وظائف مهندسين - ابو ظبي الإمارات

<p>Position Overview:</p><p>The Site Engineer is responsible for supervising and executing site engineering tasks, performing quantity surveying duties, preparing technical documentation, conducting inspections, and supporting all construction and investigation activities. The role requires strong technical competency, analytical skills, field supervision, and close coordination with project stakeholders to ensure compliance with approved drawings, specifications, and safety standards.</p><p><strong>General Site Engineering & Coordination</strong></p><ul><li><p>Prepare daily, weekly, and monthly site progress reports.</p></li><li><p>Coordinate with the main office for preparation and issuance of shop drawings aligned with site conditions.</p></li><li><p>Supervise and guide Site Foremen based on instructions from the Project Engineer.</p></li><li><p>Communicate daily work activities, priorities, and tasks to the site team.</p></li><li><p>Ensure all activities adhere to approved drawings, method statements, and project specifications.</p></li><li><p>Implement QA/QC procedures and ensure adherence to HSE regulations.</p></li><li><p>Monitor site progress, identify potential delays, and report resource requirements.</p></li><li><p>Track productivity and prepare daily production logs in coordination with the Foreman and Supervisor.</p></li><li><p>Maintain comprehensive document control for all drawings, reports, and site files.</p></li><li><p>Manage and reconcile site petty cash with proper documentation and compliance with company policies.</p></li><li><p>Responsible for correcting daily logs and assigning labor on AMS in accordance with the Project Engineer’s instructions</p></li></ul><p><strong>A.</strong> <strong>Quantity Surveying & Technical Documentation</strong></p><ul><li><p>Prepare BOQs, quantity take-offs, material estimates, and site measurements.</p></li><li><p>Prepare provisional sum submissions as required by project specifications.</p></li><li><p>Prepare steel orders, concrete orders, bar bending schedules (BBS), and steel shop drawings.</p></li><li><p>Develop technical submittals, laboratory test reports, and supporting documentation.</p></li><li><p>Maintain updated as-built drawings throughout construction progress.</p></li><li><p>Prepare IRs, MEP clearance requests, and maintain accurate logs for all submittals.</p></li><li><p>Prepare project close-out documents including permit drawings, approved IRs, lab test results, work permits, final PA reports, TOC, and completion certificates.</p></li></ul><p><strong>B. Inspection, Testing & Quality Control</strong></p><ul><li><p>Prepare and submit Inspection Requests (IRs) and follow up with consultants/clients for approval.</p></li><li><p>Conduct joint surveys with client representatives for new work areas.</p></li><li><p>Verify site readiness for inspections in coordination with the Project Engineer.</p></li><li><p>Prepare internal snag lists and monitor rectification works with the Foreman.</p></li><li><p>Maintain laboratory test logs and follow up for draft and final testing results.</p></li><li><p>Prepare technical submittals related to laboratory testing and quality control requirements.</p></li><li><p>Conduct steel/MEP service scanning and confirm slab thickness prior to execution of related works.</p></li></ul><p><strong>C. Construction Responsibilities</strong></p><ul><li><p>Coordinate with the Foreman and Storekeeper regarding material delivery and availability.</p></li><li><p>Prepare &/or support the preparation of revised and updated shop drawings with the main office.</p></li><li><p>Prepare concrete orders based on daily site requirements.</p></li><li><p>Prepare steel reinforcement detailing, BBS, and structural shop drawings.</p></li><li><p>Ensure accurate execution of architectural, structural, and MEP works in compliance with project specifications.</p></li></ul><p><strong>D. Investigation Work Responsibilities</strong></p><ul><li><p>Prepare indicative test drawings in coordination with the design team and Project Engineer.</p></li><li><p>Perform Non-Destructive Testing (NDT) and Semi-Destructive Testing (SDT) using approved equipment.</p></li><li><p>Extract results from scanning tools and prepare corresponding technical reports.</p></li><li><p>Maintain and update test lists and test matrix sheets based on project needs.</p></li><li><p>Prepare concrete core samples and dust samples; coordinate submission with warehouse and lab teams.</p></li></ul><p><strong>Qualifications & Skills:</strong></p><ul><li><p><em>Bachelor’s Degree in Civil Engineering or Quantity Surveying.</em></p></li><li><p><em>Strong understanding of construction methodologies, testing procedures, and MEP/structural coordination.</em></p></li><li><p><em>Proficiency in AutoCAD, Microsoft Office, and QS software tools.</em></p></li><li><p><em>Strong communication, analytical, and reporting skills.</em></p></li><li><p><em>Ability to work in fast-paced environments and manage multiple tasks.</em></p></li><li><p><em>High attention to detail and excellent document control discipline.