Plumbing Engineer - Abu Dhabi UAE

<ul><li><p>Develop, review, and implement HSE Plans, Procedures, and Method Statements/Risk Assessments (MSRA).</p></li><li><p>Conduct regular site HSE inspections and monitoring activities to ensure compliance with project requirements.</p></li><li><p>Prepare HSE inspection reports, observations, and corrective action recommendations.</p></li><li><p>Review HSE documentation and monitor compliance with applicable standards and regulations.</p></li><li><p>Ensure adherence to TAQA, ADOSH, and other regulatory HSE requirements and industry best practices.</p></li><li><p>Conduct workplace inspections to identify hazards and implement preventive measures.</p></li><li><p>Investigate accidents, incidents, and near misses to determine root causes and recommend corrective actions.</p></li><li><p>Deliver safety awareness and training sessions on emergency response, hazard communication, ergonomics, and other relevant HSE topics.</p></li><li><p>Coordinate effectively with project teams, contractors, and stakeholders to maintain a strong safety culture.</p></li></ul><p><strong>Key Competencies</strong></p><ul><li><p>Strong knowledge of TAQA and ADOSH HSE requirements.</p></li><li><p>Excellent hazard identification and risk assessment skills.</p></li><li><p>Effective inspection, auditing, and compliance monitoring capabilities.</p></li><li><p>Strong reporting, documentation, and analytical skills.</p></li><li><p>Excellent communication, coordination, and leadership abilities.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education</strong></p><ul><li><p>Bachelor’s Degree in any discipline.</p></li></ul><p><strong>Experience</strong></p><ul><li><p>6–8 years of relevant HSE experience.</p></li><li><p>Minimum 3 years of experience in <strong>TAQA projects</strong>, specifically within <strong>power distribution, utilities, or infrastructure projects</strong>.</p></li></ul><br><p><strong>Professional Certifications</strong></p><ul><li><p>Diploma in Occupational Safety & Health (OSH).</p></li><li><p>NVQ/Level 6 Occupational Health & Safety Qualification.</p></li><li><p>NEBOSH Certification.</p></li><li><p>ISO 45001 Lead Auditor Certificate.</p></li><li><p>Other relevant HSE training certifications.</p></li></ul><br><p><strong>Preferred Qualifications</strong></p><ul><li><p>Previous experience with TAQA power distribution projects.</p></li><li><p>Prior TAQA Approval.</p></li><li><p>ADOSH OSH Practitioner Approval.</p></li><li><p>Valid UAE Driving License.</p></li></ul>

<p><strong>Overview / Responsibilities</strong></p><p><br></p><p><br></p><ul><li>Advise PMC core management on issues surrounding future appointments of electrical personnel</li><li>Ensure that all PMC Electrical Engineers under his / her supervision work to the project procedures, specifications and standards, good engineering practices and techniques, and any project-specific requirements</li><li>Review / Validate detailed design and Engineering Deliverables</li><li>Supervise the day to day engineering interfaces between PMC core engineering group, Project Managers and the engineering teams assigned to the EPC package – includes interaction with all other specialist disciplines as required</li><li>Participate in Hazard and Operability (HAZOP), Safety Integrity Level (SIL), Project Health, Safety and Environment Review (PHSER) exercises for the EPC projects during detailed engineering Participation in design review, 3D Model Reviews, Value Engineering, Risk Management workshops, constructability Reviews, PHSERs , IPR etc.</li><li>Input into engineering procedures and work practices as appropriate, in conjunction with Core Electrical Lead</li><li>Carryout Technical Evaluation of Bids, Issue Bid Technical Clarifications, Technical Evaluation Reports and Recommendations</li><li>Develop close working relationships between all engineering group members, Project Managers / projects team and EPC staff to ensure a consistent approach and effective resolution of issues</li><li>Develop a good team spirit within assigned PMC personnel and encourage team working with the Contractor and other customer groups</li></ul><p><br></p><p><strong>Skills / Qualifications</strong></p><p><br></p><ul><li>B.S. or equivalent degree in Electrical Engineering from an accredited university with minimum ten years relevant experience in the oil / gas industry</li><li>Must have been in CONSULTANT’s organization for at least three years in similar position and must have previous PMC experience</li><li>Fully familiar with international codes, standards and recommended practices to be applied for oil / gas projects during FEED and EPC phase of execution</li><li>Experience to manage FEED Engineers and FEED deliverables for owner is distinctly preferred</li><li>Must have proven ability to contribute during development of electrical system studies and Hazop / Safety reviews</li></ul>

<ul><li>Lead and manage all phases of civil engineering projects, from conception and design through construction and handover, ensuring adherence to scope, budget, and schedule.</li><li>Develop comprehensive project plans, including detailed timelines, resource allocation, and risk mitigation strategies for complex infrastructure developments.</li><li>Oversee the design and review of civil engineering plans, specifications, and contract documents, ensuring compliance with all relevant codes, standards, and regulations.</li><li>Manage and coordinate multidisciplinary project teams, including engineers, architects, contractors, and consultants, fostering effective collaboration and communication.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil Engineering or a closely related field from an accredited institution.</li><li>Professional Engineer (PE) license or equivalent professional certification.</li><li>Minimum of 7-10 years of progressive experience in civil engineering project management, with a proven track record of successful project delivery.</li><li>Demonstrated experience in managing large-scale infrastructure projects (e.g., transportation, water/wastewater, land development).</li></ul>

