Planning Engineer Jobs - Dubai UAE

<ul><li><p>Assist in planning and execution of testing and commissioning activities for power projects and substations.</p></li><li><p>Review approved single-line diagrams, schematics, equipment specifications, protection philosophies, and commissioning procedures.</p></li><li><p>Assist in preparing testing and commissioning plans, method statements, checklists, test procedures, and schedules.</p></li><li><p>Coordinate testing and commissioning activities with Engineering, Construction, QA/QC, Planning, HSE, and Project Management teams.</p></li><li><p>Support testing of transformers, GIS/AIS switchgear, circuit breakers, CTs, PTs/CVTs, isolators, busbars, cables, protection systems, control panels, and auxiliary equipment.</p></li><li><p>Carry out pre-commissioning inspections and verify equipment readiness before testing.</p></li><li><p>Perform and record electrical tests such as insulation resistance, continuity, winding resistance, transformer ratio, contact resistance, circuit breaker timing, and other applicable tests.</p></li><li><p>Assist in protection relay testing, secondary injection testing, trip circuit testing, interlocking checks, and functional testing.</p></li><li><p>Assist with testing of metering, control, automation, SCADA, RTU, communication, and substation automation systems.</p></li><li><p>Support cable testing, including continuity, insulation resistance, phasing, sheath testing, and other required tests.</p></li><li><p>Verify control wiring, secondary circuits, alarms, indications, interlocks, and protection circuits against approved drawings and schematics.</p></li><li><p>Ensure testing activities are carried out using calibrated and approved test equipment.</p></li><li><p>Review calibration certificates of testing instruments and maintain proper test equipment records.</p></li><li><p>Prepare and maintain test sheets, test reports, inspection requests, checklists, and commissioning records.</p></li><li><p>Coordinate testing and inspection activities with clients, consultants, utility representatives, vendors, and third-party agencies.</p></li><li><p>Ensure testing activities comply with approved ITPs, method statements, project specifications, applicable IEC standards, and client requirements.</p></li><li><p>Assist in identifying equipment defects, wiring errors, test failures, and technical discrepancies and coordinate corrective actions.</p></li><li><p>Analyze test results and verify compliance with specified acceptance criteria.</p></li><li><p>Coordinate with construction teams to rectify installation defects before testing and commissioning.</p></li><li><p>Support Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), pre-commissioning, and final commissioning activities as required.</p></li><li><p>Assist in energization activities and ensure all safety, isolation, LOTO, and permit-to-work requirements are followed.</p></li><li><p>Support troubleshooting of electrical equipment and systems during testing and commissioning.</p></li><li><p>Monitor commissioning progress against the approved project schedule and report delays or technical constraints.</p></li><li><p>Participate in commissioning coordination meetings and provide updates on completed and pending activities.</p></li><li><p>Assist in preparing daily, weekly, and monthly testing and commissioning progress reports.</p></li><li><p>Coordinate with equipment manufacturers, specialist vendors, subcontractors, and commissioning teams during testing and troubleshooting.</p></li><li><p>Assist in preparing and maintaining commissioning dossiers, test certificates, inspection records, and handover documentation.</p></li><li><p>Track and close commissioning punch points, snags, and outstanding technical issues.</p></li><li><p>Ensure all test results and commissioning records are properly documented and traceable.</p></li><li><p>Support final system verification, energization, performance testing, and project handover.</p></li><li><p>Ensure compliance with project HSE requirements during all testing and commissioning activities.</p></li><li><p>Follow electrical safety procedures, LOTO requirements, safe isolation practices, and approved switching procedures.</p></li><li><p>Provide technical support to technicians and commissioning personnel as required.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Electrical Engineering or a related discipline.</p></li><li><p>Typically 3–7 years of relevant experience in electrical testing and commissioning, preferably in power, substations, transmission, distribution, or EPC projects.</p></li><li><p>Good knowledge of electrical testing and commissioning procedures for power systems.</p></li><li><p>Exposure to transformers, GIS/AIS switchgear, circuit breakers, CTs, PTs/CVTs, isolators, busbars, cables, protection panels, and control systems.</p></li><li><p>Good understanding of electrical protection, control, metering, SCADA, and substation automation systems.</p></li><li><p>Ability to read and interpret single-line diagrams, protection schematics, wiring diagrams, control circuits, and equipment drawings.</p></li><li><p>Knowledge of insulation resistance, continuity, contact resistance, transformer testing, circuit breaker testing, and protection relay testing.</p></li><li><p>Familiarity with secondary injection testing and functional testing of protection and control systems.</p></li><li><p>Knowledge of IEC standards, electrical safety procedures, LOTO, isolation, and energization processes.</p></li><li><p>Experience using electrical testing equipment such as multimeters, insulation resistance testers, primary/secondary injection equipment, and relay test kits.</p></li><li><p>Ability to prepare test reports, commissioning records, checklists, and technical documentation.</p></li><li><p>Experience coordinating with clients, consultants, vendors, subcontractors, and utility representatives.</p></li><li><p>Good understanding of QA/QC requirements, ITPs, inspection procedures, and project documentation.</p></li><li><p>Strong troubleshooting, analytical, communication, coordination, and problem-solving skills.</p></li><li><p>Proficiency in MS Office and relevant testing/commissioning documentation tools.</p></li><li><p>Ability to work on site and support commissioning activities under tight project deadlines.</p></li><li><p>UAE/GCC project experience is preferred.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in HV/EHV substations, power transmission and distribution, utility infrastructure, or major EPC projects.</p></li><li><p>Exposure to GIS/AIS commissioning, transformer testing, protection relay testing, and substation automation.</p></li><li><p>Familiarity with Omicron or equivalent testing equipment.</p></li><li><p>Knowledge of IEC 61850, SCADA, RTU, and communication system testing will be an advantage.</p></li><li><p>Familiarity with DEWA, TAQA/TRANSCO, or other UAE utility/client testing and commissioning requirements.</p></li><li><p>Experience working with major EPC contractors, engineering consultants, equipment manufacturers, and utility clients.</p></li><li><p>Relevant testing and commissioning certification or professional engineering membership will be an advantage.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

