Inspection Engineer Jobs - Al Ain UAE

<ul><li><p>Conduct inspections of lifting equipment and lifting accessories</p></li><li><p>Inspect cranes, hoists, slings, shackles, hooks and other lifting accessories</p></li><li><p>Conduct inspections of earth-moving machinery, including excavators, loaders, backhoe loaders, bulldozers, graders, rollers and dumpers</p></li><li><p>Perform visual, functional and operational inspections according to approved procedures</p></li><li><p>Verify equipment identification, documents, safe working load, safety devices and general condition</p></li><li><p>Identify defects, unsafe conditions and non-conformities</p></li><li><p>Prepare clear and accurate inspection reports and certificates</p></li><li><p>Maintain proper inspection records, photographs and supporting evidence</p></li><li><p>Ensure inspection tools and measuring equipment have valid calibration</p></li><li><p>Follow company procedures, applicable standards and client safety requirements</p></li><li><p>Maintain impartiality, confidentiality and professional conduct</p></li><li><p>Report immediately any equipment presenting a serious safety risk</p></li><li><p>Coordinate with clients, site representatives and the Technical Manager</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering – mandatory</p></li><li><p>Minimum 2 years of relevant inspection experience</p></li><li><p>Practical experience in inspecting lifting equipment and lifting accessories</p></li><li><p>Practical experience in inspecting earth-moving machinery</p></li><li><p>Knowledge of applicable inspection standards, safety requirements and manufacturer instructions</p></li><li><p>Ability to identify defects and prepare accurate inspection reports</p></li><li><p>LEEA qualification will be an advantage</p></li><li><p>Knowledge of ISO/IEC 17020 requirements will be an advantage</p></li><li><p>Good English communication and technical report-writing skills</p></li><li><p>Able to work independently at different client sites</p></li><li><p>Immediate joiners will be preferred</p></li></ul>

<p>To establish planning and project controls across building construction projects by implementing robust scheduling frameworks, monitoring performance, and ensuring timely, cost-effective project delivery. The role provides strategic direction, ensures alignment with contractual requirements, and enables informed decision-making through accurate forecasting, reporting, and risk analysis.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>1. Project Planning & Scheduling</strong></p><ul><li><p>Prepare detailed project schedules using tools such as Primavera & CCS Candy</p></li><li><p>Develop baseline programs in line with contract requirements</p></li><li><p>Define work breakdown structure (WBS) and project milestones</p></li><li><p>Establish project timelines, resource plans, and sequencing of activities</p></li></ul><p><br></p><p><strong>2. Progress Monitoring & Reporting</strong></p><ul><li><p>Implement project control systems to track progress, productivity, and performance</p></li><li><p>Monitor actual progress against planned schedules and identify variances</p></li><li><p>Lead schedule updates, critical path analysis, and performance measurement</p></li><li><p>Provide early warning signals and recommend corrective actions</p></li></ul><p><br></p><p><strong>3. Delay Analysis & Claims</strong></p><ul><li><p>Lead delay analysis </p></li><li><p>Review and validate subcontractor schedules and claims</p></li><li><p>Support commercial and contract teams in dispute resolution</p></li><li><p>Ensure all planning-related documentation meets contractual standards</p></li></ul><p><br></p><p><strong>4. Coordination & Stakeholder Management</strong></p><ul><li><p>Coordinate with project managers, engineering, procurement, and site teams</p></li><li><p>Interface with clients, consultants, and subcontractors on planning matters</p></li><li><p>Lead planning review meetings and progress discussions</p></li></ul><p><br></p><p><strong>5. Resource & Cost Planning</strong></p><ul><li><p>Align project schedules with resource and cost plans</p></li><li><p>Monitor manpower, equipment, and material utilisation</p></li><li><p>Support cash flow forecasting and cost control initiatives</p></li><li><p>Identify optimisation opportunities to improve efficiency</p></li></ul><p><br></p><p><strong>6. Risk Management</strong></p><ul><li><p>Identify potential project risks and delays</p></li><li><p>Develop mitigation and recovery plans</p></li><li><p>Monitor critical path and key project constraints</p></li></ul><p><br></p><p><strong>Skills & Competencies:</strong></p><ul><li><p>Advanced proficiency in <strong>Primavera and CCS Candy</strong> is mandatory</p></li><li><p>Strong knowledge of planning methodologies, cost and project control systems</p></li><li><p>Expertise in project analysis techniques</p></li><li><p>Strong sense of responsibility and discipline</p></li></ul>

<p>The role involves working on projects associated with Sewage & Stormwater, Flood Alleviation, Wastewater Networks and Water distribution networks Pumping Station, Recycling Plant and rehabilitation works. This will involve undertaking investigations, planning, designing, tendering, contract administration and construction supervising & monitoring.</p><p>Key accountabilities for this position include but are not limited to:</p><br><ul><li><p>Technical Delivery:</p></li></ul><p>Interacting with clients and contractor staff to determine and verify project requirements.</p><p>Preparing inspection reports and site records.</p><p>Performing civil and structural tests.</p><p>Providing general inspection on all construction labor and subcontracted tasks to ensure professional workmanship.</p><p>Identifying non-conforming works, generating reports and corrective actions, and coordinating responses.</p><p> Performs other responsibilities associated with this position as may be appropriate.</p><br><ul><li><p>Collaboration and working as part of a team.</p><br></li></ul><p> Work in conjunction with engineers to solve project design problems, support performing basic design calculations as required.</p><p>Conduct technical, feasibility studies and site investigations.</p><p>Liaison with teams working remotely from other parts of the world to facilitate completion of tasks, and project.</p><p>Excellent verbal and written English communication skills.</p><p>Experienced in the survey work with modern instruments and in keeping site measurement records</p><br><ul><li><p>Client Service Management</p><br></li></ul><p> Internal and external client liaison</p><p> Ability to build and maintain lasting and positive relationships.