Embedded Systems Engineer Jobs in UAE
27440 Jobs Found
Save and set alert for similar positionsManage alerts
⚓ SENIOR NAVIGATION & COMMUNICATIONS SYSTEMS ENGINEER ⚓???? Abu Dhabi, UAE????️ Defence???? Immediate Requirement???? Competitive Expatriate Package<br>A leading naval shipbuilding and defence organisation in Abu Dhabi is seeking an experienced Senior Navigation & Communications Systems Engineer (NAVCOM) to support major naval vessel programmes.<br>This position requires extensive experience with shipboard naval navigation and communications systems, ideally covering engineering, integration, installation, commissioning and sea trials.<br>The Role:???? Provide senior technical expertise across naval navigation and communications systems.???? Support the engineering, integration and onboard installation of NAVCOM equipment.???? Manage interfaces between NAVCOM equipment, Combat Management Systems and other shipboard systems.???? Work across communications technologies including HF, VHF, UHF, SATCOM and tactical communications.???? Support navigation systems including radar, GNSS/GPS, INS, gyro, ECDIS and associated bridge equipment where applicable.???? Support RF distribution, antenna systems and shipboard communications architecture.???? Review system specifications, drawings, interface documentation and equipment requirements.???? Troubleshoot complex integration, RF, communications and interface issues.???? Support setting-to-work, commissioning, HAT, SAT and sea trials.???? Coordinate with shipyard engineering teams, combat-system integrators, OEMs and specialist suppliers.<br>Requirements:⚙️ Degree in Electrical, Electronics, Telecommunications, Systems, Marine Engineering or a related discipline.⚙️ Significant experience with naval navigation and/or communications systems.⚙️ Strong knowledge of HF, VHF, UHF and SATCOM.⚙️ Experience with RF systems, antennas and shipboard communications architecture.⚙️ Knowledge of tactical communications, COMSEC and Tactical Data Links advantageous.⚙️ Knowledge of naval navigation systems including radar, GNSS/GPS, INS, gyro and ECDIS advantageous.⚙️ Experience integrating NAVCOM equipment with CMS and wider combat/mission systems highly desirable.⚙️ Strong installation, commissioning and troubleshooting capability.⚙️ HAT, SAT and sea-trial experience strongly preferred.⚙️ Previous experience on frigates, corvettes, OPVs or other naval vessels highly desirable.<br>Candidates must be willing to relocate to Abu Dhabi, UAE.
<ul><li>Perform structural analysis and design of facade systems, focusing on aluminum components and their connections to the building structure.</li><li>Develop detailed design calculations and drawings for curtain walls, window systems, and other architectural aluminum elements, ensuring compliance with codes and standards.</li><li>Collaborate closely with architects, project managers, and contractors to translate design intent into buildable and safe facade solutions.</li><li>Conduct site inspections and reviews to verify the quality of fabrication and installation of facade elements, identifying and resolving any structural discrepancies.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's or Master's degree in Structural Engineering or a related field from an accredited institution.</li><li>Professional Engineer (PE) license or equivalent international certification is highly preferred.</li><li>Minimum of 5 years of progressive experience specifically in the structural design of facade systems, with a strong emphasis on aluminum.</li><li>Demonstrated expertise in structural analysis software and CAD tools, including proficiency in BIM software (e.g., Revit) for facade modeling.</li></ul>
<ul><li><p>Design and implement PLC control logic using Beckhoff TwinCAT 3 software, focusing on efficient and robust code.</p></li><li><p>Configure and commission Beckhoff I/O systems, ensuring seamless data acquisition and control signal integrity.</p></li><li><p>Create intuitive and user-friendly HMI/SCADA interfaces using TwinCAT HMI or other compatible platforms.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Electrical Engineering, Mechatronics, Computer Science, or a related field.</p></li><li><p>Minimum of 5 years of hands-on experience in industrial automation, with a strong focus on Beckhoff systems.</p></li><li><p>Proficiency in Beckhoff TwinCAT 3 (languages like ST, LD, FBD) and related software modules</p></li><li><p>Solid understanding of industrial communication protocols, particularly EtherCAT, and experience with network configuration.</p></li></ul>
Job Purpose OT/ICS Vertical Automation Solution Engineer shall help in the design, implementation, and maintaining the industrial automation control systems IACS in addition to help in create and update related electrical & instrument control systems layout within the OT and industrial environment. In this role, you may help develop and program an automation process, modify existing programming when necessary, and help ensure the company is using the safest and most productive system possible for its business requirement. This includes identification of OT Industrial Automation Control Systems needs aligning them with the organization operational objectives and translating them into secure systems designs. While this position require frequent travel to multiple site locations, they also collaborate with cross-functional teams to integrate and optimize overall operational safety and performance this include but not limited to Safety and Cybersecurity incident and alert response plan based on their close work with operation team and IACS operationunderstanding. Principal Accountabilities Participate in the OT/ICS automation and industrial control systems design analysis against the organization and business requirements and objectives, and identifying the gaps weaknesses, and flaws accordingly. Participate in Controls System Engineering activities with business operation & technical teams including but not limited to secure design specification, system process optimization, system requirements analysis, material selection, etc. Partner with the department's cross-functional team in coordinating with business teams to identify and develop secure design requirements across different OT and IACS. Develop and assure safe and site-specific procedures are being followed during automation project lifecycle from the design, implementation, and maintenance & operational activities, and all measures taken are appropriate and effective. Analyze, compare, and select equipment best suited for various system applications, process, and operations. Support