<p><strong>Overview / Responsibilities</strong></p><p><br></p><p><br></p><ul><li>Act as a focal point for engineering discipline leads regarding scheduling and progress issues.</li><li>Be particularly diligent in recognizing and reporting to Project Management potential problems in all phases of the project</li><li>Ensure that the schedules and systems are integrated to measure, trend and forecast the work, and are in place and managed</li><li>Contribute to the change management process, analyzing and reporting schedule impacts to the project</li><li>Updating the proposal schedule to indicate specific milestones agreed upon in the Contract</li><li>Preparing engineering and procurement schedules at varying levels of detail</li><li>Assisting with obtaining alignment between Engineering and Procurement Schedules</li><li>Delivering of weekly and monthly project reports</li><li>Ensuring that Corporate Systems are set up and maintained inline with project schedules</li><li>Periodically updating schedules to include scope changes, latest progress and delivery information</li><li>Assisting with development of Design Change Notices by highlighting impact on schedule, and assist with related tracking and re-baselining effort</li><li>Obtaining deliverables and drawing lists and updates from disciplines and distribute compiled reports</li><li>Developing and distribute project curves of progress, cost and manpower, including planned, actual and forecast figures</li></ul><p><br></p><p><strong>Skills / Qualifications</strong></p><p><br></p><ul><li>Bachelor Degree in Engineering</li><li>Minimum 15 years of experience mainly in oil and gas industry</li><li>Must have been in CONSULTANT’s organization for at least three years in similar position and must have previous PMC experience</li><li>Fully familiar with international codes, standards and recommended practices to be applied for oil / gas projects during FEED and EPC phase of execution</li><li>Experience to manage FEED Engineers and FEED deliverables for owner is distinctly preferred</li></ul>

<p>Job Description •Lead and manage DC System Replacement Projects from initiation to completion. •Coordinate with clients to address inquiries related to company product offerings. •Conduct site visits during both tendering and project execution stages. •Prepare and manage technical and commercial inquiries related to substation solutions within the product portfolio. •Develop cost estimations and prepare technical & commercial offers for quotations and tender submissions. •Supervise and execute installation, testing, and commissioning of DC systems. •Ensure all project activities comply with safety regulations and quality standards. •Attend and support site works at TRANSCO and EWE locations as required. •Prepare and review RMD (Red Mark) drawings and As-built drawings using AutoCAD. •Ensure all drawings accurately reflect final site conditions after project completion. •Review drawings received from OEMs and provide feedback/comments for necessary corrections. •Manage all project-related documentation including drawing submissions, prepare and submit SAT (Site Acceptance Test) reports and other required documentation as per client requirements</p><p>Additional candidate Requirements • Experience in installation of DC system, Battery chargers, DB etc is preferred • Candidates with TAQA competency certificate is optional • BTECH Degree in Electrical/Electronics • Min. 2 years' experience in UAE • UAE Valid DL</p>

<p>Job Description •Lead and manage DC System Replacement Projects from initiation to completion. •Coordinate with clients to address inquiries related to company product offerings. •Conduct site visits during both tendering and project execution stages. •Prepare and manage technical and commercial inquiries related to substation solutions within the product portfolio. •Develop cost estimations and prepare technical & commercial offers for quotations and tender submissions. •Supervise and execute installation, testing, and commissioning of DC systems. •Ensure all project activities comply with safety regulations and quality standards. •Attend and support site works at TRANSCO and EWE locations as required. •Prepare and review RMD (Red Mark) drawings and As-built drawings using AutoCAD. •Ensure all drawings accurately reflect final site conditions after project completion. •Review drawings received from OEMs and provide feedback/comments for necessary corrections. •Manage all project-related documentation including drawing submissions, prepare and submit SAT (Site Acceptance Test) reports and other required documentation as per client requirements</p><p>Additional candidate Requirements • Experience in installation of DC system, Battery chargers, DB etc is preferred • Candidates with TAQA competency certificate is optional • BTECH Degree in Electrical/Electronics • Min. 2 years' experience in UAE • UAE Valid DL</p>

