employment Type:</strong> Full-Time<br><strong>Location:</strong> Dubai, UAE</p><p>Job Summary</p><p>We are looking for a skilled and motivated <strong>Mechanical Engineer</strong> to join our team. The successful candidate will be responsible for planning, designing, supervising, and maintaining mechanical systems and equipment while ensuring compliance with safety, quality, and industry standards.</p><p>Key Responsibilities</p><ul><li><p>Design, develop, and oversee mechanical systems, equipment, and components.</p></li><li><p>Prepare technical drawings, specifications, calculations, and engineering reports.</p></li><li><p>Inspect, test, troubleshoot, and maintain mechanical equipment and systems.</p></li><li><p>Coordinate with electrical, civil, and other engineering teams on projects.</p></li><li><p>Monitor project progress, quality, costs, and timelines.</p></li><li><p>Identify mechanical problems and provide effective technical solutions.</p></li><li><p>Ensure all work complies with UAE regulations, safety requirements, and engineering standards.</p></li><li><p>Conduct regular inspections and recommend preventive maintenance.</p></li><li><p>Coordinate with contractors, suppliers, and clients when required.</p></li><li><p>Maintain accurate technical documentation and project records.</p></li></ul><p>Requirements</p><ul><li><p>Bachelor's degree in <strong>Mechanical Engineering</strong> or a related field.</p></li><li><p>Relevant professional experience in mechanical engineering.</p></li><li><p>Strong knowledge of mechanical systems, equipment, and engineering principles.</p></li><li><p>Proficiency in <strong>AutoCAD</strong> and relevant engineering/design software.</p></li><li><p>Good analytical, problem-solving, and project-management skills.</p></li><li><p>Strong communication and teamwork abilities.</p></li><li><p>Ability to work independently and meet deadlines.</p></li><li><p>Knowledge of UAE engineering and safety standards is an advantage.</p></li></ul><p>Preferred Skills</p><ul><li><p>HVAC and MEP knowledge.</p></li><li><p>Preventive and corrective maintenance experience.</p></li><li><p>Project coordination and site supervision.</p></li><li><p>Technical report preparation.</p></li><li><p>Knowledge of industry codes and standards.</p></li></ul><p>What We Offer</p><ul><li><p>Competitive salary package.</p></li><li><p>Professional and supportive working environment.</p></li><li><p>Career development opportunities.</p></li><li><p>Opportunity to wor</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's or Master's degree in Mechanical Engineering or a closely related field.</li><li>Minimum of 5 years of relevant industry experience in mechanical design, manufacturing, or maintenance.</li><li>Professional Engineer (PE) license or relevant industry certifications (e.g., CWI, ASME) are highly desirable.</li><li>Proven ability to effectively instruct and engage diverse student populations, from apprentices to experienced professionals.</li></ul>
<ul><li>Lead Procurement Engineer (Mega Oil & Gas Projects) Location: Abu Dhabi, UAE | Employment Type: Full-Time | Industry: Oil & Gas, Gas Processing, Projects About the Role We are seeking a highly experienced Lead Procurement Engineer to lead procurement, expediting and logistics activities for large-scale Oil & Gas projects. The successful candidate will provide procurement leadership across the project lifecycle – from procurement planning, material requisitions and bid evaluation through purchase order award, vendor document follow-up, manufacturing, inspection, shipping, customs clearance and delivery to site. The role will focus on securing long-lead and critical equipment, packaged units and bulk materials on time, to specification and within budget, working closely with EPC Contractors, PMC teams, vendors, Engineering, Construction and Project Controls. Key Responsibilities Procurement Leadership & Strategy Lead all procurement, expediting and logistics activities for major EPC and greenfield/brownfield projects.</li><li>Develop and review procurement plans, strategies and long-lead item plans aligned with the project schedule.</li><li>Monitor EPC Contractor procurement performance and ensure compliance with Company procedures, approved vendor lists, In-Country Value (ICV) requirements and contract terms.</li><li>Identify procurement risks early and drive mitigation and recovery plans for critical-path items.</li><li>Sourcing, Bid Evaluation & Purchase Orders Review Material Requisitions (MRs), enquiry packages and bidder lists for completeness and compliance.</li><li>Lead or review technical and commercial bid evaluations, clarification meetings and negotiations, and recommend awards.</li><li>Review purchase orders, change orders and variations, and track PO placement against the procurement schedule.</li><li>Expediting & Manufacturing Follow-up Expedite vendor and sub-vendor orders, vendor document submissions and review cycles.</li><li>Monitor manufacturing progress against key milestones, identify slippages and agree recovery actions with vendors.</li><li>Coordinate Inspection & Test Plans, pre-inspection meetings, Factory Acceptance Tests (FAT) and release notes with QA/QC and inspection teams.</li><li>Logistics & Material Management Plan and oversee logistics for equipment and bulk materials, including packing and marking, sea/air/land freight, heavy-lift and out-of-gauge (OOG) cargo, Incoterms and route surveys.</li><li>Manage customs clearance, import permits and port coordination in the UAE.</li><li>Track ETA against Required-On-Site (ROS) dates and resolve delivery conflicts with Construction.</li><li>Oversee material receiving, OS&D reporting, preservation, warehousing, laydown areas and spare parts handover.</li><li>Reporting & Interfaces Prepare weekly and monthly procurement and logistics reports, KPIs and dashboards.</li><li>Maintain procurement status trackers and escalate critical items, delays and risks to management.</li><li>Interface with Engineering, Construction, Commissioning, Project Controls, Contracts, QA/QC and Finance teams.</li><li>Team Leadership Lead, mentor and manage Procurement, Expediting and Logistics Engineers.</li><li>Review and approve deliverables prepared by the team, and provide coaching and competency development.</li><li>Ensure quality, integrity, schedule compliance and effective resource utilisation.</li><li>Qualifications Bachelor's Degree in Mechanical, Electrical, Chemical, Industrial or a relevant Engineering discipline from an accredited university.</li><li>Master's Degree or a Supply Chain qualification is considered an advantage.</li><li>Professional certification such as CIPS, CPSM, CSCP or PMP is preferred.</li><li>Experience Requirements Minimum 15 years of relevant experience in Oil & Gas, Gas Processing, LNG, Refining or Petrochemical projects.</li><li>Minimum 5 years in a Lead Procurement Engineer or equivalent leadership role on mega projects.