system installation, startup and validation of electrical systems, process control systems and safety instrumented systems. Provide engineering expertise and technical guidance to site maintenance team to perform repairs, design changes, or other corrections as a result of troubleshooting or performance evaluation. Responsible for oversight and recommendation of control system critical spare parts and spare parts management. Identify continuous improvement activities relative to plant automation control systems leveraging new technologies. Support MS OS system troubleshooting, ICS component installation & programming, system maintenance, upgrades/retrofit existing systems, and Process Safety Management PSM efforts. Work with the OT/IACS process business and the associated OT/IACS vendor during troubleshooting and AMC activities. Partner with the department's team member (Network, System, Automation) to address the raised alerts and incidents with the OT/ICS environment and advise on the mitigation plan or work around based on the criticality ensuring efficient root cause analysis is provided and avoiding reoccurrence of alerts and incidents. Participate and maintain updated asset inventory for IACS. Participate in the site safety and cybersecurity risk assessments or gap assessments carried out by internal or external auditor. Good knowledge in IACS systems vulnerability handling and system hardening. Understand and carry out ICS packet analysis for the plant network and translate it into a format that's human-readable for further troubleshooting. Participate in the patch management of the industrial automation control systems. Maintain the program, system images backups for automation control systems. Provide support on-site start-up and shut-down activities in addition to debugging for both hardware and software. Generate reports and dashboards to provide insights into system operation, issues and performance. Ensure site specifications, standards and compliance to expectations are met and that good engineering practices are followed.<br>Additional Principal Accountabilities Experience Bachelor's degree in a technical field, e.g., (Industrial Control Systems Engineering, Computer Engineering, Electrical Engineering, Mechatronics Engineering, or another related technical field with appropriate experience). Minimum 5+ years of experience in industrial automation control systems preferably in the Oil & Gas, Lubricants, Aviation and Critical Infrastructure. Demonstrated years of experience in Industrial Automation Control Systems within global organization, or with IACS OEM and well-known vendors for (SCADA, DCS, SIS, HVAC, RTU, PLC) while having OT/IACS cybersecurity skills is highly preferred. Good Knowledge of Automation process and safety instrumented system industries standards such as IEC61131, SIL and FS standards IEC61508/IEC61511, ATEX/ANSI Directive and ISA standards, while having OT/ICS cybersecurity standard IEC62443 knowledge is highly preferred. Good knowledge of instrument and industrial communication protocols used such as: (Serial Protocols, HART, TCP/IP, UDP, DNP3, Modbus, IEC 61850, S7, OPC, OPC UA, Ether Net/l P, BACnet, Profibus and PROFINET) Certifications such as Network+, Security+ is preferred. One or more of the following certifications is preferred - ISA CAP, ISA/IEC62443 fundamentals, OEMs Expert/Specialist IACS Certificate. Familiarity with Motor Controls, VFD's, network/Ethernet controls Ability to read prints, Auto CAD, interpret and modify electrical & instrument schematics. Working with system backup and recovery solutions like Acronis, Veritas, etc. Working with OEM recommended Endpoint Protection Solution like Trellix, Symantec, etc. Experience in MS OS system troubleshooting and Microsoft Word, Excel, and SQL. Have a hand on working with legacy or recent OS i.e. Windows XP, Windows Server 2012, Windows 7 etc. in addition to Embedded OS. Experience with physical cabling for network communications and control system input/output modules. Possess good verbal and written communication skills. Strong problem-solving and analytical skills. Ability to maintain a good working relationship with the internal and external customers, vendors, and department's team members.
PLEASE SHARE YOUR RESUME ON hr@globaltech.net.in<br>Company Description Global Tech Integrated Systems Pvt. Ltd.® is a trusted marine electronics solutions provider serving commercial vessels, offshore platforms, shipyards, and defense fleets across India, UAE, Singapore, and Egypt. Established in 2009, Global Tech® offers reliable service, fast response, and technical expertise in navigation, communication, and safety systems onboard vessels. With 24/7 support, class-approved engineers, and stocked spare parts, we reduce downtime and keep ships operational. Our services include GMDSS support, radio surveys, and AMC and emergency repairs.<br>Role Description This is a full-time on-site role for a Service Engineer - Marine Electronics and Telecommunication, based in Dubai. The Service Engineer will be responsible for troubleshooting, maintaining, and repairing marine electronics and communication systems. Tasks include field service, technical support, and conducting routine maintenance and emergency repairs on navigation, communication, and safety systems. The engineer will ensure effective communication with clients and provide detailed service reports.<br>Qualifications Troubleshooting and Maintenance & Repair skills Experience in Field Service and Technical Support Strong Communication skills Excellent problem-solving abilities and attention to detail Ability to work in real-world marine conditions Class-approved certifications for marine electronics are a plus Degree in Electronics, Telecommunications Engineering, or related field is beneficial
