وظائف فني دوكو - دبي الإمارات

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working as part of the Quality department on the project, the Lab Technician will be working closely with the Quality Engineers / Construction Engineers / Project Quality Manager to undertake onsite Testing’s (Concrete, FDT, PLT and Etc.,), Other materials testing coordination with approved 3rd party laboratory, Follow up, Tracking, Receiving, Verification, Register and Submission of Test Reports to consultant in coordination with Project Quality Manager and MIR Preparation, Submission and Coordination with consultant for obtaining approval.</p><br><p>Undertake on-site Testing’s (FDT, PLT &amp; Others) of completed works as per requirements of approved ITPs. Undertake on-site Testing’s of Fresh concrete and Sampling works as per Project requirements of approved MSRA. Coordinate with Quality Engineers / Site Engineers / Quality Manager to plan and schedule the testing’s for completed works in advance Coordinate with Consultant Inspector for witnessing of all on-site testing’s Ensure all the Concrete cube samples are timely transported to 3rd laboratory for testing Follow-up with third party laboratory for the pending test reports Monitor Tracker for materials testing and Test Reports to ensure all reports are received Verify all the test reports received as per the project and standard requirements and register into the log Conduct material inspections, raise MIRs to Consultant, and attend inspections as required. Monitor storage of materials on-site and in storage areas to ensure that manufacturer requirements are adhered to. Prepare Test Report submittals for all test reports in coordination with Quality Manager for Consultant review and approval Addressing any failures on Test reports and Noncompliance to the Project Quality Manager</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>2- 5 Years of Experience in the field of construction</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><ul><li><p>Troubleshoot hydraulic equipment and systems.</p></li><li><p>Test equipment for proper performance and compliance with regulations.</p></li><li><p>Understanding of Documents related to Hydraulic Schematic/P&amp;ID Drawings.</p></li><li><p>Understanding of Nitrogen Kit and Pre-Charging of Piston Type Accumulators, Bladder Type Accumulators.</p></li><li><p>Conduct precise troubleshooting and repair of hydraulic components including pumps, motors, valves, cylinders.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>6+ years of experience in marine(dredging)/oil and gas industries as a hydraulic technician.</p></li><li><p>Diploma in mechanical, or hydraulic engineering, or any related technical field.</p></li><li><p>Excellent knowledge of mechanical systems and components.</p></li><li><p>Physically fit and willing to work onboard vessels or in shipyards.</p></li><li><p>Ability to read technical drawings, schematics, and service manuals.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What we offer · A clean, efficient and friendly workplace built on respect and teamwork. · Employment visa and medical insurance in compliance with UAE regulations. · Opportunities to work on prestigious luxury projects across residences, hotels, commercial spaces and yachts. · Continuous training and development in the latest home automation and AV technologies. · Career growth opportunities within a fast-growing company in the UAE. Role Description This is a full-time, on-site role based in Dubai for an Electrical Technician/Installer. The role involves installing, testing and commissioning electrical and low-voltage systems, inclusing Home Automation, Audio-Video, Lighting Control, Networking, Security Systems, low-voltage Distributional Panels. The Technician/Installer will work closely with the engineering and design teams to ensure proper installation, system reliability and client satisfaction. Responsibilities · Install and configure automation, lighting control, audio-video and network systems according technical drawings and specifications. · Perform wiring, cabling, termination and equipment mounting in residential and commercial environments. · Clean and maintain tools and equipment after use to ensure a safe and organized worksite. · Take detailed notes of any on-site changes or issues and communicate them promptly to the design and engineering teams. · Ensure all client property is protected during installation and maintain a professional, respectful presence on-site. · Follow company dress code, including wearing the AV Smart Integration uniform at all times. · Support system testing, troubleshooting and on-site commissioning. · Ensure all installations meet safety standards and quality requirements. · Collaborate with engineers, project managers and designers to deliver efficient solutions. · Follow UAE electrical codes, safety procedures and company standards at all times. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications · Diploma or technical certificate in Electrical, Electronics or related field. · Minimum 3 years of experience in electrical or low-voltage installations. · Knowledge of wiring, cabling and termination for automation, AV, network systems. · Ability to read and interpret electrical drawings and schematics. · Strong attention to detail, problem-solving skills and teamwork. · Good communication skills in English (Arabic or Hindi is a plus). · Valid UAE driver's license Preferred Qualifications · Experience with Crestron, KNX, Lutron, RTI or similar systems · Familiarity with networking basics · Experience working on luxury residential or hospitality projects</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Install, inspect, maintain, and repair air conditioning and ventilation systems.