Inspection Engineer Jobs in UAE

Purpose of the Role• Operate and administer the Corporate Services Service Desk, to efficiently process all tasks and work orders to the highest performance standard in line with established SLAs and KPIs.• Operate Client’s access control system to ensure all access provisions are performed accurately and efficiently. • This role will report into: Analyst – Hospitality & Employee Service.<br>Main Duties and Responsibilities • Receive and act upon requests for access control related items to administer access to all users.• Monitor, operate and administer the Corporate Services Service Desk, assign the relevant tasks to different users and complete the tasks of the Service Desk administrator.• Scheduling of repeating tasks on behalf of all CS section heads on the Service Desk software, assign the same properly and follow up for completion.• Generate access control and access level reports in pre-defined intervals and distribute the same.• Complete specialist access control reports for restricted areas and report on the same to the section head in charge of security.• Generate a large set of different reports for the CS division on a regular basis and report on the results to the section heads.• Effectively prioritize tasks depending on urgency and raise awareness concerning emergency requests with the relevant section head.• Answer the Service Desk telephone extension in an efficient and pleasant manner, assist callers with their inquiry and transfer them as necessary.• Process extensive reports for time & attendance and make adjustments on request.• Issues and updates client & Contractor ID cards with accuracy and in a timely manner.• Provide inventory checks and conduct issuance / return of secure tokens, report on the inventory efficiently to the relevant stakeholders.• Perform area inspections for certain restricted areas in the Council.• Carry out other administrative tasks for the department as assigned by the line manager.<br>Education and Experience<br>Education• Bachelor’s degree.<br>Technical Expertise / Skills / Knowledge• Must have Service Now software experience, preferred with Service Now certification.• Excellent IT skills with all relevant MS Office suite products, AI platforms and access control systems.• Excellent communication skills in English, with Arabic as a preferred addition.• High attention to detail and ability to multi-task with ease.• Able problem solver with creativity to suggest solutions

<p><strong>Key Responsibilities</strong></p><p><strong>Technical Design & Engineering</strong></p><ul><li><p>Develop conceptual and detailed engineering designs for Blast Resistant, Explosion Proof Modular Buildings, E-Houses, MCC Buildings, Control Rooms, and Containerized Solutions.</p></li><li><p>Review client specifications, datasheets, engineering standards, and tender documents.</p></li><li><p>Prepare technical layouts, General Arrangement (GA) drawings, equipment layouts, and engineering calculations.</p></li><li><p>Coordinate with Structural, Mechanical, Electrical, HVAC, Fire & Gas, and Architectural disciplines.</p></li><li><p>Ensure designs comply with international codes, standards, and project specifications.</p></li></ul><p><strong>Proposal Engineering & Tendering</strong></p><ul><li><p>Review RFQs, tender documents, and technical specifications.</p></li><li><p>Prepare technical and commercial proposals in line with client requirements.</p></li><li><p>Develop technical clarifications, compliance matrices, deviations, and bid documentation.</p></li><li><p>Participate in bid clarification meetings and technical discussions with clients and EPC contractors.</p></li><li><p>Coordinate with engineering, procurement, and commercial teams during bid preparation.</p></li></ul><p><strong>Estimation & Costing</strong></p><ul><li><p>Prepare detailed cost estimates and Bills of Quantities (BOQs).</p></li><li><p>Identify material requirements and obtain quotations from suppliers and subcontractors.</p></li><li><p>Evaluate fabrication, logistics, transportation, and installation costs.</p></li><li><p>Support management with pricing strategies, project budgeting, and risk assessments.</p></li></ul><p><strong>Application Engineering</strong></p><ul><li><p>Recommend optimized engineering solutions based on project specifications and customer requirements.</p></li><li><p>Deliver technical presentations and engineering support to clients.</p></li><li><p>Provide pre-award and post-award engineering assistance.</p></li><li><p>Support project execution teams during detailed engineering and implementation phases.</p></li></ul><p><strong>Qualifications</strong></p><ul><li><p>Bachelor's Degree in Mechanical Engineering, Structural Engineering, or a related Engineering discipline.</p></li><li><p>Minimum <strong>5–8 years</strong> of relevant experience in:</p><ul><li><p>Blast Resistant Buildings (BRB)</p></li><li><p>Explosion Proof Modular Buildings</p></li><li><p>E-Houses</p></li><li><p>MCC Buildings</p></li><li><p>Control Rooms</p></li><li><p>Containerized Building Solutions</p></li></ul></li><li><p>Experience delivering projects for Oil & Gas, Petrochemical, Refinery, Power, or Industrial Infrastructure sectors.</p></li></ul><p><strong>Preferred Experience</strong></p><ul><li><p>Hands-on experience in Blast Resistant and Explosion Proof Building design.</p></li><li><p>Strong knowledge of modular construction and containerized building systems.</p></li><li><p>Familiarity with international standards including:</p><ul><li><p>API</p></li><li><p>NFPA</p></li><li><p>IEC</p></li><li><p>ATEX</p></li><li><p>ISO</p></li><li><p>IBC</p></li><li><p>AISC</p></li><li><p>ASCE</p></li><li><p>Blast Resistant Design Guidelines</p></li></ul></li><li><p>Experience working with major GCC clients and EPC contractors such as ADNOC, Petrofac, Technip, McDermott, NMDC, Saipem, Samsung Engineering, and similar organizations.