وظائف فني نحاس في الإمارات

<p>A reputable company is seeking a dedicated Oil &amp; Gas Technician to support field operations, perform equipment maintenance, and ensure safe and efficient operations within oil and gas facilities. Candidates with technical experience are preferred.</p> <p>Responsibilities</p> <p>Perform inspection and maintenance of oil &amp; gas equipment<br /> Assist with installation and repair activities<br /> Monitor equipment performance and report issues<br /> Follow safety procedures and industry standards<br /> Maintain technical records and reports<br /> Support field operations as required</p> <p>Benefits</p> <p>Visa provided as per UAE Labor Law<br /> Medical insurance<br /> Career growth opportunities</p> <p>Location: Dubai, UAE<br /> Job Type: Full-Time</p> <p>Apply Now</p> <p>Email: edu@jamalschools.com</p> <p>Only shortlisted candidates will be contacted.</p>

<p><strong>Job Purpose</strong></p><p>To install, maintain, inspect, and repair air-conditioning and refrigeration systems while ensuring safe, efficient, and uninterrupted operation. The technician will also travel to different customer sites using a company vehicle.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Install, service, maintain, and repair split AC, window AC, package units, ducted systems, FCUs, AHUs, and VRF/VRV systems.</p></li><li><p>Diagnose electrical and mechanical faults in air-conditioning systems.</p></li><li><p>Perform preventive and corrective maintenance according to schedules.</p></li><li><p>Check compressors, motors, thermostats, control panels, capacitors, refrigerant levels, and electrical connections.</p></li><li><p>Carry out gas charging, leak testing, brazing, pressure testing, and vacuuming.</p></li><li><p>Clean filters, coils, condensers, drain lines, ducts, and other components.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>ITI, Diploma, or technical certification in HVAC, Refrigeration, Electrical, or a related field.</p></li><li><p>Minimum 3–5 years of experience as an AC/HVAC Technician.</p></li><li><p>Practical experience with residential and commercial air-conditioning systems.</p></li><li><p>Knowledge of electrical controls, wiring diagrams, refrigerants, and troubleshooting.</p></li><li><p>Basic English communication skills.</p></li><li><p>Ability to work independently and attend emergency service calls.</p></li><li><p><strong>Valid UAE driving licence is mandatory.</strong></p></li><li><p>Familiarity with UAE roads and locations is preferred.</p></li><li><p>Physically fit and willing to work outdoors or outside normal working hours when required.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Conduct thorough diagnostics and troubleshooting of complex systems, utilizing advanced tools to identify malfunctions and provide timely solutions.</li><li>Perform routine maintenance on equipment to ensure optimal performance and longevity, documenting all service activities for compliance.</li><li>Install, configure, and upgrade hardware and software components, ensuring compatibility and functionality in diverse environments.</li><li>Collaborate with engineers and other technicians to design and implement system modifications that enhance operational efficiency.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>A minimum of an Associate's degree in a relevant technical field, such as Electronics or Mechanical Engineering.</p></li><li><p>At least 2 years of hands-on experience in a technician role within a relevant industry, demonstrating practical knowledge and skills.</p></li><li><p>Certifications such as CompTIA A+, Cisco Certified Network Associate (CCNA), or equivalent are highly preferred.</p></li><li><p>Proficiency in troubleshooting and repairing electronic systems, with a strong understanding of circuit design and analysis.</p></li></ul><p></p></section>

<ul><li>Assist in diagnosing and repairing plumbing issues, including leaks, clogs, and faulty fixtures.</li><li>Support senior technicians in the installation and maintenance of water supply, drainage, and sanitation systems.</li><li>Perform routine inspections and preventative maintenance on plumbing equipment and pipelines.</li><li>Help with the assembly and fitting of pipes, valves, and other plumbing components according to specifications.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Industrial Training Institute Diploma 2 years in Pipe Fitting or Plumbing Maintenance or equivalent (post high school)</p></li><li><p>IOSH Working Safely Certificate or equivalent&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p></li><li><p>Minimum 3 year experience within a Facility Management or similar environment as Plumbing & Pump Technician.</p></li></ul>

