Heavy equipment mechanical engineer Jobs

The Role<br><br>We are seeking a skilled and field-oriented RF Drive Test Engineer to support a specialized Water Survey Project, focused on evaluating mobile network coverage, quality, and service performance across designated marine and coastal routes.<br><br>The role will involve conducting RF measurements while travelling along predefined water-survey routes, using Nemo Handy and associated drive-test equipment to capture real-time LTE/4G and 5G NR network performance. The engineer will be responsible for ensuring accurate data collection, GPS/route tracking, test execution, identification of coverage gaps and service degradation, and preparation of survey results for further RF analysis and optimization.<br><br>This is a highly field-intensive position requiring strong hands-on drive-test expertise, attention to measurement accuracy, and the ability to operate effectively in marine/outdoor environments.<br><br>Duties And Responsibilities<br><br>Conduct RF water surveys and drive tests across assigned marine, coastal, offshore, waterfront, and other designated water routes. Execute predefined survey routes using Nemo Handy and approved RF measurement devices to capture LTE/4G and 5G NR network performance. Set up, configure, and validate test devices, Nemo Handy measurement profiles, GPS tracking, test scripts, and required network/service configurations before commencing each survey. Perform continuous monitoring and logging of key RF parameters, including RSRP, RSRQ, SINR, RSSI, PCI, serving cell, frequency/band, throughput, latency, handovers, and network technology. Conduct voice and data service testing, where required, to assess the actual end-user experience along the surveyed water routes. Accurately track the GPS coordinates, survey route, timestamps, serving cells, network conditions, and measurement locations throughout each survey. Identify and document coverage gaps, weak-signal areas, poor-quality zones, interference conditions, abnormal handovers, service interruptions, throughput degradation, and other RF performance issues encountered along the route. Monitor changes between serving cells and technologies during vessel movement and identify potential mobility or handover issues. Ensure survey routes are completed according to the approved test plan and that all required route sections and measurement points are covered. Maintain proper naming, organization, storage, and daily backup of all Nemo log files, GPS records, route information, screenshots, test results, and supporting field data. Perform initial field-level validation of collected logs to ensure that survey data is complete and usable before leaving the assigned survey area. Import and process collected measurement files using Nemo Analyzer for detailed RF performance evaluation. Generate route-based coverage plots, KPI analysis, geographical performance views, and other required outputs to highlight network performance across surveyed areas. Correlate RF performance with geographical location to identify specific coordinates or route sections requiring further investigation or optimization. Prepare clear daily survey reports and technical observations, highlighting completed routes, network performance, coverage concerns, abnormalities, and pending/retest areas. Coordinate closely with RF Optimization, Network Planning, Project Management, and field teams to communicate findings and support corrective or optimization activities. Conduct repeat surveys and verification testing where required following network changes or optimization activities. Ensure testing equipment, smartphones, GPS devices, power banks, cables, laptops, and other survey tools remain operational and adequately charged throughout field activities. Follow all applicable project HSE, marine safety, client, and field-work procedures while conducting surveys on boats or other water transport. Immediately report any safety concern, equipment issue, route-access restriction, weather-related constraint, or operational condition that could affect survey completion or data quality.<br><br><br>Requirements<br><br>Bachelor's degree or diploma in Telecommunications, Electronics, Electrical Engineering, Computer Engineering, or a related technical discipline. Practical experience as an RF Drive Test Engineer, RF Optimization Engineer, RF Survey Engineer, or similar telecom field-testing role. Strong hands-on experience with Nemo Handy for RF data logging and field measurements. Practical working knowledge of Nemo Analyzer for log-file processing, KPI analysis, route plotting, and RF performance assessment. Good understanding of LTE/4G and 5G NR radio networks, including network architecture, frequency bands, cells, mobility, handovers, and service performance. Strong understanding of RF KPIs and measurements, particularly RSRP, RSRQ, SINR, RSSI, PCI, throughput, latency, handovers, serving cells, and coverage/quality behaviour. Ability to configure test devices and measurement scenarios based on project requirements, including relevant band/channel/network locking and automated test scripts where required. Experience conducting drive tests, route surveys, coverage verification, benchmarking, or field RF measurements. Ability to interpret RF measurement data and distinguish between coverage, quality, interference, mobility, and service-performance issues. Good knowledge of GPS-based route tracking and geographical RF analysis. Strong attention to detail, particularly regarding log-file integrity, GPS accuracy, route completion, equipment configuration, and field documentation. Ability to prepare structured technical reports and clearly communicate survey observations to RF optimization and project teams. Comfortable working extensively in outdoor and marine environments, including travelling by boat or other water transport for prolonged survey activities. Willingness to work flexible hours depending on survey routes, marine access, operational requirements, weather conditions, and project schedules. Ability to work independently in the field while maintaining close coordination with the project and technical teams. Strong commitment to HSE and marine safety requirements throughout water-survey activities. Previous experience in marine, offshore, coastal, island, or water-route RF surveys will be considered a strong advantage.<br><br><br>Work Location: In person

<p>Key Responsibilities</p><ul><li>Design and develop HVAC, plumbing, and firefighting systems for Construction & interior fit-out projects.</li><li>Coordinate MEP services with architectural and interior design teams.</li><li>Prepare design drawings, load calculations, BOQs, and technical specifications.</li><li>Liaise with consultants, clients, and site teams to ensure design intent is implemented effectively.</li><li>Ensure all designs comply with UAE codes, local authority standards (Dubai Municipality, DCD, DEWA, etc.), and project requirements.</li><li>Conduct site visits and inspections to verify installation quality and design compliance.</li><li>Prepare as-built drawings and participate in testing and commissioning.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree in Mechanical Engineering or related field.</p></li><li><p>8+ years of experience in MEP design, preferably in Construction & interior fit-out projects.</p></li><li><p>Proficient in AutoCAD, Revit, HAP/Carrier software, and other relevant MEP tools.</p></li><li><p>Good knowledge of local authority standards and approval processes.</p></li><li><p>Strong communication and coordination skills.</p></li><li><p>Ability to work under tight deadlines and manage multiple projects simultaneously.</p></li></ul>

