UI developer Jobs - Dubai UAE

<ul><li><p>Operate, monitor, and maintain chillers and associated HVAC equipment.</p></li><li><p>Perform preventive and corrective maintenance of <strong>water-cooled and air-cooled chillers</strong>.</p></li><li><p>Troubleshoot mechanical, electrical, refrigeration, and control-related faults in chiller systems.</p></li><li><p>Monitor chiller operating parameters including temperature, pressure, flow, current, voltage, vibration, and refrigerant conditions.</p></li><li><p>Inspect compressors, condensers, evaporators, expansion valves, pumps, motors, cooling towers, and associated components.</p></li><li><p>Carry out routine inspection and servicing of chilled water systems and associated equipment.</p></li><li><p>Check chilled water supply and return temperatures and ensure systems operate within specified parameters.</p></li><li><p>Perform refrigerant leak detection, charging, recovery, and evacuation as required and in accordance with applicable safety procedures.</p></li><li><p>Check refrigerant pressures, oil levels, compressor performance, and system operating conditions.</p></li><li><p>Inspect and maintain chilled water pumps, condenser water pumps, valves, strainers, expansion tanks, and related equipment.</p></li><li><p>Inspect cooling towers, including fans, motors, nozzles, fill media, water levels, and associated components.</p></li><li><p>Carry out cleaning of condenser and evaporator coils/tubes as required.</p></li><li><p>Perform tube cleaning and descaling activities for water-cooled chillers.</p></li><li><p>Inspect electrical panels, contactors, relays, overloads, starters, VFDs, sensors, actuators, and control circuits associated with chillers.</p></li><li><p>Identify and rectify electrical and control system faults in coordination with relevant specialists.</p></li><li><p>Check BMS interfaces, alarms, sensors, set points, and chiller control sequences.</p></li><li><p>Monitor equipment performance and identify abnormal conditions before they result in breakdowns.</p></li><li><p>Respond promptly to equipment breakdowns and emergency maintenance requests.</p></li><li><p>Carry out root-cause analysis for recurring chiller and HVAC equipment failures.</p></li><li><p>Replace defective components, bearings, belts, filters, sensors, valves, electrical components, and other parts as required.</p></li><li><p>Perform vibration, temperature, pressure, and performance checks on rotating equipment.</p></li><li><p>Assist in chiller start-up, shutdown, changeover, and seasonal commissioning activities.</p></li><li><p>Maintain accurate records of equipment readings, maintenance activities, breakdowns, spare parts, and repairs.</p></li><li><p>Prepare daily maintenance reports, checklists, service reports, and equipment history records.</p></li><li><p>Maintain preventive maintenance schedules and ensure planned activities are completed within the required timelines.</p></li><li><p>Coordinate with facility management, O&M Engineers, supervisors, subcontractors, and specialist service providers.</p></li><li><p>Assist external specialist contractors during major chiller overhauls, repairs, and commissioning activities.</p></li><li><p>Verify replacement parts and consumables against equipment specifications and approved requirements.</p></li><li><p>Maintain adequate housekeeping around chiller rooms, plant rooms, workshops, and work areas.</p></li><li><p>Ensure tools, testing instruments, and equipment are properly maintained and calibrated where applicable.</p></li><li><p>Follow approved Permit-to-Work, Lockout/Tagout, isolation, and safe working procedures.</p></li><li><p>Ensure proper use of PPE and compliance with HSE requirements during maintenance activities.</p></li><li><p>Maintain awareness of refrigerant handling, electrical safety, confined-space requirements, and other applicable risks.</p></li><li><p>Support energy-efficiency initiatives by monitoring chiller performance and identifying opportunities to reduce energy consumption.</p></li><li><p>Assist in maintaining optimum <strong>COP/EER and overall chiller plant efficiency</strong>.</p></li><li><p>Perform other O&M duties assigned by the Supervisor or Engineer.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong hands-on knowledge of chiller operation and maintenance.</p></li><li><p>Good knowledge of <strong>centrifugal, screw, scroll, reciprocating, and packaged chillers</strong>.</p></li><li><p>Understanding of refrigeration cycles and HVAC systems.</p></li><li><p>Strong troubleshooting skills for mechanical, electrical, refrigeration, and control faults.</p></li><li><p>Knowledge of compressors, condensers, evaporators, expansion devices, pumps, cooling towers, and chilled water systems.</p></li><li><p>Ability to interpret electrical control diagrams, wiring diagrams, P&IDs, and HVAC drawings.</p></li><li><p>Knowledge of refrigerant recovery, evacuation, leak detection, and charging procedures.</p></li><li><p>Familiarity with BMS, PLC controls, sensors, actuators, VFDs, and HVAC control systems.</p></li><li><p>Ability to use pressure gauges, manifold gauges, multimeters, clamp meters, temperature meters, and other HVAC testing equipment.</p></li><li><p>Good knowledge of preventive and predictive maintenance practices.</p></li><li><p>Strong fault-finding and problem-solving abilities.</p></li><li><p>Good documentation and reporting skills.</p></li><li><p>Strong awareness of HSE and safe maintenance practices.</p></li><li><p>Ability to work independently and respond effectively to breakdown/emergency situations.</p></li></ul><p>Qualifications & Experience</p><ul><li><p>ITI/Diploma in <strong>Mechanical Engineering, Refrigeration & Air Conditioning, HVAC, or a related trade</strong>.</p></li><li><p><strong>5–8 years of relevant experience</strong> in chiller operation and maintenance, preferably in commercial buildings, district cooling, hospitals, hotels, industrial facilities, or large-scale infrastructure projects.</p></li><li><p>Hands-on experience with <strong>water-cooled and/or air-cooled chillers</strong>.</p></li><li><p>Experience in preventive maintenance, breakdown maintenance, troubleshooting, and repair of HVAC/chiller systems.</p></li><li><p>Experience with major chiller manufacturers will be an advantage.</p></li><li><p>UAE/GCC experience is highly preferred.</p></li><li><p>Experience working on projects in <strong>Dubai and Abu Dhabi</strong> will be an advantage.</p></li><li><p>Relevant HVAC/Refrigeration certification will be an added advantage.</p></li></ul><p>Key Performance Areas</p><ul><li><p>Reliable and efficient operation of chiller systems.</p></li><li><p>Timely completion of preventive and corrective maintenance.</p></li><li><p>Reduction in equipment breakdowns and downtime.</p></li><li><p>Effective troubleshooting and fault resolution.</p></li><li><p>Optimum chiller performance and energy efficiency.