وظائف مهندس انظمة مدمجة في الإمارات

<p>The <strong>Precast Senior Structural Engineer</strong> leads the structural design, analysis, and detail engineering for precast and prestressed concrete elements (beams, columns, hollow-core slabs, insulated wall panels, and staircases). Working within a precast manufacturing environment, this role ensures all components are structurally sound for final building loads, while also engineering them to withstand the transient stresses of factory demolding, yard handling, transportation, and site erection.</p><p><strong>Key Responsibilities</strong></p><ul><li><p><strong>Structural Analysis & Design Calculations</strong></p><ul><li><p>Perform complete structural analysis and design calculations for precast/prestressed concrete elements in accordance with ACI, PCI, or Eurocode standards.</p></li><li><p>Structural design of precast connections (corbels, welded plates, grouted sleeves, post-tensioned tendons, shear keys, and mechanical splices).</p></li><li><p>Calculate dynamic and temporary loading conditions for lifting, stripping, tipping, transport, and site erection stages.</p></li></ul></li><li><p><strong>Production Drawings & BIM Oversight</strong></p><ul><li><p>Oversee the generation of detailed fabrication shop drawings, reinforcement schedules (BBS), strand patterns, embedded items layout, and mold setups.</p></li><li><p>Review and approve production-ready shop drawings created by structural detailers and BIM modelers.</p></li><li><p>Resolve structural clashes between precast elements, MEP cast-in sleeves, and cast-in-place interfaces.</p></li></ul></li><li><p><strong>Engineering Support for Factory & Site</strong></p><ul><li><p>Propose value-engineering solutions to optimize concrete mix strength, strand utilization, panel thickness, and mold standardization.</p></li><li><p>Assess and issue engineering repair methodologies for non-conforming or damaged precast elements during demolding, handling, or site installation.</p></li><li><p>Assist the erection team by reviewing crane capacities, rigging configurations, temporary propping, and erection sequences.</p></li></ul></li><li><p><strong>Compliance & Technical Coordination</strong></p><ul><li><p>Prepare and sign off on structural submittals, design reports, and calculations for third-party consultant and authority approvals.</p></li><li><p>Conduct site visits and factory inspections to verify reinforcement placement, tendon tensioning, and embed alignment prior to casting.</p></li></ul></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications & Skills:</p><br><p>Education: Bachelor’s or Master’s Degree in Civil/Structural Engineering. Professional Engineer (PE) or Chartered Engineer (SE/CEng) license preferred.</p><p>Experience7–12+ years of structural engineering experience, with at least 5 years specifically in precast/prestressed concrete design and manufacturing.</p><p>Software Skills: ETABS, SAP2000, SAFE, Tekla Structures (Precast/Prestressed), AutoCAD, RISA-3D, IDEA Statica (connection design), and prestressed design software (e.g., Concise Beam).</p><p>Technical KnowledgeI: in-depth understanding of PCI Design Handbook, ACI 318, post-tensioning/pre-tensioning principles, strand relaxation, creep and shrinkage calculations, and connection design.</p>

<p>Engineering preferable in Electrical/ Electronics Engineering</p><ol><li><p>Previous ADNOC Project experience preferred</p></li><li><p>Minimum 2 Years Work Experience in Telecommunication and Security system technical</p></li></ol><p>documentation.</p><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Review and interpret project specifications, proposals, schematics, drawings, and technical documents.</p></li><li><p>Prepare and review telecom and security system engineering documents.</p></li><li><p>Design and review telecom systems including CCTV, ACS, PAGA, LAN, FO Network, Telephone, and Structured Cabling systems.</p></li><li><p>Prepare and review technical queries, BOM, datasheets, FDS, and engineering calculations.</p></li><li><p>Develop and review telecom system drawings including block diagrams, equipment layouts, cable routing, installation, and termination drawings.</p></li><li><p>Perform CCTV, PAGA, and Wi-Fi coverage studies as required.</p></li><li><p>Ensure compliance with IEC, IEEE, TIA standards and project specifications.</p></li><li><p>Review equipment datasheets and verify power and communication requirements.</p></li><li><p>Analyze system architecture, redundancy mechanisms, and network connectivity requirements.</p></li><li><p>Understand and verify device connectivity including Fiber Optic, Ethernet, RS232, RS485, AC/DC power, and PoE connections.</p></li><li><p>Coordinate with engineering teams, vendors, and site teams for technical clarifications.</p></li><li><p>Support installation, testing, and commissioning activities at project sites.</p></li><li><p>Troubleshoot technical issues related to telecom and security systems.</p></li><li><p>Prepare cable schedules, material requisitions, technical evaluations, and other engineering deliverables.</p></li><li><p>Ensure all telecom engineering documents are updated and maintained as per project requirements.</p></li><li><p>Support ADNOC projects and comply with client engineering standards and procedures.</p></li></ol>

Role: Database Reliability Engineer (Remote) Location: Remote (Work from Anywhere) Job Type: Full-Time Payout: $220K - $260K/yr<br>Role Overview:We are hiring for one of our clients, seeking a Senior Database Reliability Engineer to work on a full-time basis. This role requires designing, implementing, and maintaining scalable database systems to ensure high availability and performance.<br>Key Responsibilities:• Design, deploy, and optimize database architectures to meet performance and scalability requirements.• Implement monitoring, alerting, and automated recovery processes for database systems.• Lead incident response and post-mortem analysis to minimize downtime and improve system resilience.• Collaborate with engineering teams to integrate database best practices into development workflows.• Evaluate and adopt new database technologies and tools to enhance reliability and efficiency.<br>Required Skills & Qualifications:• 5+ years of experience in database administration or reliability engineering with Postgre SQL, MySQL, or similar systems.• Strong proficiency in SQL and database optimization techniques.• Experience with cloud platforms such as AWS, GCP, or Azure and their managed database services.• Knowledge of infrastructure as code tools like Terraform or Ansible for database deployments.• Familiarity with observability tools such as Prometheus, Grafana, or Datadog.• Ability to automate routine database tasks and write scripts in Python, Bash, or Go.• Understanding of database security best practices and compliance requirements.• Experience with high-availability configurations and disaster recovery planning.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Software Development | Technology, Information and Internet industry, contributing to the stability and scalability of mission-critical database systems. The position involves direct collaboration with cross-functional teams to drive improvements in database performance and reliability.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview &amp; Responsibilities</b><p><b>Purpose of the Job</b></p><br><p>The IT Engineer is an experienced level position involved in the planning, execution, and management of new applications into existing systems and software throughout the enterprise.