وظائف فني انتاج في الإمارات

General Production Technician / Follow Spot Operator Crazy Horse Paris: The Dubai Edition Department: Technical / Production Reports to: Technical Manager / Assistant Technical Manager Location: Jumeirah Zabeel Saray, Palm Jumeirah, Dubai Role Overview The General Technician / Follow Spot Operator is a multi-skilled technical position responsible for the precise operation of the follow spot during all performances, while also supporting the wider technical team across stage, lighting, AV, props, and general show operations. As a resident theatrical production where lighting, movement, music, and choreography must work in exact synchronization, the role requires exceptional concentration, timing, consistency, and awareness of performer movement. The successful candidate must be able to execute follow spot cues accurately night after night while also serving as a versatile technician capable of supporting multiple technical disciplines. Key Responsibilities Operate the follow spot during all assigned performances, accurately tracking performers according to established cues, choreography, and artistic direction. Maintain precise timing, positioning, beam control, intensity, size, and movement throughout the performance. Learn and maintain detailed knowledge of the production, including performer entrances, choreography, blocking, lighting cues, transitions, and technical sequences. Execute follow spot cues consistently and accurately according to the approved artistic and technical standards of Crazy Horse Paris. Participate in rehearsals, technical rehearsals, cue-to-cues, and show adjustments to maintain accurate follow spot operation. Perform daily pre-show inspections, testing, setup, and positioning of follow spot equipment. Identify and report equipment faults or operational concerns before they impact a performance. Maintain and assist with preventative maintenance of follow spot equipment and associated lighting systems. Serve as a General Technician, supporting the Technical Team across stage, lighting, AV, props, and other technical requirements as needed. Assist with show presets, changeovers, resets, backstage operations, and post-show technical checks. Support the setup, operation, troubleshooting, and maintenance of general theatrical equipment. Assist Lighting Technicians with fixtures, cabling, focusing, maintenance, and other lighting requirements when needed. Assist AV, Stage, Props, and other technical departments during rehearsals, maintenance periods, special events, and operational requirements. Respond quickly to technical issues during live performances and support the Technical Manager in maintaining show continuity. Maintain a safe, organized, and performance-ready technical environment. Follow all venue safety procedures, working-at-height requirements, equipment procedures, and technical protocols. Support and guide junior technicians when required. Assist with technical requirements for private events, corporate functions, and venue activations. Technical Skills & Experience Strong experience operating professional follow spot systems in theatre, live entertainment, concerts, or resident productions. Excellent understanding of follow spot technique, including performer tracking, beam positioning, iris control, intensity, movement, and cue execution. Strong understanding of theatrical lighting and live-show operations. Experience working from show calls, cue sheets, and communication systems. Ability to memorize and anticipate performer movement and choreography. Experience with lighting fixtures, cabling, focusing, and basic troubleshooting. General knowledge of stage operations, AV, props, and backstage technical systems. Familiarity with grand MA3 or similar lighting control systems is advantageous. Experience with networked theatrical systems and show control is advantageous. Comfortable working at height where required and in accordance with venue safety procedures. Strong hands-on troubleshooting and basic equipment maintenance skills. Candidate Profile Minimum 5 years of professional technical experience within theatre, resident shows, live entertainment, concerts, or major events. Proven professional experience as a Follow Spot Operator is strongly preferred. Previous experience working on choreography-driven productions, dance shows, musicals, or large-scale theatrical productions is highly desirable. Strong concentration and ability to execute precise cues consistently across repeated performances. Excellent visual awareness, timing, coordination, and attention to detail. Able to anticipate performer movement and react immediately to unexpected changes during a live performance. Multi-skilled technical background with the flexibility to support multiple production departments. Calm and reliable under live-show pressure. Strong understanding of backstage discipline and theatrical safety. Comfortable working as part of a technical team and taking direction from Show Management and Technical Management. Flexible availability for rehearsals, evening performances, weekends, public holidays, and special events. Able to work immediately Compensation AED 9,000 per month, all-inclusive, including housing/accommodation, transportation, and any other personal living expenses in the UAE.

Job Description<br><br>Cranleigh Abu Dhabi is delighted to invite applications for an exceptional AV & Production Technician to join our school from August 2026. This is an exciting opportunity for an enthusiastic, knowledgeable, and forward-thinking educator who can inspire and contribute fully to our vibrant co-curricular programme.<br><br>This is an exciting opportunity for a highly skilled and enthusiastic technical professional to support one of the UAE's leading school performing arts and events programmes. The successful candidate will play a key role in the delivery of concerts, productions, assemblies, sporting events, parent events and wider school activities, whilst maintaining and developing the School's audio-visual, sound and lighting infrastructure.<br><br>We are seeking an individual with experience in live sound, theatrical lighting, event production and audio-visual systems. The ideal candidate will be equally comfortable supporting the day-to-day technical needs of a busy school as they are managing the sound and lighting requirements of large-scale musical productions, performances and concerts.<br><br>The closing date for applications is 5th May 2026. Applications will be reviewed on a rolling basis and the School reserves the right to make an appointment earlier should an exceptional candidate be identified.