<ul><li><p>Manage day-to-day operation and maintenance of MEP systems across multiple properties.</p><ul><li><p>Supervise preventive and corrective maintenance activities for HVAC, electrical, plumbing, firefighting, ELV, and building management systems.</p></li><li><p>Coordinate with maintenance teams, contractors, and service providers to ensure timely completion of works.</p></li><li><p>Conduct regular inspections of hotels, high-rise buildings, and other managed properties to identify operational issues and improvement opportunities.</p></li><li><p>Monitor energy consumption and recommend cost-effective and energy-efficient solutions.</p></li><li><p>Ensure compliance with local authority regulations, safety standards, and statutory requirements.</p></li><li><p>Review technical reports, maintenance logs, and inspection records.</p></li><li><p>Assist in preparing annual maintenance budgets and monitor expenses.</p></li><li><p>Handle emergency maintenance situations and ensure minimum downtime of critical systems.</p></li><li><p>Evaluate contractor performance and ensure work quality meets company standards.</p></li><li><p>Support fit-out, renovation, and refurbishment projects related to MEP systems.</p></li><li><p>Maintain asset records, equipment warranties, and service schedules.</p></li><li><p>Coordinate with property management teams and tenants regarding MEP-related issues and resolutions.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree or Diploma in Mechanical, Electrical, or MEP Engineering.</p></li><li><p>Minimum 4–8 years of experience in MEP maintenance and facilities management within real estate, hotels, or high-rise buildings.</p></li><li><p>Strong knowledge of HVAC systems, electrical systems, plumbing, firefighting, and BMS operations.</p></li><li><p>Familiarity with local authority regulations and building compliance requirements.</p></li><li><p>Experience in managing contractors and maintenance teams.</p></li><li><p>Ability to read and interpret technical drawings and MEP layouts.</p></li><li><p>Strong problem-solving and communication skills.</p></li><li><p>Proficiency in MS Office and maintenance management software.</p></li><li><p>UAE driving license is preferred.<br></p></li></ul><p>Preferred Skills</p><ul><li><p>Experience in hospitality and commercial property maintenance.</p></li><li><p>Knowledge of energy management and sustainability practices.</p></li><li><p>Strong leadership and team coordination abilities.</p></li><li><p>Ability to manage multiple properties and priorities effectively.</p></li></ul>
<ul><li>Design and analyze mechanical systems and components, ensuring they meet precise specifications and industry standards.</li><li>Conduct simulations and modeling using CAD software to predict system performance and optimize designs effectively.</li><li>Collaborate with cross-functional teams, including electrical engineers and product managers, to integrate mechanical designs into holistic systems.</li><li>Oversee the prototyping and testing of mechanical components, iterating designs based on empirical data and user feedback.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering or a related field, with a strong foundation in thermodynamics and fluid mechanics.</li><li>At least 3-5 years of relevant industry experience, preferably in automotive, aerospace, or manufacturing sectors.</li><li>Professional Engineer (PE) license or certification in relevant engineering disciplines is highly desirable.</li><li>Experience with advanced CAD software (e.g., SolidWorks, AutoCAD) and simulation tools (e.g., ANSYS, MATLAB) is essential.</li></ul>
<p>Waterproofing Engineer – Job Vacancy</p><p><strong>Position:</strong> Waterproofing Engineer<br><strong>Location:</strong> UAE<br><strong>Employment Type:</strong> Full-Time<br><strong>Experience:</strong> 2–5 years in waterproofing / construction field</p><p>Job Description</p><p>We are looking for an experienced <strong>Waterproofing Engineer</strong> to join our team. The candidate will be responsible for supervising waterproofing works, coordinating with site teams and contractors, ensuring proper application of waterproofing systems, and maintaining project quality standards.</p><p>Key Responsibilities</p><ul><li><p>Supervise and monitor waterproofing works at project sites.</p></li><li><p>Inspect surfaces and ensure proper preparation before waterproofing application.</p></li><li><p>Coordinate with consultants, contractors, site engineers, and workers.</p></li><li><p>Ensure waterproofing materials are applied according to technical specifications and manufacturer recommendations.</p></li><li><p>Conduct site inspections and identify defects, leakage, or application issues.</p></li><li><p>Prepare site reports, inspection reports, and work progress updates.</p></li><li><p>Ensure compliance with project specifications, safety requirements, and quality standards.</p></li><li><p>Provide technical support and recommend suitable waterproofing systems for different applications.</p></li><li><p>Coordinate material requirements with the sales/procurement team.</p></li><li><p>Attend site meetings and resolve technical issues related to waterproofing.</p></li></ul><p>Requirements</p><ul><li><p>Diploma or Bachelor’s Degree in Civil Engineering / Construction or a related field.</p></li><li><p><strong>2–5 years of UAE/GCC experience in waterproofing or construction.</strong></p></li><li><p>Good knowledge of waterproofing systems, materials, and application methods.</p></li><li><p>Experience with <strong>PU, cementitious, bituminous, acrylic, epoxy, and other waterproofing systems</strong> is an advantage.</p></li><li><p>Ability to read drawings and understand project specifications.</p></li><li><p>Good communication and coordination skills.</p></li><li><p>Must have UAE Driving License.</p></li><li><p>Candidates available in the UAE will be preferred.</p></li></ul><p>Salary & Benefits</p><p><strong>Salary:</strong> depending on experience and qualifications.<br>Other benefits will be provided as per UAE labour law and company policy.</p><p><strong>How to Apply:</strong><br>Interested candidates can send their <strong>CV</strong> with the subject <strong>“Waterproofing Engineer – Application”</strong>.</p><p><strong>Desired Candidate Profile</strong></p><p>Age B/W 20 to 35yo Male</p>
<p>We Are Property RAK is a property maintenance and facilities management company based in Ras Al Khaimah.</p><p>We look after villas, commercial buildings and industrial sites across the emirate, from routine maintenance to</p><p>full upgrades.</p><p>We are hiring two MEP Engineers to join our commercial and industrial division as it grows. This is a hands-on</p><p>role across a varied portfolio of sites in Ras Al Khaimah. You will be the person who diagnoses the fault and fixes</p><p>it, not the person who writes it up and passes it on.</p><br><p>What you will be doing</p><ul><li><p>Servicing, repairing and maintaining water-based fire suppression systems</p></li><li><p>Servicing and repairing air conditioning systems</p></li><li><p>General electrical works</p></li><li><p>CCTV and security system installation and maintenance</p></li><li><p>Planned maintenance visits and reactive callouts across commercial and industrial sites</p></li><li><p>Reporting on works completed and flagging further issues before they become failures</p></li><li><br></li></ul><p>What we offer</p><ul><li><p>AED 8,000 per month</p></li><li><p>Company accommodation provided, utilities included</p></li><li><p>Transport to and from site, under 15 minutes each way</p></li><li><p>Medical insurance and visa</p></li><li><p>Company phone</p></li><li><p>Overtime paid</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>5+ years hands-on commercial MEP experience in the UAE or wider GCC</p></li><li><p>Water-based fire suppression systems: installation, servicing and maintenance</p></li><li><p>Air conditioning: servicing, repairs and maintenance</p></li><li><p>General electrical works</p></li><li><p>CCTV and security systems</p></li><li><p>Fault diagnosis and repair on site</p></li><li><p>Valid UAE driving licence</p></li><li><p>UAE residence or transferable visa</p></li><li><p>Good spoken English</p></li></ul>
