وظائف مهندس ديكور في الإمارات

<ul><li><p>Lead and manage the complete design and engineering activities from concept and detailed design through construction support and project handover.</p></li><li><p>Develop design strategies, engineering plans, deliverable schedules, and technical execution plans in line with project requirements.</p></li><li><p>Manage multidisciplinary engineering activities covering civil, structural, architectural, MEP, electrical, mechanical, and other relevant disciplines.</p></li><li><p>Review project scope, contract documents, specifications, BOQs, drawings, and employer requirements to establish design deliverables and technical requirements.</p></li><li><p>Lead design development and ensure engineering solutions are practical, cost-effective, constructible, and aligned with project objectives.</p></li><li><p>Coordinate with clients, consultants, authorities, contractors, subcontractors, and internal project teams on all design and engineering matters.</p></li><li><p>Review and manage engineering drawings, calculations, specifications, technical reports, design submissions, and other project deliverables.</p></li><li><p>Establish design review and approval processes and ensure timely submission and closure of technical comments.</p></li><li><p>Ensure designs comply with applicable UAE regulations, authority requirements, international codes, project specifications, and contractual obligations.</p></li><li><p>Coordinate technical interfaces between different engineering disciplines and identify and resolve design clashes and discrepancies.</p></li><li><p>Work closely with BIM teams to ensure coordinated models, drawings, and engineering information are developed and maintained.</p></li><li><p>Manage design changes, technical queries, RFIs, design revisions, and engineering variations throughout the project lifecycle.</p></li><li><p>Review constructability of designs and provide technical support to construction teams during project execution.</p></li><li><p>Coordinate with procurement teams to ensure engineering specifications and technical requirements are aligned with procurement packages.</p></li><li><p>Provide technical inputs for material selection, equipment specifications, vendor drawings, and technical submittals.</p></li><li><p>Review and evaluate consultant, contractor, and vendor design submissions and ensure compliance with project requirements.</p></li><li><p>Manage technical risks and identify opportunities for value engineering, design optimization, and cost reduction.</p></li><li><p>Ensure design deliverables are issued in accordance with approved project schedules and construction requirements.</p></li><li><p>Monitor engineering progress and prepare regular design status reports, dashboards, and management updates.</p></li><li><p>Manage and mentor design and engineering teams, assign responsibilities, and monitor individual and team performance.</p></li><li><p>Coordinate technical workshops, design review meetings, constructability reviews, and interdisciplinary coordination sessions.</p></li><li><p>Support project teams in resolving technical issues, site queries, non-conformities, and design-related construction challenges.</p></li><li><p>Ensure proper document control, revision management, design records, and technical documentation throughout the project.</p></li><li><p>Coordinate preparation and review of as-built drawings, operation and maintenance documentation, and final engineering deliverables.</p></li><li><p>Drive continuous improvement, engineering best practices, standardization, and lessons learned across projects.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong leadership and multidisciplinary design-management capabilities.</p></li><li><p>Extensive knowledge of engineering design principles, construction methodologies, and project execution.</p></li><li><p>Strong understanding of civil, structural, architectural, MEP, electrical, and mechanical interfaces.</p></li><li><p>Ability to review technical drawings, calculations, specifications, and engineering documents.</p></li><li><p>Strong knowledge of design coordination, constructability, value engineering, and technical risk management.</p></li><li><p>Proficiency in BIM/design coordination processes and relevant engineering software.</p></li><li><p>Strong understanding of UAE building regulations, authority requirements, and international engineering standards.</p></li><li><p>Excellent client, consultant, contractor, and stakeholder management skills.</p></li><li><p>Strong analytical, problem-solving, decision-making, and negotiation abilities.</p></li><li><p>Excellent written and verbal communication skills.</p></li><li><p>Strong project planning, coordination, and time-management capabilities.</p></li><li><p>Ability to manage multiple design packages and engineering priorities simultaneously.</p></li></ul><p>Qualifications & Experience</p><ul><li><p>Bachelor’s degree in <strong>Civil, Mechanical, Electrical, Architectural Engineering, or a related engineering discipline</strong>.</p></li><li><p><strong>12–18 years of relevant design and engineering experience</strong>, preferably within large-scale engineering, construction, infrastructure, or EPC projects.</p></li><li><p>Minimum <strong>5 years in a design/engineering management or senior technical leadership position</strong>.</p></li><li><p>Proven experience managing multidisciplinary design teams and complex engineering deliverables.</p></li><li><p>Experience coordinating with clients, consultants, authorities, contractors, and specialist vendors.</p></li><li><p>Strong UAE/GCC experience is preferred.</p></li><li><p>Experience with Dubai and Abu Dhabi authority approvals and regulatory requirements will be an advantage.</p></li><li><p>Professional engineering registration/certification or project management qualification will be an added advantage.</p></li></ul><p>Key Performance Areas</p><ul><li><p>Timely completion and approval of design deliverables.</p></li><li><p>Design quality, technical compliance, and constructability.</p></li><li><p>Effective multidisciplinary coordination and clash resolution.</p></li><li><p>Timely closure of consultant/client/authority comments.</p></li><li><p>Design optimization and value engineering.</p></li><li><p>Effective management of engineering resources and budgets.</p></li><li><p>Technical support to construction and procurement teams.</p></li><li><p>Compliance with project specifications, contractual requirements, and UAE regulations.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<p>Location :- Abu Dhabi</p><p>Brief about company :- Sigma Engineering Works (SEW) is qualified to engineer and fabricate a full range of products based on customer specification, raising the bar in safety standards and reliable delivery. Sigma Engineering Works is an engineering service company, offering fabrication, manufacturing, service & repair, and other services to the energy industry. The company prides itself on offering a diverse and comprehensive range of products and services for the oil and gas industry that meet the highest of QHSE standards. Its services fall under machine and fabrication, blasting, painting, welding and fitting.</p><p>Sigma Engineering Works (SEW) is part of Mazrui International - Diversified holding group with wide variety of businesses in Oil & Gas/Oilfield Services, Financial Investments, Real Estate, Construction, Retail, Trading, Distribution, Logistics, Transportation, Hospitality, Education etc.</p><br><p>Designation :- Design Engineer – ASME BPVC | Oil & Gas Fabrication & Manufacturing | Pressure Vessels, Heat Exchangers, Storage Tanks & Static Equipment Reporting to :- Engineering Manager Job Objective :- To support the growth of the organization through effective project management and control, contributing to the accurate and timely completion of contracts. Assist the project management team in the preliminary execution stage of projects and ensure competitive pricing of tenders to maximize sales and the growth of SEW <strong>Key Responsibilities & Authority :-</strong></p><ul><li><p>Develop detailed designs for pressure vessels, heat exchangers, columns, skids, and packages, ensuring compliance with ASME Section VIII Divisions 1 and 2. This includes defining materials, thickness, support structures, nozzles, and more.</p></li><li><p>Perform code calculations for stress analysis, material selection, and other critical design parameters, ensuring designs adhere to the ASME Boiler and Pressure Vessel Code (BPVC).