<p>We are seeking a Technical Engineer (MEP) to support the Technical Manager in ensuring the quality, compliance, and successful delivery of residential and mixed-use developments across Abu Dhabi and Dubai. The role focuses on reviewing MEP design submissions, monitoring construction quality, and ensuring compliance with approved drawings, project specifications, and UAE authority requirements. • Review MEP shop drawings, material submittals, load calculations, and method statements for compliance with project requirements. • Monitor site works to ensure mechanical, electrical, plumbing, firefighting, HVAC, and ELV installations comply with approved IFC drawings and specifications. • Review and respond to RFIs and Technical Queries (TQs), resolving technical issues and design clashes. • Prepare inspection reports, technical review logs, NCR/SOR logs, and weekly progress reports. • Coordinate with contractors, consultants, and internal stakeholders to ensure timely project delivery. • Attend weekly technical coordination meetings and conduct regular site inspections across Abu Dhabi and Dubai. • Identify technical risks, quality issues, and non-compliance, and escalate them to the Technical Manager.</p><p>• Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related discipline. • Minimum 5 years of UAE experience in technical review, QA/QC, or site engineering with a contractor, consultant, or developer. • Strong knowledge of HVAC, plumbing, firefighting, electrical, and ELV systems, including shop drawing reviews, load calculations, and inspection procedures. • Experience reviewing shop drawings, material submittals, method statements, RFIs, and Technical Queries (TQs). • Good understanding of UAE authority requirements and building codes (ADCD, DM/DDA, Estidama, DEWA/ADDC). • Valid UAE driving license and own vehicle are required, as the role involves regular travel between Abu Dhabi and Dubai.</p>

<strong>About the Role:</strong><br><p>As a Full Stack Software Engineer based in the United Arab Emirates, you will design, develop, and maintain scalable web applications across the entire technology stack. You will collaborate with cross-functional teams to deliver high-quality solutions that drive our digital offerings forward, ensuring performance, security, and reliability in a fast-paced, agile environment.</p><br><strong>Responsibilities:</strong><br><ul><li>Design, develop, and maintain front-end features using React.js</li><li>Build and optimize server-side applications and RESTful APIs with Node.js</li><li>Develop and manage relational databases using SQL</li><li>Ensure application performance, scalability, and security best practices</li><li>Collaborate with product managers, designers, and QA engineers in an Agile/Scrum process</li><li>Conduct code reviews, provide constructive feedback, and mentor junior developers</li><li>Troubleshoot, debug, and resolve production issues in a timely manner</li><li>Participate in architectural discussions and contribute to technical decision-making</li></ul><br><strong>Required Qualifications:</strong><br><ul><li>3–7 years of professional software development experience</li><li>Strong proficiency in JavaScript (ES6+)</li><li>Proven experience with React.js and component-based architectures</li><li>Experience building RESTful APIs with Node.js and Express</li><li>Solid understanding of relational databases and SQL querying</li><li>Familiarity with Git and collaborative version control workflows</li><li>Knowledge of web performance optimization and security principles</li><li>Excellent problem-solving skills and attention to detail</li><li>Fluent in English with strong verbal and written communication</li></ul><br><strong>Preferred Qualifications:</strong><br><ul><li>Experience with cloud platforms such as AWS, Azure, or Google Cloud</li><li>Familiarity with TypeScript and static typing</li><li>Hands-on experience with Docker and container orchestration (Kubernetes)</li><li>Exposure to CI/CD pipelines and DevOps practices</li><li>Previous work experience in the UAE or MENA region</li><li>Bachelor’s degree in Computer Science, Engineering, or related field</li><li>Relevant certifications (e.g., AWS Certified Developer, Microsoft Azure Developer)</li></ul><br>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Assists in the preparation of quality documentation, including the Inspection &amp; Test Plans (ITPs) and in the review of construction documents for compliance with project quality requirements related to Welding works.</p></li><li><p>Monitors all phases and processes required for the effective completion of all related Welding works and in particular issues of design, procurement, construction and final hand over of the related Welding works.</p></li><li><p>Monitors the implementation of Method Statements, and, Inspection &amp; Test Plans related to Welding works, and ensure all necessary records are generated in a timely manner in their area of assigned responsibility.</p></li><li><p>Manages the inspection and testing of Welding works in their area of assigned responsibilities, including monitoring the work of QC Inspectors under their authority.</p></li><li><p>Monitors the close out of punch lists established for incomplete related to Mechanical works.</p></li><li><p>Monitors all measurement &amp; testing instruments employed for Welding works, that they are functional and calibrated.</p></li><li><p>Witnesses, reviews and approves welder qualifications and WPS, PQR qualifications.</p></li><li><p>Liaises and coordinates with 3rd Party Testing /Inspection Company as required related to Mechanical works.</p></li><li><p>Statistical analysis and evaluation of test data related to Welding works.</p></li><li><p>Prepares, files, maintains test/inspection records and any other quality records generated related to Welding works.</p></li><li><p>Assisting construction personnel to identify and resolve problems and potential or actual non-conformances related to Welding works.</p></li><li><p>Advises the QC Manager of non-conformance occurrences and where necessary, raises a Non-conformance Report for non-compliant work, and monitors the closeout and effectiveness of the correction and corrective action undertaken.</p></li><li><p>Where required, assists the QC Manager in undertaking periodic audits, including those of sub-contractors and suppliers, in particular technical compliance audits in their field of specialization.</p></li><li><p>Attends and witnesses all Client verification of work (inspection, test and the like) on site, and coordinates close out of any and all outstanding issues related to Civil works.