<br><br>Responsibilities<br><br>Key Responsibilities<br><br>Technical Support & AV Operations<br><br>Manage, maintain and troubleshoot the School's AV equipment, including sound, lighting, projection and recording systems. Set up, operate and strike AV equipment for assemblies, productions, performances, concerts, examinations and School events. Provide technical support to staff, students and external providers during events and performances. Support classroom and meeting room technology where required. Maintain an inventory of AV equipment and recommend replacement or upgrade requirements.<br><br><br>Performing Arts & Productions<br><br>Take lead responsibility for the operation, programming and maintenance of theatrical lighting systems, sound systems and production technology used across the School. Design, programme and operate lighting and sound for major School productions, concerts, dance shows and musical theatre performances. Support the technical requirements of large-scale productions, including those involving live orchestras, multiple performance spaces and external performers. Work alongside the Director of Performing Arts, Music and Drama teams to develop technical production plans and ensure professional standards are maintained. Manage rehearsals, technical rehearsals and performance runs from a sound, lighting and stage management perspective. Maintain all theatre, auditorium and performing arts technical equipment, ensuring operational readiness throughout the academic year. Support recording, livestreaming and multimedia requirements for performances and School events.<br><br><br>Events & Community Engagement<br><br>Provide AV support for parent events, open days, graduations, conferences and community events. Support marketing and communications teams with audio, visual and recording requirements. Assist with livestreaming, recording and broadcasting of School events where required.<br><br><br>Health & Safety<br><br>Ensure all AV and production equipment is operated safely and in accordance with relevant health and safety regulations. Conduct routine equipment inspections and report any defects. Maintain safe working practices in performance spaces, theatres and event venues.<br><br><br>General<br><br>Support the wider Operations and Performing Arts teams as required. Participate in School events outside of normal working hours where operationally required. Create and maintain technical documentation, operating procedures and equipment guides to support continuity of service. Undertake any other duties commensurate with the role as reasonably requested by the School.<br><br><br>Qualifications<br><br>Minimum Educational Qualifications Required for the Role<br><br>Diploma, Degree or Professional Qualification in Audio Visual Technology, Sound Engineering, Technical Theatre, Event Production, Media Technology or a related field. Equivalent industry experience will also be considered.<br><br><br>Minimum Years Of Experience Required<br><br>3-5 years' experience in an Audio Visual, Technical Theatre, Production, Events or Performing Arts support role.<br><br><br>Nature Of Relevant Experience Required<br><br>Experience working with professional audio-visual, sound and lighting equipment. Experience supporting live events, concerts, theatrical productions and musical performances. Experience programming and operating stage lighting systems. Strong understanding of live sound mixing, microphones and audio systems. Experience supporting productions involving multiple performers, musicians and/or live orchestras. Experience troubleshooting and maintaining AV equipment. Experience working in a school, theatre, performing arts venue or live events environment is desirable. <br><br><br>Safeguarding Satatment<br><br>Cranleigh Abu Dhabi is committed to safeguarding and promoting the welfare of children and young people. All staff and volunteers are expected to share this commitment. Appropriate safeguarding and background checks will be undertaken prior to appointment.<br><br>Please note: This job description is a fluid document and may evolve to reflect the needs of our growing school. Additional tasks reasonably deemed appropriate may be required. A full job description will be provided alongside a formal contract offer.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Perform preventive, predictive, and breakdown maintenance on flexible packaging machinery.</p></li><li><p>Dismantle, inspect, repair, refurbish, and refit mechanical equipment and machine components.</p></li><li><p>Install, align, level, and commission new production machines and equipment.</p></li><li><p>Troubleshoot and rectify mechanical failures in extrusion, printing, lamination, slitting, rewinding, pouch-making, and bag-making machines.</p></li><li><p>Carry out maintenance and repairs on <strong>extrusion lines</strong>, including extruders, dies, chill rolls, gearboxes, screw &amp; barrel assemblies, and associated equipment.</p></li><li><p>Perform <strong>plumbing works</strong>, including installation and maintenance of water, cooling, compressed air, pneumatic, hydraulic, and utility piping systems.</p></li><li><p>Repair and replace bearings, shafts, couplings, seals, pumps, valves, motors, conveyors, rollers, and gearboxes.</p></li><li><p>Read and interpret mechanical drawings, P&amp;ID diagrams, equipment manuals, and technical documentation.</p></li><li><p>Perform machine alignment, calibration, lubrication, and precision fitting.</p></li><li><p>Weld, fabricate, cut, and modify machine parts when required.</p></li><li><p>Conduct root cause analysis of recurring mechanical failures and implement corrective actions.</p></li><li><p>Coordinate with production teams to minimize downtime and maximize machine efficiency.</p></li><li><p>Maintain maintenance records, spare parts inventory, and daily work reports.</p></li><li><p>Ensure compliance with safety standards, lockout/tagout (LOTO) procedures, and company policies.</p></li><li><p>Support machine relocation, installation, dismantling, and commissioning projects.</p></li><li><p>Maintain good housekeeping standards within the workshop and production areas.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>Minimum <strong>3–5 years of experience</strong> as a Mechanical Technician in the <strong>Flexible Packaging Industry</strong>.</p></li><li><p>Strong experience in <strong>machine dismantling, reassembly, installation, and alignment</strong>.</p></li><li><p>Hands-on knowledge of <strong>extrusion machines</strong>, flexible packaging production equipment, and utility systems.</p></li><li><p>Experience in <strong>plumbing</strong>, pneumatic, hydraulic, compressed air, chilled water, and cooling systems.</p></li><li><p>Strong troubleshooting skills in mechanical, hydraulic, and pneumatic systems.</p></li><li><p>Experience in preventive and corrective maintenance.