وظائف مهندس تفتيش هندسي في الإمارات

We are seeking an experienced Safety Engineer to support Health, Safety and Environment (HSE) activities within a luxury yacht manufacturing and shipyard environment.<br><br>The Safety Engineer will be responsible for implementing and monitoring workplace safety standards across yacht construction, assembly, outfitting, testing and commissioning activities. The role requires strong practical knowledge of shipyard hazards, including hot work, confined-space entry, work at height, lifting operations, FRP/composite production, painting and chemical handling, electrical work and heavy equipment operations.<br><br>The successful candidate will work closely with Production, Engineering, Quality, Facilities, subcontractors and project teams to maintain a safe working environment and ensure compliance with applicable HSE regulations and company procedures.<br><br>Key Responsibilities2. Permit-to-Work & High-Risk Activities<br><br> Shipyard & Yacht Production Safety Monitor HSE compliance across yacht construction, production, assembly and outfitting areas Conduct routine safety inspections of workshops, production halls, vessels, docks and other shipyard work areas Identify unsafe conditions, unsafe acts and potential hazards and ensure timely corrective actions Provide HSE support during hull construction, structural assembly, machinery installation, interior outfitting, testing and commissioning Ensure safe working practices are followed by employees, contractors and subcontractors<br><br>Manage and monitor Permit-to-Work (PTW) requirements for activities including:<br><br>Hot work, welding, cutting and grinding Confined-space entry Work at height and scaffolding Lifting and rigging operations Electrical isolation / Lockout-Tagout (LOTO) Painting and chemical handling Pressure testing and commissioning activities<br><br>Verify that appropriate risk assessments, control measures, PPE and emergency arrangements are in place before high-risk activities begin.4. Risk Assessment & HSE Compliance5. Incident Investigation & Corrective Actions6. Lifting, Machinery & Equipment Safety7. Fire & Emergency Safety8. Safety Training & Culture<br><br> FRP, Composite & Chemical Safety Monitor safety during FRP lamination, resin mixing, bonding, sanding, grinding and composite fabrication Ensure safe storage, handling and disposal of resins, catalysts, solvents, paints, adhesives and other hazardous chemicals Review Safety Data Sheets (SDS) and ensure appropriate chemical-control measures Monitor ventilation and PPE requirements in composite, painting and enclosed production areas Support controls for dust, fumes, VOCs and other occupational exposure risks Prepare and review Risk Assessments, Job Safety Analyses (JSA/JHA) and Method Statements Conduct workplace hazard identification and risk assessments Ensure compliance with applicable UAE HSE regulations, fire and civil defence requirements, company HSE procedures and relevant maritime/shipyard safety standards Maintain HSE documentation, inspection records, permits and compliance reports Support internal and external HSE audits Investigate accidents, incidents, near misses and unsafe conditions Conduct root-cause analysis and recommend preventive and corrective actions Track corrective actions through closure Prepare incident investigation reports and safety statistics Identify recurring safety trends and recommend improvements to management Monitor lifting operations involving cranes, forklifts, mobile equipment, chain blocks and other lifting devices Verify lifting plans, equipment certification and competency of operators and rigging personnel where required Inspect machine guarding and safe use of production machinery and power tools Monitor safe movement of large yacht components, machinery and structural sections within production areas Conduct fire-prevention inspections throughout production and vessel areas Ensure availability and accessibility of firefighting and emergency equipment Support emergency-response plans and evacuation procedures Participate in fire, evacuation, confined-space rescue and other emergency drills Ensure escape routes and emergency exits remain unobstructed Conduct HSE inductions for employees, contractors and visitors Deliver toolbox talks and safety awareness sessions Coach supervisors and production personnel on safe working practices Promote reporting of hazards, near misses and unsafe conditions Support initiatives to strengthen the overall safety culture within the shipyard<br><br>Requirements<br><br>Qualifications & Experience<br><br>Bachelor's degree or diploma in Safety Engineering, Occupational Health & Safety, Engineering or a related technical discipline NEBOSH IGC, IOSH, OSHA or equivalent recognized HSE certification is preferred Typically 3-5+ years of HSE/Safety experience, preferably within yacht building, shipbuilding, ship repair, marine construction or a comparable heavy manufacturing environment Practical experience with Permit-to-Work systems, risk assessments, incident investigations and site inspections Experience supervising high-risk activities such as hot work, confined-space entry, work at height and lifting operations<br><br>Preferred Yacht / Marine Industry Experience<br><br>Candidates with direct experience in the following environments will be strongly preferred:<br><br>Luxury yacht or superyacht manufacturing Shipbuilding or ship repair yards Marine fabrication and construction FRP/composite manufacturing Yacht outfitting and commissioning Marine engineering or offshore fabrication<br><br>Benefits<br><br>What We Offer:<br><br> Competitive salary and benefits package Opportunity to work on innovative and sustainable projects Supportive and growth-oriented work environment Exposure to international standards and advanced technologies

<p>• Ensure fabrication processes comply with relevant codes, specifications, and project requirement • Prepare QC Procedures, Inspection Test Plan (ITP) and maintain QAQC documentations • Prepare Visual Inspection Reports, Weld History Sheets, and other QC documents for piping fabrication. • Perform or supervise incoming material inspection, Fit-up and dimensional inspections, welding inspection, and pressure testing • Plan and schedule the NDT activities, verify NDT results, and ensure that defects are evaluated / repaired as per applicable codes • Develop and qualify WPS/PQR in accordance with ASME Sec IX, AGES Specifications & AWS D1.1 • Ensure inspection, measuring, and test equipment (IMTE) are regularly calibrated and traceable to national standards • Coordinate with Authorized Inspector (AI) and Client Inspector during hold and witness points for inspections • Identify and report non-conformances during fabrication or inspection & follow up on corrective and preventive actions (CAPA). • Support readiness for ASME and ISO Audits</p><p>Qualification required: • Bachelor Degree in Mechanical / Production Engineering • Minimum 4 years’ experience in a QA/QC role in ASME pressure vessels, piping and structural fabrication • Proficient in Microsoft Office • CSWIP 3.1 certificate is required • Strong knowledge in ASME, API and AWS codes • UAE Driving license(added advantage) • BGAS Grade Level II (added advantage) • Audit experience in ASME/ISO Audits (added advantage)</p>