</p><br><p>This position is designed to provide the IT infrastructure required to run application software to support the computational and information needs of the company.</p><br><p>The successful candidate will act as the first point of contact for all IT helpdesk queries, resolving issues directly or escalating them to senior engineers as required. Overall, the role ensures that technical operations run smoothly and hardware and operating systems are expertly maintained.</p><br><p><b>Nature of the Job</b></p><br><ul><li><p><b>Technical Troubleshooting &amp; Analysis:</b> Independently resolve complex, varied software access and performance issues by applying diversified procedures and analytical evaluation to determine the best course of action.</p><br></li><li><p><b>Cross-Functional Collaboration:</b> Work cooperatively and effectively with colleagues and partners across the entire organization to achieve shared goals.</p><br></li><li><p><b>Data-Driven Influence:</b> Leverage strong social and communication skills to understand stakeholders and influence decision-making using logic and data.</p><br></li><li><p><b>Independent Role: </b>This is primarily an Individual Contributor role and does not include any direct supervisory responsibilities or hiring authority.</p><br></li></ul><br><p><b>Specific Job Responsibilities/Competencies</b></p><br><p>As an IT Engineer, this role encompasses daily helpdesk operations, long-term strategic IT planning, and system deployments. The engineer will ensure that technology integrations meet compliance and functional specifications while driving continuous improvement in system performance.</p><br><p>The primary responsibilities of this role include the following:</p><br><ul><li><p>Evaluate system hardware and OS.</p><br></li><li><p>Monitor systems to track operating efficiency and to ensure service level objectives are met.</p><br></li><li><p>Liaise with other software developers and engineers to address issues in program logic, as well as the interoperability of new applications with existing systems software.</p><br></li><li><p>Work with data owners and business systems analysts to develop models, procedures, and protocols for reporting in concert with requirements.</p><br></li><li><p>Test software and communicate and document results and make recommendations based on findings.</p><br></li><li><p>Develop standards and processes to support and facilitate integration projects and initiatives.</p><br></li><li><p>Adhere to change management and documentation standards.</p><br></li><li><p>Respond to, track, and monitor inquiries and requests for assistance with software, hardware, and other technical problems.</p><br></li><li><p>Travel as per business needs</p><br></li></ul><p><b>Background and Experience</b></p><br><ul><li><p><b>Technical Core Knowledge:</b> Possess a thorough understanding of internal computer operating systems, networking, programming, and analytical methods.</p><br></li><li><p><b>Diagnostic &amp; Repair Expertise:</b> Demonstrate expert capabilities in diagnosing and repairing technical issues.</p><br></li><li><p><b>Independent OS Configuration:</b> Ability to install and configure operating systems effectively with limited supervision.</p><br></li><li><p><b>Customer Satisfaction &amp; Passion:</b> Show a high sensitivity to customer needs and a deep, genuine interest in the broader field of Information Technology.</p><br></li><li><p><b>Project Management:</b> Maintain a solid working knowledge of project management processes.</p><br></li></ul><br><ul><li><p><b>Education Requirement:</b> A Bachelor’s degree in IT or related field. (Specifically, Computer or Information Science, Mathematics, or Engineering).</p><br></li><li><p><b>Minimum Experience:</b> 3 years’ experience in IT.</p><br></li><li><p><b>Preferred Experience:</b></p><br><ul><li><p>Intune experience</p><br></li><li><p>Google Workspace (GWS) experience</p><br></li></ul></li></ul><p><b>Base Location &amp; Work Schedule</b></p><br><p>This is a full-time permanent position based in Abu Dhabi, UAE on a hybrid working basis.</p><br><p><span><b>The world turns to Ebara Elliott Energy.</b></span></p><br><p><span>Customers throughout the world choose Ebara Elliott Energy for the design, manufacture and service of their critical rotating equipment. EEE’s global service network routinely installs, overhauls, repairs, upgrades and rerates machines from any manufacturer. Customers everywhere turn to EEE for precision engineering, extraordinary reliability and unparalleled service.</span></p><br><p><span>To learn more about our Job Applicant Privacy Notice, please </span>click here<span>.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Electrical Engineer - Offshore Subsea Project - Pkg 2<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;Job Title: Lead Electrical Engineer </u></b> </p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Client or Contractors Office in Abu Dhabi.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The Lead Electrical Engineer is responsible for leading and coordinating all electrical engineering activities for ADNOC Offshore projects, ensuring that designs and deliverables comply with ADNOC Offshore standards, project specifications, international codes, safety requirements, budget, and schedule commitments.</p><br><br><p>The role provides technical leadership during FEED, Detailed Engineering, Procurement, Construction, Commissioning, and Start-Up phases for offshore platforms, substations, process facilities, pipelines, and brownfield modifications.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Electrical Engineering Leadership</b></p><br><br><ul><li>Lead a team of electrical engineers and designers for offshore oil &amp; gas projects.</li><li>Plan, supervise, and coordinate all electrical engineering activities.</li><li>Ensure quality, accuracy, and timely delivery of electrical engineering deliverables.</li><li>Provide technical guidance and mentorship to project electrical personnel.</li><li>Review and approve engineering calculations, designs, and technical documents.</li></ul><br><p><b>Design &amp; Engineering Activities</b></p><br><br><ul><li>Develop and review:<ul><li>Electrical Single Line Diagrams (SLDs)</li><li>Load Lists</li><li>Power System Studies</li><li>Electrical Equipment Specifications</li><li>Lighting and Small Power Systems</li><li>Earthing and Lightning Protection Systems</li><li>Cable Routing and Sizing Calculations</li><li>Hazardous Area Classification Reviews</li><li>Electrical Layout Drawings</li></ul></li><li>Ensure compliance with ADNOC Offshore standards and project requirements.</li><li>Verify design compatibility with offshore environmental conditions.</li></ul><br><p><b>Power System Engineering</b></p><br><br><ul><li>Lead electrical system design for:<ul><li>HV, MV, and LV Power Distribution Systems</li><li>Emergency Power Systems</li><li>UPS Systems</li><li>Diesel Generators</li><li>Gas Turbine Generators</li><li>Motor Control Centers (MCC)</li><li>Variable Frequency Drives (VFD)</li><li>Electrical Substations</li></ul></li><li>Review and approve:<ul><li>Load Flow Studies</li><li>Short Circuit Studies</li><li>Motor Starting Studies</li><li>Arc Flash Studies</li><li>Protection Coordination Studies</li><li>Transient Stability Studies</li></ul></li></ul><br><p><b>Vendor and Procurement Support</b></p><br><br><ul><li>Prepare technical requisitions and datasheets.