وظائف فنيين - دبي الإمارات

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to Power and Desalination plant field instrumentation breakdowns and planned maintenance work with minimum direction and supervision. Technically assesses the requirement of the allocated jobs and selects the necessary tools and equipment to complete such work. Using the computerized maintenance system, orders the spare parts from the warehouse and maintains records of all maintenance work completed. Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements. Reports repeated breakdowns and assist in RCFA to identify an optimum solution to resolve the problem. Provides on the job training to new craftsmen in order to equip them with the necessary skills to be able to carry out maintenance repair work as planned</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications: Higher secondary or diploma Minimum Experience: Must be familiar with all maintenance tools and should have good knowledge of Plant Safety. The knowledge and experience required in the position is that gained previously experience working in a power or desalination plant and with exposure preferably to any of the maintenance and calibration of the following field instrumentation, Pressure, temperature, level, &amp; flow measuring devicesPneumatic &amp; Hydraulic valve actuation systemsCO2 Fire Protection systemsInfrared Gas Detection systemsWorking under time and technical pressure, and knowing that any mistake/error made will substantially cost the power station either on delay, equipment damage, or personnel injury.He can be assigned and work on shift duty. He can be called out any time to attend to breakdown work for the shift operation manager.He has to keep abreast with new technologies and control concepts. Working in very hot, dirty environment, and high level platforms.Skills:Must be able to read and understand engineering drawings and manuals.Must have knowledge / experience in the field of electrical, electronics, computer, hydraulic, and pneumatic devices</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities; repairs and/or replaces required items, re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures and troubleshoots electrical failures of plant and equipment with minimum or no direction.</p></li><li><p>Uses the computerized maintenance system (SAP) to order spare parts from the warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdowns and recommends proper modifications to resolve the problem.</p></li><li><p>Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them carry out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul></li><li><p><strong>Minimum Experience:</strong></p><ul><li><p>3 years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul></li><li><p><strong>Skills:</strong></p><ul><li><p>Good knowledge of written and spoken English</p></li><li><p>Familiarity with all maintenance tools and good IT knowledge</p></li><li><p>Experience in installation &amp; troubleshooting</p></li><li><p>Ability to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to Power and Desalination plant field instrumentation breakdowns and planned maintenance work with minimum direction and supervision.</p></li><li><p>Technically assesses the requirement of the allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Using the computerized maintenance system, orders the spare parts from the warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements. Reports repeated breakdowns and assist in RCFA to identify an optimum solution to resolve the problem.</p></li><li><p>Provides on the job training to new craftsmen in order to equip them with the necessary skills to be able to carry out maintenance repair work as planned</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><p>Higher secondary or diploma</p><p><strong>Minimum Experience:</strong></p><ul><li><p>Must be familiar with all maintenance tools and should have good knowledge of Plant Safety. The knowledge and experience required in the position is that gained previously experience working in a power or desalination plant and with exposure preferably to any of the maintenance and calibration of the following field instrumentation:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p></li></ul><ul><li><p>Pressure, temperature, level, &amp; flow measuring devices</p></li><li><p>Pneumatic &amp; Hydraulic valve actuation systems</p></li><li><p>CO2 Fire Protection systems</p></li><li><p>Infrared Gas Detection systems</p></li></ul><ul><li><p>Working under time and technical pressure, and knowing that any mistake/error made will substantially cost the power station either on delay, equipment damage, or personnel injury.</p></li><li><p>He can be assigned and work on shift duty. He can be called out any time to attend to breakdown work for the shift operation manager.