وظائف KOREAN TECHNO INSPECTION MIDDLE EAST Co. LLC

<p>Job Summary</p><p>We are looking for an experienced <strong>Painting & Coating Inspector</strong> to join our onshore site-based project in Abu Dhabi. The successful candidate will be responsible for inspecting and monitoring painting and coating activities to ensure compliance with project specifications, approved procedures, international standards, and client requirements.<br></p><p><strong>Key Responsibilities</strong></p><ul><li><p>Conduct inspection of <strong>surface preparation, blasting, painting and coating activities</strong> at site.</p></li><li><p>Verify surface cleanliness, surface profile, environmental conditions and coating application parameters.</p></li><li><p>Inspect coating materials, batch numbers, shelf life, mixing ratios and application procedures.</p></li><li><p>Monitor and witness coating application in accordance with approved <strong>ITPs, procedures and project specifications</strong>.</p></li><li><p>Perform and verify <strong>DFT (Dry Film Thickness)</strong> measurements and other applicable coating inspection tests.</p></li><li><p>Inspect coating systems for defects such as pinholes, runs, sags, holidays, cracking, blistering and poor adhesion.</p></li><li><p>Witness and review applicable <strong>holiday testing, adhesion testing and other coating-related tests</strong>.</p></li><li><p>Ensure proper calibration and validity of coating inspection equipment.</p></li><li><p>Review relevant <strong>MTCs, technical datasheets, MSDS, inspection reports and coating records</strong>.</p></li><li><p>Raise and follow up on <strong>NCRs, observations and corrective actions</strong> related to coating activities.</p></li><li><p>Ensure compliance with applicable international standards, project specifications and client requirements.</p></li><li><p>Prepare daily inspection reports, coating inspection records and relevant documentation.</p></li><li><p>Coordinate with QA/QC, construction teams, contractors and client representatives.</p></li><li><p>Ensure all inspection activities are properly documented and traceable.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum <strong>8 years of inspection experience</strong> in the <strong>Oil & Gas, Petrochemical, Refinery or related industries</strong>.</p></li><li><p>Valid <strong>BGAS Grade 2, NACE Level II or equivalent internationally recognized coating inspection certification</strong>.</p></li><li><p>Certification should have been obtained <strong>at least 3 years ago</strong>, with current validity/renewal status.</p></li><li><p>Strong knowledge of <strong>surface preparation, abrasive blasting, protective coating systems and painting inspection</strong>.</p></li><li><p>Good understanding of applicable coating standards, specifications, ITPs and inspection procedures.</p></li><li><p><strong>ADNOC project/site experience is highly preferred.</strong></p></li><li><p>Previous experience working on <strong>site-based Oil & Gas projects</strong> is required.</p></li><li><p>Good communication, reporting and coordination skills.</p></li><li><p>Ability to work independently in a demanding site environment.</p></li><li><p><strong>Immediately available candidates are strongly preferred.</strong><br></p></li></ul><p><strong>Preferred Experience</strong></p><ul><li><p>Previous experience on <strong>ADNOC projects or ADNOC-approved sites</strong>.</p></li><li><p>Experience with major Oil & Gas, refinery and petrochemical projects in the UAE/GCC.</p></li><li><p>Familiarity with client inspection procedures and documentation requirements.</p></li><li><p>UAE/GCC site experience will be an added advantage.</p></li></ul>

<br><p>We are looking for an experienced <strong>PCN Multi Technician</strong> to join our site-based team in Abu Dhabi. The successful candidate will be responsible for carrying out advanced NDT and inspection activities, including UT weld scanning, PMI, hardness testing and ferrite testing, while ensuring accurate reporting and compliance with project and client requirements.<br></p><p>Key Responsibilities</p><ul><li><p>Perform <strong>Ultrasonic Testing (UT) weld scanning</strong> in accordance with approved procedures and applicable standards.</p></li><li><p>Conduct UT examinations using appropriate techniques and equipment.</p></li><li><p>Carry out <strong>Positive Material Identification (PMI)</strong> testing and verify material composition against project requirements.</p></li><li><p>Perform <strong>Hardness Testing</strong> on welds, base materials and other applicable components.</p></li><li><p>Conduct <strong>Ferrite Testing</strong> on welds and stainless/alloy materials as required.</p></li><li><p>Verify equipment calibration and ensure inspection equipment is fit for use.</p></li><li><p>Interpret and evaluate inspection results in accordance with approved procedures and applicable codes/standards.</p></li><li><p>Maintain accurate inspection records and ensure full traceability of inspection results.</p></li><li><p>Prepare clear and comprehensive <strong>inspection reports, test reports and documentation</strong>.</p></li><li><p>Identify and report any non-conformities or discrepancies to the responsible QA/QC or inspection personnel.</p></li><li><p>Coordinate with client representatives, QA/QC teams, construction teams and other inspection personnel.</p></li><li><p>Follow all applicable <strong>HSE requirements, company procedures and client specifications</strong>.</p></li><li><p>Ensure all NDT activities are performed in accordance with approved procedures and relevant certification requirements.