وظائف مهندس الكترونيات - ابو ظبي الإمارات

<p>Job Description •Lead and manage DC System Replacement Projects from initiation to completion. •Coordinate with clients to address inquiries related to company product offerings. •Conduct site visits during both tendering and project execution stages. •Prepare and manage technical and commercial inquiries related to substation solutions within the product portfolio. •Develop cost estimations and prepare technical & commercial offers for quotations and tender submissions. •Supervise and execute installation, testing, and commissioning of DC systems. •Ensure all project activities comply with safety regulations and quality standards. •Attend and support site works at TRANSCO and EWE locations as required. •Prepare and review RMD (Red Mark) drawings and As-built drawings using AutoCAD. •Ensure all drawings accurately reflect final site conditions after project completion. •Review drawings received from OEMs and provide feedback/comments for necessary corrections. •Manage all project-related documentation including drawing submissions, prepare and submit SAT (Site Acceptance Test) reports and other required documentation as per client requirements</p><p>Additional candidate Requirements • Experience in installation of DC system, Battery chargers, DB etc is preferred • Candidates with TAQA competency certificate is optional • BTECH Degree in Electrical/Electronics • Min. 2 years' experience in UAE • UAE Valid DL</p>

<p>Job Description •Lead and manage DC System Replacement Projects from initiation to completion. •Coordinate with clients to address inquiries related to company product offerings. •Conduct site visits during both tendering and project execution stages. •Prepare and manage technical and commercial inquiries related to substation solutions within the product portfolio. •Develop cost estimations and prepare technical & commercial offers for quotations and tender submissions. •Supervise and execute installation, testing, and commissioning of DC systems. •Ensure all project activities comply with safety regulations and quality standards. •Attend and support site works at TRANSCO and EWE locations as required. •Prepare and review RMD (Red Mark) drawings and As-built drawings using AutoCAD. •Ensure all drawings accurately reflect final site conditions after project completion. •Review drawings received from OEMs and provide feedback/comments for necessary corrections. •Manage all project-related documentation including drawing submissions, prepare and submit SAT (Site Acceptance Test) reports and other required documentation as per client requirements</p><p>Additional candidate Requirements • Experience in installation of DC system, Battery chargers, DB etc is preferred • Candidates with TAQA competency certificate is optional • BTECH Degree in Electrical/Electronics • Min. 2 years' experience in UAE • UAE Valid DL</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a motivated Sales Engineer to join our team. The role involves supporting the sales team, coordinating with clients and customers, providing basic technical support, identifying new business opportunities, generating leads, and assisting in expanding the company's customer base.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br>Education: Bachelor's Degree in Engineering (Electrical, Electronics, Mechanical ,Instrumentation)</p><br><p>Experience: Freshers or candidates with up to 2 years of experience in fire and safety field can apply.</p><br><p>Skills: Good communication skills Basic MS Office knowledge Technical sales or customer support experience is an advantage Willingness to learn and work in a team UAE Driving License is an added advantage (not mandatory)</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Strong Knowledge on BMS controllers, Field devices, and protocols.</p></li><li><p>Commissioning and testing BMS systems (Niagara based) to ensure optimal performance and compliance.</p></li><li><p>Reviewing and interpreting technical drawings, specifications, and control strategies.</p></li><li><p>Configuring and integrating BMS hardware and software, including graphics, point mapping, and alarms.</p></li><li><p>Troubleshooting, fault-finding, and resolving on-site commissioning issues.</p></li><li><p>Validate complete system functionality and troubleshoot problems with contractors/other vendors.</p></li></ul><p>Supporting project handover with full documentation, training, and operational support</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Electronics, Electrical or related engineering field.&nbsp;&nbsp;&nbsp;</p></li><li><p>Experience: 2+ years of experience in BMS Commissioning.</p></li></ul><br><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description – Audio Visual (AV) Engineer / Programmer</p><p><strong>Position:</strong> Audio Visual (AV) Engineer / Programmer<br><strong>Experience Required:</strong> Minimum 3 Years<br><strong>Location:</strong> UAE<br><strong>Employment Type:</strong> Full-Time</p><p>Job Summary</p><p>We are seeking a skilled and motivated <strong>Audio Visual (AV) Engineer / Programmer</strong> with a minimum of 3 years of experience in designing, programming, commissioning, and supporting integrated AV systems. The ideal candidate will have hands-on experience with AV control systems, conferencing solutions, video distribution, digital signage, and automation platforms. The role involves programming, troubleshooting, system integration, and providing technical support for commercial, corporate, hospitality, educational, and government projects.</p><p>Key Responsibilities</p><ul><li><p>Design, configure, program, and commission Audio Visual and control system solutions.</p></li><li><p>Develop and modify programming for AV control systems and automation platforms.</p></li><li><p>Configure touch panels, control processors, DSPs, video conferencing systems, and networked AV devices.