Additional Information<br><br>Job Number 26107249<br><br>Job Category Engineering & Facilities<br><br>Location Al Muntazah Street, Sharjah, United Arab Emirates, United Arab Emirates, 79797VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Management<br><br>Job Summary<br><br>Manages all engineering/maintenance operations, including maintaining the building, grounds and physical plant with particular attention towards safety, security and asset protection. Accountable for managing the budget, capital expenditure projects, preventative maintenance and energy conservation. Responsible for maintaining regulatory requirements. Leads the emergency response team for all facility issues.<br><br>CANDIDATE PROFILE <br><br>Education And Experience<br><br> High school diploma or GED; 4 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.<br><br>OR<br><br> 2-year degree from an accredited university in Building and Construction, Engineering, Mechanics, or related major; 2 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.<br><br>CORE WORK ACTIVITIES<br><br>Managing Property Operations and Engineering Budgets<br><br> Supervises Engineering in the absence of the Director of Engineering. Assists in managing the physical plant including equipment, refrigeration, HVAC, plumbing, water treatment, electrical and life safety systems. Maintains and operates equipment at optimum effectiveness, efficiency and safety. Establishes and manages an effective rooms maintenance program. Ensures compliance with all Engineering departmental policies, standards and procedures. Manages department's controllable expenses to achieve or exceed budgeted goals. Select and order or purchase new equipment, supplies, and furnishings. Inspect and evaluate the physical condition of facilities in order to determine the type of work required. Recommend or arrange for additional services such as painting, repair work, renovations, and the replacement of furnishings and equipment. Supervises the day to day operations of Engineering.<br><br>Maintaining Property Standards<br><br> Maintains accurate logs and records as required. Assists in effectively planning, scheduling and evaluating preventative maintenance programs.<br><br>Providing Exceptional Customer Service<br><br> Handles guest problems and complaints effectively. Empowers employees to provide excellent customer service. Displays leadership in guest hospitality by exemplifying excellent customer service and creating a positive atmosphere for guest relations.<br><br>Managing Profitability<br><br> Helps establish priorities for total property maintenance needs. Ensures on-going communication occurs in all areas of responsibility to create awareness of business objectives, awareness of expectations and recognition of exemplary performance.<br><br>Managing and Conducting Human Resources Activities<br><br> Celebrates successes and publicly recognizes the contributions of team members. Establishes and maintains open, collaborative relationships with employees. Ensures employees are treated fairly and equitably. Strives to improve service performance. Provides feedback to employees based on observation of service behaviors. Supervises employee's ability to execute departmental and property emergency procedures. Reviews employee satisfaction results to identify and address employee problems or concerns. Solicits employee feedback. Helps ensure regulatory compliance to facility regulations and safety standards. Ensures disciplinary procedures and documentation are completed according to Standard and Local Operating Procedures (SOPs and LSOPs) and support the Peer Review Process. Ensures property policies are administered fairly and consistently.<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver a meaningful guest experience, we encourage you to explore your next career opportunity with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels & Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Discover more<br><br>IT & Technical Jobs<br><br>Recent Jobs Job Vacancies at Jeremiah Nyagah National Polytechnic...<br><br>Aug 17, 2026<br><br>Accounting <br><br>Job Openings at Jawabu Biashara...<br><br>Aug 17, 2026<br><br>Accounting <br><br>Head, IT Enterprise Architecture...<br><br>Aug 17, 2026<br><br>Telecommunications <br><br>Junior Technical Support Engineer...<br><br>Aug 17, 2026<br><br>Engineering <br><br>Sense Getaways Manager...<br><br>Aug 17, 2026<br><br>Hospitality <br><br>View More<br><br>Jobs<br><br>Browse Jobs Categories Match Companies<br><br>Mechanical Engineer / Electrical Engineer<br><br>Posted:6 hours ago<br><br>Company Details<br><br>Name:UAE Jobs<br><br>Rating: 4.7 (3 reviews) — log in to rate this company<br><br>Industry: Consulting<br><br>Website: https://applydubaijob.com<br><br>Description: applydubaijob.com is a trusted online job platform dedicated to helping job seekers find better career opportunities across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, the wider UAE, and other Middle East countries. The platform provides up-to-date job vacancies from various industries, making… applydubaijob.com is a trusted online job platform dedicated to helping job seekers find better career opportunities across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, the wider UAE, and other Middle East countries. The platform provides up-to-date job vacancies from various industries, making it easier for professionals to discover, apply, and grow their careers in the region. View more View less<br><br>More Jobs from UAE Jobs<br><br>Job Details<br><br>Job Type: Full Time<br><br>Workplace Type: On-site<br><br>Qualification: Diploma<br><br>Job Experience: Mandatory<br><br>Job Location: Dubai, United Arab Emirates<br><br>Closing Date: Undisclosed<br><br>Salary: AED 12,000 - AED 18,000 / month<br><br>Other Pay: Benefits<br><br>Job Category: Engineering<br><br>Job Description<br><br>Eng. Adnan Saffarini Office LLC (EAS) is expanding its engineering team and is seeking experienced Mechanical Engineers and Electrical Engineers to support its consultancy projects across the UAE. This is an excellent opportunity for engineering professionals with strong technical expertise and a solid background in building projects.<br><br>The selected candidates will work on engineering consultancy assignments, ensuring project designs comply with industry standards and UAE regulations while delivering high-quality engineering solutions. Professionals with proven UAE experience in building projects are encouraged to apply.<br><br>Key Responsibilities<br><br> Prepare and review engineering designs, drawings, and technical documentation. Coordinate with project teams, consultants, and clients throughout project execution. Ensure engineering solutions comply with UAE regulations and project specifications. Provide technical support and consultancy services for building projects. Monitor project progress and resolve engineering-related issues. Maintain high standards of quality, safety, and technical compliance.<br><br>Requirements<br><br> Bachelor’s degree in Mechanical Engineering or Electrical Engineering. 6–8 years of relevant professional experience in the UAE. Mandatory experience working on building projects. Strong technical knowledge and consultancy experience. Knowledge of UAE engineering regulations and standards is an advantage. Strong knowledge of: Building engineering systems. Engineering consultancy practices. UAE regulations and technical standards.<br><br>Available Positions<br><br> Mechanical Engineer Electrical Engineer<br><br>781 open positions on Semasocial right now<br><br> 4078 open positions in Dubai, United Arab Emirates 26 posted in the last 7 days<br><br>Contact Information<br><br>Sign in to apply for this job.<br><br>Facebook Linked In X Instagram You Tube Website<br><br>CV Job Description Matcher See how well your CV matches this job and get tips to improve your chances AI Tool<br><br>This tool helps you see how closely your CV matches a job description. It also gives you simple suggestions on what to improve so you have a better chance of getting shortlisted.<br><br>Login or Register to apply for this job<br><br>Similar Jobs<br><br>Junior Technical Support Engineer<br><br>Talent Grid Africa Mombasa County, Kenya<br><br>View Job Aug 17, 2026<br><br>Senior Planning Engineer<br><br>UAE Jobs Abu Dhabi Emirate, United Arab Emirates<br><br>View Job Aug 17, 2026<br><br>Engineering Vacancies 4x<br><br>UAE Jobs Abu Dhabi Emirate, United Arab Emirates<br><br>View Job Aug 17, 2026<br><br>Planning Engineer (4 Positions)<br><br>UAE Jobs Abu Dhabi Emirate, United Arab Emirates<br><br>View Job Aug 17, 2026<br><br>Report This AdBack to Job Listings<br><br>Beware of Fraudsters!<br><br>Never pay anyone for job applications, interview tests, or job interviews. A genuine employer will never ask you for payment under any circumstances.<br><br>Disclaimer & TOS: We do not guarantee the authenticity of every single job posting and are not responsible for any fraudulent activity or misrepresentation by third parties. We are not involved in any stage of the interview or recruitment process and do not charge any fees from job seekers. For further details, please read the rest of the Terms of Service.<br><br> Like Comment