Company Description Spark Est. Maintenance & Oil Fields Services operates in the energy and industrial sectors, providing technical maintenance and support services to oil field operations and heavy equipment users. The company focuses on reliable, safe, and efficient service delivery to keep critical machinery and vehicles operating at peak performance. Team members work in a hands-on, field-oriented environment where adherence to safety standards and timely problem-solving are essential. Spark Est. values skilled technicians who can contribute to operational continuity and support the demanding needs of clients in the United Arab Emirates.<br>Role Description The Heavy Duty Mechanical Technician is a full-time, on-site role based in the United Arab Emirates. This role involves inspecting, maintaining, and repairing heavy equipment and vehicles used in oil field and industrial operations. Day-to-day tasks include diagnosing mechanical issues, performing scheduled preventive maintenance, replacing faulty parts, and conducting functional tests to ensure equipment reliability and safety. The technician will document work performed, report equipment conditions, and coordinate with supervisors and other team members to minimize downtime. The role also requires following company and industry safety standards, keeping tools and work areas organized, and supporting continuous improvement in maintenance practices.<br>Qualifications<br> <br>Candidates should possess strong skills in Equipment Maintenance and Vehicle Maintenance for heavy-duty machinery and industrial vehicles. Candidates should possess hands-on experience with Heavy Equipment operation support and mechanical systems. Candidates should possess proven abilities in Equipment Repair and mechanical component replacement. Candidates should possess effective Troubleshooting skills for identifying and resolving mechanical and hydraulic faults. Relevant technical diploma or certification in mechanical engineering, automotive technology, or a related field. Previous experience as a heavy duty mechanic or mechanical technician, preferably in oil fields, construction, or industrial settings. Knowledge of safety regulations, lockout/tagout procedures, and safe use of tools and lifting equipment. Ability to read technical manuals, drawings, and service instructions; basic computer skills for maintenance reporting. Strong teamwork and communication skills, with the ability to work in varied outdoor and industrial environments.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>• To carry out effective and efficient repair and maintenance of customer vehicles following the approved manufacturers repair techniques<br>Responsibilities:<br>Functional Roles and Responsibilities<br>• Collect job orders and the necessary materials/ tools/ equipment, to carry out the repairs and maintenance on the customers vehicles in accordance with the manufacturers repair techniques.<br>• Ensure accurate fault diagnosis and effective utilization of time allocated for the repairs. Report to Team Leader of any delays in repairs due to unavailability of parts or any other reason.<br>• Ensure all additional repairs are authorized; parts are booked to the repair order. Incase of warranty repair/ parts exchange program , return removed part to the parts department in the same carton to facilitate audit processes and getting necessary credit if applicable. Incase of retail jobs keep the old parts inside the vehicle except batteries and parts which may cause stain on the interior trim/ carpet of the vehicle.<br>• Service personal tools, keep the lifts and work area clean and comply with the health and safety standards.<br>• Upgrade knowledge by regularly doing web based courses and by attending class room trainings.<br>• Keep all personal tools safe. Any breakages or accidents must be reported to the Team Leader / Supervisor immediately/Tool room for replacement.<br>• Ensure efficiency and productivity is maintained above 100%.<br>• Ensure proper clocking on/off in the system and do write up in the repair order as per the prescribed procedure.<br>• Any unused parts must be returned or stored properly as per company procedure. Used parts must be disposed in an environment friendly manner.<br>• To work extra hours incase the job needs to be completed to ensure customer satisfaction as per Team Leader’s requirement.<br>Qualifications:<br>Education/Certification and Continued Education<br>• Diploma in Automotive Engineering<br>• Industrial Technical Institute ITI ( 2 years vocational course) - Certified Auto Technician Course<br>Years of Experience<br>• 2 to 3 years experience as technician for Diploma holder<br>• 3to 5 years experience as a technician for ITI holder<br>Knowledge and Skills<br>• Industrial Technical Institute (ITI) certified Auto Technician Course.<br>• Vocational Automobile Training Course<br>• Diploma in Automotive Engineering<br>• Additional technical skills, if any, are an additional advantage.<br>• In addition to mechanical skills, should have basic electrical knowledge.<br>• Trouble shooting and problem solving skills<br>• Should have attended basic technical courses from Vehicle Manufacturing companies</span> </div>

