وظائف مهندس ديكور - رأس الخيمة الإمارات

<p>Responsibilities</p><ul><li><p>Execute carpentry works for interior fit-out and decoration projects.</p></li><li><p>Fabricate and install <strong>MDF furniture, cabinets, wardrobes, counters, shelves, wall panels and decorative wooden features</strong>.</p></li><li><p>Manufacture and install custom-made furniture according to approved drawings and site measurements.</p></li><li><p>Perform accurate cutting, assembly, finishing and installation of MDF, plywood and other wood materials.</p></li><li><p>Read and understand <strong>shop drawings, technical drawings and measurements</strong>.</p></li><li><p>Carry out on-site modifications and adjustments when required.</p></li><li><p>Install hinges, drawer runners, handles and other furniture accessories and hardware.</p></li><li><p>Operate carpentry tools and machinery safely and correctly.</p></li><li><p>Coordinate with supervisors and other site teams to complete work according to project requirements.</p></li><li><p>Maintain high standards of workmanship, accuracy and finishing quality.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p>Requirements</p><ul><li><p>Minimum <strong>3 years of practical carpentry experience</strong>.</p></li><li><p>Strong experience in <strong>MDF and custom furniture fabrication</strong>.</p></li><li><p>Previous experience in <strong>interior fit-out and decoration projects</strong> is highly preferred.</p></li><li><p>Ability to read drawings and take accurate site measurements.</p></li><li><p>Good knowledge of carpentry tools, machinery, materials and furniture hardware.</p></li><li><p>Ability to work independently and solve installation problems on site.</p></li><li><p>Attention to detail and high-quality finishing.</p></li><li><p>Candidates currently available in the <strong>UAE</strong> are preferred.</p></li></ul><p><strong>Company:</strong> Black Diamond Decoration Paint Works</p><br>

<strong>Job Description<br><br></strong><strong>About Wynn Al Marjan Island:<br><br></strong>On schedule to open in the United Arab Emirates in 2027, Wynn Al Marjan Island has been created as an opulent and entertaining beachside destination for discerning guests to play and relax. Located less than 50 minutes from Dubai International Airport, this integrated resort offering 1,530 rooms and suites, 22 restaurants and lounges, a theatre, nightclub, and five-star spa is currently under construction on a picturesque island that gracefully curves into the Arabian Gulf.<br><br><strong>About The Position<br><br></strong>Wynn Al Marjan Island is looking for a <strong>Machine Learning Operations Engineer </strong> to join our <strong>Database Marketing </strong>team.<br><br><strong>Responsibilities<br><br></strong>The primary duties and responsibilities of this role are:<br><br><ul><li> Deploy, monitor, and maintain machine learning models used across gaming marketing and player analytics. </li><li> Operationalize Data Science outputs by building automated pipelines for scoring, segmentation, and campaign ready datasets. </li><li> Ensure high reliability and uptime for model workflows, including job scheduling, error detection, and alerting. </li><li> Collaborate with Data Scientists to productionize new models, optimize runtime performance, and improve stability. </li><li> Build and maintain data pipelines supporting model features, input refreshes, and scheduled scoring processes. </li><li> Implement QA processes to identify data drift, model degradation, and operational anomalies. </li><li> Maintain version control and documentation for models, pipelines, and deployment procedures. </li><li> Partner with Campaign Operations to ensure model outputs align with business logic, targeting requirements, and production schedules. </li><li> Work with IT and infrastructure teams on compute resources, storage, and system performance. </li><li> Support model retraining cycles, testing, and controlled rollouts of updated logic. </li><li> Ensure compliance with internal data governance and security standards. <br><br></li></ul><strong>About You<br><br></strong><ul><li> Master’s or PhD in Computer Science, Engineering, Data Science, Statistics or a related technical field required. </li><li> 5+ years of experience in Data Science, ML Ops, data engineering, or production‑level machine learning environments. </li><li> Strong experience with Python, SQL, and workflow orchestration tools (Airflow or similar). </li><li> Experience working with cloud-based data platforms. </li><li> Familiarity with machine learning model lifecycle management, CI/CD pipelines, and version control (Git). </li><li> Able to translate analytical requirements into stable, production‑ready workflows. </li><li> Comfortable working in fast‑paced environments with daily and weekly operational deliverables. <br><br></li></ul><strong>About Wynn Al Marjan Island’s Benefits<br><br></strong>We offer an attractive salary, paid in Dirhams (AED), the local currency of the UAE. In addition, we offer an excellent leave policy, a healthcare package, incentive programs, and other employee benefits . The result is a package that makes this role highly attractive to outstanding applicant s seeking a career with Wynn Resorts, among the most renowned and celebrated brands in the global hospitality industry.