</p></li><li><p>Ability to use precision measuring instruments and mechanical tools.</p></li><li><p>Basic welding and fabrication skills are an advantage.</p></li><li><p>Ability to read engineering drawings and maintenance manuals.</p></li><li><p>Good communication and teamwork skills.</p></li><li><p>Willingness to work shifts and respond to emergency breakdowns.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Code:</strong> 287/001/469<br><strong>Industry:</strong> Paper Manufacturing<br><br>Our client in the<strong> paper manufacturing </strong>industry is seeking a skilled <strong>Mechanical Technician</strong> to perform <strong>preventive and corrective maintenance on paper production machinery and equipment. </strong>The successful candidate will be responsible for maintaining, repairing, troubleshooting, and overhauling mechanical equipment to ensure maximum plant reliability and uninterrupted production.<br>The ideal candidate will have hands-on mechanical maintenance experience within the paper manufacturing industry, with strong knowledge of paper machine components, pumps, gearboxes, bearings, pulpers, conveyors, and other production equipment.<br><br><ul><li>Perform preventive, predictive, and corrective mechanical maintenance on paper manufacturing equipment.</li><li>Inspect, troubleshoot, repair, and overhaul paper machine components to ensure efficient plant operation.</li><li>Identify and understand the complete paper machine sections, components, and their functions.</li><li>Carry out paper machine roll servicing, repair work, gearbox servicing, and roll bearing replacement.</li><li>Perform repairs and overhauling of all types of pumps, including bearing unit replacement, mechanical seal replacement, and pump overhauling.</li><li>Maintain and repair pulpers, agitators, blowers, safety valves, process valves, and associated equipment.</li><li>Perform repair and maintenance of winders and conveyor systems.</li><li>Operate lifting equipment safely to support maintenance and repair activities.</li><li>Diagnose mechanical faults and carry out timely corrective actions to minimize equipment downtime.</li><li>Ensure all maintenance activities are completed in accordance with safety procedures and company standards.</li><li>Maintain maintenance records and report equipment issues to the maintenance team.</li></ul><br><br><ul><li>Minimum<strong> 3 years</strong> of hands-on <strong>mechanical maintenance experience within the paper manufacturing industry.</strong></li><li>Strong <strong>knowledge of machinery used in paper production.</strong></li><li>Ability to understand and identify complete paper machine sections, components, and their functions.</li><li>Expertise in <strong>paper machine roll servicing and repair.</strong></li><li>Experience <strong>servicing gearboxes, replacing roll bearings, and performing mechanical overhauls.</strong></li><li>Hands-on experience repairing all types of pumps, including bearing unit replacement, mechanical seal replacement, and pump overhauling.</li><li>Experience <strong>repairing pulpers, agitators, blowers, safety valves, process valves,</strong> and related equipment.</li><li>Experience maintaining winders and conveyor systems.</li><li>Ability to safely operate lifting equipment during maintenance activities.</li><li>Ability to work effectively in a fast-paced industrial environment.</li><li>Strong troubleshooting and problem-solving skills.</li></ul><br><br><em>Please visit our </em><strong><em>jobs</em></strong><em> page to check out our current list of jobs in UAE and across the world.</em><br><em>Follow us on </em><strong><em>LinkedIn</em></strong><em> and </em><strong><em>Facebook</em></strong><em> to stay updated regarding our upcoming opportunities.</em><br><em>Subscribe to our </em><strong><em>LinkedIn newsletter</em></strong><em> for weekly job updates.</em><br> </div>

<ul><li>Operate and maintain advanced CAD/CAM milling machines and 3D printers to fabricate high-precision dental prosthetics.</li><li>Design digital restorations using specialized CAD software, meticulously translating dentist prescriptions into accurate 3D models.</li><li>Perform precise finishing, staining, and glazing techniques to achieve natural aesthetics and optimal occlusion for crowns, bridges, and implants.</li><li>Manage digital workflows, ensuring seamless integration between intraoral scans, CAD design, and CAM manufacturing processes.</li><li>Conduct quality control checks on all fabricated restorations, verifying fit, form, and function against digital models and clinical requirements.</li><li>Troubleshoot and optimize CAM milling strategies and 3D printing parameters to enhance efficiency and material utilization.</li><li>Collaborate closely with dental professionals to interpret case requirements, provide technical guidance, and resolve design challenges.</li><li>Maintain detailed records of production, material usage, and equipment maintenance for inventory and quality assurance purposes.</li><li>Stay abreast of emerging CAD/CAM technologies, materials, and techniques to continuously improve product quality and service offerings.</li><li>Ensure compliance with all relevant dental laboratory regulations and safety protocols during daily operations.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Certification from a recognized dental technician association (e.g., CDT) is a significant advantage.</li><li>Proficiency in operating and maintaining various CAD/CAM milling units and 3D printers.</li><li>Expertise in using industry-standard dental CAD software (e.g., exocad, 3Shape) for designing restorations.</li><li>Strong understanding of dental anatomy, occlusion, and restorative materials.</li><li>Excellent manual dexterity and attention to detail for precise finishing and handling of delicate components.</li><li>Effective communication and interpersonal skills for seamless collaboration with dentists and team members.</li><li>Ability to work independently, manage time effectively, and meet production deadlines in a fast-paced environment.</li><li>Basic computer literacy and familiarity with digital workflow management systems.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal Accountabilities</p><p> The Secondary Process Technician is responsible for carrying out surface preparation, coating, preservation, and packing activities for oilfield completion products in accordance with approved process specifications, customer requirements, and Quality/HSE standards. The role ensures product integrity, corrosion protection, and compliance with dimensional, coating, and cleanliness requirements, delivering defect-free products on schedule.