</p></li><li><p>Prepare and review technical documents, drawings, and specifications in compliance with ASME and company standards.</p></li><li><p>Design, direct, and coordinate all project-related activities, including fabrication, assembly, inspection, and testing, while ensuring alignment with contractual obligations and profit margins.</p></li><li><p>Review contract/tender documentation with the Engineering Manager, ensuring comprehensive understanding, and lead the development of project plans.</p></li><li><p>Coordinate with internal departments and sub-contractors for engineering deliverables such as design calculations, project schedules, method statements, ITPs, WPS, PQRs, and other related documents.</p></li><li><p>Prepare Material Take-Off (MTO) and Technical Data Sheets (TDS) for projects.</p></li><li><p>Represent SEW in front of clients and third-party organizations, including during ASME audits.</p></li><li><p>Liaise with clients and third parties to ensure engineering deliverables meet specifications and obtain necessary approvals.</p></li><li><p>Proactively identify project bottlenecks and implement corrective actions to ensure progress.</p></li><li><p>Prepare and manage technical queries, discuss them with the estimation team, and clarify with the client when needed.</p></li><li><p>Oversee or assist in the inspection of pressure vessels, columns, heat exchangers, and other components, ensuring they meet ASME standards.</p></li><li><p>Ensure that non-destructive testing (NDT) methods such as radiographic, ultrasonic, and hydro testing are conducted as per project requirements.</p></li><li><p>Maintain detailed records of design calculations, inspections, and project tasks, ensuring all documentation is available for audits and future reference.</p></li><li><p>Utilize specialized design and analysis tools such as PV Elite, COMPRESS, AutoCAD, SolidWorks, ANSYS, and HTRI for engineering calculations, modeling, and project management.</p></li><li><p>Engage in research and development initiatives to improve designs, reduce costs, and enhance safety and efficiency.</p></li><li><p>Participate in continuous improvement efforts related to equipment design and ASME compliance.</p></li><li><p>Act as a PRC and represent SEW in front of ASME during audits.</p></li><li><p>Ensure full compliance with ASME and other related audits, addressing any non-compliance issues promptly.</p></li><li><p>Monitor the performance of the SEW construction/installation team and participate in post-project reviews to identify learning opportunities.</p></li><li><p>Assist with project estimation, tendering, and project planning during the tender stage.</p></li><li><p>Coordinate with clients and third parties for seamless execution of deliverables.</p></li></ul><br><p><strong>Specialized Knowledge :-</strong></p><ul><li><p>In-depth knowledge of ASME Section VIII Divisions 1 and 2 for the design, fabrication, and inspection of pressure vessels, heat exchangers, columns, and skids.</p></li><li><p>Familiarity with ASME Boiler and Pressure Vessel Code (BPVC) and its applications in industrial design projects.</p></li><li><p>Proficient in ANSI, ASTM, API, BS, TEMA, AWWA, NACE, SHELL, NEMA, and other relevant industry standards for mechanical design and fabrication.</p></li><li><p>Expertise in PV Elite, COMPRESS, AutoCAD, SolidWorks, and ANSYS for performing design, stress analysis, and creating 3D models of equipment.</p></li><li><p>Proficiency in HTRI for the thermal design of heat exchangers.</p></li><li><p>Knowledge of MS Project or other planning software for managing timelines and resources.</p></li><li><p>Understanding of various NDT methods such as radiographic, ultrasonic, hydro testing, and their application in pressure vessel and component inspections.</p></li><li><p>Strong understanding of material selection and the impact of stress, temperature, and environmental conditions on materials used in pressure vessels, heat exchangers, and piping systems.</p></li><li><p>Experience in the estimation and tendering process for pressure vessels, piping systems, and skids, including material take-offs (MTO), technical data sheets (TDS), and cost estimation.</p></li><li><p>Skilled in performing mechanical stress analysis for static and dynamic loads, calculating wall thickness, reinforcement, nozzle placements, and flange ratings as per ASME standards.</p></li></ul><br><p>Ability & Skills :-</p><ul><li><p>Ability to work within specific timeframes and deliver results while ensuring project timelines, budgets, and technical requirements are met. Supports the growth of the organization through effective management and control for timely contract completion.</p></li><li><p>Proficient in performing mechanical stress analysis and design calculations for pressure vessels, heat exchangers, and other equipment. Skilled in the use of specialized software such as PV Elite, COMPRESS, AutoCAD, SolidWorks, and ANSYS.</p></li><li><p>Strong accuracy and attention to detail in preparing designs, technical documents, and reports, ensuring compliance with ASME and industry standards.</p></li><li><p>Proactively identifies and resolves bottlenecks in project progress, ensuring smooth execution and alignment with client expectations.</p></li><li><p>A good communicator, able to work with all levels of the SEW team, external groups, clients, and third parties. Supports the tendering process by offering technical advice to promote business opportunities.</p></li><li><p>A flexible and proactive member of the engineering and project management teams, adaptable to dynamic environments such as busy workshops and on-site locations.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Experience :-</strong></p><ul><li><p>Minimum of 10 years of experience in <strong>designing pressure vessels, heat exchangers, and similar equipment under ASME codes.</strong></p></li><li><p>Proficient in <strong>PV Elite, COMPRESS, AutoCAD, SolidWorks, ANSYS, and MS Office.</strong></p></li></ul><br><p><strong>Academic Qualifications :-</strong> Bachelor’s degree in <strong>Engineering/Mechanical or Petroleum.</strong></p><br><p><strong>Accountabilities and Performance Measures :-</strong></p><ul><li><p>Timely completion of tenders and projects.</p></li><li><p>Compliance with ASME standards and project requirements.</p></li><li><p>Efficient staffing, material use, and budget adherence.</p></li><li><p>Positive client feedback and precision in technical documentation.</p></li><li><p>Successful project management, implementation of improvements, and resolution of performance issues.</p></li></ul><br><p><strong><em>Please apply by attaching your CV only if you have relevant experience and qualifications.</em></strong></p><p><strong><em>Due to high volume of applications, only shortlisted candidates will be contacted.</em></strong></p>

Location: Abu Dhabi Duration: Yearly renewable contract Role: Senior individual-contributor role leading technical direction and architecture for production AI systems and backend platforms within an AI Factory.<br>Key Responsibilities:Lead AI architecture, system design, and technical strategy across teams. Design production AI systems including RAG, agents, model evaluation, inference and serving. Build/scaling backend platforms, APIs, event-driven systems, Postgre SQL, Kubernetes and Azure infrastructure. Provide hands-on technical leadership and review/write critical code. Mentor senior/staff engineers and raise engineering standards. <br>Must-Have Skills:12+ years software engineering experience at Staff/Principal level. Expert Python; working knowledge of Go/Rust/Java/Kotlin. Strong production AI/LLM, RAG, agents, evaluation and inference experience. Distributed systems and event-driven architecture (Kafka/Azure Service Bus/Event Hubs). Postgre SQL at scale, Docker & Kubernetes. Strong Azure cloud experience: AWS/GCP is a plus. Experience with AI coding agents such as Codex/Claude Code/Open Code. Strong architecture, communication, and technical leadership skills. <br>Preferred:Lang Graph/Lang Chain, v LLM/TGI/Tensor RT-LLM, vector DBs (pgvector/Qdrant/Pinecone), Redis, Elasticsearch/Open Search, AI platform engineering, security/compliance, Arabic/voice AI, and government/regulated-sector experience