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>PCN Level II certification in UT – 3.1 to 3.9</strong> is mandatory.</p></li><li><p><strong>ASNT Level II certification</strong> is mandatory.</p></li><li><p>Minimum <strong>8 years of relevant NDT/inspection experience</strong> in Oil & Gas, Petrochemical, Refinery or related industries.</p></li><li><p>Minimum <strong>4+ years of post-certification experience</strong> after obtaining the required PCN qualification.</p></li><li><p>Proven hands-on experience in:</p><ul><li><p><strong>UT Weld Scanning</strong></p></li><li><p><strong>Positive Material Identification (PMI)</strong></p></li><li><p><strong>Hardness Testing</strong></p></li><li><p><strong>Ferrite Testing</strong></p></li></ul></li><li><p>Strong knowledge of <strong>inspection reporting and documentation</strong>.</p></li><li><p>Good understanding of applicable NDT procedures, codes, standards and client specifications.</p></li><li><p>Ability to work independently in a site-based environment.<br></p></li></ul><p><strong>Preferred Skills</strong></p><ul><li><p>Oil & Gas / Petrochemical / Refinery project experience.</p></li><li><p>UAE/GCC site experience will be an advantage.</p></li><li><p>Experience working with major Oil & Gas operators or EPC contractors.</p></li><li><p>Good communication and coordination skills.</p></li><li><p>Strong attention to detail and commitment to inspection quality.<br></p></li></ul><p><strong>Availability</strong></p><p><strong>Immediate availability is preferred.</strong></p>

<p>We are looking for an experienced TPI Piping Inspector – GRE/GRP & HDPE to perform vendor/source inspections of GRE/GRP and HDPE piping systems, fittings, components, and related manufacturing activities. The successful candidate will be responsible for verifying that materials, manufacturing processes, workmanship, testing, and documentation comply with approved project specifications, drawings, Inspection & Test Plans (ITPs), applicable international standards, and client requirements. The role requires strong practical knowledge of GRE/GRP piping systems, HDPE piping, joining/lamination processes, inspection methods, testing, and vendor quality documentation.<br><br><br>Key Responsibilities</p><ul><li><p>Conduct <strong>source/vendor inspections</strong> of GRE/GRP piping, fittings, flanges, and associated components.</p></li><li><p>Inspect <strong>HDPE piping and fittings</strong> during manufacturing, fabrication, assembly, and installation activities.</p></li><li><p>Review and verify vendor manufacturing activities against approved <strong>ITPs, Quality Plans, procedures, drawings, and project specifications</strong>.</p></li><li><p>Verify <strong>material identification, traceability, dimensions, wall thickness, appearance, and workmanship</strong>.</p></li><li><p>Inspect GRE/GRP <strong>lamination, bonding, adhesive joints, butt joints, flange joints, and other joining methods</strong> as applicable.</p></li><li><p>Inspect HDPE <strong>butt fusion, electrofusion, joint preparation, alignment, heating parameters, fusion bead formation, and workmanship</strong>.</p></li><li><p>Witness and verify <strong>hydrostatic, pressure, leak, and other specified tests</strong> in accordance with approved procedures.</p></li><li><p>Perform <strong>visual and dimensional inspections</strong> and verify compliance with approved drawings and specifications.</p></li><li><p>Review manufacturers' <strong>Material Test Certificates (MTCs), certificates of conformity, test reports, calibration certificates, batch/lot records, and quality documentation</strong>.</p></li><li><p>Verify that inspection and testing activities are performed in accordance with the approved <strong>ITP and applicable inspection hold/witness points</strong>.</p></li><li><p>Review manufacturing and inspection records and ensure proper <strong>material and product traceability</strong>.</p></li><li><p>Identify and report <strong>non-conformities, defects, deviations, and quality issues</strong>.</p></li><li><p>Verify implementation and close-out of <strong>corrective and preventive actions</strong> before final acceptance.</p></li><li><p>Prepare clear and accurate <strong>Inspection Reports, Release Notes, NCR observations, punch lists, and other required TPI documentation</strong>.</p></li><li><p>Coordinate with <strong>clients, EPC contractors, vendors, manufacturers, and project teams</strong> during inspection activities.</p></li><li><p>Attend <strong>pre-inspection meetings, kick-off meetings, technical discussions, and final inspection activities</strong> when required.</p></li><li><p>Ensure all inspection activities are conducted in accordance with <strong>client requirements, project specifications, approved procedures, and applicable codes and standards</strong>.</p></li><li><p>Provide timely feedback to the TPI coordination/project team regarding inspection status, findings, and pending actions.<br><br>Candidates should have good working knowledge of applicable standards and specifications related to <strong>GRE/GRP and HDPE piping systems</strong>, including, where applicable:</p><ul><li><p><strong>ISO 14692 – Petroleum and natural gas industries – GRP piping</strong></p></li><li><p><strong>ISO 4427 – PE piping systems for water supply and related applications</strong></p></li><li><p><strong>ASTM / ASME / API standards</strong> applicable to the project</p></li><li><p>Project-specific <strong>GRE/GRP and HDPE specifications</strong></p></li><li><p>Approved <strong>ITPs, Quality Plans, welding/fusion procedures, lamination procedures, and inspection procedures</strong></p></li><li><p>Hydrostatic and pressure testing requirements</p></li><li><p>Dimensional and visual inspection requirements</p></li><li><p>Material identification and traceability requirements</p></li><li><p>Vendor manufacturing and quality-control procedures</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Diploma / Bachelor's Degree in <strong>Mechanical Engineering, Piping Engineering, or a related discipline</strong>.