<p>The Senior Plant (Workshop) Engineer is responsible for overseeing the maintenance, repair, servicing, and operational readiness of the Company's fleet of construction plant, machinery, and heavy equipment. The role ensures maximum equipment availability, reliability, and cost efficiency while supporting project operations through effective workshop management and preventive maintenance programs.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Manage the day-to-day operations of the central workshop, ensuring timely maintenance and repair of construction equipment.</p></li><li><p>Plan and implement preventive and corrective maintenance programs for heavy equipment, plant, and vehicles.</p></li><li><p>Monitor equipment utilization, availability, downtime, and productivity to support project requirements.</p></li><li><p>Coordinate equipment mobilization and demobilization between projects.</p></li><li><p>Supervise workshop personnel, technicians, mechanics, and subcontractors to ensure safe and efficient operations.</p></li><li><p>Prepare maintenance schedules, technical reports, equipment condition assessments, and performance analyses.</p></li><li><p>Monitor maintenance costs, spare parts inventory, and workshop budgets while identifying cost-saving opportunities.</p></li><li><p>Ensure compliance with Company HSE policies, manufacturer recommendations, and applicable statutory regulations.</p></li><li><p>Coordinate the erection, dismantling, inspection, and certification of tower cranes, passenger hoists, and other lifting equipment in accordance with safety standards.</p></li><li><p>Liaise with Project Managers and Site Teams to ensure timely availability of equipment and plant resources.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications</strong></p><ul><li><p>Bachelor's Degree in <strong>Mechanical Engineering</strong> (preferred) or a related engineering discipline.</p></li><li><p>Professional certifications related to heavy equipment or maintenance management will be an advantage.</p></li></ul><p><strong>Experience</strong></p><ul><li><p><strong>Minimum 10–15 years of relevant UAE/GCC experience</strong> in plant maintenance, workshop operations, and heavy construction equipment.</p></li><li><p>Previous experience with a <strong>leading construction or contracting company</strong> is mandatory.</p></li><li><p>Strong experience managing heavy equipment, including:</p><ul><li><p>Tower Cranes</p></li><li><p>Passenger Hoists</p></li><li><p>Excavators</p></li><li><p>Cranes</p></li><li><p>Wheel Loaders</p></li><li><p>Generators</p></li><li><p>Air Compressors</p></li><li><p>Batching Plants</p></li><li><p>Crushers</p></li><li><p>Marine Equipment (preferred)</p></li></ul></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently inviting expressions of interest for a Specialist Integrity Engineer to join our team in Abu Dhabi. This is a client secondment role supporting one of our major energy sector clients, with an assignment duration of three years.</p><br><p>The Specialist Integrity Engineer will provide subject matter expertise in asset integrity management, risk-based inspection and fitness-for-service assessment, supporting the development and implementation of integrity management programmes across a large and complex portfolio of onshore oil and gas facilities.</p><br><p>The role will focus on the delivery of integrity assessments, integrity operating windows, risk-based inspection methodologies, asset life extension studies and specialist technical investigations to support the safe, reliable and efficient operation of client assets.</p><br><p>The successful candidate will work as part of an integrated client team, providing technical leadership, mentoring engineering personnel and ensuring alignment with international best practice and industry standards.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.</strong></p><br><p>Our Technical Consulting and Decarbonization teams combine consultancy solutions with technical expertise to support our client’s capital investment decisions across the global energy and materials markets.</p><br><p>From&nbsp;advisory&nbsp;(front end studies, concept design and strategic planning) to&nbsp;design&nbsp;(FEED, detailed design and owner’s engineer) through to&nbsp;delivery&nbsp;(project management consulting), we lead our clients to the best possible outcomes. Not forgetting our world-leading subsea,&nbsp;decarbonisation,&nbsp;new energies, asset optimization and technology development expertise, our ability to add value to our clients' portfolios and projects knows no bounds.</p><br><p><strong>What we can offer</strong></p><br><ul> <li><strong>Meaningful and interesting projects:&nbsp;</strong>Delivered to high profile clients across the Energy Sector</li> <li><strong>Commitment to Diversity and Inclusion:&nbsp;</strong>We are an organisation actively committed to diversity and inclusion across our business&nbsp;</li> <li><strong>Competitive renumeration packag</strong>e:&nbsp;With regular reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance: Ensures inpatient, </strong>and outpatient medical care is available should you require treatment</li> <li><strong>Group Life and Personal Accident Insurance:</strong> The company provides Life Assurance cover</li> <li><strong>End of Service Gratuity:</strong>&nbsp;In line with UAE Labor Law, all employees are eligible for an End of Service benefit</li> <li><strong>The Employee Share Plan:</strong> Gives you the opportunity to purchase Wood shares and receive a match from the company</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ service of our employees at 5 year service milestones</li> <li>Commitment to continued professional development:&nbsp;Development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Energy Transition Academy:</strong>&nbsp;Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field</li></ul><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><ul> <li>Lead the development and implementation of asset integrity management programmes for client operating assets.</li> <li>Provide specialist technical expertise in Risk-Based Inspection (RBI), Fitness-for-Service (FFS), asset life assessment and integrity management.</li> <li>Lead the development and enhancement of RBI methodologies and associated risk models.</li> <li>Support the development and implementation of Integrity Operating Windows (IOW) programmes.</li> <li>Perform and review Fitness-for-Service (FFS) assessments in accordance with recognised industry standards.</li> <li>Lead technical studies including root cause analysis (RCA), life extension studies and integrity assessments.</li> <li>Facilitate technical workshops, integrity reviews and stakeholder engagement sessions with client personnel.</li> <li>Review degradation mechanisms, risk assessments and inspection strategies for fixed equipment, piping and associated facilities.</li> <li>Develop technical reports, corporate procedures, manuals and engineering recommendations.</li> <li>Provide mentoring and technical guidance to engineers and integrity personnel.</li> <li>Support implementation of recommendations and monitoring of integrity performance.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</p><br><p><strong>Expected:&nbsp;</strong></p><br><ul> <li>Bachelor's Degree in Mechanical Engineering, Materials Engineering, Chemical Engineering, Metallurgy or related discipline.</li> <li>Master's Degree or PhD preferred.</li> <li>API 571 and API 580 certifications.</li> <li>API 510, API 570 and/or API 653 certifications preferred.</li> <li>ISO 55001 Asset &nbsp;Management awareness/implementation training.</li> </ul><p>Personal attributes:</p><br><ul> <li>Strong technical leadership capability.</li> <li>Excellent analytical and problem-solving skills.</li> <li>Effective communicator with strong client-facing experience.</li> <li>Safety-focused with commitment to technical excellence.</li> <li>Self-motivated and capable of working within multidisciplinary teams.</li> <li>Strong mentoring and coaching capability.</li></ul><p>Knowledge, Skills and Experience:</p><br><ul> <li>Minimum 15 years' experience in integrity engineering, inspection or asset integrity management within oil and gas, petrochemical or related process industries, including at least 5 years in a specialist or technical authority role.</li> <li>Demonstrated experience developing and implementing integrity management frameworks, risk assessment methodologies and inspection strategies.</li> <li>Extensive experience delivering Risk-Based Inspection (RBI) programmes and integrity assessments.</li> <li>Practical experience conducting or reviewing Fitness-for-Service (FFS) assessments in accordance with API 579.</li> <li>Demonstrated experience developing Integrity Operating Windows (IOW) and inspection planning strategies.</li> <li>Strong understanding of degradation mechanisms affecting pressure equipment, piping systems and infrastructure assets.</li> <li>Familiarity with major regional operators' standards, procedures and asset integrity practices is highly desirable.</li> <li>Previous experience supporting National Oil Companies (NOCs), major international operators or large operating assets in the Middle East preferred.</li> <li>Excellent technical writing, presentation and stakeholder management skills.</li></ul> </div>