</p><p> Experience in utility diversions and management.</p><p>Proficient in software i.e. excel and MS word</p><br><ul><li><p>Follow safe work practices and adhere to company guidelines and policies for planning and executing work in a safe manner.</p><br></li></ul><p>Complete all work in line with Stantec Core Values and in accordance with the Stantec Quality Systems and Project Quality Procedures.</p><p>Design for safety, i.e., Construction Design Management.</p><br><ul><li><p>Other duties as requested from time to time by the Assistant Resident Engineer.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>The Inspector must have relevant technical qualification and must have not less than 5 years' experience in miscellaneous Sewage / Sewerage rehab work projects and supervision of infrastructure works.</p></li><li><p>Must have a Diploma/Degree in Civil.</p></li><li><p>Must be well experienced in the survey work with modern instruments and in keeping site measurement records.</p></li><li><p>Experience in identifying non-conforming works, generating reports and corrective actions and coordinating responses.</p></li><li><p>Excellent verbal and written English communication skills.</p></li></ul>

<p>We are seeking an experienced and detail-oriented Material / QA/QC Engineer to join our Bridge Maintenance Project team for Al Ain Municipality. The successful candidate will be responsible for ensuring that all materials, workmanship, inspections, and quality control procedures comply with project specifications, municipal standards, and relevant international codes. The ideal candidate must have strong experience in civil infrastructure and bridge maintenance projects within the UAE and be capable of coordinating effectively with consultants, subcontractors, suppliers, and site teams. Key Responsibilities QA/QC Responsibilities 1) Implement and maintain the Project Quality Management System (QMS). 2) Ensure all site activities comply with approved method statements, specifications, drawings, and quality standards. 3) Conduct inspections and quality checks for bridge maintenance and rehabilitation works. 4) Prepare and maintain Inspection Requests (IRs), Material Inspection Requests (MIRs), checklists, and quality records. 5) Coordinate with consultants and Al Ain Municipality representatives for inspections and approvals. 6) Monitor non-conformance reports (NCRs) and ensure corrective and preventive actions are implemented. 7) Review subcontractor quality documentation and ensure compliance with project requirements. 8) Ensure all testing activities are carried out as per approved standards and procedures. Material Engineering Responsibilities 1) Review and approve material submittals in coordination with the consultant/client requirements. 2) Verify that all construction materials comply with approved specifications and standards. 3) Coordinate material testing activities with approved laboratories. 4) Maintain proper records of material approvals, test reports, and certifications. 5) Monitor storage, handling, and usage of materials at site. 6) Ensure timely availability of approved materials to support project progress. Site Coordination 1) Conduct regular site inspections and quality audits. 2) Liaise with project engineers, site supervisors, and subcontractors to resolve quality-related issues. 3) Support the project team in achieving project milestones while maintaining quality standards. 4) Prepare daily, weekly, and monthly QA/QC reports.</p><p>1) Bachelor’s Degree in Civil Engineering. 2) Minimum 5–8 years of UAE experience in QA/QC and material engineering for infrastructure or bridge maintenance projects. 3) Experience working on Municipality, DOT, or infrastructure maintenance projects in the UAE is highly preferred. 4) Strong knowledge of QA/QC procedures, material testing standards, and civil engineering specifications. 5) Familiarity with bridge maintenance, rehabilitation, and structural repair works. 6) Good understanding of ISO standards and quality management systems. 7) Proficient in MS Office and preparation of QA/QC documentation. 8) Strong communication and coordination skills.+ 9) Valid UAE Driving License. 10) Must own a vehicle for site visits and project coordination. 11) Willingness to work across various project locations within the Al Ain Municipality area.</p>

<p>We are looking for a hands-on full stack developer to help build and improve a detection software system with multiple features such as detection, classification, and counting objects from 3D point cloud data end to end. This is a full-time, on-site Software Engineer/developer role based in Al Ain , United Arab Emirates. Daily responsibilities include implementing back-end services and APIs, writing clean and testable code, integrating software with hardware and third-party platforms, and troubleshooting issues in production environments. The role involves collaborating with cross-functional teams, contributing to system to technical documentation, and participating in code reviews and continuous improvement initiatives. The Software Engineer/developer will also help ensure that solutions remain secure, scalable, and aligned with client requirements and industry standards.</p><p>Responsibilities: • Build and maintain the LiDAR pipeline in Go and Python. • Develop and improve object detection, classification, and counting. • Build the React.js dashboard for visualizing point clouds and results. • Optimize the pipeline for speed, accuracy, and reliability. • Write clean, tested code and help shape technical decisions. Qualifications needed : • Strong, practical experience with Go and Python. • Solid experience building web interfaces with React.js. • Working knowledge of computer vision or 3D / point cloud data. • Ability to do basics of software analysis • Understanding of object detection and classification techniques. • Bachelor’s degree in Computer Science, Software Engineering, or a related technical field, or equivalent practical experience. • Strong problem-solving abilities, attention to detail, and the capacity to work effectively in a diverse, on-site team environment. • Good written and verbal communication skills in English; knowledge of Arabic is a plus. Nice to Have: • Experience with LiDAR or other sensor data. • Experience with ML frameworks such as PyTorch or TensorFlow. • Experience with point cloud tools such as PCL or Open3D. • Familiarity with AI coding assistants such as Claude Code.