</p></li><li><p>Where required, assists in the preparation of final document for certification.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical or&nbsp;Metallurgy Engineering with Master's Degree in Welding</p></li><li><p>at least 15 years of related experience (ADNOC experience will be an advantage).</p></li><li><p>Professional certification in welding engineering (IWE, CWE)</p></li><li><p>ASNT Level II in RT, UT, MT and PT</p></li><li><p>Certified ISO 9001:2015 Internal auditor.&nbsp;lead auditor is preferred&nbsp;</p></li><li><p>Certified 3.1 CSWIP required, 3.2 is preferred</p></li><li><p>Knowledgeable in Welding Process, Welding Procedure Qualification in line with ASME SEC IX, AWS D1.1, API 1104, ISO 13847, SHELL DEP, ADNOC specifications.</p></li><li><p>Familiar with Welding defect identification and root causes with control measures to prevent occurrence, hands on welding training for implementation contractor and vendor welding teams,</p></li><li><p>Well versed in monitoring of welding repair data and welder performance. Shall be conversant with resolution of site welding issues including selection of welding consumable based on various material groupings.</p></li><li><p>Ability to optimize welding procedure qualification based on material standard and production thickness</p></li><li><p>Oil &amp; Gas EPC Projects experience.</p></li></ul><p><br></p><p><strong>Note: </strong>Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Supervise and coordinate structural construction activities within the fabrication yard.</p></li><li><p>Ensure work is executed in accordance with project specifications, drawings, HSE, and quality standards.</p></li><li><p>Monitor fabrication, assembly, and erection activities to meet project schedules.</p></li><li><p>Coordinate with engineering, QA/QC, planning, and subcontractors to resolve construction issues.</p></li><li><p>Review construction drawings, work packs, and method statements.</p></li><li><p>Conduct site inspections and ensure compliance with applicable codes and standards.</p></li><li><p>Monitor progress, identify risks, and implement corrective actions.</p></li><li><p>Support mechanical completion, pre-commissioning, and project handover activities.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Engineering.</p></li><li><p>Minimum 15 + years of experience in Oil &amp; Gas Construction, with at least 5 years in a lead role.</p></li><li><p>Minimum 5+ years of offshore experience is mandatory.</p></li><li><p>Experience with structural steel fabrication, assembly, and erection.</p></li><li><p>Familiarity with international standards&nbsp;</p></li><li><p>PMC,EPC and fabrication yard projects experience will be preferred</p></li><li><p>Previous experience in the ADNOC projects in the similar role would be an added advant</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare MEP design drawings and layouts for building projects.</p></li><li><p>Assist in the design of HVAC, plumbing, drainage, and electrical systems.</p></li><li><p>Coordinate with architects, structural engineers, and other consultants.</p></li><li><p>Prepare technical calculations, BOQs, and material specifications.</p></li><li><p>Review project drawings and ensure compliance with local codes and standards.</p></li><li><p>Support the preparation of design submissions and technical documents.</p></li><li><p>Attend design coordination meetings with consultants and clients.</p></li><li><p>Revise drawings based on consultant comments and project requirements.</p></li><li><p>Work closely with the project team to ensure timely project delivery.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Bachelor's Degree in Mechanical or Electrical Engineering.</p></li><li><p>Minimum <strong>2 years of experience</strong> as an <strong>MEP Engineer</strong>.</p></li><li><p>Minimum <strong>2 years of experience in building construction</strong> (mandatory).</p></li><li><p>Experience working on <strong>Design &amp; Consultant projects</strong>.</p></li><li><p>Proficiency in <strong>AutoCAD</strong> (Revit knowledge is an advantage).</p></li><li><p>Good understanding of MEP systems and design standards.</p></li><li><p>Strong communication and coordination skills.</p></li><li><p>Candidates currently residing in the UAE are preferred.</p></li></ol><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Develop and implement comprehensive cost control strategies and systems for major projects, ensuring adherence to budget and financial targets.</li><li>Lead the preparation and analysis of detailed cost estimates, forecasts, and budgets throughout the project lifecycle, identifying potential risks and variances.</li><li>Monitor and report on project expenditures, progress, and performance against baseline budgets, providing timely and accurate financial insights to stakeholders.</li><li>Conduct in-depth cost analysis, including earned value management (EVM), variance analysis, and trend analysis, to support informed decision-making.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Engineering, Construction Management, Finance, or a related quantitative field.</p></li><li><p>Proven expertise in developing and managing project budgets, forecasts, and cost reports for large-scale, complex projects.</p></li><li><p>Proficiency in industry-standard cost control software (e.g., Primavera P6, CostX, SAP), and advanced Excel skills.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare comprehensive, highly accurate cost estimations for upcoming electrical projects and tender submissions.</p></li><li><p>Review, analyze, and approve project quotations, vendor proposals, and subcontractor bids.</p></li><li><p>Conduct value engineering to optimize project costs without compromising on quality or safety.</p></li><li><p>Monitor project budgets continuously, ensuring financial targets and profit margins are maintained.</p></li><li><p>Oversee the daily progress of multiple concurrent electrical projects across various sites.