???? Dubai, UAE???? Salary: AED 3,500/month???? Company accommodation???? Company transportation???? Employment visa???? Medical insurance???? 6 days/week, 8 hours/day<br>We are looking for an experienced and reliable Multi-Skilled Handyman / Maintenance Technician to be responsible for the day-to-day technical condition of our restaurant. The ideal candidate should be able to complete most maintenance and repair works independently and avoid using third-party contractors for minor issues whenever possible.<br>Main Responsibilities:• General restaurant maintenance and repairs• Painting, wall, gypsum and ceiling repairs• Basic electrical works such as lights, switches, sockets and minor troubleshooting• Basic plumbing works including leaks, taps, drainage and pipe connections• Minor MEP and AC-related troubleshooting• Repair of doors, locks, hinges, furniture, shelves and restaurant fixtures• Minor repairs of kitchen areas and equipment where possible and safe• Regular inspections and preventive maintenance• Identifying problems before they become serious or affect restaurant operations• Contacting suppliers or authorized service companies for equipment under warranty• Coordinating technician visits and following up until the issue is fully resolved• Checking that repaired equipment is working properly• Managing procurement of required spare parts, tools and maintenance materials• Keeping basic maintenance materials and commonly used spare parts organized and available Requirements:• Good hands-on experience in general maintenance• Knowledge of electrical, plumbing, painting, carpentry and basic MEP works• Restaurant, hotel or F&B maintenance experience is preferred• Ability to work independently and solve technical issues practically• Responsible, proactive and well organized• Able to communicate with suppliers and service companies when external support is required We are looking for someone who can take full responsibility for the restaurant’s daily maintenance and solve most technical issues independently.

<p>A Water Tank Cleaning Technician is responsible for the inspection, cleaning, disinfection, and maintenance of residential, commercial, and industrial water storage tanks in compliance with UAE health and safety regulations. The role ensures safe, hygienic water storage systems that meet standards set by local authorities such as Dubai Municipality. Technicians must follow approved procedures, use specialized cleaning equipment, and apply municipality-approved disinfectants to maintain water quality and public health standards.</p><ul><li><p>Inspect water tanks for contamination, sediment buildup, algae growth, and structural damage</p></li><li><p>Drain and remove sludge, dirt, and debris from tanks</p></li><li><p>Perform high-pressure cleaning and scrubbing of tank interiors</p></li><li><p>Apply approved disinfectants and ensure proper sterilization</p></li><li><p>Refill tanks and conduct water quality checks</p></li><li><p>Maintain proper documentation and service reports</p></li><li><p>Follow UAE safety regulations and confined space entry procedures</p></li><li><p>Use personal protective equipment (PPE) at all times</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>High School Certificate or equivalent (preferred)</p><p>Basic literacy and numeracy skills</p><p>Training in water tank cleaning and disinfection procedures</p><p>Knowledge of hygiene standards as per Dubai Municipality regulations</p><p>Certification in Confined Space Entry (preferred)</p><p>With UAE Driving license is advantage</p><p>Basic First Aid training (preferred)</p><p>•</p><p>Awareness of chemical handling and MSDS guidelines</p><p>•</p><p>Physically fit and able to work in confined spaces</p><p>•</p><p>No fear of heights (for overhead tank cleaning)</p><p>•</p><p>Ability to work in hot and humid conditions</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Performs necessary equipment &amp; scope (rigid &amp; flexible) pre &amp; post procedure check.</p></li><li><p>Pre and Post check to be done by the OT technicians for Rigid scopes where they are allotted to the case.</p></li><li><p>For all flexible scopes the checking will be done by the OT technicians.</p></li><li><p>Maintains files and records of all equipment’s &amp; scope</p></li><li><p>Performs pre- operative patient preparation.</p></li><li><p>Monitors and continually assesses the OT condition, including patient and surgical team requirements in co-ordination with other members of the team.</p></li><li><p>To scrub and assist in the case as and when allotted/ requested.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Good communication and interpersonal skills.</p></li><li><p>Service orientation and strong judgments and Problem solving skills.