⚙️ We’re Hiring: Mechatronics Engineer | Automation Technician???? Employment Type: Full-Time???? Level: Mid-Level We are seeking a technically capable Mechatronics Engineer | Automation Technician to support the design, installation, commissioning, maintenance, and optimization of automated machinery and mechatronic systems. The ideal candidate will combine engineering knowledge with hands-on technical skills to maintain reliable equipment, improve production efficiency, and support automation projects from development through operation.???? Key Responsibilities• Design, develop, install, and maintain mechatronic and automated systems.• Support automation projects involving mechanical, electrical, electronic, pneumatic, hydraulic, and control components.• Install, configure, test, and commission automated machinery and production equipment.• Troubleshoot mechanical, electrical, electronic, PLC, sensor, motor, and control-system issues.• Perform preventive and corrective maintenance on automation equipment and machinery.• Diagnose equipment faults and conduct systematic root-cause analysis.• Repair, replace, adjust, and calibrate faulty components and equipment.• Program, modify, and troubleshoot PLC control systems where required.• Configure sensors, actuators, motors, drives, controllers, and other automation components.• Support the integration of robotics, conveyors, vision systems, and automated production equipment.• Read and interpret mechanical drawings, electrical schematics, wiring diagrams, and technical manuals.• Perform equipment alignment, calibration, testing, and functional verification.• Monitor machine performance, equipment availability, downtime, and production efficiency.• Identify opportunities to improve machine reliability, cycle time, productivity, and operational safety.• Assist engineers with the design and implementation of automation upgrades and equipment modifications.• Support factory acceptance testing, site installation, commissioning, and production ramp-up activities.• Conduct inspections and routine checks to identify potential equipment failures before they occur.• Maintain accurate records of maintenance activities, equipment faults, repairs, spare parts, and test results.• Prepare technical reports, maintenance documentation, troubleshooting procedures, and equipment records.• Work closely with production, maintenance, engineering, quality, and operations teams.• Provide technical support to machine operators and maintenance personnel.• Train technicians and operators on equipment operation, maintenance procedures, and basic troubleshooting.• Ensure machinery and automation systems comply with safety procedures and technical standards.• Support machine upgrades, retrofits, process improvements, and automation expansion projects.• Evaluate new automation technologies, components, and equipment to improve manufacturing capabilities.✅ Requirements• Diploma or Bachelor’s degree in Mechatronics Engineering, Automation Engineering, Electrical Engineering, Mechanical Engineering, Electronics Engineering, or a related field.• Previous experience in mechatronics, industrial automation, equipment maintenance, manufacturing, or engineering support.• Strong hands-on knowledge of automated machinery and industrial equipment.• Understanding of mechanical, electrical, electronic, pneumatic, and hydraulic systems.• Experience with PLC systems such as Siemens, Mitsubishi, Omron, Allen-Bradley, or similar platforms is an advantage.• Knowledge of motors, servo drives, variable-frequency drives, sensors, actuators, relays, and control systems.• Familiarity with industrial robots, conveyors, machine vision, or automated production systems is preferred.• Ability to read and interpret electrical schematics, mechanical drawings, wiring diagrams, and equipment manuals.• Experience using multimeters, oscilloscopes, calibration equipment, and other diagnostic tools.• Strong troubleshooting and root-cause analysis skills.• Understanding of preventive maintenance, corrective maintenance, and equipment reliability principles.• Basic programming or scripting knowledge is an advantage.• Familiarity with HMI, SCADA, industrial communication networks, and machine-control systems is beneficial.• Good understanding of workplace safety and industrial equipment safety requirements.• Strong analytical and problem-solving abilities.• Good technical documentation and reporting skills.• Ability to work independently and respond effectively to equipment breakdowns.• Strong communication and teamwork skills.• Ability to work in manufacturing plants, workshops, production floors, or industrial environments.• Willingness to work shifts, overtime, or emergency maintenance support when required.• Relevant technical certifications, PLC certifications, or automation training are advantageous.???? What We Offer• Competitive salary and comprehensive employee benefits.• Hands-on exposure to advanced automation and mechatronic systems.• Professional training in PLCs, robotics, industrial controls, and equipment maintenance.• Opportunities to participate in automation upgrades and manufacturing improvement projects.• Access to modern engineering tools, testing equipment, and automation technologies.• Collaboration with experienced engineers, technicians, production teams, and automation specialists.• Opportunities to develop expertise in robotics, controls, machine vision, and Industry 4.0 technologies.• Support for technical certifications and continuous professional development.• Opportunities to work on equipment installation, commissioning, troubleshooting, and optimization.• Recognition for technical performance, equipment improvements, and successful project delivery.• Career progression toward Senior Mechatronics Engineer, Automation Engineer, Controls Engineer, Automation Specialist, or Engineering Supervisor roles.