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong technical knowledge of Blast Resistant & Explosion Proof Modular Buildings</p></li><li><p>Technical Design Engineering</p></li><li><p>Proposal Engineering</p></li><li><p>Cost Estimation & BOQ Preparation</p></li><li><p>Tendering & Bid Management</p></li><li><p>Application Engineering</p></li><li><p>Technical Bid Evaluation</p></li><li><p>Modular Building Design</p></li><li><p>Client & EPC Coordination</p></li><li><p>Engineering Documentation</p></li><li><p>AutoCAD and MS Office Suite</p></li><li><p>Strong communication, analytical, and problem-solving skills</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Project description A hands-on technical architect / engineering lead embedded with feature teams across IBM Technology. The role codes, builds solutions from scratch, and enforces software engineering best practices (DDD, TDD, SOLID, Hexagonal Architecture, Twelve-Factor App) while delivering reusable building blocks. The Technical Architect also animates a developer community of practice to elevate engineering maturity across all squads. Responsibilities Hands-On Engineering Code alongside squads: DDD (Bounded Contexts, Aggregates, Domain Events), Hexagonal Architecture, SOLID, TDD Ensure Twelve-Factor App compliance for all cloud-native services Software Factory &amp; CI/CD Define and enforce CI/CD pipelines, code review standards, trunk-based branching, static analysis (SonarQube), and API standards Establish observability patterns: structured logging, distributed tracing, correlation IDs Cloud Adoption Drive cloud-native design patterns across squads: microservices, serverless, event-driven, container orchestration on AWS (primary) and Azure Enforce infrastructure-as-code (Terraform), cloud security best practices (IAM, secrets management, network segmentation), and cost-aware architecture Reusable Building Blocks Design and code shared libraries, starter kits, and project archetypes embedding all best practices Feature Team Enablement Pair-program, conduct code reviews, run workshops on DDD / TDD / SOLID / Hexagonal / Twelve-Factor Mentor developers to elevate overall engineering maturity Developer Community Animate Community of Practice: tech talks, coding dojos, hackathons Maintain an engineering playbook with patterns, anti-patterns, and reference implementations Expected Deliverables Engineering Playbook (DDD, TDD, SOLID, Hexagonal, Twelve-Factor, CI/CD, API standards) Reusable building blocks, starter kits, and project archetypes CI/CD pipeline templates for all service types Architecture Decision Records (ADRs) Monthly code quality and CoP activity reports Technical debt register Skills Must have Technical Skills: 10+ years hands-on software development, building solutions from scratch Expert in Java (Spring Boot), C# (.NET Core), Python, or Kotlin Deep DDD, TDD/BDD, SOLID, Hexagonal / Clean Architecture, Twelve-Factor App CI/CD tooling (Git, GitLab CI/CD); Docker, Kubernetes; Terraform / IaC Cloud: AWS (EKS, MSK, Lambda, S3, RDS, IAM, CloudFormation, API Gateway, SQS/SNS); Azure (AKS, DevOps, Service Bus, Key Vault). Event-driven architectures (Kafka, SQS/Service Bus/IBM MQ); API design (REST, gRPC, OpenAPI) Security-by-design, observability, and code quality tooling (SonarQube, SAST/DAST) Soft Skills: Influences through craft, not authority; proven mentor and community builder Pragmatic: balances engineering excellence with delivery pressure Strong technical writing: ADR</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Drive sales of BTU meters, smart valves, metering solutions, and meter billing services, while identifying and securing new meter replacement and billing projects.</p></li><li><p>Develop and maintain relationships with consultants, developers, district cooling providers, facility management companies, and end users.</p></li><li><p>Conduct technical presentations, product demonstrations, and training sessions to obtain client approvals and specifications.</p></li><li><p>Prepare techno-commercial proposals, negotiate contracts, and ensure timely order closure and handover to project teams.</p></li><li><p>Perform site visits, assess project requirements, and coordinate with engineering, procurement, and operations teams for successful project execution.</p></li><li><p>Maintain accurate sales forecasts, market intelligence, and competitor analyses, and achieve assigned revenue targets in compliance with company policies.</p><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Bachelor’s degree in Mechanical, Electrical, Instrumentation, or a related engineering discipline.</p></li><li><p>Minimum 3–10 years of proven experience in sales of BTU meters, smart valves, metering systems, or utility billing services, including meter replacement projects.</p></li><li><p>Mandatory Metering experience required.</p></li><li><p>Strong technical knowledge of district cooling metering, billing processes, and associated communication protocols and systems.</p></li><li><p>Demonstrated ability to deliver effective product demonstrations and secure technical approvals from clients and consultants.</p></li><li><p>Excellent communication, negotiation, and relationship-management skills, with a track record of consistently meeting or exceeding sales targets.</p></li><li><p>Valid UAE driving license and willingness to travel for client meetings and site visits.</p></li></ol><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Lead and execute comprehensive commissioning activities for complex industrial projects, ensuring systems perform to design specifications.</li><li>Develop and implement detailed commissioning plans, procedures, and checklists tailored to project requirements and industry standards.</li><li>Oversee the testing, energization, and start-up of critical plant equipment and systems, meticulously documenting all results.</li><li>Troubleshoot and resolve technical issues encountered during commissioning, collaborating with cross-functional teams to find effective solutions.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical, Mechanical, or relevant Engineering discipline from a recognized institution.