</p></li><li><p>Perform system testing, troubleshooting, and commissioning to ensure optimal performance.</p></li><li><p>Integrate audio, video, control, and communication systems into a unified solution.</p></li><li><p>Read and interpret AV system drawings, schematics, and technical specifications.</p></li><li><p>Provide onsite and remote technical support to clients and project teams.</p></li><li><p>Coordinate with project managers, engineers, and installation teams during project execution.</p></li><li><p>Conduct system training and handover sessions for end users and clients.</p></li><li><p>Prepare technical documentation, programming backups, and as-built records.</p></li><li><p>Diagnose and resolve hardware, software, and network-related AV issues.</p></li><li><p>Ensure project delivery complies with client requirements and industry standards.</p></li><li><p>Stay updated on emerging AV technologies and industry best practices.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements</p><ul><li><p>Bachelor's Degree or Diploma in Electronics, Electrical Engineering, Computer Engineering, Information Technology, or a related field.</p></li><li><p>Minimum 3 years of experience in Audio Visual system programming, integration, and support.</p></li><li><p>Strong understanding of AV system architecture and signal flow.</p></li><li><p>Experience with AV control systems, conferencing solutions, and digital media technologies.</p></li><li><p>Knowledge of networking fundamentals, IP-based AV systems, and system troubleshooting.</p></li><li><p>Ability to read technical drawings and wiring schematics.</p></li><li><p>Strong communication and problem-solving skills.</p></li><li><p>Ability to work independently and as part of a project team.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p><strong>Role Overview </strong></p><br><p>As a Research and Development Engineer (Mechanical Design), you will be responsible for the structural design, analysis, and mechanical integration of next-generation UAV platforms and robotic systems. You will lead the development of airframes, enclosures, and deployment mechanisms from initial concept through to physical prototyping. Working closely with aerodynamicists, materials specialists, and electronics teams, you will ensure that our platforms are lightweight, structurally optimized, and rugged enough to withstand demanding operational environments. This role bridges advanced CAD engineering with hands-on workshop prototyping and field-test validation. </p><br><p><strong>Key Responsibilities </strong></p><br><p>• Structural &amp; Airframe Design: Conceptualize and design primary airframe structures, component layouts, and mechanical subsystems for large-scale UAVs and robotic platforms using advanced 3D CAD software. </p><p>• Material Selection &amp; Optimization: Select and design with advanced materials, focusing heavily on carbon fiber composites, aerospace-grade aluminum, and additive manufacturing (3D printing) technologies to maximize structural strengthto-weight ratios. </p><p>• Mechanism &amp; Payload Integration: Design robust internal mounting structures, rugged environmental enclosures, and deployment mechanisms for critical payloads, sensors, avionics, and power plants (including electric and turbojet propulsion systems). </p><p>• Simulation &amp; Analysis (FEA): Perform static, dynamic, and modal Finite Element Analysis (FEA) to validate structural integrity, analyze stress concentrations, and optimize designs against high-vibration and aerodynamic flight loads. </p><p>• DFM/DFA Alignment: Apply Design for Manufacturing (DFM) and Design for Assembly (DFA) principles to ensure components can be reliably fabricated via CNC machining, composite molding, or 3D printing. </p><p>• Prototyping &amp; Assembly Collaboration: Work directly with the workshop team to fabricate, assemble, and modify mechanical prototypes, resolving tolerance stackups and physical integration challenges on the fly. </p><p>• Field Test Support: Participate in flight test campaigns to evaluate mechanical reliability under real-world conditions, analyzing structural wear, vibration data, and landing impacts to drive iterative design improvements. </p><br><p><strong>Required Qualifications </strong></p><br><p>• Education: Bachelor’s degree or equivalent in Mechanical Engineering, Aerospace Engineering, Mechatronics, or a highly related technical field. </p><p>• Experience: Minimum of 5 years of professional experience in mechanical product design, specifically focused on UAV platforms, aerospace structures, or complex mobile robotic systems. </p><p>• UAV Scale Familiarity: Proven track record contributing to defense-industry or heavy-industrial UAV projects, preferably involving fixed-wing or multirotor aircraft above 20kg Maximum Takeoff Weight (MTOW). </p><p>• CAD Expertise: Advanced proficiency in professional 3D CAD suites (e.g., SolidWorks, CATIA, or Siemens NX) with a strong command of complex surface modeling and assembly management. </p><p>• CAE Capabilities (preferable): Demonstrated experience utilizing FEA tools (e.g., ANSYS, SolidWorks Simulation, or Altair HyperMesh) for structural, thermal, and vibration analysis. </p><p>• Manufacturing Knowledge: Deep understanding of composite manufacturing processes, precision CNC machining, sheet metal fabrication, and geometric dimensioning and tolerancing (GD&amp;T), DFMEA. </p><p>• Environmental Ruggedization: Familiarity with designing for harsh environments, including ingress protection (IP ratings), thermal management, and vibration/shock isolation for sensitive electronics. </p><p>• Field &amp; Team Agility: Willingness to support outdoor field testing, troubleshoot mechanical assemblies in real-world environments, and collaborate seamlessly across hardware, software, and systems engineering disciplines. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor’s degree or equivalent in Mechanical Engineering, Aerospace Engineering, Mechatronics, or a highly related technical field.</p><p>Minimum of 5 years of professional experience in mechanical product design, specifically focused on UAV platforms, aerospace structures, or complex mobile robotic systems. </p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Lead the design and implementation of complex control systems for industrial processes, ensuring optimal performance and safety.</li><li>Develop and execute commissioning plans for new instrumentation and control systems, troubleshooting issues to ensure seamless integration.</li><li>Provide expert technical guidance and mentorship to junior engineers and technicians on instrumentation and control engineering principles.</li><li>Oversee the selection, specification, and procurement of critical instrumentation and control hardware and software components.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's or Master's degree in Electrical, Electronics, Instrumentation Engineering, or a related field.</p></li><li><p>Minimum of 15 years of progressive experience in instrumentation and control engineering within the chemical, oil &amp; gas, or pharmaceutical industry.</p></li><li><p>Professional Engineer (PE) license or relevant professional certifications (e.g., ISA Certified Control Systems Engineer - CCSE) are highly desirable.</p></li><li><p>Proficiency in PLC/DCS programming (e.g., Siemens, Rockwell, Honeywell) and SCADA systems.</p></li></ul><br><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in Pipeline / Oil &amp; Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><br><p><strong>Age Criteria:</strong></p><ul><li><p>Maximum age limit is 49 years</p></li><li><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience</p></li></ul><br><p><strong>Managerial and SR. Positions:</strong></p><ul><li><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>•&nbsp;&nbsp;&nbsp;Perform testing, commissioning, and troubleshooting of ELV system.</p><ul><li><p>Review shop drawings, schematics, wiring diagrams, and as-built documentation.</p></li><li><p>Coordinate with ADMCC, consultants, contractors, and other MEP/ELV teams during project execution.</p></li><li><p>Perform system programming, testing, troubleshooting, and integration with third-party systems.</p></li><li><p>Conduct site surveys and ensure proper installation as per approved drawings and specifications.</p></li><li><p>Attend client meetings, technical discussions, and inspections.</p></li><li><p>Support commissioning activities and final handover documentation.</p></li><li><p>Diagnose and resolve system faults related to ELV and network communication.</p></li><li><p>Coordinate with suppliers and manufacturers for technical support and material approvals.</p></li><li><p>Ensure compliance with project specifications, standards, and authority requirements.</p></li><li><p>Provide training and technical support to clients and maintenance teams.</p></li><li><p>Monitor project progress and support timely project delivery.</p></li><li><p>ADMCC submission &amp; ensuring compliance.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Electronics, Electrical or related engineering field.&nbsp;&nbsp;&nbsp;</p></li><li><p>Experience: 3+ years of experience in ELV Commissioning.</p></li></ul><p></p></section>

<br><ul><li><p>Execute end-to-end instrumentation pre-commissioning, commissioning, startup, and system handover activities for Oil & Gas EPC projects.</p></li><li><p>Perform calibration, loop checking, functional testing, and troubleshooting of field instruments, control valves, analyzers, PLC, DCS, ESD, and F&G systems.</p></li><li><p>Coordinate with Construction, Electrical, QA/QC, Operations, and Client teams to ensure safe and timely project execution.</p></li><li><p>Conduct system walkdowns, manage punch lists, verify mechanical completion, and support plant startup activities.</p></li><li><p>Ensure compliance with project specifications, IEC/ISA standards, client requirements, and HSE regulations.</p></li><li><p>Prepare commissioning procedures, test records, as-built documentation, and final handover dossiers.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Instrumentation/Electronics Engineering with 10+ years of Instrumentation Commissioning experience in Oil & Gas EPC projects. UAE/GCC experience preferred.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Configure, and commission GRMS (Guest Room Management System) and Lighting Control Systems.</p></li><li><p>Review shop drawings, schematics, wiring diagrams, and as-built documentation.</p></li><li><p>Coordinate with consultants, contractors, and other MEP/ELV teams during project execution.</p></li><li><p>Perform system programming, testing, troubleshooting, and integration with third-party systems.</p></li><li><p>Configure and integrate protocols such as KNX, DALI, Modbus, BACnet, and TCP/IP.</p></li><li><p>Conduct site surveys and ensure proper installation as per approved drawings and specifications.</p></li><li><p>Attend client meetings, technical discussions, and inspections.</p></li><li><p>Support commissioning activities and final handover documentation.</p></li><li><p>Diagnose and resolve system faults related to lighting control, GRMS, dimming systems, sensors, and network communication.</p></li><li><p>Coordinate with suppliers and manufacturers for technical support and material approvals.</p></li><li><p>Ensure compliance with project specifications, standards, and authority requirements.</p></li><li><p>Provide training and technical support to clients and maintenance teams.</p></li><li><p>Monitor project progress and support timely project delivery.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s Degree or Diploma in Electrical / Electronics / Automation Engineering or related field.