⚙️ We’re Hiring: Mechatronics Engineer | Automation Technician???? Employment Type: Full-Time???? Level: Mid-Level We are seeking a technically capable Mechatronics Engineer | Automation Technician to support the design, installation, commissioning, maintenance, and optimization of automated machinery and mechatronic systems. The ideal candidate will combine engineering knowledge with hands-on technical skills to maintain reliable equipment, improve production efficiency, and support automation projects from development through operation.???? Key Responsibilities• Design, develop, install, and maintain mechatronic and automated systems.• Support automation projects involving mechanical, electrical, electronic, pneumatic, hydraulic, and control components.• Install, configure, test, and commission automated machinery and production equipment.• Troubleshoot mechanical, electrical, electronic, PLC, sensor, motor, and control-system issues.• Perform preventive and corrective maintenance on automation equipment and machinery.• Diagnose equipment faults and conduct systematic root-cause analysis.• Repair, replace, adjust, and calibrate faulty components and equipment.• Program, modify, and troubleshoot PLC control systems where required.• Configure sensors, actuators, motors, drives, controllers, and other automation components.• Support the integration of robotics, conveyors, vision systems, and automated production equipment.• Read and interpret mechanical drawings, electrical schematics, wiring diagrams, and technical manuals.• Perform equipment alignment, calibration, testing, and functional verification.• Monitor machine performance, equipment availability, downtime, and production efficiency.• Identify opportunities to improve machine reliability, cycle time, productivity, and operational safety.• Assist engineers with the design and implementation of automation upgrades and equipment modifications.• Support factory acceptance testing, site installation, commissioning, and production ramp-up activities.• Conduct inspections and routine checks to identify potential equipment failures before they occur.• Maintain accurate records of maintenance activities, equipment faults, repairs, spare parts, and test results.• Prepare technical reports, maintenance documentation, troubleshooting procedures, and equipment records.• Work closely with production, maintenance, engineering, quality, and operations teams.• Provide technical support to machine operators and maintenance personnel.• Train technicians and operators on equipment operation, maintenance procedures, and basic troubleshooting.• Ensure machinery and automation systems comply with safety procedures and technical standards.• Support machine upgrades, retrofits, process improvements, and automation expansion projects.• Evaluate new automation technologies, components, and equipment to improve manufacturing capabilities.✅ Requirements• Diploma or Bachelor’s degree in Mechatronics Engineering, Automation Engineering, Electrical Engineering, Mechanical Engineering, Electronics Engineering, or a related field.• Previous experience in mechatronics, industrial automation, equipment maintenance, manufacturing, or engineering support.• Strong hands-on knowledge of automated machinery and industrial equipment.• Understanding of mechanical, electrical, electronic, pneumatic, and hydraulic systems.• Experience with PLC systems such as Siemens, Mitsubishi, Omron, Allen-Bradley, or similar platforms is an advantage.• Knowledge of motors, servo drives, variable-frequency drives, sensors, actuators, relays, and control systems.• Familiarity with industrial robots, conveyors, machine vision, or automated production systems is preferred.• Ability to read and interpret electrical schematics, mechanical drawings, wiring diagrams, and equipment manuals.• Experience using multimeters, oscilloscopes, calibration equipment, and other diagnostic tools.• Strong troubleshooting and root-cause analysis skills.• Understanding of preventive maintenance, corrective maintenance, and equipment reliability principles.• Basic programming or scripting knowledge is an advantage.• Familiarity with HMI, SCADA, industrial communication networks, and machine-control systems is beneficial.• Good understanding of workplace safety and industrial equipment safety requirements.• Strong analytical and problem-solving abilities.• Good technical documentation and reporting skills.• Ability to work independently and respond effectively to equipment breakdowns.• Strong communication and teamwork skills.• Ability to work in manufacturing plants, workshops, production floors, or industrial environments.• Willingness to work shifts, overtime, or emergency maintenance support when required.• Relevant technical certifications, PLC certifications, or automation training are advantageous.???? What We Offer• Competitive salary and comprehensive employee benefits.• Hands-on exposure to advanced automation and mechatronic systems.• Professional training in PLCs, robotics, industrial controls, and equipment maintenance.• Opportunities to participate in automation upgrades and manufacturing improvement projects.• Access to modern engineering tools, testing equipment, and automation technologies.• Collaboration with experienced engineers, technicians, production teams, and automation specialists.• Opportunities to develop expertise in robotics, controls, machine vision, and Industry 4.0 technologies.• Support for technical certifications and continuous professional development.• Opportunities to work on equipment installation, commissioning, troubleshooting, and optimization.• Recognition for technical performance, equipment improvements, and successful project delivery.• Career progression toward Senior Mechatronics Engineer, Automation Engineer, Controls Engineer, Automation Specialist, or Engineering Supervisor roles.
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<b>Job Description</b>Overview<p>The Quality Engineer in Design should possess strong quality technical skills including competence in the Discipline that they will be working. (Civils/Structural, MEP or Architectural) and be an excellent communicator at all levels. Knowledge and experience of implementing and monitoring technical delivery systems/design management systems is essential.</p><br>Your role<p><b>Quality Strategy and Framework</b></p><br><ul><li>Undertake regular review of Legislative and Statutory requirements to determine those applicable and their program impact.</li><li>Assist the ED Directorate in ongoing review and approval of the Design consultants QMS documentation (Quality Manual, Plans, Processes & Guidance and Templates).</li><li>Support the ED Directorates management of QA related records.</li><li>Ensure a culture of project lessons learned and wider program continual improvement, is embedded within the ED Team including DP staff, Designers, Contractors and NEOM championed by the QA team, maximizing opportunities for lessons including internal project completion reviews, and supporting client experience.</li><li>Support the DP innovation strategy.