</p></li><li><p>Minimum of 15 years of progressive experience in commissioning of large-scale industrial plants, preferably in Oil &amp; Gas, Power, or Petrochemical sectors.</p></li><li><p>Proven expertise in the commissioning of critical systems like rotating equipment, static equipment, and control systems (DCS/PLC).</p></li><li><p>Strong understanding of international codes, standards (e.g., ASME, API, IEC), and best practices in commissioning.</p></li></ul><br><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in Pipeline / Oil &amp; Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><p><strong>Age Criteria:</strong></p><ul><li><p>Maximum age limit is 49 years</p></li><li><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience</p></li></ul><p><strong>Managerial and SR. Positions:</strong></p><ul><li><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory</p></li><li><p>Walkin Chennai</p></li></ul><p></p></section>

<ul><li>Ensure strict adherence to project specifications and quality standards throughout all construction phases.</li><li>Conduct thorough site inspections and material testing to verify compliance with approved plans and codes.</li><li>Develop and implement comprehensive Quality Control (QC) plans tailored to specific project requirements.</li><li>Identify, document, and track non-conformities, working with project teams to implement corrective actions.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil Engineering or a related field from a recognized institution.</li><li>Minimum of 5 years of progressive experience in civil construction quality assurance and control.</li><li>Proven expertise in interpreting engineering drawings, specifications, and relevant building codes.</li><li>Proficiency in conducting site inspections, material testing, and laboratory analysis.</li></ul>

<ul><li><p>Support engineering design activities for power projects, substations, utility buildings, and associated infrastructure.</p></li><li><p>Prepare, develop, and review engineering drawings, layouts, calculations, specifications, schedules, and technical documents.</p></li><li><p>Review project requirements, tender documents, client specifications, applicable codes, and site conditions to establish design requirements.</p></li><li><p>Coordinate design activities with Civil, Structural, Electrical, MEP, BIM, Planning, Procurement, Construction, and QA/QC teams.</p></li><li><p>Develop design solutions that are technically sound, practical, cost-effective, and suitable for construction.</p></li><li><p>Prepare and update detailed design drawings, layouts, sections, details, schematics, and engineering documentation.</p></li><li><p>Review and coordinate multidisciplinary drawings to identify design clashes, interface issues, and inconsistencies.</p></li><li><p>Assist in preparing engineering calculations, design reports, material specifications, BOQs, and technical schedules.</p></li><li><p>Ensure design deliverables comply with approved project specifications, applicable international standards, UAE regulations, authority requirements, and client standards.</p></li><li><p>Review design inputs received from clients, consultants, vendors, and other engineering disciplines.</p></li><li><p>Coordinate with site teams to understand existing conditions and incorporate site requirements into design solutions.</p></li><li><p>Prepare and respond to RFIs, technical queries, design clarifications, and site-related engineering issues.</p></li><li><p>Review shop drawings, material submittals, vendor drawings, technical data, and other contractor submissions.</p></li><li><p>Assist in evaluating design changes, deviations, and proposed alternatives and provide appropriate technical recommendations.</p></li><li><p>Participate in design review meetings, technical coordination meetings, constructability reviews, and value engineering workshops.</p></li><li><p>Conduct design checks to ensure accuracy, completeness, constructability, and compliance with project requirements.</p></li><li><p>Coordinate with BIM teams to ensure engineering information is correctly incorporated into coordinated BIM models where applicable.</p></li><li><p>Support preparation and updating of as-built drawings and final engineering documentation.</p></li><li><p>Maintain design registers, drawing registers, document revisions, technical submissions, and engineering records.</p></li><li><p>Ensure all design deliverables are issued in accordance with project document-control procedures and approved schedules.</p></li><li><p>Coordinate with procurement teams to provide technical information required for material and equipment procurement.</p></li><li><p>Support technical evaluation of supplier and vendor proposals, drawings, and documentation.</p></li><li><p>Assist project teams during construction by resolving design-related technical issues and providing timely engineering support.</p></li><li><p>Conduct site visits and inspections when required to verify design conditions and construction requirements.</p></li><li><p>Monitor engineering deliverables and highlight potential design-related risks or delays to senior engineers and project management.</p></li><li><p>Support preparation of technical specifications, tender documentation, BOQs, and scope-of-work documents.</p></li><li><p>Assist in reviewing variations, additional works, design changes, and technical inputs for commercial assessments.</p></li><li><p>Maintain compliance with company engineering procedures, quality requirements, HSE considerations, and professional standards.</p></li><li><p>Provide technical support and guidance to junior engineers and designers as required.</p></li><li><p>Identify opportunities for design optimization, value engineering, constructability improvement, and cost reduction.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Civil Engineering, Electrical Engineering, Mechanical Engineering, MEP Engineering, or a related discipline, depending on the design specialization.