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking an experienced Senior Structural Engineer to join our technical team and contribute to the successful delivery of high-rise, mixed-use, residential, commercial, and hospitality developments across the UAE.<br> The successful candidate will play a key role in structural coordination, technical review, and site support, ensuring that structural works are properly coordinated and executed in accordance with approved designs, specifications, and project requirements.<br> Private Health Insurance Performance Bonus Annual air ticket allowance Why Join IRTH Group?<br> At IRTH Group, we’re not just a company; we’re a family committed to building a brighter future together.<br> Guided by our core values of trust, strength, and agility , we empower individuals to thrive and succeed in a dynamic, collaborative environment.<br> We take pride in building great projects in prime locations, designed for future generations and offering exceptional value as an investor's product.<br> IRTH Group stands as a symbol of legacy, resilience, and vision.<br> Rooted in the foundation of a distinguished local family conglomerate, our privately held real estate investment platform draws strength from a heritage spanning over a century.<br> At IRTH Group, we are not just shaping the industry, we are setting the standard.<br> If you are driven by ambition, excellence, and the pursuit of legacy, this is where your journey begins.<br> Are you ready to be part of something extraordinary?<br> Lead and coordinate structural engineering activities across assigned projects, ensuring compliance with project requirements, design standards, and approved specifications.<br> Review, evaluate, and control structural submittals, including shop drawings, material submissions, method statements, and other technical documentation.<br> Manage and review BIM models and ensure accurate structural model coordination.<br> Participate in BIM coordination meetings and resolve clashes between structural and other disciplines.<br> Maintain model accuracy and integrity, ensuring updates accurately reflect approved design changes, site conditions, and subcontractors’ proposals.<br> Review and prepare structural calculation reports, design briefs, specifications, technical reports, and comprehensive engineering documentation.<br> Provide technical guidance and engineering support to site execution teams throughout the construction phase, addressing structural issues and ensuring proper implementation of approved designs.<br> Coordinate closely with consultant, subcontractors, and multidisciplinary teams to identify, resolve, and close structural design, technical, and coordination issues in a timely manner.<br> Support the Technical Manager in managing structural engineering deliverables and deadlines.<br> Promote effective communication between the technical office and site teams.<br> Visit construction sites when necessary to investigate structural or technical issues.<br> Qualifications Bachelor’s degree in civil engineering or Structural Engineering.<br> Master's Degree in Structural Engineering is an advantage.<br> Chartered Engineer or equivalent professional accreditation is preferred.<br> Dubai Municipality Structural Engineer License is an advantage.<br> Experience Minimum 10–15 years of structural engineering experience.<br> Minimum 5 years of UAE/GCC experience in Contracting technical team.<br> Proven experience in the technical department of execution high-rise, residential, commercial, hospitality, and mixed-use developments.<br> Technical Skills Excellent understanding of construction methodologies, buildability, and structural detailing.<br> Working knowledge of AutoCAD, Revit Structure, Navisworks, and BIM-based workflows.<br> Good knowledge of reinforced concrete and structural steel design.<br> Good Knowledge in structural analysis software such as ETABS, SAFE, SAP2000, and STAAD.<br>Pro. Working knowledge of AutoCAD, Revit Structure, Navisworks, and BIM-based workflows.<br> Thorough understanding of Dubai Municipality regulations, ACI, BS, Eurocodes, and relevant international standards.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Prepare Feasibility Study Reports, Bid, Basic and Detail Engineering deliverables for CCPP, ICE and Renewable Energy Projects, producing quality deliverables at every stage.</p></li><li><p>Prepare Design Basis, Electrical Control Philosophy, Technical Specification for Control &amp; Relay Panel, SCADA and other monitoring systems, Fault/Disturbance Recorder, Tariff Metering Panel, PLCC, Communication System, DC &amp; UPS System, DC/UPS/Control/ Communication Cable, Telecom system,etc.</p></li><li><p>Prepare SLD, Protection SLD, DC/UPS SLD, Control &amp; Protection Schematics, SCADA Architecture Diagram, Communication Network Diagram, Electrical Layout drawings.</p></li><li><p>Prepare DC/UPS/Control/ Communication Cable Schedule, Inter-connection Schedule and Drum-cutting Schedule.</p></li><li><p>Prepare Vendor Evaluation Report and Technical Bid Evaluation Report.</p></li><li><p>Responsible for the coordination and communication of power plant connecting to the power grid.</p></li><li><p>Co-ordinate with Owner / Owner’s Engineers / Vendors for timely approval of design documents.</p></li><li><p>Provide site support to resolve issues for timely completion of project within budgeted cost.</p></li><li><p>Perform cost optimization.</p></li><li><p>Calculate and select the CT ratio, and determine the CT/PT capacity.</p></li><li><p>UPS and DC system sizing.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>At least “5 years executed projects” detail design experience for CCPP, ICE project. Middle-East experience preferred.</p></li><li><p>With 220kV and above substation protection, monitoring, measurement, metering and other</p><p>electrical design experience.</p></li><li><p>Have much experience for Telecom system;</p></li><li><p>Have experience for Generator protection;</p></li><li><p>Conversant with International Code and Standards like IEC, IEEE, NFPA, NEMA, ANSI, BS, etc.</p></li><li><p>Conversant with Electrical Engineering Software like AutoCAD and PDMS.</p></li><li><p>Fluent in English Communication – both written and spoken. Should be able to communicate clearly and effectively with Owner/Vendor to sort out and resolve issues and maintain on-time delivery.</p></li><li><p>Should be a team player and communicate clearly with the project manager and other engineering disciplines for resolving interface issues and maintain on-time delivery.</p></li></ol><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking an experienced Full Stack Engineer with strong expertise in Node.<br>js, React.js, and Generative AI technologies to design and develop scalable, cloud-native web applications and intelligent automation platforms.<br> The ideal candidate will have hands-on experience in full-stack development, API integrations, cloud technologies, and implementing AI-driven solutions using Large Language Models (LLMs), Retrieval-Augmented Generation (RAG), and AI agent frameworks.<br> This role offers the opportunity to work on cutting-edge enterprise applications, AI-powered workflows, and cloud-native architectures in a highly collaborative and agile environment.<br> Key Skills &amp; Technologies: React.<br>js JavaScript TypeScript Node.<br>js Express.<br>js REST APIs MongoDB Azure Cosmos DB Generative AI Platforms: OpenAI Azure OpenAI Gemini LangChain Retrieval-Augmented Generation (RAG) AI Agents Prompt Engineering Cloud Platforms: Microsoft Azure Amazon Web Services (AWS) Docker Kubernetes CI/CD Pipelines Git Agile Methodologies Key Responsibilities: Design, develop, and maintain scalable and responsive web applications using React.<br>js and Node.<br>js. Build robust REST APIs, microservices, and backend services for enterprise-grade applications.<br> Develop and integrate Generative AI solutions, including intelligent chatbots and AI-driven automation platforms.<br> Design and implement RAG-based applications leveraging modern LLMs and vector-based retrieval techniques.<br> Build AI-powered workflows using LangChain, AI Agents, and prompt engineering techniques.<br> Integrate AI services from platforms such as OpenAI, Azure OpenAI, and Gemini into enterprise applications.<br> Deploy, manage, and monitor applications across cloud environments including Azure and AWS.<br> Containerize applications using Docker and manage deployments using Kubernetes.<br> Implement and maintain CI/CD pipelines to ensure seamless application delivery.<br> Collaborate closely with cross-functional teams, architects, and stakeholders to deliver scalable and high-quality software solutions.<br> Follow Agile development practices and contribute to continuous improvement initiatives.<br> Ensure applications are secure, performant, and aligned with enterprise standards and best practices.<br> Required Qualifications: Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.<br> Minimum 5+ years of hands-on experience in Full Stack Development.<br> Strong proficiency in React.<br>js and Node.<br>js development.<br> Solid experience with JavaScript and TypeScript.<br> Hands-on experience developing RESTful APIs and microservices using Express.<br>js. Experience working with MongoDB and Azure Cosmos DB.<br> Proven experience in building Generative AI solutions using OpenAI, Azure OpenAI, or Gemini.<br> Strong understanding of LangChain, RAG architectures, AI Agents, and Prompt Engineering.<br> Experience working with Azure or AWS cloud services.<br> Practical experience with Docker, Kubernetes, and CI/CD pipelines.<br> Proficiency in Git and Agile software development methodologies.<br> Preferred Qualifications: Experience working with Azure OpenAI Services.<br> Experience with AI automation platforms and enterprise AI integrations.<br> Exposure to cloud-native application architectures.<br> Experience building scalable enterprise applications and intelligent automation solutions.<br> Knowledge of modern AI and LLM application development best practices.<br></span> </div>