</em></p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Structural experience </p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Start-Up Phase</strong></p><ul><li><p>Assist OCM in preparing offshore project deliverables and attending project kick-off and strategy meetings</p></li><li><p>Support development of offshore execution plans, construction schedules, and techno-commercial analyses, considering project milestones and barge availability</p><br></li></ul><p><strong>All Project Phases</strong></p><ul><li><p>Assist OCM in preparing construction aids (load register), marine spread requirements, pipe coating scope, and monitor fabrication/pipe coating progress</p></li><li><p>Review engineering documents, drawings, and analyses from a constructability perspective</p></li><li><p>Support preparation of detailed scopes, schedules, and interface/bridging documents for offshore subcontracted works (excluding diving and NDT), and coordinate technical and commercial evaluations</p></li><li><p>Act as focal point for subcontractor coordination when assigned, monitoring progress and performance</p></li><li><p>Support issuance of Purchase Requisitions for offshore materials not covered by engineering and follow up with procurement on ordering and delivery</p></li><li><p>Coordinate offshore scope activities with all internal departments</p></li><li><p>Attend methods and constructability meetings and review installation procedures, anchor patterns, and drawings</p></li><li><p>Assist in technical evaluation, expediting, receipt, and MRV approval of offshore materials</p></li><li><p>Provide input to weekly and monthly reports and attend client meetings as required</p></li><li><p>Support studies for changes in offshore execution plans, including preparation of bridging documents, micro-schedules, and method statements</p></li><li><p>Liaise with third-party agencies and marine warranty surveyors on marine and construction matters</p></li><li><p>Attend weekly progress meetings with VPOO/OCM and highlight issues and risks</p></li><li><p>Ensure implementation of the project safety plan, company HSEMS, and quality standards</p></li><li><p>Capture lessons learned and best practices and participate in quality audits and closeout actions</p></li><li><p>Initiate offshore variation orders/claims, compile technical inputs, and support assignment of offshore durations</p></li><li><p>Assist in reviewing subcontractor invoices and provide clarifications to finance</p></li><li><p>Prepare and coordinate mobilization plans and support mobilization meetings with marine and field teams</p><br></li></ul><p><strong>Pre-Offshore Phase</strong></p><ul><li><p>Prepare the Risk Assessment Register, attend RA meetings, and circulate consolidated comments to the client and internal stakeholders</p></li><li><p>Prepare job cards for offshore hook-up works and develop detailed micro-schedules and manpower histograms for shutdown activities</p></li><li><p>Prepare JUB specifications for hired marine spread in line with CHOD requirements</p></li><li><p>Coordinate with OPE to ensure readiness and mobilization of all installation aids</p></li><li><p>Ensure timely pre-installation/load-out activities and availability of latest approved offshore documentation onboard.</p></li></ul><p><strong>Offshore Execution Phase</strong></p><ul><li><p>Assist in updating offshore schedules based on progress and resource availability and propose recovery measures for delays</p></li><li><p>Support coordination of subcontractor mobilization/demobilization and performance evaluation</p></li><li><p>Monitor daily offshore operations, attend daily meetings, and coordinate closely with clients, marine, and field teams</p></li><li><p>Conduct HSE audits and safety tours on offshore spreads</p></li><li><p>Interface with project and yard construction teams to maintain load-out dates and offshore continuity</p></li><li><p>Conduct joint walk-throughs on fabricated structures to avoid offshore carry-over</p></li></ul><p><strong>Close-Out Phase</strong></p><ul><li><p>Assist in preparation of offshore final documentation and project close-out reports</p></li><li><p>Review contract documents and drawings to identify constructability issues and variation requirements</p></li><li><p>Support Construction Managers in directing offshore activities, ensuring resource availability, safety compliance, and adherence to contract and ISO requirements</p></li><li><p>Assist in schedule adjustments to manage changes, delays, and contingencies while controlling costs</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in engineering (Preferably Mechanical, Civil, Naval), or equivalent</p></li><li><p>Minimum 10 years' experience in Offshore Construction in Oil &amp; Gas Industry</p></li><li><p>Good commercial, financial and contractual awareness</p></li><li><p>Good negotiation and decision-making skills</p></li><li><p>Excellent spoken and written English language skills</p></li><li><p>Potential managerial skills</p></li><li><p>Excellent communication skills</p></li><li><p>Committed team player/ leader</p></li><li><p>Thorough understanding of offshore operations and equipment.