</li><li>Proven hands-on experience as a Procurement Engineer and as a Logistics Engineer in Owner, PMC or EPC environments.</li><li>Strong track record in procuring long-lead and critical equipment (compressors, pumps, heat exchangers, columns and vessels, electrical and instrumentation packages) and bulk materials.</li><li>Experience managing heavy-lift/OOG shipments, freight forwarding and customs clearance in the UAE/GCC.</li><li>Previous experience with ADNOC or on ADNOC projects is highly desirable.</li><li>Technical Competencies Procurement & Supply Chain: Procurement planning, long-lead items, RFQ/ITB, technical and commercial bid evaluation, negotiation, PO administration, Incoterms 2020, vendor and sub-vendor management, ICV</li><li>Expediting & Inspection: Vendor document management, manufacturing surveillance, inspection and FAT coordination</li><li>Logistics: Freight forwarding, heavy-lift and OOG transport, customs and import regulations, port operations, warehousing and preservation</li><li>Systems & Tools: SAP / SAP Ariba or Oracle, materials management systems (e.g. Hexagon Smart Materials), Primavera P6 (schedule interface), advanced Excel / Power BI</li><li>Behavioural Competencies Strong leadership and people management skills.</li><li>Excellent negotiation, communication and stakeholder management abilities.</li><li>Strong analytical and problem-solving skills with a proactive, risk-based approach.</li><li>High integrity and commitment to ethical procurement practices.</li><li>Ability to work effectively in multidisciplinary and multicultural environments.</li><li>Results-oriented with a strong focus on quality, safety and on-time delivery.</li><li>Here's the English job description on its own, ready to paste into LinkedIn:</li><li>Lead Procurement Engineer (Mega Oil & Gas Projects)Location: Abu Dhabi, UAE | Employment Type: Full-Time | Industry: Oil & Gas, Gas Processing, Projects About the Role We are seeking a highly experienced Lead Procurement Engineer to lead procurement, expediting and logistics activities for large-scale Oil & Gas projects. The successful candidate will provide procurement leadership across the project lifecycle – from procurement planning, material requisitions and bid evaluation through purchase order award, vendor document follow-up, manufacturing, inspection, shipping, customs clearance and delivery to site. The role will focus on securing long-lead and critical equipment, packaged units and bulk materials on time, to specification and within budget, working closely with EPC Contractors, PMC teams, vendors, Engineering, Construction and Project Controls. Key Responsibilities Procurement Leadership & Strategy Lead all procurement, expediting and logistics activities for major EPC and greenfield/brownfield projects.</li><li>Develop and review procurement plans, strategies and long-lead item plans aligned with the project schedule.</li><li>Monitor EPC Contractor procurement performance and ensure compliance with Company procedures, approved vendor lists, In-Country Value (ICV) requirements and contract terms.</li><li>Identify procurement risks early and drive mitigation and recovery plans for critical-path items.</li><li>Sourcing, Bid Evaluation & Purchase Orders Review Material Requisitions (MRs), enquiry packages and bidder lists for completeness and compliance.</li><li>Lead or review technical and commercial bid evaluations, clarification meetings and negotiations, and recommend awards.</li><li>Review purchase orders, change orders and variations, and track PO placement against the procurement schedule.</li><li>Expediting & Manufacturing Follow-up Expedite vendor and sub-vendor orders, vendor document submissions and review cycles.</li><li>Monitor manufacturing progress against key milestones, identify slippages and agree recovery actions with vendors.</li><li>Coordinate Inspection & Test Plans, pre-inspection meetings, Factory Acceptance Tests (FAT) and release notes with QA/QC and inspection teams.</li><li>Logistics & Material Management Plan and oversee logistics for equipment and bulk materials, including packing and marking, sea/air/land freight, heavy-lift and out-of-gauge (OOG) cargo, Incoterms and route surveys.</li><li>Manage customs clearance, import permits and port coordination in the UAE.</li><li>Track ETA against Required-On-Site (ROS) dates and resolve delivery conflicts with Construction.</li><li>Oversee material receiving, OS&D reporting, preservation, warehousing, laydown areas and spare parts handover.</li><li>Reporting & Interfaces Prepare weekly and monthly procurement and logistics reports, KPIs and dashboards.</li><li>Maintain procurement status trackers and escalate critical items, delays and risks to management.</li><li>Interface with Engineering, Construction, Commissioning, Project Controls, Contracts, QA/QC and Finance teams.</li><li>Team Leadership Lead, mentor and manage Procurement, Expediting and Logistics Engineers.</li><li>Review and approve deliverables prepared by the team, and provide coaching and competency development.</li><li>Ensure quality, integrity, schedule compliance and effective resource utilisation.</li><li>Qualifications Bachelor's Degree in Mechanical, Electrical, Chemical, Industrial or a relevant Engineering discipline from an accredited university.</li><li>Master's Degree or a Supply Chain qualification is considered an advantage.</li><li>Professional certification such as CIPS, CPSM, CSCP or PMP is preferred.</li><li>Experience Requirements Minimum 15 years of relevant experience in Oil & Gas, Gas Processing, LNG, Refining or Petrochemical projects.</li><li>Minimum 5 years in a Lead Procurement Engineer or equivalent leadership role on mega projects.</li><li>Proven hands-on experience as a Procurement Engineer and as a Logistics Engineer in Owner, PMC or EPC environments.</li><li>Strong track record in procuring long-lead and critical equipment (compressors, pumps, heat exchangers, columns and vessels, electrical and instrumentation packages) and bulk materials.</li><li>Experience managing heavy-lift/OOG shipments, freight forwarding and customs clearance in the UAE/GCC.</li><li>Previous experience with ADNOC or on ADNOC projects is highly desirable.</li><li>Technical Competencies Procurement & Supply Chain: Procurement planning, long-lead items, RFQ/ITB, technical and commercial bid evaluation, negotiation, PO administration, Incoterms 2020, vendor and sub-vendor management, ICV</li><li>Logistics: Freight forwarding, heavy-lift and OOG transport, customs and import regulations, port operations, warehousing and preservation</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Job Title: Specialist Lifting Operation Engineer<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u> Job Title: </u></b><b><u>Specialist Lifting Operation Engineer</u></b></p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Client or Contractors Office in Abu Dhabi.