</p></li><li><p>He has to keep abreast with new technologies and control concepts.&nbsp; Working in very hot, dirty environment, and high level platforms.</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Must be able to read and understand engineering drawings and manuals.</p></li><li><p>Must have knowledge / experience in the field of electrical, electronics, computer, hydraulic, and pneumatic devices</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Receive work assignments and job cards from the Supervisor and ensure a clear understanding of the required work before commencing.</p></li><li><p>Diagnose Vehicle A/C faults and carry out repairs within the allocated timeline while maintaining high-quality workmanship.</p></li><li><p>Identify and report any additional defects, repair requirements, or non-conformities to the Supervisor and ensure all findings are documented on the job card.</p></li><li><p>Notify the Supervisor of any spare parts, materials, or consumables required to complete the assigned work.</p></li><li><p>Refer to technical manuals, engineering drawings, repair procedures, and manufacturer documentation to ensure repairs and installations are performed correctly.</p></li><li><p>Ensure repaired vehicles &nbsp;systems are properly tested, and functioning before vehicle handover.</p></li><li><p>Maintain the cleanliness and presentation of the vehicle after completing all repair and installation activities.</p></li><li><p>Follow manufacturer specifications, company procedures, and approved installation standards at all times.</p></li><li><p>Comply with all Quality, Health, Safety, and Environmental Management System (QHSEMS) policies, procedures, and safety regulations.</p></li><li><p>Maintain a clean, safe, and organized work area and ensure all tools and equipment are cleaned and stored properly after use.</p></li><li><p>Maintain workshop tools and equipment in good working condition and promptly report any damaged or missing items.</p></li><li><p>Perform any other duties assigned by the Line Manager that are within the scope of the role and the employee's qualifications and competencies.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>High School Diploma or equivalent required; Vocational training in automotive technology preferred.</p></li><li><p>Proficiency in using automotive diagnostic software, scan tools, and manifold gauges.</p></li></ul><p></p></section>

<ul><li>Diagnose complex automotive issues using advanced diagnostic tools and techniques to ensure accurate repairs.</li><li>Perform routine maintenance tasks such as oil changes, tire rotations, and brake inspections to enhance vehicle longevity.</li><li>Utilize OEM service manuals and repair software to ensure compliance with safety standards and repair guidelines.</li><li>Replace faulty components, including engines, transmissions, and electrical systems, ensuring high-quality workmanship.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>A high school diploma or equivalent; an associate degree in automotive technology is preferred for advanced knowledge.</li><li>Certifications from recognized institutions, such as ASE, to validate expertise in specific automotive systems and repairs.</li><li>Minimum of 3 years of hands-on experience working in automotive repair shops or dealerships to ensure proficiency.</li><li>Familiarity with various vehicle brands and models, showcasing adaptability to diverse automotive technologies.</li></ul>

<ul><li>Diagnose and troubleshoot complex air conditioning systems to ensure optimal performance and efficiency.</li><li>Perform regular maintenance checks, including cleaning and replacing filters, to prevent breakdowns and extend equipment life.</li><li>Install new HVAC systems according to local codes and regulations, ensuring safety and reliability.</li><li>Calibrate thermostats and control systems for precise temperature regulation and energy efficiency.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>A high school diploma or equivalent is required; technical training in HVAC systems is preferred.</li><li>Certification from recognized organizations (e.g., EPA, NATE) demonstrates a commitment to industry standards.</li><li>2+ years of hands-on experience in residential and commercial AC systems is essential.</li><li>Familiarity with local building codes and safety regulations is a must for compliance.</li></ul>