</p></li><li><p>Experience in hotels, hospitality, villas, or high-end residential projects.</p></li><li><p>Knowledge of Honeywell, ABB, Schneider, Interel, or similar automation systems.</p></li><li><p>UAE/GCC project experience preferred.</p></li><li><p>UAE Valid driving license is an added advantage.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p><strong>1.Designation: Senior Project Engineer E &amp; I</strong></p><br><p><strong>Duties and Responsibilities</strong></p><ul><li><p>Handling the projects right from the award through the execution till close out &amp; handing over.</p></li><li><p>Review &amp; analyze project SOW, specifications, developing work schedules, and delegating tasks to different team members.</p></li><li><p>Preparation &amp; Review basic and detailed engineering design for compliance with engineering principles, company standards, customer contract requirements, and related specifications.</p></li><li><p>Provide support and advice to the Project Manager with regards to project engineering issues and resources during all phases of the project.</p></li><li><p>Responsible for Project execution and timely completion of project as per project schedule and within the budget allocated.</p></li><li><p>Interface with the various Engineering disciplines and Drafting team as well as other projects, project functions and vendors to deliver assigned work scope.</p></li><li><p>Conduct &amp; attend meetings with Client, Vendors &amp; Contractors on an ongoing basis regarding project objectives and progress.</p></li><li><p>Day to day correspondence with Client, Vendor, Site etc.</p></li><li><p>Preparation and Review of various Engineering Deliverables.</p></li><li><p>Raise Clarification &amp; Deviations.</p></li><li><p>Floating enquiry, review quotations, coordinate with the vendor for any technical clarification required.</p></li><li><p>Analysis quotations received to ensure compliance with the specification.</p></li><li><p>Carryout onshore and offshore Site Visit, Survey &amp; Data Collection as required.</p></li><li><p>Monitor, gather, analyze, review &amp; report Project Progress to Client &amp; Management.</p></li><li><p>Reviews and evaluates with the Project Manager the progress of vendors and contracts at site and in Yard (as applicable) under project controls and for payment approvals.</p></li><li><p>Manage Site Execution including the Sub-contractors in a manner to achieve quality installations and meet performance parameters set out in the SOW.</p></li><li><p>Monitor &amp; Co-ordinate Day to Day site construction activities.</p></li><li><p>Attend FAT, SAT and provide commissioning assistance as necessary.</p></li><li><p>Conducting post-project evaluation and identifying successful and unsuccessful project elements.</p></li><li><p>Prepares interim and completion project reports.</p></li><li><p>Contribute in the tender preparation, bid evaluation and contract award processes in accordance with Company s policies to ensure corporate objectives are met.</p></li><li><p>Review and provide input to the QA/QC procedures.</p></li><li><p>Familiarize with Marine &amp; vessel operations management of offshore campaign spread, Project &amp; Interface Management of offshore project.</p></li><li><p>Undergo required trainings.</p></li><li><p>Comply to Company and Client HSE policy and regulation.</p></li><li><p>Alert any HSE and policy violations.</p></li><li><p>Comply to Company rules &amp; regulation.</p></li><li><p>Comply to UAE law &amp; regulation.</p></li><li><p>Any other duties and responsibilities as assigned from time to time</p></li><li><p>Analysis quotations received to ensure compliance with the specification.</p></li><li><p>Site Survey &amp; Data Collection</p></li><li><p>Attend Meetings</p></li><li><p>Attending FAT, SAT</p></li><li><p>Commissioning assistance</p></li><li><p>Assist Tender Team as and when required.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Requirements</strong></p></li><li><p>Bachelor’s degree in electrical engineering with Minimum 14-20 years of relevant experience in a professional technical capacity and minimum 5-8years’ experience in EPC Oil and Gas projects.</p></li></ul><p>Job Type: Full-time</p><p><br></p><p><strong>Education:</strong></p><ul><li><p>Bachelor's of Engineering(Electrical,Electronics,Instrumentation Engineering)</p></li></ul><br><p><strong>Experience:</strong></p><ul><li><p>E&amp;I Project Engineer: 10 years (Preferred)</p></li></ul><br><p><strong>2.Designation : Sr.Planning Engineer E&amp;I</strong></p><br><p><strong>Roles &amp; Responsibilities:</strong></p><ul><li><p>Prepare comprehensive planning packages, including WBS, baseline project L3/L4 schedules, Engineering Documents Deliverables Register (EDDR), progress measurement systems, S-curves, manpower histograms, project calendars, critical path analyses, and recovery plans.</p></li><li><p>Develop and maintain EPC implementation schedules in Primavera.</p></li><li><p>Update and maintain accurate schedules, progress statistics, and S-curves, while preparing forecasts and trend analyses.</p></li><li><p>Act as the focal point for engineering discipline leads on scheduling and progress issues.</p></li><li><p>Prepare weekly and monthly progress reports, ensuring accurate and timely updates.</p></li><li><p>Analyse project risks and develop effective mitigation plans.</p></li><li><p>Recognize and report potential project issues to management in all phases of the project.</p></li><li><p>Review and understand all relevant project documentation, including scope of services, contract conditions, and project execution plans.</p></li><li><p>Assist management in decision-making and perform support functions as needed.</p></li><li><p>Knowledge about Extension of Time (EOT) claims.</p></li><li><p>Conduct resource planning and forecasting for projects and activities.