</p></li><li><p>Accurate maintenance records and reporting.</p></li><li><p>Compliance with HSE and refrigerant-handling requirements.</p></li><li><p>Proper maintenance and availability of critical HVAC equipment.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<ul><li>Manage facade-related budgets, track expenditures, and provide accurate cost forecasts, ensuring projects are completed within budget.</li><li>Manage facade-related change orders, assessing their impact on the project budget and schedule, and negotiating with subcontractors.</li><li>Oversee and manage all facade-related construction activities, ensuring adherence to design specifications, budget, and schedule.</li><li>Conduct thorough reviews of facade designs, shop drawings, and submittals, providing technical expertise and identifying potential issues early on.</li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>8+ years of experience in facade construction, engineering, or project management.</p></li><li><p>Strong knowledge of curtain walls, cladding, glazing, and facade systems.</p></li><li><p>Experience in managing facade budgets, cost control, and forecasting.</p></li><li><p>Proven ability to handle change orders, variations, and subcontractor negotiations.</p></li><li><p>Skilled in reviewing facade designs, shop drawings, and technical submittals.</p></li><li><p>Experience overseeing facade installation activities and ensuring quality compliance.</p></li></ol>

CNS is a technology company that powers the future by providing digital solutions essential to support all enterprise and human development. While growing and managing a robust pool of supplier-partners for the benefit of our clients has always been a priority, we are constantly re-inventing ourselves.<br><br>Founded in 1987 with more than 30 years of experience, CNS employs over 320 employees including more than 250 certified engineers. We offer in-depth expertise and a range of best-in-class products that support the digital transformation of all major industries. With offices in three countries, we have an extensive reach into, and regional knowledge of the Middle East markets.<br><br>A shift into levering our many years of experience to develop pioneering software in-house will add yet another dimension to our highly innovative solutions-portfolio.<br><br>Job Description<br><br>We are looking for a motivated and proactive Software Engineer - Emirati Talent with around two years of professional experience to join our team. The ideal candidate is an Emirati software engineer who takes ownership of their work, enjoys solving challenging technical problems, and is eager to learn and grow in a collaborative environment.<br><br>Duties & Responsibilities<br><br> Design, develop, test, and maintain scalable web applications and backend services. Take ownership of assigned features from design through deployment and support. Collaborate with cross-functional teams to deliver high-quality software solutions. Write clean, maintainable, and well-documented code. Troubleshoot, debug, and resolve production issues efficiently. Participate in code reviews and contribute to the continuous improvement of development practices. Ensure applications are secure, performant, and reliable. <br><br>Qualifications<br><br>Education:<br><br> Bachelor's degree in Computer Science, Software Engineering. Relevant technical experience in software development, cloud, Dev Ops, or related areas. <br><br>Experience<br><br> Around two years of professional software development experience. Experience across the software development lifecycle, production support, RESTful APIs, microservices, CI/CD, or cloud platforms. <br><br>Skills & Abilities<br><br> Python and Flask; Java and Spring Boot; Postgre SQL; basic React.js; Docker or Click Up, RESTful APIs, microservices architecture, CI/CD pipelines, and cloud platforms. <br><br>Additional Information<br><br>Compliance with policies and procedures based on the ISO standards adopted by CNS.

Job Summary We are seeking an experienced Production Engineer to oversee and coordinate daily production activities within our Aluminum Factory. The role will be responsible for ensuring efficient fabrication, optimal resource utilization, quality compliance, and timely delivery of aluminum products and façade systems. Key Responsibilities Plan, coordinate, and monitor daily production activities to achieve production targets and delivery schedules. Review approved shop drawings, cutting lists, and production orders before releasing work to the factory floor. Coordinate with Design, Estimation, Procurement, Stores, QA/QC, and Project teams to ensure smooth production flow. Monitor fabrication activities for aluminum systems, including cutting, machining, assembly, glazing, and packing. Ensure the availability of materials, aluminum profiles, glass, hardware, accessories, and other production requirements. Prepare and maintain production schedules and track progress against planned targets. Optimize manpower, machinery, and material utilization to improve productivity and minimize wastage. Identify production bottlenecks and implement corrective actions to avoid delays. Ensure all fabricated products comply with approved drawings, specifications, quality standards, and project requirements. Coordinate with QA/QC teams to address non-conformities and implement corrective and preventive actions. Monitor production costs, material wastage, and resource consumption and recommend cost-saving measures. Support continuous improvement initiatives to enhance factory efficiency, productivity, and workflow. Ensure compliance with health, safety, and factory operating procedures. Prepare daily, weekly, and monthly production reports and present updates to management. Coordinate with project and logistics teams to ensure timely completion and dispatch of finished products. Provide technical guidance and support to production supervisors and factory personnel. Requirements Bachelor’s degree in Mechanical, Industrial, Manufacturing, Civil, or a related Engineering discipline. Minimum 5–8 years of experience in production engineering, preferably within an Aluminum, Façade, Curtain Wall, Glazing, or Aluminum Fabrication Factory. Strong knowledge of aluminum fabrication processes and factory production workflows. Experience in reading and interpreting shop drawings, fabrication drawings, and cutting lists. Knowledge of aluminum systems, profiles, hardware, glazing, and façade components is highly preferred. Experience in production planning, scheduling, manpower allocation, and resource management. Strong understanding of quality control and production efficiency. Proficiency in Microsoft Excel and ERP/production management systems; Auto CAD knowledge is an advantage. Strong problem-solving, coordination, and leadership skills. UAE/GCC experience in a similar industry is preferred.