</p></li><li><p>Coordinate extensively with cross-functional project teams (MEP, Civil, Architecture) to ensure seamless integration and execution of electrical works.</p></li><li><p>Develop and manage detailed project schedules, ensuring alignment with the overall master project plan.</p></li><li><p>Act as the primary technical point of contact for clients, consultants, and main contractors regarding electrical scopes.</p></li><li><p>Evaluate overall project performance against baseline schedules and budgets.</p></li><li><p>Proactively identify potential bottlenecks, material shortages, or operational delays, and implement immediate corrective action plans.</p></li><li><p>Ensure all electrical installations comply with stringent company quality standards and relevant UAE local authority regulations (e.g., DEWA, ADDC, SEWA, Civil Defence).</p></li><li><p>Conduct regular site inspections and lead progress review meetings with site teams.</p></li><li><p>Direct, supervise, and mentor junior electrical engineers, providing technical guidance and support in their daily planning and execution tasks.</p></li><li><p>Delegate tasks effectively, ensuring balanced workloads and accountability among the engineering team.</p></li><li><p>Identify training needs and foster a culture of continuous improvement, safety, and high performance within the electrical department.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s Degree in Electrical Engineering (attested for UAE requirements).</p></li><li><p>Minimum of 5-7 years of progressive experience in electrical project engineering and management, entirely or predominantly within the UAE construction/contracting sector.</p></li><li><p>Expertise in electrical estimation and tendering processes.</p></li><li><p>In-depth knowledge of UAE electrical codes, standards, and regulatory compliance.</p></li><li><p>Proficiency in industry-standard software (AutoCAD, MS Project/Primavera P6, MS Office Suite, and estimation software).</p></li><li><p>Strong understanding of MEP coordination and integration.</p></li><li><p> Ability to make swift, informed decisions to resolve site delays and technical clashes.</p></li><li><p>Proven ability to guide, develop, and elevate the performance of junior engineers.</p></li><li><p>Excellent verbal and written communication skills for effective stakeholder management and reporting.</p></li><li><p>Exceptional organizational skills to juggle multiple projects and competing priorities simultaneously.</p></li><li><p>Project Management Professional (PMP) certification is highly preferred. Must possess relevant local authority approvals/licenses (e.g., DEWA/TAQA approved engineer status is a strong advantage).</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><ul><li><p>Managing long term service (Gas Turbine Components Repair) agreement of Key Account/Customer. </p></li><li><p>Ensuring the fulfilment of all technical &amp; commercial terms including conditions of the contracts.</p></li><li><p>Optimization of the contract performance. </p></li><li><p>Developing the business with the Key Account/Customer. </p></li><li><p>Be the focal point of contact with the customer, and internally within the organization.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>Bilingual: Arabic as a mother language (a must) &amp; Fluent in English.</p></li><li><p>Ability to travel to other countries, mainly KSA (estimate 40-50% per year)</p></li><li><p>Good Commercial and Project management knowledge &amp; understanding.</p></li><li><p>Good Technical knowledge in rotating equipment field.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Hands on experience on Core Java and Java EE technologies, such as JDBC, JMS, JNDI</p></li><li><p>Good understanding and hands on knowledge of IBM WebSphere administration &amp; deployment concepts.</p></li><li><p>Should be aware of AWS cloud components and its deployment framework through CI/CD pipeline.</p></li><li><p>Experience in log analysis &amp; application troubleshooting.</p></li><li><p>Experience on UNIX &amp; Linux operating systems with knowledge of basic shell scripting.</p></li><li><p>Knowledge of RDBMS databases (Oracle) with experience in writing SQL queries and scripts.</p></li><li><p>Good understanding of MQ and its operation</p></li><li><p>Basic knowledge of Infrastructure components, such as Firewall, Load balancer, Kong, Routes etc.</p></li><li><p>Should be able to trouble shoot production issues from application codes independently with minimal supervision.</p></li><li><p>Analyze the production issues from Monitoring tools like AppDynamics, ELK.</p></li><li><p>Prior experience in application support will be an added advantage.</p></li><li><p>Resource should be flexible to work on shifts.</p></li><li><p>Must have good verbal /written communication skills.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Computer Science, Engineering, or a related field, demonstrating a strong theoretical foundation.</li><li>Proven experience (3+ years) in supporting and troubleshooting enterprise-level Java applications in a production environment.</li><li>Proficiency in Java, Spring Boot, and related frameworks, with a deep understanding of object-oriented programming principles.</li><li>Experience with relational databases (e.g., PostgreSQL, MySQL) and NoSQL databases (e.g., MongoDB, Cassandra).</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary:</p><p>The Site Manager is responsible for the overall planning, execution, supervision, and successful delivery of water treatment and infrastructure projects. The role involves managing site operations, coordinating resources, ensuring compliance with technical, quality, and safety standards, and maintaining effective communication with clients, consultants, subcontractors, and internal teams. The Site Manager is accountable for project performance, workforce management, and achieving project objectives within schedule and budget.