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and analyze civil infrastructure projects, ensuring compliance with safety and environmental regulations.</li><li>Prepare detailed project plans, including timelines, budgets, and resource allocation, to ensure successful project execution.</li><li>Conduct site inspections and assessments to evaluate project feasibility and compliance with design specifications.</li><li>Collaborate with multidisciplinary teams, including architects and urban planners, to integrate civil engineering solutions into larger projects.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Civil Engineering from an accredited institution is mandatory, with a preference for candidates holding a Master's degree.</li><li>Professional Engineer (PE) license is highly desirable, demonstrating commitment to the highest engineering standards.</li><li>At least 5 years of relevant work experience in civil engineering projects, showcasing progressive responsibility and technical expertise.</li><li>Experience in specific industries such as transportation, water resources, or structural engineering is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and analyze civil infrastructure projects, ensuring compliance with safety and environmental regulations.</li><li>Prepare detailed project plans, including timelines, budgets, and resource allocation, to ensure successful project execution.</li><li>Conduct site inspections and assessments to evaluate project feasibility and compliance with design specifications.</li><li>Collaborate with multidisciplinary teams, including architects and urban planners, to integrate civil engineering solutions into larger projects.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Civil Engineering from an accredited institution is mandatory, with a preference for candidates holding a Master's degree.</li><li>Professional Engineer (PE) license is highly desirable, demonstrating commitment to the highest engineering standards.</li><li>At least 5 years of relevant work experience in civil engineering projects, showcasing progressive responsibility and technical expertise.</li><li>Experience in specific industries such as transportation, water resources, or structural engineering is preferred.</li></ul><p></p></section>

<ul><li><p>Inspect lifting accessories and equipment</p></li><li><p>Do NDT work, especially MPI</p></li><li><p>Write inspection reports</p></li><li><p>Follow quality rules and checklists</p></li><li><p>Support audits if needed</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Requirements</p><ul><li><p>Mechanical Engineering degree (at least 3 years old)</p></li><li><p>At least 1 year of inspection experience</p></li><li><p>Knowledge of lifting accessories inspection</p></li><li><p>Basic knowledge of NDT methods like MPI (Magnetic Particle Inspection)</p></li><li><p>NDT Level II certificate is a plus</p></li><li><p>Understanding of ISO 9001 and ISO 17020 standards</p></li><li><p>Can speak and write English</p></li><li><p>Can work alone at sites</p></li></ul><br><p>We Offer</p><ul><li><p>Monthly salary</p></li><li><p>Safe and professional workplace</p></li><li><p>Learning and growth opportunity</p></li><li><p>Visa and Medical and insurance</p></li></ul>

<br><ul><li><p>Inspect lifting accessories and equipment</p></li><li><p>Do NDT work, especially MPI</p></li><li><p>Write inspection reports</p></li><li><p>Follow quality rules and checklists</p></li><li><p>Support audits if needed</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p>Requirements</p><ul><li><p>Mechanical Engineering degree (at least 3 years old)</p></li><li><p>At least 1 year of inspection experience</p></li><li><p>Knowledge of lifting accessories inspection</p></li><li><p>Basic knowledge of NDT methods like MPI (Magnetic Particle Inspection)</p></li><li><p>NDT Level II certificate is a plus</p></li><li><p>Understanding of ISO 9001 and ISO 17020 standards</p></li><li><p>Can speak and write English</p></li><li><p>Can work alone at sites</p></li><li><p>We Offer</p><ul><li><p>Monthly salary</p></li><li><p>Safe and professional workplace</p></li><li><p>Learning and growth opportunity</p></li><li><p>Visa and Medical and insurance</p></li></ul><p>Interested candidates are requested to send their updated CV and relevant certificates to </p><p>Job Type: Full-time</p><p>Education:</p><br><ul><li><p>Bachelor's (Required)</p></li></ul><br><p>License/Certification:</p><br><ul><li><p>ASNT NDT level II (Required)</p></li><li><p>UAE License (Required)</p></li></ul></li></ul>

<ul><li><p>Prepare and maintain proper professional and administrative procedures as required by and to satisfy JCI, DOH, International Patient Safety goal standards and the UAE Government’s rules and regulations.&nbsp;</p></li><li><p>Participates as the medical authority on pharmaceuticals in the planning and implementation of integrated preventive-curative medical care programs and medical therapies.&nbsp;</p></li><li><p>Incumbent has the principal responsibility for assuring the organization’s compliance and adherence to the UAE Government’s law, regulations, directives, and Ministerial decisions as directly related to pharmaceuticals, narcotics, controlled and psychotropic drugs.</p></li><li><p>The pharmacist will monitor patients on multiple drug therapy regimens for drug interaction, perform drug usage evaluation, drug-food interaction.</p></li><li><p>Respond to all code resuscitations.</p></li><li><p>The pharmacist will perform full range of pharmaceutical services independently without technical direction or review under the general administrative supervision of the chief pharmacist.</p></li><li><p>To deal with appropriate dosage and frequency of analgesics and opiate mediations to make sure that the patient will get the best pain relief and the least degree of side effects.</p></li><li><p>To deal with dosage conversion.</p></li><li><p>To identify noxious drugs and perform their subsequent safer drug replacement and supervising the correct dosage and administration of drug therapies.</p></li><li><p>To perform sterile compounding of intravenous administration under aseptic technique.</p></li><li><p>Advises Physicians on equivalents or substitute drugs.&nbsp; Is available to the entire staff, Physicians and Nurses, to answer their questions on pharmaceuticals and the compounding of special prescriptions.</p></li><li><p>Reviews drug usage patterns and suggests control when needed&nbsp;</p></li><li><p>Assures drug preparation/dispensation areas throughout the assigned area are devoid of all outdated or otherwise unusable drugs by frequent inspection of nursing drug cabinets, emergency trays and crash carts.