</p></li><li><p>Utilize planning software (e.g., Primavera P6, MS Project) to create, update, and maintain project schedules.</p></li><li><p>Facilitate effective communication and coordination among project team members, clients, and consultants.</p></li><li><p>Address stakeholder concerns and provide timely updates on project status and issues.</p></li></ul><p>Prepare payment applications and delay/EOT letters</p><br><p><strong>Requirements:</strong></p><ul><li><p>Bachelor’s degree in engineering, Project Management, or a related field.</p></li><li><p>7-8 years of experience in ADNOC projects, with a solid understanding of ADNOC project control requirements.</p></li><li><p>Proven experience in project planning and scheduling, particularly in the EPC industry.</p></li><li><p>Proficiency in Primavera P6 and MS Excell.</p></li><li><p>Strong understanding of delay analysis, EOT claims.</p></li></ul><br><p>Education:</p><br><p>Bachelors of Engineering(Electrical/Electronics &amp; Communication/Instrumentation)</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We, at Emarat Aloula is seeking a skilled and experienced Instrumentation (PLC/SCADA) Engineer to support the operation, maintenance, troubleshooting, and calibration of instrumentation and automation systems for our Wastewater Treatment Plant (Odour Control Project).</p><p><br>The ideal candidate should possess strong hands-on experience in PLC, SCADA, industrial networks, instrumentation calibration, and maintenance, particularly within wastewater treatment or sewage treatment plant (STP) applications.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Perform maintenance, troubleshooting, and calibration of field instrumentation systems</p></li><li><p>Handle calibration and maintenance of STP instruments including:</p></li></ul><p>o Dissolved Oxygen (DO) analyzers</p><p>o pH analyzers</p><p>o Flow transmitters</p><p>o Level transmitters</p><p>o Pressure transmitters</p><ul><li><p>Support operation and maintenance of PLC, SCADA, and HMI systems</p></li><li><p>Configure, troubleshoot, and maintain <strong>SIEMENS S7-1500 PLC </strong>systems</p></li><li><p>Work extensively with SIEMENS TIA Portal Software and Comfort Panel HMIs</p></li><li><p>Support and maintain industrial communication networks and protocols including:</p></li></ul><p>o PROFIBUS</p><p>o DEVICE-NET</p><p>o Modbus TCP/IP</p><p>o Modbus RTU</p><ul><li><p>Perform basic configuration and troubleshooting of industrial network switches, including SIEMENS SCALANCE switches</p></li><li><p>Configure IP settings and replace faulty switches when required</p></li><li><p>Support operation and maintenance of VFD motors and related systems</p></li><li><p>Assist in SCADA monitoring, diagnostics, and system optimization</p></li><li><p>Support preventive and corrective maintenance activities for instrumentation and automation systems</p></li><li><p>Coordinate with operations and maintenance teams to ensure system reliability and minimal downtime</p></li><li><p>Maintain proper documentation, reports, and maintenance records</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s Degree in <strong>Electronics Engineering, Instrumentation Engineering</strong>, or related discipline</p></li><li><p>Minimum 5+ years of relevant experience in instrumentation, PLC, and SCADA systems</p></li><li><p><strong>Proven experience in wastewater treatment / STP applications</strong></p></li><li><p>Strong hands-on experience in instrument calibration and maintenance</p></li><li><p>Mandatory experience with:</p></li></ul><p><strong>o SIEMENS S7-1500 PLC</strong></p><p><strong>o SIEMENS TIA Portal Software</strong></p><p><strong>o Comfort Panel HMIs</strong></p><ul><li><p>Experience in industrial network management and SCADA systems</p></li><li><p>Familiarity with WinCC Open Architecture (WinCC OA) or other SCADA software is preferred</p></li></ul><p><strong>Skills &amp; Competencie</strong>s</p><ul><li><p>Strong troubleshooting and analytical skills</p></li><li><p>Good understanding of industrial automation and instrumentation systems</p></li><li><p>Knowledge of industrial communication protocols and networking basics</p></li><li><p>Ability to interpret technical drawings, control schematics, and P&amp;IDs</p></li><li><p>Good communication and coordination skills</p></li><li><p>Ability to work independently and under pressure in plant environments</p></li></ul><p><strong>Preferred Attributes</strong></p><ul><li><p>Experience in odour control, STP, or utility infrastructure projects</p></li><li><p>Familiarity with UAE utility or infrastructure projects is an advantage</p></li><li><p>Immediate or short notice availability</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>� We're Hiring: Senior Estimation Engineer (Instrumentation) � � Location: Abu Dhabi, UAE � Industry: Oil &amp; Gas / EPC Projects Falcor Engineering &amp; Contracting Services is seeking an experienced Estimation Engineer (Instrumentation) to lead the preparation of technical and commercial bids for major Oil &amp; Gas EPC projects. The ideal candidate will have extensive experience in instrumentation estimation, tendering, cost analysis, subcontractor/vendor management, and bid preparation within the UAE Oil &amp; Gas sector. Key Responsibilities ✅ Lead and coordinate the preparation of technical and commercial bid submissions for Instrumentation and Control System projects. ✅ Review tender documents, specifications, drawings, and scope requirements to ensure bid completeness and compliance. ✅ Participate in pre-bid meetings, post-bid meetings, site surveys, and client clarification discussions. ✅ Prepare and verify detailed Material Take-Offs (MTOs) and quantity take-offs for instrumentation works. ✅ Coordinate with subcontractors and vendors, obtain quotations, perform technical and commercial evaluations, and prepare