</p><p>Key Responsibilities:</p><ul><li><p>Manage and supervise all site activities related to the installation, fabrication, welding, testing, and commissioning of water treatment systems and associated infrastructure.</p></li><li><p>Plan, organize, and control project execution to ensure timely completion and compliance with project specifications.</p></li><li><p>Lead site teams, subcontractors, and suppliers to achieve project milestones and maintain productivity.</p></li><li><p>Review project drawings, specifications, method statements, and technical documents to ensure compliance with client requirements and applicable regulations.</p></li><li><p>Coordinate with procurement, logistics, and warehouse teams to ensure timely availability of materials, equipment, and manpower.</p></li><li><p>Monitor project schedules, progress, and resource utilization, and take corrective actions when required.</p></li><li><p>Conduct regular site meetings with clients, consultants, subcontractors, and internal stakeholders.</p></li><li><p>Ensure strict compliance with Quality Management System (QMS), Health, Safety &amp; Environment (HSE), and ISO requirements.</p></li><li><p>Identify project risks and implement mitigation measures to minimize delays and cost overruns.</p></li><li><p>Manage inspections, testing activities, authority approvals, and project handover documentation.</p></li><li><p>Review and approve daily, weekly, and monthly progress reports submitted by site engineers and supervisors.</p></li><li><p>Support project cost control, budgeting, variation management, and claims documentation.</p></li><li><p>Ensure compliance with UAE labor laws, company policies, and contractual obligations.</p></li><li><p>Resolve technical and operational challenges to maintain project continuity and customer satisfaction.</p></li><li><p>Conduct site surveys and provide recommendations for design improvements, value engineering, and operational efficiency.</p></li><li><p>Strong knowledge of fabrication, welding processes (TIG, ARC), piping systems, and mechanical installations.</p></li><li><p>Familiarity with SS316L, Duplex 2205, HDPE, PVC, and other industrial piping materials.</p></li><li><p>Sound understanding of ASME, ASTM, ISO, and UAE regulatory standards.</p></li><li><p>Proficient in AutoCAD, MS Project, Primavera (preferred), and engineering documentation.</p></li><li><p>Strong leadership, team management, negotiation, and decision-making skills.</p></li><li><p>Excellent communication and stakeholder management abilities.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Successful completion of projects within approved schedule and budget.</p></li><li><p>Compliance with technical specifications, quality requirements, and safety standards.</p></li><li><p>Effective manpower and subcontractor management.</p></li><li><p>Client satisfaction and timely resolution of project issues.</p></li><li><p>Accuracy and quality of project documentation and reporting.</p></li><li><p>Achievement of project milestones and handover targets.</p></li><li><p>Zero major HSE violations and adherence to company policies.</p></li></ul><p></p></section>

<ul><li>Oversee the entire subcontract lifecycle from initiation to closeout, ensuring compliance and efficiency.</li><li>Review, draft, and negotiate subcontract agreements, terms, and conditions to protect company interests.</li><li>Manage and track subcontract progress, deliverables, and payments, proactively identifying and resolving issues.</li><li>Coordinate with project management, engineering, and procurement teams to ensure seamless integration of subcontractors.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Engineering, Construction Management, Law, or a related field.</p></li><li><p>Minimum of 5 years of experience in subcontract coordination or contract engineering, preferably in the oil & gas or construction industry.</p></li><li><p>Proficiency in contract management software and standard office productivity tools.</p></li><li><p>Strong understanding of contract law, procurement processes, and project management principles.<br><br></p><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in construction (not design), Pipeline / Oil & Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>✔ Candidates must be immediate joiners</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><p>Attached JDs for your reference.<br></p><p><strong>Age Criteria:</strong></p><p>Maximum age limit is 49 years</p><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience<br></p><p><strong>Managerial and SR. Positions:</strong></p><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory<br></p><p><strong>Interview Date: </strong>Mumbai - 09th Aug 2026, Sunday, Chennai - 12th Aug 2026, Wednesday & Kochi - 16th Aug 2026, Sunday - Reporting time – 08:30 AM to 12:00 PM & 2:30 PM to 3:30 PM<br></p><p><strong>Mumbai - Mirage Hotel,</strong></p><p>Mumbai International Airport Approach Road, Near Marol Aqua Metro Stn. Andheri (East), Mumbai, Maharashtra, India – 400 059.</p><p>Waiting Hall – Amber Hall<br></p><p><strong>Chennai - The Residency Towers,</strong></p><p>115, Sir Thyagaraya Road, Chennai 600017</p><p>Waiting Hall – Senator Hall<br></p><p><strong>Kochin - Crowne Plaza Kochi,</strong></p><p>XI 641A Kundanoor Junction, NH-47 Bypass</p><p>Maradu, Ernakulam, Kerala, India, 682305</p><p>Waiting Hall – Onam Hall</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Design LV switchgear and control panels using <strong>EPLAN Electric P8</strong>.</p></li><li><p>Prepare electrical schematics, single-line diagrams (SLD), multi-line diagrams, wiring diagrams, and control circuit drawings.</p></li><li><p>Develop panel layout drawings, cable schedules, terminal plans, and bill of materials (BOM).</p></li><li><p>Prepare manufacturing and fabrication drawings for production.