</li><li>Participate in technical bid evaluations.</li><li>Review vendor drawings and technical documentation.</li><li>Resolve vendor technical queries.</li><li>Ensure vendor equipment complies with ADNOC specifications and project requirements.</li></ul><p><b>Equipment Typically Managed</b></p><br><br><ul><li>Transformers</li><li>Switchgear</li><li>MCCs</li><li>Generators</li><li>UPS Systems</li><li>Battery Chargers</li><li>VFDs</li><li>Motors</li><li>Lighting Systems</li><li>Cable Systems</li><li>Cathodic Protection Interfaces</li></ul><br><p><b>Interface Coordination</b></p><br><br><ul><li>Coordinate with:<ul><li>Process Engineering</li><li>Mechanical Engineering</li><li>Instrumentation &amp; Control Engineering</li><li>Telecom Engineering</li><li>Civil &amp; Structural Engineering</li><li>Construction and Commissioning Teams</li></ul></li><li>Support multidisciplinary design reviews and constructability assessments.</li><li>Ensure smooth resolution of electrical interfaces with existing ADNOC Offshore facilities.</li></ul><br><p><b>Offshore &amp; Brownfield Projects</b></p><br><br><ul><li>Lead electrical engineering activities for:<ul><li>Offshore Platforms</li><li>Wellhead Towers</li><li>Process Facilities</li><li>Gas Compression Facilities</li><li>Artificial Islands</li><li>Pipeline Facilities</li><li>Brownfield Modification Projects</li></ul></li><li>Support shutdown planning and tie-in activities.</li><li>Coordinate electrical isolation and energization requirements.</li></ul><br><p><b>Safety, Risk &amp; Compliance</b></p><br><br><ul><li>Ensure compliance with:<ul><li>ADNOC Offshore Standards</li><li>ADNOC Codes of Practice</li><li>IEC Standards</li><li>IEEE Standards</li><li>API Standards</li><li>NFPA Requirements</li><li>UAE Regulations</li></ul></li><li>Participate in:<ul><li>HAZID Workshops</li><li>HAZOP Reviews</li><li>SIL Assessments</li><li>Constructability Reviews</li><li>Design Reviews</li></ul></li><li>Promote safe engineering practices and risk mitigation.</li></ul><br><p><b>Construction &amp; Commissioning Support</b></p><br><br><ul><li>Support construction teams during installation activities.</li><li>Provide technical support for site queries and field modifications.</li><li>Participate in:<ul><li>Factory Acceptance Tests (FAT)</li><li>Site Acceptance Tests (SAT)</li><li>Pre-Commissioning Activities</li><li>Commissioning and Start-up</li></ul></li><li>Review commissioning procedures and energization plans.</li></ul><br><p><b>Documentation &amp; Reporting</b></p><br><br><ul><li>Prepare and review:<ul><li>Electrical Design Basis</li><li>Engineering Calculations</li><li>Technical Specifications</li><li>Construction Work Packs</li><li>Commissioning Procedures</li><li>As-Built Documentation</li></ul></li><li>Monitor engineering progress and report status to Engineering Management.</li></ul><br><p><b>Qualifications</b></p><br><br><p><b>Education</b></p><br><br><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Master's Degree in Electrical Engineering is an advantage.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>Minimum <b>15 years of Electrical Engineering experience</b> in Oil &amp; Gas projects.</li><li>Minimum <b>5–8 years as a Lead Electrical Engineer</b> on offshore EPC/EPCM projects.</li><li>Proven ADNOC Offshore or major Middle East offshore project experience preferred.</li><li>Experience in both greenfield and brownfield offshore projects.</li></ul><br><p><b>Technical Knowledge</b></p><br><br><p><b>Mandatory</b></p><br><br><ul><li>ADNOC Offshore Engineering Standards.</li><li>Offshore Electrical System Design.</li><li>HV, MV, LV Distribution Systems.</li><li>Power System Studies.</li><li>Hazardous Area Design.</li><li>Offshore Platform Electrical Systems.</li><li>Electrical Equipment Specification and Procurement.</li><li>Commissioning and Start-Up Support.</li></ul><br><p><b>Software Knowledge</b></p><br><br><p>Experience with:</p><br><br><ul><li>ETAP</li><li>SKM Power Tools</li><li>DigSILENT PowerFactory</li><li>AVEVA Engineering</li><li>SmartPlant Electrical</li><li>E3D</li><li>AutoCAD</li><li>Navisworks</li><li>Aconex</li></ul><br><p><b>Key Competencies</b></p><br><br><p><b>Technical Competencies</b></p><br><br><ul><li>Electrical System Design</li><li>Power Systems Engineering</li><li>Equipment Selection &amp; Specification</li><li>Hazardous Area Engineering</li><li>Electrical Protection Systems</li><li>Commissioning Support</li></ul><p><b>Leadership Competencies</b></p><br><br><ul><li>Team Leadership</li><li>Engineering Coordination</li><li>Technical Decision Making</li><li>Mentoring and Development</li></ul><p><b>Behavioral Competencies</b></p><br><br><ul><li>Analytical Thinking</li><li>Problem Solving</li><li>Communication Skills</li><li>Stakeholder Management</li><li>Attention to Detail</li></ul><br><p><b>Preferred Certifications</b></p><br><br><ul><li>Chartered Engineer (CEng)</li><li>Professional Engineer (PE)</li><li>PMP Certification</li><li>ETAP Certified Engineer</li><li>IEC/IEEE Specialized Training</li><li>ADNOC Approved Engineering Courses</li></ul><br><br><br> </div>

BK Gulf is a leading contractor in electrical, mechanical, instrumentation and building services within the UAE & Middle East markets.<br>It provides integrated engineering solutions which encompass design, procurement, construction, project management, commissioning and facilities management tailored to clients’ requirements.<br>The highest professional standards of workmanship and service are maintained through BK Gulf’s commitment to efficient planning, the use of highly skilled craftsman and the maintenance of permanent local teams.<br>BK Gulf has an excellent record in providing value-added engineering, installation and service skills to customers for whom quality, efficiency and reliability are critical.<br>BK Gulf is a Dutco Group company.<br>Role Overview:<br>The Instrumentation Engineer (Electrical Engineer – ELV ) is responsible for the design, specification, integration, and commissioning of instrumentation and control systems for modular E-Houses and data center facilities. The role involves developing instrumentation designs, coordinating with multidisciplinary teams, ensuring compliance with industry standards and project requirements, and supporting installation, testing, and commissioning activities to deliver safe, reliable, and efficient systems.<br>Key Responsibilities:<br>Design and specify instrumentation systems, including sensors, transmitters, control devices, and monitoring equipment for modular units. Develop and review instrumentation layouts, cable routing drawings, I/O lists, loop diagrams, and interface details in coordination with electrical and mechanical disciplines. Ensure compliance with applicable industry standards (ISA, IEC, API) and project specifications for instrumentation and control systems. Review vendor documentation and technical submittals, ensuring proper integration of instrumentation equipment within modular E-Houses and data center modules. Coordinate with internal teams, contractors, and vendors to resolve technical issues and optimize system performance. Support installation, testing, and commissioning activities, ensuring proper calibration, functionality, and reliability of instrumentation systems. Troubleshoot instrumentation and control system issues during project execution and commissioning phases. Ensure all designs and deliverables meet project quality, safety, and operational requirements.