bid comparison sheets. ✅ Collaborate with Project, HSE, Quality, Planning, Procurement, Finance, and other departments to obtain required bid inputs. ✅ Develop detailed cost estimates, including direct and indirect costs, manpower, materials, subcontracting, and project execution requirements. ✅ Identify project risks and establish appropriate contingency allowances within the estimate. ✅ Ensure technical and commercial proposals fully comply with client specifications and tender requirements. ✅ Present bid summaries and cost estimates to management for review and approval. ✅ Provide support during post-award handover and project execution clarification stages. Alternatively, you may also connect with and reach out to Falcor's Lead HR, **Uzma Ehsan Al Haq**, on LinkedIn</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements � Bachelor's Degree in Instrumentation Engineering, Electronics Engineering, or a related discipline. � 12–15 years of total experience, including a minimum of 6–8 years in UAE Oil &amp; Gas projects. � Proven experience in Instrumentation estimation, tendering, bid preparation, and cost estimation for EPC projects. � Strong knowledge of instrumentation systems, field instruments, control systems, PLC, DCS, ESD, SCADA, and associated EPC project requirements. � Experience preparing MTOs, quantity take-offs, technical evaluations, and commercial bid submissions. � Strong understanding of subcontractor and vendor management processes. � Experience with ADNOC projects, standards, and tender requirements is highly preferred. � Excellent analytical, communication, negotiation, and presentation skills.</p><br><p>What We're Looking For ✔ Strong technical and commercial acumen. ✔ Proven ability to lead complex bid submissions and meet tight deadlines. ✔ Excellent stakeholder management and cross-functional coordination skills. ✔ Strong attention to detail and commitment to delivering accurate and competitive proposals.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Al Tayer Engineering is looking for a dynamic and motivated Junior Sales Engineer – BMS to join our growing Building Management Systems (BMS) team. The successful candidate will support business development activities and drive sales of BMS, PICV, BTU Meters, Thermostats, VAVs, and related energy management solutions in Abu Dhabi Market. This role offers an excellent opportunity for engineering graduates and early-career sales professionals to develop their technical and commercial expertise within the building automation industry.</p><p><strong>Functional Roles and Responsibilities:</strong></p><ul><li><p>Support the sales team in promoting Honeywell BMS, BTU Meters, PICVs, Thermostats, VAVs, and related solutions.</p></li><li><p>Identify and develop new business opportunities with MEP contractors, consultants, facility management companies, and end users.</p></li><li><p>Prepare technical and commercial proposals, quotations, and tender submissions.</p></li><li><p>Conduct product presentations and technical discussions with customers.</p></li><li><p>Follow up on leads, inquiries, and quotations to convert opportunities into orders.</p></li><li><p>Assist in project tracking, order processing, and customer relationship management.</p></li><li><p>Coordinate with engineering and operations teams to ensure timely project execution and customer satisfaction.</p></li><li><p>Maintain regular visits to customers and consultants to strengthen business relationships.</p></li><li><p>Gather market intelligence on competitors, pricing, and upcoming projects.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in mechanical, Electrical, Electronics, Instrumentation, or related Engineering discipline.</p></li><li><p>2–5 years of experience in sales, estimation, or engineering related to BMS, HVAC controls, or MEP systems.</p></li><li><p>Fresh graduates with a strong interest in technical sales are encouraged to apply.</p></li><li><p>Knowledge of BMS, HVAC systems, BTU meters, PICVs, VAVs, and energy management solutions will be an advantage.</p></li><li><p>Good communication, presentation, and interpersonal skills.</p></li><li><p>Strong customer-oriented and result-driven mindset.</p></li><li><p>Proficiency in MS Office applications.</p></li><li><p>UAE Driving License must</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design, develop, and implement control systems and instrumentation for industrial processes, ensuring optimal performance and safety.</li><li>Calibrate and maintain a wide range of instruments, including sensors, transmitters, and control valves, to guarantee accuracy and reliability.</li><li>Troubleshoot and resolve complex instrumentation and control system issues, minimizing downtime and production losses.</li><li>Develop and execute testing procedures for new instrumentation and control system installations, ensuring compliance with specifications.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Instrumentation Engineering, Electronics and Communication Engineering, or a related field from a reputed institution.</p></li><li><p>Minimum of 13 years of hands-on experience in industrial instrumentation and control systems, preferably in the chemical or manufacturing sector.</p></li><li><p>Proficiency in PLC, DCS, and SCADA system configuration, programming, and troubleshooting.</p></li><li><p>Strong understanding of process control principles, feedback loops, and control loop tuning.</p></li></ul><br><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in Pipeline / Oil &amp; Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><br><p><strong>Age Criteria:</strong></p><ul><li><p>Maximum age limit is 49 years</p></li><li><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience</p></li></ul><br><p><strong>Managerial and SR. Positions:</strong></p><ul><li><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory</p><br></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design, implement, and maintain robust telecommunication networks, ensuring optimal performance and reliability for voice and data services.