Work with Us. Change the World.<br><br>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.<br><br>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.<br><br>We're one global team driven by our common purpose to deliver a better world. Join us.<br><br>Job Description<br><br>Requirements:<br><br>We are looking for an experienced Senior Engineer – Roads to join our infrastructure project team in Abu Dhabi.<br><br>Key Responsibilities:<br><br>Supervise and monitor road construction works to ensure compliance with approved drawings, specifications, method statements, ITPs, and project requirements. Manage and coordinate day-to-day road construction activities, including earthworks, subgrade, subbase, road base, asphalt works, kerbs, footpaths, paving, road markings, and associated works. Review Contractor submissions, including shop drawings, method statements, material submittals, RFIs, and technical proposals. Monitor construction progress, quality, workmanship, and compliance with approved project requirements. Conduct site inspections and review Inspection Requests to ensure works are completed in accordance with approved documents and specifications. Coordinate with surveyors to verify setting out, levels, alignment, grades, and road profiles. Monitor earthworks, compaction, field density testing, asphalt works, and other required quality control and testing activities. Coordinate road works with wet utilities, electrical, telecom, drainage, street lighting, landscaping, and other infrastructure services. Identify technical issues, construction risks, and potential delays and coordinate appropriate corrective actions. Review and provide technical recommendations on construction methods and proposed solutions. Monitor the Contractor’s compliance with approved method statements, ITPs, quality requirements, and safety procedures. Coordinate with the Contractor, Authorities, and other stakeholders to resolve construction and technical issues. Monitor testing and inspection activities and ensure required approvals are obtained prior to proceeding with subsequent works. Maintain proper records of site inspections, progress, technical issues, and construction activities. Participate in progress, technical, and coordination meetings with the Contractor and project stakeholders. Support the Resident Engineer in managing and supervising road construction activities. Ensure health, safety, environmental, and quality requirements are properly implemented throughout the works. <br><br>Qualifications<br><br>Bachelor’s Degree in Civil Engineering or related field. Experience in road and infrastructure projects. Knowledge of earthworks, pavements, asphalt, kerbs, footpaths, paving, and road markings. Minimum 10 years of site supervision, inspection, and quality control experience. Familiarity with drawings, specifications, method statements, ITPs, and testing requirements. Experience coordinating with utilities and other infrastructure disciplines. UAE infrastructure and authority experience preferred. Strong communication, coordination, and problem-solving skills. Ability to work effectively in a multidisciplinary team. <br><br>Additional Information<br><br>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.<br><br>About AECOM<br><br>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.<br><br>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.<br><br>What Makes AECOM a Great Place To Work<br><br>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.<br><br>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Petrofac is a leading international service provider to the energy industry, with a diverse client portfolio including many of the world’s leading energy companies.</strong></span></span><br>&nbsp;</p><br><p><span><span>We design, build, manage and maintain infrastructure for our clients. We recruit, reward, and develop our people based on merit regardless of race, nationality, religion, gender, age, sexual orientation, marital status or disability. We value our people and treat everyone who works for or with Petrofac fairly and without discrimination.</span></span><br>&nbsp;</p><br><p><span><span>The world is re-thinking its energy supply and energy security needs; planning for a phased transition to alternative energy sources. We are here to help our clients meet these evolving energy needs.</span></span><br><span><span>This is an exciting time to join us on this journey.</span></span><br>&nbsp;</p><br><p><span><span>We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week.</span></span><br>&nbsp;</p><br><p><span><i><span><strong>Are you ready to bring the right energy to Petrofac and help us deliver a better future for everyone?</strong></span></i></span><br>&nbsp;</p><br><p><span><span><strong>JOB TITLE: SR. ENGINEER - QUALITY (PIPING &amp; VALVES)</strong></span></span><br>&nbsp;</p><br><p><span><span><strong>KEY RESPONSIBILITIES:</strong></span></span></p><br><ul><li><p><span><span>Review procurement documents to ensure that quality requirement have been correctly translated into purchase requisitions and design documents.</span></span></p><br></li><li><p><span><span>List procurement inspection criticality rating for various items and vendor quality requirements.</span></span></p><br></li><li><p><span><span>Review of purchase orders to ensure that the applicable requirements are met.</span></span></p><br></li><li><p><span><span>Review of suppler ITPs, WPS, Procedures etc. against contract requirements.</span></span></p><br></li><li><p><span><span>Develop project specific QCP/ITP/ITRs for both supplier and site QMS.</span></span></p><br></li><li><p><span><span>Coordinate with Completion team to set up PetroPCS.</span></span></p><br></li><li><p><span><span>Attendance at pre-inspection meetings.</span></span></p><br></li><li><p><span><span>Compilation of vendor inspection assignments packages.</span></span></p><br></li><li><p><span><span>Support to conduct supplier capability assessment as assigned.</span></span></p><br></li><li><p><span><span>Control of on-site and off-site vendor inspectors.</span></span></p><br></li><li><p><span><span>Coordination and resolution of any nonconforming product Reviewing vendors QA/QC systems in accordance with contractual requirements.</span></span></p><br></li><li><p><span><span>Coordination of vendor quality approvals when required.</span></span></p><br></li><li><p><span><span>Coordinate with discipline engineers and Supplier engineers on establishing project specific quality criteria.</span></span></p><br></li><li><p><span><span>Ensure the verification of documentation and certificates for materials purchased by suppliers.</span></span></p><br></li><li><p><span><span>Review supplier inspection procedures and personnel qualifications.</span></span></p><br></li><li><p><span><span>Review supplier material certificates.</span></span></p><br></li><li><p><span><span>Take part in shop inspections and surveillances.</span></span></p><br></li><li><p><span><span>Coordinate with the company’s discipline engineers for the resolution of technical discrepancies.</span></span></p><br></li><li><p><span><span>Coordinate with management for quality improvements.</span></span></p><br></li><li><p><span><span>Issue of non-conformance reports and track all non-conformance reports.</span></span></p><br></li><li><p><span><span>Coordinate with the owner’s representative on all procurement issues.</span></span></p><br></li><li><p><span><span>Coordinate all inspection requirements</span><span>for TPI inspectors.</span></span></p><br></li><li><p><span><span>Verify product for its compliance to approved data sheets drawings, witness testing as approved by ITP.</span></span></p><br></li><li><p><span><span>Produce necessary inspection report and release notes.</span></span></p><br></li><li><p><span><span>Monitor progress of all purchase requisitions.</span></span></p><br></li><li><p><span><span>Assure resolution of all issues raised during inspection/test. Where applicable, Provide recommendations for possible solutions.</span></span></p><br></li><li><p><span><span>Coordinate with concerned parties, review and ensure timely delivery of MRBs based on approved MRB index.</span></span></p><br></li><li><p><span><span>Provide technical inputs for vendor queries, conformance reports and non-conformance reports.</span></span></p><br></li><li><p><span><span>Integrate with and work alongside the quality team and perform all related tasks as and when requested by the supervisor.</span></span></p><br></li><li><p><span><span>Provide key technical assistance to suppliers on writing and executing test approvals and final reports.</span></span><br>&nbsp;</p><br></li></ul><p><span><span><strong>ESSENTIAL QUALIFICATIONS AND SKILLS:</strong></span></span></p><br><ul><li><p><span><span>Degree/Diploma in Mechanical Engineering or equivalent.</span></span></p><br></li><li><p><span><span>Must have a thorough working knowledge of International Codes and Standards, specifically ASME and API Codes/practices, and specifications associated with all types of static equipment and piping.</span></span></p><br></li><li><p><span><span>Familiar with International codes and standards.</span></span></p><br></li><li><p><span><span>Minimum 10 years’ experience in relevant discipline.</span></span></p><br></li><li><p><span><span>Should have experience in oil &amp; gas/petrochemical industry.</span></span></p><br></li><li><p><span><span>Should have previously worked with major EPC contractor.</span></span></p><br></li></ul> Additional Information <br> <br> <br> </div>