&nbsp;</p></li><li><p>Recognizes apparent chemical and/or physical changes that certain preparations undergo during storage and removes them to prevent them from reaching the patient.</p></li><li><p>The pharmacist will perform limited administrative duties that include maintaining statistical records of workload, generating drug utilization reports, providing drug information and discharge counseling, preparing documentation, maintaining patient profile and participating in pharmacy education programs.</p></li><li><p>Strictly observes organization’s medical regulations and policies especially those related to infection control, patient safety, patient assessment and patient care.</p></li><li><p>Reports to and receives administrative guidance from the head pharmacist</p></li><li><p>Spontaneous dispensing of some medications.</p></li><li><p>Dispensing medications to patients after checking and counseling.</p></li><li><p>Answering all patients’ questions.</p></li><li><p>Ensuring proper management of near expiry drugs.</p></li><li><p>Compounding medications.</p></li><li><p>Performs other miscellaneous duties as requested by the head pharmacist.&nbsp;</p></li><li><p>Engages in the procurement, receiving and storage of vaccines as mentioned in the safe handling of vaccines and cold chain maintenance policy.</p></li><li><p>Coordinates with the concerned departments during vaccine indents.</p></li><li><p>Conducts and&nbsp; records &nbsp;monthly inspection in the concerned &nbsp;vaccine storage areas.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Successfully completed and holds an accredited recognized BSc. in Pharmacy.&nbsp;</p></li><li><p>Current and valid license to practice as a Pharmacist in home country.</p></li><li><p>Must have DOH License to practice.</p></li><li><p>2 years Experience in acute care facility.</p></li><li><p>Excellent command of oral and written English.</p></li><li><p>Must have a thorough knowledge of medical ethics</p></li></ul>

<ul><li>Execute precise component replacement and repair on printed circuit boards (PCBs) for ASICs, ensuring signal integrity.</li><li>Interpret and analyze complex electronic schematics, board layouts, and engineering documentation to guide repair procedures.</li><li>Calibrate and maintain specialized test and repair equipment, ensuring accuracy and reliability for critical operations.</li><li>Document all repair processes, findings, and component replacements meticulously for quality control and failure analysis.</li><li>Collaborate with engineering teams to provide feedback on failure modes and suggest design improvements for enhanced reliability.</li><li>Adhere strictly to electrostatic discharge (ESD) protocols and cleanroom procedures to prevent damage to sensitive components.</li><li>Conduct root cause analysis for recurring IC-level failures, contributing to process improvements and defect reduction.</li><li>Perform microscopic soldering and desoldering of surface-mount components and fine-pitch ICs with extreme precision.</li><li>Diagnose and troubleshoot complex hardware failures at the integrated circuit (IC) level using advanced diagnostic tools and schematics.</li><li>Utilize advanced microscopy and inspection equipment to identify physical defects, solder joint issues, and contamination on ICs.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possesses a Bachelor's degree in Electrical Engineering, Electronics Technology, or a related field.</li><li>Holds certifications such as IPC-A-610, IPC J-STD-001, or equivalent specialized electronics repair certifications.</li><li>Has a minimum of 5 years of hands-on experience in micro-electronics repair, specifically with ASIC-level troubleshooting.</li><li>Demonstrates proficiency in using oscilloscopes, multimeters, spectrum analyzers, and advanced soldering stations.</li><li>Exhibits exceptional manual dexterity and steady hands for intricate micro-soldering tasks.</li><li>Possesses a deep understanding of semiconductor device physics and failure mechanisms.</li><li>Is adept at reading and interpreting complex engineering schematics and datasheets.</li><li>Exhibits meticulous attention to detail and a commitment to achieving zero-defect repairs.</li><li>Communicates technical information clearly and effectively in English, both verbally and in writing.</li><li>Maintains the ability to work under magnification for extended periods and perform fine motor tasks.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Including but not limited to the following activities:</p></li><li><p>Identifies potential safety or fire hazards; takes action or makes recommendations to eliminate hazard.&nbsp;</p></li><li><p>Assures that fire extinguishers, smoke detectors, fire alarms, sprinkler system and fire hydrants are in operating condition; conducts fire drills and participates in fire prevention programs.</p></li><li><p>Conducts or participates in employee safety and accident prevention programs.</p></li><li><p>Supervise the security rounds in order to protect the buildings and grounds against trespassing, theft, and vandalism.</p></li><li><p>Apprehends persons suspected of theft, vandalism, or trespassing; contacts police and detains suspect until police arrive.</p></li><li><p>Responds to all fire alarms; determines whether a fire exists; attempts to extinguish fire and contacts fire department.</p></li><li><p>Writes incident and accident reports and maintains a record of activities.</p></li><li><p>Performs related work as assigned.</p></li></ul><p>&nbsp;Additional Job Duties</p><ul><li><p>Assures safety coverage for an assigned shift by scheduling assignments and overseeing the work In-House security personnel.</p><ul><li><p>Provides training and explains work instructions to subordinate Fire and Safety Officers.&nbsp;</p><ul><li><p>Plans, develops and conducts employee safety, fire prevention and accident prevention programs.&nbsp;</p></li></ul></li></ul></li><li><p>Regularly performs safety and security activities recognized as the most complex and difficult.</p></li><li><p>Actively participate in JCI accreditation project.</p></li></ul><br><p><strong>OSH&nbsp; ROLES AND RESPONSIBILITIES:</strong></p><p><strong><u>General:</u></strong></p><p><strong><u>&nbsp;</u></strong>Comply with reasonable OSH instructions, policies and safe working procedures&nbsp;</p><ul><li><p>Use of appropriate personal protective equipment and safety systems.