<br>Qualifications and Experience:<br>Bachelor's Degree in Instrumentation, Control Systems, Electrical Engineering, or related field. Minimum 5 years of experience in instrumentation and control engineering. Experience in modular E-House, data center, industrial, or critical infrastructure projects. Knowledge of PLC, SCADA, BMS, instrumentation devices, and control systems. Familiarity with ISA, IEC, and API standards. Experience in system testing, commissioning, and troubleshooting. Strong coordination, communication, and problem-solving skills.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking a highly skilled Senior Product Engineer (Finacle &amp; Automation Testing) to join a leading enterprise banking technology team in Dubai.<br> Operating within the Software Engineering Chapter, this role focuses on the end-to-end quality, automation, and delivery of core financial applications across our Business Platforms &amp; Core Platforms.<br> The ideal candidate will blend deep functional expertise in the Finacle 11X core banking ecosystem with advanced test automation engineering.<br> You will be responsible for driving high-quality, automation-driven test coverage across critical banking modules, verifying complex integrations, and leveraging Finacle scripting to accelerate delivery within an Agile framework.<br> Key Responsibilities1.<br> Finacle Core Testing &amp; Domain Validation Design, develop, and execute comprehensive test suites for Finacle 11X core banking environments, specifically covering CRM, Core Banking, and Payments modules.<br> Validate end-to-end complex functional flows across retail and corporate banking tracks, specializing in Assets and Liabilities .<br> Perform advanced technical log validation and leverage Finacle scripting techniques to isolate, debug, and troubleshoot system anomalies during testing phases.<br> 2. Test Automation Engineering Architect, build, and maintain highly scalable automated test frameworks using Selenium (Java) or Playwright (Node.<br>js) . Embed seamless in-sprint automation testing frameworks tightly aligned with fast-paced Agile delivery cycles.<br> Develop robust automation scripts to validate SOAP and REST Finacle APIs , ensuring seamless system integration.<br> 3. Database, Integration &amp; Platform Engineering Analyze and validate data integrity using FIXML messages and advanced SQL scripting.<br> Collaborate within the Software Engineering chapter to champion CI/CD testing pipelines, lowering regression risks across core banking deployments.<br> Technical Specifications &amp; SkillsCore Finacle &amp; Domain Expertise (Essential) Finacle Platform: Strong testing and engineering experience on the Finacle ecosystem (highly preferred on Finacle 11X ).<br> Module Exposure: Hands-on functional validation across Finacle CRM, Core, and Payments modules.<br> Domain Knowledge: Solid structural understanding of banking operations, specifically the Assets and Liabilities domains.<br> Data &amp; Protocols: Working proficiency with FIXML and writing SQL queries for backend database validation.<br> Automation &amp; Scripting (Crucial) Frameworks: Hands-on expertise in Selenium with Java OR Playwright with Node.<br>js for web automation.<br> API Testing: Proven ability to automate and test SOAP and REST APIs .<br> Technical Scripting: Knowledge of Finacle scripting methodologies and advanced log validation techniques.<br> Preferred Experience Prior hands-on exposure to large-scale Finacle implementation or migration testing projects within an enterprise banking environment.<br> Qualifications &amp; Experience Education: Bachelor’s or Master’s degree in Computer Science, Information Technology, Software Engineering, or a strictly equivalent technical field.<br> Experience: Proven track record in a senior engineering capacity focusing on core banking automation testing.<br> Soft Skills: Exceptional technical debugging skills, an agile mindset, and excellent cross-functional communication skills to work seamlessly with development and business units.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Al Tayer Engineering is looking for a dynamic and motivated Junior Sales Engineer – BMS to join our growing Building Management Systems (BMS) team. The successful candidate will support business development activities and drive sales of BMS, PICV, BTU Meters, Thermostats, VAVs, and related energy management solutions in Abu Dhabi Market. This role offers an excellent opportunity for engineering graduates and early-career sales professionals to develop their technical and commercial expertise within the building automation industry.</p><p><strong>Functional Roles and Responsibilities:</strong></p><ul><li><p>Support the sales team in promoting Honeywell BMS, BTU Meters, PICVs, Thermostats, VAVs, and related solutions.</p></li><li><p>Identify and develop new business opportunities with MEP contractors, consultants, facility management companies, and end users.</p></li><li><p>Prepare technical and commercial proposals, quotations, and tender submissions.</p></li><li><p>Conduct product presentations and technical discussions with customers.</p></li><li><p>Follow up on leads, inquiries, and quotations to convert opportunities into orders.</p></li><li><p>Assist in project tracking, order processing, and customer relationship management.</p></li><li><p>Coordinate with engineering and operations teams to ensure timely project execution and customer satisfaction.</p></li><li><p>Maintain regular visits to customers and consultants to strengthen business relationships.</p></li><li><p>Gather market intelligence on competitors, pricing, and upcoming projects.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in mechanical, Electrical, Electronics, Instrumentation, or related Engineering discipline.</p></li><li><p>2–5 years of experience in sales, estimation, or engineering related to BMS, HVAC controls, or MEP systems.</p></li><li><p>Fresh graduates with a strong interest in technical sales are encouraged to apply.</p></li><li><p>Knowledge of BMS, HVAC systems, BTU meters, PICVs, VAVs, and energy management solutions will be an advantage.</p></li><li><p>Good communication, presentation, and interpersonal skills.</p></li><li><p>Strong customer-oriented and result-driven mindset.</p></li><li><p>Proficiency in MS Office applications.</p></li><li><p>UAE Driving License must</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Lead the design and engineering of complete electrical systems including power distribution, lighting, low voltage systems, emergency power (generators &amp; UPS), fire alarm, earthing, and lightning protection.</p></li><li><p>Prepare detailed electrical drawings, single-line diagrams, load calculations, cable schedules, and specifications using AutoCAD, Revit, Dialux, and ETAP.</p></li><li><p>Perform electrical load analysis, voltage drop calculations, short circuit studies, and coordination studies.</p></li><li><p>Coordinate with Mechanical, Plumbing, and other disciplines to ensure clash-free MEP designs (BIM coordination).</p></li><li><p>Review shop drawings, material submittals, and technical proposals from contractors/vendors.</p></li><li><p>Provide technical support during tendering, construction, and commissioning phases.</p></li><li><p>Ensure all designs comply with local and international standards (IEC, NEC, NFPA, local authority regulations, etc.).