<ul><li><p><br>Review labor, parts, and service order line items to ensure accurate cost allocation and job costing.</p></li><li><p>Prepare proforma and final customer invoices accurately and efficiently.</p></li><li><p>Process labor and parts discounts in line with company policies and approvals.</p></li><li><p>Raise and manage Local Purchase Orders (LPOs) for sublet services and purchased items.</p></li><li><p>Perform Goods Receipt (GR) and Invoice Verification (IV) activities.</p></li><li><p>Monitor open LPOs and coordinate timely closure with relevant departments.</p></li><li><p>Ensure service records and documentation are properly maintained and filed.</p></li><li><p>Support incentive and overtime calculations for operational teams.</p></li><li><p>Maintain compliance with company financial controls and operational procedures.</p></li><li><p>Contribute to the smooth operation of the workshop through accurate administrative support.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong attention to detail and numerical accuracy.</p></li><li><p>Good knowledge of SAP and related business processes.</p></li><li><p>Strong Microsoft Excel and MS Office skills.</p></li><li><p>Excellent communication and interpersonal skills.</p></li><li><p>Ability to manage multiple priorities and work under pressure.</p></li><li><p>Strong organizational and coordination skills.</p></li><li><p>Problem-solving mindset with a focus on accuracy and efficiency.</p></li><li><p>Ability to work effectively within a team-oriented environment.</p></li></ul><br><p><strong>About the Team</strong></p><p>The <strong>BYD Aftersales Team</strong> is committed to delivering an exceptional ownership experience for our customers. You will work alongside experienced automotive professionals supporting one of the world's fastest-growing electric vehicle brands. This is an exciting opportunity to be part of a business shaping the future of mobility across the UAE.</p><br><p><strong>What Equips You for the Role</strong></p><ul><li><p>High School Diploma or equivalent qualification.</p></li><li><p>Minimum <strong>2 years of experience</strong> in a Cost Clerk, Service Administration, Aftersales Administration, or similar role.</p></li><li><p>Experience within the automotive industry is highly preferred.</p></li><li><p>Working knowledge of SAP.</p></li><li><p>Strong Excel and reporting capabilities.</p></li><li><p>Good understanding of workshop or service center operations.</p></li><li><p>Excellent communication, teamwork, and coordination skills.</p></li><li><p>Ability to work accurately in a fast-paced environment.</p></li></ul>

Live your potential with DFS Aviation Services We are a part of the DFS Group, one of the largest air navigation service providers in the world. We focus on the provision of air navigation services and the sale of software solutions, consulting, training services to airports and air navigation service providers worldwide. As a modern aviation company, we guarantee the perfect mix of proven experience and progressive ideas. High quality standards are just as much part of our philosophy as a lean organization, international networking and honest ambitions. We offer our employees and associates challenging and creative jobs with one of the most secure and attractive employers in Germany, in one of the most exciting industries.<br>Discover What's Possible DFS Aviation Services are currently looking for a Safety Investigator to take responsibility in conducting investigations into safety-related occurrences in line with GCAA and ICAO regulatory requirements, as well as dans internal Safety Management Manual (SMM). The role contributes to organizational learning by identifying causal and contributing factors and ensuring that investigation outputs support continuous safety improvement.<br>We are looking for a candidate who can communicate effectively, demonstrate strong problem-solving and decision-making skills under pressure, and work closely with our stakeholders with professionalism and discretion.<br>This opportunity will be with Dubai Air Navigation Services (dans). Dans provides air navigation services at four airports in the UAE, one of which is the world's busiest airport for international passengers, where their mission is to empower and develop all their people in delivering world-leading air navigation services that exceed every standard, assure their customers, and shape global innovation.<br>In this role you will be based in Al Maktoum Airport (DWC) with regular visits to Dubai International Airport (DXB), reporting directly to the Safety Team Leader.<br>Your Responsibilities Conduct investigations into safety incidents and occurrences in compliance with ICAO Annex 13, GCAA CARs, and dans policies and procedures. Complete structured investigation outputs including causal analysis and clearly defined safety recommendations to prevent recurrence in line with dans safety methodologies. Ensure all investigation activities are conducted with professionalism, objectivity, and in strict confidentiality. Support operational units in implementing safety recommendations and contribute to effective resolution of findings. Escalate significant non-conformities, safety performance concerns, or trends to the Team Leader Safety in a timely manner. Contribute to the development, review, and enhancement of investigation processes, guidance materials, and documentation in line with evolving best practices and regulatory requirements. Support the delivery of safety awareness sessions and investigation-related training for operational personnel. Identify opportunities to improve investigation techniques and tools based on case experience and international developments. Contribute to the development of just culture principles and promote a learning-focused approach to incident management.<br>Your Qualifications Validated ratings in both Aerodrome and Approach Radar Control for a minimum of 5 years at a major international airport. Certified in incident investigation methodology (ICAO or equivalent). Proven experience in applying safety investigation techniques, risk assessments, and systemic safety analysis. Professional certification in a relevant field from an accredited university is preferable. Completion of SMS, auditing, and instructional techniques courses is preferable. OJTI/LCE endorsements is preferable. Experience in supporting or delivering investigation-related training is advantageous. Proficiency in MS Office tools and safety database/reporting systems. Fluency in written and spoken English is essential. Excellent communication and organisational skills.<br>What you get A competitive salary package, that is excellent compared to industry standards. An annual airfare allowance to visit your family and friends at home, contribution to your children's school costs, excellent medical insurance coverage for all our employees, life insurance. Work life balance based on fair, transparent and employee-friendly shift models, working hours and a generous leave entitlement. Corporate culture which is characterized by professionalism, which has focused on staff and client needs for decades.<br>Working @ DASWorking at DFS Aviation Services means working in a diverse and dynamic team of professionals being passionate about advancing aviation safety and efficiency. Since 2017, the #DASTeam has grown to over 400 team members participating in various air traffic management projects at 17 locations in 6 countries.<br>Our people come from a variety of backgrounds, bringing unique skills and perspectives that enrich our company culture and drive innovation in air traffic management. From air traffic controllers to software developers and engineers, and from project managers to customer service experts, our #DASTeam works collaboratively to ensure the skies remain safe for every one of us.