<p>The construction industry in Dubai offers an opportunity for an experienced Senior Civil Engineer to oversee technical activities, coordinate site teams, and ensure civil works are completed according to project specifications, quality standards, and schedules.</p> <p>Key Responsibilities<br /> Supervise and coordinate civil construction activities.<br /> Review drawings, specifications, and project requirements.<br /> Monitor site progress, workmanship, and construction quality.<br /> Coordinate with contractors, consultants, engineers, and site teams.<br /> Check materials, measurements, and completed works.<br /> Identify technical issues and coordinate appropriate solutions.<br /> Monitor project schedules and report progress or delays.<br /> Ensure compliance with health, safety, and site procedures.<br /> Prepare technical reports, site records, and progress updates.<br /> Support inspections, testing, and project handover activities.</p> <p>Candidates may send CVs to Email: tanisgloballlc@gmail.com</p>

<p>The construction industry in Dubai offers an opportunity for an experienced Senior Civil Engineer to oversee technical activities, coordinate site teams, and ensure civil works are completed according to project specifications, quality standards, and schedules.</p> <p>Key Responsibilities<br /> Supervise and coordinate civil construction activities.<br /> Review drawings, specifications, and project requirements.<br /> Monitor site progress, workmanship, and construction quality.<br /> Coordinate with contractors, consultants, engineers, and site teams.<br /> Check materials, measurements, and completed works.<br /> Identify technical issues and coordinate appropriate solutions.<br /> Monitor project schedules and report progress or delays.<br /> Ensure compliance with health, safety, and site procedures.<br /> Prepare technical reports, site records, and progress updates.<br /> Support inspections, testing, and project handover activities.</p> <p>Candidates may send CVs to Email: tanisgloballlc@gmail.com</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Lead the civil engineering design for OHTL projects ranging from 33kV to 500kV (or higher as applicable).</li><li>Design and review tower foundations, pile foundations, raft foundations, chimney foundations, and retaining structures.</li><li>Perform structural analysis and foundation calculations considering geotechnical reports, wind loads, seismic loads, uplift forces, and tower reactions.</li><li>Review and approve civil engineering calculations, design reports, and construction drawings.</li><li>Coordinate with tower designers regarding foundation loading data.</li><li>Ensure compliance with IEC, ASCE, ACI, BS, Eurocodes, and project specifications.</li><li>Review survey reports, topographical data, and geotechnical investigations.</li><li>Prepare material take-offs (MTOs) and bill of quantities (BOQs).</li><li>Optimize foundation designs to achieve cost-effective engineering solutions.</li><li>Coordinate with electrical, structural, geotechnical, procurement, construction, and planning teams.</li><li>Participate in engineering review meetings with clients and consultants.</li><li>Resolve technical queries and provide engineering support during construction.</li><li>Review vendor documents and subcontractor engineering submissions.</li><li>Support procurement activities by reviewing technical specifications and vendor offers.</li><li>Provide technical assistance during excavation, reinforcement, concrete works, and foundation construction.</li><li>Conduct site visits to resolve engineering issues.</li><li>Review non-conformance reports (NCRs) and propose corrective actions.</li><li>Ensure construction activities comply with approved drawings and quality standards.</li><li>Support testing, inspection, and project commissioning activities.</li><li>Ensure compliance with project Quality Management Systems (ISO 9001).</li><li>Follow HSE requirements in accordance with company policies and client standards.</li><li>Support implementation of risk assessments and engineering safety reviews.</li><li>Prepare engineering reports and technical documentation.</li><li>Review method statements and inspection test plans (ITPs).</li><li>Maintain engineering records and revision control.</li><li>Submit weekly and monthly engineering progress reports.</li></ul> <ul><li>8–12 years of civil engineering experience.</li><li>Minimum 5 years of experience in EPC power transmission projects.</li><li>Proven experience in Overhead Transmission Line (OHTL) projects.</li><li>Experience with foundations for lattice towers and monopoles.</li><li>Familiarity with projects ranging from 132kV to 500kV is preferred.</li><li>Experience working with international clients and consultants.</li></ul> </div>

<ul><li><p>Assist in the execution and supervision of electrical works for power projects, substations, and associated infrastructure.</p></li><li><p>Review approved electrical drawings, single-line diagrams, schematics, cable schedules, equipment layouts, and technical specifications.</p></li><li><p>Coordinate electrical activities with civil, structural, mechanical, MEP, protection, control, and commissioning teams.</p></li><li><p>Supervise installation of transformers, switchgear, circuit breakers, GIS/AIS equipment, CTs, PTs/CVTs, isolators, busbars, panels, and auxiliary systems.</p></li><li><p>Ensure electrical installation activities are carried out in accordance with approved drawings, specifications, method statements, ITPs, and project requirements.</p></li><li><p>Assist in reviewing electrical shop drawings, material submittals, technical documents, and vendor documentation.</p></li><li><p>Coordinate with procurement and stores teams to ensure timely availability of approved electrical materials and equipment.</p></li><li><p>Supervise cable laying, cable tray installation, cable termination, jointing, tagging, and testing activities.</p></li><li><p>Assist in installation of earthing and lightning protection systems, including earth grids and equipment earthing.</p></li><li><p>Supervise installation of AC/DC auxiliary systems, battery chargers, batteries, UPS systems, lighting, small power, and station-service systems.</p></li><li><p>Coordinate with protection and control teams for installation of protection panels, control panels, metering systems, and associated wiring.</p></li><li><p>Assist with SCADA, RTU, communication, automation, and substation control system interfaces.</p></li><li><p>Monitor site progress and ensure electrical activities are completed according to project schedules and milestones.</p></li><li><p>Coordinate with subcontractors, vendors, consultants, clients, and site teams to resolve technical and construction issues.</p></li><li><p>Raise and follow up RFIs, technical queries, inspection requests, and site-related technical matters.</p></li><li><p>Conduct regular site inspections to verify installation quality, workmanship, and compliance with approved drawings.</p></li><li><p>Coordinate with QA/QC teams for inspections, testing, and closure of NCRs, punch points, and inspection observations.</p></li><li><p>Assist in testing and commissioning activities, including insulation resistance, continuity, cable testing, equipment testing, functional testing, and protection system testing.</p></li><li><p>Coordinate with testing and commissioning teams during pre-commissioning, energization, and final handover activities.</p></li><li><p>Ensure electrical works comply with applicable IEC standards, UAE regulations, utility requirements, project specifications, and client standards.</p></li><li><p>Monitor electrical material usage, manpower, productivity, and equipment utilization.</p></li><li><p>Assist in quantity verification, material take-offs, variations, additional works, and material requirements.</p></li><li><p>Identify electrical installation risks, technical issues, and interface constraints and escalate them for timely resolution.</p></li><li><p>Ensure compliance with project HSE procedures, electrical safety requirements, risk assessments, LOTO, and permit-to-work systems.