</p></li><li><p>Typically 3–7 years of relevant engineering design experience, preferably within power, infrastructure, EPC, or large-scale construction projects.</p></li><li><p>Good understanding of engineering design principles, construction methodologies, technical specifications, and applicable standards.</p></li><li><p>Experience preparing and reviewing engineering drawings, calculations, specifications, BOQs, and technical documentation.</p></li><li><p>Ability to interpret multidisciplinary engineering drawings and coordinate design interfaces.</p></li><li><p>Experience with design software relevant to the discipline, such as AutoCAD, Revit, Civil 3D, STAAD . Pro, ETAP, or equivalent tools.</p></li><li><p>Knowledge of BIM coordination and multidisciplinary design processes will be an advantage.</p></li><li><p>Understanding of international engineering standards and UAE authority requirements.</p></li><li><p>Experience coordinating with clients, consultants, vendors, subcontractors, and multidisciplinary engineering teams.</p></li><li><p>Strong analytical, technical, communication, coordination, and problem-solving skills.</p></li><li><p>Good proficiency in MS Office and engineering documentation systems.</p></li><li><p>Ability to manage multiple design deliverables and meet project deadlines.</p></li><li><p>UAE/GCC project experience is preferred.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in power substations, transmission and distribution projects, utility infrastructure, or major EPC projects.</p></li><li><p>Exposure to HV/EHV power projects and multidisciplinary engineering design.</p></li><li><p>Experience with design-and-build or EPC project environments.</p></li><li><p>Familiarity with UAE utility/client requirements such as DEWA, TAQA/TRANSCO, or equivalent authorities.</p></li><li><p>Experience working with major EPC contractors, engineering consultants, and utility clients.</p></li><li><p>Relevant professional engineering certification or membership will be an advantage</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Emirates Electrical &amp; Instrumentation Company LLC is a proud member of the Ghobash Group. For almost 20 years, we have made vital contributions to the Oil &amp; Gas sector of the UAE, executing both onshore and offshore projects. Abu Dhabi National Oil Company (ADNOC) is one of our main clients along with Tier 1 and Tier 2 EPC contractors in this sector. We have the expertise to carry out full EPC&amp;M services for electrical and instrumentation works and bring our intrinsic knowledge to measure and automate exploration, production, separation, refining processes, and distribution through our localized services.</p><br><br>Job Description<br><p><strong>1. Construction &amp; Site Execution Support</strong></p><br><ul><li>Lead civil and structural construction activities in offshore.</li><li>Oversee site execution to ensure compliance with approved drawings, specifications, and method statements.</li><li>Coordinate with marine construction teams, contractors, and subcontractors.</li><li>Resolve site technical issues and provide real-time engineering solutions.</li></ul><p><strong>2. Engineering &amp; Design Coordination</strong></p><br><ul><li>Review and interpret structural and civil engineering drawings, calculations, and IFC documents</li><li>Coordinate with design consultants for offshore structures, marine foundations, and heavy civil works</li><li>Ensure constructability of designs and propose value engineering solutions where required.</li><li>Validate temporary works designs.</li></ul><p><strong>3. Project Planning &amp; Interface Management</strong></p><br><ul><li>Support construction sequencing and methodology development for offshore works.</li><li>Interface with marine, geotechnical, MEP, and dredging teams.</li><li>Ensure integration of offshore logistics, barge operations, and material handling plans.</li><li>Participate in look-ahead planning and progress monitoring.</li></ul><p><strong>4. Quality, Safety &amp; Compliance</strong></p><br><ul><li>Ensure compliance with international standards.</li><li>Enforce HSE standards in marine/offshore construction environments.</li><li>Lead inspections, quality checks, and material approvals.</li><li>Manage NCRs, technical deviations, and corrective actions.</li></ul><p><strong>5. Leadership &amp; Coordination</strong></p><br><ul><li>Lead a team of civil engineers, site engineers, and supervisors.</li><li>Coordinate with consultants, subcontractors, and client representatives.</li><li>Conduct technical meetings and progress reviews.</li><li>Mentor junior engineers and ensure knowledge transfer.</li></ul><br>Qualifications<br><ul><li>Bachelor’s Degree in Civil or Structural Engineering.</li><li>13–15+ years of experience in civil/structural construction projects in the oil &amp; gas industry.</li><li>Minimum 5+ years in offshore construction projects.</li><li>Ability to interpret complex engineering drawings and solve field issues.</li><li>Strong knowledge of international codes and standards.</li></ul><br>Additional Information<br><p><strong><strong>Personal Attributes</strong></strong></p><br><ul><li>Strong technical leadership and decision-making capability.</li><li>Detail-oriented with a strong safety mindset.</li><li>Proactive and accountable.</li><li>Clear communicator with ADNOC, subcontractors, and vendors.</li><li>Capable of working under tight offshore project deadlines.</li></ul><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>· Develop and design comprehensive Life Safety systems interface with all 3rd party equipment as per code requirement</p><p>· Hands on Experience in preparing LUX level, Heat Dissipation, SPL, Voltage drop and all similar calculations for FLS systems</p><p>· Attend technical and coordination meetings with consultants and contractors to resolve design issues.</p><p>· Review engineering drawings and ensure that all necessary approvals for systems are obtained in a timely manner.</p><p>· Design systems in accordance with project specifications and requirements, while managing NFPA/Civil Defense and client technical reviews to ensure compliance with technical and constructability standards.