<ul><li><p>Verify petty cash according to the Petty Cash policy.</p></li><li><p>Ensure all petty cash documents have paid stamps and original bills.</p></li><li><p>Verify and tally all supporting documents with claims.</p></li><li><p>Reject claims exceeding the threshold of AED 5000 per voucher as per policy.</p></li><li><p>Highlight vouchers older than one month to Team Lead.</p></li><li><p>Ensure payroll related reimbursements do not go through petty cash.</p></li><li><p>Review the accuracy of VAT codes.</p></li><li><p>Process reimbursement requests via standard cash journal functionality.</p></li><li><p>Post petty cash expenses for Co 2060 and move to respective Company through ICM.</p></li><li><p>Handle petty cash queries and execute payment runs, reviewing exceptions.</p></li><li><p>Book customer refunds and process payments.</p></li><li><p>Create ZFI_Factl file for FAB card payment.</p></li><li><p>Maintain petty cash master file and apply and close prepaid cards.</p></li><li><p>Verify, approve, and process purchase float documents.</p></li><li><p>Ensure GL account 110004 clearing with zero balance.</p></li><li><p>Clear payments from GL 160516 once settled via FAB card.</p></li><li><p>Perform monthly reconciliation of GL 160516.</p></li><li><p>Collect and match periodic petty cash counts.</p></li><li><p>Discuss changes to SOPs with line manager and update in Blueworks.</p></li><li><p>Notify Team Lead of changes in roles and responsibilities promptly.</p></li><li><p>Ensure passport control and release for high financial risk cashiers.</p></li><li><p>Perform float analysis to maintain adequate imprest balance.</p></li><li><p>Conduct peer review of petty cash payments.</p></li><li><p>Adhere to SLA & company policy.</p></li><li><p>Provide backup for team members for payments.</p></li><li><p>Participate in process standardization and improvement initiatives for efficiency.</p></li><li><p>Match balance confirmation with claims in SAP bi-annually and annually.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Required Skills To Be Successful:</strong></p><ul><li><p>Proficiency in SAP and ERP systems.</p></li><li><p>Strong analytical and process-oriented skills.</p></li><li><p>Excellent communication and organizational abilities.</p></li><li><p>Detail-oriented capability with a focus on compliance and standards.</p></li></ul><p><br><strong>What Qualifies You For The Role:</strong></p><ul><li><p>Finance Graduate or Semi-qualified or equivalent qualifications.</p></li><li><p>3-5 years of similar experience with good ERP system knowledge.</p></li><li><p>Knowledge of SAP, Excel, PowerPoint, and Microsoft office tools.</p></li><li><p>Detail-oriented, organized, and excellent communication skills.</p></li></ul><br></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In this role, you will lead the commercial evaluation of landmark architectural projects. You will be responsible for transforming complex architectural blueprints into highly accurate material take-offs, cost estimates, and winning competitive bids for unitized systems, stick façades, and ACP cladding. Key Responsibilities: Precision Take-offs: Execute detailed quantity take-offs (BOQs) from architectural drawings. Cost Optimization: Build comprehensive cost structures for materials, fabrication, site labor, and logistics. Value Engineering: Identify cost-saving alternatives without compromising on structural specs or local Civil Defense codes. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements: Education: Bachelor’s Degree in Civil/Mechanical Engineering or Quantity Surveying. Experience: 5+ years of dedicated façade/aluminium estimation experience. Estimation Engines: Proficient in LogiKal (Orgadata), ReynaPro, or SchücoCal. CAD &amp; Take-offs: Expert level in AutoCAD, Bluebeam, or PlanSwift. System Familiarity: Strong working knowledge of major systems like Schüco, Reynaers, Technal, or Alupco. Typologies: Experienced in Unitized, Stick, Spider systems, Skylights, and Cladding.</p><p></p></section>

Core Responsibilities1. Market Intelligence Parachute into a chosen emerging market (e.g., Bolivia) and, in the shortest time possible, get clear on: who the target users are, how they currently buy and sell stablecoins, where the pain points are, which competitors and local players exist, and the real state of regulation and payment rails. Turn this into first-hand, decision-ready intelligence—not recycled second-hand reports.<br>2. GTM Strategy (co-create) and Execution (own) Build the full market-entry playbook together with the CEO, product, and operations—then own the execution independently: how the first 100 seed users are acquired, how the first 1,000 funded-active users are acquired, and the CAC hypothesis and validation for each channel.<br>3. Growth & Acquisition Design and personally test acquisition channels: diaspora communities, Telegram/Whats App/X communities, local KOLs/micro-influencers, community OTC agents, campus and savings groups (e.g., chama/SACCO-type), referral mechanics, and more. Prove a repeatable acquisition model on a minimal budget, and own retention—not just sign-ups.<br>4. Localized Brand Not a VI kit that looks good at HQ, but HPX's brand delivered in a way local users trust: localized messaging, trust narratives (compliance, reserves, security), and social/content presented in the local language and cultural context.<br>5. Community Penetration Find and enter the genuinely active crypto / remittance / freelancer / importer communities in the market, build HPX's presence and word-of-mouth inside them, and turn communities into a flywheel for acquisition and retention.<br>6. Team Building Start as an individual contributor; once the playbook works, recruit and lead a lean 2–3 person team (which may include local growth, community, and content roles).