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The Specialist Lifting Operations Engineer shall be responsible for planning, engineering, coordinating, and supervising all lifting and rigging activities associated with the ADNOC Offshore LTDP Package 4 project. The role ensures that all lifting operations are executed safely, efficiently, and in compliance with ADNOC Offshore standards, project specifications, international lifting regulations, and HSE requirements.</p><br><br>Key ResponsibilitiesLifting Engineering & Planning<ul><li>Prepare, review, and approve lifting studies and lifting plans for routine and critical lifts.</li><li>Develop lift methodologies for offshore modules, structures, piping spools, equipment, and heavy packages.</li><li>Verify crane capacities, load calculations, lift radii, ground bearing pressures, and rigging configurations.</li><li>Conduct engineering assessments for complex and non-routine lifting operations.</li><li>Review contractor lifting procedures and ensure compliance with ADNOC Offshore requirements.</li></ul>Offshore Construction Support<ul><li>Provide lifting engineering support during fabrication, transportation, installation, commissioning, and hook-up activities.</li><li>Coordinate lifting activities with construction, marine, commissioning, and operations teams.</li><li>Participate in SIMOPS planning and risk assessments for offshore lifting activities.</li><li>Ensure lifting operations are executed according to approved procedures and project requirements.</li></ul>Safety & Compliance<ul><li>Ensure compliance with ADNOC Offshore HSE policies and lifting standards.</li><li>Participate in HAZID, HAZOP, Job Safety Analysis (JSA), Task Risk Assessment (TRA), and Toolbox Talks.</li><li>Monitor lifting operations to ensure adherence to safe lifting practices.</li><li>Identify lifting hazards and develop mitigation measures.</li><li>Participate in incident investigations and recommend corrective actions.</li></ul>Rigging & Equipment Management<ul><li>Review and approve selection of cranes, lifting appliances, lifting gears, spreader beams, shackles, slings, and other rigging equipment.</li><li>Ensure lifting equipment certifications are current and compliant with ADNOC and international standards.</li><li>Verify inspection records and maintenance status of cranes and lifting equipment.</li><li>Assess suitability of lifting equipment for offshore environmental conditions.</li></ul>Coordination & Stakeholder Management<ul><li>Liaise with ADNOC Offshore representatives, project management teams, contractors, and vendors.</li><li>Support lifting-related technical queries during engineering and construction phases.</li><li>Participate in project review meetings and provide technical recommendations for lifting operations.</li><li>Coordinate with marine and logistics teams for transport and installation campaigns.</li></ul>Documentation & Reporting<ul><li>Prepare lifting studies, load calculations, rigging drawings, and critical lift packages.</li><li>Maintain lifting registers, certification records, and compliance documentation.</li><li>Submit lifting operation reports and lessons learned documentation.</li><li>Support project close-out and handover documentation requirements.</li></ul><br>Qualifications<ul><li>Bachelor's Degree in Mechanical Engineering or related Engineering discipline.</li><li>LEEA (Lifting Equipment Engineers Association) certification preferred.</li><li>Appointed Person for Lifting Operations certification preferred.</li><li>Additional lifting and rigging certifications will be advantageous.</li></ul><br>Experience<ul><li>Minimum 12-15 years of oil and gas industry experience.</li><li>Minimum 8 years of experience in lifting engineering and heavy lifting operations.</li><li>Strong experience in offshore EPC, brownfield, hook-up, commissioning, and construction projects.</li><li>Previous ADNOC Offshore, Zakum, Umm Lulu, NASR, SARB, or similar offshore experience preferred.</li><li>Experience with critical lifts, module installations, and heavy equipment handling.</li><li>Familiarity with offshore vessel crane operations and marine lifting activities.</li></ul><br><br><br> </div>
We are looking for an experienced Purchaser to join our heavy equipment company in the UAE, Abu Dhabi. Requirements:Minimum 3 years of experience as a Purchaser in the UAE, ideally in heavy equipment, construction machinery, or a related industrial sector Strong knowledge of the UAE supplier and vendor market for heavy machinery and spare parts Excellent negotiation and vendor management skills Valid UAE driving license preferred Must currently reside in the UAE and be able to join immediately or on short notice Responsibilities:Source, negotiate, and purchase heavy equipment, spare parts, tools, and consumables Maintain strong relationships with suppliers and dealers to secure the best pricing and delivery terms Issue purchase orders and track deliveries Monitor stock levels with the operations/warehouse team Compare quotations and identify cost-saving opportunities Maintain accurate purchasing records and reports Interested candidates, please send your CV to hr@smakagt.ae#Hiring #UAEJobs #Procurement #Heavy Equipment #Purchaser
<p>Ensure that the quarry operates successfully. Oversee all operations, both on site and in the office, manage staff, coordinate production, and monitor all site systems.</p><br><p><strong><u>Responsibilities & Duties:</u></strong></p><ul><li><p>Knowledge of Quarry operation, Blasting, development for quarry and how to do extraction. Earth moving equipment and processing plant experience.</p></li><li><p>Checking that the quarry's production levels are maintained safely to schedule.</p></li><li><p>Balancing sales and output.</p></li><li><p>Altering the quarry's production system in accordance with the materials required.</p></li><li><p>Liaising with sales and commercial teams.</p></li><li><p>Performance managing the production process and setting and monitoring targets.</p></li><li><p>Providing the company with information and statistics on the quarry's performance.</p></li><li><p>Managing and regulating the quarry's budget.</p></li><li><p>Maintaining up-to-date records and dealing with a range of paperwork.</p></li><li><p>Ensuring that key health and safety policies are implemented throughout the site.</p></li><li><p>Closely monitoring all areas of the quarry to ensure that extraction and processing work is carried out to the highest standard.</p></li><li><p>Liaising with staff on site and dealing with any technical or staffing challenges that arise.</p></li><li><p>Undertaking regular site inspections and risk assessments in order to comply with all Health and safety Regulations.</p></li><li><p>Examining the materials produced to ensure that a high quality of product is maintained.</p></li><li><p>Assessing equipment and production materials levels</p></li><li><p>Ordering new items as required.</p></li><li><p>Checking that all vehicles on site are maintained to a good standard</p></li><li><p>Coordinate with Mining Engineer to assure output from the resources</p></li><li><p>Financial Management Implication.</p></li><li><p>Attending weekly Operations, Financial and Logistics meetings and delivering feedback to the CEO while keeping him up to date on any items requiring his attention.</p></li><li><p>Costing calculations and budgeting to ensure that the company is not running at a loss and that the yearly and quarterly budgets are not overspent.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Experience - Minimum 6-8 years of required (KPIs) and Performance Expectations</p></li><li><p>Qualification - Bachelor Degree of Engineering (Mechanical, Electrical Geological and Mining)</p></li><li><p>A strong level of technical understanding of quarrying environments and extraction systems</p></li><li><p>Strong customer service skills</p></li><li><p>Good business and management skills</p></li><li><p>Project-management skills</p></li></ul>