</p></li><li><p>Conduct site inspections, attend technical meetings with clients, consultants, and contractors.</p></li><li><p>Mentor junior engineers and guide the electrical design team on complex projects.</p></li><li><p>Value engineering and optimization of electrical systems for cost and energy efficiency.</p></li><li><p>Prepare BOQ, cost estimates, and technical reports.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Education: Bachelor’s Degree in Electrical Engineering (Master’s degree is a plus).</p></li><li><p>Experience: Minimum 8–12 years of relevant experience in MEP consulting, contracting, or design firms. At least 3–4 years in a senior/lead role.</p></li><li><p>Proven track record in large-scale projects (high-rise, hotels, hospitals, malls, data centers, or industrial facilities preferred).</p></li><li><p>Strong knowledge of MEP coordination and BIM workflows (Revit/Navisworks).</p></li><li><p>Experience with power system analysis software (ETAP, EPLAN, or similar).</p></li><li><p>In-depth knowledge of local codes and international standards.</p></li></ol><p></p></section>

Role: Senior Software Engineer - Backend (Remote) Location: Remote (Work from Anywhere) Job Type: Contract Payout: $50 - $150/hour<br>Role Overview:We are hiring for one of our clients, seeking a Senior Software Engineer to work on a contract basis. The role involves designing, developing, and maintaining high-performance software systems while collaborating with cross-functional teams to deliver scalable solutions.<br>Key Responsibilities:• Design, implement, and optimize software systems to meet performance and scalability requirements.• Lead code reviews, mentor junior engineers, and ensure adherence to best practices.• Collaborate with product managers and stakeholders to define technical requirements.• Troubleshoot and resolve complex technical issues in production environments.• Contribute to architectural decisions and system design for long-term maintainability.<br>Required Skills & Qualifications:• Bachelor’s degree in Computer Science, Engineering, or a related field, or equivalent practical experience.• 5+ years of professional software development experience in relevant technologies.• Proficiency in programming languages such as Python, Java, or Go.• Strong understanding of data structures, algorithms, and system design principles.• Experience with cloud platforms like AWS, GCP, or Azure.• Familiarity with containerization and orchestration tools (e.g., Docker, Kubernetes).• Knowledge of CI/CD pipelines and Dev Ops practices.• Experience with microservices architecture and distributed systems.<br>More About the Opportunity:This role offers a unique opportunity to work with a global leader in the Software Development | Technology, Information and Internet | IT Services and IT Consulting industry, contributing to the development of cutting-edge platforms that power mission-critical services.<br>Equal Opportunity Employer:We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications.<br>Apply Now!

Company Description ATS FZE is a technology-focused engineering and services company operating in the United Arab Emirates, supporting industrial and commercial clients with advanced technical solutions. The organization specializes in the implementation, maintenance, and optimization of engineering systems and equipment, often working closely with client teams on-site. ATS FZE emphasizes reliability, safety, and performance, aiming to deliver high-quality service and long-term value. Team members are encouraged to contribute ideas, collaborate across disciplines, and develop professionally through exposure to diverse projects. The company values integrity, customer focus, and technical excellence in all engagements.<br>Role Description The Resident Engineer is a full-time, on-site role based in the United Arab Emirates, working closely with client staff to provide technical support and oversight for installed systems and equipment. Responsibilities include monitoring system performance, diagnosing and resolving technical issues, coordinating preventive and corrective maintenance, and ensuring compliance with safety and quality standards. The Resident Engineer will review technical documentation and drawings, support installation and commissioning activities, and provide guidance to technicians and operators. The role also involves preparing reports, documenting incidents and resolutions, and communicating regularly with both client stakeholders and ATS FZE’s engineering team. The Resident Engineer is expected to build strong working relationships, proactively identify improvement opportunities, and help optimize system reliability and efficiency.<br>Qualifications<br> Strong foundation in engineering (such as mechanical, electrical, or instrumentation), with the ability to interpret technical drawings, specifications, and manuals. Experience in installation, commissioning, operation, and maintenance of industrial or commercial systems, equipment, or machinery. Proficiency in diagnostic and troubleshooting techniques, including the use of relevant tools, test equipment, and software. Knowledge of safety standards, regulations, and best practices in an industrial or engineering environment, with a commitment to safe work procedures. Effective communication and interpersonal skills for collaborating with client teams, technicians, and internal stakeholders. Ability to document work clearly, prepare technical reports, and maintain accurate records of maintenance activities and system performance. Organizational and time-management skills, with the capacity to prioritize tasks and manage multiple service requests at an on-site location. Relevant engineering degree or diploma, or equivalent technical qualification; professional certifications in maintenance or reliability engineering are an advantage. Prior experience in a resident or site-based engineering role, ideally within the United Arab Emirates or regional industrial sectors, is beneficial. Willingness to adhere to client policies, adapt to changing operational requirements, and continuously update

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong><u>About the Role</u></strong> We are looking for a motivated and detail-oriented Estimation / Pre-Sales Engineer to join our growing ELV team. This role is ideal for candidates who enjoy technical sales support, estimation, and client interaction without the pressure of sales targets. The successful candidate will support the sales team by preparing technical solutions, quotations, and project documentation while ensuring excellent customer service and timely project coordination.</p><p><strong><u>Key Responsibilities</u></strong></p><ol><li><p>Understand client requirements and recommend suitable ELV system solutions.</p></li><li><p>Prepare ELV system designs and technical proposals based on project specifications.</p></li><li><p>Assist the sales team with technical and commercial support.</p></li><li><p>Prepare quotations, BOQs, technical submittals, and other sales documentation.</p></li><li><p>Coordinate with internal teams for product selection, pricing, and project requirements.</p></li><li><p>Provide technical support and respond to customer inquiries promptly.</p></li><li><p>Maintain accurate documentation, reports, and sales records.</p></li><li><p>Follow up on inquiries and ensure timely submission of proposals.