</p><p>· Work collaboratively with multidisciplinary teams including architects, engineers, and contractors to facilitate seamless project execution.</p><p>· Implement quality assurance and control procedures to guarantee that the delivered systems align with design intent and meet client expectations.</p><p>· Should be able to supervise assigned 2D &amp; 3D Drafting team</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Experience: </strong>Minimum 8 Years</p><p><strong>Work Location:</strong> Site Office, Abu Dhabi</p><p><strong>Education:</strong> Degree in Electrical or Electronics or Equivalent</p><p><strong>System Expertise:</strong> Fire Alarm, Voice Evacuation, Central Battery System, Smoke Detection System</p><p><strong>Preferred:</strong> Good Knowledge in NFPA, UAE Civil Defense Regulations.</p><p></p></section>

Candidates with a Bachelors degree in Electrical Engineering with more than 10 years of experience in brownfield, retrofit, revamp, or refurbishment projects. Plan, supervise and coordinate matters related to electrical requirements in detailed Engineering (subsea cable, switchgear, transformers etc.), construction and procurement activities across all facilities under the Department, in accord with Company’s project strategy/HSE standards in order to ensure reliability, integrity, uninterrupted operations and sustainable high productivity standards. Ensure that engineering design, procurement, construction, and project completion is done in compliance with the project contract requirements, i.e., project schedule, cost, HSE, and company standards and procedures. Prepare Tender document, evaluate bids, carryout technical clarifications, and arrange kick-off meetings related to the electrical engineering works. Review and approval of electrical engineering documents, drawings etc from vendors and contractors. Supervise all related modifications and new installations as appropriate upon approval by the Manager and concerned Departments. Demonstrated knowledge of IEC, IEEE, NFPA, API, BS, NEMA, and applicable local authority requirements. Must have an understanding of design maturity requirements across project phases, including Select, FEED, and Detailed Engineering. Experience in brownfield engineering, including the development of safe isolation, de-energization, and lockout/tagout requirements.<br>Salary: AED 16,000 + Family Accommodation

<ul><li><p>Oversee daily construction activities on-site, ensuring all work aligns with project specifications and timelines.</p></li><li><p>Perform regular inspections of work progress and quality, identifying issues and implementing corrective measures promptly.</p></li><li><p>Coordinate effectively with subcontractors and suppliers, ensuring timely delivery of materials and resources needed for construction.</p></li><li><p>Maintain thorough documentation of site activities, including daily reports, progress photos, and compliance records.</p></li><li><p>Fit-out experience is most</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil Engineering or a related field is essential for a solid technical foundation.</li><li>Professional engineering certification (e.g., PE) is highly preferred, showcasing advanced expertise and commitment.</li><li>A minimum of 3 years of hands-on experience in construction site management within the civil engineering sector.</li><li>Familiarity with local construction codes and regulations is crucial for ensuring compliance and quality standards.</li></ul>

<ul><li>Develop and implement comprehensive QA/QC plans specifically tailored for landscape construction projects, ensuring adherence to design specifications and quality standards.</li><li>Conduct rigorous site inspections to verify the quality of materials, workmanship, and installation of landscape elements like irrigation, hardscaping, and softscaping.</li><li>Monitor and document all quality control activities, including non-conformance reports, corrective actions, and material testing results, maintaining detailed project records.</li><li>Collaborate closely with project managers, site engineers, and contractors to address quality issues proactively and implement effective solutions.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Horticulture, Landscape Architecture, Civil Engineering, or a related field.</li><li>Minimum of 5 years of progressive experience in Quality Assurance and Quality Control within the landscape construction industry.</li><li>Proven understanding of landscape construction methods, materials (e.g., pavers, soil, plants, irrigation components), and industry best practices.</li><li>Familiarity with relevant local and international landscape standards, codes, and regulations.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <p>JOB PURPOSE:<br>Senior member of well engineering team. Provide technical and operational support for drilling operations from the tendering stage through project commencement, operations and wrap up. Interface between AD IDS rig site execution team, engineering team, customer and product lines to ensure flawless job execution by preparing detailed procedures, capturing and recording NPT, lessons learned and identified risks for optimization of ongoing and future operations. Provide technical advice on adoption of new drilling/well operations technologies and practices to enhance well design and operations in compliance with HSE standards.</p><br><p>KEY ACCOUNTABILITIES:<br>Job Specific Accountabilities<br> Consider well design options based on a review of drilling objectives and recommendations proposed by operations teams.<br> Monitor operations and provide engineering support to optimize operations efficiency<br> Provide technical guidance and support in developing a well plan and generating a well design that incorporates the casing, cementing and directional drilling parameters. Solicit and evaluate input from relevant service company providers.