</li><li>Troubleshoot and resolve complex network issues, minimizing downtime and ensuring seamless communication for end-users.</li><li>Configure and manage network hardware and software, including routers, switches, firewalls, and transmission equipment.</li><li>Conduct site surveys and assessments to plan and deploy new network infrastructure, considering geographical constraints and client requirements.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, Electronics and Communication Engineering, Computer Science, or a related field.</p></li><li><p>Possession of relevant certifications such as CCNA, CCNP, JNCIA, or equivalent demonstrates advanced networking knowledge.</p></li><li><p>Minimum of 13 years of hands-on experience in designing, deploying, and troubleshooting telecommunication systems.</p></li><li><p>Proven experience working with diverse network technologies including GSM, LTE, 5G, fiber optics, and IP networking.</p></li></ul><br><p><strong>Eligibility Criteria</strong></p><p>✔ Experience in Pipeline / Oil &amp; Gas / EPC / Flowline / Wellhead / Brownfield / Upstream / Onshore</p><p>✔ Gulf / ADNOC experience preferred</p><p>✔ Clean-shaven policy applicable</p><p>❌ Candidates with Metro / Building / Road Infrastructure experience are not eligible</p><br><p><strong>Age Criteria:</strong></p><ul><li><p>Maximum age limit is 49 years</p></li><li><p>For managerial positions, this may be extended up to 50 years if the candidate has significant Gulf experience</p></li></ul><br><p><strong>Managerial and SR. Positions:</strong></p><ul><li><p>A minimum of 5 years of Gulf experience in the relevant field is mandatory</p><br></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>· Develop and design comprehensive Life Safety systems interface with all 3rd party equipment as per code requirement</p><p>· Hands on Experience in preparing LUX level, Heat Dissipation, SPL, Voltage drop and all similar calculations for FLS systems</p><p>· Attend technical and coordination meetings with consultants and contractors to resolve design issues.</p><p>· Review engineering drawings and ensure that all necessary approvals for systems are obtained in a timely manner.</p><p>· Design systems in accordance with project specifications and requirements, while managing NFPA/Civil Defense and client technical reviews to ensure compliance with technical and constructability standards.</p><p>· Work collaboratively with multidisciplinary teams including architects, engineers, and contractors to facilitate seamless project execution.</p><p>· Implement quality assurance and control procedures to guarantee that the delivered systems align with design intent and meet client expectations.</p><p>· Should be able to supervise assigned 2D &amp; 3D Drafting team</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Experience: </strong>Minimum 8 Years</p><p><strong>Work Location:</strong> Site Office, Abu Dhabi</p><p><strong>Education:</strong> Degree in Electrical or Electronics or Equivalent</p><p><strong>System Expertise:</strong> Fire Alarm, Voice Evacuation, Central Battery System, Smoke Detection System</p><p><strong>Preferred:</strong> Good Knowledge in NFPA, UAE Civil Defense Regulations.</p><p></p></section>

<p>Location: Ruwais Refinery</p><p>Functional Area: Refinery Maintenance (Mechanical, Electrical, Control &amp; Workshop)</p><p><br></p><p>Purpose of Job</p><ul><li>Provides specialized technical guidance and support in control maintenance department for engineering, troubleshooting and failure analysis of a wide range of instrumentation and associated control systems, such as ESD, BMS, PLCs, CCC, MCM, TGS, CTM, MOV systems, Turbine Controls, Marine Systems (MLA / VRU /Ship Mooring Systems etc), related network systems, Field Instrumentation, Control Valves, shutdown valves, Flare Instruments etc. </li><li>Reviews and participates in the design and development of related projects. </li><li>Prepares scope of work / statement of requirements for new improvement projects. </li><li>Participates in technical bid evaluations. </li><li>Assesses the reliability of critical control packages and makes recommendations for enhancement. </li><li>Evaluates and recommends enhancement of system reliability. Initiates and follows up with Vendors / Manufacturers for getting the right material on time to ensure the equipment availability. </li><li>Ensure full Compliance to all HSE related requirements. Participates in the preparation of annual budgets and five-year plans. </li><li>Participates in review of control related Company DGS and facilities in various internal and external audits activities.</li></ul><p><br></p><p>Minimum Job Requirements</p><ul><li>B. Sc. in Instrumentation or Electronics engineering</li><li>8 years of experience in maintenance, troubleshooting and installation of a wide range of instrumentation and microprocessor based advanced control systems in an oil/gas, petrochemical industry and/or power generation plant</li><li>The job incumbent should possess a great deal of knowledge in control systems of his area and other systems installed at Company such as microprocessor based advanced control systems, DCS &amp; ESD (Preferably Yokogawa Systems), PLC, MCM, CCC and smart field instruments critical equipment and prime movers control and protection. </li><li>On-going knowledge update in instrumentation and control systems to catch on the fast modernization and avoid obsolescence surprises, and ensure systems availability/reliability.