Job Title: Planning Engineer - UAE National only Sector: Rail / Metro – Communications & Control Systems Location: Dubai, United Arab Emirates Department: Bid & Project Management Job Summary<br><br>The Planning Engineer is responsible for planning and scheduling activities for assigned bids, projects, or programs against an approved baseline (Performance Measurement Baseline – PMB). The role ensures effective monitoring and control of tasks, deliverables, schedule risks, workload, and costs.<br><br>The Planning Engineer must have strong expertise in project management structures and baselines (WBS, OBS, RAM, WPDDs, PMB), scheduling techniques (PERT, Critical Path), and Schedule Risk Analysis (SRA). The role also supports claims-related activities including Extension of Time (EOT) and delay analysis, and performs basic Earned Value tracking and variance analysis to support corrective actions.<br><br>Key Responsibilities<br><br>Develop the contract programme using contract documents, WBS structures, cost and resource loading, and relevant project inputs. Support portfolio management activities (project requests and resource capacity planning). Support feasibility and strategic planning to establish milestones across pre- and post-construction phases (procurement, design, tender). Prepare resource plans using productivity rates. Prepare operational schedules and monitor project progress based on site conditions. Produce and monitor daily/weekly/monthly planning reports and KPIs. Report progress and critical planning issues to project management and propose mitigation actions for expected delays. Prepare delay analysis with the Commercial team to support Extension of Time (EOT) and claims. Follow up delays and support preparation of formal correspondence to reserve contractual rights for claims. Coordinate with client and consultant to avoid delays during project execution. Ensure quality and approval of project controls procedures, schedules, cost reports, and reporting deliverables. Prepare the Project Controls Plan and support development of project controls procedures. Lead/support risk management activities; consolidate risk analysis and monitor updates. Coordinate with Finance for target sales, budget tracking, and invoicing. Support contract reviews through collection and analysis of project performance data (schedule, cost, and resource needs).<br><br>Experience<br><br>Minimum 4 years of experience in project management. Minimum 6 years of experience in Communications and Control Systems projects (international exposure preferred). Technical experience in metro/railway systems, including communications & control, security, passenger information and comfort systems. Proven ability to manage customers/stakeholders in complex, multicultural environments across multi-disciplinary technical areas. Strong leadership skills and ability to manage teams/resources without direct reporting lines.<br><br>Education & Certifications<br><br>University Degree in Engineering (Electronic / Telecommunication / Computer Engineering). Professional certificates in Planning & Scheduling (preferred).<br><br>Technical Skills<br><br>Strong working knowledge of Primavera P6. Advanced MS Office skills (Word, Excel, Power Point). Strong understanding of scheduling concepts including Critical Path and schedule acceleration principles. Basic Earned Value tracking and variance analysis (cost and schedule).<br><br>Soft Skills<br><br>Strong organizational skills and attention to detail. Excellent communication and coordination skills. Proactive, solution-oriented mindset. Able to work effectively with one or multiple teams.<br><br>Health, Safety & Environment (HSE)<br><br>Ensure personal safety and the safety of others. Comply with local HSE laws and company HSE requirements. Use PPE and safety equipment as required. Promote environmental responsibility (waste reduction, recycling, energy/water conservation). Stop work and report immediately if any activity may impact health and safety.<br><br>SEGULA Technologies is a global engineering group, boosting the competitiveness of all major industrial sectors: automotive, aerospace, energy, rail, naval, life sciences, and telecoms. With a presence in more than 30 countries and 140 locations worldwide, the Group prioritizes close relationships with its clients, driven by the expertise of its 15,000 employees. As a leading engineering player putting innovation at the heart of its strategy, SEGULA Technologies manages large-scale projects, ranging from initial studies to industrialization and production. SEGULA TECHNOLOGIES is dedicated to gender balance and diversity, recognizing and recruiting talent of all backgrounds.

Job Description<br><br>Job Overview:<br><br>The Principal Process Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex process engineering-related problems and will work independently with minimal guidance. The Principal Process Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of process engineering. As such, they must have in-depth expertise in process engineering as well as broad knowledge of the process engineering discipline within the engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements Clearly communicate and explain difficult concepts and persuade others to adopt a point of view When acting as Lead Engineer, in addition:Direct medium or large Engineering team as a Lead Engineer Lead the Discipline engineering design of the assigned work area and completed within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager Ensure interfaces and deliverables are clearly identified Maintain responsibility for progress and productivity, identifying any required corrective action Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc. Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for Discipline designs and drawings Maintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager Prepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirements Prepare bids and project's Discipline engineering budget and execution plans, updating as required Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Process Engineering Prepare, review, and (as Lead Engineer) approve design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables Monitor costs of own work processes Responsible for the engineering integrity of the assigned work area Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions and/or present topics at lunch and learns; etc.) Responsible for checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balances Process flow diagrams (PFD) Piping and instrument diagrams (P&ID) Equipment and instrument process datasheets Process specifications Operating philosophy and startup and operating manuals Equipment list (process data) Line list (process data) Equipment and line sizing calculations Flare radiation and dispersion calculations Depressurization and flare network studies Process studies Provide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout review Area classification drawings Safety studies Electrical load list Equipment datasheets Instrument datasheets ESD and F&G logic diagrams and control narratives Participate in HAZAN, HAZID, HAZOP, and other safety/operability/reliability studies and workshops Assist in closing out HAZOP action items Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews When acting as Lead Engineer, in addition:Act as project-based Discipline point of contact in communications and meetings with Customer counterparts Ensure substantive communications are documented Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager Plan, organize, and assign tasks, responsibilities, and work-hours budgets to the discipline team and verify tasks are completed within budgets Plan Discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan Prepare working forecasts identifying change management plans, corrective action, and real-time schedule Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity Alert the project team of any deviation from the scope or a need for a change order Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including a performance at interfaces with others Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning Anticipate project engineering needs and plan accordingly Coordinate with vendor for discipline-managed/procured items Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members<br>Reports to:<br><br>Project: Lead Engineer, Project Engineering Manager or Project Manager<br><br>Functional: Supervising Department Manager<br><br>Liaise with: All Engineering disciplines, Fabrication Group, Safety Department, Project Management Team, Document Control,<br><br>Project Planner, Project Cost Controller, QC, Certification Group, Procurement Group, Subcontractors, Vendors, and<br><br>Customers<br><br>Supervises: Senior Engineers and Engineers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s Degree or Master’s Degree in Engineering15-20 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design Preferably Registered Professional Engineer or member of professional engineering society as applicable Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable Knowledgeable in project coordination and execution skills<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Job Description<br><br>Job Overview:<br><br>The Principal Process Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex process engineering-related problems and will work independently with minimal guidance. The Principal Process Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of process engineering. As such, they must have in-depth expertise in process engineering as well as broad knowledge of the process engineering discipline within the engineering function.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements Clearly communicate and explain difficult concepts and persuade others to adopt a point of view When acting as Lead Engineer, in addition:Direct medium or large Engineering team as a Lead Engineer Lead the Discipline engineering design of the assigned work area and completed within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager Ensure interfaces and deliverables are clearly identified Maintain responsibility for progress and productivity, identifying any required corrective action Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc. Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for Discipline designs and drawings Maintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager Prepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirements Prepare bids and project's Discipline engineering budget and execution plans, updating as required Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Process Engineering Prepare, review, and (as Lead Engineer) approve design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables Monitor costs of own work processes Responsible for the engineering integrity of the assigned work area Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions and/or present topics at lunch and learns; etc.) Responsible for checking the following key deliverables, applicable as per the Project scope:Process simulations / Heat and material balances Process flow diagrams (PFD) Piping and instrument diagrams (P&ID) Equipment and instrument process datasheets Process specifications Operating philosophy and startup and operating manuals Equipment list (process data) Line list (process data) Equipment and line sizing calculations Flare radiation and dispersion calculations Depressurization and flare network studies Process studies Provide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities:Layout review Area classification drawings Safety studies Electrical load list Equipment datasheets Instrument datasheets ESD and F&G logic diagrams and control narratives Participate in HAZAN, HAZID, HAZOP, and other safety/operability/reliability studies and workshops Assist in closing out HAZOP action items Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews When acting as Lead Engineer, in addition:Act as project-based Discipline point of contact in communications and meetings with Customer counterparts Ensure substantive communications are documented Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager Plan, organize, and assign tasks, responsibilities, and work-hours budgets to the discipline team and verify tasks are completed within budgets Plan Discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan Prepare working forecasts identifying change management plans, corrective action, and real-time schedule Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity Alert the project team of any deviation from the scope or a need for a change order Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including a performance at interfaces with others Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning Anticipate project engineering needs and plan accordingly Coordinate with vendor for discipline-managed/procured items Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members<br>Reports to:<br><br>Project: Lead Engineer, Project Engineering Manager or Project Manager<br><br>Functional: Supervising Department Manager<br><br>Liaise with: All Engineering disciplines, Fabrication Group, Safety Department, Project Management Team, Document Control,<br><br>Project Planner, Project Cost Controller, QC, Certification Group, Procurement Group, Subcontractors, Vendors, and<br><br>Customers<br><br>Supervises: Senior Engineers and Engineers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s Degree or Master’s Degree in Engineering15-20 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design Preferably Registered Professional Engineer or member of professional engineering society as applicable Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable Knowledgeable in project coordination and execution skills<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a skilled and detail-oriented Civil Engineer to plan, design, supervise, and manage construction projects. The ideal candidate will ensure projects are completed safely, on time, within budget, and in compliance with local regulations and quality standards.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Plan, design, and oversee construction and infrastructure projects.</p></li><li><p>Prepare project estimates, budgets, BOQs, and technical reports.</p></li><li><p>Review engineering drawings and specifications.</p></li><li><p>Supervise construction activities to ensure compliance with approved plans and safety regulations.</p></li><li><p>Coordinate with architects, consultants, contractors, and subcontractors.</p></li><li><p>Conduct site inspections and monitor project progress.</p></li><li><p>Ensure compliance with local authority regulations and building codes.</p></li><li><p>Resolve technical issues arising during construction.</p></li><li><p>Prepare project documentation, progress reports, and completion reports.</p></li><li><p>Ensure quality control and adherence to project timelines.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor's degree in Civil Engineering.</p></li><li><p>2–5 years of relevant experience (or as required).</p></li><li><p>Strong knowledge of construction methods, materials, and engineering principles.</p></li><li><p>Proficiency in AutoCAD, Microsoft Office, and project management software.</p></li><li><p>Knowledge of UAE building regulations and safety standards is preferred.</p></li><li><p>Excellent problem-solving, communication, and organizational skills.</p></li><li><p>Ability to work independently and manage multiple projects.</p></li></ul><br><p><strong>Salary &amp; Benefits</strong></p><ul><li><p>Competitive salary (based on experience and qualifications)</p></li><li><p>Company-provided accommodation</p></li><li><p>Transportation</p></li><li><p>Employment visa</p></li><li><p>Medical insurance</p></li><li><p>Annual leave as per UAE Labour Law</p></li></ul><p></p></section>