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>The Senior Civil / Structural Design Engineer shall be responsible for providing civil and structural engineering design, analysis, technical review, coordination, and construction support for EPC of industrial, infrastructure, and district cooling plants. The role will ensure that all civil and structural deliverables are safe, practical, cost-effective, technically sound, and compliant with applicable project specifications, international codes, authority requirements, and client expectations from concept design through construction and handover.</p><br>Your role<ul><li>Carry out structural analysis, design, and detailing of reinforced concrete, precast concrete, and be specialized in structural steel along with RCC structures and Pre-cast element design for industrial buildings, district cooling plants, utility facilities, and related infrastructure projects.</li><li>Prepare and review civil and structural designs in accordance with project specifications, client requirements, authority regulations, and applicable international codes and standards, including Dubai Municipality requirements, SBC, IBC, ACI, ASCE, AISC, UBC, and other relevant standards.</li><li>Evaluate structural systems for the applicable design loads and service conditions including loads due to wind, seismic, vibration, equipment, thermal, hydrostatic etc</li><li>Develop structural designs for pipe supports, pipe racks, sleepers, platforms, steel frames, equipment supports, steel-to-steel connections, and steel-to-concrete connections.</li><li>Perform static and dynamic analysis and design of equipment foundations for static and rotating equipment, including foundations for pumps, chillers, FRP / GLS water tanks etc.</li><li>Prepare design calculations and engineering deliverables for buildings, equipment foundations, valve chambers, concrete water tanks, retaining structures, boundary walls, fencing, gates, site security structures, and other related civil works.</li><li>Coordinate civil site development works including grading, roads, drainage, underground utilities, external works, and interface requirements with other engineering disciplines.</li><li>Prepare, review, and update Design Basis Reports, civil and structural design basis documents, architectural design basis documents, technical specifications, scope documents, design calculations, sketches, IFC drawings, and other project deliverables.</li><li>Develop concept, schematic, detailed design, tender, and construction-stage engineering packages, ensuring completeness, constructability, quality, and compliance with project requirements.</li><li>Provide technical design inputs to tendering and estimation teams for EPC and design-and-build district cooling plant bids based on conceptual architectural layouts, plant layouts, and tender documents.</li><li>Review subcontractor technical submissions, including shop drawings, design calculations, method statements, material submittals, inspection and test plans, and related engineering documents.</li><li>Respond to subcontractor technical queries, clarify subcontract scope requirements, obtain technical compliance confirmations, and support the preparation and finalization of technical bid evaluations.</li><li>Prepare technical responses and justifications to client comments and comment response sheets to support approval of design basis documents, calculation notes, IFC drawings, and material submittals.</li><li>Prepare scopes of work for specialist subcontractors and service providers, including geotechnical investigation, topographical survey, and related civil engineering services.</li><li>Review and interpret geotechnical reports, soil investigation results, topographical survey information, and test results, and incorporate relevant findings into the civil and structural design.</li><li>Ensure required inspections and tests are carried out in accordance with project specifications, inspection and test plans, quality procedures, and approval workflows.</li><li>Coordinate with architects, mechanical engineers, electrical engineers, project managers, construction teams, consultants, clients, subcontractors, local authorities, government bodies, and other stakeholders to resolve design interfaces and secure required approvals.</li><li>Prepare and support authority submissions and approvals, including technical discussions with local municipalities and other approving authorities, as applicable.</li><li>Attend technical, progress, quality, safety, tender, and coordination meetings with clients, consultants, contractors, subcontractors, and project stakeholders.</li><li>Provide technical support during construction, respond to site queries, review field issues, and assist construction teams in resolving civil and structural engineering matters.</li><li>Maintain effective communication with project managers and project stakeholders to ensure timely delivery of engineering outputs in line with project schedules, quality requirements, and project objectives.</li></ul>About you<p><b>Minimum Qualifications and Experience</b></p><br><ul><li>Bachelor’s degree in Civil Engineering, Structural Engineering, or a related engineering discipline.</li><li>Professional engineering registration, chartership, or equivalent certification is preferred.</li><li>Minimum 10 years of relevant civil and structural engineering design experience, preferably within EPC, industrial, infrastructure, utility, district cooling, or building projects.</li><li>Demonstrated experience in delivering engineering outputs from concept design through detailed design, tender support, authority approval, construction support, and handover.</li></ul><p><b>Technical Skills and Competencies</b></p><br><ul><li>Strong technical knowledge of reinforced concrete, precast concrete, structural steel, foundation systems, retaining structures, water-retaining structures, and structural connections.</li><li>Proficiency in structural analysis and design software such as ETABS, SAFE, SAP2000, STAAD-Pro, Prokon, and other relevant civil and structural engineering tools.</li><li>Working knowledge of BIM and drafting platforms such as Revit, AutoCAD, and related design coordination tools.</li><li>Ability to independently prepare, check, and review design calculations, technical reports, drawings, specifications, schedules, and engineering documentation.</li></ul><p><b>Preferred Experience and Industry Exposure</b></p><br><ul><li>Experience in civil and structural design for industrial buildings, district cooling plants, utility facilities, process plants, infrastructure works, and related civil structures.</li><li>Experience coordinating with engineering consultants, clients, contractors, subcontractors, local authorities, and government approval agencies.</li><li>Experience working within EPC, design-and-build, or fast-track project environments from tender stage through project execution.</li><li>Experience preparing technical inputs for bids, design presentations, authority submission packages, client approval documentation, and subcontractor technical evaluations.</li><li>Experience working in multicultural, multidisciplinary, and multilingual project environments.</li></ul><p><b>Behavioral Competencies</b></p><br><ul><li>Demonstrates a detail-oriented, analytical, and quality-focused approach to engineering design and technical review.</li><li>Displays strong problem-solving capability and sound engineering judgment when resolving design and construction-related issues.</li><li>Communicates effectively with internal teams, clients, consultants, subcontractors, and authorities.</li><li>Capable of handling pressure while working collaboratively &amp; productively in multidisciplinary project teams while maintaining accountability for assigned engineering deliverables.</li><li>Plans and prioritizes work effectively to meet project schedules, quality requirements, and stakeholder expectations.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Archirodon, having earned its reputation as a reliable and respected international contractor for more than a half century in the Engineering, Procurement and Construction (EPC) market, continues to create value to its stakeholders by executing complex EPC projects worldwide, in recognition of its superior standards of performance. &nbsp;</strong></p><br><p><em>We have an outstanding record in completing major Energy, Marine, Infrastructure and Defense &amp; Security projects around the globe and we pride ourselves on delivering over the years the kind of reliability and trust that the client has the right to expect from a major EPC contractor.</em></p><br><br>Job Description<br><p>​​​​​​We are constantly growing and are currently looking for&nbsp;<strong>Mechanical</strong>&nbsp;<strong>Site Engineer&nbsp;</strong>to join a top qualified and knowledgeable Construction team of our Oil, Gas and Chemicals Division.</p><br><p>Would you like to be part of a dynamic EPC leader with global presence? We’d like to meet you.</p><br><p>Join our worldwide journey. Build on something that matters!</p><br><p><strong>What you will need to do:</strong></p><br><ul><li>Supervise and execute Mechanical&nbsp;site works in accordance with approved drawings, project specifications, and construction schedules.</li><li>Monitor daily site activities to ensure compliance with safety, quality, and project schedule requirements.</li><li>Coordinate with contractors, subcontractors, client representatives, and other disciplines to ensure smooth site execution.</li><li>Review and interpret engineering drawings, technical specifications, and approved method statements.</li><li>Ensure compliance with company HSE policies and Permit-to-Work (PTW) requirements&nbsp;and participate in regular site safety inspections.</li><li>Monitor construction progress, prepare daily and weekly site reports, and provide progress updates to project management.</li><li>Manage manpower, materials, tools, and equipment to ensure efficient site execution.</li><li>Identify, report, and resolve site technical issues, coordinating with the Engineering and QA/QC teams as required.</li><li>Liaise with QA/QC and client representatives to support inspections, approvals, and compliance with project quality requirements.</li><li>Ensure timely completion of assigned works and support project handover activities.</li></ul><p><strong>What you will need to have:&nbsp;</strong></p><br><ul><li>Bachelor's Degree/Diploma in Mechanical Engineering, or equivalent.</li><li>Minimum 5 years of experience in Mechanical site execution within Oil &amp; Gas or EPC construction projects.</li><li>Experience supervising Mechanical&nbsp;site execution within Oil &amp; Gas or EPC construction projects.</li><li>Experience coordinating with subcontractors, client representatives, and multidisciplinary project teams.</li><li>Strong understanding of project specifications, construction standards, HSE requirements, and Permit-to-Work (PTW) systems.</li><li>Familiarity with QA/QC procedures, inspections, and project documentation.</li><li>Ability to read and interpret engineering drawings, technical specifications, and construction documents.</li><li>Proficient in MS Office.</li><li>Good communication, coordination, and problem-solving skills.</li><li>English – Full Professional Proficiency.</li></ul><p><strong>You are someone who:</strong></p><br><ul><li>Strong Leadership and communication skills</li><li>Is able to work both independently and as team leader, exercising professional judgment and coordination skills</li><li>Has excellent organizational skills</li></ul><p><strong>What's in it for you:&nbsp;</strong></p><br><p>Expat package is on the shelf, yet the real joy comes from being a member of smart and passionate teams, within an international leading EPC Group on a mission that matters. We create mega construction projects - literally around the globe - with meaningful impact on the local communities for the years to come. At Archirodon, you will find a proud, productive and human-centric culture, caring for and building on our people and their development!&nbsp;</p><br><p><em>Please note that you will be contacted only in case you are shortlisted for an interview. In the meantime, do not hesitate to stay in touch and keep monitoring&nbsp;our </em><em>open vacancies</em><em> and our </em><em>LinkedIn</em><em>&nbsp;page!&nbsp; Rest assured that your application will be treated with strict confidentiality and under all applicable data privacy regulations.</em></p><br><br>Additional Information<br><p>Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</p><br><br><br> </div>