<ul><li>Develop and execute detailed test plans, ensuring comprehensive coverage of software functionalities and performance metrics.</li><li>Identify, document, and track defects using standardized procedures, facilitating effective communication with development teams.</li><li>Automate testing processes where feasible, leveraging industry-standard tools to enhance efficiency and accuracy.</li><li>Conduct thorough reviews of requirements and design specifications, providing feedback to stakeholders to mitigate potential issues early.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor’s degree in Computer Science, Engineering, or a related field, ensuring a strong foundational knowledge.</li><li>Minimum of 3 years of experience in software quality assurance, demonstrating a solid track record in diverse testing environments.</li><li>Certifications such as ISTQB or CSTE, showcasing commitment to professional development and industry standards.</li><li>Experience in Agile methodologies, enabling effective collaboration in dynamic project environments.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Engineer, OR&amp;A (Operation)<br><br><br><p><b><i>"Belong, Connect, Grow, with KBR! </i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Job Requirement</b></p><br><br><br><p>KBR is looking for a <b>Senior OR&amp;A Engineer, I&amp;C </b>with <b>Gas Processing &amp; Gas Compression</b> experience, to be based in <b>Abu Dhabi</b> for a <b>PMC project.</b></p><br><br><br><br><p><b><u>Experience required:</u></b></p><br><br><br><ul><li>Minimum Overall 15+ years of oil &amp; gas experience.</li><li>Experience in Oil &amp; Gas EPC projects.</li><li>Experience working on Gas Pipeline projects.</li><li>NGL Pipeline networks.</li><li>Experience working on multi-million-dollar projects.</li><li>Experience working on associated and non-associated sour-gas treatment projects.</li><li>Experience in Pipeline, Common Utilities and Infrastructure development in Gas Processing plants.</li><li>Experience in ADNOC Projects involving Gas Processing plants, pipelines etc.…</li><li>Must have at least 5+ Years experience working in Onshore and offshore projects.</li><li>Bachelor’s degree in engineering is a MUST.</li></ul><br><p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p><br><br><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Piping Engineer<br><br><p><b><i>"Belong, Connect, Grow, with KBR! </i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Job Requirement</b></p><br><br><br><p>KBR is looking for a <b>Senior Piping Engineer </b>with <b>Gas Processing &amp; Gas Compression</b> experience, to be based in <b>Abu Dhabi</b> for a <b>PMC project.</b></p><br><br><br><br><p><b><u>Experience required:</u></b></p><br><br><br><ul><li>Minimum Overall 15+ years of oil &amp; gas experience.</li><li>Experience in Oil &amp; Gas EPC projects.</li><li>Experience working on Gas Pipeline projects.</li><li>NGL Pipeline networks.</li><li>Experience working on multi-million-dollar projects.</li><li>Experience working on associated and non-associated sour-gas treatment projects.</li><li>Experience in Pipeline, Common Utilities and Infrastructure development in Gas Processing plants.</li><li>Experience in ADNOC Projects involving Gas Processing plants, pipelines etc.…</li><li>Must have at least 5+ Years experience working in Onshore and offshore projects.</li><li>Bachelor’s degree in engineering is a MUST.</li></ul><br><p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Specialist Project Engineer – Offshore FEED Project<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;<span>Job Title: Specialist Project Engineer – Offshore FEED Project</span></u></b></p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high‑profile offshore development in Abu Dhabi. <b>The ADNOC PMC project role would be based initially in Client Office in Abu Dhabi and FEED Office ( outside UAE).</b></p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Job Purpose</b></p><br><br><p>The Specialist Project Engineer is responsible for managing and coordinating all engineering activities during the FEED phase of offshore oil &amp; gas projects. The role ensures that project deliverables are completed in line with technical requirements, schedule, cost targets, and Client standards, while maintaining effective communication between multidisciplinary teams and stakeholders.</p><br><br><p>&nbsp;Profile matching below criteria only will be contacted.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Project Coordination &amp; Engineering Management</b></p><br><br><ul><li><b>Coordinate and oversee multi-disciplinary engineering activities during the FEED phase.</b></li><li><b>Ensure all engineering deliverables are aligned with project scope, schedule, and quality requirements.</b></li><li><b>Act as a focal point between engineering disciplines, project management, and contractors.</b></li><li><b>Support Project Manager in achieving overall project objectives.</b></li></ul><br><p><b>FEED Deliverables Management</b></p><br><br><ul><li><b>Monitor progress and quality of FEED deliverables across all disciplines (process, piping, structural, electrical, instrumentation, HSE).</b></li><li><b>Ensure deliverables meet Client standards, client specifications, and international codes.</b></li><li><b>Review key engineering documents, design philosophies, and technical reports.</b></li><li><b>Track deliverable status and ensure timely submission.</b></li></ul><br><p><b>PMC Oversight / Contractor Management</b></p><br><br><ul><li><b>Review and coordinate EPC contractor engineering activities and deliverables.</b></li><li><b>Ensure contractors comply with project requirements, timelines, and quality standards.</b></li><li><b>Participate in technical bid evaluations and vendor assessments.</b></li><li><b>Identify and resolve technical issues and interface challenges.</b></li></ul><br><p><b>Schedule, Cost &amp; Progress Monitoring</b></p><br><br><ul><li><b>Work closely with planning and project controls teams to track engineering progress.</b></li><li><b>Support schedule development, progress reporting, and milestone tracking.</b></li><li><b>Identify project risks, delays, and deviations, and propose mitigation measures.</b></li><li><b>Assist in cost monitoring related to engineering scope.</b></li></ul><br><p><b>Interface &amp; Stakeholder Management</b></p><br><br><ul><li><b>Manage interfaces between different engineering disciplines and project packages.</b></li><li><b>Coordinate with client (ADNOC Offshore), contractors, and third-party stakeholders.</b></li><li><b>Participate in design reviews, workshops, and technical meetings.</b></li><li><b>Ensure effective communication and issue resolution across all stakeholders.</b></li></ul><br><p><b>Risk &amp; Change Management</b></p><br><br><ul><li><b>Identify project risks related to engineering scope and execution.</b></li><li><b>Support HAZID, HAZOP, and constructability reviews.</b></li><li><b>Manage engineering changes and assess their impact on scope, cost, and schedule.</b></li><li><b>Ensure implementation of mitigation and corrective actions.</b></li></ul><br><p><b>HSE &amp; Quality Assurance</b></p><br><br><ul><li><b>Ensure engineering activities comply with HSE standards and project safety requirements.</b></li><li><b>Promote safe design principles and ALARP approach.</b></li><li><b>Ensure adherence to project quality procedures and QA/QC requirements.