</p></li><li><p>Participate in technical coordination meetings, progress meetings, and site inspections.</p></li><li><p>Prepare daily and weekly progress reports and maintain relevant engineering and construction records.</p></li><li><p>Maintain documentation including approved drawings, inspection records, test reports, material certificates, commissioning records, and as-built information.</p></li><li><p>Assist in snagging, rectification, testing, commissioning, energization, and project handover.</p></li><li><p>Provide technical support to supervisors, technicians, subcontractors, and junior site personnel.</p></li><li><p>Support continuous improvement in electrical installation quality, productivity, safety, and project execution.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Electrical Engineering or a related discipline.</p></li><li><p>Typically 3–7 years of relevant electrical engineering/construction experience, preferably within power, substations, EPC, transmission, distribution, or infrastructure projects.</p></li><li><p>Good knowledge of electrical systems, equipment, installation practices, testing, and commissioning.</p></li><li><p>Exposure to transformers, switchgear, GIS/AIS equipment, circuit breakers, CTs, PTs/CVTs, isolators, busbars, and electrical panels.</p></li><li><p>Ability to read and interpret single-line diagrams, schematic diagrams, wiring diagrams, cable schedules, layouts, and technical specifications.</p></li><li><p>Knowledge of cable installation, termination, earthing, lightning protection, and auxiliary power systems.</p></li><li><p>Basic understanding of protection and control, metering, SCADA, automation, and communication systems.</p></li><li><p>Knowledge of electrical testing and commissioning procedures.</p></li><li><p>Familiarity with IEC standards, UAE electrical regulations, utility requirements, and project specifications.</p></li><li><p>Experience coordinating with consultants, clients, subcontractors, vendors, and multidisciplinary project teams.</p></li><li><p>Understanding of QA/QC procedures, inspection requirements, method statements, and ITPs.</p></li><li><p>Good knowledge of electrical safety, LOTO, permit-to-work, and safe working practices.</p></li><li><p>Proficiency in MS Office and relevant engineering/project documentation tools.</p></li><li><p>Strong communication, coordination, analytical, and problem-solving skills.</p></li><li><p>Ability to work on site and manage multiple activities within project timelines.</p></li><li><p>UAE/GCC project experience is preferred.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in HV/EHV substations, transmission and distribution projects, utility infrastructure, or major EPC projects.</p></li><li><p>Exposure to GIS/AIS substations, transformers, protection and control systems, SCADA, and substation automation.</p></li><li><p>Experience in electrical testing and commissioning will be an advantage.</p></li><li><p>Familiarity with DEWA, TAQA/TRANSCO, or other UAE utility/client requirements.</p></li><li><p>Experience working with major EPC contractors, engineering consultants, and utility clients.</p></li><li><p>Relevant electrical engineering certification or professional membership will be an advantage.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job LEAD DISCIPLINE ENGINEER (FIELD) - ELECTRICAL <p>We are looking for a highly experienced Lead Discipline Engineer (Field) – Electrical to oversee and support all field electrical engineering activities on a major onshore oil and gas project. The successful candidate will ensure that electrical installation, testing, energization, and commissioning activities are executed safely, efficiently, and in compliance with project specifications, applicable codes, and client requirements.</p><br><p><strong>JOB RESPONSIBILITIES</strong></p><br> <ul> <li> Lead and supervise all onshore electrical field engineering activities during construction, pre-commissioning, and commissioning phases </li> <li> Ensure electrical installation works are executed in accordance with approved drawings, project specifications, applicable codes, and client requirements </li> <li> Coordinate with construction, engineering, QA/QC, commissioning, and operations teams to resolve field electrical engineering issues </li> <li> Review and provide technical support for electrical installation, cable routing, equipment installation, testing, energization, and field design changes </li> <li> Monitor construction progress and ensure compliance with project schedules, safety requirements, and quality standards </li> <li> Review and approve field technical queries (TQs), site instructions, method statements, and engineering change requests </li> <li> Provide technical guidance on electrical systems, power distribution, substations, transformers, switchgear, grounding, and lighting installations </li> <li> Participate in site inspections, walkdowns, punch list clearance, and final acceptance activities </li> <li> Liaise with the client, EPC teams, subcontractors, and other stakeholders on all electrical field engineering matters</li></ul><p><strong>KEY QUALIFICATIONS</strong></p><br> <ul> <li> Bachelor's degree in Electrical Engineering or equivalent Engineering discipline </li> <li> Minimum 15–20 years of experience in electrical engineering, with significant experience in onshore field engineering for oil and gas projects </li> <li> Proven track record on large-scale onshore oil and gas, gas processing, or petrochemical projects </li> <li> Strong expertise in electrical installation, construction support, testing, energization, mechanical completion, and commissioning activities </li> <li> Thorough knowledge of international electrical codes and standards including IEC, IEEE, NFPA, and relevant client specifications </li> <li> Experience with ADNOC onshore projects is strongly preferred </li> <li> Strong leadership, coordination, and multidisciplinary communication skills </li> <li> Familiarity with engineering documentation, field engineering procedures, and construction management practices</li></ul><p>VERTICAL</p><br> <p>ENGINEERING</p><br> <br> <br> </div>

Technical Engineer - Snr (MEP) – UAEAre you an experienced MEP Technical Engineer with the expertise to manage complex technical deliverables, coordinate multidisciplinary interfaces, and resolve engineering challenges across major construction projects?<br>ALEMCO is looking for a Senior Technical Engineer (MEP) who can provide advanced technical support, ensure the accuracy and quality of engineering outputs, and bridge the gap between design requirements and practical site execution.<br>Who We are? ALEC Holdings PJSC, part of the Investment Corporation of Dubai (ICD), is a leading GCC construction group with over two decades of success delivering some of the region’s most complex and high-profile projects. As a proudly publicly listed company, ALEC continues to raise the bar for quality, innovation, and excellence in construction, driving iconic developments that shape skylines across the Middle East.<br>In the UAE, ALEC has delivered many of the nation’s most iconic developments, operating as a fully integrated contractor through specialist business units that provide end-to-end construction solutions.<br>ALEMCO provides integrated MEP and facilities services that power some of the region’s most ambitious developments. From electrical systems to long-term maintenance, we focus on technical reliability and sustainable performance - supported by an inclusive and skilled team with a passion for engineering excellence.<br>Why Join Us? As a Senior Technical Engineer (MEP) at ALEMCO, you will play a key role in delivering complex technical activities and ensuring that engineering outputs are accurate, practical, and aligned with project and business requirements.<br>You will work within a technically driven environment that values engineering precision, effective coordination, quality, continuous improvement, and professional development. Your expertise will directly contribute to the safe and successful delivery of complex MEP projects.<br>Your Role Reporting to the Technical Manager, you will provide advanced technical expertise within your assigned area of responsibility. You will review and coordinate engineering deliverables, resolve complex technical issues, support quality and inspection activities, and guide technical personnel to ensure effective project delivery.<br>You may also oversee technical teams and processes, supporting team development and ensuring that project objectives are achieved.