&nbsp;</p></li><li><p>Be familiar with emergency and evacuation procedures&nbsp;</p></li><li><p>Not willfully or recklessly endanger anyone’s health and safety&nbsp;</p></li><li><p>Assist with the preparation of risk assessments&nbsp;</p></li><li><p>Report OSH Hazards, incidents, Near misses and issues&nbsp;</p></li><li><p>Reduce, Reuse, Recycling of waste as much as possible&nbsp;</p></li><li><p>Attend all OSH Trainings, awareness programs and mock drills.&nbsp;</p></li><li><p>Participates in the OSHMS audits, inspections, ensuring standards are maintained</p></li></ul><p><strong>Specific</strong>:</p><p><strong>OSH Facilitator-FMS /Fire and Safety Officer</strong></p><ul><li><p>Reports to the EHSMS Dept./Quality and have the immediate control of the workplace in the event of any emergencies/incidents/accidents.</p></li><li><p>Maintain and conduct periodic checks &amp; tests of all safety equipment such as firefighting, emergency equipment and the fire system, signages and plans.</p></li><li><p>Ensuring FMS staff are adequately trained to perform their work safely e.g. OSHMS induction, safe work practices, risk assessments, specialized safety training (Specific Trainings);</p></li><li><p>Ensure regular workplace OSH inspections are conducted;</p></li><li><p>Ensure appropriate hazard identification and risk assessment activities are recorded and maintained for all OSH/ EHS activities and events;</p></li><li><p>Ensures that all contractors working in NMCSH Al Ain primases have undergone OSHMS induction before commencing the work. Coordinate &amp; supervise all contractors and vendor’s activities.</p></li><li><p>Inspects Contractor work activities during any renovation and construction activities.</p></li><li><p>Conduct Joint OSH risk assessment with contractor and communicate to the relevant party.</p></li><li><p>Maintain an implement the management of contractors related to OSHAD-SF requirements.</p></li><li><p>Ensure that annually OSH Competency Assessment is conducted for all departmental staff, by evaluating the skills of staff. An action plan and competency records shall be maintained by as per the ADM-EHS-P014-12 OSH competency procedure.&nbsp;</p></li></ul><p><strong>OSHMS Committee:</strong></p><ul><li><p>Oversee and direct the planning, coordination, development, implementation, monitoring of implementation and compliance of and with NMCSH OSHMS.</p></li><li><p>Evaluate and assess the existing conditions, operations, and practices at NMCSH to determine the impact of and general compliance with OSH.</p></li><li><p>Perform risk assessments to identify and generate improvement opportunities and need for process changes to comply with OSH.</p></li><li><p>Propose and review OSH program budget, resources, staffing plan, program and staff objectives, action plans, monitoring and reporting, and timelines.</p></li><li><p>Review quarterly OSH reports, OSH incident reports and annual independent external NMCSH OSH are sent to DOH as per DOH OSHMS Monitoring and reporting requirements.</p></li><li><p>Review and approve the internal audits/inspection plan of OSH and an independent external audit on an annual basis. Audit report/result are reviewed and approved.</p></li><li><p>Review the OSH performance and analysis the action plan/root cause if required.</p></li><li><p>Authorize the change before implementation and/or startup. Authorization will be documented in the minute of meeting.</p></li><li><p>Report to Senior Management the status and progress of the development, implementation, monitoring and compliance on NMCSH OSH requirements a least once per year</p></li></ul><p><strong>Committee Members:</strong></p><ul><li><p>Membership will consist of permanent members who are required to attend all meetings.</p></li><li><p>Reports to be submitted to OSHMS Committee comprising all OSHMS/EHSMS issues and matter.</p></li><li><p>If OSHMS Committee assigns additional roles and responsibilities, then it will be fulfilled.</p></li></ul><p><strong>Osh investigators, team member roles and responsibilities.</strong></p><ul><li><p>Ensure as soon as practicable following the occurrences, shall collect the statements of witnesses and other relevant to the occurrence.&nbsp;</p></li><li><p>Maintain a timeline of events, Include dates and names on initial report, initial and subsequent contact details, meeting /conference calls, and decisions pertaining to the incident.</p></li><li><p>Instructs others if conducting case finding or active/enhanced surveillance.</p></li><li><p>Ensure an initial written report of the incident is submitted to Team Leader within assigned timeframe by the Team leader.&nbsp;</p></li><li><p>Carryout case investigation activities as delegated by the Team Leader.</p></li><li><p>Provide daily status report of outstanding and completed investigations to the Team Leader.</p></li><li><p>Complete OSH investigation and reporting forms</p></li><li><p>Ensure to comply with roles and responsibility defined NMCSH 013.ADM-EHS- P006-12 HAZARD, NEAR MISS AND INCIDENT REPORTING POLICY</p></li></ul><p><strong>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;OSH Internal Auditor:&nbsp;</strong></p><ul><li><p>Ensure internal audit is effective to improve its OSH performance.&nbsp;</p></li><li><p>Ensure to conduct OSHMS internal audit as per OSHAD-SF/NMCSH Al Ain requirements.</p></li></ul><p><strong>Additional duties/responsibilities (related to ADHICS) assigned to this position in clear, concise language:</strong></p><ul><li><p>Health Information Literacy and Skills:</p></li><li><p>Adhere to information systems policies and procedures as required by Health Care Organization.</p></li><li><p>Privacy, Confidentiality of Health Information:</p></li><li><p>Follow security and privacy policies and procedures to the use of networks, including intranet and Internet.</p><ul><li><p>Follow confidentiality and security measures to protect electronic health information.</p></li><li><p>Maintain data integrity and validity within an information system.</p></li><li><p>Report any possible breaches of confidentiality in accordance with organizational policies.</p></li></ul></li><li><p>Health Information/Data Technical Security:</p></li><li><p>Apply departmental and organizational data and information system security policies</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Educational level -&nbsp; acquired through completion of related course.</p></li><li><p>Experience – At least two years of experience in a public safety occupation preferred.</p></li><li><p>Excellent command of oral and written English. Knowledge in Arabic is desirable.</p></li><li><p>Knowledge of state laws related to the safety of people and property.&nbsp;</p></li><li><p>Knowledge of the principles of safety, accident, and fire prevention.