</b></li></ul><br><p><b>Documentation &amp; Reporting</b></p><br><br><ul><li><b>Prepare and review project reports, progress updates, and technical documentation.</b></li><li><b>Maintain engineering registers, action trackers, and interface logs.</b></li><li><b>Provide regular updates to Project Manager and client representatives.</b></li></ul><br><p><b>Qualifications &amp; Experience</b></p><br><br><p><b>Education</b></p><br><br><ul><li><b>Bachelor’s Degree in Engineering (Mechanical, Civil, Electrical, or equivalent)</b></li><li><b>Master’s degree is an advantage</b></li></ul><br><br><br><p><b>Experience</b></p><br><br><ul><li><b>Minimum Overall 15+ years of experience in the oil and gas sector.</b></li><li><b>Minimum 5–7 years in offshore FEED / detailed engineering projects.</b></li><li><b>Experience in WHT, subsea pipeline installation, and marine operations.</b></li><li><b>12–15+ years of experience in oil &amp; gas project engineering</b></li><li><b>Prior experience in PMC / ADNOC Offshore projects is highly preferred</b></li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><strong>Requisition Number:</strong> 24555BR<br><strong>Description:</strong><br>Stantec is looking to hire a OT Cyber Security Engineer for 6 months for various projects in Abu Dhabi.<br>- Responsible for leading Overall OT/IT cyber security for major Master Control Centre/ Water Network OT projects.<br>- Responsible for reviewing Cyber Security Plan for the project for approval from Client.<br>- Reviewing network architectures and determining if good practices are being followed (e.g., the "zones &amp; conduits" concept, proper network segmentation, use of Industrial DMZ, etc.); and providing recommendations to comply with applicable cybersecurity framework.<br>- Reviewing security products utilized (e.g., firewalls, IDS, IPS) and determining if they are configured properly.<br>- Monitor deployment of network infrastructure devices (e.g., switches, routers, etc.), security appliances (e.g., firewalls, IDS, etc.), and virtualization solutions<br>- Reviewing security policies, plans, and procedures; assessing network monitoring capabilities; analyzing system logs, security events, and packet captures to identify security threats; and providing recommendations to comply with applicable cybersecurity framework.<br>- Lead design reviews/workshops, reviewing/ recommending EPC contractor’s deliverables, Lead interfaces with various Package Vendors, prepare gap analysis against the project requirements for various control systems supplied by package vendors.<br>- Responsible for reviewing security products utilized (e.g., firewalls, IDS, IPS) and determining if the proposed configuration meets Project requirement and Industry standards.<br>- Responsible to review security policies, plans, and procedures; assessing network monitoring capabilities; analyzing system logs, security events, and packet captures to identify security threats; and providing recommendations and work with SCADA/ Control system contractor to comply with applicable cybersecurity framework.<br>- Review administrative, technical, and physical security controls proposed by SCADA/ Control system contractor and providing recommendations to mitigate the identified security risks.<br>- Participate and contribute to Cyber security workshops, vulnerability, and risk assessments with SCADA/ Control system contractor to identify security risks and threats (e.g., unsecure remote access points, suspicious remote connections, unauthorized devices on the network, etc.) and providing recommendation to remediate the identified issues, Prepare Report/Update/Maintain and coordinate with all parties to close out action points.<br>- Review/Comments contractor submitted detailed diagrams (e.g., network, cabling, server, rack, logical architecture, etc.), procedures, and plans (e.g., implementation, SAT, mitigation, etc.) as needed to support projects.<br>- Responsible to handle Technical Queries/issues from all stake holders, document review/approval of Automation &amp; Package vendors, certification requirements if any, participate in regular meetings with vendors &amp; Client<br>- Responsible to lead and participate in SCADA/ Control system contractor cyber security test at FAT locations, Responsible to accept the test and signoff reports.<br>- Responsible for coordination with client, subcontractors, other discipline engineers and Project team.<br>- Participating in cross-functional and inter-office meetings to provide design input to Engineering team.<br>- Proactively identify and mitigate technical risks during project stage.<br>- Travel to the client's site location as and when required.<br>- Support the construction, commissioning, and start-up activities, to ensure no delay.<br><strong>Qualifications:</strong><br>B.E./ Tech. in IT/OT Cybersecurity/ Electrical/ Electronics/ Instrumentation engineering with 10+ years' experience in designing, testing, installing, testing &amp; commissioning of OT cybersecurity systems in major water &amp; wastewater projects or Master Control Centre/ Data Centre projects.<br>Experience within the UAE or GCC region will be preferred.<br>Location: Abu Dhabi, UAE<br><strong>About Stantec:</strong><br>We’re active members of the communities we serve. That’s why at Stantec we always design with community in mind. We believe growing a great design company happens from the inside out. We look for people who are drawn to use every talent they possess, plus creativity, determination and a drive to do the extraordinary.<br>The Stantec community unites approximately 22,000 employees working in over 400 locations across six continents. We collaborate across disciplines and industries to bring projects to life. Our work as architects, engineers, and consultants from initial project concept and planning through design, construction and commissioning is built on a solid history of success. So, when we take on a project, we see the opportunity to make a lasting connection with the people and places where we live and work. Redefine your personal best. Join us!<br><strong>Work Location(s):United Arab Emirates-Abu Dhabi</strong><br><strong>Employment Type:</strong> <strong>Full-Time</strong><br><strong>Job Type:</strong> <strong>Regular</strong><br><strong>Job Category:</strong> <strong>Internet/WWW</strong></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for an experienced PMC Senior Piping Engineer for ADNOC Onshore in Abu Dhabi. Due to the nature of the projects and client expectation, the position will be based full time at ASAB site.</p><br> <p><strong>Our Clients and Projects&nbsp;</strong></p><br> <br> <p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br> <br> <p>Across EMEA, our teams are providing solutions and expertise to support our growing client base, focused on combining maintenance and operations with asset management, modifications and engineering services across the energy and materials markets. &nbsp;</p><br> <br> <p>We are focused on growth and our strategy is centered around building partnerships with our clients across the three regions: UK, Norway and the Middle East and Africa. &nbsp;</p><br> <p><strong>What we can offer&nbsp;</strong></p><br> <br> <ul> <li><strong>Meaningful and interesting projects: </strong>Delivered to high profile clients across the Energy Sector Commitment to Diversity and Inclusion: We are an organisation actively committed to diversity and inclusion across our business </li> <li><strong>Competitive remuneration package:</strong> With regular reviews to ensure we are rewarding at the right level in line with the market &nbsp;</li> <li><strong>Medical Insurance</strong>: Ensures inpatient, and outpatient medical care is available should you require treatment&nbsp;</li> <li><strong>Group Life and Personal Accident Insurance</strong>: The company provides Life Assurance cover&nbsp;&nbsp;</li> <li><strong>End of Service Gratuity</strong>: In line with UAE Labor Law, all employees are eligible for an End of Service benefit&nbsp;</li> <li><strong>The Employee Share Plan</strong>: Gives you the opportunity to purchase Wood shares and receive a match from the company&nbsp;</li> <li><strong>Long Service Award</strong>: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ service of our employees at 5 year service milestones&nbsp;</li> <li><strong>Commmitment to continued professional development</strong>: Development plans that are tailored to your individual needs and interests &nbsp;</li> <li><strong>Global connections</strong>: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li><strong>Energy Transition Academy</strong>: Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field&nbsp;</li> </ul> <p>Job Objective&nbsp;</p><br> <br> <ul> <li>Provide technical expertise in all Piping design&nbsp;</li> </ul> <br> <ul> <li>Ensure design and engineering compliance with relevant codes and ADNOC standards&nbsp;</li> </ul> <br> <ul> <li>Coordinate, Monitor and handle Piping design and engineering with EPC Contractor as per project expectation and complete the same within the time frame&nbsp;</li> </ul> <br> <ul> <li>Work with other discipline engineers within IPMT, EPC Contractor, ADNOC Engineering / Operation / Site Interface to resolve technical issues and ensure quality Discipline Engineering execution and integrity etc.