</li><li>Support the preparation of Design Management Review presentation and supporting documentation</li><li>Support the output from Design Management Review is issued and raised recommendations are closed out by allocated parties.</li><li>Bring failings or potential Quality breaches during design phase to the attention of the Head of Quality in Design.</li><li>Act as a focal point and subject matter expert for all design quality related matters in NTL.</li></ul><p><b>Project Management of Design Consultants and Sub-consultants</b></p><br><ul><li>Establishing a right-first-time culture across the client team and all Design Consultants that puts quality at the heart of design project delivery.</li><li>Ensuring that Design Consultants implement appropriate quality management arrangements, supported by the deployment of competent resources, that extend throughout their organizations including sub-consultants ensuring they establish plans for successful delivery.</li><li>Ensuring that Design Consultants quality systems and processes are fully aligned to the contracted requirements and support NEOM’s procedures for project fulfilment.</li><li>Ensuring that NEOM’s auditing of Design Consultants and their sub-consultants quality management arrangements provide overall assurance to the Chief Projects Officer and identify issues for immediate resolution by Design Consultants.</li><li>Ensuring that Design Consultants and their sub-consultants implement appropriate and achievable Stage Gate processes, achieving design outputs consistent with contracted requirements, fully supported with appropriate records.</li><li>Ensuring that the Stakeholders’ (Proponent and Projects teams) requirements to review and witness Design Consultant quality activities are identified and scheduled.</li><li>Ensuring that Design Consultants implement appropriate arrangements for the identification of Design Non-conformance and their subsequent rectification and remediation.</li><li>Leading investigations jointly with Design Consultants into significant design failures and recurring non-conformances, monitoring implementation of corrective and preventive action plans.</li><li>Establishing procedures for the progressive collation of learning amongst the the client team and Design Consultants and monitoring the implementation of subsequent continual improvement.</li><li>Establishing an effective working relationship with the Design Director/s to ensure support and oversight of the ED management of Design Consultants quality.</li><li>Ensuring the appropriate assignment of available resources to support the individual design disciplines.</li><li>Acting as the point of contact for all Design related quality issues.</li><li>Ensuring that the ED corporate quality KPIs are managed and achieved.</li><li>Developing discipline specific quality in design KPIs as required.</li><li>Producing quality in Design reports as required.</li><li>Attending Design Consultant Quality Focus Meetings and audits as required.</li></ul><p><b>Quality Administration</b></p><br><ul><li>Attend as required Quality function team coordination meetings.</li><li>Participate in, and make a positive contribution to, the required external coordination meetings.</li><li>Ensure program staff awareness of Quality related lessons learned opportunities and information through the issue of technical bulletins and case studies.</li></ul><p><b>Quality Reporting</b></p><br><ul><li>Support the issue of ED Quality Reports on a regular basis particularly focusing on NEOM and DP ED (including trend in KPIs).</li><li>Ensure QA team and field teams are reviewing Designers Quality Reports and attending relevant coordination meetings (including trend in KPIs).</li><li>Ensure QA team and field teams are reviewing Sub-Consultants Quality Report and attending relevant coordination meetings (including trend in KPIs).</li><li>Establish, collate, and monitor performance measures based against ED quality objectives, with particular focus on performance of Contractors.</li><li>Trend analysis of data to support reporting and recommendations to the ED Director and Quality Director.</li></ul><p><b>Staffing / Training activities</b></p><br><ul><li>Support ED QA on-boarding and inductions awareness provides suitable information for the audience.</li><li>Support the ED QA section of program training matrix meets Quality needs including course content and feedback.</li><li>Ensure training is being completed in line with competence needs.</li><li>Support the administration of ED QA staff in accordance with program policy.</li><li>Conduct performance evaluations that are timely and constructive.</li><li>Support external best practice QA team networking events and opportunities for the QA Team and wider program</li></ul>About you<p><b>Required Skills/Abilities</b></p><br><ul><li>Ability to work with Senior Managers and Directors.</li><li>Excellent verbal and written communication skills.</li><li>Excellent interpersonal and customer service skills.</li><li>Excellent organizational skills and attention to detail.</li><li>Excellent time management skills with a proven ability to meet deadlines.</li><li>Strong analytical and problem-solving skills.</li><li>Strong supervisory and leadership skills.</li><li>Proficient with Microsoft Office Suite or related software.</li></ul><p><b>Education and Experience</b></p><br><p>Bachelor’s degree (or equivalent) in Business, Engineering, or field related to the role.</p><br><ul><li>Relevant professional membership – MCQI or equivalent.</li><li>Competence in the discipline to which the role is attributed (Civils/Structural, MEP or Architectural)</li><li>10 years plus experience in related senior QA Management role required, a significant amount of which should be working on mega construction programmes and quality in Design.</li></ul><span>Rewards & benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li><span>Tax-free salary.</span></li><li><span>Life insurance coverage.</span></li><li><span>Medical insurance.</span></li><li><span>Annual leave balance.</span></li><li><span>Company gratuity scheme.</span></li><li><span>Discretionary bonus program.</span></li><li><span>Annual flight contribution.</span></li><li><span>Transportation & housing allowances.</span></li><li><span>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</span></li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. </i></span></p><br> </div>