</p></li><li><p>Knowledge of first aid methods and techniques.&nbsp;</p></li><li><p>Knowledge of departmental policies, procedures, rules and regulations related to the&nbsp;</p></li><li><p>safety and security of people and property.</p></li><li><p>Ability to maintain composure and respond properly during emergencies.&nbsp;</p></li><li><p>Ability to learn and apply written laws, rules, and regulations related to the work.&nbsp;</p></li><li><p>Ability to train, guide and evaluate the work of other Fire and Safety Officers.</p></li><li><p>Ability to determine work priorities and allocate work to other Fire and Safety Officers.&nbsp;</p></li><li><p>Ability to work independently.</p></li><li><p>Ability to plan, develop and conduct employee safety, fire prevention and accident prevention programs.&nbsp;</p></li></ul><p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Performance Criteria:</strong></p><ul><li><p>Ability to work constructively and interact professionally with others</p><ul><li><p>Ability to attend to meetings outside of normal business hours</p><ul><li><p>Ability to respond to emergencies on a 24-hour basis.&nbsp;</p></li></ul></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Including but not limited to the following activities:</p></li><li><p>Identifies potential safety or fire hazards; takes action or makes recommendations to eliminate hazard.&nbsp;</p></li><li><p>Assures that fire extinguishers, smoke detectors, fire alarms, sprinkler system and fire hydrants are in operating condition; conducts fire drills and participates in fire prevention programs.</p></li><li><p>Conducts or participates in employee safety and accident prevention programs.</p></li><li><p>Supervise the security rounds in order to protect the buildings and grounds against trespassing, theft, and vandalism.</p></li><li><p>Apprehends persons suspected of theft, vandalism, or trespassing; contacts police and detains suspect until police arrive.</p></li><li><p>Responds to all fire alarms; determines whether a fire exists; attempts to extinguish fire and contacts fire department.</p></li><li><p>Writes incident and accident reports and maintains a record of activities.</p></li><li><p>Performs related work as assigned.</p></li></ul><p>&nbsp;Additional Job Duties</p><ul><li><p>Assures safety coverage for an assigned shift by scheduling assignments and overseeing the work In-House security personnel.</p><ul><li><p>Provides training and explains work instructions to subordinate Fire and Safety Officers.&nbsp;</p><ul><li><p>Plans, develops and conducts employee safety, fire prevention and accident prevention programs.&nbsp;</p></li></ul></li></ul></li><li><p>Regularly performs safety and security activities recognized as the most complex and difficult.</p></li><li><p>Actively participate in JCI accreditation project.</p></li></ul><br><p><strong>OSH&nbsp; ROLES AND RESPONSIBILITIES:</strong></p><p><strong><u>General:</u></strong></p><p><strong><u>&nbsp;</u></strong>Comply with reasonable OSH instructions, policies and safe working procedures&nbsp;</p><ul><li><p>Use of appropriate personal protective equipment and safety systems.&nbsp;</p></li><li><p>Be familiar with emergency and evacuation procedures&nbsp;</p></li><li><p>Not willfully or recklessly endanger anyone’s health and safety&nbsp;</p></li><li><p>Assist with the preparation of risk assessments&nbsp;</p></li><li><p>Report OSH Hazards, incidents, Near misses and issues&nbsp;</p></li><li><p>Reduce, Reuse, Recycling of waste as much as possible&nbsp;</p></li><li><p>Attend all OSH Trainings, awareness programs and mock drills.&nbsp;</p></li><li><p>Participates in the OSHMS audits, inspections, ensuring standards are maintained</p></li></ul><p><strong>Specific</strong>:</p><p><strong>OSH Facilitator-FMS /Fire and Safety Officer</strong></p><ul><li><p>Reports to the EHSMS Dept./Quality and have the immediate control of the workplace in the event of any emergencies/incidents/accidents.</p></li><li><p>Maintain and conduct periodic checks &amp; tests of all safety equipment such as firefighting, emergency equipment and the fire system, signages and plans.</p></li><li><p>Ensuring FMS staff are adequately trained to perform their work safely e.g. OSHMS induction, safe work practices, risk assessments, specialized safety training (Specific Trainings);</p></li><li><p>Ensure regular workplace OSH inspections are conducted;</p></li><li><p>Ensure appropriate hazard identification and risk assessment activities are recorded and maintained for all OSH/ EHS activities and events;</p></li><li><p>Ensures that all contractors working in NMCSH Al Ain primases have undergone OSHMS induction before commencing the work. Coordinate &amp; supervise all contractors and vendor’s activities.</p></li><li><p>Inspects Contractor work activities during any renovation and construction activities.</p></li><li><p>Conduct Joint OSH risk assessment with contractor and communicate to the relevant party.</p></li><li><p>Maintain an implement the management of contractors related to OSHAD-SF requirements.</p></li><li><p>Ensure that annually OSH Competency Assessment is conducted for all departmental staff, by evaluating the skills of staff. An action plan and competency records shall be maintained by as per the ADM-EHS-P014-12 OSH competency procedure.&nbsp;</p></li></ul><p><strong>OSHMS Committee:</strong></p><ul><li><p>Oversee and direct the planning, coordination, development, implementation, monitoring of implementation and compliance of and with NMCSH OSHMS.</p></li><li><p>Evaluate and assess the existing conditions, operations, and practices at NMCSH to determine the impact of and general compliance with OSH.</p></li><li><p>Perform risk assessments to identify and generate improvement opportunities and need for process changes to comply with OSH.</p></li><li><p>Propose and review OSH program budget, resources, staffing plan, program and staff objectives, action plans, monitoring and reporting, and timelines.</p></li><li><p>Review quarterly OSH reports, OSH incident reports and annual independent external NMCSH OSH are sent to DOH as per DOH OSHMS Monitoring and reporting requirements.</p></li><li><p>Review and approve the internal audits/inspection plan of OSH and an independent external audit on an annual basis. Audit report/result are reviewed and approved.</p></li><li><p>Review the OSH performance and analysis the action plan/root cause if required.</p></li><li><p>Authorize the change before implementation and/or startup. Authorization will be documented in the minute of meeting.