</p></li><li><p>Build and maintain strong relationships with clients and business partners.</p></li><li><p>Ensure compliance with company policies, procedures, and quality standards.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Minimum 1 year of experience in ELV systems, technical sales, estimation, trading, or distribution. Fresh graduates with relevant educational qualifications and a strong interest in ELV systems are encouraged to apply.</p></li><li><p>Basic understanding of ELV systems such as Intercom, Access Control, CCTV, Structured Cabling, Public Address, or related systems.</p></li><li><p>Knowledge of the UAE market and local business practices is an advantage.</p></li><li><p>Excellent communication, presentation, and interpersonal skills.</p></li><li><p>Strong organizational and documentation skills. Self-motivated, responsible, and able to work effectively in a team environment.</p></li><li><p>Proficiency in Microsoft Office applications (Excel, Word, Outlook).</p></li></ol><br><p><strong><u>Preferred Qualifications</u></strong></p><ol><li><p>Bachelor’s degree in electrical, Electronics, Telecommunications, or a related engineering field.</p></li><li><p>Experience in ELV estimation or Pre-Sales support is an added advantage.</p></li><li><p>Candidates with good communication skills in Hindi, English, Malayalam, or Tamil will be preferred.</p></li></ol><br><p><strong><u>What We Offer</u></strong></p><ol><li><p>Competitive fixed salary</p></li><li><p>Performance-based incentives</p></li><li><p>UAE Employment Visa</p></li><li><p>Medical Insurance and other benefits</p></li><li><p>Professional, supportive, and friendly work environment</p></li><li><p>Career growth and learning opportunities</p></li></ol><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job MEP Engineer – SPA Division (Hydrothermal &amp; Wellness Systems) <p><strong>Job Title – MEP Engineer – SPA Division (Hydrothermal &amp; Wellness Systems)</strong><br> <strong>Location:</strong> Dubai, UAE</p><br> About the Role <p>We are seeking an experienced and technically strong <strong>MEP Engineer – SPA Division (Hydrothermal &amp; Wellness Systems)</strong> to manage the engineering, coordination, installation, testing, and commissioning of MEP systems associated with spas, wellness facilities, hydrothermal areas, and specialized wet environments.</p><br> <p>The role will involve working on <strong>steam rooms, saunas, hammams, experience showers, hydrotherapy systems, pools, Jacuzzis, water features, treatment areas, and associated mechanical, electrical, plumbing, HVAC, and control systems</strong>. The ideal candidate will have strong MEP project experience with exposure to spa, wellness, hospitality, luxury residential, swimming pool, or specialized wet-area projects.</p><br> Key Responsibilities MEP Engineering &amp; Design <ul> <li> Review and develop MEP designs for spa, wellness, hydrothermal, and wet-area installations. </li> <li> Prepare and review technical drawings, layouts, schematics, equipment schedules, and material specifications. </li> <li> Coordinate mechanical, electrical, plumbing, HVAC, drainage, water treatment, and control systems. </li> <li> Ensure MEP designs meet project requirements, applicable standards, and manufacturer specifications. </li> <li> Review equipment selections and ensure compatibility with overall system requirements. </li> </ul> Hydrothermal &amp; Wellness Systems <ul> <li> Provide technical support for installation of <strong>saunas, steam rooms, hammams, experience showers, hydrotherapy systems, Jacuzzi systems, and other wellness equipment</strong>. </li> <li> Coordinate heating, steam generation, water circulation, filtration, drainage, and ventilation systems. </li> <li> Review hydraulic requirements including flow rates, pressure, pipe sizing, pumps, valves, and water circulation. </li> <li> Coordinate specialist equipment connections with electrical, plumbing, HVAC, and BMS systems. </li> <li> Ensure appropriate waterproofing, drainage, ventilation, and humidity-control requirements are incorporated. </li> </ul> Project Execution <ul> <li> Manage MEP activities from design development through installation, testing, commissioning, and handover. </li> <li> Coordinate with contractors, subcontractors, consultants, suppliers, and site teams. </li> <li> Monitor installation progress and ensure work is executed according to approved drawings and specifications. </li> <li> Conduct regular site inspections and identify technical issues or installation deviations. </li> <li> Ensure MEP works are completed within project timelines and quality requirements. </li> </ul> HVAC &amp; Environmental Systems <ul> <li> Coordinate HVAC requirements for high-humidity and temperature-controlled environments. </li> <li> Ensure appropriate ventilation and air-exchange requirements for steam rooms, saunas, hammams, and wet areas. </li> <li> Coordinate dehumidification systems and condensation-control measures. </li> <li> Review temperature, humidity, and air-quality requirements for wellness environments. </li> <li> Coordinate HVAC interfaces with architectural and specialist wellness systems. </li> </ul> Plumbing, Drainage &amp; Water Systems <ul> <li> Review domestic water, hot water, drainage, and specialist water-system requirements. </li> <li> Coordinate pool, hydrotherapy, Jacuzzi, and wellness equipment water connections. </li> <li> Ensure appropriate drainage slopes, floor drains, traps, and overflow systems. </li> <li> Coordinate water-treatment and filtration equipment connections. </li> <li> Monitor pressure testing, flushing, balancing, and system commissioning. </li> </ul> Electrical &amp; Controls Coordination <ul> <li> Coordinate electrical requirements for specialist spa and wellness equipment. </li> <li> Review equipment loads, power requirements, isolators, control panels, and cable requirements. </li> <li> Coordinate BMS, automation, sensors, timers, thermostats, and control interfaces. </li> <li> Ensure electrical installations are suitable for wet and high-humidity environments. </li> <li> Coordinate emergency, safety, and isolation requirements with the electrical team. </li> </ul> Testing &amp; Commissioning <ul> <li> Prepare and oversee testing and commissioning plans for MEP and hydrothermal systems. </li> <li> Conduct functional testing of pumps, heaters, steam generators, HVAC systems, controls, and specialist equipment. </li> <li> Verify flow rates, temperatures, pressures, humidity levels, and system performance. </li> <li> Coordinate equipment commissioning with manufacturers and specialist suppliers. </li> <li> Prepare commissioning records, testing reports, snag lists, and handover documentation. </li> </ul> Quality, Safety &amp; Compliance <ul> <li> Ensure all MEP installations comply with approved designs, project specifications, and applicable UAE standards. </li> <li> Monitor quality of materials, workmanship, and installation practices. </li> <li> Identify technical and safety risks associated with wet-area and hydrothermal installations. </li> <li> Ensure appropriate electrical safety and equipment protection in wet environments. </li> <li> Support inspections, authority approvals, consultant inspections, and project handovers. </li> </ul> Technical &amp; Commercial Support <ul> <li> Review technical submittals, shop drawings, method statements, and material submissions. </li> <li> Assist with BOQs, equipment schedules, technical