<p><strong>Black Diamond Decoration Paint Works</strong> is looking for an experienced <strong>Furniture Painter / Wood Finishing Painter</strong> to join our team in the UAE.</p><p>Responsibilities</p><ul><li><p>Perform professional painting and finishing for <strong>furniture, MDF, plywood and wooden products</strong>.</p></li><li><p>Prepare wooden surfaces through sanding, filling, putty application and priming.</p></li><li><p>Apply <strong>PU paint, lacquer, stain, clear coat and other furniture finishes</strong>.</p></li><li><p>Perform spray painting using professional spray guns and equipment.</p></li><li><p>Mix paints and match colors according to approved samples.</p></li><li><p>Achieve smooth, high-quality finishes for custom-made furniture, cabinets, wardrobes, counters, wall panels and decorative woodwork.</p></li><li><p>Repair and touch up damaged or imperfect painted surfaces.</p></li><li><p>Maintain painting tools, spray equipment and work areas properly.</p></li><li><p>Coordinate with carpenters and supervisors to meet project specifications and deadlines.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p>Requirements</p><ul><li><p>Minimum <strong>2 years of experience in furniture and wood painting</strong>.</p></li><li><p>Strong experience in <strong>MDF and furniture finishing</strong>.</p></li><li><p>Good knowledge of <strong>PU paint, spray painting, lacquer, primer and wood finishing techniques</strong>.</p></li><li><p>Ability to prepare surfaces and achieve high-quality smooth finishes.</p></li><li><p>Good knowledge of paint mixing and color matching.</p></li><li><p>Experience in <strong>joinery, furniture workshops or interior fit-out projects</strong> is preferred.</p></li><li><p>Attention to detail and commitment to quality.</p></li><li><p>Candidates currently available in the <strong>UAE</strong> are preferred.</p></li></ul><p><strong>Company:</strong> Black Diamond Decoration Paint Works</p><br>

<p>Roles & Responsibilities</p><p>We are looking for a creative and technically skilled <strong>3D Designer</strong> to join our team full-time in <strong>Ras Al Khaimah, UAE</strong>.</p><p>The designer will work across <strong>Exhibition Stands & Booths, Commercial Interiors, Custom Spaces, and Gaming Room / Gaming Setup projects</strong>.</p><p>Key responsibilities:</p><ul><li><p>Create creative and professional <strong>3D concepts and photorealistic visualizations</strong>.</p></li><li><p>Design <strong>exhibition stands and booths</strong> based on client briefs, branding, space requirements and budgets.</p></li><li><p>Develop interior concepts for <strong>commercial spaces and custom-built projects</strong>.</p></li><li><p>Design <strong>Gaming Rooms & Gaming Setups</strong>, including gaming desks, wall features, ceilings, RGB/LED lighting, display units and decorative elements.</p></li><li><p>Convert client references, mood boards and briefs into original and executable 3D concepts.</p></li><li><p>Prepare <strong>layouts, elevations, technical drawings and shop drawings</strong> for production.</p></li><li><p>Select appropriate materials, finishes, lighting and construction details.</p></li><li><p>Ensure designs are <strong>creative, practical, buildable and cost-conscious</strong>.</p></li><li><p>Coordinate with production and site teams to ensure accurate execution.</p></li><li><p>Revise designs according to client feedback and production requirements.</p></li><li><p>Handle multiple projects and meet deadlines.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>1–3 years of relevant 3D design experience.</strong></p></li><li><p>Strong portfolio demonstrating professional <strong>3D modeling, visualization and rendering</strong>.</p></li><li><p>Previous experience in <strong>Exhibition Stand / Booth Design is highly preferred</strong>.</p></li><li><p>Strong skills in <strong>3ds Max</strong> or equivalent professional 3D software.</p></li><li><p>Good knowledge of <strong>AutoCAD and Photoshop</strong>.</p></li><li><p>Strong rendering skills using <strong>V-Ray, Corona Renderer or equivalent</strong>.</p></li><li><p>Ability to prepare <strong>technical/shop drawings for production</strong>.</p></li><li><p>Good understanding of materials and fabrication, including <strong>MDF, acrylic, metal, glass, signage, LED/RGB lighting and decorative finishes</strong>.</p></li><li><p>Experience in interior, retail or commercial space design is an advantage.</p></li><li><p>Must have the creativity and technical ability to design professional <strong>Gaming Rooms & Gaming Setups</strong>.</p></li><li><p><strong>Previous Gaming Room / Gaming Setup experience is a BONUS and is NOT required.</strong></p></li><li><p>UAE experience is an advantage but <strong>not mandatory</strong>.</p></li><li><p>Must be willing to work <strong>full-time, on-site in Ras Al Khaimah, UAE</strong>.</p></li><li><p><strong>All nationalities are welcome to apply.</strong></p></li></ul><p>PORTFOLIO IS MANDATORY</p><p>Candidates must submit a <strong>3D Design Portfolio</strong> with their application.</p><p>Priority will be given to portfolios showing <strong>Exhibition Stands / Booths, Commercial Interiors, Executed Projects, Custom Spaces or high-quality 3D visualizations</strong>.</p><p>Gaming Room / Gaming Setup projects in the portfolio will be considered an <strong>additional advantage, not a requirement</strong>.</p><p><strong>Salary: AED 3,500–5,000 per month, depending on experience, technical skills and portfolio quality.</strong></p>

<p><strong>Black Diamond Decoration Paint Works is looking for an experienced Electrician / LED & Lighting Installation Technician to join our team in the UAE.</strong></p><p><strong>Responsibilities:</strong></p><ul><li><p>Installation of LED strips, LED profiles and decorative lighting.</p></li><li><p>Installation of spotlights, downlights, pendant lights and other indoor/outdoor lighting.</p></li><li><p>Electrical wiring and connections for fit-out and decoration projects.</p></li><li><p>Installation of switches, sockets, drivers, transformers and power supplies.</p></li><li><p>Troubleshooting and maintenance of electrical and lighting systems.</p></li><li><p>Reading electrical layouts and executing work according to site requirements.</p></li><li><p>Ensuring safe, clean and high-quality installation.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements:</strong></p><ul><li><p>Minimum 3 years of practical experience.</p></li><li><p>Strong experience in LED and decorative lighting installation.</p></li><li><p>Good knowledge of electrical wiring and connections.</p></li><li><p>Experience in interior fit-out and decoration projects is preferred.</p></li><li><p>Able to work independently and solve site problems.</p></li><li><p>Currently available in the UAE is preferred.</p></li></ul><p><strong>Company:</strong> Black Diamond Decoration Paint Works</p><br>