<br>Key Responsibilities Engineering & Technical Coordination Review MEP drawings, specifications, BOQs, and ensure technical compliance Coordinate with consultants and subcontractors for drawing approvals Prepare and review technical submittals, material approvals, and compliance matrices Support method statement preparation and technical documentation Design & Site Interface Assist in resolving technical clashes and interface issues Support BIM coordination and interdisciplinary alignment Conduct site inspections to ensure installation aligns with approved drawings Monitor technical deviations and implement corrective actions Procurement & Material Support Provide technical evaluation of vendors and materials Support procurement team with technical clarifications Ensure long-lead items are technically aligned with project requirements Testing, Commissioning & Handover Support pre-commissioning and commissioning activities Ensure systems comply with performance specifications Assist in preparation of as-built documentation and O&M manuals Reporting & Documentation Maintain technical logs, trackers, and engineering registers Prepare technical reports and progress updates Support client meetings with engineering presentations where required<br>What We’re Looking For Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or another relevant engineering discipline. Minimum seven years of relevant MEP engineering experience. Advanced technical knowledge of MEP systems and their integration within complex construction projects. Strong experience in reviewing drawings, specifications, technical submittals, material submissions, and compliance documentation. Proven ability to investigate and resolve complex technical and coordination issues. Strong understanding of construction sequencing, site execution, quality requirements, and multidisciplinary coordination. Experience coordinating with consultants, subcontractors, suppliers, and project-delivery teams. Ability to guide engineers and technical personnel and oversee assigned processes or deliverables. Proficiency in Microsoft Word, Excel, and Power Point. Excellent written and verbal communication skills. Strong problem-solving, review, assessment, and stakeholder-coordination capabilities. Ability to work effectively within fast-track and technically demanding project environments. Highly Preferred Experience with Auto CAD, Revit, Navisworks, or other relevant engineering and BIM tools. Experience in data centres, infrastructure, or large-scale commercial projects. Middle East construction experience. Exposure to testing, commissioning, and project handover processes. Experience working on consultant-driven projects. Experience in technical planning, risk assessment, documentation, and reporting. Previous experience supervising or guiding engineers and technical teams.<br><br>What We Offer The chance to contribute to some of the UAE's most iconic projects. A collaborative, supportive environment that values innovation and excellence. Opportunities for professional growth and career progression.<br>Ready to plan the path to project success? If you have the advanced MEP expertise to manage complex technical deliverables, resolve engineering challenges, and ensure quality from design coordination through to project handover, we want to hear from you.<br>Apply today and be part of something excellent! Please note we encourage you to apply as soon as possible, as this advert may close once we’ve found the right candidate. Although we can’t respond to every application, we want to thank you for taking the time to apply and for considering a future with us.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p>We are seeking an experienced Structural Engineer to join our Construction Supervision team, overseeing the delivery of villa developments and residential communities. The successful candidate will be responsible for ensuring all structural works are executed in accordance with the contract documents, approved drawings, project specifications, applicable codes, and quality standards.</p><br><p>Working closely with the Resident Engineer and multidisciplinary site team, the Structural Engineer will monitor construction activities, review contractor submissions, inspect structural works, and ensure safe, compliant, and high-quality project delivery from foundation works through to handover.</p><br><p><strong>Responsibilities:</strong></p><br><ul><li>Supervise all structural construction activities for villa developments, ensuring compliance with approved drawings, specifications, contract requirements, and applicable local authority regulations.</li><li>Conduct regular site inspections of excavation, foundations, reinforced concrete, structural steel (where applicable), retaining walls, and other structural elements.</li><li>Review and provide technical comments on shop drawings, reinforcement detailing, material submittals, method statements, and Requests for Information.</li><li>Verify reinforcement installation, concrete placement, formwork, post-tensioning (where applicable), and structural connections prior to construction activities.</li><li>Witness inspections and testing of structural materials including concrete, reinforcement steel, grout, and other structural components.</li><li>Monitor contractor workmanship and ensure compliance with project quality plans, Inspection and Test Plans, and health and safety requirements.</li><li>Identify construction issues and coordinate with architects, MEP engineers, geotechnical specialists, contractors, and other stakeholders to resolve technical and interface challenges.</li><li>Prepare site inspection reports, non-conformance reports, site instructions, and monitor timely close-out of corrective actions.</li><li>Review progress against the project and highlight potential risks or delays affecting structural works.</li><li>Verify completed structural works for interim payment applications and provide recommendations to the Resident Engineer.</li><li>Participate in coordination meetings, progress reviews, technical workshops, and client meetings as required.</li></ul><br>Qualifications<br><ul><li>Bachelor's Degree in Civil or Structural Engineering.</li><li>Minimum 7–12 years of professional experience, with at least 5 years in construction supervision of villa developments, residential communities, or low-rise building projects.</li><li>UAE or GCC construction supervision experience is highly preferred.</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

<p>seeking a proactive The QA/QC Engineer who’ll be responsible for implementing, monitoring, and maintaining the Quality Management System across infrastructure construction and maintenance projects, including bridges, highways, roads, and tunnels. The role ensures that all construction activities, materials, workmanship, and documentation comply with contract specifications, project requirements, applicable standards, and regulatory requirements. </p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor’s degree in engineering - Civil / Mechanical</p><p>Minimum of 3-5 years of experience as QAQC</p><p>Engineer in highway projects, bridge construction, infrastructure works, road maintenance projects ...etc.</p><p>Strong knowledge of engineering standards and construction processes.</p><p>Familiarity with health, safety and quality standards and regulations.</p><p>Documentation and reporting</p><br><p>KEY RESPONSIBILITIES Implement and maintain the project quality plan in accordance with the company's Quality Management System. Ensure compliance with ISO requirements, project specifications, client requirements, and applicable international and local standards. Develop, review, and update Inspection and Test Plans (ITPs), Method Statements, and quality procedures. Conduct quality induction and awareness sessions for project personnel. Perform inspections of construction activities including earthworks, pavement works, bridge structures, tunnel works, drainage systems, utility works, concrete works, asphalt works, and structural steel works. Coordinate material inspections, sampling, and field testing. Verify that construction materials comply with approved specifications before use. Witness and document inspections and testing activities. Prepare, review, and maintain quality documentation including but not limited to inspection requests, MIRs, test reports, material approvals, quality records, method statements, handover documentation..etc. Identify quality issues and raise NCRs. Coordinate with construction team, consultants, and clients regarding quality matters. Attend site inspections, progress meetings, and quality review meetings. </p><p>TECHNICAL KNOWLEDGE & SKILLS</p><p>Familiar with earthworks, asphalt paving, precast structures, tunnel construction, drainage & utility works...etc. Thorough understanding of infrastructure construction methodologies. Effective communication and interpersonal skills. Experience working with government authorities, consultants and major EPC contractors. </p>