</p><p>Job Responsibilities</p><p>A. Surface Preparation</p><ul><li><p>Perform glass bead peening, aluminium oxide blasting, and other approved blasting operations in accordance with established process parameters.</p></li><li><p>Monitor blasting media condition, nozzle performance, operating pressure, and surface profile to ensure specification compliance.</p></li><li><p>Verify surface cleanliness, profile, and readiness before coating, and apply masking where required.</p></li></ul><p>B. Coating &amp; Preservation</p><ul><li><p>Apply Xylan coating, phosphate coating, and Moly-coat in accordance with approved process specifications and required film thickness.</p></li><li><p>Carry out masking, de-masking, curing (oven operation), and preservation activities.</p></li><li><p>Perform in-process inspections, including dry film thickness (DFT), adhesion, coating coverage, and visual appearance, while maintaining accurate process records.</p></li></ul><p>C. Equipment Operation &amp; Maintenance</p><ul><li><p>Safely operate blasting equipment, spray systems, phosphate tanks, curing ovens, and packing equipment.</p></li><li><p>Perform routine cleaning and first-level preventive maintenance, reporting equipment malfunctions promptly.</p></li><li><p>Ensure the safe handling, storage, and proper use of process chemicals and consumables.</p></li></ul><p>D. Inspection &amp; Quality Control</p><ul><li><p>Conduct visual inspections to verify coating quality, surface finish, cleanliness, and product traceability.</p></li><li><p>Identify, segregate, and report non-conforming products through the Non-Conformance Report (NCR) process.</p></li><li><p>Maintain accurate product identification and traceability, including Heat Number, Work Order Number, and Serial Number.</p></li></ul><p>E. Packing, Preservation &amp; Dispatch</p><ul><li><p>Perform product cleaning, rust prevention, wrapping, preservation, packing, and labelling activities.</p></li><li><p>Prepare products for shipment in accordance with customer specifications and approved packing instructions.</p></li><li><p>Support material handling using overhead cranes, pallet jacks, and forklifts where appropriately trained and authorized.</p></li></ul><p>F. Quality, Health, Safety &amp; Compliance</p><ul><li><p>Comply with API Q1, ISO 9001, applicable work instructions, and approved process specifications.</p></li><li><p>Maintain workplace organization through effective implementation of 5S practices.</p></li><li><p>Adhere to all Health, Safety, and Environmental (HSE) requirements, including the proper use of PPE, safe handling of chemicals, and reporting of unsafe conditions.</p></li><li><p>Comply with the Company's Code of Business Conduct and ethical standards.</p></li><li><p>Support production targets, continuous improvement initiatives, and departmental Key Performance Indicators (KPIs).</p></li></ul><p>Required Competencies</p><ul><li><p>Successfully complete all mandatory training requirements as specified in the Employee Qualification and OJT Form No. S1-026F.</p></li><li><p>Demonstrated practical experience in glass bead peening, aluminium oxide blasting, Xylan coating, phosphate processing, and Moly-coat application.</p></li><li><p>Ability to interpret work instructions, verify coating quality (including DFT and coverage), and maintain accurate production records.</p></li><li><p>Knowledge of safe handling practices for coating chemicals and blasting media, with a strong commitment to PPE compliance.</p></li><li><p>Strong attention to detail, quality awareness, teamwork, and effective communication skills.</p></li><li><p>Ability to safely handle heavy components and operate lifting equipment where authorized.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualification Guide</p><p><strong>Education</strong></p><ul><li><p>ITI, Diploma, or an equivalent technical qualification.</p></li></ul><p><strong>Experience</strong></p><ul><li><p>Minimum 3–5 years of experience in industrial coating, blasting, or surface treatment operations, preferably within the oil and gas industry.</p></li></ul><p><strong>Communication</strong></p><ul><li><p>Basic working proficiency in spoken and written English.</p></li></ul><p><strong>Working Conditions</strong></p><ul><li><p>Shop-floor environment with rotational day/night shifts and overtime as required.</p></li></ul><p><strong>Key Performance Indicators (KPIs)</strong></p><ul><li><p>Coating quality and compliance.</p></li><li><p>Product rejection rate.</p></li><li><p>Production output and efficiency.</p></li><li><p>Packing accuracy.</p></li><li><p>Safety performance.</p></li><li><p>Housekeeping and 5S compliance.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Crane Technician <p>Implement Production Optimization:&nbsp;<span>To execute all scheduled (day-to-day, preventive) maintenance, corrective maintenance and major repairs of the equipment's in order to optimize production &amp; minimize Material Handling down time for maintenance related development works</span></p><br><p>Facilitate Corrective Action:&nbsp;<span></span><span>Responsible for trouble shooting during breakdowns of mechanical equipment's and provide the assistance to find out the root cause for corrective action maintenance related development works.</span></p><br><p>Prevent System Abnormalities:&nbsp;<span>Responsible for attending mechanical maintenance problems during breakdowns in the Material Handling. To communicate to superiors of any abnormalities found in the mill in order to plan &amp; rectify the same.</span></p><br> <p>Meet Engineering/ Safety Principles:&nbsp;<span>Inspection of equipment's to meet engineering principles and safety regulations in maintenance related development works.</span></p><br> <p>Assistance &amp; Support:</p><br> <p>· To assist and help the Superiors in all technical areas to ensure smooth maintenance of the Material Handling for uninterrupted production and co-ordination with other departments.</p><br> <p>Following Standards:&nbsp;<span>Follow mechanical maintenance standards for all equipment in the Material Handling.</span></p><br> <p>Observe Health, Safety and Environmental practices:&nbsp;<span>To follow all relevant safety, quality, health and environmental management policies, procedures applicable to maintenance related development.</span></p><br><p><span>Minimum Education Qualifications:&nbsp;I.T.I. in Mechanical Fitter trade</span></p><br><p><span>Professional Experience:&nbsp;3-5 years experience in Mechanical&nbsp;maintenance of Steel Plant</span></p><br><p>Knowledge, Skills and/or Abilities (attributes) required:&nbsp;<span>To perform this job successfully, an individual must be able to perform each duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required.</span></p><br> <p>· Technical knowledge of predictive &amp; preventive maintenance of EOT Crane / Jib Crane.</p><br> <p>· Knowledge &amp; Skill of Trouble Shooting of EOT Crane / Jib Crane.</p><br> <p>· Understanding of engineering drawings and Hydraulic circuits.</p><br> <p>· Works with hand tools, measuring tools, portable tools and tackles.</p><br> <p>· Fluency in spoken and written English language.</p><br><p><span><br></span></p><br> <br> <br> </div>