Role Description This part-time Mechanical Engineer role is a hybrid position based in Dubai, with a mix of on-site work and some work-from-home flexibility. The Mechanical Engineer will support the design, analysis, and optimization of mechanical systems and equipment for educational institutions, training facilities, and related infrastructure. Day-to-day tasks include developing and reviewing mechanical designs, preparing CAD models and technical drawings, performing calculations and simulations, and collaborating with multidisciplinary teams to ensure safety, efficiency, and compliance with local standards. The role involves contributing to small and medium-sized projects, coordinating with project managers on timelines and deliverables, and participating in research and development activities to introduce innovative solutions. The Mechanical Engineer will also assist in documentation, report writing, and providing technical support during installation, testing, and maintenance phases. Qualifications Strong foundation in Mechanical Engineering, with practical experience applying core principles to real-world systems. Proficiency in Machine Design and Computer-Aided Design (CAD) tools for developing detailed models, drawings, and specifications. Experience in Project Management, including planning, task coordination, and meeting project milestones in a multi-stakeholder environment. Research and Development (R&D) skills to evaluate new technologies, improve existing designs, and support innovation initiatives. Bachelor’s degree or higher in Mechanical Engineering or a closely related discipline. Ability to work effectively in a hybrid setting in Dubai, managing both on-site responsibilities and remote tasks. Good communication and collaboration skills, with the ability to present technical information clearly to non-technical stakeholders. Familiarity with relevant standards, safety regulations, and best practices in mechanical systems design; experience with educational or institutional projects is an advantage.

JOB TITLE & JOB DESCRIPTION: SITE STRUCTURAL ENGINEER<br>John R Harris & Partners – Dubai is currently looking for a Sr. Site Engineer - Civil to join our growing Supervision team to support recent project appointments in UAE.<br>The Site Engineer will be responsible for overseeing on-site civil and structural works and ensuring the execution of construction activities aligns with structural design specifications, codes, and safety standards. The role involves close collaboration with architects, contractors, and project managers to ensure timely and quality delivery of structural components across commercial, residential, or infrastructure projects in the UAE.<br>KEY TASKS AND RESPONSIBILITIES:<br>Supervise and inspect on-site structural work for compliance with approved designs, specifications, and local regulations (DM, ADM, etc.). Coordinate with design consultants, contractors, and other site engineers to resolve structural issues. Review and approve civil/structural shop drawings, method statements, and material submittals. Monitor progress and provide regular updates to the Resident Engineer / Project Manager or engineering lead. Conduct site inspections and quality checks on concrete works, rebar placement, formwork, etc. Ensure that construction activities meet health, safety, and environmental (HSE) requirements. Participate in site meetings and communicate project milestones, issues, and resolutions. Assist in preparing progress reports, inspection reports, and structural documentation for authorities when required.<br>REQUIREMENTS:<br>Bachelor’s degree in Civil or Structural Engineering (Master’s is a plus).10-12 years of civil/structural engineering experience, with at least 6 years on UAE projects. Familiarity with UAE building codes and municipality standards (Dubai Municipality, Abu Dhabi DMT, etc.). Knowledge in structural analysis/design software (ETABS, SAFE, STAAD Pro, Auto CAD, Revit) is plus. Strong understanding of concrete and steel construction practices. Excellent communication and site coordination skills. Valid UAE driving license (preferred). SOE membership (advantageous or may be required for authority approvals).<br>PREFERRED SKILLS:<br>Knowledge of local permit procedures and approval processes. Experience in building projects. Fluent in English; Arabic is plus.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Project Execution &amp; Management</p><br><p>1. Lead site execution from inception to completion, ensuring all work aligns with approved drawings, specifications, quality standards, and timelines. </p><ol start="2"><li><p>Monitor daily site activities, work progress, quality, safety, and productivity of labor and subcontractors.</p></li><li><p>Review drawings, proactively identify site issues, coordinate with consultants, and provide practical solutions during execution. </p></li><li><p>Ensure strict compliance with approved drawings, authority regulations, Health, Safety, and Environment (HSE) requirements, and company standards. Planning &amp; Resource Allocation </p></li><li><p>Prepare and monitor project schedules, manpower plans, material requirements, subcontractor work scopes, and site progress reports. </p></li><li><p>Arrange and manage materials, tools, equipment, manpower, and subcontractors required for smooth site operations. </p></li><li><p>Control project costs by efficiently managing labor, materials, subcontractors, and minimizing wastage. Stakeholder &amp; Authority Coordination </p></li><li><p>Serve as the primary liaison ensuring proper coordination between the client, consultant, subcontractors, suppliers, and the internal project team. </p></li><li><p>Coordinate with UAE authorities including Dubai Municipality (DM), DEWA, Civil Defense, and consultants for necessary inspections and approvals. </p></li><li><p>Manage client relations by attending meetings, understanding requirements, managing expectations, and resolving site-related issues. Team Leadership &amp; Reporting </p></li><li><p>Hire, guide, and manage site engineers, supervisors, foremen, and skilled labor. </p></li><li><p>Prepare and submit daily/weekly progress reports, material requests, inspection requests, and other essential project documentation.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: Formally trained Civil Engineer.</p><br><p>Certifications: Must hold a valid Dubai Municipality (DM) approval license.</p><br><p>Logistics: A valid UAE driving license and owning a car is preferred. Experience &amp; Domain Knowledge Regional Experience: Strong, proven construction experience within the UAE.</p><br><p>Project Portfolio: Hands-on experience managing residential villas, office fit-out works, landscaping, swimming pools, and related civil works. </p><br><p>Regulatory Knowledge: Deep understanding of UAE construction procedures, authority inspection processes, and online approval systems. </p><br><p>Network: Possesses a strong existing network of contacts with subcontractors, suppliers, skilled labor teams, and material vendors in the UAE market. Skills &amp; Competencies </p><br><p>Leadership: Proven ability to manage, mentor, and direct various tiers of site personnel and labor. </p><br><p>Communication: Strong client-handling, negotiation, and interpersonal skills. </p><br><p>Work Style: Proactive, hands-on, highly organized, and capable of taking full ownership of site execution. </p><br><p>Availability: Candidates who are immediately available will be given an advantage.</p><p></p></section>