</p></li><li><p>Report to Senior Management the status and progress of the development, implementation, monitoring and compliance on NMCSH OSH requirements a least once per year</p></li></ul><p><strong>Committee Members:</strong></p><ul><li><p>Membership will consist of permanent members who are required to attend all meetings.</p></li><li><p>Reports to be submitted to OSHMS Committee comprising all OSHMS/EHSMS issues and matter.</p></li><li><p>If OSHMS Committee assigns additional roles and responsibilities, then it will be fulfilled.</p></li></ul><p><strong>Osh investigators, team member roles and responsibilities.</strong></p><ul><li><p>Ensure as soon as practicable following the occurrences, shall collect the statements of witnesses and other relevant to the occurrence.&nbsp;</p></li><li><p>Maintain a timeline of events, Include dates and names on initial report, initial and subsequent contact details, meeting /conference calls, and decisions pertaining to the incident.</p></li><li><p>Instructs others if conducting case finding or active/enhanced surveillance.</p></li><li><p>Ensure an initial written report of the incident is submitted to Team Leader within assigned timeframe by the Team leader.&nbsp;</p></li><li><p>Carryout case investigation activities as delegated by the Team Leader.</p></li><li><p>Provide daily status report of outstanding and completed investigations to the Team Leader.</p></li><li><p>Complete OSH investigation and reporting forms</p></li><li><p>Ensure to comply with roles and responsibility defined NMCSH 013.ADM-EHS- P006-12 HAZARD, NEAR MISS AND INCIDENT REPORTING POLICY</p></li></ul><p><strong>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;OSH Internal Auditor:&nbsp;</strong></p><ul><li><p>Ensure internal audit is effective to improve its OSH performance.&nbsp;</p></li><li><p>Ensure to conduct OSHMS internal audit as per OSHAD-SF/NMCSH Al Ain requirements.</p></li></ul><p><strong>Additional duties/responsibilities (related to ADHICS) assigned to this position in clear, concise language:</strong></p><ul><li><p>Health Information Literacy and Skills:</p></li><li><p>Adhere to information systems policies and procedures as required by Health Care Organization.</p></li><li><p>Privacy, Confidentiality of Health Information:</p></li><li><p>Follow security and privacy policies and procedures to the use of networks, including intranet and Internet.</p><ul><li><p>Follow confidentiality and security measures to protect electronic health information.</p></li><li><p>Maintain data integrity and validity within an information system.</p></li><li><p>Report any possible breaches of confidentiality in accordance with organizational policies.</p></li></ul></li><li><p>Health Information/Data Technical Security:</p></li><li><p>Apply departmental and organizational data and information system security policies</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Educational level -&nbsp; acquired through completion of related course.</p></li><li><p>Experience – At least two years of experience in a public safety occupation preferred.</p></li><li><p>Excellent command of oral and written English. Knowledge in Arabic is desirable.</p></li><li><p>Knowledge of state laws related to the safety of people and property.&nbsp;</p></li><li><p>Knowledge of the principles of safety, accident, and fire prevention.</p></li><li><p>Knowledge of first aid methods and techniques.&nbsp;</p></li><li><p>Knowledge of departmental policies, procedures, rules and regulations related to the&nbsp;</p></li><li><p>safety and security of people and property.</p></li><li><p>Ability to maintain composure and respond properly during emergencies.&nbsp;</p></li><li><p>Ability to learn and apply written laws, rules, and regulations related to the work.&nbsp;</p></li><li><p>Ability to train, guide and evaluate the work of other Fire and Safety Officers.</p></li><li><p>Ability to determine work priorities and allocate work to other Fire and Safety Officers.&nbsp;</p></li><li><p>Ability to work independently.</p></li><li><p>Ability to plan, develop and conduct employee safety, fire prevention and accident prevention programs.&nbsp;</p></li></ul><p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Performance Criteria:</strong></p><ul><li><p>Ability to work constructively and interact professionally with others</p><ul><li><p>Ability to attend to meetings outside of normal business hours</p><ul><li><p>Ability to respond to emergencies on a 24-hour basis.&nbsp;</p></li></ul></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a skilled <strong>Pump Mechanic / Pump Technician</strong> with hands-on experience in preventive maintenance, troubleshooting, repair, and operation of various pump systems within a Facilities Management environment. The ideal candidate should have strong mechanical knowledge and experience working with centrifugal pumps, booster pumps, submersible pumps, and life support or water circulation systems. The responsibilities will include but not limited to:</p><br><p><strong><u>Preventive Maintenance</u></strong></p><ul><li><p>Perform scheduled preventive maintenance on all pump systems.</p></li><li><p>Inspect and maintain pump casings, mechanical seals, bearings, shafts, couplings, motors, valves, strainers, and base frames.</p></li><li><p>Carry out lubrication activities and ensure proper pump alignment.</p></li><li><p>Maintain pump rooms in a clean, safe, and accessible condition.</p></li></ul><p><strong><u>Inspection &amp; Monitoring</u></strong></p><ul><li><p>Conduct daily inspections and record operational parameters such as pressure, flow, temperature, vibration, noise levels, leakage, and running hours.</p></li><li><p>Identify abnormalities and report them promptly.</p></li></ul><p><strong><u>Breakdown Maintenance</u></strong></p><ul><li><p>Attend emergency breakdowns and diagnose pump failures.</p></li><li><p>Troubleshoot issues including low pressure, excessive vibration, seal leakage, motor overheating, bearing failures, and blockages.</p></li><li><p>Repair or replace defective components and restore equipment to operation.</p></li></ul><p><strong><u>Pump Testing &amp; Alignment</u></strong></p><ul><li><p>Perform pump and motor alignment checks.</p></li><li><p>Verify coupling conditions and conduct operational testing after repairs.</p></li><li><p>Ensure safe return-to-service procedures are followed.