<ul><li><p>Handle maintenance activities for key technologies, multivac machines and auxiliary systems.</p></li><li><p>Maintain motors, pumps, bearings, conveyors, palletizers, and packaging equipment.</p></li><li><p>Troubleshoot mechanical issues and carry out corrective actions.</p></li><li><p>Monitor machine performance and improve operational efficiency.</p></li><li><p>Replace defective mechanical parts and ensure proper machine alignment and calibration.</p></li><li><p>Support production team during machine setup and changeover activities.</p></li><li><p>Maintain maintenance records and daily reports.</p></li><li><p>Follow safety procedures and company maintenance standards.</p></li><li><p>Coordinate with OEM service engineers when required</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>A minimum 3 years of experience as a maintenance technician / packaging technician. </p></li><li><p>English language proficiency - Reading, Writing, Listening & Speaking. </p></li><li><p>Proven experience working with Multivac, Messpack, Pattyn and Single wrap chocolate machines. </p></li></ul>

<ul><li><p>Perform preventive and breakdown maintenance for manufacturing machines.</p></li><li><p>Troubleshoot mechanical issues and carry out corrective actions.</p></li><li><p>Maintain motors, pumps, bearings, conveyors, palletizers, and packaging equipment.</p></li><li><p>Handle maintenance activities for key technologies, multivac machines and auxiliary systems.</p></li><li><p>Monitor machine performance and improve operational efficiency.</p></li><li><p>Replace defective mechanical parts and ensure proper machine alignment and calibration.</p></li><li><p>Support production team during machine setup and changeover activities.</p></li><li><p>Maintain maintenance records and daily reports.</p></li><li><p>Follow safety procedures and company maintenance standards.</p></li><li><p>Coordinate with OEM service engineers when required</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>3+ years of similar experience as a maintenance technician.</p></li><li><p>English language proficiency - Reading, Writing, Listening & Speaking.</p></li><li><p>Technical maintenance experience in Blow Molding Krones ErgoBloc machines. </p></li></ul>

Now Hiring: 3D Printer Operator / Technician | Dubai<br>Sky High HR Solutions is inviting applications from experienced 3D Printer Operators / Technicians to support interior fit-out, joinery, and design operations.<br>The role involves producing prototypes, scale models, mock-ups, design components, and other project-specific 3D printed items while coordinating closely with Design, Technical, Production, and Project teams.<br>Key Responsibilities:• Operate and monitor 3D printers to produce prototypes, scale models, mock-ups, and design components<br>• Prepare 3D files for printing, including slicing, orientation, scaling, and support generation<br>• Coordinate with Design, Technical, Production, and Project teams to ensure outputs meet project specifications<br>• Perform post-processing activities including support removal, cleaning, finishing, and assembly<br>• Monitor print quality and troubleshoot issues such as warping, adhesion problems, layer defects, and failed prints<br>• Carry out routine cleaning, calibration, and preventive maintenance of 3D printing equipment<br>• Manage printing materials such as filaments and resins, monitor stock levels, and minimize wastage<br>• Maintain organized records of approved 3D files, print settings, machine usage, and completed models<br>• Ensure safe operation of equipment and maintain a clean and organized printing workspace<br>• Support design and technical teams in prototype development and design evaluation<br>Requirements:• Diploma or relevant technical qualification in 3D Printing, Mechanical Engineering, Product Design, Architecture, Interior Design, or a related field<br>• 2–4 years of hands-on experience operating 3D printing equipment<br>• Good understanding of 3D printing technologies, materials, and slicing software<br>• Ability to work with 3D/CAD files, dimensions, scale, and technical drawings<br>• Experience in interior design, architecture, joinery, fit-out, furniture, or engineering environments is an advantage<br>• Strong attention to detail, troubleshooting ability, and ability to work independently

<p>We are looking for a hands-on Electrical Wiring Technician to join our team in the UAE for the assembly and wiring of lamp assemblies. The ideal candidate is detail-oriented, confident working with small wiring and components, and able to work to assembly drawings and quality standards with minimal supervision.</p><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Assemble lamp fixtures according to technical drawings and build specifications</p></li><li><p>Carry out internal wiring, termination, and connection of ballasts/drivers, sockets, and lamps</p></li><li><p>Fit and secure electrical and mechanical components (housings, reflectors, ballasts, wiring looms)</p></li><li><p>Test assembled fixtures for correct wiring, continuity, and functionality before dispatch</p></li><li><p>Identify and rectify wiring faults or assembly defects</p></li><li><p>Follow safety procedures when handling lamp components and electrical parts</p></li><li><p>Maintain consistent quality and speed across production batches</p></li></ol>

Props Technician Department: Technical / Production Reports To: Technical Manager / Show Manager Location: Dubai, UAESalary: AED 9,000 per month, all-inclusive, including accommodation/housing, transportation, and personal living expenses in the UAE. Position Overview The Props Technician is responsible for the preparation, maintenance, repair, positioning, operation, and safe handling of all theatrical props and scenic elements used within a premium resident theatrical production in Dubai. This is a hands-on backstage position requiring exceptional attention to detail, technical ability, and consistency. The Props Technician ensures that all show props are correctly prepared, positioned, operated, reset, and maintained for every rehearsal and performance. The successful candidate should have professional experience in theatre, live entertainment, resident productions, concerts, or large-scale events, with strong hands-on skills in props, carpentry, fabrication, mechanical repairs, and general stage technical operations. Key Responsibilities Show & Props Operations