<br><ul><li><p>Carry out interior and exterior painting works for residential and commercial projects.</p></li><li><p>Prepare surfaces by cleaning, scraping, filling, puttying, sanding, and applying primer.</p></li><li><p>Apply emulsion, enamel, texture, and decorative paints as required.</p></li><li><p>Perform smooth and high-quality finishing, touch-ups, and snagging works.</p></li><li><p>Mix and match paint colors according to approved samples.</p></li><li><p>Protect floors, furniture, joinery, and other finished surfaces during painting.</p></li><li><p>Use brushes, rollers, spray equipment, and other painting tools properly.</p></li><li><p>Follow project drawings, approved colors, samples, and site instructions.</p></li><li><p>Coordinate with the Site Engineer/Foreman to complete work according to project schedules.</p></li><li><p>Maintain clean and organized work areas and follow site safety requirements.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum <strong>0-2 years of experience</strong> as a Painter.</p></li><li><p>Experience in <strong>interior fit-out, finishing, or construction</strong> is preferred.</p></li><li><p>Good knowledge of putty, sanding, primer, emulsion, enamel, and decorative finishes.</p></li><li><p>Experience in wood polishing, spray painting, or joinery finishing is an advantage.</p></li><li><p>Ability to achieve clean, smooth, and professional finishes.</p></li><li><p>UAE experience is preferred.</p></li><li><p>Ability to work independently and as part of a team.</p></li><li><p>Physically fit and able to work at project sites.</p></li><li><p><strong>Immediate joining is preferred.</strong></p></li></ul>

<ul><li>Lead and motivate a sales team to achieve and exceed carpentry product sales targets, fostering a high-performance culture.</li><li>Develop and implement effective sales strategies specifically for carpentry materials and services, identifying new market opportunities.</li><li>Conduct regular product training sessions for the sales team, ensuring deep knowledge of carpentry techniques, materials, and applications.</li><li>Manage customer relationships, providing expert advice on carpentry projects and solutions to ensure customer satisfaction and loyalty.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Experience:</strong>&nbsp;5+ years of proven experience in interior joinery and carpentry work.</p></li><li><p><strong>Technical Knowledge:</strong>&nbsp;Strong understanding of interior fit-out, joinery works, and the ability to read and manage design drawings effectively.</p></li><li><p><strong>Sales & Estimations:</strong>&nbsp;Capable of visiting clients independently, understanding their requirements, and preparing accurate project quotations.</p></li><li><p><strong>Skills:</strong>&nbsp;Excellent team supervision, project management, and communication skills.</p></li><li><p><strong>Languages:</strong>&nbsp;English and Hindi are required (Arabic an advantage).</p></li><li><p><strong>Nationality:</strong>&nbsp;Indian nationals preferred.</p></li><li><p><strong>License:</strong>&nbsp;A valid UAE driving license is a strong advantage.</p></li></ul><p><strong>How to Apply:</strong></p><p>If you meet the requirements, send your updated CV directly via call or WhatsApp to the following numbers:</p><ul><li><p><strong>WhatsApp / Call:</strong>&nbsp;+971 52 1562390</p></li><li><p><strong>WhatsApp / Call:</strong>&nbsp;+971 50 595 5067</p></li></ul>

<p><strong>Job Title: </strong>Mechanical Engineer – Commercial Kitchen Ventilation</p><p><strong>Location: </strong>Ras Al Khaimah</p><p><strong>Salary: </strong>Up to AED 4,000</p><p><strong>Job Code:</strong> 200/001/555</p><p><strong>Industry: </strong>Commercial&nbsp;Kitchen Equipment /&nbsp;HVAC / Ventilation</p><p><br></p><p><strong>Job Brief:</strong></p><p><span>We are seeking a </span><strong>Mechanical Engineer</strong><span> with experience in </span><strong>commercial kitchen ventilation systems, particularly kitchen ventilation hoods</strong><span>.</span></p><p><br></p><p><span>The role focuses on the technical development of new and existing commercial kitchen ventilation hood products, including prototyping, testing, supplier qualification, and commissioning of </span><strong>Demand-Controlled Kitchen Ventilation (DCKV) systems</strong><span>.</span></p><p><br></p><p><span>The Mechanical Engineer will work closely with the R&amp;D Manager, 3D Designer, and cross-functional teams, including Production, Quality, and Projects, to develop reliable, high-quality commercial kitchen ventilation products.</span></p><p><br></p><p><strong>Product / System Exposure:</strong></p><ul><li>Commercial kitchen ventilation hoods</li><li>Kitchen extraction and ventilation systems</li><li>Demand-Controlled Kitchen Ventilation (DCKV) systems</li><li>Airflow and extraction systems</li><li>Ventilation controls and sensors</li></ul><p><br></p><p><strong>Job Responsibilities:</strong></p><ul><li>Develop and improve commercial kitchen ventilation hoods, working with the 3D Designer to translate requirements into manufacturable products.</li><li>Write test plans and protocols for hood performance, including airflow, capture/containment, grease extraction, noise, and other relevant parameters.</li><li>Carry out physical tests in the laboratory and on-site, record and analyse results, and report findings.</li><li>Identify root causes of test failures and drive corrective design actions.</li><li>Identify, evaluate, and vet suppliers for components and materials, including inspection, sample testing, and documentation review.</li><li>Commission demand-controlled ventilation systems on-site, including sensor setup, calibration, and control logic verification.</li><li>Troubleshoot demand-controlled ventilation performance issues in the field.</li><li>Review supplier documentation, including datasheets, manuals, test reports, and certifications.</li><li>Plan and execute structured testing activities efficiently.</li><li>Travel occasionally for site commissioning across region.</li><li>Work flexible hours, including weekends and evenings, when required by project deadlines.</li></ul><p><br></p><p><strong>Job Requirements:</strong></p><ul><li>Bachelor of Science (BSc) in <strong>Mechanical Engineering</strong> or a closely related field.</li><li><strong>3–5 years of relevant experience</strong> in product development, ideally involving HVAC, ventilation, or commercial kitchen equipment.</li><li><strong>Mandatory experience with commercial kitchen ventilation systems, particularly kitchen ventilation hoods.</strong></li><li>Strong understanding of airflow, extraction, and demand-controlled ventilation principles.</li><li>Experience in writing and executing structured test plans.</li><li>Comfortable reviewing supplier documentation, including datasheets, manuals, test reports, and certifications.</li><li>Working knowledge of <strong>DW 172, EN 16282, and ASHRAE Standard 154</strong>.</li><li>Self-motivated and proactive in planning tests, making decisions, and organising work efficiently.</li><li>Familiarity with <strong>3D CAD (Autodesk Inventor)</strong> would be an advantage.</li><li>Willingness to travel occasionally for site commissioning across the region.</li><li>Willingness to work flexible hours, including weekends and evenings, as required by project deadlines.</li><li>Hands-on, structured, and detail-oriented approach to problem-solving.</li></ul><p><br></p>