</p></li><li><p>Sound Analytical &amp; Technical Skills</p></li><li><p>Teamwork and spirit</p></li><li><p>DHA eligibility letter/license as OT technician </p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Perform precise sample preparation and analysis using advanced laboratory equipment and techniques.</li><li>Accurately record, document, and report experimental results, ensuring data integrity and compliance with protocols.</li><li>Maintain and calibrate laboratory instruments, troubleshooting issues to ensure optimal performance and accuracy.</li><li>Conduct quality control checks on reagents and supplies, verifying their suitability for experimental procedures.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Possess a Bachelor's degree or equivalent in a relevant scientific field (e.g., Biology, Chemistry, Biochemistry).</li><li>Hold certifications such as a Certified Laboratory Technician (CLT) or equivalent, demonstrating specialized knowledge.</li><li>Have 2-5 years of hands-on experience in a similar laboratory setting, applying theoretical knowledge to practical tasks.</li><li>Demonstrate proficiency in operating and maintaining specific laboratory instruments relevant to the industry.</li></ul><p></p></section>

Apprentice Technician for UAE National <br>Job Objective: <br>The Apprentice Technician will support and perform maintenance activities on aircraft and aviation components under the direct supervision, while developing technical skills and competencies as part of AMMROC Al Ruwad Apprenticeship Program. This role includes assisting qualified technicians with maintenance tasks, within the scope of the trainee’s training program and plans.<br>Key Accountabilities:<br>Receive and understand task requirements as briefed by the Supervisor or assigned Technician. Obtain, read, and comprehend applicable Aircraft/Component technical data under guidance. Assist in conducting basic maintenance tasks on aircraft or components aligned with assigned training modules and authorization limitations. Participate in all scheduled classroom and on-the-job training activities as part of the Al Ruwad Program. Participate and comply with safety brief instructions before beginning any maintenance activity. Conduct Foreign Object Damage (FOD) checks before and after task completion. Ensure correct use and return of tools, equipment, PPE, consumables, and test equipment according to procedures. Support accurate maintenance documentation as directed by the Supervisor or Technician. Keep the Supervisor informed of progress, challenges, or potential delays. Comply all relevant safety, quality, and environmental management requirements. Support ERP IT system data entry and related maintenance reporting tasks, when assigned. Uphold AMMROC policies, procedures, and values at all times. Participate in orientation programs, assessments, and evaluations as required by the training curriculum. Perform any other duties or assignments as directed.<br>Qualifications:<br>Completed National Service Diploma, Higher Diploma, or Bachelor’s Degree in Aircraft Maintenance, Aeronautical Engineering, Aircraft Engineering Technology (Aeromechanical), Mechanical Engineering, Electrical Engineering, or Electronic Engineering. Fresh graduate or with minimal experience outside the relevant engineering field Basic understanding of aircraft fundamentals is an advantage. No prior experience is required; training will be provided through Al Ruwad Program. Minimum IELTS 4.5 or equivalent.<br>Professional Skills:<br>Basic mechanical aptitude and strong willingness to learn. Ability to follow instructions, procedures and adhere to safety protocols. Strong teamwork and interpersonal skills. High level of discipline, attention to detail and accountability. Commitment to completing the apprenticeship program and professional development. Ability to communicate effectively in English (verbal and written). Basic skills in planning, organizing, and problem-solving.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Troubleshoot and diagnose complex mechanical, hydraulic, and pneumatic system malfunctions, minimizing downtime through rapid problem-solving.</li><li>Perform preventative maintenance on a wide range of industrial equipment, including machinery, pumps, and conveyors, ensuring optimal performance and longevity.</li><li>Conduct precision alignment and balancing of rotating equipment using laser alignment tools, reducing vibration and improving efficiency.</li><li>Fabricate and repair machine parts using welding, machining, and other metalworking techniques, restoring equipment to operational standards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Possesses a high school diploma or equivalent; a vocational or technical school certificate in industrial mechanics is highly preferred.</li><li>Holds relevant certifications, such as a Certified Maintenance Technician (CMT) or similar, demonstrating a commitment to professional development.</li><li>Demonstrates a minimum of 5 years of hands-on experience in industrial maintenance, working with diverse equipment and systems.