Job Description<br><br>Job Overview:<br><br>The Senior Structural Engineer uses best practices and knowledge of internal or external issues to improve the Structural (Eng) discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Structural (Eng) discipline. The Senior Structural Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. The Senior Structural Engineer impacts a range of customer, operational, project, or service activities with the Structural (Eng) team and other related teams and ensures that they are working within the appropriate guidelines and policies.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities: <br><br>Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards Direct Engineering team as a Lead Engineer on small projects Apply knowledge and skills to a wide range of standard and nonstandard situations Prepare clear and accurate detailed design calculations and analyses including design reports and procedures Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area Clearly communicate and explain complex issues and work to establish understanding Trains /mentors Engineers Assists MOPEX offices on projects Has a good understanding of the other engineering departments Initiates interface with other disciplines to obtain input for discipline designs Provide engineering support as required Perform engineering checks of drafting Perform engineering checks prepared by others within the discipline Perform design verification through single discipline check and assist with inter-discipline checks (IDC) Prepare MTOs of structures Prepare specifications Prepare subcontract documents Review of vendor data Prepare technical bid evaluations Check designs for operational requirements, constructability, and maintainability Tasks as Engineering Specialist Perform independent computer analyses of structures Prepare details and layouts of structures Prepare structural analyses and reports on calculations or perform specialist tasks (i.e. architectural designs, underground piping designs, complex structures, topsides, jackets, weight control reports, center of gravity reports) Is specialized in several fields (geotechnical, steel, concrete, dynamic calculations, FEM, fatigue calculations, earthquake, jackets, FPSOs, blast, hydrodynamics, architectural, etc.) Is specialized in some design codes (EC, ACI/AISC/API, GOST, etc.) Prepare project engineering guides Coordinate and check the work of engineers and designers Tasks as Lead Engineer Work as Lead Engineer on small projects or act as area lead or deputy lead Responsible for all engineering and design work on small-size projects Control and manage work hours, materials, progress Work in close liaison with the Design Coordinator, area leads, etc. Coordinate with project management Assist Project Manager in:Preparing deliverable control Preparing schedule Preparing progress reports Preparing man-hour and capital expenditure estimates Fill engineering work Give relevant feedback to the department<br>Reports to:<br><br>Project: Lead Engineer/Project Engineer Manager<br><br>Functional: Supervising Department Manager<br><br>Liaises with: All Engineering disciplines, Construction site/Fabrication Group, Safety Dept, Document Control, Procurement<br><br>Group, Subcontractors and Vendors, and Customers<br><br>Supervises: Engineers and Designers<br><br>Qualifications<br><br>Essential Qualifications and Education: <br><br>Bachelor’s Degree or Master’s Degree in Engineering8-15 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design Preferably Registered Professional Engineer or member of professional engineering society as applicable Seasoned knowledge of engineering standards and specifications Good knowledge of engineering software Able to work independently Good working knowledge of English, both oral and written HSE, TQM, and cost-conscious Good technical structural knowledge Good organizer, motivator, and supervisor Keen on improving the effectiveness of the work Show flexibility and ensure proper hand-over with regards to:The reassignment to other departments/construction sites/fabrication yards The replacement of colleagues during illness and holidays The provision of assistance to other colleagues with heavy workloads (also other projects) when possible/desirable The managing/learning of current working methods and software applications Strong working knowledge of many design techniques and analysis methods, and detailed knowledge of the content and application of standards codes and guidelines as applicable<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Six Construct, a subsidiary of the BESIX Group, is the largest Belgian construction company operating in the Middle East. The company combines the efforts of a highly skilled workforce, along with strategic planning and innovative use of technology to overcome the most complex business challenges. Six Construct is a multi-services company that operates in the construction of commercial and residential buildings, sport and leisure facilities, infrastructure and marine-related projects. The company currently employs a workforce of approximately 4,000 in the Middle East, and a total of 10,000 worldwide.</p><br><br>Job Description<br><p><strong>Why This Role Matters</strong></p><br><p>The Mechanical Engineer is responsible for supporting the planning, coordination, and execution of mechanical works across construction projects. The role ensures that mechanical systems are delivered in accordance with project specifications, quality standards, safety requirements, and project schedules. Working closely with project teams, consultants, subcontractors, and stakeholders, the Mechanical Engineer contributes to the successful delivery of high-quality developments while gaining valuable experience in the construction industry.</p><br><p><strong>What You'll Drive</strong></p><br><ul><li>Assist in the planning, coordination, and monitoring of mechanical works on site.</li><li>Review mechanical drawings, specifications, and technical documents to ensure compliance with project requirements.</li><li>Support the execution of HVAC, plumbing, fire protection, and other mechanical systems.</li><li>Coordinate with internal teams, consultants, subcontractors, and suppliers to ensure smooth project execution.</li><li>Monitor work progress and ensure activities are completed according to approved schedules.</li><li>Conduct site inspections and identify potential quality, safety, or technical issues.</li><li>Assist in resolving design, installation, and construction-related challenges.</li><li>Ensure compliance with company quality standards, project specifications, and HSE requirements.</li><li>Prepare technical reports, progress updates, and project documentation.</li><li>Participate in meetings with project stakeholders and support project delivery objectives.</li><li>Contribute to continuous improvement initiatives and engineering best practices.</li></ul><br>Qualifications<br><p><strong>You're a Great Fit If You Have</strong></p><br><p><strong>Education</strong></p><br><ul><li>Bachelor's Degree in Mechanical Engineering or a related discipline.</li></ul><p><strong>Experience</strong></p><br><ul><li>0–3 years of experience in construction, building services, or MEP projects.</li><li>Exposure to construction finishing and mechanical systems is preferred.</li><li>Internship or trainee experience within the construction industry is an advantage.</li></ul><p><strong>Skills &amp; Competencies</strong></p><br><ul><li>Strong communication and teamwork skills.</li><li>Ability to work effectively in a multicultural and fast-paced environment.</li><li>Proactive, detail-oriented, and eager to learn.</li><li>Good understanding of mechanical engineering principles and construction practices.</li><li>Ability to coordinate with multiple stakeholders and manage priorities effectively.</li><li>Commitment to quality, safety, and continuous professional development.</li></ul><p><strong>Additional Requirements</strong></p><br><ul><li>UAE National (required).</li><li>Passionate about contributing to landmark projects that shape the UAE's future.</li><li>Willingness to develop a long-term career within the construction and engineering industry.</li></ul><br>Additional Information<br><p><strong>Why You’ll Enjoy Working with Us</strong></p><br><ul><li>Competitive Benefits</li><li>Positive Workplace Culture</li><li>Opportunity to work with a leading international construction group</li><li>Exposure to large-scale, high-impact projects in the Middle East</li><li>Collaborative, diverse, and professional work environment</li><li>Career growth and development opportunities</li></ul><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> United Arab Emirates </div> </div>