</p></li><li><p>Diagnose faults and troubleshoot AC units efficiently.</p></li><li><p>Perform preventive and corrective maintenance on HVAC systems.</p></li><li><p>Clean and replace air filters, coils, ducts, and other AC components.</p></li><li><p>Install and repair compressors, condensers, evaporators, thermostats, and refrigerant lines.</p></li><li><p>Check refrigerant levels and recharge systems when required.</p></li><li><p>Ensure all work complies with safety standards and company procedures.</p></li><li><p>Respond promptly to maintenance requests and emergency breakdowns.</p></li><li><p>Maintain accurate service records and submit work reports.</p></li><li><p>Use tools and equipment safely and keep the work area clean and organized.</p></li><li><p>Coordinate with supervisors and other technicians to complete assigned tasks on time.</p></li><li><p>Provide excellent customer service and maintain a professional attitude while working on-site.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>2 years of relevant experience</strong> as an AC Technician.</p></li><li><p>Must be <strong>currently based in the UAE</strong>.</p></li><li><p>Strong knowledge of AC installation, servicing, preventive maintenance, and troubleshooting.</p></li><li><p>Familiarity with split units, ducted AC systems, package units, VRF/VRV systems, and central air conditioning systems.</p></li><li><p>Ability to read technical drawings and follow maintenance procedures.</p></li><li><p>Good understanding of electrical and mechanical components of HVAC systems.</p></li><li><p>Knowledge of refrigerant handling and safe work practices.</p></li><li><p>Ability to work independently and as part of a team.</p></li><li><p>Good communication skills and a professional attitude.</p></li><li><p>Physically fit and willing to work at different project locations.</p></li><li><p>Immediate joiners are preferred.</p></li></ul><p>Personal Attributes</p><ul><li><p>Responsible and dependable</p></li><li><p>Detail-oriented</p></li><li><p>Strong problem-solving skills</p></li><li><p>Time-conscious and organized</p></li><li><p>Customer service focused</p></li><li><p>Committed to workplace safety and quality workmanship</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Perform preventive, predictive, and breakdown maintenance on flexible packaging machinery.</p></li><li><p>Dismantle, inspect, repair, refurbish, and refit mechanical equipment and machine components.</p></li><li><p>Install, align, level, and commission new production machines and equipment.</p></li><li><p>Troubleshoot and rectify mechanical failures in extrusion, printing, lamination, slitting, rewinding, pouch-making, and bag-making machines.</p></li><li><p>Carry out maintenance and repairs on <strong>extrusion lines</strong>, including extruders, dies, chill rolls, gearboxes, screw &amp; barrel assemblies, and associated equipment.</p></li><li><p>Perform <strong>plumbing works</strong>, including installation and maintenance of water, cooling, compressed air, pneumatic, hydraulic, and utility piping systems.</p></li><li><p>Repair and replace bearings, shafts, couplings, seals, pumps, valves, motors, conveyors, rollers, and gearboxes.</p></li><li><p>Read and interpret mechanical drawings, P&amp;ID diagrams, equipment manuals, and technical documentation.</p></li><li><p>Perform machine alignment, calibration, lubrication, and precision fitting.</p></li><li><p>Weld, fabricate, cut, and modify machine parts when required.</p></li><li><p>Conduct root cause analysis of recurring mechanical failures and implement corrective actions.</p></li><li><p>Coordinate with production teams to minimize downtime and maximize machine efficiency.</p></li><li><p>Maintain maintenance records, spare parts inventory, and daily work reports.</p></li><li><p>Ensure compliance with safety standards, lockout/tagout (LOTO) procedures, and company policies.</p></li><li><p>Support machine relocation, installation, dismantling, and commissioning projects.</p></li><li><p>Maintain good housekeeping standards within the workshop and production areas.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>Minimum <strong>3–5 years of experience</strong> as a Mechanical Technician in the <strong>Flexible Packaging Industry</strong>.</p></li><li><p>Strong experience in <strong>machine dismantling, reassembly, installation, and alignment</strong>.</p></li><li><p>Hands-on knowledge of <strong>extrusion machines</strong>, flexible packaging production equipment, and utility systems.</p></li><li><p>Experience in <strong>plumbing</strong>, pneumatic, hydraulic, compressed air, chilled water, and cooling systems.</p></li><li><p>Strong troubleshooting skills in mechanical, hydraulic, and pneumatic systems.</p></li><li><p>Experience in preventive and corrective maintenance.</p></li><li><p>Ability to use precision measuring instruments and mechanical tools.</p></li><li><p>Basic welding and fabrication skills are an advantage.</p></li><li><p>Ability to read engineering drawings and maintenance manuals.</p></li><li><p>Good communication and teamwork skills.</p></li><li><p>Willingness to work shifts and respond to emergency breakdowns.