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Start-Up Phase</strong></p><ul><li><p>Assist OCM in preparing offshore project deliverables and attending project kick-off and strategy meetings</p></li><li><p>Support development of offshore execution plans, construction schedules, and techno-commercial analyses, considering project milestones and barge availability</p><br></li></ul><p><strong>All Project Phases</strong></p><ul><li><p>Assist OCM in preparing construction aids (load register), marine spread requirements, pipe coating scope, and monitor fabrication/pipe coating progress</p></li><li><p>Review engineering documents, drawings, and analyses from a constructability perspective</p></li><li><p>Support preparation of detailed scopes, schedules, and interface/bridging documents for offshore subcontracted works (excluding diving and NDT), and coordinate technical and commercial evaluations</p></li><li><p>Act as focal point for subcontractor coordination when assigned, monitoring progress and performance</p></li><li><p>Support issuance of Purchase Requisitions for offshore materials not covered by engineering and follow up with procurement on ordering and delivery</p></li><li><p>Coordinate offshore scope activities with all internal departments</p></li><li><p>Attend methods and constructability meetings and review installation procedures, anchor patterns, and drawings</p></li><li><p>Assist in technical evaluation, expediting, receipt, and MRV approval of offshore materials</p></li><li><p>Provide input to weekly and monthly reports and attend client meetings as required</p></li><li><p>Support studies for changes in offshore execution plans, including preparation of bridging documents, micro-schedules, and method statements</p></li><li><p>Liaise with third-party agencies and marine warranty surveyors on marine and construction matters</p></li><li><p>Attend weekly progress meetings with VPOO/OCM and highlight issues and risks</p></li><li><p>Ensure implementation of the project safety plan, company HSEMS, and quality standards</p></li><li><p>Capture lessons learned and best practices and participate in quality audits and closeout actions</p></li><li><p>Initiate offshore variation orders/claims, compile technical inputs, and support assignment of offshore durations</p></li><li><p>Assist in reviewing subcontractor invoices and provide clarifications to finance</p></li><li><p>Prepare and coordinate mobilization plans and support mobilization meetings with marine and field teams</p><br></li></ul><p><strong>Pre-Offshore Phase</strong></p><ul><li><p>Prepare the Risk Assessment Register, attend RA meetings, and circulate consolidated comments to the client and internal stakeholders</p></li><li><p>Prepare job cards for offshore hook-up works and develop detailed micro-schedules and manpower histograms for shutdown activities</p></li><li><p>Prepare JUB specifications for hired marine spread in line with CHOD requirements</p></li><li><p>Coordinate with OPE to ensure readiness and mobilization of all installation aids</p></li><li><p>Ensure timely pre-installation/load-out activities and availability of latest approved offshore documentation onboard.</p></li></ul><p><strong>Offshore Execution Phase</strong></p><ul><li><p>Assist in updating offshore schedules based on progress and resource availability and propose recovery measures for delays</p></li><li><p>Support coordination of subcontractor mobilization/demobilization and performance evaluation</p></li><li><p>Monitor daily offshore operations, attend daily meetings, and coordinate closely with clients, marine, and field teams</p></li><li><p>Conduct HSE audits and safety tours on offshore spreads</p></li><li><p>Interface with project and yard construction teams to maintain load-out dates and offshore continuity</p></li><li><p>Conduct joint walk-throughs on fabricated structures to avoid offshore carry-over</p></li><li><p>For hook-up scope, coordinate with E&amp;I, commissioning, and project teams to ensure JUB efficiency and compliance with CHOD durations, reporting potential delays in advance</p></li></ul><p><strong>Close-Out Phase</strong></p><ul><li><p>Assist in preparation of offshore final documentation and project close-out reports</p></li><li><p>Review contract documents and drawings to identify constructability issues and variation requirements</p></li><li><p>Support Construction Managers in directing offshore activities, ensuring resource availability, safety compliance, and adherence to contract and ISO requirements</p></li><li><p>Assist in schedule adjustments to manage changes, delays, and contingencies while controlling cost</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in engineering (Preferably Mechanical, Civil, Naval), or equivalent</p></li><li><p>Minimum 10 years' experience in Offshore Construction in Oil &amp; Gas Industry</p></li><li><p>Good commercial, financial and contractual awareness</p></li><li><p>Good negotiation and decision-making skills</p></li><li><p>Excellent spoken and written English language skills</p></li><li><p>Potential managerial skills</p></li><li><p>Excellent communication skills</p></li><li><p>Committed team player/ leader</p></li><li><p>Thorough understanding of offshore operations and equipment</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Supervise installation of tracker foundations, mounting structures, torque tubes, bearings, drive units, dampers, and PV modules.