<ul><li><p>Develop, maintain, and monitor detailed project schedules for *interior fit-out and joinery projects*.</p></li><li><p>Prepare baseline programs, detailed execution schedules, look-ahead programs, recovery programs, and revised schedules.</p></li><li><p>Develop project schedules in coordination with Project Managers, Site Engineers, Procurement, Commercial, Design, and other departments.</p></li><li><p>Monitor actual project progress against approved baseline schedules and identify delays and deviations.</p></li><li><p>Collect and validate progress updates from multiple project sites and ensure timely and accurate reporting.</p></li><li><p>Prepare *daily, weekly, and monthly progress reports* for management and project teams.</p></li><li><p>Develop and maintain a *centralized project dashboard* showing the progress, status, delays, critical activities, and expected completion dates of multiple projects in one view.</p></li><li><p>Track key project milestones including design approvals, material submittals, procurement, shop drawings, site execution, inspections, snagging, and handover.</p></li><li><p>Coordinate with Procurement and Project teams to monitor material and procurement schedules against project requirements.</p></li><li><p>Monitor shop drawing, technical submission, material approval, and consultant approval timelines.</p></li><li><p>Identify critical path activities and potential delays and recommend appropriate corrective actions.</p></li><li><p>Conduct *delay analysis and schedule impact assessments* and prepare recovery plans where required.</p></li><li><p>Monitor manpower, resources, productivity, and project requirements against approved schedules.</p></li><li><p>Prepare project performance reports, KPIs, S-curves, progress charts, and other planning reports.</p></li><li><p>Conduct regular progress review meetings with project teams and follow up on agreed actions.</p></li><li><p>Support Project Managers in identifying project risks, constraints, dependencies, and potential schedule impacts.</p></li><li><p>Maintain accurate planning records, schedule updates, progress data, and supporting documentation.</p></li><li><p>Assist in tender planning, preliminary schedules, resource forecasting, and project mobilization planning.</p></li><li><p>Monitor project completion forecasts and highlight potential slippages to management at an early stage.</p></li><li><p>Ensure planning and reporting systems provide accurate and meaningful information for management decision-making.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br><ul><li><p>Bachelor's Degree in *Civil Engineering, Construction Management, or a related field*.</p></li><li><p>*Minimum 3–5 years of UAE experience as a Planning Engineer.*</p></li><li><p>*Interior Fit-Out / Joinery experience is mandatory.*</p></li><li><p>Strong hands-on experience in planning and scheduling for *multiple interior fit-out projects*.</p></li><li><p>Advanced knowledge of *Primavera P6*; MS Project knowledge is an added advantage.</p></li><li><p>Strong proficiency in *Microsoft Excel*, including project trackers, reporting, data analysis, and dashboard development.</p></li><li><p>Proven ability to develop and maintain *centralized dashboards showing multiple project progress in a single view*.</p></li><li><p>Strong knowledge of baseline programs, look-ahead schedules, critical path analysis, progress measurement, delay analysis, and recovery planning.</p></li><li><p>Experience tracking *design, shop drawings, material approvals, procurement, site execution, inspections, snagging, and handover*.</p></li><li><p>Good understanding of interior fit-out project execution, sequencing, dependencies, and resource requirements.</p></li><li><p>Experience preparing *S-curves, progress reports, KPIs, productivity reports, and management dashboards*.</p></li><li><p>Ability to collect, analyze, and validate project data from different teams and sites.</p></li><li><p>Strong coordination skills with Project Managers, Site Teams, Design, Procurement, Commercial, QA/QC, and other departments.</p></li><li><p>Strong analytical, problem-solving, communication, and reporting skills.</p></li><li><p>Ability to manage multiple projects and deadlines simultaneously.</p></li><li><p>Knowledge of *Power BI* or other business intelligence/dashboard tools is an added advantage.</p></li><li><p>UAE Driving License is an added advantage.</p></li><li><p>*Immediate joiners or candidates available on short notice will be preferred.*</p><br></li></ul><p><strong>### Key Requirement</strong></p><p><strong>The ideal candidate must have *hands-on UAE Interior Fit-Out planning experience* and should be capable of independently managing planning and reporting from *baseline schedule → progress tracking → critical path/delay analysis → recovery planning → project forecasting → management dashboard reporting* across multiple projects.</strong></p><p>.</p></li></ul>

<ul><li><p> Bachelor’s Degree in Civil Engineering</p></li><li><p>5–10 years of experience in structural construction / substructure works</p></li><li><p>Mandatory experience with Dubai Municipality approvals for structural construction, including G+ approval-related works</p></li><li><p>Hands-on experience in pump rooms, underground tanks, foundations, retaining structures, and related structural works</p></li><li><p>Strong knowledge of structural drawings, method statements, ITPs, shop drawings, and as-built documentation</p></li><li><p>Experience coordinating with consultants, authorities, site teams, subcontractors, and technical departments</p></li><li><p>Good understanding of quality, safety, planning, and project documentation requirements</p></li><li><p>Strong communication, coordination, and problem-solving skills</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Manage and supervise structural and substructure works on site</p></li><li><p> Coordinate DM approvals and submissions for structural construction activities</p></li><li><p>Review drawings, specifications, method statements, and technical documents</p></li><li><p>Ensure execution of pump rooms, underground tanks, foundations, and related structures as per approved drawings and project requirements</p></li><li><p> Coordinate with consultants, subcontractors, and project teams for inspections, approvals, and technical resolutions</p></li><li><p>Monitor site progress, quality, safety, and compliance</p></li><li><p>Prepare and maintain site records, reports, and project documentation</p></li><li><p> Support timely and efficient delivery of structural works</p></li></ul>