<br>Who We're Looking For (must-haves)- Proven hands-on "market entry / 0-to-1 growth" experience—ideally launching a to-C fintech, crypto, payments, remittance, or e-commerce business in an emerging market (Africa, Lat Am, South Asia, Southeast Asia, Central Asia). Having actually taken a product into a new country and generated real, retained users is the single most important bar for this role.- An operator, not a pure strategist / pure brand / pure media buyer. Can shape the playbook and roll up their sleeves to work communities, close KOL deals, test channels, and read the data.- Owner mindset on growth metrics: accountable for CAC, retention, and unit economics—not for "impressions" or "follower counts."- Moves fast under ambiguity: the markets we enter are often data-poor with immature infrastructure. You can make calls on incomplete information, experiment quickly, and course-correct.- Cultural sensitivity and on-the-ground ability: willing to travel frequently, and even embed short-term in the target market, and to build real relationships with locals.- Language: fluent English required;- Works side-by-side: this role is based in Dubai, working closely with the CEO, at a pace where "when we have an idea, the whole team executes fast."

About the Role<br>For most brands, the journey ends at purchase. For us, that’s where it begins.<br>We sell reliable smartphones and the trusted after-sales services that keep them working. We make device ownership affordable. We are opening our first market, and we are looking for the person who will build the marketing operation on the ground.<br>This is a build, not a handover. No team yet. No playbook. No retail presence. You write all three.<br>What you'll do• Build the launch operation from zero — brand assets, packaging, signage, shop openings, campaigns• Build and run the retail and mobile operator partnerships• Own the budget and the cost per acquisition, measured per unit sold, not estimated• Turn the first opening into a playbook the next twenty run on• Hire and lead the country marketing managers as each new market comes online<br>What you need• 8+ years in marketing, with real commercial ownership — budget, CAC or revenue• Built a marketing operation somewhere where one didn't exist• Worked on the ground in African or comparable emerging consumer markets, not from a regional hub• Retail, distribution and mobile operator partnership experience• Hired and led marketing people in-market, not only managed a central team• Willingness to spend extended periods in the launch market. This is not a remote role.<br>Based in Dubai. Reporting to the CEO. Frequent travel to our launch markets in Africa

???? We’re Hiring: POS Integration Specialist???? Location: United Arab Emirates (Remote)???? Employment Type: Part-Time???? Experience Level: Mid-Level to Senior???? Work Arrangement: Fully Remote About UsWe are a technology-focused organization supporting modern retail and payment environments through reliable systems, connected platforms, and efficient digital operations. Our teams work across technology, retail, finance, and business functions to ensure transactions and operational data move securely and accurately. We value technical expertise, problem-solving, reliability, and continuous innovation. The Role We are seeking an experienced POS Integration Specialist to support the integration, configuration, and ongoing performance of point-of-sale systems and connected business platforms. In this part-time, fully remote role, you will troubleshoot integration issues, coordinate technical requirements, monitor transaction flows, and collaborate with internal teams and technology partners. The ideal candidate has strong integration knowledge, attention to detail, and the ability to translate technical issues into practical solutions that minimize disruption to retail operations. Key Responsibilities Support integration between POS platforms and connected business systems. Configure and maintain interfaces, APIs, data exchanges, and integration workflows. Investigate transaction failures, synchronization issues, and system connectivity problems. Monitor integration performance and identify recurring technical issues. Coordinate with development, infrastructure, payment, and vendor teams to resolve incidents. Support POS configuration changes, upgrades, testing, and deployment activities. Validate transaction and data flows to ensure accuracy and consistency. Maintain technical documentation, integration procedures, and troubleshooting records. Assist with testing new integrations and system enhancements before production release. Recommend improvements that strengthen reliability, performance, and operational efficiency. Requirements Bachelor’s degree or equivalent qualification in IT, Computer Science, or a related field preferred.3+ years of relevant POS, systems integration, application support, or retail technology experience preferred. Strong understanding of POS environments, system integrations, and transaction workflows. Knowledge of APIs, data interfaces, databases, and system connectivity concepts. Familiarity with retail, payment, inventory, or enterprise business systems is advantageous. Proficiency in troubleshooting integration and transaction-related issues. Strong analytical and problem-solving abilities with excellent attention to detail. Good understanding of testing, deployment, and technical documentation practices. Strong communication skills for working with technical and non-technical stakeholders. Ability to manage multiple priorities independently in a remote environment. What We Offer Flexible part-time hours within a fully remote working environment. Competitive compensation aligned with experience and responsibilities. Opportunities to strengthen POS, integration, and retail technology expertise. Exposure to international technology, payment, and business operations. Opportunities to contribute to integration improvements and digital transformation initiatives. A collaborative environment focused on technical excellence, reliability, and continuous learning.