Company Description STREAM HOLDING is a diversified holding company with core activities across construction, energy, engineering services, and investment. Established in 2013 in Abu Dhabi, United Arab Emirates, it brings together multiple affiliates under one strategic umbrella. The company focuses on value-added industry sectors and long-term partnerships with high-performing organizations and leading brands. STREAM HOLDING emphasizes sustainable growth through careful market entry, strategic collaborations, and commercial acquisitions. Its portfolio is built to leverage strong local and international networks, offering team members exposure to complex, high-impact projects.<br>Role Description The Engineer – Transformer and Reactors is a full-time, on-site role based in Dubai, United Arab Emirates. This position is responsible for designing, specifying, and reviewing transformer and reactor systems for power distribution and power system projects. Day-to-day tasks include developing technical drawings and calculations, performing electrical design and system studies, and ensuring compliance with relevant standards and safety regulations. The engineer collaborates with project managers, procurement teams, and site engineers to support installation, testing, commissioning, and troubleshooting of equipment. The role also involves preparing technical reports, evaluating vendor proposals, and contributing to continuous improvement of engineering practices and project execution.<br>We are hiring: Engineer – Transformer & Reactors Engineering Location: Dubai, UAE<br>Project: DEWA Transmission Projects – 132k V & 400k V Substations and Associated Works We are seeking an experienced Electrical Engineer with strong expertise in power transformers and reactors for high-voltage transmission projects. Key Responsibilities:Conduct engineering studies related to power transformers and reactors and provide technically supported recommendations. Prepare transformer and reactor scopes of work for transmission-project tenders. Review tender amendments, technical queries, bidders’ offers, deviations, clarifications, and technical recommendation reports. Review design drawings, technical documents, BIM models, material submittals, and vendor approvals. Ensure compliance with DEWA specifications, approved qualification methodology, project scope, and international standards. Prepare non-compliance notes and support product-conformity and material-approval activities. Attend factory inspections, review compliance statements, document observations, and provide recommendations for dispatch clearance. Participate in technical, design, and progress meetings with contractors, consultants, vendors, and internal stakeholders. Conduct site visits, quality audits, and investigations related to transformer and reactor issues. Support updates to technical specifications, standardization, and lessons-learned initiatives for future projects. Candidate Requirements:Bachelor’s Degree in Electrical Engineering with at least 4 years of relevant experience; or Diploma in Electrical Engineering with at least 7 years of relevant experience. Experience in high-voltage transmission, transformer/reactor design, engineering, testing, and quality control. Experience in 132k V and 400k V substations is preferred. Knowledge of IEEE, IEC, BS, and other applicable international standards. Strong problem-solving and technical report-writing skills. Experience with BIM and Revit is preferred. Interested candidates may share their updated CV at: himalay@streamrecruitment.ae<br>#Hiring #Electrical Engineer #Transformer Engineer #Reactor Engineer #Power Transformer #Shunt Reactor #High Voltage #HV #EHV #132k V #400k V #Transmission #Substation #Power Systems #Testing And Commissioning #DEWA #Dubai Jobs #UAEJobs #Engineering Jobs
<ul><li><p>Manage and supervise HV electrical works, including <strong>power distribution systems, transformers, HV switchgear, power cables, and associated equipment</strong>.</p></li><li><p>Perform and coordinate <strong>testing and commissioning</strong> of HV transformers, power cables, switchgear, protection systems, and other HV equipment.</p></li><li><p>Ensure proper implementation of <strong>HV Permit-to-Work (PTW)</strong> procedures, isolation, switching, and electrical safety requirements.</p></li><li><p>Coordinate HV switching operations, equipment isolation, earthing, and restoration activities in accordance with approved procedures.</p></li><li><p>Review and ensure compliance with approved electrical drawings, method statements, inspection and test plans, and applicable standards.</p></li><li><p>Identify and troubleshoot HV electrical faults and provide appropriate technical solutions.</p></li><li><p>Coordinate with clients, consultants, subcontractors, and relevant authorities during project execution, testing, and commissioning.</p></li><li><p>Ensure all HV works are carried out in accordance with <strong>UAE/GCC regulations, safety standards, and project requirements</strong>.</p></li><li><p>Maintain proper testing, commissioning, inspection, and HV operational records.</p></li><li><p>Support authority inspections, approvals, energization, and handover activities.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Bachelor’s Degree in <strong>Electrical Engineering</strong> or a related field.</p></li><li><p>Minimum <strong>5 years of relevant experience</strong> in HV electrical projects, testing, commissioning, operation, or maintenance.</p></li><li><p>Strong practical experience with:</p><ul><li><p>HV transformers</p></li><li><p>HV switchgear</p></li><li><p>Power distribution systems</p></li><li><p>HV power cables</p></li><li><p>Protection and control systems</p></li><li><p>Testing and commissioning equipment</p></li></ul></li><li><p>Good knowledge and practical experience with <strong>HV Permit-to-Work (PTW)</strong> procedures.</p></li><li><p>Previous experience as an <strong>Authorized Receiving Authority (RA)</strong> or equivalent is highly preferred.</p></li><li><p>Strong knowledge of <strong>HV safety, isolation procedures, earthing, switching operations, protection systems, and electrical standards</strong>.</p></li><li><p>Candidates with current or previous approvals/authorizations from <strong>DEWA, TAQA, or equivalent UAE electrical authorities/utilities</strong> will be highly preferred.</p></li><li><p>Previous <strong>UAE or GCC HV project experience</strong> is preferred.</p></li><li><p>Good communication, coordination, and problem-solving skills.</p></li><li><p>Experience in HV testing and commissioning of transformers, cables, switchgear, and protection systems.</p></li><li><p>Experience with HV energization and shutdown activities.</p></li><li><p>Experience working with UAE electrical authorities/utilities.</p></li><li><p>Valid UAE driving license is an advantage.</p></li></ol>
Senior . NET Engineer Dubai based role Salary - 30000 Dhms per month plus benefits.<br>We are looking for a Senior . NET Engineer (5+ years) to build scalable, high-performance microservices for real-time trading systems.<br>Key Responsibilities Develop C# / . NET Core microservices. Work with multithreading, async programming, and concurrency. Build event-driven systems using Kafka, AWS SQS, or Rabbit MQ. Apply Clean Architecture, Vertical Slice, and CQRS. Optimize systems for low latency and high throughput. Write clean, testable code and perform code reviews. Implement monitoring using Open Telemetry, Prometheus, Grafana, and Kibana. Work with Docker, Kubernetes, CI/CD, and Git. Follow Agile/Scrum practices. Use AI coding tools such as Git Hub Copilot, Claude, Codex, or Cursor. Required5+ years of C# / . NET Core experience. Strong knowledge of concurrency, distributed systems, and microservices. Experience with messaging/event-driven architecture. Experience with Docker, Kubernetes, CI/CD, and observability. Nice to Have Fintech/trading experience. Saga patterns. SQL Server optimization. AWS certifications. Education: Bachelor’s/Master’s in Computer Science or related field.