<p>Maintenance Technician</p> <p>A reputable company is seeking a skilled Maintenance Technician to perform repair works, support facility maintenance activities, and ensure smooth daily operations. Freshers are welcome to apply.</p> <p>Responsibilities</p> <p>Perform basic maintenance and repair tasks<br /> Inspect equipment and report issues<br /> Assist with installation and troubleshooting activities<br /> Maintain tools and work areas properly<br /> Follow safety procedures during work activities</p> <p>Benefits</p> <p>Visa provided as per UAE Labor Law<br /> Medical insurance<br /> Career growth opportunities</p> <p>Location: Dubai, UAE<br /> Job Type: Full-Time</p> <p>Apply Now: +971 52 958 5969</p> <p>Only shortlisted candidates will be contacted.</p>

<p>Maintenance Technician</p> <p>A reputable company is seeking a skilled Maintenance Technician to perform repair works, support facility maintenance activities, and ensure smooth daily operations. Freshers are welcome to apply.</p> <p>Responsibilities</p> <p>Perform basic maintenance and repair tasks<br /> Inspect equipment and report issues<br /> Assist with installation and troubleshooting activities<br /> Maintain tools and work areas properly<br /> Follow safety procedures during work activities</p> <p>Benefits</p> <p>Visa provided as per UAE Labor Law<br /> Medical insurance<br /> Career growth opportunities</p> <p>Location: Dubai, UAE<br /> Job Type: Full-Time</p> <p>Apply Now: +971 52 958 5969</p> <p>Only shortlisted candidates will be contacted.</p>

<p><strong><u>Job Family</u></strong> Workshop</p><p><strong><u>Job Level</u></strong> Skilled Worker</p><p><strong><u>Position</u></strong> Reefer Technician</p><p><strong><u>Grade</u></strong> TBD</p><p><strong><u>Reporting to</u></strong> Workshop Manager</p><p><strong><u>Purpose</u> </strong>To use a working knowledge of reefer systems to conduct maintenance, fault-finding, and diagnostics on existing systems. To maintain temperature cooling, to required standards and to maintain those systems while upholding safety guidelines and complying with codes and regulations.</p><p><strong><u>Key Responsibility Areas</u></strong></p><p>· Troubleshooting, diagnosis, and repair of components on truck and trailer refrigeration units.</p><p>· Maintaining transport refrigeration unit on trucks and trailers by performing diagnostics using scanners, electronic test equipment.</p><p>· Completing preventive maintenance, component replacement, and service to refrigeration equipment.</p><p>· Installing various new units on trailers, trucks, and vans.</p><p>· Must do miscellaneous jobs as assigned by manager.</p><p>· Move parts to and from the job site and remove or install these parts on vehicle.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education </strong>High School plus ITI</p><p><strong>Experience</strong> 3-5 years of relevant experience</p><br/><p><strong><u>Key Performance Indicators</u></strong></p><p>· Number of repairs done per day</p><p>· Number of spare parts used per day.</p><p>· Number of delays in diagnosing the problem</p><p>· Number of delays in repairing</p><p><strong><u>Competencies</u></strong></p><p>· Proven experience as a reefer technician</p><p>· Thorough knowledge of safety procedures and legal regulations and guidelines</p><p>· Excellent critical thinking and problem-solving ability</p><p>· Excellent physical condition and flexibility to work long shifts and overnight.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><ul><li><p>Diagnose faults, troubleshoot and carry out repairs</p></li><li><p>Gas charging, coil and filter cleaning, general servicing</p></li><li><p>Attend service calls at customer sites.</p><br><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>Hands-on experience servicing central and split AC systems</p></li><li><p>Able to work independently and handle breakdown calls</p></li><li><p>Currently in the UAE with a transferable visa (or ready to transfer)</p></li><li><p>Basic English / Hindi / Urdu communication</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimize workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working as part of the Quality department on the project, the Lab Technician will be working closely with the Quality Engineers / Construction Engineers / Project Quality Manager to undertake onsite Testing’s (Concrete, FDT, PLT and Etc.,), Other materials testing coordination with approved 3rd party laboratory, Follow up, Tracking, Receiving, Verification, Register and Submission of Test Reports to consultant in coordination with Project Quality Manager and MIR Preparation, Submission and Coordination with consultant for obtaining approval.