<ul><li><p>Report directly to the assigned Mechanical QC Engineer and support the implementation of quality control procedures for mechanical (Rotating/Static Equipments) works.</p></li><li><p>Review project technical specifications, drawings, and BOQ to identify quality requirements, engineering criteria, and inspection requirements related to mechanical works.</p></li><li><p>Participate in site receiving inspections of mechanical materials and equipment to verify compliance with project specifications and approved documentation.</p></li><li><p>Perform fit-up inspections and final dimensional verification prior to installation and welding activities.</p></li><li><p>Prepare, file, maintain, and retrieve inspection reports, test records, and quality documentation generated from inspection activities.</p></li><li><p>Attend and support client inspections and testing activities within the assigned area of responsibility.</p></li><li><p>Prepare punch lists for completed mechanical works and follow up until all items are satisfactorily closed.</p></li><li><p>Assist construction personnel in identifying quality issues, potential problems, and non-conformances related to mechanical works.</p></li><li><p>Report and escalate non-conforming work to the Mechanical QC Engineer and/or QC Manager for further action.</p></li><li><p>Ensure that all measuring and testing instruments used for inspection activities are properly calibrated and functional.</p></li><li><p>Perform additional related duties as assigned by the QC Engineer or QC Manager.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor Degree/ Diploma in Mechanical Engineering</p></li><li><p>Minimum 5 years’ experience as <strong>QC Rotating/ Static Equipment Inspector</strong> in oil and gas projects</p></li><li><p>Hands- on experience in Inspection of piping, static equipment, rotating equipment, valves and associated mechanical systems.</p></li></ul><br><p><strong>Note: </strong>Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Mechanical Engineer in Abu Dhabi, UAE</b>. Our client is a reputed organization in the <b>Oil & Gas sector</b> seeking skilled, motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br><p><b>Key Responsibilities</b><br></p><br><ul><li>Inspect, maintain, and troubleshoot mechanical equipment used in oil & gas operations.<br></li><li>Review mechanical drawings, specifications, equipment data sheets, and technical documentation.<br></li><li>Support installation, commissioning, maintenance, and repair of mechanical systems.<br></li><li>Diagnose mechanical equipment faults and recommend appropriate corrective actions.<br></li><li>Coordinate with operations, maintenance, engineering, and HSE teams during field activities.<br></li><li>Ensure mechanical work complies with applicable engineering standards and site safety requirements.<br></li><li>Monitor equipment condition and contribute to preventive and corrective maintenance activities.<br></li><li>Prepare technical reports, maintenance records, inspection findings, and engineering documentation.<br></li></ul><p><b>Required Skills</b><br></p><br><ul><li><b>Mechanical Engineering:</b> Strong understanding of mechanical engineering fundamentals relevant to industrial equipment.<br></li><li><b>Oil & Gas Equipment:</b> Knowledge of pumps, compressors, piping systems, valves, and associated equipment.<br></li><li><b>Maintenance Engineering:</b> Understanding of preventive and corrective maintenance practices.<br></li><li><b>Technical Troubleshooting:</b> Ability to identify mechanical faults and determine appropriate corrective action.<br></li><li><b>Engineering Drawings & Safety:</b> Ability to interpret drawings and work within industrial HSE requirements.<br></li></ul><p><b>Preferred Skills</b><br></p><br><ul><li>Exposure to oil & gas plant or field operations.<br></li><li>Knowledge of rotating and static equipment.<br></li><li>Familiarity with preventive maintenance and equipment reliability practices.<br></li></ul><p><b>Work Experience Requirements:</b> Experience was not specified in the provided requirement. A <b>typical</b> Mechanical Engineer position in oil & gas may require prior mechanical engineering experience in industrial, plant, maintenance, construction, or oil & gas environments; the exact requirement should be confirmed with the client.<br></p><br><p><b>Education:</b> Minimum: Typical B.E./B.Tech in Mechanical Engineering • Preferred: Relevant postgraduate qualification or industry certification • Additional: Oil & gas/HSE-related certifications may be advantageous.<br></p><br>Contact Number - 97868 88866 <br><br><br> </div>
<strong>Company Description</strong> Science Mechanical is an industrial services company specializing in the installation, maintenance, and repair of tower cranes and related lifting equipment. Based in Abu Dhabi, the company supports construction and infrastructure projects with reliable, safety-focused mechanical services. Science Mechanical emphasizes technical excellence, adherence to international safety standards, and efficient project delivery. Team members work in a hands-on environment with modern equipment and have opportunities to develop specialized skills in heavy lifting and crane technology.<br><strong>Role Description</strong> The Tower Crane Technician is a full-time, on-site role based in Abu Dhabi, responsible for the inspection, installation, maintenance, and repair of tower cranes and associated lifting systems. Day-to-day tasks include performing routine and preventive maintenance, diagnosing mechanical, electrical, and hydraulic faults, and carrying out corrective repairs to ensure safe and reliable crane operations. The technician will conduct safety checks, assist in erection and dismantling of tower cranes, and document work performed in service reports. The role involves working closely with site teams and supervisors, responding to field service calls, and following all company and regulatory safety procedures.