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>QUALIFICATIONS &amp; SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>QUALIFICATIONS &amp; SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimize workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>To perform a wide range of duties relating to the mechanical installation, repair and maintenance of machinery, equipment and fixtures to ensure their efficient operation at minimum downtime complying with EHS Guidelines with a focus on continuous improvement.</p><br><p><strong>KEY ACCOUNTABILITIES:</strong></p><br><ul><li><p>Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.</p></li><li><p>Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.</p></li><li><p>Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.</p></li><li><p>Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.</p></li><li><p>Performs various works related to welding and fabrication.</p></li><li><p>Mentors newly joined mechanics in order to equip them with the plant &amp; equipment knowledge necessary to carry out maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li><li><p>Inputs data into maintenance management systems for works and manning records.</p></li><li><p>Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.</p></li><li><p>Performs all the PM’S, running inspections &amp; checklists on daily basis issued as per maintenance planning requirements.</p></li><li><p>Perform other related duties as communicated by supervisor/technician.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>3 Years’ of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Good working knowledge of written and spoken English</p></li><li><p>Must be familiar with all maintenance tools with good computer skills</p></li><li><p>Exposure to installation &amp; troubleshooting</p></li><li><p>Must be able to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.Accepts direction from his supervisor verbally or in writing.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications:Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualificationMinimum Experience:Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)Craft /Trade certificate holders: 8 years’ experience in mechanical maintenanceHands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhaulsSkills:Familiar with all mechanical maintenance toolsKnowledge of PCs, Computer literacy is essentialConversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standardExcellent interpersonal skills and assertivenessTeam work (including shift work is also essential)Self-motivation &amp; dedicationWork in a Multi-Cultural environment</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.Accepts direction from his supervisor verbally or in writing.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications:Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualificationMinimum Experience:Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)Craft /Trade certificate holders: 8 years’ experience in mechanical maintenanceHands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhaulsSkills:Familiar with all mechanical maintenance toolsKnowledge of PCs, Computer literacy is essentialConversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standardExcellent interpersonal skills and assertivenessTeam work (including shift work is also essential)Self-motivation &amp; dedicationWork in a Multi-Cultural environment</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Diagnose and troubleshoot complex pump system failures, identifying root causes for critical operational equipment.</li><li>Perform precision repairs and overhauls on a wide variety of centrifugal, positive displacement, and other industrial pumps.</li><li>Conduct routine preventative maintenance, including lubrication, seal replacement, and performance testing to maximize uptime.</li><li>Interpret complex mechanical drawings, schematics, and manufacturer's manuals to guide repair and installation activities.</li><li>Utilize advanced diagnostic tools, such as vibration analyzers and infrared cameras, to assess equipment health.</li><li>Install and commission new pump systems, ensuring proper alignment, sealing, and operational parameters are met.</li><li>Maintain detailed records of all maintenance, repair, and diagnostic activities for asset management and reporting.</li><li>Adhere strictly to safety protocols and environmental regulations during all maintenance and repair operations.</li><li>Collaborate with engineering and operations teams to recommend improvements for pump efficiency and reliability.</li><li>Respond to emergency breakdowns, providing rapid and effective solutions to minimize production impact.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School Diploma or equivalent; Associate's degree in a technical field preferred.</li><li>Completion of a recognized apprenticeship program or equivalent vocational training in mechanical systems.</li><li>Possession of relevant certifications, such as Certified Maintenance &amp; Reliability Professional (CMRP) or equivalent.</li><li>Minimum 5 years of hands-on experience as a Pump Technician or Industrial Mechanic.</li><li>Proven experience in oil &amp; gas, manufacturing, water treatment, or a similar heavy industrial sector.</li><li>Proficiency in reading and interpreting technical blueprints, P&amp;IDs, and hydraulic schematics.</li><li>Strong technical skills in pump mechanics, hydraulics, seals, bearings, and motor alignment.</li><li>Excellent problem-solving abilities and a methodical approach to troubleshooting.</li><li>Ability to work independently and as part of a team, with strong communication skills.