<p>Final Vehicle Cleaning · Perform thorough interior and exterior cleaning of armored vehicles after production completion. · Remove dust, debris, grease, fingerprints, and residues from armoring, mechanical, and interior areas. · Clean ballistic glass, trims, panels, seats, dashboards, and vehicle compartments carefully to avoid damage. Quality Support · Ensure vehicle appearance meets QC and customer presentation standards prior to delivery. · Identify and report any visible defects, damages, stains, or missing items to the QC Inspector or Supervisor. · Support final inspection activities by ensuring vehicles are in inspection-ready condition. · Support to maintenance and QC team during vehicle shipment Material & Equipment Handling · Use approved cleaning materials, chemicals, and tools in accordance with company procedures. · Handle armored components, glass, and vehicle surfaces with care to prevent scratches or damage. · Ensure cleaning equipment is maintained, stored safely, and used correctly. Documentation & Coordination · Assist in confirming completion of cleaning tasks as required by QC procedures. · Coordinate with QC Inspectors, Production, and Delivery teams to meet handover schedules.</p><p>Education: · Intermediate / High School Diploma (Secondary Level) or equivalent Training: · Vehicle Cleaning and Detailing Training is an advantage Experience: · Minimum of 0-1 year of experienced in vehicle cleaning, detailing in automotive manufacturing, ensuring high-quality interior and exterior finish before delivery. · Skilled in cleaning of vehicle interiors, and engine compartments while maintaining safety and quality standards.</p>

<p><strong>Factory Operations Manager – Joinery Manufacturing</strong></p><p><strong>Ras Al Khaimah, UAE</strong></p><p>We are currently supporting a leading interior fit-out business in the UAE with the appointment of an experienced <strong>Factory Operations Manager</strong> to lead their joinery manufacturing operations.</p><p>Reporting directly to the Managing Director, this is a senior operational leadership role with responsibility for end-to-end factory performance, including production, cost efficiency, quality, workforce management and continuous improvement.</p><p><br></p><p>Key Responsibilities</p><p>• Lead the overall operations of the joinery manufacturing facility, ensuring efficient and high-quality production aligned with project delivery requirements.</p><p>• Develop and implement operational strategies, resource plans and optimised manufacturing workflows to maximise productivity and minimise waste.</p><p>• Drive continuous improvement across production processes, quality standards and factory performance.</p><p>• Manage factory budgets, cost control and productivity performance to support commercial targets and project profitability.</p><p>• Maintain a strong health and safety culture and proactively manage operational risks across the facility.</p><p>• Lead, develop and motivate a high-performing factory workforce, with a focus on capability development, succession planning and employee engagement.</p><p>• Work closely with project, commercial and technical teams to ensure factory output is aligned with project programmes and delivery expectations.</p><p>• Support tendering and business development activities through factory capability presentations, technical input and client engagement.</p><p>• Identify opportunities to enhance factory capacity, introduce new technologies and improve production systems.</p><p>Candidate Requirements</p><p>• Minimum <strong>10+ years' experience</strong> within manufacturing or factory operations.</p><p>• Strong experience within <strong>joinery manufacturing, interior fit-out or a closely related manufacturing environment</strong>.</p><p>• Proven experience managing complex, high-volume and fast-paced factory operations.</p><p>• Strong knowledge of production planning, manufacturing workflows, resource allocation and operational performance management.</p><p>• Commercially astute, with experience managing budgets, productivity, cost control and profitability.</p><p>• Demonstrated success implementing process improvements and increasing production efficiency.</p><p>• Strong leadership experience managing multidisciplinary factory teams.</p><p>• Excellent stakeholder management and communication skills across operational, commercial and senior leadership teams.</p><p>Desirable Experience</p><p>• Lean manufacturing and DFMA principles.</p><p>• Digital production planning or factory tracking systems.</p><p>• FSC, ISO or other manufacturing sustainability standards.</p><p>• Value engineering and factory improvement programmes.</p><p>• Factory expansion, upgrades or multi-site operational leadership.</p><p><br></p><p>This is an excellent opportunity for an experienced manufacturing leader to take ownership of a major joinery operation and play a key role in supporting the delivery of complex interior fit-out projects across the region.</p>