<ul><li><p>Be responsible for providing and coordinating patient care, educating patients and the public about various health conditions, and providing advice and emotional support to patients and their family members.</p></li><li><p>Assess and identify patients' needs and implement and monitor the patient's medical plan and treatment. They will work with a team of physicians and other health care specialists or allied health in various settings.</p></li><li><p>Perform systematic patient assessment, re-assessment and collect pertinent data about the patient’s health or situation.</p></li><li><p>Understand and analyse the assessment information and data.</p></li><li><p>Determine actual and potential nursing diagnoses, problems, and issues.</p></li><li><p>Define the predicted and expected outcomes of the patient’s planned care.</p></li><li><p>Create and evaluate patient care plans with the interprofessional team, in collaboration with the patient and patient's bystanders.</p></li><li><p>Record vital signs, recognize,&nbsp;address&nbsp;and escalate all abnormalities.</p></li><li><p>Maintain and update technical and clinical skills related to nursing practice.</p></li><li><p>Employ strategies to promote patients’ health and a safe environment.</p></li><li><p>Understand different diagnostic tests and laboratory&nbsp;examinations.</p></li><li><p>Perform essential life support as per regulatory requirements&nbsp;and scope such as&nbsp;but not limited to Basic Life Support, Pediatric Advanced Life Support, Advanced Cardiac Life Support, Neonatal Resuscitation etc.</p></li><li><p>Prepare patients for medical examination and treatment.&nbsp;</p></li><li><p>Administer medications and monitor patients for any side effects and reactions.</p></li><li><p>Administer treatments such as IV fluids or blood products and monitor patients for any reactions.&nbsp;</p></li><li><p>Provide wound care management.</p></li><li><p>Assist in medical procedures invasive or non-invasive as needed.&nbsp;</p></li><li><p>Facilitate the process of safe patient`s admission, transfer and discharge.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Essential:&nbsp;</strong><em>the post holder must</em></p><ul><li><p>Have an appropriate license to work as a&nbsp;registered nurse in the relevant regulatory health authority with all the&nbsp;qualifications and experience these mandates.</p></li><li><p>Manage their own professional re-licensure.</p></li><li><p>Hold a valid American Heart Associatio<strong>n</strong> Basic Life Support Provider card.</p></li><li><p>Be willing to work across departments when necessary.&nbsp;</p></li><li><p>Be able to communicate clearly and effectively in English (spoken and written)</p><br></li></ul><p><strong>DESIRABLE: The post holder <em>should have</em>:</strong></p><ul><li><p>Evidenced ability to work as part of&nbsp;an inter-professionalteam.</p></li><li><p>Organizational and administrative skills with which to use the electronic medical record platform for clinical documentation.</p></li><li><p>Be able to communicate effectively in Arabic</p></li></ul></li></ul>

Role Description This part-time hybrid role is based in Dubai, with a mix of on-site responsibilities and some work-from-home flexibility. The Regional Manager / Assistant Store Manager / Retail Assistant will oversee daily store operations, support regional retail initiatives, and help ensure a smooth customer experience. Key tasks include monitoring inventory, assisting with merchandising, coordinating staff schedules, and supporting the implementation of store policies and procedures. The role also involves handling customer inquiries and concerns, supporting loss prevention activities, tracking store performance metrics, and collaborating with the wider team to improve store efficiency and customer satisfaction.<br>Qualifications<br> Candidates should possess strong Customer Service and Customer Satisfaction skills to ensure positive experiences for visitors and shoppers. Candidates should possess effective Communication skills for interacting with customers, colleagues, and regional stakeholders. Candidates should possess Store Management and Retail-related skills to support daily operations, team coordination, and visual merchandising. Candidates should possess Retail Loss Prevention awareness to help maintain a secure environment and protect store assets. Candidates should have basic proficiency with point-of-sale systems and retail software, along with good numerical and reporting skills. Candidates should demonstrate reliability, attention to detail, and the ability to work collaboratively in a hybrid work setting. Prior experience in retail, store supervision, or regional coordination is preferred; vocational or academic training in business, retail management, or a related field is an advantage.