</p></li><li><p>Ensure correct alignment, leveling, torque tightening, and installation of tracker systems.</p></li><li><p>Coordinate civil readiness before tracker installation.</p></li><li><p>Supervise module installation as per approved layout drawings.</p></li><li><p>Verify pile locations, tracker geometry, and structural tolerances.</p></li><li><p>Coordinate with survey, civil, electrical, QA/QC, and commissioning teams.</p></li><li><p>Monitor subcontractor productivity and daily progress.</p></li><li><p>Review IFC drawings, installation manuals, and vendor procedures.</p></li><li><p>Ensure compliance with OEM installation guidelines.</p></li><li><p>Raise Inspection Requests (IRs) and coordinate QA/QC inspections.</p></li><li><p>Prepare daily progress reports and material reconciliation reports.</p></li><li><p>Monitor material handling and storage of PV modules and tracker components.</p></li><li><p>Ensure compliance with HSE procedures and permit-to-work requirements.</p></li><li><p>Support pre-commissioning and mechanical completion activities.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>4–10 years of construction experience.</p></li><li><p>Minimum 2 years in utility-scale Solar PV projects.</p></li><li><p>Experience with tracker-based solar plants is highly preferred.</p></li><li><p>GCC/Middle East experience is an added advantage.</p></li></ol><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design, develop, and implement cutting-edge technical solutions that directly address business challenges and drive innovation.</li><li>Conduct rigorous testing and validation of new technologies and systems to ensure performance, reliability, and scalability.</li><li>Collaborate with cross-functional teams, including product managers and software developers, to translate complex requirements into actionable technical plans.</li><li>Troubleshoot and resolve complex technical issues, providing expert analysis and implementing effective long-term solutions.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Engineering, Computer Science, or a related technical field; Master's degree preferred.</p></li><li><p>Demonstrated expertise in [Specific Technology/Domain 1] and [Specific Technology/Domain 2].</p></li><li><p>Proven ability to design, develop, and deploy complex technical solutions.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design, develop, and test mechanical components and systems, ensuring optimal performance and adherence to project specifications.</li><li>Conduct detailed engineering analysis, including stress, thermal, and fluid dynamics, to validate designs and predict behavior under various conditions.</li><li>Create and review technical drawings, blueprints, and 3D models using CAD software, ensuring accuracy and completeness for manufacturing.</li><li>Oversee the manufacturing and assembly processes, collaborating with production teams to resolve technical challenges and maintain quality standards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field from an accredited institution.</p></li><li><p>Possession of a Professional Engineer (PE) license is highly advantageous.</p></li><li><p>Proficiency in CAD software (e.g., SolidWorks, AutoCAD, CATIA) and CAE tools (e.g., ANSYS, MATLAB).</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and develop electrical systems and components, ensuring they meet established safety and performance standards.</li><li>Conduct detailed analysis and simulations to evaluate the efficiency of electrical systems, making necessary adjustments based on findings.</li><li>Collaborate with cross-functional teams to integrate electrical designs with mechanical and software components seamlessly.</li><li>Create and maintain comprehensive documentation for all electrical designs, including schematics, specifications, and user manuals.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Electrical Engineering or a related field from an accredited institution is essential.</li><li>Professional Engineering (PE) license is preferred and enhances credibility in the field.</li><li>A minimum of 3-5 years of hands-on experience in electrical engineering, specifically in [industry type, e.g., renewable energy, telecommunications].</li><li>Experience with CAD software and simulation tools, such as AutoCAD, MATLAB, or PSpice, is crucial for design and analysis tasks.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design, develop, and implement innovative office infrastructure solutions that enhance productivity and user experience.</li><li>Oversee the installation, configuration, and maintenance of all office IT systems, including networks, servers, and workstations.</li><li>Manage and troubleshoot complex technical issues, providing timely and effective resolutions to minimize downtime.</li><li>Collaborate with cross-functional teams to understand their technical needs and translate them into actionable project plans.