</p></li><li><p>Ensure designs comply with <strong>IEC standards</strong>, client specifications, and project requirements.</p></li><li><p>Review customer specifications and technical documents before design.</p></li><li><p>Coordinate with estimation, project, procurement, and production teams.</p></li><li><p>Select appropriate electrical components such as MCCBs, ACBs, contactors, relays, VFDs, meters, CTs, and busbar systems.</p></li><li><p>Optimize panel layouts for efficient manufacturing and wiring.</p></li><li><p>Support the production team during panel assembly and testing.</p></li><li><p>Revise drawings based on client comments and project changes.</p></li><li><p>Maintain proper document control and revision history.</p></li><li><p>Provide technical support during FAT, SAT, and commissioning when required.</p></li><li><p>Ensure timely completion of design deliverables within project schedules.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's Degree or Diploma in Electrical Engineering.</p></li><li><p><strong>2–5 years of experience</strong> in EPLAN design for <strong>LV Switchgear Panels</strong>.</p></li><li><p>Experience in electrical panel manufacturing is mandatory.</p></li><li><p>Proficient in <strong>EPLAN Electric P8</strong>.</p></li><li><p>Knowledge of AutoCAD is an advantage.</p></li><li><p>Strong understanding of:</p><ul><li><p>LV Switchgear Panels</p></li><li><p>MDB, SMDB, MCC, PCC, Capacitor Bank, ATS, Synchronization Panels</p></li><li><p>Motor Control Circuits</p></li><li><p>Power Distribution Systems</p></li><li><p>IEC Standards</p></li><li><p>Electrical Protection and Control Systems</p></li></ul></li><li><p>Ability to prepare:</p><ul><li><p>Single Line Diagrams (SLD)</p></li><li><p>General Arrangement (GA) Drawings</p></li><li><p>Wiring Diagrams</p></li><li><p>Terminal Plans</p></li><li><p>Cable Schedules</p></li><li><p>Bill of Materials (BOM)</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Start-Up Phase</strong></p><ul><li><p>Assist OCM in preparing offshore project deliverables and attending project kick-off and strategy meetings</p></li><li><p>Support development of offshore execution plans, construction schedules, and techno-commercial analyses, considering project milestones and barge availability</p><br></li></ul><p><strong>All Project Phases</strong></p><ul><li><p>Assist OCM in preparing construction aids (load register), marine spread requirements, pipe coating scope, and monitor fabrication/pipe coating progress</p></li><li><p>Review engineering documents, drawings, and analyses from a constructability perspective</p></li><li><p>Support preparation of detailed scopes, schedules, and interface/bridging documents for offshore subcontracted works (excluding diving and NDT), and coordinate technical and commercial evaluations</p></li><li><p>Act as focal point for subcontractor coordination when assigned, monitoring progress and performance</p></li><li><p>Support issuance of Purchase Requisitions for offshore materials not covered by engineering and follow up with procurement on ordering and delivery</p></li><li><p>Coordinate offshore scope activities with all internal departments</p></li><li><p>Attend methods and constructability meetings and review installation procedures, anchor patterns, and drawings</p></li><li><p>Assist in technical evaluation, expediting, receipt, and MRV approval of offshore materials</p></li><li><p>Provide input to weekly and monthly reports and attend client meetings as required</p></li><li><p>Support studies for changes in offshore execution plans, including preparation of bridging documents, micro-schedules, and method statements</p></li><li><p>Liaise with third-party agencies and marine warranty surveyors on marine and construction matters</p></li><li><p>Attend weekly progress meetings with VPOO/OCM and highlight issues and risks</p></li><li><p>Ensure implementation of the project safety plan, company HSEMS, and quality standards</p></li><li><p>Capture lessons learned and best practices and participate in quality audits and closeout actions</p></li><li><p>Initiate offshore variation orders/claims, compile technical inputs, and support assignment of offshore durations</p></li><li><p>Assist in reviewing subcontractor invoices and provide clarifications to finance</p></li><li><p>Prepare and coordinate mobilization plans and support mobilization meetings with marine and field teams</p><br></li></ul><p><strong>Pre-Offshore Phase</strong></p><ul><li><p>Prepare the Risk Assessment Register, attend RA meetings, and circulate consolidated comments to the client and internal stakeholders</p></li><li><p>Prepare job cards for offshore hook-up works and develop detailed micro-schedules and manpower histograms for shutdown activities</p></li><li><p>Prepare JUB specifications for hired marine spread in line with CHOD requirements</p></li><li><p>Coordinate with OPE to ensure readiness and mobilization of all installation aids</p></li><li><p>Ensure timely pre-installation/load-out activities and availability of latest approved offshore documentation onboard.