JOB PURPOSE:<br><br>Controls and coordinates professionally to support in supervising, monitoring, and planning for the execution of proper preservation techniques, conducting inspections, and implement necessary repairs treatments of equipment's and materials in warehouse to maintain its original integrity from<br><br>receipt on site up to final issuance to the end user.<br><br>KEY ACCOUNTABILITIES:<br><br>Provides operational excellence in the prepare on implementation, and completion of the preservation strategies and storage methods to prevent damage, deterioration, corrosion, or decay of material / equipment stored or placed in the warehouse.<br><br>Conduct regular inspections of stored items to monitor their condition, identify potential issues, and recommend appropriate maintenance and conservation treatments.<br><br>Identify and implement best and suitable preservation methods / practice to enhance the effectiveness of current methods used for preserving stored items through an adequate preservation on plan and inspection schedule, and the application of specified preservation and finding as<br><br>recommended by the supplier/vendor procedures.<br><br>Carry out in-process monitoring and have control in the field to ensure the preservation technicians/operatives follow the procedure (in terms of chemicals used, percentage dilution & application method).<br><br>Providing guidance to warehouse staff to ensure proper handling, packaging, and storage of items according to preservation strategy.<br><br>Prepare and maintain the detailed preservation reports, check sheet records etc. as per procedure and requirements.<br><br>Timely preservation of materials in line with manufacture's recommendations, and as per the ADNOC policies and procedures for material preservation.<br><br>QUALIFICATIONS EXPERIENCE KNOWLEDGE & SKILLS:<br><br>Minimum Qualification<br><br>Bachelor's degree in mechanical / electrical / Instrument on / Corrosion Engineering or equivalent.<br><br>Proven experience in preservation methods, conservation techniques, and the handling of valuable items within oil & gas industry.<br><br>Knowledge of relevant regulations, standards, and guidelines related to preservation and conservation practices.<br><br>Familiarity with preservation materials, tools, and equipment.<br><br>Effective communication and interpersonal skills to collaborate with warehouse staff and external experts.