UI Engineer (React)<br>We're looking for a talented UI Engineer (React) to join a high-performing engineering team building modern, scalable web applications. This is an excellent opportunity for a frontend-focused engineer who enjoys creating intuitive user experiences while collaborating closely with backend engineers, product teams, and designers to deliver high-quality digital products.<br>What You'll DoDesign, develop, and maintain responsive, high-performance web applications using React.js. Build reusable, scalable UI components using modern frontend technologies and best practices. Integrate frontend applications with RESTful APIs and manage asynchronous data flows. Implement responsive, mobile-first designs with a strong focus on accessibility and usability. Work closely with UX/UI designers to deliver polished user experiences. Manage application state using Redux Toolkit, Zustand, or Context API. Participate in code reviews, sprint planning, and Agile ceremonies. Collaborate with backend engineers to integrate APIs and troubleshoot application issues. Contribute to frontend architecture, coding standards, and continuous improvement initiatives.<br>What We're Looking For4+ years of commercial experience developing applications with React.js. Strong proficiency in Java Script (ES6+) and Type Script. Experience with modern UI frameworks such as Tailwind CSS, Material UI, or shadcn/ui. Strong understanding of responsive design principles using Flexbox, CSS Grid, and mobile-first development. Solid knowledge of HTML5, CSS3, semantic markup, and WCAG 2.1 accessibility standards. Experience integrating REST APIs and handling asynchronous data. Hands-on experience with state management using Redux Toolkit, Zustand, or Context API. Familiarity with Git, code reviews, and Agile/Scrum development methodologies.<br>Nice to Have Experience with Next.js. Exposure to Node.js (Express or Nest JS) or Python (Fast API or Flask) for backend API development. Basic knowledge of Postgre SQL or Mongo DB. Understanding of authentication and authorization using JWT and OAuth2. Experience with data visualization libraries such as Chart.js, Recharts, or D3.js. Exposure to LLMs, Retrieval-Augmented Generation (RAG), or AI-powered applications. Experience working with Azure or AWS cloud environments. Familiarity with Docker, CI/CD pipelines, and modern Dev Ops practices.<br>Please apply to be contacted with further information.

UI Engineer (React)<br>We're looking for a talented UI Engineer (React) to join a high-performing engineering team building modern, scalable web applications. This is an excellent opportunity for a frontend-focused engineer who enjoys creating intuitive user experiences while collaborating closely with backend engineers, product teams, and designers to deliver high-quality digital products.<br>What You'll DoDesign, develop, and maintain responsive, high-performance web applications using React.js. Build reusable, scalable UI components using modern frontend technologies and best practices. Integrate frontend applications with RESTful APIs and manage asynchronous data flows. Implement responsive, mobile-first designs with a strong focus on accessibility and usability. Work closely with UX/UI designers to deliver polished user experiences. Manage application state using Redux Toolkit, Zustand, or Context API. Participate in code reviews, sprint planning, and Agile ceremonies. Collaborate with backend engineers to integrate APIs and troubleshoot application issues. Contribute to frontend architecture, coding standards, and continuous improvement initiatives.<br>What We're Looking For4+ years of commercial experience developing applications with React.js. Strong proficiency in Java Script (ES6+) and Type Script. Experience with modern UI frameworks such as Tailwind CSS, Material UI, or shadcn/ui. Strong understanding of responsive design principles using Flexbox, CSS Grid, and mobile-first development. Solid knowledge of HTML5, CSS3, semantic markup, and WCAG 2.1 accessibility standards. Experience integrating REST APIs and handling asynchronous data. Hands-on experience with state management using Redux Toolkit, Zustand, or Context API. Familiarity with Git, code reviews, and Agile/Scrum development methodologies.<br>Nice to Have Experience with Next.js. Exposure to Node.js (Express or Nest JS) or Python (Fast API or Flask) for backend API development. Basic knowledge of Postgre SQL or Mongo DB. Understanding of authentication and authorization using JWT and OAuth2. Experience with data visualization libraries such as Chart.js, Recharts, or D3.js. Exposure to LLMs, Retrieval-Augmented Generation (RAG), or AI-powered applications. Experience working with Azure or AWS cloud environments. Familiarity with Docker, CI/CD pipelines, and modern Dev Ops practices.<br>Please apply to be contacted with further information.

Job Purpose<br><br>The Senior Planning Engineer is responsible for leading the development, monitoring, and control of project schedules to ensure timely, cost-effective, and quality delivery of projects.<br>The role provides expert planning, forecasting, and risk analysis to support strategic decision-making and contractual compliance.<br>Acting as a key advisor to project leadership, the Senior Planning Engineer translates complex project data into actionable insights, drives collaboration across departments, and ensures proactive mitigation of potential delays.<br>In addition, the role mentors junior planning staff and contributes to the continuous improvement of planning processes, tools, and methodologies, supporting the organization’s overall performance and long-term growth.<br><br>Roles, Responsibilities, Duties<br>Project Planning & Scheduling Lead the development and maintenance of comprehensive project schedules, ensuring alignment with scope, budget, and strategic objectives. Prepare baseline programs, resource allocation plans, and cash flow projections to support effective project execution. Conduct critical path, scenario, and what-if analyses to anticipate risks and provide actionable solutions. Integrate engineering, procurement, construction, and commissioning activities into a unified master schedule.<br>Monitoring, Analysis & Reporting Monitor project performance against baseline schedules, identifying variances and recommending recovery strategies. Generate accurate and timely progress reports, dashboards, and executive presentations for leadership and clients. Provide early warning indicators of risks, delays, or resource bottlenecks to enable proactive management. Perform variance and trend analyses to forecast project outcomes and drive data-informed decisions.<br>Risk, Claims & Compliance Support claims and Extension of Time (EOT) submissions by conducting delay analysis and preparing comprehensive documentation. Assess and manage scheduling risks, recommending effective mitigation and contingency plans. Ensure compliance with contractual obligations, organizational policies, and regulatory standards. Maintain accurate, audit-ready planning records for contractual and legal purposes.<br><br>Stakeholder Engagement & Collaboration Collaborate with project managers, engineering teams, procurement, and subcontractors to validate and update schedules. Lead planning and coordination meetings, ensuring all stakeholders are aligned on priorities, timelines, and deliverables. Communicate complex scheduling data in clear, concise formats for both technical and non-technical audiences. Build strong relationships with clients and partners by delivering transparent, reliable, and insightful planning information.<br>Leadership, Mentorship & Continuous Improvement:Provide guidance, mentorship, and technical support to junior planning engineers, fostering professional growth and building capability. Champion best practices in planning, scheduling, and project controls to improve organizational efficiency. Drive continuous improvement by identifying process gaps, recommending innovative tools, and enhancing reporting methodologies. Act as a subject matter expert in planning and scheduling, advising senior management on strategic initiatives.<br>Education & Qualification: <br>Bachelor’s degree in Engineering, Construction Management, or related field (Master’s preferred).<br>Professional certifications such as PMI-SP, PSP, or PMP are highly desirable.<br>Additional training in project controls, risk management, or contract administration is an advantage.<br>Proficient in Primavera P6, MS Project, and MS Office Suite.<br>Experience and Skills:<br>Industry Experience (No. of years): Minimum 8–10 years of progressive experience in project planning and scheduling within the construction, infrastructure, facilities management, or engineering sectors. Demonstrated track record of managing schedules on large-scale, multi-disciplinary projects with complex timelines, resource demands, and contractual requirements.<br>Position/functional experience (No. of years): At least 3–5 years in a senior or lead planning role, with hands-on expertise in baseline development, resource loading, critical path analysis, risk management, and claims/delay analysis. Proven ability to mentor junior engineers, lead cross-functional planning teams, and advise project leadership on strategic planning decisions.<br>Competencies and Skills:<br>Planning & Scheduling: Proficient in Primavera P6, MS Project, and MS Office Suite with strong expertise in baseline development, critical path, and resource management.<br>Project Controls & Risk: Skilled in cost–schedule integration, earned value management, delay/claims analysis, and risk mitigation strategies.<br>Contractual Knowledge: Familiar with FIDIC standards, contractual obligations, and industry regulations.<br>Reporting & Analysis: Strong ability to prepare executive dashboards, performance reports, and KPI-driven insights.<br>Leadership & Mentorship: Experienced in guiding junior staff, leading cross-functional teams, and promoting collaboration.<br>Communication & Influence: Excellent verbal, written, and presentation skills with the ability to engage and influence stakeholders.<br>Adaptability & Integrity: Resilient under pressure, adaptable to changing demands, and committed to professional ethics and accountability.