<p>We are looking for an Interior and Exterior Site Driver who can provide safe, efficient, and timely driving support for all site-related activities. The candidate must ensure proper handling of company vehicles and assist in smooth operational tasks as required.</p><p><strong>Key Tasks:</strong></p><ul><li><p>Safely drive company and customer vehicles to designated locations (showrooms, workshops, registration offices, delivery sites, etc.).</p></li><li><p>Transport staff, materials, and equipment between facilities and project locations.</p></li><li><p>Report any vehicle issues, accidents, or delays promptly to the supervisor.</p></li><li><p>Ensure vehicles are always clean, fueled, and maintained in good condition.</p></li><li><p>Must provide safe, efficient, and timely driving support for all interior and exterior site activities.</p></li><li><p>Ensure proper handling and maintenance of company vehicles.</p></li><li><p>Assist with site-related operational tasks as needed.</p></li><li><p>Maintain professionalism and follow company safety guidelines at all times.</p></li></ul><p><strong>Requirements:</strong></p><ul><li><p><strong>Valid UAE Driving License</strong></p></li><li><p>Fluent in <strong>English</strong>; knowledge of <strong>Arabic</strong> or other languages is a plus.</p></li><li><p>Ability to work flexible hours, including weekends and public holidays.</p></li><li><p>having your own visa is considered a plus.</p></li></ul><p><strong>Preferred Qualifications:</strong></p><ul><li><p>Experience driving for 1 to 2 years.</p></li><li><p>Ability to communicate in English (Arabic or Hindi/Urdu is an advantage).</p></li><li><p>Physically fit and with a clean driving record.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Safe and defensive driving</p></li><li><p>Excellent knowledge of UAE roads and traffic regulations</p></li><li><p>Ability to drive light vehicles and company vehicles</p></li><li><p>Vehicle inspection and basic maintenance</p></li><li><p>Parking and reversing skills</p></li><li><p>Time management and punctuality</p></li><li><p>Safe transportation of employees, materials, and equipment</p></li><li><p>Awareness of road safety and accident prevention</p></li><li><p>Ability to follow delivery schedules and assigned routes</p></li></ol>

<p>The Marine Chief Designer is responsible for leading the complete design and engineering activities for marine vessels from concept development through detailed engineering, production support, sea trials, and final project delivery. The position requires strong technical expertise, leadership, ownership, and the ability to work effectively under demanding production schedules. The Chief Designer shall ensure that vessel designs are technically sound, production-ready, compliant with client requirements, and aligned with applicable Classification Society, Flag State, statutory, and marine industry requirements.</p><br><p><strong><u>Key Responsibilities</u></strong></p><p>Lead and manage the Marine Design & Engineering team covering naval architecture, structural, mechanical, piping, electrical, outfitting, and production drawings. </p><p>• Take full technical ownership of vessel design from concept, basic design and detailed design through construction and commissioning.</p><p> • Review client specifications, tenders and contractual technical requirements and convert them into practical vessel designs.</p><p> • Develop and review General Arrangement drawings, hull forms, structural arrangements, machinery layouts, equipment arrangements and system schematics. </p><p>• Coordinate naval architecture calculations including: </p><p> Hydrostatics / Stability and trim / Weight estimation and weight control / VCG/LCG assessment </p><p>*Ensure vessel designs meet required speed, payload, range, endurance, draft, stability and operational performance.</p><p>• Review structural design and scantlings for aluminum, steel, FRP and HDPE craft as applicable. </p><p>• Review propulsion integration including outboard engines, inboard engines, waterjets, shaft drives and associated machinery.</p><p>Ensure proper integration of electrical, navigation, communication, HVAC, fuel, freshwater, bilge, sewage, firefighting and other marine systems.</p><p> • Review equipment foundations, loads, structural reinforcements and interfaces for mission equipment and special systems.</p><p> • Lead technical evaluation and selection of engines, waterjets, generators, pumps, HVAC equipment and other major marine equipment. </p><p>• Prepare and approve production drawings, fabrication drawings, installation drawings, nesting information and technical specifications.</p><p> • Ensure drawings released to Production are complete, coordinated and suitable for fabrication and installation. </p><p>• Provide immediate engineering support to Production, QC, Procurement and Commissioning teams when technical issues arise.</p><p> • Resolve design conflicts, site modifications, NCRs, technical queries and production constraints without unnecessary project delay.</p><p> • Lead Design Change Requests and ensure all approved changes are reflected in drawings, BOMs and technical documentation.</p><p> • Coordinate with Classification Societies, marine consultants, Flag Authorities, clients and third party inspectors. </p><p>Prepare and submit drawings, calculations and technical documentation required for class review and approval. </p><p>• Review Classification Society comments and ensure timely technical closure. </p><p>• Participate in design reviews, client meetings, technical negotiations and project progress meetings.</p><p> • Support vessel inspections, commissioning, harbor trials and sea trials.</p><p> • Evaluate vessel performance following sea trials and recommend engineering modifications where necessary. </p><p>• Maintain accurate vessel weight reports and monitor changes that may affect stability, speed or payload. </p><p>• Review Bills of Materials and ensure alignment between approved drawings, specifications and procurement requirements. </p><p>• Coordinate closely with Procurement to identify long-lead technical equipment and finalize specifications early.</p><p> • Establish design priorities according to the production schedule and project delivery commitments. </p><p>• Allocate engineering manpower and monitor individual designer performance.</p><p> • Mentor engineers and designers and develop the technical capability of the department. </p><p>• Maintain drawing control, revision control and engineering documentation standards. • Identify technical and schedule risks early and escalate critical issues to management. </p><p>• Provide clear engineering decisions and maintain accountability for technical deliverables.</p><p><strong>Desired Candidate Profile</strong></p><p>*Familiarity with applicable marine standards and Classification Societies such as DNV, Lloyd's Register, Bureau Veritas, RINA, Türk Loydu, PRS, ABS or equivalent is desirable. </p><p>*Experience with 3D vessel modelling, production drawings, nesting and CNC-related design preparation is an advantage.</p><p> Bachelor's Degree in Naval Architecture, Marine Engineering, Mechanical Engineering, Shipbuilding Engineering or a closely related discipline.</p><p>• Master's Degree or relevant professional certification is an advantage.</p><p>• Preferably 10+ years of marine vessel design and engineering experience. </p><p>Required Technical Knowledge Strong knowledge of: </p><p>• Naval architecture</p><p> • Minimum 3–5 years in a senior, lead or chief designer role involving management of an engineering/design team.</p><p> • Strong experience in small craft, patrol craft, military craft, workboats, landing craft, fast boats or similar vessels is highly desirable. </p><p>• Practical boatbuilding or shipyard production experience is strongly preferred.</p>