<br> Evaluate the feasibility of and the risks involved in achieving well objectives.<br> Generate cost estimates for the proposed well design, and develop an equipment list and material requirements.<br> Review drilling rig and other equipment specifications to ensure adequacy for the proposed well design.<br> Prepare a drilling program to meet well objectives.<br> Ensure that all well planning and design activities are conducted using workflows that comply with company well engineering and HSE standards, industry best practices and statutory requirements.<br> Provide technical input for the preparation and evaluation of tenders.<br> Engagement with product lines to optimize programs<br> Implement and track the company’s AFE review process for the well plan and well design.<br> Review existing and new technologies for incorporation into the well design.<br> Liaise with drilling operations team to identify requirements for equipment, materials and services, and to coordinate scheduling of well operations.<br> Maintain effective and proper working relationships with contractors and service companies to ensure that company requirements are understood and met in terms of expected standards of quality and performance.</p><br><p>QUALIFICATIONS, EXPERIENCE, KNOWLEDGE &amp; SKILLS:<br>Minimum Qualification<br> BSc in an engineering discipline, or equivalent.<br>Minimum Experience &amp; Knowledge &amp; Skills<br> Ten (10) or more years’ experience within drilling operations and well engineering.<br> Experience from both offshore and onshore operations<br> Fluency in spoken and written English.<br> Good computer knowledge.</p><br><br> </div>

<ul><li><p>Lead civil and structural design activities for power projects, substations, utility buildings, and associated infrastructure.</p></li><li><p>Develop, review, and approve civil and structural engineering designs, drawings, calculations, specifications, and technical documentation.</p></li><li><p>Prepare and review designs for equipment foundations, transformer foundations, switchgear foundations, control buildings, cable trenches, roads, drainage systems, retaining structures, fencing, and other associated civil works.</p></li><li><p>Review project requirements, tender documents, specifications, BOQs, site conditions, and client standards to establish design requirements.</p></li><li><p>Perform and review structural analysis and design calculations for reinforced concrete and structural steel elements.</p></li><li><p>Develop design concepts, detailed engineering drawings, layouts, sections, details, and construction documentation.</p></li><li><p>Ensure civil and structural designs are coordinated with electrical, mechanical, MEP, architectural, and other engineering disciplines.</p></li><li><p>Coordinate with electrical engineers to ensure proper integration of equipment foundations, cable trenches, access requirements, earthing interfaces, equipment layouts, and operational clearances.</p></li><li><p>Review geotechnical and topographical information and incorporate site conditions into civil and structural designs.</p></li><li><p>Evaluate soil conditions, foundation requirements, settlement considerations, groundwater conditions, and other geotechnical parameters.</p></li><li><p>Design and review foundations for transformers, GIS/AIS equipment, gantries, structures, poles, tanks, and other power-project equipment.</p></li><li><p>Review structural requirements for control rooms, substations, warehouses, workshops, administration buildings, and utility structures.</p></li><li><p>Prepare and review drainage, stormwater, roads, pavements, grading, earthworks, and site development designs.</p></li><li><p>Prepare and review technical specifications, design calculations, BOQs, material specifications, and design reports.</p></li><li><p>Ensure designs comply with applicable international standards, UAE regulations, authority requirements, and client specifications.</p></li><li><p>Coordinate with consultants, clients, contractors, suppliers, and authorities to resolve design-related issues and obtain necessary approvals.</p></li><li><p>Review shop drawings, fabrication drawings, material submittals, and technical submissions from contractors and suppliers.</p></li><li><p>Review RFIs, technical queries, design changes, and site modifications and provide timely engineering solutions.</p></li><li><p>Conduct design reviews, constructability assessments, value engineering studies, and technical evaluations to optimize project solutions.</p></li><li><p>Ensure designs are practical, economical, safe, and suitable for site execution.</p></li><li><p>Support project teams during construction by resolving technical issues, clarifying design requirements, and reviewing proposed site changes.</p></li><li><p>Conduct site visits and inspections to verify existing conditions and ensure construction conforms to approved designs.</p></li><li><p>Review and approve as-built drawings and final engineering documentation.</p></li><li><p>Maintain design records, calculations, drawing registers, technical submissions, and revision controls.</p></li><li><p>Coordinate with planning and project controls teams to ensure engineering deliverables are aligned with project schedules.</p></li><li><p>Monitor engineering deliverables and ensure timely completion of drawings, calculations, specifications, and technical submissions.</p></li><li><p>Provide technical guidance and mentoring to junior civil and structural engineers and designers.</p></li><li><p>Participate in design coordination meetings, technical workshops, client presentations, and project review meetings.</p></li><li><p>Identify design risks and develop appropriate mitigation measures.</p></li><li><p>Support project management and commercial teams with technical inputs for variations, claims, tenders, and change orders.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Civil Engineering or Structural Engineering.</p></li><li><p>Typically 7–10 years of relevant civil/structural design experience, preferably in power, substations, infrastructure, or EPC projects.