</li><li>Physical ability to lift heavy components, work in confined spaces, and operate in demanding environmental conditions.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>To perform a wide range of duties relating to the mechanical installation, repair and maintenance of machinery, equipment and fixtures to ensure their efficient operation at minimum downtime complying with EHS Guidelines with a focus on continuous improvement. KEY ACCOUNTABILITIES: Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.Performs various works related to welding and fabrication.Mentors newly joined mechanics in order to equip them with the plant &amp; equipment knowledge necessary to carry out maintenance work.Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc. Assists other departments in the repair and troubleshooting of equipment Inputs data into maintenance management systems for works and manning records. Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor . Performs all the PM’S, running inspections &amp; checklists on daily basis issued as per maintenance planning requirements. Perform other related duties as communicated by supervisor/technician.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>QUALIFICATIONS &amp; SKILLS: Minimum Qualifications: Diploma in relevant fieldCompletion of PEC Craft Training Minimum Experience: 3 Years’ of relevant experience in a heavy industry after DiplomaNo experience required after completion of PEC TrainingSkills:Good working knowledge of written and spoken EnglishMust be familiar with all maintenance tools with good computer skillsExposure to installation &amp; troubleshootingMust be able to read and understand engineering drawings/manuals/instructions</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>To perform a wide range of duties relating to the mechanical installation, repair and maintenance of machinery, equipment and fixtures to ensure their efficient operation at minimum downtime complying with EHS Guidelines with a focus on continuous improvement. KEY ACCOUNTABILITIES: Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.Performs various works related to welding and fabrication.Mentors newly joined mechanics in order to equip them with the plant &amp; equipment knowledge necessary to carry out maintenance work.Continuously works towards improving EHS and Plant &amp; Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc. Assists other departments in the repair and troubleshooting of equipment Inputs data into maintenance management systems for works and manning records. Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor . Performs all the PM’S, running inspections &amp; checklists on daily basis issued as per maintenance planning requirements. Perform other related duties as communicated by supervisor/technician.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>QUALIFICATIONS &amp; SKILLS: Minimum Qualifications: Diploma in relevant fieldCompletion of PEC Craft Training Minimum Experience: 3 Years’ of relevant experience in a heavy industry after DiplomaNo experience required after completion of PEC TrainingSkills:Good working knowledge of written and spoken EnglishMust be familiar with all maintenance tools with good computer skillsExposure to installation &amp; troubleshootingMust be able to read and understand engineering drawings/manuals/instructions</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Prepare surfaces by sanding, priming, and cleaning to ensure a flawless finish.</li><li>Select and mix paint colors according to specifications, ensuring accuracy and consistency.</li><li>Apply paint using spray guns and other tools, maintaining even coverage and minimizing runs and drips.</li><li>Inspect painted surfaces to identify imperfections, performing touch-ups as needed for quality assurance.</li><li>Maintain a clean and organized workspace, including proper storage of materials and tools.</li><li>Adhere to safety protocols and environmental regulations when handling chemicals and paint materials.</li><li>Collaborate with technicians and other team members to meet project deadlines and quality standards.</li><li>Keep detailed records of materials used and work completed for inventory and billing purposes.</li><li>Stay updated on industry trends, new techniques, and products to enhance painting skills.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Ability to work in a fast-paced environment while managing multiple projects.</li><li>Physical stamina and dexterity to perform repetitive tasks and handle heavy equipment.</li><li>Excellent communication skills for effective collaboration with team members.</li><li>Familiarity with modern painting technologies and materials, such as water-based paints.</li><li>Bilingual candidates preferred; proficiency in English is essential for safety and communication.</li><li>Proficiency in color matching and mixing, with a keen eye for aesthetics.</li><li>Strong attention to detail and a passion for delivering high-quality finishes.</li><li>Minimum of 2 years of experience in automotive painting or a related field.</li><li>Certifications in painting techniques or hazardous materials handling are highly desirable.</li><li>High school diploma or equivalent; vocational training in automotive painting is a plus.</li></ul><p></p></section>