<p><strong>Job Title: </strong>Graphic Designer</p><p><strong>Location:</strong> Ras Al Khaimah</p><p><strong>Salary: </strong>AED 4,000 – 4,200</p><p><strong>Job Code: </strong>001/001/582</p><p><strong>Industry: </strong>FMCG / Manufacturing</p><p><br></p><p><strong>Job Brief:</strong></p><p>We are seeking an experienced Graphic Designer to support packaging artwork, graphic design, artwork development, and related operational requirements within an FMCG/manufacturing environment.</p><p><br></p><p>The Graphic Designer will work directly under the Graphics Supervisor in performing all packaging and artwork requirements while maintaining the standards of the product and company. The role creates visual concepts, by hand or using computer software, to communicate ideas that inspire, inform, or captivate consumers. The key role is to develop the overall layout of packaging designs and other collateral materials.</p><p><br></p><p><strong>Job Responsibilities:</strong></p><p><strong>Artwork Updates – Layouts and Languages</strong></p><ul><li>Ability to work with multiple languages, typographical elements, and strict legal requirements.</li><li><strong>Work with carton artwork to ensure consistency is maintained across all product ranges to reflect the premium brand.</strong></li><li>Have a keen eye for detail, with the ability to proofread and highlight issues, along with a strong visual sense and confidence to present and explain ideas.</li><li>Ability to multi-task and work under pressure.</li><li>Take ownership of jobs to ensure they meet all requirements and deadlines.</li><li>Keep thorough records to ensure all jobs are completed.</li><li>Maintain good record-keeping ability and organizational skills.</li></ul><p><br></p><p><strong>Design and Development</strong></p><ul><li><strong>Ability to perform top-notch graphical layouts</strong> based on requests for a wide variety of subjects while maintaining brand guidelines.</li><li>Have a keen eye for the exact requirements and specifications of designs and be able to handle tasks through to the ultimate goal.</li><li>Follow up on the proofing and development of artwork with suppliers until final approval.</li><li>Oversee all aspects of a project, from concepts through to final artwork, either independently or as part of a team.</li></ul><p><br></p><p><strong>Operational Support</strong></p><ul><li>Help with in-house operational activities, such as production requirements, new product development, and sampling requirements.</li><li>Liaise across all departments within the organization for packaging design.</li><li>Understand management requirements and prepare presentations for management, maintaining top-notch professional standards with high-end graphics.</li><li><strong>Be responsible for generating ideas</strong>, <strong>creating visual concepts, and delivering all requirements within the mandated objectives and timelines.</strong></li></ul><p><br></p><p><strong>Job Requirements:</strong></p><ul><li><span class="ql-cursor"></span>Bachelor’s degree or Diploma in Computer Graphics.</li><li><strong>Minimum 4–5 years of experience in graphics and artwork development.</strong></li><li>Experience handling multiple languages and proofreading artwork.</li><li>Experience working with Mac systems.</li><li><strong>Proficiency in Adobe Photoshop Creative Cloud, Adobe Illustrator, Quark, or other visual design tools.</strong></li><li>Proficiency in Microsoft Office, including Word, Excel, and PowerPoint.</li><li>Experience working in a commercial printing and/or packaging environment.</li><li><strong>Experience within the FMCG/manufacturing industry, preferably within an MNC environment.</strong></li><li>Certificate or Diploma in Packaging.</li><li>Strong communication and interpersonal skills, with fluency in written and spoken English.</li><li>High level of personal motivation and ability to work on own initiative.</li><li>Understanding of differences and diversity, with respect for individuals and the ability to maintain necessary confidentiality.</li><li>Understanding of the need to promote a people-oriented company culture.</li><li>Highly organized and action-oriented, with the ability to focus on key objectives and work within specific timeframes.</li></ul><p><br></p>