<ul><li>Design and implement innovative HVAC systems tailored to complex commercial projects, ensuring efficiency and compliance with industry standards.</li><li>Conduct detailed energy analysis to optimize system performance, reducing operational costs and environmental impact.</li><li>Lead project management efforts, coordinating with multidisciplinary teams to ensure timely delivery and adherence to budgets.</li><li>Perform rigorous calculations and simulations using advanced software to validate system designs and troubleshoot issues.</li><li>Oversee installation and commissioning processes, ensuring systems operate as intended and meet client specifications.</li><li>Develop comprehensive maintenance plans and training programs for facility staff to ensure long-term system reliability.</li><li>Prepare technical documentation, including specifications, reports, and presentations for stakeholders and regulatory bodies.</li><li>Stay current with emerging technologies and industry trends, integrating cutting-edge solutions into designs.</li><li>Conduct site assessments to evaluate existing systems and propose upgrades or replacements based on performance metrics.</li><li>Mentor junior engineers, sharing expertise and fostering professional development within the HVAC team.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering or a related field, with a Master's degree preferred for advanced technical understanding.</li><li>At least 7 years of hands-on experience in HVAC design and project management within commercial and industrial sectors.</li><li>Professional Engineer (PE) license or equivalent certification is highly desirable, demonstrating competency and credibility in the field.</li><li>Familiarity with international HVAC standards and codes, ensuring compliance with local regulations and best practices.</li><li>Proven experience with energy modeling software such as EnergyPlus or TRACE 700 for accurate system performance predictions.</li><li>Excellent communication skills, both verbal and written, to effectively present technical information to diverse audiences.</li><li>Strong analytical skills to assess complex scenarios and develop innovative solutions for system optimization.</li><li>Ability to work collaboratively in a team environment, exhibiting leadership qualities to guide projects and mentor peers.</li><li>Willingness to travel for site visits and project oversight, ensuring hands-on involvement in system implementation.</li><li>Fluency in English; knowledge of additional languages is an advantage, especially in multicultural work environments.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>MAIN OBJECTIVE OF ROLE</strong><br>To provide technical expertise on all Flight Operations Engineering aspects, including aircraft performance, weight and balance, Minimum Equipment List, Aircraft Performance Monitoring, Operations Manuals, fuel conservation, and operating cost optimisation. <br><strong>KEY RESPONSIBILITIES</strong><br><ul><li>Assesses and actions performance related NOTAMs to ensure operational accuracy and compliance</li><li>Monitors and updates the airport database to support performance calculations, and regulatory requirements.</li><li>Assesses flight operations engineering elements of new airports to identify and highlight any potential constraints.</li><li>Designs and validates engine out procedures to optimise take-off and landing performance.</li><li>Provides specialised technical advice and assistance on all aspects of flight operations engineering.</li><li>Drafts performance related documentation, ensuring all relevant updates are captured and published with all supporting material.</li><li>Ensures that all flight operations engineering procedures are compliant, optimised, and updated.</li><li>Updates the ‘Weight and Balance’ documents and ‘Departure Control System’, including aircraft reweighs and new interior configuration.</li><li>Assists in the maintenance and update of the Minimum Equipment List (MEL).</li><li>Provides analysis and guidance on any aircraft performance related non normal procedures, or dispatch under MEL items.</li><li>Conducts aircraft performance, weight and balance, and Boeing OPT staff training.</li><li>Provides key input and support for fleet and route evaluations, taking into account regulatory compliance and aircraft performance.</li></ul> <br><strong>QUALIFICATIONS</strong><br><ul><li>Bachelor's Degree (3+ years)</li><li>Degree in Aerospace or Aeronautical Engineering</li><li>Fluent in English (other languages an advantage)</li><li>Experience in an airline or manufacturer Flight Operations Engineering role required. Experience of freighter W&amp;B preferred. Boeing 787 knowledge and experience preferred.</li><li>Years with qualifications: 7 - 9 years</li></ul> <br><strong>COMPETENCIES</strong><br><ul><li>Customer Focus</li><li>Teamwork</li><li>Effective Communication</li><li>Personal Accountability &amp; Commitment to achieve</li><li>Resilience &amp; Flexibility (Can do attitude)</li></ul> <br><strong>ISR REQUIREMENTS</strong><br>Reads and complies with the ISR policies of the Company and diligently reports any weakness or incidents to the respective Line Manager or the Information Security team. Completes all required ISR awareness sessions and follows associated guidelines in the day-to-day business operations.<br> </div>

Job Title: Sales Engineer Location: Dubai Salary: AED 8,000 - 10,000Job Code: 088/001/482Industry: HVAC / MEP Contracting<br>Job Brief:Our client in the HVAC / MEP contracting industry is seeking an experienced Sales Engineer to drive pump sales across the country by identifying new business opportunities, developing strong client relationships, and providing technically sound pump solutions. The successful candidate will be responsible for understanding customer requirements, promoting pump products, managing project sales, and coordinating with internal teams to ensure successful project execution.<br>The ideal candidate will have a Mechanical Engineering background, proven sales experience in pumps or related mechanical products, strong negotiation skills, and the ability to generate new business through contractors, consultants, and project networks.<br>Job Responsibilities:Generate and manage sales of pump products and solutions across assigned territories and customer accounts. Understand client requirements and recommend suitable pump products and technical solutions based on project specifications and application needs. Identify new project opportunities through market research, consultant and contractor networks, and business development activities. Build and maintain strong relationships with consultants, contractors, developers, and end users to generate repeat business and secure new projects. Prepare technical and commercial proposals in coordination with internal teams and follow up with clients to convert opportunities into confirmed orders. Coordinate with internal departments to ensure timely order processing, project execution, and customer satisfaction. Ensure project-related documents, including product manuals, warranty letters, and technical documentation, are issued accurately and on time. Ensure all project specifications and technical requirements are communicated to the Service Team before Testing & Commissioning (T&C). Monitor project progress and maintain regular communication with clients to provide updates and resolve any commercial or technical concerns. Maintain accurate records of sales activities, customer interactions, project status, and business opportunities while consistently achieving assigned sales targets.<br>Job Requirements:Bachelor's Degree in Mechanical Engineering. Minimum 5 years of proven experience as a Sales Engineer, preferably within the pump, HVAC, MEP, or related engineering industry. Strong understanding of pump products, applications, and project sales processes. Experience working with consultants, contractors, developers, and end users within the region. Excellent negotiation, communication, and relationship management skills. Ability to understand project specifications and recommend appropriate technical solutions. Strong commercial awareness with the ability to identify and develop new business opportunities. Self-motivated, target-driven, and capable of managing multiple customer accounts simultaneously. Valid driving license is mandatory.