Prepare, inspect, preset, operate, strike, and reset theatrical props for every rehearsal and performance. Ensure all props are positioned accurately according to approved show plots, cue sequences, and production requirements. Conduct pre-show and post-show inspections of all show-critical props and scenic elements. Execute backstage prop changes and cues safely and precisely during live performances. Maintain detailed knowledge of prop movements, performer interactions, backstage traffic, and show sequences. Ensure all props are fully functional, correctly positioned, and performance-ready before each show. Respond quickly to unexpected prop or scenic issues during performances to help maintain show continuity. Maintenance, Repair & Fabrication Maintain, repair, modify, and refurbish props using appropriate carpentry, mechanical, fabrication, and finishing techniques. Diagnose failures and perform rapid repairs when technical issues arise before, between, or during performances. Carry out preventative maintenance to reduce the risk of show-critical failures. Perform basic carpentry, woodworking, mechanical repairs, assembly, painting, finishing, and cosmetic restoration. Assist with modifications or fabrication of props and scenic elements when required. Maintain tools and workshop equipment in safe and operational condition. Inventory & Organization Maintain accurate inventories of props, consumables, spare parts, tools, hardware, and maintenance materials. Monitor stock levels and communicate replacement or procurement requirements to Technical Management. Maintain organized and secure backstage prop storage and workshop areas. Ensure props are returned to their designated positions following every performance. Document damage, repairs, replacements, maintenance activities, and recurring technical issues. Production & Technical Support Coordinate closely with Stage, Automation, Lighting, AV, Wardrobe, Show Management, and other technical departments where props interact with performers or technical systems. Support technical rehearsals, cue-to-cues, production rehearsals, installations, and show changes. Assist with scenic repairs, stage equipment, and general technical requirements where required. Ensure moving, mechanical, or performer-interactive props are inspected and safe before use. Support props and scenic requirements for photoshoots, special events, corporate functions, and venue activations. Assist the wider Technical Department when operational requirements demand additional support. Safety & Operational Standards Maintain the highest standards of backstage safety, organization, and show readiness. Ensure props and scenic elements are operated and maintained according to established safety procedures. Immediately report any equipment, prop, or scenic condition that could create a safety or performance risk. Maintain clean, organized, and secure technical work areas. Follow all venue health and safety procedures, technical protocols, and reporting lines. Maintain discretion and professionalism when working around performers and backstage areas. Technical Skills The ideal candidate should have strong hands-on capability across several of the following areas:Theatrical props and scenic maintenance Carpentry and woodworking Mechanical repairs and basic engineering Fabrication and assembly Painting, finishing, and cosmetic restoration Hand and power tools Basic electrical troubleshooting Stage and backstage technical operations Preventative maintenance Reading technical drawings and fabrication plans Inventory and workshop management Basic rigging awareness Stage automation or mechanical stage systems is advantageous Qualifications & Experience Minimum 3–5 years of professional experience in props, stage technical operations, scenic workshops, theatre, resident entertainment, or live events. Previous experience within a professional theatre or resident production is strongly preferred. Strong hands-on fabrication, repair, and maintenance skills. Good understanding of backstage operations and live-show safety. Exceptional attention to detail and ability to reproduce presets and show sequences consistently. Ability to perform repairs and troubleshoot technical issues under tight time constraints. Experience working around dancers, performers, moving scenery, and stage equipment is advantageous. Ability to read technical documentation, drawings, and show plots. Strong organizational and problem-solving skills. Ability to work independently while collaborating effectively with the wider Technical Department. Flexible availability for rehearsals, evening performances, weekends, public holidays, and special events. Must be available to join immediately in Dubai. Compensation AED 9,000 per month, all-inclusive. The salary is inclusive of the employee's accommodation/housing, transportation, and personal living expenses in the UAE. The employee is responsible for arranging and covering these expenses from the all-inclusive monthly salary.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Senior Hydraulics Technician <p>Senior Hydraulics Technician </p><br> <p>JOB DETAIL </p><br> <p>Department </p><br> <p>MM&amp;W </p><br> <p>Shift Scheduling </p><br> <p>No </p><br> <p>General Summary </p><br> <p>Perform the maintenance activities of Fluids &amp; Hydraulics area in order to achieve the </p><br> <p>assigned targets such as minimize plant down time and increase the related plant </p><br> <p>availability &amp; consumption of spares with cost consciousness. </p><br> <p>Essential Duties and Responsibilities </p><br> <p>Optimize Production: </p><br> <p>· To execute all scheduled (day-to-day, preventive) maintenance, </p><br> <p>corrective maintenance and major repairs of the equipments in order </p><br> <p>to optimize production &amp; minimize plant down time for fluids &amp; hydraulics related </p><br> <p>development works. </p><br> <p>Prompt Trouble Shooting: </p><br> <p>· Responsible for trouble shooting during breakdowns of hydraulics equipments and </p><br> <p>provide the assistance to find out the root cause for corrective action fluids &amp; hydraulics </p><br> <p>related development works. </p><br> <p>Providing Solutions: </p><br> <p>· Responsible for attending hydraulics related development problems during </p><br> <p>breakdowns in the Plant. To communicate to superiors of any abnormalities found in the </p><br> <p>fluids and hydraulics in order to plan &amp; rectify the same. </p><br> <p>Essential Duties and Responsibilities(Contd) </p><br> <p>Audit and Investigation: </p><br> <p>· Inspection of hydraulics equipments to meet engineering principles and safety </p><br> <p>regulations in fluids &amp; hydraulics related development works. </p><br> <p>Maintenance Support: </p><br> <p>· To