<br><strong>Qualifications<br></strong> <br><ul><li>Strong knowledge of lifting equipment and tower crane systems, including safe operation and load handling.</li><li>Proficiency in troubleshooting mechanical, electrical, and hydraulic issues on heavy equipment.</li><li>Experience in field service work, including on-site diagnostics and repairs in construction or industrial environments.</li><li>Hands-on equipment maintenance skills, including preventive and corrective maintenance for heavy equipment.</li><li>Relevant technical diploma or certification in mechanical, electrical, or mechatronics engineering (or equivalent practical experience).</li><li>Understanding of safety regulations and standards related to crane operations and lifting equipment.</li><li>Ability to read technical manuals, drawings, and schematics; basic computer skills for service reporting.</li><li>Physical ability to work at heights and in outdoor conditions; willingness to work flexible hours as needed.</li><li>Previous experience as a crane technician or in heavy equipment maintenance is highly beneficial.</li></ul>
<ol><li><p>Perform regular servicing, inspection and preventive maintenance of heavy equipment and vehicles.</p></li><li><p>Diagnose and repair <strong>diesel engines, hydraulic systems, transmissions, brakes and other mechanical components</strong>.</p></li><li><p>Carry out engine servicing, repairs and overhauling when required.</p></li><li><p>Troubleshoot and attend to machinery breakdowns at the workshop or site.</p></li><li><p>Maintain and repair <strong>JCBs, loaders, excavators, cranes, trucks and other heavy equipment</strong>.</p></li><li><p>Identify mechanical faults and recommend necessary repairs or replacement of parts.</p></li><li><p>Perform oil changes, filter replacement, lubrication and other scheduled maintenance.</p></li><li><p>Coordinate with machine operators to understand equipment problems.</p></li><li><p>Maintain records of servicing, repairs, breakdowns and spare parts used.</p></li><li><p>Ensure all machinery is kept in safe and reliable working condition.</p></li><li><p>Follow proper workshop safety procedures and maintain tools and equipment.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>Minimum 2 years of hands-on experience as a Diesel / Heavy Equipment Mechanic.</strong></p></li><li><p>Experience working with <strong>heavy machinery and construction equipment</strong> is preferred.</p></li><li><p>Strong practical knowledge of <strong>diesel engines and hydraulic systems</strong>.</p></li><li><p>Experience with <strong>JCB, loaders, excavators, cranes, trucks or similar equipment</strong> is an advantage.</p></li><li><p>Ability to independently diagnose and repair mechanical faults.</p></li><li><p>ITI / Diploma in <strong>Diesel Mechanics, Mechanical Engineering, Automobile Engineering or related field</strong> preferred.</p></li><li><p>UAE experience is preferred.</p></li><li><p>Ability to respond to urgent machinery breakdowns.</p></li><li><p><strong>UAE driving licence is an advantage.</strong></p></li><li><p>Candidates who can join immediately are preferred.</p></li></ol>
We’re Hiring: Technician - Base Maintenance<p> <strong>Employment Type:</strong> Full-Time</p><p> <strong>Level:</strong> Entry-Level to Mid-Level</p><p>We are seeking a technically skilled, safety-conscious, and detail-oriented <strong>Technician - Base Maintenance</strong> to support aircraft maintenance, inspection, troubleshooting, repair, and servicing activities within a base-maintenance environment. The role will work closely with licensed engineers, maintenance teams, quality personnel, and other technical departments to ensure aircraft and components are maintained safely and in accordance with approved maintenance procedures and aviation regulations.</p><p> <strong>Key Responsibilities</strong></p><p><strong>• Perform scheduled and unscheduled aircraft maintenance tasks under approved maintenance procedures and supervision where required.</strong></p><p><strong>• Conduct inspections, servicing, repairs, replacement, and troubleshooting of aircraft systems and components.</strong></p><p><strong>• Assist with base maintenance, heavy checks, modifications, defect rectification, and aircraft maintenance programs</strong>.</p><p>• Read and interpret Aircraft Maintenance Manuals (AMM), Structural Repair Manuals (SRM), Illustrated Parts Catalogues (IPC), wiring diagrams, and technical documentation.</p><p>• Perform maintenance tasks in accordance with approved work instructions, engineering orders, and maintenance procedures.</p><p>• Troubleshoot mechanical, electrical, hydraulic, pneumatic, structural, and other aircraft-related systems as assigned.</p><p>• Remove, install, inspect, and replace aircraft components and parts using approved tools and equipment.</p><p>• Conduct functional checks and operational tests following maintenance activities.</p><p>• Record completed maintenance tasks, inspection results, defects, and corrective actions accurately.</p><p>• Ensure all maintenance documentation and technical records are completed in accordance with company procedures and regulatory requirements.</p><p>• Support licensed Aircraft Maintenance Engineers during inspections, troubleshooting, repairs, and certification activities.</p><p>• Identify aircraft defects, abnormalities, damage, and potential safety concerns and report them promptly.</p><p>• Maintain aircraft maintenance tools, ground-support equipment, and work areas in safe and serviceable condition.</p><p>• Perform tool control, equipment checks, and calibration verification as required.</p><p>• Follow approved procedures for aircraft component handling, storage, installation, and removal.</p><p>• Maintain strict compliance with aviation safety, quality, and environmental procedures.</p><p>• Participate in aircraft inspections, defect investigations, modification programs, and maintenance improvement activities.</p><p>• Coordinate with Planning, Engineering, Quality Assurance, Stores, and other maintenance teams to support timely aircraft release.</p><p>• Assist with aircraft recovery, troubleshooting, and rectification of technical defects when required.</p><p>• Ensure all work is performed with appropriate attention to <strong>human factors, FOD prevention, safety, and maintenance best practices</strong>.</p><p>• Participate in continuous improvement initiatives aimed at improving maintenance reliability, turnaround time, safety, and operational efficiency.</p><p>✅ <strong>Requirements</strong></p><p><strong>• Previous experience in Aircraft Maintenance, Base Maintenance, Line Maintenance, Aviation Engineering, or a related technical field</strong> is preferred.</p><p>• Technical knowledge of aircraft mechanical, electrical, hydraulic, pneumatic, structural, or avionics systems.</p><p>• Experience working in an aircraft maintenance, MRO, airline, or aviation engineering environment is an advantage.