Job Purpose<br><br>The Senior Planning Engineer is responsible for leading the development, monitoring, and control of project schedules to ensure timely, cost-effective, and quality delivery of projects.<br>The role provides expert planning, forecasting, and risk analysis to support strategic decision-making and contractual compliance.<br>Acting as a key advisor to project leadership, the Senior Planning Engineer translates complex project data into actionable insights, drives collaboration across departments, and ensures proactive mitigation of potential delays.<br>In addition, the role mentors junior planning staff and contributes to the continuous improvement of planning processes, tools, and methodologies, supporting the organization’s overall performance and long-term growth.<br><br>Roles, Responsibilities, Duties<br>Project Planning & Scheduling Lead the development and maintenance of comprehensive project schedules, ensuring alignment with scope, budget, and strategic objectives. Prepare baseline programs, resource allocation plans, and cash flow projections to support effective project execution. Conduct critical path, scenario, and what-if analyses to anticipate risks and provide actionable solutions. Integrate engineering, procurement, construction, and commissioning activities into a unified master schedule.<br>Monitoring, Analysis & Reporting Monitor project performance against baseline schedules, identifying variances and recommending recovery strategies. Generate accurate and timely progress reports, dashboards, and executive presentations for leadership and clients. Provide early warning indicators of risks, delays, or resource bottlenecks to enable proactive management. Perform variance and trend analyses to forecast project outcomes and drive data-informed decisions.<br>Risk, Claims & Compliance Support claims and Extension of Time (EOT) submissions by conducting delay analysis and preparing comprehensive documentation. Assess and manage scheduling risks, recommending effective mitigation and contingency plans. Ensure compliance with contractual obligations, organizational policies, and regulatory standards. Maintain accurate, audit-ready planning records for contractual and legal purposes.<br><br>Stakeholder Engagement & Collaboration Collaborate with project managers, engineering teams, procurement, and subcontractors to validate and update schedules. Lead planning and coordination meetings, ensuring all stakeholders are aligned on priorities, timelines, and deliverables. Communicate complex scheduling data in clear, concise formats for both technical and non-technical audiences. Build strong relationships with clients and partners by delivering transparent, reliable, and insightful planning information.<br>Leadership, Mentorship & Continuous Improvement:Provide guidance, mentorship, and technical support to junior planning engineers, fostering professional growth and building capability. Champion best practices in planning, scheduling, and project controls to improve organizational efficiency. Drive continuous improvement by identifying process gaps, recommending innovative tools, and enhancing reporting methodologies. Act as a subject matter expert in planning and scheduling, advising senior management on strategic initiatives.<br>Education & Qualification: <br>Bachelor’s degree in Engineering, Construction Management, or related field (Master’s preferred).<br>Professional certifications such as PMI-SP, PSP, or PMP are highly desirable.<br>Additional training in project controls, risk management, or contract administration is an advantage.<br>Proficient in Primavera P6, MS Project, and MS Office Suite.<br>Experience and Skills:<br>Industry Experience (No. of years): Minimum 8–10 years of progressive experience in project planning and scheduling within the construction, infrastructure, facilities management, or engineering sectors. Demonstrated track record of managing schedules on large-scale, multi-disciplinary projects with complex timelines, resource demands, and contractual requirements.<br>Position/functional experience (No. of years): At least 3–5 years in a senior or lead planning role, with hands-on expertise in baseline development, resource loading, critical path analysis, risk management, and claims/delay analysis. Proven ability to mentor junior engineers, lead cross-functional planning teams, and advise project leadership on strategic planning decisions.<br>Competencies and Skills:<br>Planning & Scheduling: Proficient in Primavera P6, MS Project, and MS Office Suite with strong expertise in baseline development, critical path, and resource management.<br>Project Controls & Risk: Skilled in cost–schedule integration, earned value management, delay/claims analysis, and risk mitigation strategies.<br>Contractual Knowledge: Familiar with FIDIC standards, contractual obligations, and industry regulations.<br>Reporting & Analysis: Strong ability to prepare executive dashboards, performance reports, and KPI-driven insights.<br>Leadership & Mentorship: Experienced in guiding junior staff, leading cross-functional teams, and promoting collaboration.<br>Communication & Influence: Excellent verbal, written, and presentation skills with the ability to engage and influence stakeholders.<br>Adaptability & Integrity: Resilient under pressure, adaptable to changing demands, and committed to professional ethics and accountability.

Job Purpose<br><br>The Senior Planning Engineer is responsible for leading the development, monitoring, and control of project schedules to ensure timely, cost-effective, and quality delivery of projects.<br>The role provides expert planning, forecasting, and risk analysis to support strategic decision-making and contractual compliance.<br>Acting as a key advisor to project leadership, the Senior Planning Engineer translates complex project data into actionable insights, drives collaboration across departments, and ensures proactive mitigation of potential delays.<br>In addition, the role mentors junior planning staff and contributes to the continuous improvement of planning processes, tools, and methodologies, supporting the organization’s overall performance and long-term growth.<br><br>Roles, Responsibilities, Duties<br>Project Planning & Scheduling Lead the development and maintenance of comprehensive project schedules, ensuring alignment with scope, budget, and strategic objectives. Prepare baseline programs, resource allocation plans, and cash flow projections to support effective project execution. Conduct critical path, scenario, and what-if analyses to anticipate risks and provide actionable solutions. Integrate engineering, procurement, construction, and commissioning activities into a unified master schedule.<br>Monitoring, Analysis & Reporting Monitor project performance against baseline schedules, identifying variances and recommending recovery strategies. Generate accurate and timely progress reports, dashboards, and executive presentations for leadership and clients. Provide early warning indicators of risks, delays, or resource bottlenecks to enable proactive management. Perform variance and trend analyses to forecast project outcomes and drive data-informed decisions.<br>Risk, Claims & Compliance Support claims and Extension of Time (EOT) submissions by conducting delay analysis and preparing comprehensive documentation. Assess and manage scheduling risks, recommending effective mitigation and contingency plans. Ensure compliance with contractual obligations, organizational policies, and regulatory standards. Maintain accurate, audit-ready planning records for contractual and legal purposes.<br><br>Stakeholder Engagement & Collaboration Collaborate with project managers, engineering teams, procurement, and subcontractors to validate and update schedules. Lead planning and coordination meetings, ensuring all stakeholders are aligned on priorities, timelines, and deliverables. Communicate complex scheduling data in clear, concise formats for both technical and non-technical audiences. Build strong relationships with clients and partners by delivering transparent, reliable, and insightful planning information.<br>Leadership, Mentorship & Continuous Improvement:Provide guidance, mentorship, and technical support to junior planning engineers, fostering professional growth and building capability. Champion best practices in planning, scheduling, and project controls to improve organizational efficiency. Drive continuous improvement by identifying process gaps, recommending innovative tools, and enhancing reporting methodologies. Act as a subject matter expert in planning and scheduling, advising senior management on strategic initiatives.<br>Education & Qualification: <br>Bachelor’s degree in Engineering, Construction Management, or related field (Master’s preferred).<br>Professional certifications such as PMI-SP, PSP, or PMP are highly desirable.<br>Additional training in project controls, risk management, or contract administration is an advantage.<br>Proficient in Primavera P6, MS Project, and MS Office Suite.<br>Experience and Skills:<br>Industry Experience (No. of years): Minimum 8–10 years of progressive experience in project planning and scheduling within the construction, infrastructure, facilities management, or engineering sectors. Demonstrated track record of managing schedules on large-scale, multi-disciplinary projects with complex timelines, resource demands, and contractual requirements.<br>Position/functional experience (No. of years): At least 3–5 years in a senior or lead planning role, with hands-on expertise in baseline development, resource loading, critical path analysis, risk management, and claims/delay analysis. Proven ability to mentor junior engineers, lead cross-functional planning teams, and advise project leadership on strategic planning decisions.<br>Competencies and Skills:<br>Planning & Scheduling: Proficient in Primavera P6, MS Project, and MS Office Suite with strong expertise in baseline development, critical path, and resource management.<br>Project Controls & Risk: Skilled in cost–schedule integration, earned value management, delay/claims analysis, and risk mitigation strategies.<br>Contractual Knowledge: Familiar with FIDIC standards, contractual obligations, and industry regulations.<br>Reporting & Analysis: Strong ability to prepare executive dashboards, performance reports, and KPI-driven insights.<br>Leadership & Mentorship: Experienced in guiding junior staff, leading cross-functional teams, and promoting collaboration.<br>Communication & Influence: Excellent verbal, written, and presentation skills with the ability to engage and influence stakeholders.<br>Adaptability & Integrity: Resilient under pressure, adaptable to changing demands, and committed to professional ethics and accountability.