assist and help for smooth uninterrupted production and coordination with other </p><br> <p>departments, the Supervisor, Fluids &amp; Hydraulics in all technical areas to ensure </p><br> <p>smooth maintenance of the Fluids &amp; Hydraulics area. </p><br> <p>Implementing Standards: </p><br> <p>· Follow maintenance standards for all hydraulics equipment in the fluids &amp; hydraulics </p><br> <p>related development works to ensure machine safety and to avoid accidents and </p><br> <p>hazards. </p><br> <p>Policies and Procedures Management: </p><br> <p>· To follow all relevant safety, quality, health and environmental management policies, </p><br> <p>procedures applicable to fluids &amp; hydraulics related development. </p><br> <p>Supervision: </p><br> <p>· To lead a group of Technician / Fitter (instruction and guidance to Technician / Fitter) </p><br> <p>and participate in fluids &amp; hydraulics related development works. </p><br> <p>Additional Duties and Responsibilities </p><br> <p>Knowledge, Skills and/or Abilities required </p><br> <p>To perform this job successfully, an individual must be able to perform each duty </p><br> <p>satisfactorily. The requirements listed below are representative of the knowledge, skills, </p><br> <p>and abilities required. </p><br> <p>· Strong problem-solving skills </p><br> <p>· Ability to handle multiple, diverse and changing responsibilities and following complex </p><br> <p>instructions </p><br> <p>· Strong interpersonal skills </p><br> <p>· Detail oriented, organized and self-motivated with ability to work independently </p><br> <p>· Communication- Report writing and verbal English and Arabic </p><br> <p>Minimum Education Qualification (Education Degree) </p><br> <p>Technical School </p><br> <p>Any preferred professional training </p><br> <p>· Suppliers Training (Fluids &amp; Hydraulics OEM) </p><br> <p>· Technical knowledge of predictive &amp; preventive maintenance of Fluids &amp; hydraulics </p><br> <p>areas. · Knowledge &amp; Skill of Trouble Shooting of Fluids &amp; hydraulic areas. </p><br> <p>· Understanding of engineering drawings and Hydraulic circuits. </p><br> <p>Professional Experience (Must haves) </p><br> <p>· 7-8 years experience in Fluids &amp; Hydraulics area of Steel Plant as a Sr. Technician / </p><br> <p>Mechanic </p><br> <p>· 5 Years as a Technician/ Fitter in a Steel Plant </p><br> <p>Previous Experience/exposure Recommendations </p><br> <p>Key Performance Indicators </p><br> <p>· Ensure Health, Safety and Environment' with Zero accidents incurred by personnel. </p><br> <p>· Optimization and minimum of cost for equipment repairs, maintenance and </p><br> <p>downtime. </p><br> <p>· Ensure availability of plant through scheduling and preparing' plant and fluid and </p><br> <p>hydraulics related </p><br> <p>equipment's. </p><br> <p>· Initiate corrective action for prompt clarification, resolutions and results of problems. </p><br> <p>· Rectification of reviewed equipment' with smooth transition and production. </p><br> <p>Behavioral Competencies </p><br> <p>Commitment to Health &amp; Safety </p><br> <p>Commitment to Result &amp; Quality (Employees) </p><br> <p>Effective Communication (Employees) </p><br> <p>Support &amp; Cooperation </p><br> <p>Teamwork &amp; Collaboration </p><br> <p>Technical Competencies </p><br> <p>Working Condition Requirement </p><br> <p>Noise Level Mid </p><br> <p>Dust Level Mid </p><br> <p>Humidity Level Mid </p><br> <p>Working in heights Mid </p><br> <p>Exposure to sun Mid </p><br> <p>Exposure to light Mid </p><br> <p>Exposure to Chemicals Mid </p><br> <p>Dirt Mid </p><br> <p>Oil &amp; Grease Mid </p><br> <p>Concussion Mid </p><br> <p>Lack of light Mid </p><br> <p>Risk of Cold Mid </p><br> <p>Risk of Accident Mid </p><br> <p>Hindering Safety Gear Mid</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Have you ever imagined to be part of one of the biggest food companies in the world?</p><br> <p>Nourish life is our commitment. This is not limited to food production – it extends to projects, initiatives and causes we embrace. In order to deliver quality products, we have a team dedicated to innovating every day. We have more than 90,000 employees worldwide. A large team that has a global vision, without leaving aside the local needs.</p><br> <p>Each member of our team is important to make BRF one of the largest food companies in the world. We are guided by values that serve as a compass for our work. Ethics in all actions, transparency in our value chain and innovation are non-negotiable points for us.</p><br> <p>Come and join us to be part of this food giant!</p><br> <p>BRF values and promotes an inclusive and diverse culture. We consider persons with disabilities for all our opportunities.</p><br> <p>#WeareBRF</p><br> <b>Job Description</b> <br><p>Responsible for all Mechanical breakdowns in his area of responsibility.<br> Check equipment and maintain to basic condition<br> Ensure Mechanical operations, standards and controls are maintained at high quality.<br> Adhere to Corrective, Preventive, Scheduled Maintenance and Kanban system,<br> Comply with safety guidelines and procedures. (HSE).<br> Co-ordinate with Maintenance team for all continuous improvement activities.<br> Ensure proper handling of chemical products.<br> Comply with all HSE and food safety HACCP requirements and pre-requirements within the workplace.<br> Comply with all Health, Safety and Environment (HSE) requirements within the workplace.<br> Ensure GMP and 5S compliance within the workplace.<br> Comply with Good Manufacturing Process and Food Defense requirements, and other applicable procedure related to the scope of the job.<br> Reduce the mean time of repair (MTTR) in the lines, through effective presence in the line.<br> Analyze and report any anomalies, complete notifications M1, M2 and M3 in the PM system and confirm orders<br> &nbsp;</p><br> <br><br>Education <br>Bachelor Degree in Mechanical Engineering<br>Junior College<br><br><br><b>Experience</b> <br><p>Technical Skills<br> 3 years’ experience of maintenance in food industry, preferably in food processing equipment’s<br> Experience in Forming machine, printers, check weigher, mixer, grinders, Multihead check weigher, freezers, emulsifiers, flow pack machines, cartooning machines, material handling machines, peeling machines, thermoforming machines<br> Hability in hydraulic system, pneumatic system, conveyors, drives, welding, lathe etc.<br> Skills about corrective maintenance, Predictive maintenance and preventive maintenance, etc.<br> Electromechanical technician, will be an advantage.</p><br> <p>Key Attributes<br> Bachelor’s Degree or Diploma in Maintenance<br> English: Business proficiency&nbsp;<br> Knowledge of SAP<br> Microsoft - word, excel and Power point<br> Understanding of analytical tools PDCA, RCA, 5s</p><br> <br><br><br><p>Stay tuned on our Website to be aware about all the job opportunities we have!