</p></li><li><p>Strong experience in detailed civil and structural design for substations and power infrastructure.</p></li><li><p>Proven experience designing equipment foundations, transformer foundations, control buildings, cable trenches, roads, drainage, retaining structures, and associated civil works.</p></li><li><p>Strong knowledge of reinforced concrete and structural steel design.</p></li><li><p>Good understanding of geotechnical engineering principles and foundation design.</p></li><li><p>Experience with relevant international design codes and standards such as Eurocodes, British Standards, ACI, ASCE, or equivalent.</p></li><li><p>Knowledge of UAE building regulations, authority requirements, and utility standards is preferred.</p></li><li><p>Proficiency in AutoCAD and structural/civil design software such as STAAD . Pro, ETABS, SAFE, SAP2000, or equivalent.</p></li><li><p>Ability to prepare and independently review engineering calculations, design drawings, specifications, and technical reports.</p></li><li><p>Experience coordinating multidisciplinary engineering designs and resolving design interfaces.</p></li><li><p>Strong knowledge of design review, constructability, value engineering, and technical compliance.</p></li><li><p>Excellent analytical, problem-solving, communication, coordination, and technical leadership skills.</p></li><li><p>Ability to manage multiple design deliverables and meet project deadlines.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in HV/EHV substations, transmission and distribution projects, power infrastructure, or utility projects.</p></li><li><p>Experience designing civil works for transformer yards, GIS/AIS substations, switchyards, control buildings, and associated facilities.</p></li><li><p>Experience with UAE/GCC power and infrastructure projects.</p></li><li><p>Exposure to DEWA, TAQA/TRANSCO, or other UAE utility standards and approval processes.</p></li><li><p>Experience working with major EPC contractors, engineering consultants, and utility clients.</p></li><li><p>Professional certification or membership with a recognized engineering body will be an advantage.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

Company Description SDV Consulting Engineers offers a comprehensive selection of services in all major engineering disciplines, project management, and project development. We provide FEED, EPCM, PMC, Commissioning, and Advisory Services for the industrial sector, primarily in manufacturing & processing, energy, hydrogen plants, cold stores, and specialty facilities. For more information, visit www.sdvce.com.<br>Role Description We are seeking a highly motivated Senior Architect to join our team. This is a full time, office position based in Abu Dhabi Lead architectural design from concept to detailed design stages Coordinate with multidisciplinary consultants and project stakeholders Manage project deliverables, schedules and design quality Ensure compliance with UAE regulations, building codes and authority requirments Lead BIM/Revit design development and coordination Review and mentor junior architects and technical staff Support client presentations, authority submissions, and technical reviews<br>Qualifications Bachelor’s degree in Architecture Minimum 8-12 years of professional architectural experience Strong proficiency in Revit, BIM workflows and Auto CADStrong knowledge of UAE building regulations and authority approval processes Excellent communication, leadership and coordination skills Experience working in Abu Dhabi is highly preferred Experience with projects related to steel and industrial projects are mandatory Candidate currently in UAE is mandatory

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Your mission is to make DigitalZone able to scale.<br> You will build the platform's capacity to absorb campaign-level traffic spikes, and you will give every engineering team the tools, standards, and practices to load- and failure test their own systems.<br> This is an enablement role at its core: you raise the reliability bar across the org by building capability, not by owning every service yourself.<br> What you'll do Build the platform's scalability foundation: capacity planning, autoscaling, caching, queueing, and graceful degradation designed for large campaign spikes rather than steady-state load.<br> Establish load and failure testing as a standard engineering practice, giving teams the frameworks, tooling, and runbooks to test their own services and act on the results.<br> Own SLOs, error budgets, and the observability stack (metrics, logs, traces, alerting) across TypeScript, Go, and PHP/Laravel services, and standardize how teams instrument for scale.<br> Harden Postgres and AWS infrastructure for performance and availability, and reduce toil through automation and IaC.<br> Lead incident response and blameless postmortems, and drive the systemic fixes upstream into design and campaign planning so reliability is built in, not bolted on.<br> Partner with engineering teams early on capacity and resilience, acting as the multiplier that makes them self-sufficient at scaling their own systems.<br> Immediate, large-scale impact on a high-growth business Top-of-the-market compensation packages Work alongside top regional talent, with team members from Talabat, Careem, Etisalat, and more What you'll bring 5+ years in SRE, platform, or backend engineering, with strong production ownership of large-scale systems operating at 10s of thousands of requests per minute.<br> A track record of scaling systems through real traffic spikes, and of designing and running load and failure testing programs that other teams adopted.<br> Deep AWS experience and a solid grasp of Postgres performance and scaling.<br> Fluency with observability tooling and infrastructure-as-code, plus scripting in Go, TypeScript, or similar.<br> A calm, systematic approach to incidents, and the communication skills to influence and enable other teams rather than gatekeep.