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
Job Description<br><p>Nair Systems is currently looking for Test Analyst / QA Engineer our UAE operations with the following terms & conditions.</p><br><p>Preferred Qualifications</p><br><p>• ISTQB Certification (preferred).</p><br><p>• Bachelor's Degree in Computer Science, Information Technology, Engineering, Finance, or a related field</p><br><p>Experience</p><br><p>• Minimum 5+ years of Software Testing / Quality Assurance experience.</p><br><p>• Banking or Financial Services experience is mandatory.</p><br><p>• Proven experience working directly with business stakeholders.</p><br><p>• Experience in Wealth Management, Treasury, or Cards domain is highly preferred.</p><br><p>Required Skills & Competencies</p><br><p>• Domain Knowledge</p><br><p>• Strong understanding of Wealth Management, Treasury, and/or Cards business processes and Trade Finance.</p><br><p>• Good understanding of banking operations and system integrations.</p><br><p>• Testing Skills</p><br><p>• Experience in Functional Testing, SIT, UAT, and Regression Testing.</p><br><p>• Ability to review requirements and identify test scenarios.</p><br><p>Terms and conditions</p><br><p>Joining time frame: Immediate</p><br><br><br> </div>
Role: Software Engineer - E-Commerce (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: $180K - $250K/yr<br>Role Overview:We are hiring for one of our clients, seeking a Software Engineer, New Grad (Zara) to work on a full-time basis. The role involves developing scalable backend systems, optimizing algorithms, and collaborating with cross-functional teams to deliver high-performance solutions. You will contribute to mission-critical infrastructure supporting real-time user experiences across global platforms.<br>Key Responsibilities:• Design, develop, and maintain scalable backend services in distributed systems.• Write clean, efficient, and maintainable code following best practices and testing standards.• Optimize system performance through profiling, debugging, and algorithmic improvements.• Participate in code reviews, architectural discussions, and technical design sessions.• Work closely with product managers, designers, and other engineers to ship features.<br>Required Skills & Qualifications:• Proficiency in programming languages such as Go, Python, or Java.• Experience with distributed systems, microservices, or cloud-native development.• Familiarity with databases (SQL and NoSQL) and performance tuning.• Understanding of data structures, algorithms, and system design principles.• Experience with version control systems (e.g., Git) and CI/CD pipelines.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Technology, Information and Internet industry, contributing to high-traffic platforms serving millions of users. You will solve complex technical challenges while growing your skills in a collaborative, results-driven environment.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><span><b>What you will do</b> </span></p><br><p><span>The Project Engineer is a key role directly reporting to Project Manager for Middle East region. You will be based in Dubai and will be a part of a growing team and be responsible for driving the growth of business for Security Systems. </span></p><br><p><span>You will be supporting the project management team on designing and execution of projects. As a member of this team, you will work within a vibrant environment that provides a platform for you to use your experience to support the team with the pre-sales/estimation. </span></p><br><p><span><b>How you will do it</b> </span></p><br><p><span>As an Experienced Project Engineer, you need to have a good knowledge in designing and project execution of physical security systems solution involving Access control/CCTV, Intercom, Network and associated peripherals. You will carry out site surveys for the assigned territory and involve subcontractors for installation works. </span></p><br><p><span>As a Project Engineer you will prepare, schedule, coordinate and monitor the assigned engineering projects, </span></p><br><p><span>Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications and you will interact daily with the clients to interpret their needs and requirements and represent them in the field </span></p><br><p><span><b>What we look for</b> </span></p><br><br><ul><li><span>Bachelor Degree in Electronics and Communication Engineering or Similar Discipline from a reputable university. </span></li></ul><ul><li><span>Minimum of 6-8 years project engineering experience in execution of low voltage physical security systems in UAE. </span></li></ul><ul><li><span>Comprehensive knowledge of large physical security systems including Access Control, CCTV, Intercom, Gate Barrier, Intrusion Systems, etc. </span></li></ul><ul><li><span>Good interpersonal, negotiation, team management and influencing skills. </span></li></ul><ul><li><span>Excellent analytical, strategic conceptual thinking and planning, project costing and execution skills. </span></li></ul><ul><li><span>Determine cost estimate targets during the design and development process, recommending cost effective solutions. </span></li></ul><ul><li><span>Proven ability to produce high quality and impactful professional documents for clients and internal use. </span></li></ul><ul><li><span>Clear understanding of Contractual documents/obligations and preparation of official communications with Client/ Vendors. </span></li></ul><ul><li><span>Excellent client-facing and internal communication skills. </span></li></ul> </div>
Role Description This part-time remote Electrical Engineer role at Wolf's Den Engineering focuses on designing, reviewing, and optimizing electrical systems for diverse projects. Day-to-day responsibilities include developing electrical schematics and layouts, performing calculations for power distribution and load analysis, and ensuring compliance with relevant codes and standards. The role involves collaborating with project managers and other engineers, preparing technical documentation and reports, and supporting design reviews and troubleshooting efforts. The Electrical Engineer will also assist in evaluating new technologies, providing recommendations for system improvements, and communicating clearly with internal and external stakeholders via virtual meetings and digital collaboration tools.<br>Qualifications<br> Demonstrated proficiency in Electrical Engineering and Electricity, with a solid understanding of fundamental principles and safety standards. Experience in Electrical Design, including creating schematics, layouts, and technical documentation using industry-standard tools. Knowledge of Power Distribution systems, including load calculations, panel schedules, and coordination of distribution equipment. Understanding of Power Systems, such as system modeling, fault analysis, and reliability considerations. Bachelor’s degree in Electrical Engineering or a closely related field, or equivalent practical experience. Ability to work independently in a remote environment, manage part-time hours effectively, and meet project deadlines. Strong analytical, problem-solving, and written communication skills; attention to detail in technical work and documentation. Familiarity with relevant electrical codes and standards (e.g., NEC or equivalent) and basic project coordination experience is beneficial.
<p>A reputable company in Dubai is seeking a qualified and motivated Electrical Engineer to support electrical operations, project execution, and maintenance activities.</p>
<p>Key Responsibilities:</p>
<p>Design, review, and supervise electrical installations.</p>
<p>Prepare electrical drawings, load calculations, and technical reports.</p>
<p>Inspect electrical systems and ensure compliance with applicable standards.</p>
<p>Troubleshoot electrical faults and recommend effective solutions.</p>
<p>Coordinate with project teams, contractors, and other engineering departments.</p>
<p>Monitor project progress, quality, and electrical safety requirements.</p>
<p>Requirements:</p>
<p>Bachelor’s Degree in Electrical Engineering.</p>
<p>Relevant experience in electrical engineering, MEP, construction, or maintenance.</p>
<p>Knowledge of electrical systems, circuit protection, and troubleshooting.</p>
<p>Familiarity with AutoCAD and electrical design software is an advantage.<br />
Candidates may send cv via email address hr.krisamp@gmail.com</p>
Receive email alerts for Embedded Systems Engineer Jobs in UAE jobs
You can cancel your email alert at anytime