</p><br><p>Undertake on-site Testing’s (FDT, PLT &amp; Others) of completed works as per requirements of approved ITPs. Undertake on-site Testing’s of Fresh concrete and Sampling works as per Project requirements of approved MSRA. Coordinate with Quality Engineers / Site Engineers / Quality Manager to plan and schedule the testing’s for completed works in advance Coordinate with Consultant Inspector for witnessing of all on-site testing’s Ensure all the Concrete cube samples are timely transported to 3rd laboratory for testing Follow-up with third party laboratory for the pending test reports Monitor Tracker for materials testing and Test Reports to ensure all reports are received Verify all the test reports received as per the project and standard requirements and register into the log Conduct material inspections, raise MIRs to Consultant, and attend inspections as required. Monitor storage of materials on-site and in storage areas to ensure that manufacturer requirements are adhered to. Prepare Test Report submittals for all test reports in coordination with Quality Manager for Consultant review and approval Addressing any failures on Test reports and Noncompliance to the Project Quality Manager</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>2- 5 Years of Experience in the field of construction</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Perform preventive, predictive, and breakdown maintenance on flexible packaging machinery.</p></li><li><p>Dismantle, inspect, repair, refurbish, and refit mechanical equipment and machine components.</p></li><li><p>Install, align, level, and commission new production machines and equipment.</p></li><li><p>Troubleshoot and rectify mechanical failures in extrusion, printing, lamination, slitting, rewinding, pouch-making, and bag-making machines.</p></li><li><p>Carry out maintenance and repairs on <strong>extrusion lines</strong>, including extruders, dies, chill rolls, gearboxes, screw &amp; barrel assemblies, and associated equipment.</p></li><li><p>Perform <strong>plumbing works</strong>, including installation and maintenance of water, cooling, compressed air, pneumatic, hydraulic, and utility piping systems.</p></li><li><p>Repair and replace bearings, shafts, couplings, seals, pumps, valves, motors, conveyors, rollers, and gearboxes.</p></li><li><p>Read and interpret mechanical drawings, P&amp;ID diagrams, equipment manuals, and technical documentation.</p></li><li><p>Perform machine alignment, calibration, lubrication, and precision fitting.</p></li><li><p>Weld, fabricate, cut, and modify machine parts when required.</p></li><li><p>Conduct root cause analysis of recurring mechanical failures and implement corrective actions.</p></li><li><p>Coordinate with production teams to minimize downtime and maximize machine efficiency.</p></li><li><p>Maintain maintenance records, spare parts inventory, and daily work reports.</p></li><li><p>Ensure compliance with safety standards, lockout/tagout (LOTO) procedures, and company policies.</p></li><li><p>Support machine relocation, installation, dismantling, and commissioning projects.</p></li><li><p>Maintain good housekeeping standards within the workshop and production areas.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>Minimum <strong>3–5 years of experience</strong> as a Mechanical Technician in the <strong>Flexible Packaging Industry</strong>.</p></li><li><p>Strong experience in <strong>machine dismantling, reassembly, installation, and alignment</strong>.</p></li><li><p>Hands-on knowledge of <strong>extrusion machines</strong>, flexible packaging production equipment, and utility systems.</p></li><li><p>Experience in <strong>plumbing</strong>, pneumatic, hydraulic, compressed air, chilled water, and cooling systems.</p></li><li><p>Strong troubleshooting skills in mechanical, hydraulic, and pneumatic systems.</p></li><li><p>Experience in preventive and corrective maintenance.</p></li><li><p>Ability to use precision measuring instruments and mechanical tools.</p></li><li><p>Basic welding and fabrication skills are an advantage.</p></li><li><p>Ability to read engineering drawings and maintenance manuals.</p></li><li><p>Good communication and teamwork skills.</p></li><li><p>Willingness to work shifts and respond to emergency breakdowns.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.Identifies and reports any abnormalities. Repairs and /or replaces required items and re-assembles and tests the equipment, leaving the working area clean.Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.Effectively diagnoses electrical breakdowns/failures &amp; troubleshoots electrical failures of plant and equipment with (minimum or) no direction.Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.Monitors any repeated breakdown and recommends proper modification to resolve the problem.Provides plant &amp; equipment knowledge to newly joined electricians/craft trainees and contractors to help them in carrying out their maintenance work.Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.Performs other related duties as communicated by Supervisor/Superior.Assists other departments in the repair and troubleshooting of equipment.