<ul><li>Diagnose complex automotive issues using advanced diagnostic tools and techniques to ensure accurate repairs.</li><li>Perform routine maintenance tasks such as oil changes, tire rotations, and brake inspections to enhance vehicle longevity.</li><li>Utilize OEM service manuals and repair software to ensure compliance with safety standards and repair guidelines.</li><li>Replace faulty components, including engines, transmissions, and electrical systems, ensuring high-quality workmanship.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>A high school diploma or equivalent; an associate degree in automotive technology is preferred for advanced knowledge.</li><li>Certifications from recognized institutions, such as ASE, to validate expertise in specific automotive systems and repairs.</li><li>Minimum of 3 years of hands-on experience working in automotive repair shops or dealerships to ensure proficiency.</li><li>Familiarity with various vehicle brands and models, showcasing adaptability to diverse automotive technologies.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Apply paints, stains, and coatings using brushes, rollers, or spray equipment with precision and attention to detail.</li><li>Mix and match paint colors to meet specific project requirements and client preferences.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Knowledge of various paint types, their applications, and proper handling techniques.</li><li>Strong attention to detail and a commitment to delivering high-quality workmanship.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Prepare surfaces for painting by cleaning, sanding, and filling holes to ensure a smooth finish.</li><li>Mix and match paint colors to meet specific project requirements and client preferences.</li><li>Apply paints, stains, and coatings using brushes, rollers, or spray equipment with precision and attention to detail.</li><li>Inspect and touch up painted surfaces to maintain high-quality standards and client satisfaction.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent; additional vocational training in painting or related fields is a plus.</li><li>Minimum of 2-3 years of hands-on painting experience in residential or commercial settings.</li><li>Proven ability to read and interpret blueprints and technical drawings accurately.</li><li>Knowledge of various paint types, their applications, and proper handling techniques.</li></ul><p></p></section>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed.</p> <p>Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building.</p> <p>Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work.</p> <p>Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

Company Description<br><br>Join Grand Mercure Dubai City, a 5-star Accor hotel where local culture meets world-class hospitality. With 361 rooms, diverse dining venues, modern meeting facilities, and a passionate team, we are committed to creating memorable guest experiences and empowering our Heartists to grow.<br><br>Our Commitment To Diversity & Inclusion<br><br>We are an inclusive company, and our ambition is to attract, recruit and promote diverse talent.<br><br>Why work for Accor?<br><br>We are far more than a worldwide leader. We welcome you as you are, and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br><br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/<br><br>Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS<br><br>Job Description<br><br>Conform and adhere to the policies & procedures and rules & regulations laid down by the Hotel to achieve the highest levels of uniformity and guest service. To supervise the upkeep and maintenance of all carpentry-related items of the Hotel, any matter which may affect the interests of the Hotel should be brought to the attention of the Management. Establish and maintain seamless co-ordination & co-operation with all departments to ensure maximum cooperation, productivity, morale and guest service. Provide effective support to the team to enable them to deliver effective and efficient services. Respond to customer queries by resolving issues in a timely and efficient manner to ensure customer satisfaction. Motivate and develop staff to ensure the smooth functioning of the department. Ensure that the team is trained in all safety provisions. To maintain & repair door locks, door closures, safety chain, door seals, Door stoppers, Peephole etc. To maintain & repair Tables, Chairs, Storage cabinet, and adjusting and fixing of all furniture. Carry out the building PPM related to carpentry and wooden polishing as per the schedule or instructed by superior. Assist the engineering team to carry out any masonry, painting or any other work requested by the supervisors from time to time. Ensure to maintain all the equipment used in carpentry are in good and safe to use and also keep the carpentry section clean and tidy all the time. Estimate the requirement of materials & inform the Engineering Supervisor to notify the same to the Purchasing Department for any major projects or task. Perform daily assignments, field observation, schedule roster, preventive maintenance, and other operations set up for the Engineering Department inclusive of Pre & Pro tasks to eliminate and provide suitable and better-quality guest service. Check and ensure that proper safety measures have been adhered to and also ensure maintenance of all firefighting equipment. Ensure correct maintenance of all equipment in conjunction with the other user departments & stay abreast of technological advances in surveillance & safety equipment.<br><br>Qualifications<br><br>At least 2 years of progressive experience in a hotel2 plus years of Building Carpentry experience