</p><p>• Ability to read and understand aircraft maintenance manuals, technical drawings, wiring diagrams, and engineering documentation.</p><p>• Knowledge of aircraft maintenance practices, inspection procedures, component replacement, and defect rectification.</p><p>• Strong understanding of aviation safety, quality standards, and maintenance procedures.</p><p>• Familiarity with <strong>AMM, SRM, IPC, MEL, CDL, engineering orders, and maintenance task cards</strong> is an advantage.</p><p>• Ability to use aircraft maintenance tools, test equipment, ground-support equipment, and workshop machinery safely.</p><p>• Strong troubleshooting and problem-solving skills.</p><p>• Excellent attention to detail and ability to follow technical procedures precisely.</p><p>• Strong documentation and record-keeping skills.</p><p>• Ability to work effectively with Licensed Aircraft Engineers, technicians, inspectors, planners, and other maintenance personnel.</p><p>• Strong commitment to safety, quality, compliance, and professional standards.</p><p>• Ability to work shifts, weekends, public holidays, and overtime according to aircraft maintenance schedules.</p><p>• Physically capable of working in aircraft hangars, maintenance areas, and other demanding environments.</p><p>• Relevant aviation maintenance training, technical certification, or aircraft maintenance qualification is preferred.</p><p>• A <strong>CAAM Aircraft Maintenance Licence (AML)</strong> or relevant authorization is an advantage depending on the position and aircraft type.</p><p>• Experience with specific aircraft types such as <strong>Airbus, Boeing, ATR, Embraer, or other commercial aircraft</strong> is an advantage.</p><p>• Diploma or technical qualification in <strong>Aircraft Maintenance, Aeronautical Engineering, Mechanical Engineering, Electrical Engineering, Avionics, or a related discipline</strong> is preferred.</p><p> <strong>What We Offer</strong></p><p><strong>• Opportunity to gain hands-on experience in Aircraft Base Maintenance, Heavy Maintenance, Aircraft Systems, Troubleshooting, and MRO operations</strong>.</p><p>• Exposure to commercial aircraft, maintenance programs, engineering documentation, inspections, repairs, modifications, and technical troubleshooting.</p><p>• Opportunity to work alongside experienced Licensed Aircraft Engineers, inspectors, and aviation maintenance professionals.</p><p>• Technical training, aircraft-type familiarization, certification support, and professional development opportunities.</p><p>• Career progression into <strong>Senior Aircraft Technician, Licensed Aircraft Engineer, Aircraft Maintenance Engineer, Base Maintenance Supervisor, Maintenance Team Leader, or Maintenance Manager</strong> roles.</p><p>• A highly technical, safety-focused, and professional aviation working environment.</p><p>• Opportunities to develop specialist expertise in aircraft systems, structures, engines, avionics, or other maintenance disciplines.</p><ul><li>• Competitive compensation, shift allowances, performance incentives, and comprehensive benefits package.</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><br></p><p><br></p><p>LEO Middle East FZE is looking for an experienced and hands-on After-Sales / Technical Service Engineer to support our customers, distributors and projects across the Middle East and Africa.</p><p><br></p><p>The ideal candidate should have practical experience with pumps, motors, mechanical equipment, water systems or similar industrial equipment, and be comfortable working at customer sites.</p><p><br></p><p>Key Responsibilities</p><p><br></p><ul><li>Provide technical support for pump installation, commissioning, troubleshooting and maintenance.</li><li>Attend customer and project sites for inspection, testing, commissioning and technical service.</li><li>Diagnose mechanical and electrical problems related to pumps and pumping systems.</li><li>Troubleshoot issues involving mechanical seals, bearings, shafts, couplings, motors and related components.</li><li>Support distributors and customers with installation, operation and maintenance.</li><li>Prepare service reports and follow up on technical issues until resolution.</li><li>Coordinate with LEO factory and technical teams to investigate product complaints and technical problems.</li><li>Provide product and maintenance training to distributors, contractors and customer service teams.</li><li>Support warranty investigations and technical claim handling.</li><li>Travel within the UAE and occasionally to other Middle East and African countries when required.</li></ul><p><br></p><p>Requirements</p><p><br></p><ul><li>Diploma or Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Mechatronics or a related technical field.</li><li>Practical experience with pumps, motors, mechanical equipment, HVAC, water systems or similar equipment is preferred.</li><li>Experience in installation, commissioning, maintenance and troubleshooting is highly desirable.</li><li>Good understanding of mechanical components, including mechanical seals, bearings, shafts, couplings and motors.</li><li>Strong hands-on ability and practical problem-solving skills.</li><li>Able to work independently at customer sites.</li><li>Good command of spoken and written English.</li><li>UAE driving license is an advantage.</li><li>Willingness to travel within the UAE and internationally when required.</li></ul> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Who We Are Looking For</p><p><br></p><ul><li>The most important requirement is practical technical ability and a willingness to solve problems on site.</li></ul><p><br></p><ul><li>Candidates who have worked with pumps, rotating equipment, motors, water systems or other mechanical equipment and enjoy hands-on technical work are encouraged to apply.</li></ul><p><br></p><p>Career Opportunity</p><p><br></p><ul><li>This position offers the opportunity to develop into a Senior Technical Service Engineer / After-Sales Manager / Regional Technical Support Engineer, depending on experience and performance.</li></ul><p><br></p><ul><li>The successful candidate will work with international customers, distributors and projects across the Middle East and Africa.</li></ul><p><br></p><p><br></p></div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Job Title: Mechanical Procurement Engineer – Special System Sourcing</p><p><b>Department:</b> Commercial & Contracts Department</p><p><b>Location:</b> Dubai, UAE</p><p><b>Reporting To:</b> Head of Special Item Subcontract</p><p><b>Experience:</b> Minimum 5–7 Years</p><p><br></p><p>Job Summary</p><p>We are looking for an experienced Mechanical Procurement Engineer specializing in special mechanical systems, equipment procurement, and subcontract sourcing. The candidate will be responsible for sourcing, tendering, evaluating, negotiating, and managing subcontract packages related to specialized mechanical systems and MEP equipment.</p><p>Key Responsibilities</p><ul><li>Source and identify qualified suppliers and subcontractors for specialized mechanical systems and equipment.