<p>We are looking for an <strong>Experienced Facade Designer</strong> to join our growing team in Ras Al Khaimah. Candidates must be currently available in the UAE and possess strong experience in façade design, detailing, and project coordination.</p><br><ul><li><p>Prepare façade shop drawings, fabrication drawings, and construction details.</p></li><li><p>Develop technical drawings and design solutions for aluminium, glass, and façade systems.</p></li><li><p>Coordinate with project managers, engineers, consultants, and site teams.</p></li><li><p>Review project specifications, architectural drawings, and tender documents.</p></li><li><p>Ensure drawings comply with project requirements, industry standards, and client specifications.</p></li><li><p>Support material estimation, design optimization, and value engineering activities.</p></li><li><p>Assist in resolving technical and design-related issues during project execution.</p></li><li><p>Maintain drawing revisions and project documentation.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>✔ Minimum 3+ years of experience in façade design ✔ Strong knowledge of aluminium, glazing, curtain wall, and façade systems ✔ Proficiency in AutoCAD (mandatory) ✔ Experience with façade detailing and shop drawings ✔ Ability to read and interpret architectural and structural drawings ✔ Strong coordination and communication skills ✔ Must be currently available in the UAE ✔ Immediate joiners preferred</p>

<strong>Responsibilities<br><br></strong>Here's what you'll do during a typical day:<br><br><strong>Essential Functions<br><br></strong><ul><li>Perform carpentry tasks including construction, installation, repair, and maintenance of furniture, fixtures, and structures such as doors, windows, and partitions. </li><li>Inspect and assess the need for repairs on various woodworks and structures, and execute timely maintenance or replacement. </li><li>Work closely with the Engineering team to prioritize carpentry tasks and ensure the smooth operation of the hotel’s facilities.</li><li>Maintain an inventory of supplies, tools, and materials needed for carpentry work. Order new supplies as necessary while adhering to the budget. </li><li>Keep accurate records of maintenance work performed and materials used.</li><li>Read and interpret blueprints, drawings, and sketches to understand project specifications and requirements. </li><li>Measure, cut, shape, assemble, and join materials made of wood and wood substitutes. </li><li>Implement custom design solutions to enhance the functionality and appearance of the hotel’s interior and exterior spaces. </li><li>Ensure all carpentry work complies with safety standards and building codes. </li><li>Stay current with the latest carpentry techniques and materials to improve efficiency and outcomes.</li><li>Discuss your knowledge of different wood types, their properties, and suitability for specific projects, as well as familiarity with other materials like adhesives, finishes, and hardware.<br><br></li></ul><strong>SUPPORTIVE FUNCTION<br><br></strong>In addition to performance of the essential functions, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the supervisor based upon the particular requirements of the company.<br><br><strong>Qualifications<br><br></strong><strong>What It Takes to Make the Stay<br><br></strong>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br><ul><li>Proven experience and expertise in carpentry, including a thorough understanding of carpentry techniques and methods of installation and construction. </li><li>Proficient in using electrical and manual equipment and measurement tools (powered saws, hammers, rulers, etc.). </li><li>Strong attention to detail and the ability to work with precision. </li><li>Excellent problem-solving skills and the ability to work independently or as part of a team.<br><br></li></ul><strong>About Us<br><br></strong><strong>Join an Award-Winning Workplace Culture<br><br></strong>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

<strong><strong>JOB DESCRIPTION <br><br></strong></strong><strong>About Wynn Al Marjan Island:<br><br></strong>Wynn Al Marjan Island will be the first integrated resort in the UAE. Set to open in 2027, the resort will be located 50 miles from Dubai International Airport in the emirate of Ras Al Khaimah. The resort will offer 1,530 rooms and suites, 22 restaurants, lounges, and bars, a theater, and a beach club. It will feature multiple swimming and wading pools, water features, a five-star spa, a salon, a shopping promenade, and a celebrations and events center.<br><br><strong><strong>About The Position:<br><br></strong></strong>Wynn Al Marjan Island is looking for a skilled <strong>Creative Content Designer</strong> to join our <strong>Employee Culture and Internal Communications </strong>team.<br><br><strong><strong>About The Position: <br><br></strong></strong>The primary duties and responsibilities of this role are:<br><br><ul><li></li><ul><li> Translate information, ideas, and key messages into compelling visual experiences, including handbooks, presentations, posters, signage, and digital and print materials. </li></ul><li></li><ul><li> Conceptualize, design, and produce creative assets for colleague campaigns, initiatives, and events, transforming ideas into polished, high-impact content from brief to final delivery. </li></ul><li></li><ul><li> Create engaging content for internal screens, and colleague-facing communication channels that inform, inspire, and strengthen connection. </li></ul><li></li><ul><li> Capture, edit, and produce photography and video that showcases our people, culture, milestones, and everyday moments with authenticity and artistry. </li></ul><li></li><ul><li> Champion and protect the Wynn brand, ensuring every creative asset reflects our visual identity, uncompromising standards, and commitment to excellence. </li></ul><li></li><ul><li> Strengthen our employer brand through storytelling that showcases what it means to work at Wynn Al Marjan Island and inspires the very best talent to join our team. </li></ul><li></li><ul><li> Build and maintain a thoughtfully curated library of design, photography, video, and brand assets that supports consistency and creative excellence across the business. </li></ul><li></li><ul><li> Partner with teams across People &amp; Culture, Marketing, and other departments to understand objectives, shape creative concepts, and deliver content that is engaging, impactful, and on brand. </li></ul><li></li><ul><li> Collaborate with external agencies, production partners, and suppliers to ensure exceptional quality and flawless execution across all creative deliverables. <br></li></ul></ul><strong><strong>About You:<br><br></strong></strong><ul><li> Bachelor’s degree in Graphic Design , Visual Communications, or a related field. </li><li> Minimum 3 years of experience in graphic design, preferably within hospitality, lifestyle, luxury, or service-led brands. </li><li> Strong portfolio showcasing creative work across print, digital, photography, and multimedia content. </li><li> Advanced proficiency in Adobe Creative Suite, including Photoshop, Illustrator, and InDesign. </li><li> Proficiency in photography and videography, including planning, shooting, editing, and producing content for digital, social media, and internal communication channels. </li><li> Proficiency in video editing software such as Adobe Premiere Pro and familiarity with motion graphics tools such as Adobe After Effects preferred. </li><li> Strong visual storytelling skills, with the ability to translate ideas and messages into engaging and impactful content. </li><li> Exceptional attention to detail and the ability to manage multiple projects and deadlines in a fast-paced environment. </li><li> Fluency in written and spoken English; Arabic is an advantage. </li><li> About Wynn Al Marjan Island’s Benefits:<br><br></li></ul>We offer an attractive salary, paid in Dirhams (AED), the local currency of the UAE. In addition, we offer an excellent leave policy, a healthcare package, incentive programs, and other colleague benefits . The result is a package that makes this role highly attractive to outstanding applicant s seeking a career with Wynn Resorts, among the most renowned and celebrated brands in the global hospitality industry.