&nbsp; &nbsp;</li> </ul> <br> <ul> <li>Perform regular and timely technical reviews of Piping Engineering deliverables developed by engineering consultants/contractors, ensuring design quality in compliance with relevant codes, standards, and best practices.&nbsp;</li> </ul> <br> <br> <br> <br><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for an experienced PMC Specialist Engineer, Architectural/Civil for our client ADNOC Offshore project in Abu Dhabi as part of our instrument engineering within our Oil, Gas &amp; New Energies business.&nbsp;</p><br><p>Due to the nature of the projects and client expectation, the position will be based at our client office in Abu Dhabi, United Arab Emirates.&nbsp;</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world</strong></p><br><p>Wood's Oil, Gas &amp; New Energies business is built on a strong legacy of delivering large and complex projects for national and international energy companies across the globe. We have experienced teams, a proven delivery model and a strong reputation.</p><br><p>We are the market-leading provider of integrated and innovative solutions that challenge the status-quo in the oil and gas upstream and midstream, onshore and offshore, gas to liquids and decarbonization and electrification markets. We pride ourselves in steady and predictable delivery, setting our sights on an exciting growth trajectory.&nbsp;</p><br><p>Energy security, transition and supply have never been more important. You, our enabling teams, are at the very forefront of transformative projects that are providing sustainable power to generations to come. We are the ones to bring low-carbon concepts to reality.</p><br><p><strong>What we can offer</strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong>: Delivered to high profile clients across the Energy Sector</li> <li><strong>Commitment to Diversity and Inclusion:</strong> We are an organization actively committed to diversity and inclusion across our business&nbsp;</li> <li><strong>Competitive renumeration package:&nbsp;</strong>With regular reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient, and outpatient medical care is available should you require treatment</li> <li><strong>Group Life and Personal Accident Insurance</strong>:&nbsp;The company provides Life Assurance cover&nbsp;</li> <li><strong>End of Service Gratuity</strong>: In line with UAE Labor Law, all employees are eligible for an End of Service benefit</li> <li><strong>The Employee Share Plan</strong>:&nbsp;Gives you the opportunity to purchase Wood shares and receive a match from the company</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones</li> <li><strong>Commitment to continued professional development</strong>:&nbsp;Development plans that are tailored to your individual needs and interests&nbsp;</li> <li>Global connections:&nbsp;Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Energy Transition Academy:&nbsp;J</strong>oin a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field</li></ul><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><span>The Specialist Enginer, Architectural/Civil is responsible for providing technical oversight, design review, engineering coordination, and construction support for architectural and civil works associated with offshore oil &amp; gas facilities. The role ensures that EPC contractor deliverables comply with project specifications, international codes, client requirements, and safety standards while supporting timely project execution.</span></p><br><ul> <li><span>Review EPC contractor engineering deliverables related to architectural and civil disciplines.</span></li> <li><span>Verify compliance with project specifications, client standards, and international codes.</span></li> <li><span>Review drawings, material specifications, design calculations, and engineering reports.</span></li> <li><span>Participate in interdisciplinary design reviews and HAZID/HAZOP workshops where applicable.</span></li> <li><span>Ensure constructability and maintainability are incorporated into the design.</span></li> <li><span>Monitor EPC contractor engineering progress and quality.</span></li> <li><span>Provide technical clarification and resolve engineering issues.</span></li> <li><span>Review Technical Queries (TQs), Site Queries (SQs), and Engineering Change Notices (ECNs).</span></li> <li><span>Support management of deviations, concessions, and design modifications.</span></li> <li><span>Support offshore construction activities.</span></li> <li><span>Review construction procedures and method statements.</span></li> <li><span>Participate in site inspections and technical audits.</span></li> <li><span>Resolve field engineering issues.</span></li> <li><span>Review non-conformance reports (NCRs) and recommend corrective actions.</span></li></ul><p><span>Offshore Facilities</span></p><br><ul> <li><span>Review architectural layouts for:</span> <ul> <li><span>Living Quarters</span></li> <li><span>Control Rooms</span></li> <li><span>Utility Buildings</span></li> <li><span>Workshops</span></li> <li><span>Warehouses</span></li> <li><span>Helideck support facilities</span></li> <li><span>Escape routes and access systems</span></li> </ul></li> <li><span>Review civil works including:</span> <ul> <li><span>Foundations</span></li> <li><span>Equipment supports</span></li> <li><span>Concrete structures</span></li> <li><span>Drainage systems</span></li> <li><span>Roadworks (where applicable)</span></li> <li><span>Underground utilities</span></li> </ul></li></ul><p><span>Quality &amp; Compliance</span></p><br><ul> <li><span>Ensure compliance with:</span> <ul> <li><span>Project Quality Plan</span></li> <li><span>HSE requirements</span></li> <li><span>Company engineering standards</span></li> <li><span>International codes and standards</span></li> </ul></li> <li><span>Participate in quality surveillance and design verification activities.</span></li></ul><p><span>Coo</span>rdination</p><br><ul> <li>Coordinate with: <ul> <li>Structural Engineering</li> <li>Mechanical Engineering</li> <li>Piping</li> <li>Electrical</li> <li>Instrumentation</li> <li>Process Engineering</li> <li>Marine Engineering</li> <li>Construction Team</li> <li>Client Representatives</li> <li>EPC Contractors</li> <li><span>Vendors</span></li> </ul></li></ul><p>Documentation</p><br><ul> <li>Review and approve: <ul> <li>Design Basis</li> <li>Specifications</li> <li>Material Requisitions</li> <li>Technical Bid Evaluations</li> <li>Vendor Documents</li> <li>IFC Drawings</li> <li>As-built Documentation</li> </ul></li> <li>Prepare technical reports and progress updates.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</p><br><p><strong>Expected</strong></p><br><ul> <li>Bachelor's Degree in Civil Engineering or Architecture.</li> <li>Master's degree is an advantage.</li> <li>Professional Engineer (PE), Chartered Engineer (CEng), or equivalent certification is preferred</li> <li>Minimum 15+ years of experience in civil/architectural engineering.</li> <li>At least 5 years in PMC or Owner's Engineer roles.</li> <li>Experience with offshore oil &amp; gas projects, including: <ul> <li>Offshore platforms</li> <li>Jackets</li> <li>Topsides</li> <li>FPSO</li> <li>Offshore substations</li> </ul></li> <li>Experience with FEED, detailed engineering, construction, and commissioning phases.</li> <li>Strong experience in multidisciplinary engineering coordination.</li></ul> </div>