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Computer Science, Engineering, or a related technical field.</li><li>Minimum of 5 years of progressive experience in IT infrastructure management within an office environment.</li><li>Proven expertise in network administration (TCP/IP, DNS, DHCP, VPNs) and server management (Windows Server, Linux).</li><li>Hands-on experience with cloud platforms (AWS, Azure, GCP) and virtualization technologies (VMware, Hyper-V).</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and implement efficient irrigation systems, optimizing water usage for diverse agricultural and landscape projects.</li><li>Conduct site assessments to analyze soil conditions, topography, and water availability, informing system design decisions.</li><li>Prepare detailed technical drawings, specifications, and cost estimates for irrigation infrastructure, ensuring compliance with standards.</li><li>Oversee the installation and construction of irrigation systems, troubleshooting any issues and ensuring quality workmanship.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Agricultural Engineering, Civil Engineering, or a related field from an accredited institution.</li><li>Professional Engineer (PE) license or Engineer-in-Training (EIT) certification is highly desirable.</li><li>Minimum of 5 years of progressive experience in irrigation system design, installation, and management.</li><li>Proven expertise in hydraulic principles and water management practices within agricultural or landscape settings.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Develop, monitor, and maintain detailed project schedules using Primavera P6, ensuring alignment with project scope and milestones</p></li><li><p>Perform schedule analysis, critical path evaluation, and progress tracking to support timely project delivery</p></li><li><p>Identify, assess, and manage project risks; develop mitigation plans and maintain risk registers</p></li><li><p>Collaborate with engineering, procurement, and construction teams to integrate planning and risk strategies across EPC phases</p></li><li><p>Prepare progress reports, dashboards, and delay analysis (EOT claims, impact assessments) for stakeholders and management</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Bachelor’s Degree in Engineering (Civil/Mechanical or related discipline)</p></li><li><p><strong>12+ years of experience</strong> in planning and risk management within EPC projects</p></li><li><p>Strong expertise in <strong>Primavera P6</strong>, scheduling, and risk analysis tools</p></li><li><p>Proven experience in <strong>delay analysis, cost control, and risk mitigation</strong></p></li></ol><p></p></section>

<p>Prepare in co-ordination with the Site team and the Planning manager a detailed Project Construction Schedule including cost, resources, milestones, procurement and authority connections to obtain consultant’s approval. Review and continuously monitor, against approved schedules, the construction progress and report to the Project Manager/Planning Manager. Prepare revised recovery program when the program of work is substantially behind approved construction schedule. Submit within one month of project start manpower chart , schedule of materials and equipment schedule. Prepare Project Mobilization Schedule/Check List in accordance with the steps out-lined in project mobilization procedures in coordination with Planning Manager/Project Manager. Prepare, review and approve the subcontractor’s program in line with the requirements of the baseline program and the contract. Monitor the progress against the approved project construction schedule and alert the site management and the top management of any impediments that has the potential to jeopardize the milestone targets. Prepare detailed monthly reports to the consultant including detailed status reports on progress, technical submissions, commercial aspects, progress photographs and HSE statistics. Prepare internal construction schedule and ensure its progress implementation. Advise the site team of any potential delays for the project and participate in implementing the corrective action to avert the situation. Follow-up closely the material deliveries for the project and ensure timely deliveries for on-time completion of the project and report findings in weekly internal progress meeting. Ensure that the kick-off meeting with the subcontractor is conducted within 7 days after the issuance of Letter of Intent. Prepare project correspondences for the project in liaison with the project manager to notify the client/consultant/subcontractor about the delays and its potential impacts. Generate technical submission & material procurement logs in liaison with the technical department and closely monitor the technical submissions and procurement including subcontractor submissions and highlight to PM&PLM any anticipated delay. Attend all meetings with the consultant, client and subcontractors to discuss site progress, progress of technical submissions and other pending critical issues. Prepare agenda for subcontractor kick-off meetings. Monitor the productivity scales of the different trades and reporting to the site management & Planning