</li><li>Manage RFQs, ITTs, tender documentation, and technical clarification processes.</li><li>Review prequalification documents and assess subcontractor capabilities.</li><li>Coordinate technical and commercial bid evaluations.</li><li>Negotiate pricing, scope of work, and contractual terms with suppliers and subcontractors.</li><li>Coordinate with Contract Administrators and site teams to ensure procurement requirements are fulfilled.</li><li>Review subcontract agreements to ensure consistency with agreed commercial and technical terms.</li><li>Monitor subcontractor mobilisation, commencement, and demobilisation.</li><li>Manage subcontract administration, correspondence, notices, and penalty records.</li><li>Ensure timely completion of procurement and subcontracting procedures.</li></ul><p>Required Qualifications</p><ul><li>Bachelor's Degree in Mechanical Engineering, Procurement & Supply Chain Management, Quantity Surveying, Construction Management, or a related discipline.</li><li>Minimum 5–7 years of relevant experience in mechanical procurement, equipment sourcing, process systems, or subcontract procurement within construction, industrial, or engineering sectors.</li></ul><p>Technical Skills & Requirements</p><ul><li>Knowledge of special mechanical systems, industrial equipment, and MEP systems.</li><li>Experience in sourcing process equipment, instrumentation, and specialized mechanical systems.</li><li>Strong understanding of BOQs, bid evaluation, technical specifications, and commercial negotiations.</li><li>Proficiency in Microsoft Excel.</li><li>Familiarity with Aconex, SAP, Oracle, or other ERP/project management systems.</li><li>Strong negotiation, coordination, and communication skills.</li></ul><p><b>Specialized Systems Exposure:</b> Commercial kitchen equipment, facade cleaning systems, EV charging equipment, waste treatment systems, used oil networks, chiller-freezer rooms, lift systems, and other specialized mechanical systems.</p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><ul><li>Mechanical Procurement & Sourcing</li><li>Special Mechanical Systems Procurement</li><li>MEP Equipment Procurement</li><li>Subcontractor Management</li><li>Supplier Evaluation & Negotiation</li><li>RFQ & ITT Preparation</li><li>Technical & Commercial Bid Evaluation</li><li>BOQ Preparation & Analysis</li><li>Contract Administration</li><li>Industrial Equipment Sourcing</li><li>Tendering & Cost Analysis</li><li>Microsoft Excel (Advanced)</li><li>Aconex / SAP / Oracle</li><li>Vendor Management</li><li>Commercial Negotiation</li><li>Project Coordination</li></ul><p><br></p></div>
<p>• To carry out preventive and corrective maintenance of piling equipment and heavy construction machinery.
• Diagnose and repair hydraulic, mechanical, electrical, and pneumatic systems.
• Maintain and troubleshoot piling rigs, rotary drilling rigs, vibro hammers, hydraulic power packs, crawler cranes, and related equipment.
• Inspect engines, hydraulic pumps, motors, cylinders, gearboxes, winches, clutches, brakes, and transmission systems.
• Troubleshoot hydraulic leaks, pressure problems, overheating, abnormal noise, and equipment performance issues.
• Perform routine servicing, including oil, filters, lubrication, belts, hoses, seals, and other consumable parts.
• Read and interpret hydraulic, electrical, mechanical drawings, manuals, and equipment specifications.
• Carry out breakdown repairs and emergency maintenance to minimize equipment downtime.</p><p>• Technical diploma / ITI / vocational qualification in Mechanical Engineering, Heavy Equipment Maintenance, or a related field.
• Typically, around 10 years of experience maintaining piling, drilling, or heavy construction equipment.
• Strong experience with hydraulic systems and diesel engines.</p>
<p>ABS Engineering FZE is a leading engineering and fabrication company specializing in pressure vessels, process skids, structural steel, and oil & gas equipment. As part of our expansion and increasing project pipeline across the GCC, we are looking for an experienced Senior Proposal & Estimation Engineer to join our team.</p><p><br></p><p>Key Responsibilities:</p><ul><li>Review and analyze RFQs, ITBs, and tender documents</li><li>Prepare detailed cost estimates for:</li></ul><ol><li>Pressure Vessels (ASME Sec VIII Div 1)</li><li>Well Testing & EPF Equipment</li><li>Process Skids & Packages</li><li>Structural Steel Fabrication</li><li>Piping Systems</li></ol><ul><li>Perform material take-offs from drawings and specifications</li><li>Coordinate with engineering, procurement, and production teams for costing inputs</li><li>Obtain vendor quotations and evaluate subcontractor pricing</li><li>Prepare techno-commercial proposals in line with client specifications</li><li>Conduct risk analysis and identify cost optimization opportunities</li><li>Participate in client clarification meetings and tender negotiations</li><li>Maintain estimation databases and historical cost records</li></ul><p>Requirements:</p><ul><li>Bachelor’s Degree in Mechanical Engineering (or equivalent)</li><li>7–12 years of experience in proposal & estimation within oil & gas / heavy engineering</li><li>Strong knowledge of ASME codes, fabrication processes, and material costing</li><li>Experience handling EPC tenders in GCC is highly preferred</li><li>Strong commercial understanding and negotiation skills</li><li>Proficiency in MS Excel and estimation tools</li><li>Excellent communication skills</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Junior Engineer – Mechanical – Offshore Project<br><br><p><i><b>Belong, Connect, Grow, with KBR!</b></i></p><br><br><p><i><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</b></i></p><br><br><p><span><b><u>Job Title: Junior Engineer – Mechanical – Offshore Project</u></b></span></p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high‑profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based in Contractors Office in Abu Dhabi.</p><br><br><p>The project duration is until 2028 with possible extension.</p><br><br><p><b>The Junior Mechanical Engineer will support the maintenance, inspection, troubleshooting, commissioning, and reliability of mechanical systems and equipment on ADNOC offshore facilities. The role involves assisting senior engineers in ensuring safe, efficient, and reliable operation of rotating and static equipment while complying with ADNOC standards, HSE requirements, and industry best practices.</b></p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Engineering & Maintenance Support</b></p><br><br><ul><li><span><b>Assist in the maintenance and reliability of rotating and static equipment, including pumps, compressors, turbines, heat exchangers, pressure vessels, tanks, and piping systems.</b></span></li><li><span><b>Support troubleshooting and root cause analysis of mechanical equipment failures.</b></span></li><li><span><b>Participate in preventive, predictive, and corrective maintenance activities.