Role: Go Software Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: Competitive, based on experience<br>Role Overview:We are hiring for one of our clients to build the next generation of dialog agents with wide-ranging applications in education, entertainment, and question-answering systems. The role involves close collaboration with cross-functional teams to define, design, and deliver new features.<br>Key Responsibilities:• Review AI-generated code and solutions to ensure adherence to quality standards and development best practices• Organize development cycles, set priorities, and define project goals and deadlines• Resolve complex coding issues using Go expertise during AI validation and system integration• Verify accuracy, efficiency, and dependability of AI-generated code through validation processes• Analyze code, provide constructive feedback, and foster a collaborative environment that encourages innovation and continuous improvement<br>Required Skills & Qualifications:• Bachelor’s or master’s degree in engineering, computer science, or equivalent experience• At least 3+ years of relevant software engineering experience, with a proven ability to lead teams• In-depth knowledge of Go programming language and software development best practices• Experience with AI systems and code-creation technologies, including LLM model training• Proactive contribution to public Git Hub repositories, including feature development and code refactoring for large codebases<br>More About the Opportunity:This role offers a unique opportunity to contribute to cutting-edge AI technology that powers open-ended, collaborative dialogues. The company is building scalable backend components to support high-quality LLM training and deployment across diverse frameworks.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Role: Go Software Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: Competitive, based on experience<br>Role Overview:We are hiring for one of our clients to build the next generation of dialog agents with wide-ranging applications in education, entertainment, and question-answering systems. The role involves close collaboration with cross-functional teams to define, design, and deliver new features.<br>Key Responsibilities:• Review AI-generated code and solutions to ensure adherence to quality standards and development best practices• Organize development cycles, set priorities, and define project goals and deadlines• Resolve complex coding issues using Go expertise during AI validation and system integration• Verify accuracy, efficiency, and dependability of AI-generated code through validation processes• Analyze code, provide constructive feedback, and foster a collaborative environment that encourages innovation and continuous improvement<br>Required Skills & Qualifications:• Bachelor’s or master’s degree in engineering, computer science, or equivalent experience• At least 3+ years of relevant software engineering experience, with a proven ability to lead teams• In-depth knowledge of Go programming language and software development best practices• Experience with AI systems and code-creation technologies, including LLM model training• Proactive contribution to public Git Hub repositories, including feature development and code refactoring for large codebases<br>More About the Opportunity:This role offers a unique opportunity to contribute to cutting-edge AI technology that powers open-ended, collaborative dialogues. The company is building scalable backend components to support high-quality LLM training and deployment across diverse frameworks.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Role: Go Software Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: Competitive, based on experience<br>Role Overview:We are hiring for one of our clients to build the next generation of dialog agents with wide-ranging applications in education, entertainment, and question-answering systems. The role involves close collaboration with cross-functional teams to define, design, and deliver new features.<br>Key Responsibilities:• Review AI-generated code and solutions to ensure adherence to quality standards and development best practices• Organize development cycles, set priorities, and define project goals and deadlines• Resolve complex coding issues using Go expertise during AI validation and system integration• Verify accuracy, efficiency, and dependability of AI-generated code through validation processes• Analyze code, provide constructive feedback, and foster a collaborative environment that encourages innovation and continuous improvement<br>Required Skills & Qualifications:• Bachelor’s or master’s degree in engineering, computer science, or equivalent experience• At least 3+ years of relevant software engineering experience, with a proven ability to lead teams• In-depth knowledge of Go programming language and software development best practices• Experience with AI systems and code-creation technologies, including LLM model training• Proactive contribution to public Git Hub repositories, including feature development and code refactoring for large codebases<br>More About the Opportunity:This role offers a unique opportunity to contribute to cutting-edge AI technology that powers open-ended, collaborative dialogues. The company is building scalable backend components to support high-quality LLM training and deployment across diverse frameworks.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Role: Go Software Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: Competitive, based on experience<br>Role Overview:We are hiring for one of our clients to build the next generation of dialog agents with wide-ranging applications in education, entertainment, and question-answering systems. The role involves close collaboration with cross-functional teams to define, design, and deliver new features.<br>Key Responsibilities:• Review AI-generated code and solutions to ensure adherence to quality standards and development best practices• Organize development cycles, set priorities, and define project goals and deadlines• Resolve complex coding issues using Go expertise during AI validation and system integration• Verify accuracy, efficiency, and dependability of AI-generated code through validation processes• Analyze code, provide constructive feedback, and foster a collaborative environment that encourages innovation and continuous improvement<br>Required Skills & Qualifications:• Bachelor’s or master’s degree in engineering, computer science, or equivalent experience• At least 3+ years of relevant software engineering experience, with a proven ability to lead teams• In-depth knowledge of Go programming language and software development best practices• Experience with AI systems and code-creation technologies, including LLM model training• Proactive contribution to public Git Hub repositories, including feature development and code refactoring for large codebases<br>More About the Opportunity:This role offers a unique opportunity to contribute to cutting-edge AI technology that powers open-ended, collaborative dialogues. The company is building scalable backend components to support high-quality LLM training and deployment across diverse frameworks.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Role: Go Software Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: Competitive, based on experience<br>Role Overview:We are hiring for one of our clients to build the next generation of dialog agents with wide-ranging applications in education, entertainment, and question-answering systems. The role involves close collaboration with cross-functional teams to define, design, and deliver new features.<br>Key Responsibilities:• Review AI-generated code and solutions to ensure adherence to quality standards and development best practices• Organize development cycles, set priorities, and define project goals and deadlines• Resolve complex coding issues using Go expertise during AI validation and system integration• Verify accuracy, efficiency, and dependability of AI-generated code through validation processes• Analyze code, provide constructive feedback, and foster a collaborative environment that encourages innovation and continuous improvement<br>Required Skills & Qualifications:• Bachelor’s or master’s degree in engineering, computer science, or equivalent experience• At least 3+ years of relevant software engineering experience, with a proven ability to lead teams• In-depth knowledge of Go programming language and software development best practices• Experience with AI systems and code-creation technologies, including LLM model training• Proactive contribution to public Git Hub repositories, including feature development and code refactoring for large codebases<br>More About the Opportunity:This role offers a unique opportunity to contribute to cutting-edge AI technology that powers open-ended, collaborative dialogues. The company is building scalable backend components to support high-quality LLM training and deployment across diverse frameworks.