*Job Description – Design Engineer – Automotive Manufacturing Company*<br><br>Position:* Design Engineer Industry:* Automotive Manufacturing Location:* Dubai, UAESalary:* AED 3,000 – 4,000 + Benefits Experience:* 1 – 2 Years Employment Type:* Full Time / On-site<br><br>*Job Summary*<br><br>We are hiring a *Design Engineer* for a leading Automotive Manufacturing Company in *Dubai, UAE*. Candidate should have hands-on experience in Sheet Metal Design and Automotive Components design using CATIA & Solid Works.<br><br>*Key Responsibilities*<br><br> Design and develop automotive parts, components, and sheet metal assemblies using *CATIA & Solid Works* Create accurate 3D models, 2D detailed drawings, and BOM Apply sheet metal design concepts, fabrication and manufacturing process knowledge Work as per customer requirements and technical specifications Perform basic design calculations and ensure DFM/DFA compliance Coordinate with production and quality team for prototype development and approval Modify existing designs for cost and quality improvements Maintain proper design documentation and records<br><br>*Requirements*<br><br> Diploma / B. E / http://B. Tech in Mechanical Engineering *1 to 2 Years of experience as Design Engineer in Automotive / Sheet Metal Industry* Good working knowledge of *CATIA & Solid Works – Mandatory* Good exposure to *Sheet Metal Design & Automotive Design* Knowledge of GD&T, materials, and manufacturing processes Ability to read and interpret complex engineering drawings Immediate joiners preferred Salary & Benefits:* AED 3,000 – 4,000 + Benefits as per UAE Labour Law<br><br>Location: Dubai, UAE<br><br>Immediate joiners are preferred.<br><br>Contact us at +91 9791033506<br><br>botim calls at +91 9791033506<br><br>Whats App us at +91 9791033506<br><br>Skills: catia,automotive,sheet metal,manufacturing,solidworks,design,3d,metal,components,salary

<p>Key Responsibilities</p><ul><li><p>Implement and monitor the Project Environmental Management Plan (EMP).</p></li><li><p>Ensure compliance with UAE environmental regulations and client environmental requirements.</p></li><li><p>Conduct routine environmental inspections and site audits.</p></li><li><p>Monitor air quality, dust, noise, wastewater, and waste management activities.</p></li><li><p>Ensure proper segregation, storage, transportation, and disposal of hazardous and non-hazardous waste.</p></li><li><p>Monitor fuel, oil, and chemical storage areas to prevent spills and environmental contamination.</p></li><li><p>Investigate environmental incidents, identify root causes, and recommend corrective and preventive actions.</p></li><li><p>Maintain environmental records, inspection reports, waste manifests, permits, and monitoring logs.</p></li><li><p>Coordinate with HSE, construction, QA/QC, and project teams to ensure environmental compliance.</p></li><li><p>Conduct environmental awareness training and toolbox talks for site personnel.</p></li><li><p>Assist during client, consultant, and regulatory environmental audits.</p></li><li><p>Monitor compliance with erosion control, sediment control, dust suppression, and pollution prevention measures.</p></li><li><p>Support sustainability initiatives and recommend environmental improvements.</p></li><li><p>Prepare daily, weekly, and monthly environmental reports for management and clients. These responsibilities align with common UAE construction and EPC environmental engineering practices.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Bachelor's Degree in Environmental Engineering, Environmental Science, Civil Engineering, or related discipline.</p></li><li><p>Minimum <strong>3–5 years</strong> of environmental experience in construction projects.</p></li><li><p>UAE construction project experience preferred.</p></li></ol><p>Interested candidates can share their cv to <strong>+971 52 519 1490 - Bhuvana</strong></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Monitor the HSE’ performance and practices to ensure that Group Companies operations and plant assets are operating safely and in accordance with the HSE standards, policies and procedures. Act as a focal point for HSE management systems’ implementation, while providing with the needful support for the respective functions and personnel.&nbsp; Provide with recommendations and feedback to ensure proper resolution of incidents, and the implementation of HSE development projects.</p><br><br><br>Job Specific Accountabilities <br><p>•&nbsp;&nbsp; &nbsp;Review reports, feedback and inputs by Group Companies to ensure aligned and timely support for any HSE related matter.<br>•&nbsp;&nbsp; &nbsp;Monitor the HSE compliance and performance, and participate to complex and high-impact HSE inspection’ activities to ensure compliance with HSE standards and procedures; i.e. for equipment installation, asset and facilities operations starting, loading, offloading, and shutting down…etc.<br>•&nbsp;&nbsp; &nbsp;Provide Support; facilitate understanding and communication of HSE Management System and COPs for ADNOC and Group Companies.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Revise purchasing standards to ensure equipment and material purchased meet applicable safety codes and conform to the latest technology.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Contribute to the development of safety programs and ensures the availability of safety manuals, hazardous area instructions, safety materials, safety publications and posters, etc. recommends improvements for areas of unsafe working conditions.<br>•&nbsp;&nbsp; &nbsp;Prepare and update the safety inspection checklists and schedules for surveying Group Companies facilities for assessment of hazards and pinpointing corrective actions.&nbsp;<br>•&nbsp;&nbsp; &nbsp;In line with HSE technical experts, participate in HSE related studies; such as HSE Impact Assessment, HAZOP, HAZID, Root Cause Analysis, Risk Assessment, etc.<br>•&nbsp;&nbsp; &nbsp;Audit, review and assess the deployed projects, initiatives and recent updates to ensure sustainable and continuous development.<br>•&nbsp;&nbsp; &nbsp;Analyse accidents and recommends actions required to minimize recurrence. And follow up on the implementation of the recommendation(s) to ensure HSE barriers in place, until close-out report issuance.<br>•&nbsp;&nbsp; &nbsp;Investigate, or participate, as per HSE management instructions, in the investigation for accidents to enable the forthcoming decision-making.<br>•&nbsp;&nbsp; &nbsp;Participate in reviewing and amend accordingly the Company’s Audit and Management of Contractors Procedures.<br>•&nbsp;&nbsp; &nbsp;Participate in the implementation of level 2 internal audits, including self-assessed audits conducted at site level.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Participate in the implementation of level 3 audits conducted at the corporate level</p><br><br><br>Minimum Qualification <br><p>Bachelor Degree in Safety, Industrial Engineering, or any related engineering fields.</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>•&nbsp;&nbsp; &nbsp;6 years of experience, including at least 3 years as Safety or HSE Engineer.<br>•&nbsp;&nbsp; &nbsp;Experience in HSE project implementation, HSE inspection, and HSE systems.<br>•&nbsp;&nbsp; &nbsp;Experience in all or at least one of the following fields: Drilling, Operations, Construction, Petrochemicals and refinery</p><br><br><br>Professional Certifications <br><p>•&nbsp;&nbsp; &nbsp;ISO 9001<br>•&nbsp;&nbsp; &nbsp;NEBOSH / NIOSH NPG<br>•&nbsp;&nbsp; &nbsp;ISO 14001 / RC<br>•&nbsp;&nbsp; &nbsp;ISO 27000</p><br><br><br><br><br> </div>