</b></span></li><li><span><b>Review maintenance reports and provide recommendations for equipment performance improvement.</b></span></li><li><span><b>Monitor equipment performance and identify potential reliability issues.</b></span></li></ul><p><b>Inspection & Quality Assurance</b></p><br><br><ul><li><span><b>Assist in conducting routine inspections of mechanical equipment and offshore facilities.</b></span></li><li><span><b>Support mechanical integrity and condition monitoring programs.</b></span></li><li><span><b>Ensure work activities comply with project specifications, ADNOC standards, and international codes such as API, ASME, and ISO.</b></span></li><li><span><b>Participate in equipment acceptance testing and vendor inspections.</b></span></li></ul><p><b>Commissioning & Startup Support</b></p><br><br><ul><li><span><b>Support pre-commissioning, commissioning, and startup activities.</b></span></li><li><span><b>Assist in mechanical completion checks and punch-list clearance activities.</b></span></li><li><span><b>Participate in equipment functional testing and performance verification.</b></span></li><li><span><b>Coordinate with Operations, Electrical, Instrumentation, and Process teams during commissioning activities.</b></span></li></ul><p><b>Documentation & Reporting</b></p><br><br><ul><li><span><b>Review engineering drawings, P&IDs, equipment datasheets, and technical specifications.</b></span></li><li><span><b>Prepare maintenance records, inspection reports, and technical documentation.</b></span></li><li><span><b>Update equipment history records and maintenance management systems.</b></span></li><li><span><b>Assist in preparing engineering reports and shutdown work scopes.</b></span></li></ul><p><b>HSE Compliance</b></p><br><br><ul><li><span><b>Comply with ADNOC HSE policies, procedures, and permit-to-work requirements.</b></span></li><li><span><b>Participate in toolbox talks, risk assessments, safety audits, and incident investigations.</b></span></li><li><span><b>Promote safe work practices and ensure adherence to offshore safety regulations.</b></span></li><li><span><b>Support implementation of environmental and operational excellence initiatives.</b></span></li></ul><p><b>Qualifications</b></p><br><br><p><b>Education</b></p><br><br><ul><li><span><b>Bachelor's Degree in Mechanical Engineering from a recognized university.</b></span></li></ul><p><b>Experience</b></p><br><br><ul><li><span><b>0-3 years of experience in Oil & Gas, Petrochemical, Power Generation, Marine, or Industrial sectors.</b></span></li><li><span><b>Fresh graduates with internship or industrial training experience are encouraged to apply.</b></span></li><li><span><b>Exposure to offshore facilities is an advantage.</b></span></li></ul><p><b>Technical Skills</b></p><br><br><ul><li><span><b>Knowledge of rotating and static equipment maintenance.</b></span></li><li><span><b>Understanding of pumps, compressors, valves, turbines, and piping systems.</b></span></li><li><span><b>Familiarity with mechanical engineering principles and maintenance methodologies.</b></span></li><li><span><b>Ability to read and interpret engineering drawings, P&IDs, GA drawings, and equipment manuals.</b></span></li><li><span><b>Understanding of international standards such as API, ASME, ASTM, and ISO.</b></span></li><li><span><b>Knowledge of CMMS systems such as SAP is an advantage.</b></span></li><li><span><b>Proficiency in Microsoft Office applications.</b></span></li></ul><p><b>Behavioral Competencies</b></p><br><br><ul><li><span><b>Strong analytical and problem-solving skills.</b></span></li><li><span><b>Good communication and teamwork abilities.</b></span></li><li><span><b>Ability to work effectively in a multicultural offshore environment.</b></span></li><li><span><b>High level of responsibility and commitment to safety.</b></span></li><li><span><b>Self-motivated and eager to learn.</b></span></li></ul><p><b>Good organizational and time management skills.</b></p><br><br><br><br><br> </div>
<p><strong><u>Mechanical Design Engineer - Power Generation & Critical Infrastructure</u></strong></p><p>Dubai</p><p><br></p><p>A leading global engineering and power solutions organisation is seeking a Mechanical Design Engineer to support the design, development and optimisation of equipment used within power generation, critical infrastructure and industrial environments.</p><p>This is a highly visible engineering role offering the opportunity to work closely with customers, suppliers and multidisciplinary engineering teams on technically complex projects involving packaged power systems, equipment enclosures, cooling solutions and related mechanical systems.</p><p><strong>Key Responsibilities</strong></p><ul><li>Develop and review mechanical design concepts for industrial and power generation equipment.</li><li>Evaluate enclosure designs, ventilation systems, cooling performance, noise control and vibration mitigation.</li><li>Review engineering drawings, technical documentation and design specifications.</li><li>Collaborate with customers, suppliers and internal engineering teams to deliver practical and commercially viable solutions.</li><li>Support technical discussions throughout the project lifecycle, from concept through delivery.</li><li>Perform engineering assessments and provide recommendations for product improvements and design optimisation.</li><li>Participate in design reviews, technical problem-solving and continuous improvement initiatives.</li><li>Ensure designs comply with relevant engineering standards, performance requirements and customer expectations.</li></ul><p><br></p><p><strong>Requirements</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering or similar discipline.</li><li><strong>Approximately 7-10 years of mechanical engineering experience.</strong></li><li><strong>Experience within power generation, gensets, generator packaging, or packaged power solutions is highly desirable.</strong></li><li>Ability to read, interpret and review engineering drawings and technical documentation.</li><li>Understanding of mechanical system design, ventilation, cooling, acoustics and vibration principles.</li><li>Strong technical communication skills with the ability to engage customers, suppliers and internal stakeholders.</li><li>Experience using engineering tools such as Creo, ANSYS or equivalent is advantageous.</li><li>Comfortable working in both technical and customer-facing environments.</li><li>We are interested in engineers who have experience in one or more of the following areas:</li></ul><p>- Power generation, gensets or packaged power solutions</p><p>- Mechanical equipment enclosures, cooling and ventilation systems</p><p>- HVAC, noise, vibration or thermal management</p><p>- Industrial, oil & gas or rotating/static equipment environments</p><p><br></p>
Receive email alerts for Heavy equipment mechanical engineer Jobs jobs
You can cancel your email alert at anytime