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Direct, supervises and Coordinates all the activities of engineers within the functional discipline of Process Engineering and provide technical advice to operations on all relevant process engineering aspects. Designs integrity and timeliness of work for technical studies.&nbsp;</p><br><br><br>Job Specific Accountabilities <br><p>•&nbsp;&nbsp; &nbsp;Prepares progress and performance analysis reports, highlights the problematic areas and recommends appropriate actions.<br>•&nbsp;&nbsp; &nbsp;Ensure that work is carried out in accordance with set policy and procedures and the regulatory standards are met.<br>•&nbsp;&nbsp; &nbsp;To reach and maintain ISO certification for Process section<br>•&nbsp;&nbsp; &nbsp;Review all engineering deliverables prepared by EPC contractor in respect to process and controls.<br>•&nbsp;&nbsp; &nbsp;Review of all systems and equipment design, to insure easy &amp; safe operations.<br>•&nbsp;&nbsp; &nbsp;Provide on-site process engineering consultation during construction, pre-commissioning &amp; commissioning stage of projects<br>•&nbsp;&nbsp; &nbsp;Act as Technical Authority for process discipline engineering in the Company. Provides mediation in the event of technical dispute between conflicting parties.<br>•&nbsp;&nbsp; &nbsp;Provides Process Engineering expertise for the development and authorization of Key Documents (Philosophies, Policies, Design Basis) for all project works covering Assets, Major Projects, Brownfield Projects and New field projects to ensure consistency and efficacy.<br>•&nbsp;&nbsp; &nbsp;Support, develops and reviews the Process engineering standards, codes of practice and technical specifications to ensure that they are in line with prevailing legislation, current best practice and reflect lessons learnt from past activities.<br>•&nbsp;&nbsp; &nbsp;Identifies, investigates and recommends appropriate new technical innovations, developments and enhancements to improve delivery of business goals.<br>•&nbsp;&nbsp; &nbsp;Ensures Process Engineering representation and expertise is available for necessary support of HSE driven studies and workshops.&nbsp;</p><br><br><br>Minimum Qualification <br><p>Bachelor Degree in Chemical Engineering or equivalent engineering discipline</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>8 years of experience</p><br><p>Revenues/ Budget: As per approved financial budget<br>Direct Reports: As per organization chart<br>Indirect Reports: As per organization chart</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br><br><br> </div>

<ul><li>Oversee daily construction activities on-site, ensuring adherence to project schedules and specifications.</li><li>Conduct regular quality inspections and coordinate with subcontractors to maintain high standards of work.</li><li>Prepare and review engineering plans, drawings, and specifications, identifying potential issues before they arise.</li><li>Manage site logistics, including material delivery, equipment usage, and waste management to optimize workflow.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor’s degree in Civil Engineering or a related field from an accredited institution.</li><li>Minimum of 3 years of experience in construction or civil engineering projects, demonstrating progressive responsibility.</li><li>Professional certification such as PMP or LEED is highly desirable, showcasing commitment to industry standards.</li><li>Experience with specific construction software (e.g., AutoCAD, Civil 3D) is essential for effective project execution.</li></ul>

<ul><li><p>Run repair and strengthening works on site end-to-end: patch repair, structural jacketing, crack injection (epoxy/PU), CFRP strengthening, concrete cutting and openings, condition surveys<br></p></li><li><p>Select and control the right materials, tools, and plant for each activity<br></p></li><li><p>Own the QC and records discipline: joint surveys, consultant hold-point inspections, injection logs, photo documentation, remeasurement<br></p></li><li><p>Coordinate consultants, material suppliers, and manpower crews<br></p></li><li><p>Work directly with the Operations Manager on method statements, pricing feedback, and delivery</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>BSc Civil/Structural Engineering<br></p></li><li><p>3–7 years UAE site experience with hands-on concrete repair, strengthening, or restoration — specialist repair contractor background strongly preferred<br></p></li><li><p>Working knowledge of repair materials and systems: Sika / Fosroc / MBCC bonding agents, micro-concrete, repair mortars, injection resins, CFRP<br></p></li><li><p>Familiar with the tools and machinery the works run on: jackhammers and needle guns, scabblers, wall saws and core drills, grinders, injection pumps, mixers, access equipment<br></p></li><li><p>Confident in consultant-facing inspections and technical submittals in English<br></p></li><li><p>UAE driving licence preferred</p></li></ol>

<ul><li>Oversee daily construction activities on-site, ensuring all work aligns with project specifications and timelines.</li><li>Perform regular inspections of work progress and quality, identifying issues and implementing corrective measures promptly.</li><li>Coordinate effectively with subcontractors and suppliers, ensuring timely delivery of materials and resources needed for construction.</li><li>Maintain thorough documentation of site activities, including daily reports, progress photos, and compliance records.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Civil Engineering or a related field is essential for a solid technical foundation.</p></li><li><p>Professional engineering certification (e.g., PE) is highly preferred, showcasing advanced expertise and commitment.</p></li><li><p>A minimum of 3 years of hands-on experience in construction site management within the civil engineering sector or Fitout Industry</p></li><li><p>Familiarity with local construction codes and regulations is crucial for ensuring compliance and quality standards.</p></li></ul>