specifications, and procurement requirements. </li> <li> Coordinate with suppliers to evaluate equipment specifications and technical compliance. </li> <li> Identify design clashes and propose cost-effective engineering solutions. </li> <li> Provide technical support during project execution and resolve site engineering issues. </li> </ul> Qualifications &amp; Experience <ul> <li> Bachelor's Degree in <strong>Mechanical Engineering, Electrical Engineering, MEP Engineering</strong>, or a related discipline. </li> <li> <strong>5–8 years of MEP engineering experience</strong>, preferably within spa, wellness, hospitality, swimming pool, luxury residential, or specialized wet-area projects. </li> <li> Strong hands-on experience with HVAC, plumbing, drainage, water systems, and specialist MEP installations. </li> <li> Experience with <strong>hydrothermal systems, steam rooms, saunas, hammams, hydrotherapy, pools, or wellness equipment</strong> is highly preferred. </li> <li> Strong knowledge of MEP coordination, shop drawings, technical submittals, testing, and commissioning. </li> <li> Knowledge of UAE building regulations and relevant international MEP standards. </li> <li> Experience working with consultants, contractors, specialist suppliers, and project teams in the UAE. </li> </ul> Key Skills &amp; Competencies <ul> <li> MEP engineering and coordination </li> <li> Hydrothermal and spa systems </li> <li> HVAC and dehumidification </li> <li> Plumbing and drainage </li> <li> Water circulation and treatment systems </li> <li> Steam, sauna and hammam systems </li> <li> Swimming pool and hydrotherapy systems </li> <li> Electrical and BMS coordination </li> <li> Testing and commissioning </li> <li> AutoCAD and MEP design software </li> <li> Technical drawings and specifications </li> <li> Project execution and site supervision </li> <li> Quality control and HSE compliance </li> <li> Strong troubleshooting and problem-solving skills </li> <li> Excellent communication and stakeholder management </li> </ul> What We Offer <ul> <li> Competitive salary and benefits package </li> <li> Opportunity to work on premium spa, wellness, hospitality, and luxury projects </li> <li> Exposure to specialized hydrothermal and wellness technologies </li> <li> Professional and technically diverse working environment </li> <li> Career growth and development opportunities </li> <li> Opportunity to work on high-end wellness installations across the UAE and wider region </li> </ul> <p><strong>Apply now!</strong></p><br> <br> <br> </div>

<p>Core Responsibilities </p><p>Oversee project execution, including installation, wiring checks & field device integration as per project schedules. </p><p>Conduct Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), commissioning & final system handovers. </p><p>Coordinate with main contractors, consultants, and internal teams for technical submittals, approvals & project execution. </p><p>Maintain project documentation, including project logs, operation manuals, point schedules & progress reports.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications & Ski</p><p>lls Bachelor's Degree or Diploma in Electrical, Electronics, Mechanical Engineering, or Automation. </p><p>4–8 years of hands-on experience in BMS, HVAC Controls or ELV Systems. </p><p>Strong knowledge of communication protocols such as BACnet & Modbus. </p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Implement and manage CI/CD pipelines to automate software delivery and ensure fast, reliable releases.</li><li>Collaborate with development teams to enhance system architecture for performance and scalability.</li><li>Monitor application and infrastructure performance, troubleshooting issues proactively to maintain uptime.</li><li>Manage container orchestration platforms like Kubernetes to streamline deployment processes.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Computer Science, Engineering, or related field, providing a strong technical foundation.</p></li><li><p>5 years of relevant work experience in software development, systems administration, or similar roles.</p></li><li><p>Certifications such as AWS Certified DevOps Engineer or Docker Certified Associate to validate expertise.</p></li><li><p>Experience with scripting languages like Python, Bash, or Ruby to automate tasks efficiently.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Specialist Process Engineer – Offshore Water Injection Project<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;<span>Job Title: Specialist</span><span> Process Engineer</span> </u></b><b><u><span>– Offshore Water Injection Project</span></u></b></p><br><br><p>KBR Abu Dhabi PMC Team is currently looking to fill a position of <b><u>Specialist Process Engineer </u></b>for an <b>Offshore Project </b>to be based in UAE ( Abu Dhabi) as soon as the administrative processes are completed, will then relocate to <b>Spain Office</b> and then return to Abu Dhabi<b>&nbsp;. </b></p><br><br><p><b>Job Purpose</b></p><br><br><p>The Specialist Process Engineer is responsible for providing advanced process engineering expertise for the design, modification, integration, and commissioning of offshore water injection facilities. The role ensures safe, reliable, and efficient process design and operation while supporting brownfield modifications and maintaining compliance with client specifications, industry standards, and regulatory requirements.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Process Engineering &amp; Design</b></p><br><br><ul><li>Lead process engineering activities for offshore water injection systems and associated facilities.</li><li>Develop and review Process Flow Diagrams (PFDs), Piping &amp; Instrumentation Diagrams (P&amp;IDs), Process Design Basis, and Engineering Calculations.</li><li>Perform hydraulic calculations, equipment sizing, process simulations, and system performance evaluations.</li><li>Review and optimize water injection system design for efficiency, reliability, and operability.</li><li>Support process optimization and debottlenecking studies.</li></ul><p><b>Safety &amp; Risk Management</b></p><br><br><ul><li>Participate in HAZID, HAZOP, SIL, LOPA, and other process safety studies.</li><li>Ensure compliance with company process safety management requirements.</li><li>Conduct process risk assessments and provide mitigation measures.</li><li>Support Management of Change (MOC) activities for brownfield modifications.</li></ul><p><b>Engineering Coordination</b></p><br><br><ul><li>Coordinate with multidisciplinary teams including Mechanical, Piping, Instrumentation, Electrical, and Operations.</li><li>Provide technical support during detailed engineering, procurement, construction, and commissioning phases.</li><li>Review vendor documents and technical proposals.</li><li>Resolve process engineering issues arising during project execution.</li></ul><p><b>Brownfield &amp; Offshore Support</b></p><br><br><ul><li>Perform feasibility studies and brownfield engineering assessments.</li><li>Support tie-in engineering and shutdown planning activities.</li><li>Evaluate existing offshore facilities for integration of new water injection systems.</li><li>Conduct offshore site surveys and technical reviews when required.</li></ul><p><b>Commissioning &amp; Operations Support</b></p><br><br><ul><li>Develop process commissioning procedures.</li><li>Support pre-commissioning, commissioning, startup, and performance testing activities.