</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Lab Technician</b> in <b>Abu Dhabi, UAE</b>. Our client is a reputed organization in the Construction / Precast Concrete sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Perform laboratory testing on concrete and precast materials.<br></li><li>Conduct compressive strength and quality control tests.<br></li><li>Prepare and maintain concrete mix samples for testing.<br></li><li>Calibrate and maintain laboratory equipment.<br></li><li>Record, analyse, and document laboratory test results.<br></li><li>Ensure compliance with laboratory safety and quality standards.<br></li><li>Coordinate with production and quality teams.<br></li><li>Report test findings accurately to supervisors.<br></li></ul>Required Skills<br><ul><li>Concrete laboratory testing and analysis.<br></li><li>Precast concrete quality control procedures.<br></li><li>Laboratory equipment operation and maintenance.<br></li><li>Concrete mix design and testing knowledge.<br></li><li>Documentation and reporting of test results.<br></li></ul>Preferred Skills<br><ul><li>Knowledge of ASTM/BS/EN testing standards.<br></li><li>Experience in GCC construction projects.<br></li><li>Computer proficiency for laboratory reporting.<br></li></ul>Work Experience Requirements<br><p>Candidates must possess a minimum of <b>3 years of hands-on experience</b> in a Concrete or Precast Laboratory as a Lab Technician. Experience in construction materials testing and quality assurance is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma or Bachelor's Degree in Civil Engineering or related field <i>(typical)</i><br></li><li><b>Preferred:</b> Bachelor's Degree in Civil Engineering<br></li><li><b>Additional:</b> Material Testing or Quality Control certifications <i>(typical)</i><br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Lab Technician</b> in <b>Abu Dhabi, UAE</b>. Our client is a reputed organization in the Construction / Precast Concrete sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Perform laboratory testing on concrete and precast materials.<br></li><li>Conduct compressive strength and quality control tests.<br></li><li>Prepare and maintain concrete mix samples for testing.<br></li><li>Calibrate and maintain laboratory equipment.<br></li><li>Record, analyse, and document laboratory test results.<br></li><li>Ensure compliance with laboratory safety and quality standards.<br></li><li>Coordinate with production and quality teams.<br></li><li>Report test findings accurately to supervisors.<br></li></ul>Required Skills<br><ul><li>Concrete laboratory testing and analysis.<br></li><li>Precast concrete quality control procedures.<br></li><li>Laboratory equipment operation and maintenance.<br></li><li>Concrete mix design and testing knowledge.<br></li><li>Documentation and reporting of test results.<br></li></ul>Preferred Skills<br><ul><li>Knowledge of ASTM/BS/EN testing standards.<br></li><li>Experience in GCC construction projects.<br></li><li>Computer proficiency for laboratory reporting.<br></li></ul>Work Experience Requirements<br><p>Candidates must possess a minimum of <b>3 years of hands-on experience</b> in a Concrete or Precast Laboratory as a Lab Technician. Experience in construction materials testing and quality assurance is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma or Bachelor's Degree in Civil Engineering or related field <i>(typical)</i><br></li><li><b>Preferred:</b> Bachelor's Degree in Civil Engineering<br></li><li><b>Additional:</b> Material Testing or Quality Control certifications <i>(typical)</i><br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical & sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>QUALIFICATIONS & SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation & dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary <br></span><p>Electrical Technician is responsible for execution of Preventive &amp; Break down Maintenance &amp; Ensures to comply with all the safety &amp; quality norms of the Food Industry.</p><br><br><br>Roles &amp; Responsibilities <br><p>To ensure preventive maintenance planning &amp; execution<br>Execution of breakdown maintenance.&nbsp;<br>Execution of condition monitoring maintenance.<br>Trouble shooting of Electrical issues related to Control panels, electrical panel,etc<br>Proficiency in electrical and control drawing reading to manage the trouble shooting<br>Trouble shooting and Maintenance of Pneumatic and electrical actuators<br>Trouble shooting and Maintenance in various sensors and feed back controls like speed monitors, limit switches, capacitive sensors, inductive sensors, reed switches, etc<br>Trouble shooting and maintenance in electrical panels, Motors, VFD drives, HMI, controllers, etc<br>Monitoring and handling LV panel works<br>Monitoring of the spare parts requirement &amp; timely communication of the stock status.&nbsp;<br>Check equipment and operating systems and correct wherever necessary.<br>Ensure electrical operations, standards and controls are maintained at high quality.<br>Ensure Substation maintenance of the plant&nbsp;<br>Show expertise in working with team and independently<br>Use of hand tools like power tools and testing equipment frequently.&nbsp;<br>Trouble shoot &amp; do the required repair work within defined timelines.<br>Ensure RM &amp; FG safety as per safety rules and procedures<br>Execute the required Modifications to improve the reliability of equipment.<br>Maintaining the quality &amp; safety standards without deviation.<br>Maintaining GMP &amp; Hygiene In Work Area<br>Any other work responsibility assigned by Line Manager as and when required upon business requirement (with relevant Training)</p><br><br><br>KPIs <br><p>Production related equipment availability<br>Preventive maintenance compliance percentage&nbsp;<br>Safety Compliance<br>Maintenance effectiveness &nbsp;</p><br><br><br>Work Experience Requirement <br><p>Min 8 Years’ experience as &nbsp;Electrical technician preferably in flour mill or manufacturing industry with exposure to SCADA , control panels , PLC , automated packing machines and other machines in a Manufacturing / FMCG Industry</p><br><br><br>Qualification <br><p>ITI / Diploma in Electrical / Electronics</p><br><br><br>Competencies <br><br><br> </div>

<ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical & sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>QUALIFICATIONS & SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation & dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>QUALIFICATIONS &amp; SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul><p></p></section>