<ul><li><p>Safely operate large capacity dump trucks to transport earth, rock, and other bulk materials across construction sites and quarries.</p></li><li><p>Perform pre-operation checks to ensure the dumper is in safe working order, including brakes, tires, lights, and fluid levels.</p></li><li><p>Load and unload materials accurately and efficiently, coordinating with site supervisors and loaders to prevent over/underfilling.</p></li><li><p>Navigate challenging terrain, inclines, and confined spaces while maintaining vehicle stability and control.</p></li><li><p>Adhere strictly to site safety protocols, traffic management plans, and environmental regulations to prevent accidents and damage.</p></li><li><p>Monitor vehicle performance and report any mechanical issues or required maintenance promptly to the supervisor.</p></li><li><p>Maintain accurate daily logs of operational hours, material transported, and any incidents or delays.</p></li><li><p>Operate dumper machinery in conjunction with other heavy equipment operators, ensuring smooth workflow and project progression.</p></li><li><p>Practice fuel-efficient driving techniques to minimize operational costs and environmental impact.</p></li><li><p>Clean and maintain the dumper's exterior and interior to ensure optimal performance and a professional appearance.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a valid Commercial Driver's License (CDL) appropriate for heavy vehicle operation.</li><li>Have a minimum of 2-3 years of proven experience operating dump trucks or similar heavy earthmoving equipment.</li><li>Demonstrate a strong understanding of heavy machinery mechanics and the ability to perform basic maintenance.</li><li>Hold relevant certifications such as OSHA or specific equipment operation certifications.</li><li>Be physically fit, with the ability to withstand long hours, vibration, and varying weather conditions.</li><li>Exhibit excellent hand-eye coordination and spatial awareness for precise maneuvering.</li><li>Possess a strong commitment to safety and a proactive approach to hazard identification.</li><li>Be able to communicate effectively with site supervisors, fellow operators, and maintenance personnel.</li><li>Experience working in demanding environments like mining, construction, or large-scale infrastructure projects.</li><li>Proficiency in English; knowledge of other languages relevant to the workforce may be advantageous.</li></ul>

<strong>Additional Information<br><br></strong><strong>Job Number</strong> 26138910<br><br><strong>Job Category</strong> Engineering &amp; Facilities<br><br><strong>Location</strong> P.O Box 4558, Vienna Street, Ras Al Khaimah, United Arab EmiratesVIEW ON MAP<br><br><strong>Schedule</strong> Full Time<br><br><strong>Located Remotely?</strong> N<br><br><strong>Position Type</strong> Non-Management<br><br><strong>Position Summary<br><br></strong>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br><br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br><br><strong>Preferred Qualifications<br><br></strong>Education: High school diploma or G.E.D equivalent.<br><br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br><br>Experience in hotel engineering or maintenance a plus.<br><br>Supervisory Experience: No supervisory experience.<br><br><strong>Required Qualifications<br><br></strong>License or Certification: Driver’s License<br><br><em>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br></em>At more than 100 award-winning properties worldwide, The Ritz-Carlton Ladies and Gentlemen create experiences so exceptional that long after a guest stays with us, the experience stays with them. Attracting the world’s top hospitality professionals who curate lifelong memories, we believe that everyone succeeds when they are empowered to be creative, thoughtful and compassionate.<br><br>Every day, we set the standard for rare and special luxury service the world over and pride ourselves on delivering excellence in the care and comfort of our guests.<br><br>Your role will be to ensure that the “Gold Standards” of The Ritz-Carlton are delivered graciously and thoughtfully every day. The Gold Standards are the foundation of The Ritz-Carlton and are what guides us each day to be better than the next. It is this foundation and our belief that our culture drives success by which The Ritz Carlton has earned the reputation as a global brand leader in luxury hospitality. As part of our team, you will learn and exemplify the Gold Standards, such as our Employee Promise, Credo and our Service Values. And our promise to you is that we offer the chance to be proud of the work you do and who you work with.<br><br>In joining The Ritz-Carlton, you join a portfolio of brands with Marriott International. <strong>Be</strong> where you can do your best work, <strong>begin</strong> your purpose, <strong>belong</strong> to an amazing global team, and <strong>become</strong> the best version of you.