Company Description CVSAIR HVAC SYSTEMS, operating as Cvsair Ventilation Technics since 2008, is a trusted partner in the ventilation and energy efficiency sector. The company has played a key role in major projects such as Istanbul Airport, Şenol Güneş Sports Complex Medical Park Stadium, and Expo Antalya, and continues to support many large-scale projects across the country. Cvsair exports its wide range of ventilation products to over 40 countries in Europe, the CIS region, Africa, and the Middle East. Its commitment to quality is demonstrated through certifications including CE, ISO 9001, ISO 14001, OHSAS 18001, Atex, SES, EAC, and membership in AMCA (Air Movement and Control Association International). With specialized expertise in parking ventilation, jet fans, and various industrial fan systems, Cvsair focuses on reliable products, competitive pricing, and long-term customer satisfaction.<br>Role Description This is a full-time remote role for a Mechanical Engineer at CVSAIR HVAC SYSTEMS. The Mechanical Engineer will design and develop ventilation and HVAC system components, including fans and related mechanical assemblies, using modern engineering and CAD tools. Responsibilities include performing calculations, simulations, and performance analyses, preparing technical drawings and documentation, and supporting product customization for specific projects. The role involves collaborating with project teams, contributing to R&D activities for new or improved products, and assisting in project planning, timelines, and coordination with internal and external stakeholders. The Mechanical Engineer will also support quality, safety, and compliance efforts by aligning designs with relevant standards and certifications.<br>Qualifications<br> Strong foundation in Mechanical Engineering with the ability to apply engineering principles to HVAC and ventilation systems. Proficiency in Machine Design, including component selection, mechanical calculations, and reliability considerations. Hands-on experience with Computer-Aided Design (CAD) tools for 3D modeling, drafting, and design documentation. Background in Project Management, including planning, coordination, and tracking deliverables across multidisciplinary teams. Experience in Research and Development (R&D), including prototyping, testing, and continuous product improvement. Relevant bachelor’s degree in Mechanical Engineering or a closely related discipline; advanced degree is an advantage. Knowledge of ventilation, HVAC, or industrial fan systems and familiarity with international standards and certifications is beneficial. Ability to work independently in a remote environment, manage multiple tasks, and communicate clearly in written and spoken English. Strong analytical, problem-solving, and organizational skills, with attention to detail and a commitment to safety and quality.

Role Description The Site Engineer is a full-time, on-site role based in the United Arab Emirates, responsible for overseeing day-to-day construction activities on G+4 building projects. This position includes supervising site work, coordinating with subcontractors and suppliers, and ensuring work is completed according to design drawings, specifications, safety standards, and local regulations. The Site Engineer will monitor progress, prepare daily reports, assist with material take-offs, and support project planning and scheduling. The role also involves conducting quality checks, resolving technical issues on site, and collaborating with project managers, consultants, and the client’s representatives to keep projects on track and within scope. Qualifications Candidates should possess strong technical skills in civil/structural engineering, including understanding of building codes, G+4 construction methods, and interpretation of drawings and specifications.2-4 years of UAE Construction Experience Candidates should possess site management skills such as supervision of workforce, coordination with subcontractors, monitoring daily activities, and enforcing safety and quality standards. Candidates should possess planning and documentation skills, including progress reporting, material tracking, basic quantity estimation, and maintenance of site records. Candidates should possess problem-solving and communication skills for addressing site issues, liaising with project stakeholders, and providing clear instructions to site teams. Bachelor’s degree or diploma in Civil Engineering or a related field is preferred; relevant site engineering experience in building projects (G+4 or similar) in the UAE is an advantage. Knowledge of local building regulations and safety practices, and familiarity with standard construction tools, equipment, and software (e.g., Auto CAD, MS Office) is beneficial. Ability to work full time on-site, adapt to changing project needs, and maintain a professional, inclusive, and collaborative working style.

Position Objectives:The Technical Support Engineer will provide technical, application, and operational support for the Bonya platform during project delivery, testing, rollout, and post-go-live stabilisation. The role will support users, investigate incidents, assist with configuration, monitor platform behaviour, coordinate with development and infrastructure teams, and help ensure smooth adoption of the system.<br>Job Description and Responsibilities Provide first-level and second-level support for Bonya users during UAT, pilot, rollout, and production stabilisation. Log, triage, investigate, assign, and track incidents, service requests, defects, and user queries. Support user access, role assignment, password/SSO issues, workflow issues, and configuration-related support requests. Reproduce reported defects and provide a clear technical analysis to developers and testers. Monitor application behaviour, system logs, job failures, integration errors, and performance issues. Support data import/export activities, report generation, user administration, and routine operational tasks. Assist with deployment validation, smoke testing, release verification, and environment checks. Prepare support guides, FAQs, knowledge base articles, and user support documentation. Participate in hyper care and post-go-live support. Escalate issues to infrastructure, development, database, integration, or security teams as required.<br>Qualification and Required Skills Diploma or Bachelor’s degree in Information Technology, Computer Science, Information Systems, or a related field.3+ years of experience in application support, technical support, systems support, or service desk escalation roles. ITIL Foundation or equivalent service management certification is desirable. Experience supporting ERP, CRM, workflow, service management, or custom enterprise applications. Experience with Odoo or similar enterprise platforms is desirable. Basic understanding of Linux, Postgre SQL, web applications, APIs, logs, user roles, and access control. Experience working with ticketing tools, incident management processes, and SLA-based support. Experience supporting UAT, go-live, and hyper care activities is advantageous.