</p></li><li><p>Minimum <strong>5–8 years of relevant inspection experience</strong> in the Oil & Gas, Petrochemical, Refinery, or EPC industry.</p></li><li><p>Strong experience in <strong>GRE/GRP piping inspection</strong> is mandatory.</p></li><li><p>Experience in <strong>HDPE piping inspection and fusion/jointing activities</strong> is highly preferred.</p></li><li><p>Previous experience in <strong>Third-Party Inspection (TPI), Vendor Inspection, Source Inspection, or Expediting/QA-QC inspection</strong> is preferred.</p></li><li><p>Experience with <strong>vendor/manufacturer inspections</strong> and review of manufacturing quality documentation.</p></li><li><p>Experience working on <strong>Oil & Gas projects in the UAE/GCC</strong> is highly preferred.</p></li><li><p>ADNOC/project experience will be an advantage.</p></li></ol>

<p>We are seeking an experienced <strong>NDT Coordinator (RTFI)</strong> to oversee radiographic testing activities, supervise NDT personnel, coordinate with clients, and ensure all inspection work is completed in accordance with project specifications, quality requirements, and safety standards. The ideal candidate will have strong RT film interpretation skills, proven site coordination experience, and the ability to manage multiple inspection teams efficiently.</p><br><ol><li><p>Coordinate and supervise daily activities at sites & radiographic testing (RT) activities at project sites.</p></li><li><p>Perform and review RT film interpretation in accordance with applicable codes, standards, and project specifications.</p></li><li><p>Allocate NDT personnel and resources to meet project schedules and operational requirements.</p></li><li><p>Coordinate inspection activities with clients, project teams, and site management.</p></li><li><p>Monitor daily productivity and prepare progress reports for management and clients.</p></li><li><p>Ensure compliance with project quality requirements, company procedures, and HSE policies.</p></li><li><p>Verify that all radiographic inspection records and documentation are complete and accurate.</p></li><li><p>Support audits, inspections, and client reviews related to NDT activities.</p></li><li><p>Identify and resolve operational issues to maintain project schedules.</p></li><li><p>Mentor and guide NDT technicians to ensure high-quality performance and continuous improvement.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li><p>PCN RTFI Certification (meeting ADNOC project requirements).</p></li><li><p>ASNT Level II (Radiographic Testing - RT).<br></p></li></ul><p>Experience</p><ul><li><p>Minimum <strong>9 years</strong> of total NDT experience.</p></li><li><p>Minimum <strong>3 years of experience after obtaining PCN RTFI certification</strong>.</p></li><li><p>Experience in RT film interpretation and radiographic inspection coordination.</p></li><li><p>Previous Gulf experience is preferred.</p></li><li><p>Experience on ADNOC projects is an advantage.<br></p></li></ul><p>Skills & Competencies</p><ul><li><p>Strong RT film interpretation capability.</p></li><li><p>Excellent knowledge of NDT codes, standards, and industry best practices.</p></li><li><p>Site supervision and workforce planning.</p></li><li><p>Client coordination and stakeholder management.</p></li><li><p>Daily reporting and productivity tracking.</p></li><li><p>Quality assurance and HSE compliance.</p></li><li><p>Good written and spoken English communication skills.</p></li><li><p>Strong organizational, leadership, and problem-solving skills.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Ensure strict compliance with <strong>radiation safety regulations and company procedures</strong></p></li><li><p>Monitor and control the safe use of <strong>radioactive sources (Ir-192, Co-60, etc.)</strong></p></li><li><p>Calculate and establish <strong>safe exclusion zones and barricading distances</strong></p></li><li><p>Conduct <strong>radiation surveys and dose rate measurements</strong> using calibrated instruments</p></li><li><p>Ensure proper handling, storage, transportation, and return of radiation sources</p></li><li><p>Maintain radiation safety records, logs, and exposure reports</p></li><li><p>Conduct <strong>toolbox talks and safety briefings</strong> for radiation work activities</p></li><li><p>Ensure compliance with <strong>ADNOC requirements and UAE regulatory authority (FANR) standards</strong></p></li><li><p>Coordinate with RT technicians, supervisors, and QA/QC teams during radiography operations</p></li><li><p>Investigate and report any radiation safety deviations or incidents</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>FANR RPO Advanced or BARC Level I certification (Mandatory)</strong> or equivalent approved radiation safety qualification</p></li></ul><p><strong>Experience</strong></p><ul><li><p>Minimum <strong>5 years of experience</strong> in Radiation Protection / Industrial Radiography safety</p></li><li><p>Experience in <strong>Oil &amp; Gas, Petrochemical, Refinery, or related industrial projects</strong></p></li><li><p><strong>GCC / ADNOC project experience preferred</strong></p></li></ul><p></p></section>