<p>Waterproofing Engineer – Job Vacancy</p><p><strong>Position:</strong> Waterproofing Engineer<br><strong>Location:</strong> UAE<br><strong>Employment Type:</strong> Full-Time<br><strong>Experience:</strong> 2–5 years in waterproofing / construction field</p><p>Job Description</p><p>We are looking for an experienced <strong>Waterproofing Engineer</strong> to join our team. The candidate will be responsible for supervising waterproofing works, coordinating with site teams and contractors, ensuring proper application of waterproofing systems, and maintaining project quality standards.</p><p>Key Responsibilities</p><ul><li><p>Supervise and monitor waterproofing works at project sites.</p></li><li><p>Inspect surfaces and ensure proper preparation before waterproofing application.</p></li><li><p>Coordinate with consultants, contractors, site engineers, and workers.</p></li><li><p>Ensure waterproofing materials are applied according to technical specifications and manufacturer recommendations.</p></li><li><p>Conduct site inspections and identify defects, leakage, or application issues.</p></li><li><p>Prepare site reports, inspection reports, and work progress updates.</p></li><li><p>Ensure compliance with project specifications, safety requirements, and quality standards.</p></li><li><p>Provide technical support and recommend suitable waterproofing systems for different applications.</p></li><li><p>Coordinate material requirements with the sales/procurement team.</p></li><li><p>Attend site meetings and resolve technical issues related to waterproofing.</p></li></ul><p>Requirements</p><ul><li><p>Diploma or Bachelor’s Degree in Civil Engineering / Construction or a related field.</p></li><li><p><strong>2–5 years of UAE/GCC experience in waterproofing or construction.</strong></p></li><li><p>Good knowledge of waterproofing systems, materials, and application methods.</p></li><li><p>Experience with <strong>PU, cementitious, bituminous, acrylic, epoxy, and other waterproofing systems</strong> is an advantage.</p></li><li><p>Ability to read drawings and understand project specifications.</p></li><li><p>Good communication and coordination skills.</p></li><li><p>Must have UAE Driving License.</p></li><li><p>Candidates available in the UAE will be preferred.</p></li></ul><p>Salary & Benefits</p><p><strong>Salary:</strong> depending on experience and qualifications.<br>Other benefits will be provided as per UAE labour law and company policy.</p><p><strong>How to Apply:</strong><br>Interested candidates can send their <strong>CV</strong> with the subject <strong>“Waterproofing Engineer – Application”</strong>.</p><p><strong>Desired Candidate Profile</strong></p><p>Age B/W 20 to 35yo Male</p>

<p>Ø Oversee day-to-day site activities for interior fit-out works. Ø Ensure work aligns with approved drawings and specifications. Ø Interface with designers, contractors, vendors, and clients. Ø Monitor workmanship and material standards. Ø Enforce health and safety protocols on-site. Ø Ensure all fit-out activities follow safety regulations. Ø Report unsafe practices or incidents and enforce corrective actions. Ø Coordinate with the subcontractor to avoid interface problems and maximize work quality. Ø Maintain daily site reports including labor, material usage, and progress. Ø Understand and interpret architectural, structural, and MEP drawings. Ø Ensure red-line drawings are updated as per site modifications. Ø Maintain site records, progress reports, and inspection logs. Ø Contribute to building an on-site work culture based on best practices in safety, cleaning, work quality, and waste management. Ø Supervise all interior fit-out activities including joinery, partitions, ceilings, flooring, and MEP installations. Ø Supervise skilled and unskilled labor on-site. Ø Supervise site preparation and dismantling for each activity under his supervision. Ø follow up on the WIR’s, NCR’s and snag lists. Ø Review the project scope of work, including drawings, specifications, quality plans, and project program. Ø Conduct regular site inspections to ensure adherence to design, quality, and safety standards. Ø Coordinate material deliveries and subcontractor schedules to avoid delays. Ø Inspect materials received on site to ensure the workmanship of material compliance with quality standards. Ø Prepare and monitor inspection requests, preliminary execution plans, methodology statements, risk assessments, review sheets, and any other quality requirements. Ø Resolve on-site issues such as design conflicts, material shortages, or labor challenges. Ø Report progress and challenges to project manager, construction manager and clients. Ø Ensure timely completion of works within budget and scope. Ø Approve minor design adjustments in consultation with designers or project managers. Ø Reject substandard work or materials that do not meet project specifications. Ø Direct site labor and subcontractors to ensure productivity and safety. Ø Initiate corrective actions for delays or non-compliance. Ø Sign off on completed work sections for client or consultant inspections. Ø Create an open work environment where employees and foremen can raise questions, discuss them with managers, and manage</p><p><br><br></p><p><strong>Desired Candidate Profile</strong></p><p>· Bachelor’s degree in civil engineering, construction management, architecture or related field. · Minimum 4-5 years of experience in interior fit-out or construction projects · Strong knowledge of AutoCAD and technical drawings · Excellent communication and coordination skills for client and team interactions · Knowledge of Inspection & Test Plans (ITPs), Method Statements (MS), and QA/QC procedures. · Deep understanding of joinery, gypsum works, MEP integration, and finishing materials. · Familiarity with local building regulations, safety codes, and quality benchmarks. · Knowledge of scheduling, budgeting, and resource allocation in interior projects. · Understanding of materials used in luxury interiors, including wood, stone, glass, and fabrics. · Skilled in AutoCAD, MS Project, and possibly Revit or Primavera for planning and documentation. · Leading site teams, motivating workers, and ensuring safety compliance. · Handling unexpected challenges, design changes, or client requests with flexibility. · Representing the company professionally during site visits and meetings. · Excellent organizational and time management skills with the ability to manage multiple tasks simultaneously. · Strong problem-solving and decision-making abilities. · Ability to work under pressure and deliver within tight deadlines. · High attention to detail and commitment to quality. · Professional integrity, fairness, and proactive approach to site challenges</p><p><br><br></p>

<p>Construction and infrastructure projects in Dubai offer an opportunity for a technically capable Site Engineer to coordinate field activities, monitor work progress, and help ensure construction work is completed according to approved drawings, specifications, and project schedules.</p> <p>Key Responsibilities<br /> Supervise and coordinate day-to-day activities at the assigned construction site.<br /> Review drawings, specifications, and work instructions before execution.<br /> Coordinate with foremen, subcontractors, technicians, and site workers.<br /> Monitor construction progress against project schedules and planned milestones.<br /> Inspect completed and ongoing work to ensure required quality standards are maintained.<br /> Identify technical or site-related issues and coordinate appropriate solutions.<br /> Verify that materials delivered to site meet project requirements.<br /> Assist with site measurements, quantity checks, and work inspections.<br /> Coordinate with QA/QC and HSE teams regarding quality and safety requirements.<br /> Maintain daily site records, progress updates, inspection requests, and technical documentation.<br /> Report delays, variations, material requirements, and other site concerns to project management.<br /> Attend coordination meetings and communicate work priorities to site teams.<br /> Ensure construction activities follow approved methods and applicable safety procedures.<br /> Support testing, commissioning, handover, and completion activities when required.<br /> Requirements<br /> Bachelor&#8217;s degree in Civil Engineering, Mechanical Engineering, Electrical Engineering, or a relevant engineering discipline.<br /> Previous site or construction experience is an advantage.<br /> Freshers with relevant engineering qualifications may also apply.<br /> Good understanding of construction processes, technical drawings, and site coordination.<br /> Ability to read and interpret engineering drawings and specifications.<br /> Familiarity with AutoCAD and MS Office is an advantage.<br /> Strong organizational, communication, and problem-solving skills.<br /> Ability to coordinate multiple site activities and meet deadlines.<br /> Good knowledge of quality and workplace safety practices.<br /> Professional approach and ability to work effectively with site teams.<br /> UAE/GCC construction experience is an advantage.</p> <p>Applicants with relevant qualifications may forward their updated CV to the Email: alfayaznaz@gmail.com</p>