Senior Procurement Engineer - Civil manages sourcing, vendor evaluation, and contract negotiations for construction materials and subcontractors. Responsibilities include analyzing BOQs, driving cost optimization, and ensuring material deliveries align with project schedules. Candidates typically need a Civil Engineering degree and 7 to 10 years of regional experience<br>Key Responsibilities Sourcing & Prequalification: Find and vet reliable suppliers and subcontractors for civil works (concrete, steel, finishes). Tendering & Evaluation: Prepare RFQs, analyze technical/commercial bids, and build comparative statements. Negotiation & Contracting: Negotiate pricing, payment terms, and delivery schedules to optimize project costs. Cross-Functional Coordination: Collaborate with project managers, planning engineers, and site teams to avoid project delays. Value Engineering: Support cost-saving initiatives and alternative material proposals without sacrificing quality. Key Requirements Education: Bachelor’s Degree in Civil Engineering. Experience: 8-12 years of total construction procurement experience, with regional market expertise. Technical Knowledge: Deep understanding of civil building materials, drawings, BOQs, and local industry standards. Software Proficiency: Strong skills in MS Office (Excel) and familiarity with ERP systems or Oracle/SAP. Soft Skills: Exceptional commercial awareness, communication, and vendor negotiation skills

<ul><li><p>Lead and supervise MEP engineering and site execution activities for power projects, substations, control buildings, and associated facilities.</p></li><li><p>Review MEP drawings, specifications, equipment layouts, shop drawings, method statements, ITPs, and technical submissions.</p></li><li><p>Coordinate MEP works with civil, structural, electrical, architectural, and other engineering disciplines.</p></li><li><p>Supervise installation of HVAC systems, ventilation systems, plumbing, drainage, firefighting, fire alarm, and other building services.</p></li><li><p>Coordinate MEP services for control rooms, substations, administration buildings, workshops, warehouses, utility buildings, and ancillary facilities.</p></li><li><p>Ensure all MEP installations are executed in accordance with approved drawings, specifications, method statements, project schedules, and applicable standards.</p></li><li><p>Review equipment and material submittals and ensure only approved materials are procured and installed.</p></li><li><p>Coordinate with procurement and stores teams to ensure timely availability of MEP equipment, materials, and consumables.</p></li><li><p>Supervise subcontractors and specialist contractors and monitor their productivity, workmanship, resource deployment, and compliance with project requirements.</p></li><li><p>Monitor daily progress and ensure MEP activities are aligned with approved project schedules and milestones.</p></li><li><p>Prepare and review work plans, look-ahead schedules, manpower requirements, and resource plans.</p></li><li><p>Coordinate with consultants, clients, vendors, suppliers, subcontractors, and internal teams to resolve technical and site-related issues.</p></li><li><p>Review RFIs, technical queries, design changes, site instructions, and proposed modifications and provide appropriate technical solutions.</p></li><li><p>Coordinate MEP interfaces and identify clashes between mechanical, electrical, civil, structural, and architectural services.</p></li><li><p>Ensure proper installation of HVAC equipment, ducting, piping, pumps, tanks, ventilation systems, plumbing fixtures, drainage systems, and firefighting equipment.</p></li><li><p>Coordinate installation and testing of fire alarm, fire suppression, fire-fighting, emergency lighting, and other life-safety systems as applicable.</p></li><li><p>Supervise pressure testing, flushing, cleaning, testing, balancing, functional testing, pre-commissioning, and commissioning of MEP systems.</p></li><li><p>Coordinate with electrical and commissioning teams to ensure proper integration of MEP systems with power, control, BMS, and other building systems.</p></li><li><p>Ensure MEP works comply with applicable international standards, UAE regulations, authority requirements, project specifications, and client standards.</p></li><li><p>Conduct regular site inspections to monitor progress, workmanship, quality, and compliance with approved requirements.</p></li><li><p>Coordinate inspections with QA/QC teams and ensure timely closure of inspection requests, punch points, and non-conformance reports.</p></li><li><p>Monitor MEP material consumption, manpower, productivity, equipment utilization, and subcontractor performance.</p></li><li><p>Assist in reviewing quantities, BOQs, variations, additional works, and material requirements.</p></li><li><p>Identify technical, construction, procurement, and interface risks and recommend appropriate mitigation measures.</p></li><li><p>Ensure compliance with project HSE procedures, risk assessments, permit-to-work requirements, and safe working practices.</p></li><li><p>Participate in technical coordination meetings, progress reviews, client meetings, and consultant discussions.</p></li><li><p>Prepare daily, weekly, and monthly progress reports and provide technical updates to project management.</p></li><li><p>Maintain engineering and construction records, inspection reports, testing documentation, approved drawings, commissioning records, and as-built documentation.</p></li><li><p>Support snagging, rectification, testing, commissioning, project completion, and final handover activities.</p></li><li><p>Provide technical guidance and mentoring to junior engineers, supervisors, and site personnel.</p></li><li><p>Support continuous improvement, value engineering, productivity enhancement, and cost optimization initiatives.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering, Electrical Engineering, MEP Engineering, or a related discipline.</p></li><li><p>Typically 7–10 years of relevant MEP engineering and construction experience, preferably within power, EPC, infrastructure, industrial, or large-scale construction projects.</p></li><li><p>Strong experience in multidisciplinary MEP engineering, installation, testing, commissioning, and site execution.</p></li><li><p>Good knowledge of HVAC, ventilation, plumbing, drainage, firefighting, fire alarm, and associated building services.</p></li><li><p>Experience with MEP systems for substations, control buildings, utility buildings, industrial facilities, or infrastructure projects.</p></li><li><p>Ability to read and interpret MEP drawings, schematics, layouts, specifications, equipment schedules, and technical documentation.</p></li><li><p>Strong experience coordinating MEP interfaces with civil, structural, electrical, and architectural disciplines.</p></li><li><p>Knowledge of relevant international standards, UAE regulations, authority requirements, and applicable MEP codes.</p></li><li><p>Experience managing subcontractors, vendors, consultants, and multidisciplinary site teams.</p></li><li><p>Good understanding of QA/QC procedures, ITPs, inspection requirements, testing, commissioning, and handover processes.</p></li><li><p>Knowledge of project planning, scheduling, resource management, material control, and construction methodologies.</p></li><li><p>Proficiency in MS Office and relevant engineering/design software.</p></li><li><p>Strong analytical, technical, communication, coordination, leadership, and problem-solving skills.</p></li><li><p>Ability to manage multiple priorities and deliver MEP works within project timelines, quality standards, and budget requirements.</p></li><li><p>UAE/GCC project experience is preferred.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in power infrastructure, substations, transmission/distribution projects, or major EPC projects.</p></li><li><p>Experience with MEP works associated with HV/EHV substations and control buildings.</p></li><li><p>Exposure to HVAC, fire protection, plumbing, drainage, ventilation, BMS, and building services integration.</p></li><li><p>Experience with UAE utility/client requirements such as DEWA, TAQA/TRANSCO, or equivalent authorities will be an advantage.</p></li><li><p>Experience working with major EPC contractors, engineering consultants, and utility clients.</p></li><li><p>Professional engineering certification or relevant MEP qualification will be an advantage.</p></li></ul>