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Role: Go Software Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: Competitive, based on experience<br>Role Overview:We are hiring for one of our clients to build the next generation of dialog agents with wide-ranging applications in education, entertainment, and question-answering systems. The role involves close collaboration with cross-functional teams to define, design, and deliver new features.<br>Key Responsibilities:• Review AI-generated code and solutions to ensure adherence to quality standards and development best practices• Organize development cycles, set priorities, and define project goals and deadlines• Resolve complex coding issues using Go expertise during AI validation and system integration• Verify accuracy, efficiency, and dependability of AI-generated code through validation processes• Analyze code, provide constructive feedback, and foster a collaborative environment that encourages innovation and continuous improvement<br>Required Skills & Qualifications:• Bachelor’s or master’s degree in engineering, computer science, or equivalent experience• At least 3+ years of relevant software engineering experience, with a proven ability to lead teams• In-depth knowledge of Go programming language and software development best practices• Experience with AI systems and code-creation technologies, including LLM model training• Proactive contribution to public Git Hub repositories, including feature development and code refactoring for large codebases<br>More About the Opportunity:This role offers a unique opportunity to contribute to cutting-edge AI technology that powers open-ended, collaborative dialogues. The company is building scalable backend components to support high-quality LLM training and deployment across diverse frameworks.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

We are looking for a hands-on leader to own cloud and security across Amana. This person is the senior authority for application security, cloud architecture, cloud security, and the engineering practices that keep our systems resilient. The title reflects the breadth of accountability, not the scale of a corporate hierarchy. Amana is a small company, and this role leads a compact function while remaining personally involved in the work. The right person has already led a small technical security team and is comfortable operating as its most senior engineer, initially supported by one engineer or analyst. They can review architecture, challenge engineering decisions, set priorities, and own outcomes across cloud, application security, vulnerability management, and incident readiness.<br>What you’ll do<br>Own cloud and security across our customer-facing and internal platforms, including application security, cloud architecture, security standards, and operational risk. Review product, engineering, and cloud designs for security and resilience risks before they become production issues. Run threat modeling for new features, integrations, APIs, authentication flows, payments, trading, admin tools, and data handling. Work directly with engineering and Dev Ops teams to identify, prioritize, and resolve vulnerabilities and control gaps across applications, architecture, cloud configuration, CI/CD, secrets, IAM, and access control. Lead secure architecture reviews across web, mobile, backend, AWS, GCP, and third-party integrations. Build a practical security program around the risks that matter most: account takeover, data leakage, privilege escalation, fraud vectors, API abuse, insecure admin access, supply chain risk, and production misconfiguration. Own vulnerability management across applications, cloud assets, dependencies, and infrastructure. Drive penetration testing, security assessments, remediation plans, and follow-through. Set and improve cloud and security controls for identity, access, network boundaries, secrets, logging, alerting, resilience, and production change management. Partner with engineering to make secure delivery part of normal delivery, not a separate ceremony. Support compliance and regulatory expectations with evidence, controls, and clear technical ownership. Prepare the company for security incidents: playbooks, escalation paths, logging coverage, tabletop exercises, and post-incident review. Lead a compact cloud and security function, initially the Head plus one engineer or analyst, including prioritization, work allocation, coaching, and accountability. Work directly with technology leadership on security priorities, trade-offs, and risk acceptance.<br>Essential skills and experience<br>10+ years across application security, cloud security, security engineering, platform engineering, Dev Sec Ops, or related technical security roles. Prior experience in fintech, banking, payments, trading, brokerage, crypto, or another regulated environment. Strong practical application security experience at architecture and system level: threat modeling, authentication, authorization, session management, API security, secure design, secrets handling, business logic abuse, and secure SDLC. Strong technical literacy and the ability to work directly with engineers. You should be able to understand and challenge code-level findings, but routine source-code review is not the primary responsibility of this role. Deep practical understanding of cloud architecture and security across AWS and GCP, including the judgment to set standards and challenge implementation decisions. Strong knowledge of IAM, RBAC, networking, WAF, logging, monitoring, secrets management, encryption, key management, and least privilege design. Strong working knowledge of cloud infrastructure, CI/CD, infrastructure as code, Linux, reliability, and production operations. This is not a Kubernetes specialist role. Experience running or coordinating penetration tests, vulnerability scans, dependency scanning, SAST/DAST, cloud posture reviews, and remediation tracking. Good judgment on risk. Able to separate theoretical issues from problems that can actually hurt the business. Experience working with compliance, audit, legal, product, and engineering without turning security into paperwork theatre. Strong written communication. Able to explain technical risk clearly to executives and engineers. Proven experience leading a small technical team while remaining personally hands-on, including setting priorities, allocating work, coaching, and owning outcomes. Our office is in the UAE, and onsite presence is preferred, but we are open to remote candidates.<br>Strongly preferred<br>Experience securing trading platforms, investment products, wallets, payments, onboarding/KYC flows, or financial APIs. Experience with modern web, mobile, and backend application stacks. Prior software engineering experience is an advantage. Experience with cloud incident response, breach investigation, forensics basics, or security monitoring. Security certifications such as CISSP, CSSLP, OSCP, AWS Security Specialty, GCP Professional Cloud Security Engineer, or other credible security certifications. Experience with bug bounty programs or external researcher intake. Experience building security programs in companies where engineering speed still matters.<br>What this role is not<br>This is not a classic Head of Dev Ops role. This person will not run every deployment or production operations ticket, but will remain accountable for cloud architecture, security standards, and cloud risk. This is not a platform empire role. The priority is effective ownership of cloud and security, not building a large Dev Ops or platform organization. This is not a policy-only security role. This person must be able to inspect systems, review application and cloud architecture, challenge engineering decisions, and work with engineers until material risks are resolved. This is not a large management role. The function is expected to remain compact, initially the Head plus one engineer or analyst.<br>What success looks like<br>Our most important applications have clear threat models and known risk owners. Critical vulnerabilities are found earlier and fixed faster. Cloud architecture, production access, secrets, IAM, network boundaries, and admin surfaces are controlled and reviewed. Security issues are tracked with the same seriousness as product and engineering work. Penetration tests produce fewer surprises over time. Engineering teams know what good security looks like and can apply it without waiting for a committee. Leadership has a clear view of real security risk, not a long list of low-value findings.