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Role Overview</strong></p><p>We are looking for an experienced Automation &amp; Instrumentation professional to lead the design, implementation, and optimization of industrial automation systems across large-scale manufacturing operations. The incumbent will play a critical role in project execution, process control enhancement, digital transformation initiatives, and maintenance reliability programs while ensuring operational excellence and safety compliance.</p><p><strong>Key Responsibilities</strong></p><p><strong>Project Engineering &amp; Execution</strong></p><ul><li><p>Lead automation and instrumentation activities for Greenfield and Brownfield projects from conceptualization through commissioning.</p></li><li><p>Develop technical specifications, engineering drawings, control philosophies, and functional design documents.</p></li><li><p>Coordinate with OEMs, EPC contractors, consultants, and internal stakeholders to ensure successful project delivery.</p></li><li><p>Manage project schedules, budgets, procurement activities, and site execution milestones.</p></li></ul><p><strong>Automation &amp; Control Systems</strong></p><ul><li><p>Design, configure, and maintain PLC, SCADA, DCS, and industrial communication networks.</p></li><li><p>Drive control system upgrades, modernization projects, and technology migration initiatives.</p></li><li><p>Develop and implement automation strategies to improve plant productivity, reliability, and energy efficiency.</p></li><li><p>Support advanced process control and optimization initiatives.</p></li></ul><p><strong>Instrumentation &amp; Maintenance</strong></p><ul><li><p>Oversee installation, calibration, commissioning, and troubleshooting of field instruments and control equipment.</p></li><li><p>Establish preventive and predictive maintenance practices for automation assets.</p></li><li><p>Conduct root cause analysis of system failures and implement sustainable corrective actions.</p></li><li><p>Ensure proper management of system backups, documentation, and cybersecurity controls.</p></li></ul><p><strong>Operational Excellence</strong></p><ul><li><p>Identify opportunities for process improvement, automation enhancement, and cost optimization.</p></li><li><p>Utilize data analytics and operational performance indicators to drive continuous improvement initiatives.</p></li><li><p>Support reliability engineering programs and plant performance enhancement projects.</p></li><li><p>Ensure adherence to safety, quality, and environmental standards.</p></li></ul><p><strong>Leadership &amp; Stakeholder Management</strong></p><ul><li><p>Lead and mentor engineering and maintenance teams.</p></li><li><p>Collaborate closely with production, maintenance, procurement, and project management teams.</p></li><li><p>Provide technical guidance and training on automation systems and best practices.</p></li><li><p>Drive a culture of innovation, accountability, and operational excellence.</p></li></ul><p><strong>Required Qualifications</strong></p><ul><li><p>Bachelor's Degree in Instrumentation Engineering, Electronics Engineering, Electrical Engineering, or a related discipline.</p></li><li><p>MBA/PGDM or equivalent management qualification will be an advantage.</p></li><li><p>15+ years of experience in industrial automation, instrumentation, process control, and project engineering.</p></li><li><p>Proven experience in large manufacturing environments such as Cement, Metals, Mining, Power, Chemical, or Process Industries.</p></li></ul><p><strong>Technical Competencies</strong></p><ul><li><p>PLC Platforms: Allen-Bradley, Siemens, Schneider Electric or equivalent.</p></li><li><p>SCADA/DCS Systems and Industrial Communication Protocols.</p></li><li><p>Instrumentation systems including transmitters, analyzers, control valves, weigh feeders, and field devices.</p></li><li><p>SAP PM, maintenance planning systems, and asset management tools.</p></li><li><p>Process control optimization and advanced automation technologies.</p></li><li><p>Strong understanding of industrial safety standards and engineering best practices.</p></li></ul><p><strong>Key Skills</strong></p><ul><li><p>Automation Strategy &amp; System Integration</p></li><li><p>Capital Project Management</p></li><li><p>Process Optimization</p></li><li><p>Reliability &amp; Maintenance Engineering</p></li><li><p>Vendor &amp; Contractor Management</p></li><li><p>Budgeting &amp; Cost Control</p></li><li><p>Problem Solving &amp; Root Cause Analysis</p></li><li><p>Team Leadership &amp; Cross-functional Collaboration</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Manufacturing, Cement, Building Materials, Mining, Heavy Engineering, Power Generation, Chemical Processing, or similar process industries. Experience 10–22 Years </p><p></p></section>

<ul><li>Oversee daily construction activities, ensuring adherence to project plans and specifications while managing on-site teams effectively.</li><li>Conduct regular inspections of work sites to maintain quality standards and ensure compliance with safety regulations and building codes.</li><li>Collaborate with architects and engineers to resolve design issues, ensuring that all modifications are documented and executed accurately.</li><li>Prepare and maintain detailed daily reports on project progress, including labor, materials used, and any discrepancies encountered.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Civil Engineering or a related field, providing a solid foundation in engineering principles and practices.</p></li><li><p>A minimum of 5 years of relevant site engineering experience, demonstrating a track record of on-site project management and execution.</p></li><li><p>Possession of a valid engineering license or certification, such as Chartered Engineer (CEng) or Professional Engineer (PE), showcasing professional credibility.</p></li><li><p>Proven experience in construction management software (e.g., AutoCAD, Primavera, or MS Project), enhancing planning and execution capabilities.</p></li></ul>