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications: Diploma in relevant field. Completion of PEC Craft Training Minimum Experience: 3 Years’ of relevant experience in a heavy industry after Diploma No experience required after completion of PEC Training Skills: A good knowledge of written and spoken English Must be familiar with all maintenance tools and should have good IT knowledge Experience in installation &amp; troubleshooting Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>QUALIFICATIONS &amp; SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>QUALIFICATIONS &amp; SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>To perform a wide range of duties relating to the mechanical installation, repair and maintenance of machinery, equipment and fixtures to ensure their efficient operation at minimum downtime complying with EHS Guidelines with a focus on continuous improvement.</p><br><p><strong>KEY ACCOUNTABILITIES:</strong></p><br><ul><li><p>Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.</p></li><li><p>Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.</p></li><li><p>Performs various works related to welding and fabrication.</p></li><li><p>Mentors newly joined mechanics in order to equip them with the plant &amp; equipment knowledge necessary to carry out maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li><li><p>Inputs data into maintenance management systems for works and manning records.</p></li><li><p>Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.</p></li><li><p>Performs all the PM’S, running inspections &amp; checklists on daily basis issued as per maintenance planning requirements.</p></li><li><p>Perform other related duties as communicated by supervisor/technician.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years’ of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Good working knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools with good computer skills</p></li><li><p>Exposure to installation &amp; troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>· ASSIST THE NEUROLOGIST FOR EEG AND EMG PROCEDURES</p><p>· Acquire appropriate physician order/requisitions</p><br><p><strong>EEG procedures</strong></p><p>· 10-20 electrode placement</p><p>· Brain death recording</p><p>· Sleep deprived EEG</p><p>· Sleep EEG</p><p>· Electromyography</p><br><p>· Demonstrate knowledge of equipment utilization and patient instruction, and accurate lead placement.</p><p>· Prepares patient for testing by attaching monitoring devices and explaining test procedures.</p><p>· Sets up and calibrates necessary equipment</p><p>· Reviews patient records and interviews patients to obtain additional information</p><p>· Records observations and analyzes test data to ensure appropriate data is collected.</p><p>· Maintains lab equipment, ensures room is clean, institutes quality control procedures</p><p>· Troubleshoots malfunctions and performs minor repairs</p><p>· Write patient information in the medical records notebook.</p><p>· Enter patient information in the EEG Log Book.</p><p>· Demonstrates knowledge of growth and development</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong><u>CORE COMPETENCIES :</u></strong></p><ul><li>Sensitive to the patient’s physical and physiological needs.</li><li>Detail oriented and must follow instructions.</li><li>Teamwork and spirit.</li><li>Ability to operate complicated equipment that requires mechanical stability and manual dexterity.</li><li>Communication of interpersonal skills.</li><li>Service orientation.</li><li>Strong judgement.</li><li>Ability to cope with stress.</li></ul><br><p><strong><u>RECORDS TO MAINTAIN :</u></strong></p><p>Maintain and make all required records of the Neurology department.</p><p></p></section>

<p>A reputable company is seeking a skilled and detail-oriented Laboratory Technician to support laboratory operations and ensure accurate testing and reporting.</p> <p>Responsibilities:</p> <p>Perform laboratory tests and analysis according to procedures<br /> Prepare samples, materials, and laboratory equipment<br /> Record and maintain accurate test results and documentation<br /> Ensure compliance with safety and quality standards<br /> Maintain cleanliness and proper handling of laboratory tools<br /> Applicants may send cv via email address aaglobalservicellc@gmail.com</p>

<p>A reputable company is seeking a skilled and detail-oriented Laboratory Technician to support laboratory operations and ensure accurate testing and reporting.</p> <p>Responsibilities:</p> <p>Perform laboratory tests and analysis according to procedures<br /> Prepare samples, materials, and laboratory equipment<br /> Record and maintain accurate test results and documentation<br /> Ensure compliance with safety and quality standards<br /> Maintain cleanliness and proper handling of laboratory tools<br /> Applicants may send cv via email address aaglobalservicellc@gmail.com</p>