</p></li></ul><p><strong>Offshore Execution Phase</strong></p><ul><li><p>Assist in updating offshore schedules based on progress and resource availability and propose recovery measures for delays</p></li><li><p>Support coordination of subcontractor mobilization/demobilization and performance evaluation</p></li><li><p>Monitor daily offshore operations, attend daily meetings, and coordinate closely with clients, marine, and field teams</p></li><li><p>Conduct HSE audits and safety tours on offshore spreads</p></li><li><p>Interface with project and yard construction teams to maintain load-out dates and offshore continuity</p></li><li><p>Conduct joint walk-throughs on fabricated structures to avoid offshore carry-over</p></li></ul><p><strong>Close-Out Phase</strong></p><ul><li><p>Assist in preparation of offshore final documentation and project close-out reports</p></li><li><p>Review contract documents and drawings to identify constructability issues and variation requirements</p></li><li><p>Support Construction Managers in directing offshore activities, ensuring resource availability, safety compliance, and adherence to contract and ISO requirements</p></li><li><p>Assist in schedule adjustments to manage changes, delays, and contingencies while controlling costs</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in engineering (Preferably Mechanical, Civil, Naval), or equivalent</p></li><li><p>Minimum 10 years' experience in Offshore Construction in Oil &amp; Gas Industry</p></li><li><p>Good commercial, financial and contractual awareness</p></li><li><p>Good negotiation and decision-making skills</p></li><li><p>Excellent spoken and written English language skills</p></li><li><p>Potential managerial skills</p></li><li><p>Excellent communication skills</p></li><li><p>Committed team player/ leader</p></li><li><p>Thorough understanding of offshore operations and equipment.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The role is responsible for supporting the company’s vendor registration, client prequalification, technical qualification, and tender support activities across the Oil &amp; Gas, EPC and Industrial sectors. The role coordinates with internal stakeholders and external clients to ensure timely submission of compliant technical and commercial information while maintaining required client approvals and registrations. </p><p><strong>I. Vendor Pre-Qualification &amp; Registration</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit vendor prequalification documents for Oil &amp; Gas, EPC, and industrial clients.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain registrations, approvals, certifications, renewal dates, and client requirements.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Track submissions, follow up on pending items, and respond to client clarifications.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Ensure documentation remains updated and readily available for business opportunities.</p><br><p><strong>II. Technical Documentation &amp; Compliance Support</strong></p><ul><li><p>Prepare, review, and maintain technical documents required for prequalification and tender submissions, including:</p><ul><li><p>Technical datasheets</p></li><li><p>Product catalogues</p></li><li><p>Engineering specifications</p></li><li><p>Compliance certificates</p></li><li><p>Quality documentation</p></li><li><p>Manufacturer/OEM authorization documents</p></li><li><p>Project references and technical capability documents</p></li></ul></li></ul><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Coordinate with internal teams, suppliers, and manufacturers to obtain required technical information.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Ensure submissions meet client requirements and industry standards.</p><br><p><strong>III. Tender &amp; Business Development Support</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Support Sales and Business Development with tender, RFI, RFQ, RFP</strong>, and technical submission packages.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Identify bid opportunities</strong> through portals, industry sources, and market research.</p><ul><li><p>Support in securing and maintaining <strong>Approved Vendor/Contractor status</strong> with key clients and EPC contractors to maximize tender opportunities.</p></li></ul><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Review customer requirements and confirm qualification, compliance, and documentation needs.</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Work with the team to enhance the quality and presentation of bid submissions.</p><br><p><strong>IV. Client Portal &amp; Documentation Management</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Manage client portal registrations, submissions, approvals, renewal dates, and related records.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Support continuous improvement of the company’s prequalification and approval processes</p><br><p><strong>V. Database Management</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain bid templates, pricing models, historical data, and registration records.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor bid timelines and coordinate with stakeholders to ensure tasks are prioritized effectively and deadlines are met.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education</strong></p><p>·&nbsp;&nbsp;&nbsp;Bachelor’s degree in engineering, business, or related field; engineering background preferred.</p><br><p><strong>Experience</strong></p><p>·&nbsp;&nbsp;&nbsp;<strong>1–3 years of relevant</strong> in Oil &amp; Gas, EPC, Engineering, Industrial, Energy, or related sectors preferred.</p><p>·&nbsp;&nbsp;&nbsp;Experience in Vendor registration, Prequalification, Tender, Technical documentation, or Sales/Application engineering preferred.</p><ul><li><p>UAE Oil &amp; Gas industry exposure is an advantage.</p></li></ul><br><p><strong>Technical Knowledge &amp; Skills</strong></p><p>· Understanding of Oil &amp; Gas processes, vendor approvals, prequalification, and tender documentation, including ADNOC requirements.</p><p>· Ability to interpret technical documents, specifications, datasheets, quality &amp; compliance, and certification requirements.</p><ul><li><p>Proficient in Microsoft Office Suite and document management.</p></li></ul><br><p><strong>Core Competencies</strong></p><p>·&nbsp;&nbsp;&nbsp;Detail-oriented with strong documentation accuracy.</p><ul><li><p>Good coordination and communication skills.</p></li><li><p>Ability to manage multiple priorities and deadlines and work autonomously or collaboratively in cross – functional team settings.</p></li></ul><p></p></section>