Job Description<br><br>About Us<br><br>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.<br><br>Responsibilities<br><br>Champion the Project Safety culture, behaviors and engagement activities. Identifying, evaluating, and resolving Piping Engineering issues. Review and approve within the specified approval durations, the Contractor key deliverables and other works within the Mechanical (Piping) discipline, ensuring compliance with Mechanical (Piping)design requirements and the Licensors’ PDP’s, which involves the interpretation and review of calculations, specifications, plans, investigations, surveys, structures, system or equipment with relatively few complex features. Review and approve the following Contractor’s deliverables:Equipment design and development. System design, including concept sketches and layouts. Testing of materials. Specifications and design calculations. Designs, drawings and data by other Contractors’ or by Vendors. Engineering studies and reports. Material Requisitions for equipment & materials Material quantity estimates. Review and approve key design documents from Vendors, equipment manufacturers or Subcontractors and prepare comments and recommendations incorporating any comments received from the Owner. Attend technical meeting with Owner, Licensor, Contractor and Vendors. Attend all Project technical sessions by the Contractor such as: Design Review Meetings, 3D Model Review Meeting, Constructability, SIL, EIA, HAZOP and HAZID etc. Ensure quality and accuracy of EPC Contractor’s Mechanical (Piping) Engineering design activities, system integration, and design selection. Supervise and manage the review and approval of Contractor’s work, ensuring compliance with Owner and Project specifications, relevant codes and standards, and industry best practices. Coordinate the required Engineering participation in the development and analysis of various design options and business models. Contribute input and expertise in the development and analysis of various design options and business models to ensure design optimization and validation for the Owner. Coordinate the technical guidance required to develop new specifications and update existing specifications in line with Owner requirements. Coordinate other discipline Engineer’s participation in layout reviews, design reviews, and technical workshops. Influence Facilities and Equipment design optimization. Provide technical assistance and coordination with other discipline Engineers. Coordinate technical reviews and analysis during vendor prequalification, bid evaluation, and performance evaluation. Coordinate the review of technical bid submissions and perform technical bid analysis. Qualifications And Experience<br><br>A bachelor’s degree in relevant engineering or equivalent from an accredited university with a minimum of fifteen (15+) years of relevant experience in the Oil & Gas or Petrochemical industry, including minimum five (5) years (preferred) in GCC region. Must have at least three (3) years of experience in similar position for international major Oil & Gas or Petrochemical projects. PMC & ADNOC experiences are required. Required experience in FEED & EPC Phases of Oil/Gas Projects. Offshore project experience is required <br><br>Moving forward together<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.<br><br>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.<br><br>Job Details<br><br>Role Level: Not Applicable Work Type: Full-Time Country: United Arab Emirates City: Abu Dhabi Company Website: https://www.worley.com Job Function: Engineering Company Industry/<br><br>Sector: Other<br><br>What We Offer<br><br>About The Company<br><br>Searching, interviewing and hiring are all part of the professional life. The TALENTMATE Portal idea is to fill and help professionals doing one of them by bringing together the requisites under One Roof. Whether you're hunting for your Next Job Opportunity or Looking for Potential Employers, we're here to lend you a Helping Hand.<br><br>Report<br><br>Disclaimer: talentmate.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at abuse@talentmate.com.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>•</span>Identify, evaluate, and manage suppliers in China for raw materials, components, and manufacturing equipment, ensuring quality, cost, and lead-time targets are met.<br></p><br><p><span>•</span>Negotiate pricing, payment terms, and contracts directly with Chinese manufacturers and trading companies and build long-term supplier relationships.<br></p><br><p><span>•</span>Plan and manage international freight (sea and air) from China, coordinating with forwarders to optimize cost and transit time.<br></p><br><p><span>•</span>Handle or coordinate import documentation, HS code classification, duties, and customs clearance for shipments into the UAE.<br></p><br><p><span>•</span>Read technical drawings, specifications, and datasheets to accurately source parts and communicate technical requirements to suppliers.<br></p><br><p><span>•</span>Support off-road vehicle and EV manufacturing operations through timely, cost-effective sourcing of components and materials.<br></p><br><br><span>Requirements</span><p><span>•</span>Engineering Degree or Diploma in Mechanical, Electrical, Industrial, or a related field.<br></p><br><p><span>•</span>Minimum 3 years of experience in procurement, sourcing, or supply chain — preferably involving China-based suppliers.<br></p><br><p><span>•</span>Working knowledge of UAE import procedures, HS code classification, duties, and customs clearance.<br></p><br><p><span>•</span>Ability to read and interpret technical drawings, specifications, and datasheets.<br></p><br><p><span>•</span>Mandarin proficiency (spoken and written) preferred for direct supplier communication and negotiation.<br></p><br><p><span>•</span>Arabic language ability is an added advantage for local vendor, customs, and stakeholder coordination.<br></p><br><br> </div>

Job Responsibilities<br>Site Assessment: Conduct detailed site surveys, assess MEP systems and assets, evaluate their operational condition, and identify outstanding technical requirements. Manpower Planning: Lead FM mobilization and define manpower requirements, competencies, shifts, roles, and responsibilities to ensure operational readiness. Process Implementation: Implement, and continuously improve FM processes, SOPs, workflows, PPM procedures, reactive maintenance processes, escalation procedures, and operational standards to ensure consistent and efficient service delivery. CAFM Management: Ensure accurate configuration and scheduling of PPM and reactive maintenance activities through CAFM, including effective tracking and utilization of manpower, materials, and maintenance resources. Contractor Coordination: Understand building systems and asset requirements and coordinate with contractors and specialist service providers for proper asset takeover, system demonstrations, testing, handover, and timely rectification of defects. Materials & Spares Management: Identify critical spares, consumables, tools, and equipment while supporting material planning, procurement, inventory control, and cost optimization. Technical Team Training: Train the technical team, conduct system and equipment training, facilitate knowledge transfer, and ensure the team is fully prepared for safe and effective operations. HSE, Compliance & Reporting: Understand and approve PTWs, ensure HSE and statutory compliance, maintain required documentation, and prepare technical, performance, lifespan, and energy reports with improvement recommendations.<br>Qualification - B. E or Diploma in Mechanical or Electrical Engineering (IOSH or NE-BOSH certification Will be an added advantage) Required experience – 5 to 7 Years in FM filed<br>Driving License- Mandatory

JOB DESCRIPTION FOR PROJECT ENGINEER<br>Role Summary We are looking for a proactive and results-driven Project Engineer to manage and execute residentialbuilding projects (G+4). The role is responsible for ensuring projects are delivered on time, within budget, and as per quality andsafety standards. The candidate will coordinate closely with site teams, subcontractors, procurement,and management to ensure smooth execution. This is a hands-on role requiring strong control over site activities, planning, and coordination.<br>Scope of Activities1. Execute works as per drawings and specifications Ensure all site activities are carried out strictly as per approved drawings and technicalrequirements.2. Check levels, alignment, and measurements Verify accuracy of dimensions, levels, and workmanship at site.3. Ensure use of latest drawings Use only approved/latest drawings and remove outdated drawings from site.4. Raise RFIs and follow up Identify technical gaps, raise RFIs, and ensure timely resolution.5. Coordinate daily site activities Work closely with foremen, subcontractors, and labour teams for smooth execution.6. Ensure material and resource availability Plan and confirm availability of materials, tools, and equipment in advance.7. Report daily progress and issues Provide regular updates to Project Manager on progress, delays, and site issues.8. Manage inspections and quality checks Prepare IRs/MIRs, coordinate inspections, and ensure closure of comments.9. Ensure proper material handling and workmanship Monitor curing, protection, and correct usage of materials.10. Ensure safety compliance on site Enforce PPE usage, report unsafe practices, and support safety measures.11. Maintain site records and documentation Maintain site diary, progress reports, measurements, and photographic records.12. Maintain activity logs Record concrete works, steel works, and material delivery logs.<br>Candidate Requirements Degree/Diploma in Civil Engineering Minimum 2 years of experience in construction projects in UAEMandatory: Proven experience in residential building projects (G+4) Experience / capable in handling multiple small-to-mid projects (AED 2M – 4M range) Good understanding of project planning and site execution activities Familiarity with Auto CAD