</li><li>Exhibits a strong understanding of various industrial settings, including manufacturing, processing, or similar environments.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Overview of the role</p><p>We are looking for a skilled and experienced Diagnostic Master Technician to join our Retail Aftersales team in the UAE. The role is responsible for inspecting, diagnosing, and repairing vehicles using advanced diagnostic tools and the Fix It Right process to deliver high-quality customer experience and support customer retention in line with OEM standards.</p><p>What you will do</p><ul><li><p>Carry out advanced vehicle diagnosis, general repairs, periodic maintenance, advanced general repairs, and accessory fitment as per repair manuals and OEM standards.</p></li><li><p>Use diagnostic equipment and technical resources to identify vehicle faults accurately and complete repairs in line with the Fix It Right process.</p></li><li><p>Achieve productivity, utilization, and sold-hours targets set by the business.</p></li><li><p>Support the Technical Advisor with advanced general repair cases across hybrid, petrol, diesel, and hydrogen-powered vehicles.</p></li><li><p>Assist with Repair Support Requests, quality checks, road testing, and technical reporting where required.</p></li><li><p>Create Electronic Warranty Approval Requests in the Dealer Management System.</p></li><li><p>Maintain full compliance with 5S, health and safety procedures, quality control standards, and Electronic Vehicle Check reporting.</p></li><li><p>Support on-the-job training for technicians and help develop technical capability within the workshop team.</p></li><li><p>Ensure proper use, care, and inventory management of special service tools and general workshop tools.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Required skills to be successful</p><ul><li><p>Strong technical diagnosis and mechanical repair capability.</p></li><li><p>Advanced knowledge of diagnostic tools, repair manuals, wiring diagrams, and vehicle systems. Ability to write clear technical reports for advanced repair cases.</p></li><li><p>Ability to write clear technical reports for advanced repair cases.</p></li><li><p>Diploma, technical certification, ITI, Industrial Training Institute NCVT Certificate, or ITC qualification. Certified Technician qualification is required.</p></li></ul><p>About the team</p><p>You will be part of the Retail Aftersales team, working closely with the Workshop Supervisor, Technical Advisor, Controller, Team Leader, and other technicians. The team is focused on delivering efficient, accurate, and high-quality vehicle repairs while ensuring customer satisfaction, operational productivity, and compliance with OEM and workshop standards.</p><p>What equips you for the role</p><ul><li><p>5–7 years of experience as a Diagnostic Technician, preferably within a retail automotive environment.</p></li><li><p>Valid UAE driving license is required.</p></li><li><p>Strong knowledge of hybrid, petrol, diesel, and hydrogen-powered vehicle diagnosis and repair is an advantage.</p></li><li><p>Conversant English communication skills.</p></li><li><p>Ability to work independently, take ownership, and support the development of other technicians through coaching and on-the-job training.</p></li><li><p>Strong communication skills with the ability to work effectively in a multicultural team environment.</p></li><li><p>Self-motivated, resilient, and committed to continuous improvement and self-development.</p></li><li><p>Customer-focused mindset with a commitment to delivering quality repairs and improving customer satisfaction.</p></li><li><p>Kaizen mindset and willingness to share knowledge with others.</p></li><li><p>Ability to solve complex technical problems with accuracy and ownership.</p></li><li><p>Good understanding of quality control, workshop safety, and compliance standards.</p></li></ul></li></ul><p></p></section>

???? WE ARE HIRING – EXPERIENCED GLASS INSTALLATION TECHNICIANWe are looking for a skilled and experienced Glass Fitter / Installation Technician to join our professional team.???? Key Responsibilities:Installation of Shower Cabins / Enclosures Glass Partitions & Office Fit-outs Glass Handrails & Balustrades Mirrors & all types of glass works Accurate on-site measurement, cutting & fitting Ensure high-quality finishing and safety standards???? Requirements: ✅ Proven experience in glass installation (mandatory) ✅ Ability to read drawings & take precise measurements ✅ Knowledge of tools, hardware & installation techniques ✅ Strong attention to detail & finishing quality ✅ Problem-solving skills & teamwork attitude ✅ UAE experience (preferred)???? Salary: Based on experience and skills ???? Location: Al Ain, UAE ???? Employment Type: Full-time???? Interested and qualified candidates: ???? Send your CV via Whats App ???? 050 533 9484