Senior AI Engineer On-site | Abu Dhabi<br>Applied AI is a pioneering AI technology company headquartered in Abu Dhabi, committed to innovation and excellence in artificial intelligence solutions in regulated industries such as healthcare, insurance, government, and financial services. <br>Opus is the world's first Knowledge Work AI platform. Built by Applied AI to pioneer Supervised Automation, a human-in-the-loop model where AI handles repetitive, structured tasks while human experts provide crucial oversight at defined intervals. <br>The platform uses its proprietary Large Work Model to generate and orchestrate outcome-based workflows, enabling a dramatic reduction in the cost of knowledge work and allowing human talent to focus on high-value, creative, and judgement-intensive activities. <br>Role Overview: <br>As a Senior AI Engineer, you’ll play a key role in the design, evolution, and delivery of Opus’s end-to-end AI infrastructure, spanning model serving, orchestration, prompt alignment, workflow intelligence, and agent systems. <br>Your mission is to ensure that every AI-powered feature across the platform operates with reliability, clarity, and measurable excellence in both performance and user experience.<br>You will guide a multidisciplinary UAE-based team of engineers working across model pipelines, workflow representations, and agentic frameworks. Together, you will refine the systems that connect foundational models, structured process data, and real-world user interactions. <br>Key Responsibilities:<br>Design and evolve high-performance AI serving and orchestration pipelines. Refactor existing systems for clarity, modularity, and maintainability. Improve runtime latency, reliability, and quality metrics across live AI features. Build observability and error-tracking layers to detect regressions before they reach users. Guide prompt and alignment strategies, ensuring consistent model behavior and semantic fidelity across all user-facing features. Collaborate with product teams to ensure AI responses meet quality, stability, and response-time targets. Uphold engineering standards across performance, documentation, and code quality. Lead design reviews, incident analysis, and optimization cycles across Opus AI modules. <br>Qualifications:<br>3-5 years in ML engineering, ideally within a Saa S / Product organisation. Expert in Python. Strong background in real-time model serving, orchestration (Airflow, Celery, Kubernetes), and observability systems. Familiarity with LLM pipelines, workflow modeling, and agent-based AI frameworks. Experience deploying and optimizing inference pipelines (e.g. LLMs, CV or similar APIs). Skilled in monitoring, benchmarking, and system observability. Experience mentoring engineers and managing cross-functional delivery cycles. Proven ability to translate complex AI systems into reliable, scalable, and high-quality user-facing products. Experience improving LLM response consistency and user-facing reliability. Bonus: Experience building and deploying chatbots or conversational AI systems that integrate LLMs, APIs, and user interaction flows.<br>Why join Applied AI:<br>Opportunity to work with a highly innovative AI technology company. Collaborative and innovative work environment. Growing, entrepreneurial and forward-thinking culture. Career growth and professional development opportunities. Exposure to a thriving ecosystem working from our Abu Dhabi HQ.

Job Summary<br><br>Looking for a Databricks Expert to drive next‑gen platform uplift, define best practices, and lead delivery across our Lakehouse ecosystem.<br><br>Responsibilities<br><br>Lead modernization of Databricks platform and adoption of advanced features. Design and deliver Lakeflow jobs, pipelines, and scalable Lakehouse solutions. Implement and optimize Unity Catalog, DQX, DB Genie, AI/BI workloads. Establish engineering best practices, governance, and automation frameworks. Along with the individual contribution, mentor teams and guide technical decision‑making across the organization.<br><br>Requirements<br><br>Around 5+ years in data/platform engineering with deep Databricks expertise Strong Hands‑on experience with Pyspark, Streaming, DBR, Lakeflow, UC, DQX, DB Genie, Delta Lake Experienced in ADF, Synapse and exposure to Azure Dev OPsProven leadership in large‑scale Databricks or Lakehouse transformation projects Strong out of the box thinking, problem‑solving, and deliverables leadership

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Data Engineering: Design, build, and optimize robust ETL/ELT data pipelines from multiple data sources.<br> Architecture &amp; Storage: Maintain cloud data warehouses (e.<br>g., Snowflake, BigQuery, Redshift) and data lakes.<br> Data Quality: Implement data governance, validation checks, and error-handling routines.<br> Advanced Analytics: Query large datasets using complex SQL and Python to extract business value.<br> Visualization &amp; Reporting: Create automated dashboards and BI reports (Tableau, Power BI) for stakeholders.<br> Experience: 4 to 6+ years of combined experience in data engineering and advanced data analysis.<br> Programming: Advanced SQL, Python, or Scala.<br> Big Data &amp; Cloud: Experience with AWS, GCP, or Azure; familiarity with Spark or Hadoop.<br> BI Tools: Expertise in Power BI or Tableau.<br> Orchestration: Hands-on practice with tools like Airflow or dbt.<br> Education: Degree in Computer Science, Engineering, Statistics</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world</strong></p><br><p>Wood's Oil, Gas &amp; New Energies business is built on a strong legacy of delivering large and complex projects for national and international energy companies across the globe. We have experienced teams, a proven delivery model and a strong reputation.</p><br><p>We are the market-leading provider of integrated and innovative solutions that challenge the status-quo in the oil and gas upstream and midstream, onshore and offshore, gas to liquids and decarbonization and electrification markets. We pride ourselves in steady and predictable delivery, setting our sights on an exciting growth trajectory.&nbsp;</p><br><p>Energy security, transition and supply have never been more important. You, our enabling teams, are at the very forefront of transformative projects that are providing sustainable power to generations to come. We are the ones to bring low-carbon concepts to reality.</p><br><p><strong>What we can offer</strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong>: Delivered to high profile clients across the Energy Sector</li> <li><strong>Commitment to Diversity and Inclusion</strong>: We are an organization actively committed to diversity and inclusion across our business&nbsp;</li> <li><strong>Competitive renumeration package:</strong>&nbsp;With regular reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient, and outpatient medical care is available should you require treatment</li> <li><strong>Group Life and Personal Accident Insurance:</strong>&nbsp;The company provides Life Assurance cover&nbsp;<br> End of Service Gratuity: In line with UAE Labor Law, all employees are eligible for an End of Service benefit</li> <li><strong>The Employee Share Plan:</strong>&nbsp;Gives you the opportunity to purchase Wood shares and receive a match from the company</li> <li><strong>Long Service Award:</strong>&nbsp;Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones</li> <li><strong>Commitment to continued professional development:</strong>&nbsp;Development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections:</strong>&nbsp;Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Energy Transition Academy:&nbsp;</strong>Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field</li></ul><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br> <p>Job Objective&nbsp;</p><br> <br> <ul> <li>Provide technical expertise in all Civil and Structural design&nbsp;</li> </ul> <br> <ul> <li>Ensure design and engineering compliance with relevant codes and ADNOC standards&nbsp;</li> </ul> <br> <ul> <li>Coordinate, Monitor and handle Civil and Structural Engineering design and engineering with EPC Contractor as per project expectation and complete the same within the time frame&nbsp;</li> </ul> <br> <ul> <li>Work with other discipline engineers within IPMT, EPC Contractor, ADNOC Engineering / Operation / Site Interface to resolve technical issues and ensure quality Discipline Engineering execution and integrity etc.&nbsp; &nbsp;</li> </ul> <br> <ul> <li>Perform regular and timely technical reviews of Civil and Structural Engineering deliverables developed by engineering consultants/contractors, ensuring design quality in compliance with relevant codes, standards, and best practices.&nbsp;</li> </ul> <br> <p>Responsibilities&nbsp;</p><br> <br> <ul> <li>Ensure integration of overall Civil and Structural Engineering. Overall coordination within IPMT Mechanical Civil and Structural Engineering Team&nbsp;</li> </ul> <br> <ul> <li>Ensure quality and accuracy of Engineering Consultant’s &amp; EPC Contractor’s Civil and Structural Engineering design activities&nbsp;</li> </ul> <br> <ul> <li>Review and approval of Engineering Consultant's and EPC Contractor’s work and ensure compliance with ADNOC project specifications, relevant codes and standards, and best industry practices&nbsp;</li> </ul> <br> <ul> <li>Coordinate the required engineering participation in the development and analysis of various design options and business models. Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation.&nbsp;</li> </ul> <br> <ul> <li>Participate in teams for equipment sizing / equipment selection considering optimization and standardization.&nbsp;</li> </ul> <br> <ul> <li>Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects.&nbsp;</li> </ul> <br> <ul> <li>Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects.&nbsp;</li> </ul> <br> <ul> <li>Participate in layout reviews, Model review, design reviews, and technical workshops.&nbsp;</li> </ul> <br> <ul> <li>Provide technical assistance and coordination with other discipline engineers.&nbsp;</li> </ul> <br> <ul> <li>Coordinate technical reviews and bid evaluation, and performance evaluation.&nbsp;</li> </ul> <br> <ul> <li>Provide technical assistance during installation, pre-commissioning &amp; commissioning&nbsp;</li> </ul> <br> <ul> <li>Report to ADNOC Discipline Team Leader, Engineering Manager, and provide support to Project Managers and Engineers within the Project Management Team organization&nbsp;</li> </ul> <br><br> <ul> <li>Interface with Managers, Team Leaders and Engineers in Company's Technical Departments, Business Units, Operations Units, and Logistics Department&nbsp;</li> </ul> <br> <ul> <li>Interface regularly with Contractor’s Engineering and Project Management team and discipline engineers as and when required&nbsp;&nbsp;</li> </ul> <br><br><br>Qualifications:<br> <p>Qualifications&nbsp;&nbsp;</p><br><br> <ul> <li>Bachelor of Science degree in Civil Engineering&nbsp;</li> </ul><br> <ul> <li>Minimum of 15 years of relevant experience in oil and gas industry&nbsp;&nbsp;</li> </ul><br> <ul> <li>Excellent written and verbal communication skills&nbsp;</li> </ul><br> <ul> <li>Excellent technical team and interpersonal skills&nbsp;</li> </ul><br> <ul> <li>Experience and detailed knowledge of relevant international codes and standards&nbsp;</li> </ul><br> <ul> <li>Knowledge of engineering computer programs and general business software&nbsp;</li> </ul><br> <ul> <li>Ability to make independent decisions in the planning, organizing and coordinating to develop solutions to complex problems&nbsp;</li> </ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Specialist Engineer - Construction - Mechanical - Fabrication Yard – Offshore PMC project<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u><span>Specialist Engineer - Construction - Mechanical - Fabrication Yard – Offshore PMC project</span></u></b></p><br><br><br><p><b>KBR Abu Dhabi is currently seeking to hire Specialist Engineer - Construction - Mechanical - Fabrication Yard for an Offshore PMC project to be based in Fabrication Yard Office role in Abu Dhabi or Dubai Office.</b></p><br><br><br><p><b>The team is looking for someone who has min 15 years of experience in Construction - Mechanical within oil &amp; gas industries.</b></p><br><br><br><p><b><u>Job Responsibilities: </u></b></p><br><br><br><p><b>Profile matching below criteria only will be contacted</b></p><br><br><br><ul><li><b>Engineering degree in any discipline is a must.</b></li><li><b>Minimum 15 years of proven experience in Construction - Mechanical within oil &amp; gas industries.</b></li><li><b>Oversee and supervise fabrication yard activities, ensuring compliance with project specifications, drawings, and quality standards.</b></li><li><b>Ensure adherence to HSE requirements and promote a strong safety culture within the fabrication yard.</b></li><li><b>Monitor fabrication progress and ensure alignment with project schedules and milestones</b></li><li><b>Support project execution by ensuring timely completion of fabrication, assembly, and pre-commissioning activities</b>.</li></ul><br><br><br> </div>

We are seeking a skilled, proactive, and detail-oriented Assistant Resident Engineer – Buildings to join our team for a project in KIZAD, Abu Dhabi. The successful candidate will play a key role in supporting the delivery of building construction works, ensuring projects are completed on schedule, within budget, and in accordance with approved designs, specifications, quality standards, and safety requirements.<br>Immediate joiners preferred.<br>REQUIREMENTS<br>Educational Background:Bachelor’s degree in Civil Engineering or related program Relevant Experience:Minimum 12 total years of experience in the field of engineering, at least 6 in UAE. Supervision Expertise: Demonstrates a comprehensive track record in all aspects of civil supervision for significant building projects mainly warehouses and industrial buildings. Thorough understanding of engineering, civil construction, and industry-leading practices. Software Proficiency:Familiar with MS Office, Outlook, Auto CAD and other related software.<br>DUTIES AND RESPONSIBILITIESReport to the Resident Engineer and contribute to the supervision of buildings construction projects and related tasks. Manage phase, part or area of the project as assigned by Management and RE. Act as a substitute for the Resident Engineer during their absence or leave. Collaborate closely with other engineers and members of the construction supervision team to coordinate activities effectively. Assist the Resident Engineer in the review of shop drawings, design proposals, method statements, and other tasks related to the utility section, including the preparation of responses for the Resident Engineer's review. Coordinate with ALSUWEIDI's design engineers to resolve related issues. Maintain comprehensive daily diaries and reports prepared by inspectors. Work with contractor engineers to manage scheduling and resource allocation. Provide guidance, support, and oversight for inspectors and surveyors as required. Organize and lead special meetings involving service authorities, contractors, subcontractors, and other relevant parties related to your responsibilities. Ensure the accuracy and completeness of records. Oversee the achievement of safety objectives on the project and supervise the implementation of safety protocols. Assist in the preparation of weekly and monthly progress reports. Actively engage in all health and safety matters on-site, as directed by the Resident Engineer and project safety representatives. Offer necessary on-site direction and support the Resident Engineer in issuing site instructions related to utility works and related items. Verify and measure the completed work within your area of responsibility, maintain records, and assist the Resident Engineer in tracking progress against the project schedule. Verify the accuracy and completeness of as-built drawings within your scope of work. Examine and validate material submissions, analyze technical reports, execute acceptance sampling plans, perform testing, and assess quality to guarantee adherence to project specifications.<br>Please note that only shortlisted candidates will be contacted.

<ul><li><p>Coordinate and supervise Mechanical, Electrical, and Plumbing (MEP) works for residential and commercial projects.</p></li><li><p>Prepare, review, and approve MEP shop drawings, technical submittals, and material submittals.</p></li><li><p>Obtain and manage approvals from <strong>DEWA</strong> and <strong>Dubai Civil Defence (DCD)</strong>.</p></li><li><p>Ensure all MEP installations comply with local authority regulations, UAE codes, and project specifications.</p></li><li><p>Coordinate with architects, civil engineers, consultants, contractors, and government authorities.</p></li><li><p>Conduct site inspections and monitor project progress to ensure quality and timely completion.</p></li><li><p>Resolve technical issues related to MEP systems during design and construction</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree in Mechanical Engineering or Electrical Engineering.</p></li><li><p>Valid <strong>DEWA certification/approval</strong>.</p></li><li><p>Valid <strong>Dubai Civil Defence (DCD) certification/approval</strong>.</p></li><li><p>Minimum <strong>3–5 years of MEP engineering experience</strong> in the UAE.</p></li><li><p>Strong knowledge of UAE building codes and authority regulations.</p></li><li><p>Experience in residential and commercial building projects.</p></li><li><p>Proficiency in AutoCAD and Microsoft Office (knowledge of Revit is an advantage).</p></li></ul>