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Design, review, and supervise mechanical works including HVAC, Plumbing, Fire Fighting, and other MEP systems.</p><p>Prepare technical submittals, method statements, and material approvals.</p><p>Coordinate with consultants, clients, subcontractors, and site teams.</p><p>Monitor project progress and ensure work complies with project specifications, quality standards, and safety requirements.</p><p>Review shop drawings and provide technical support during project execution.</p><p>Attend site inspections and project coordination meetings.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Bachelor's Degree in Mechanical Engineering.</p><p>Minimum 3–5 years of UAE/GCC experience in MEP construction projects.</p><p>Strong knowledge of HVAC, Plumbing, and Fire Fighting systems.</p><p>Proficient in AutoCAD and Microsoft Office (Revit knowledge is an advantage).</p><p>Excellent communication, problem-solving, and coordination skills.</p><p>UAE Driving License is an advantage.</p><p>Immediate joiners are preferred</p></div>

Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.<br><br>At The Exploration Company, we are developing next-generation space transportation systems, including a lunar lander capable of precision landing and reusable operations. To support this effort, we are establishing a dedicated remote test site in the United Arab Emirates to perform hot-fire propulsion testing and hopper flight demonstrations.<br><br>As a Lunar Lander Test Bench Development Engineer, you will lead the design, development, and deployment of this new test facility from concept to operations. The role combines propulsion test infrastructure design, cryogenic fluid systems engineering, civil infrastructure coordination, and end-to-end project execution in a remote environment.<br><br>This position requires periodic travel to the UAE during site development, commissioning, and operations phases.<br><br>Key Responsibilities / Tasks<br><br>In this role, your responsibilities will evolve with project maturity. Day-to-day duties will include:<br><br>Test Site Development<br><br>Define and synthesize system-level requirements for a remote lunar lander test site supporting hot firing and hopper flight testing. Lead the design and implementation of the complete facility, including ground infrastructure and utilities. Specify and implement propellant and pressurization systems including Liquid Oxygen, Liquid Methane, Helium, and Nitrogen. Design infrastructure enabling autonomous operation of a remote site (power generation, storage, logistics, safety systems).<br><br>Fluid and Cryogenic Systems Engineering<br><br>Develop P&IDs for propulsion test facilities and associated ground support equipment. Design, size, and select components for cryogenic and high-pressure fluid systems. Ensure safe handling, storage, and distribution of cryogenic propellants and pressurants.<br><br>Infrastructure and Civil Engineering Coordination<br><br>Define facility layout, foundations, structural interfaces, and site infrastructure requirements. Coordinate with civil engineering partners to implement test stands, safety perimeters, and support buildings.<br><br>Safety, Automation, and Operations<br><br>Define and implement automation architectures for test operations and facility control, including safe connections with the vehicle to test. Develop and validate safety-critical systems protecting personnel, hardware, and environment. Perform hazard analyses (FMEA, HAZOP, risk assessments) and implement mitigation measures. Develop test procedures, operational concepts, and commissioning plans.<br><br>Project Leadership<br><br>Lead end-to-end development of the test facility including design, procurement, manufacturing, installation, commissioning, and operations readiness. Manage technical interfaces with internal teams, customers, and external suppliers. Perform trade-off analyses to optimize performance, safety, cost, and schedule. Support on-site deployment, integration, and test campaigns in the UAE.<br><br>What We Would Love to See From You<br><br>Degree in aerospace engineering, mechanical engineering, energy systems, or a related field.5+ years of experience in propulsion test facilities or hot-fire test bench development. Strong expertise in fluid systems engineering, including cryogenic propellants. Experience designing or operating ground support equipment for rocket propulsion systems. Knowledge of automation systems and safety-critical control architectures for industrial or test environments. Experience coordinating infrastructure or facility development in industrial or remote environments. Demonstrated project management capability across multidisciplinary engineering activities. Hands-on engineering mindset with strong problem-solving ability. Excellent communication skills and ability to work across international teams. Willingness to travel to and work periodically in the United Arab Emirates.<br><br>Why you should join us!<br><br>What makes us special here at The Exploration Company and why we think you will enjoy working here is:<br><br>We’re Agile - we make decisions fast whilst keeping our goals and systems in mind We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge? <br><br>We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.<br><br>The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable. <br><br>All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.<br><br>If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.

<p>Responsibilities: Prepare detailed design, shop, coordination, and as-built drawings for security systems. Develop and update drawings using AutoCAD. Prepare layouts, schematics, riser diagrams, single-line diagrams, equipment details, and installation drawings. Coordinate security system drawings with architects, MEP consultants, civil contractors, and other stakeholders. Ensure compliance with project specifications, local authority regulations, and industry standards. Prepare drawing submissions for consultant and client approvals. Incorporate design changes, RFIs, site instructions, and consultant comments into drawings. Support project engineers and project managers during design reviews and technical discussions. Conduct site surveys and verify site conditions against approved drawings. Maintain drawing registers and document control records. Prepare as-built documentation upon project completion.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 5 years of experience in preparing security system drawings for large construction projects. Proven experience working on high-rise buildings, commercial complexes, airports, seaports, industrial facilities, data centres, or critical infrastructure projects. Strong knowledge of security system design principles and installation practices. Ability to interpret technical specifications, tender documents, and design criteria.</p>

<p>Here's a refined Required Skills & Qualifications section for a QA/QC Engineer – Metal Fabrication & Cladding (UAE): Required Skills & Qualifications • Bachelor's degree in Mechanical Engineering, Civil Engineering, or a related discipline. • Minimum of 3–5 years of QA/QC experience in metal fabrication and cladding projects within the UAE. • Strong experience in preparing, submitting, and following up on Material Inspection Requests (MIRs) and Work Inspection Requests (WIRs).</p><p>• Proven ability to conduct quality inspections throughout fabrication and installation activities. • Experience in identifying non-conformities, raising Non-Conformance Reports (NCRs), and ensuring timely implementation and close-out of corrective actions. • Thorough understanding of quality control procedures, inspection and test plans (ITPs), and project quality documentation. • Ability to interpret engineering drawings, specifications, and approved method statements.</p>