</p></li></ul><p><strong><u>Pump Systems Covered</u></strong></p><ul><li><p>Domestic water booster pumps</p></li><li><p>Drainage and sewage pumps</p></li><li><p>Storm water pumps</p></li><li><p>Firefighting pumps</p></li><li><p>HVAC chilled water pumps</p></li><li><p>Transfer pumps</p></li><li><p>Filtration and water feature systems</p></li><li><p>Life support and animal area water systems (where applicable)</p></li></ul><p><strong><u>Documentation &amp; Reporting</u></strong></p><ul><li><p>Update maintenance records, CMMS/work orders, breakdown reports, and asset histories.</p></li><li><p>Record spare parts consumption and maintenance activities.</p></li></ul><p><strong><u>Safety &amp; Coordination</u></strong></p><ul><li><p>Follow Permit-to-Work (PTW) requirements and use appropriate PPE.</p></li><li><p>Coordinate with FM Supervisors, Operations Teams, Security, and other stakeholders during maintenance activities and shutdowns.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma in Mechanical Engineering or Technical Certification ✅ 3–5 years of pump maintenance experience in FM, Utilities, Industrial, or Infrastructure projects ✅ Experience with centrifugal pumps, submersible pumps, booster systems, and pump alignment ✅ Knowledge of mechanical seals, bearings, couplings, and preventive maintenance practices ✅ Basic electrical troubleshooting knowledge and ability to coordinate with electrical teams for motor and control-related faults</p><br><p><strong><u>Preferred Skills</u></strong></p><ul><li><p>Pump Overhauling</p></li><li><p>Mechanical Seals Replacement</p></li><li><p>Bearing Replacement</p></li><li><p>Shaft Alignment</p></li><li><p>Vibration Analysis</p></li><li><p>CMMS Maintenance Systems</p></li><li><p>Breakdown Troubleshooting</p></li><li><p>Preventive &amp; Corrective Maintenance</p></li><li><p>Water Distribution Systems</p></li><li><p>Fire Pump Maintenance</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Performs all functions of CSSD.</p><ul><li><p>Collection of instruments with proper checking and integrity of equipment.</p></li><li><p>Establishes and ensures the implementation of CSSD policies and procedures.</p></li><li><p>Receiving the instrument properly and uses prescribed technique for disinfection and cleaning methods.</p></li><li><p>Using proper P.P.E. (personal protective equipment) and follow infection control protocol lead by hospital policies in each area of the department</p></li><li><p>Directs and supervises activities of CSSD assistants relating to the operations involved in CSSD.</p></li><li><p>Performs duties as CSSD technician independently and work proficiently.</p></li><li><p>Consistently uses recipes to correctly assemble, protect, wrap containerize and/or peel pouch and label instruments. Also, identifies the cleanliness and functionality.</p></li><li><p>Properly handles sterile item supplies, equipment and instruments.</p></li></ul></li></ul><br><ul><li><p>Selection of proper sterilization method and required know and follow the principles of sterilization.</p></li></ul><br><ul><li><p>Proper distribution of items to respective department.</p></li></ul><br><ul><li><p>Maintain all decontamination records, updates the checklist and maintain all sterilization records to be updated.</p></li></ul><br><ul><li><p>Assesses CSSD supply needs and establish a standard CSSD inventory level for supplies and function of instruments and equipment’s.</p></li></ul><br><ul><li><p>Reporting shortage of material to the supervisor/ in charge at earliest convenience, maintaining records for ordering and replenishment</p></li></ul><br><ul><li><p>Develop, coordinate and participate in routine educational program and staff meeting to facilitate professional growth and quality patient care.</p></li></ul><br><ul><li><p>Monitors compliance with hospital policies and procedures</p></li></ul><br><ul><li><p>Coordinates with PCI nurse. Promoting &amp; maintaining qualities in all services &amp; ensure continuous quality improvement measure are in place. Conduct method evaluation/ development as per standard policies &amp; procedure.</p></li></ul><br><ul><li><p>Maintaining strict confidence in relation to patient information whether formally or informally recorded.</p></li></ul><br><ul><li><p>Participating in education session conducted for department staff and various hospital committee and staff meeting.</p></li></ul><br><ul><li><p>Maintaining positive and effective working relationships within the departments/divisions and also within the other department facility</p></li></ul><br><ul><li><p>Technician should understand/know the efforts, service, special skills and caring of instrument which ultimately effecting the early recovery and discharge of each patient.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Certification of training from an approved institute of CSSD technicians or Diploma in Nursing.</p><ul><li><p>Required experience 2 years in relevant area in absence of formal course.</p></li><li><p>License to practice by DOH.</p></li><li><p>Must be fluent in spoken and written English, Arabic speaking desirable but not essential.</p></li><li><p>Demonstrates good organizational and communication skills.</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a skilled <strong>Residence Technician</strong> to join our team and support the maintenance and upkeep of residential properties. The ideal candidate will have hands-on experience in multi-skilled maintenance, ensuring high-quality living standards for residents. The duties will include but not limited to:</p><br><ol><li><p>Perform day-to-day maintenance and repair activities within residential units.</p></li><li><p>Handle <strong>electrical, plumbing, HVAC, and basic carpentry</strong> works.</p></li><li><p>Respond promptly to maintenance requests and breakdowns.</p></li><li><p>Conduct routine inspections to identify faults and preventive maintenance needs.</p></li><li><p>Ensure all work is completed in line with <strong>safety and quality standards</strong>.</p></li><li><p>Coordinate with supervisors and other technical staff for complex repairs.</p></li><li><p>Maintain tools, equipment, and proper documentation of work completed.</p></li><li><p>Support emergency call-outs and after-hours maintenance when required.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Minimum <strong>2–5 years of experience</strong> in residential or facilities maintenance.</p></li><li><p>Technical qualification / diploma in <strong>Electrical / Mechanical / HVAC</strong> or related field.</p></li><li><p>Strong knowledge of <strong>multi-skilled maintenance works</strong>.</p></li><li><p>Good troubleshooting and problem-solving skills.</p></li><li><p>Basic English communication skills.</p></li><li><p>Ability to work independently and as part of a team.</p></li></ol><p></p></section>