</li><li>Troubleshoot process upsets and operational challenges.</li><li>Assist operations teams in achieving production and injection targets.</li></ul><br><p><b>Required Qualifications</b></p><br><br><ul><li>Bachelor's Degree in Chemical Engineering or Process Engineering.</li><li>Master's Degree is an added advantage.</li><li>Chartered Engineer (CEng) or equivalent professional registration preferred.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>15 – 18 years of process engineering experience in Oil &amp; Gas projects.</li><li>Minimum 5 years in offshore brownfield projects.</li><li>Strong experience in offshore water injection facilities and produced water systems.</li><li>Proven involvement in FEED, Detailed Engineering, EPC, Commissioning, and Start-up phases.</li><li>ADNOC Offshore or Middle East project experience highly preferred.</li></ul><br><p><b>Technical Competencies</b></p><br><br><ul><li>Water Injection System Design</li><li>Produced Water Treatment</li><li>Process Simulation (HYSYS, Aspen Plus)</li><li>Hydraulic Analysis</li><li>Relief and Flare System Design</li><li>Process Safety Management (PSM)</li><li>HAZOP / SIL / LOPA Studies</li><li>Brownfield Engineering</li><li>Offshore Facility Modifications</li><li>Commissioning &amp; Startup Support</li></ul><br><p><b>Software Skills</b></p><br><br><ul><li>Aspen HYSYS</li><li>Aspen Plus</li><li>PipeSim</li><li>Flarenet</li><li>HTRI</li><li>PipeFlow</li><li>MS Office Suite</li></ul><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We're hiring a <strong>Desktop Support Engineer</strong> to provide first- and second-line IT support to end users at our office. You'll handle hardware/software troubleshooting, device setup, and general end-user technical support to keep our teams productive.</p><p>Key Responsibilities</p><ul><li><p>Provide desk-side and remote support for laptops, desktops, printers, and peripherals</p></li><li><p>Install, configure, and maintain Windows/macOS operating systems and standard business applications</p></li><li><p>Manage user accounts, permissions, and access via Active Directory / Google Workspace / M365</p></li><li><p>Troubleshoot network connectivity issues (Wi-Fi, VPN, LAN) for end users</p></li><li><p>Set up new hire equipment and manage IT asset lifecycle (issue, return, disposal)</p></li><li><p>Log, track, and resolve tickets within SLA using [ticketing system]</p></li><li><p>Escalate unresolved issues to Level 2/3 support or vendors as needed</p></li><li><p>Maintain documentation of common issues and resolutions (knowledge base)</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>[2–4] years of experience in desktop/end-user IT support</p></li><li><p>Strong knowledge of Windows 10/11 (macOS a plus), Microsoft Office/365, basic networking</p></li><li><p>Experience with ticketing tools (ServiceNow, Freshservice, Zendesk, or similar)</p></li><li><p>Good communication and customer service skills — comfortable working directly with non-technical staff</p></li><li><p>Basic hardware troubleshooting (RAM, HDD/SSD swaps, peripherals)</p></li><li><p>Certifications such as CompTIA A+, ITIL Foundation are a plus</p></li><li><p>English proficiency [add local language requirement if applicable]</p></li></ul><p>What We Offer</p><ul><li><p>[Salary/benefits — health insurance, transport, etc.]</p></li><li><p>Career growth path toward Systems Administration / Network Engineering</p></li><li><p>Supportive, collaborative IT team environment</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking a highly skilled Senior Payments Engineer (Cards &amp; Cards Acquiring) to join a leading enterprise banking technology team in Dubai.<br> Operating within the Software Engineering Chapter, this role is dedicated to the end-to-end delivery, orchestration, and production support of our critical Business Platforms &amp; Payments infrastructure.<br> As a Senior Payments Engineer, you will own the technical delivery of strategic Cards Platform projects, major enhancements, and Business-As-Usual (BAU) demands.<br> This role requires a strong engineering background in credit/debit card processing systems, merchant/acquiring solutions, and high-performance payment switch integrations, working seamlessly within fast-paced Agile squads.<br> Key Responsibilities1.<br> Product Engineering &amp; Lifecycle Management Drive end-to-end technical delivery for card platforms, managing complex requirement analysis, systems design, and seamless third-party vendor integrations.<br> Lead technical execution across card lifecycle initiatives, including enhancements to payment processing, clearing, settlement, and chargeback workflows.<br> Collaborate actively within cross-functional Agile squads to translate business requirements into highly secure, stable, and scalable payment solutions.<br> 2. Cards Acquiring &amp; Payment Systems Integration Design and maintain robust components supporting the Cards Acquiring ecosystem, merchant processing frameworks, and payment gateways.<br> Oversee system integrations with global card schemes (e.<br>g., Visa, Mastercard) and regional payment networks, ensuring strict compliance with financial standards.<br> Support continuous improvement initiatives to enhance transaction success rates, lower latency, and modernize merchant onboarding platforms.<br> 3. Testing, Release &amp; Production Stability Provide advanced technical oversight during system integration testing (SIT) and user acceptance testing (UAT), quickly resolving critical engineering defects.<br> Coordinate complex code release management activities, ensuring zero-downtime deployments across highly regulated payment platform environments.<br> Act as a Tier-3 escalation point for production support, driving rapid incident management, root-cause analysis (RCA), and continuous platform stability.<br> Technical Specifications &amp; SkillsCore Cards &amp; Payments Expertise (Essential) Cards Domain: Comprehensive technical knowledge of Cards Issuing or Cards Acquiring platform engineering.<br> Acquiring Systems: Solid hands-on experience with merchant processing, POS/mPOS terminals, e-commerce payment gateways, and clearing/settlement protocols.<br> Financial Protocols: Deep understanding of messaging standards and payment switch protocols (e.<br>g., ISO 8583 , AS2805, or EMV compliance frameworks).<br> Core Engineering: Strong database skills (SQL/Oracle) and experience with backend application frameworks used to build high-throughput, low-latency transaction processing services.<br> Engineering &amp; Framework Practices Strong experience working inside Agile/Scrum software delivery environments.<br> Familiarity with enterprise ticketing and defect tracking systems (e.<br>g., Jira, ServiceNow).<br> Understanding of security and compliance frameworks mandatory in payment card industries (e.<br>g., PCI-DSS ).<br> Qualifications &amp; Experience Education: Bachelor’s or Master’s degree in Computer Science, Software Engineering, Information Technology, or a strictly equivalent technical discipline.<br> Experience: Proven track record in a Senior Software or Product Engineering role explicitly focused on Cards and Payments systems within a Bank, Fintech, or Payment Service Provider (PSP).<br> Soft Skills: Exceptional analytical and debugging capabilities, a proactive problem-solving mindset, and the interpersonal skills necessary to coordinate effortlessly between business units and core engineering teams.<br></span> </div>