Manager periodically of any shortfalls in the desired productivity scales. Prepare Project Close-Out Schedule; Verify with Planning Manager & Project Manager and issue the same to site team 3 months prior to project substantial completion date. </p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Civil Engineering. Minimum 5 years planning experience of building projects such as high rise-rise residential and commercial buildings, leisure centres, healthcare facilities, government buildings, industrial facilities etc., of which at least 5 years as Planning Engineer in a contracting company in UAE. Hands on site experience and ideally have Project Management background. Proven track record in successful planning of building projects, from start to finish. Confidence in dealing with international consulting and project management companies. Capable to plan, organize and deliver results. Proficiency in Primavera, Auto Cad and MS Project. Good command of the English language</p>

<p>• Proven experience in the installation, testing coordination, and commissioning support of LV &amp; HV Switchgear, Power Transformers, Ring Main Units (RMUs), and associated electrical equipment.</p><p>• Hands-on experience in LV &amp; HV cable laying, cable termination, jointing coordination, cable tray installation, and cable routing.</p><p>• Ability to review and interpret approved construction drawings, Single Line Diagrams (SLDs), layouts, and technical specifications.</p><p>• Experience in site supervision, ensuring all installation activities are carried out in compliance with project specifications, safety requirements, and quality standards.</p><p>• Strong experience in manpower planning, allocation, and productivity management for electrical installation works.</p><p>• Ability to prepare daily, weekly, and monthly work plans, monitor progress, and coordinate with clients, consultants, subcontractors, and internal teams.</p><p>• Experience in Material Take-Off (MTO), Bill of Quantities (BOQ) preparation, material reconciliation, and procurement support.</p><p>• Preparation and submission of daily progress reports, weekly reports, site records, inspection requests (IRs), and work completion documentation.</p><p>• Experience in coordinating inspections, testing activities, and the preparation of as-built drawings and handover documentation.</p><p>• Familiarity with TAQA, ADDC, ADNOC, or other UAE utility standards and experience in utility, infrastructure, or EPC projects will be an added advantage.</p><p>&nbsp;</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Major Overhauling and servicing of Engines as per standards</p></li><li><p>Service Engineer for Diesel engines maintenance, overhaul and troubleshooting for MTU and Volvo Penta products in different application</p></li><li><p>Repair and diagnose reported issues and problems in engines and controllers</p></li><li><p>Commissioning and Start-up of Diesel engines and systems</p></li><li><p>Ensuring Customer satisfaction by performing the required service efficiently</p></li><li><p>Troubleshooting using diagnostic tools and software</p></li><li><p>Programming of different types of engine controller and automation systems</p></li><li><p>Lead and support any project as per the management / supervisor directives</p></li><li><p>Independently carry out the assigned work in the workshop or in the field</p></li><li><p>Perform servicing and function tests, carry out repairs, maintenance and adjustment work as required</p></li><li><p>Conduct acceptance test and quality assurance upon completion of work</p></li><li><p>Prepare the work preparation including spare parts list used for repair quotation</p></li><li><p>Check installation of MTU products, setting to work and commissioning according to manufacturer’s standard and policies</p></li><li><p>Prepare and provide job status reports</p></li><li><p>Prepare service, time and travel reports upon completion of work</p></li><li><p>Manage assigned technical inquiries from customers including the assistance of experts in providing the clarification</p></li><li><p>Comply with all health &amp; safety regulations whilst addressing the assigned tasks</p></li><li><p>Help and guide team members if required</p></li><li><p>Compile route cause analysis by diagnosing mechanical and electronic failures</p></li><li><p>The safe use of hand and power tools</p></li><li><p>To operate computerized diagnostic equipment</p></li><li><p>To perform preventative and corrective maintenance; and to do other work as required</p></li><li><p>Repair and inspect tools in a safe manner and report if any damage</p></li><li><p>To diagnose and carry out the most complex mechanical and electronic repairs of engines and systems</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Computer literacy</li><li>Excellent analytical and problem-solving skills</li><li>Attention to details</li><li>Excellent proficiency skills</li><li>Strong verbal &amp; written communication skills</li><li>Excellent people and time management skills</li><li>Ability to work well both as part of a team and independently</li><li>Strong technical skills</li><li>Resilience</li></ul><p></p></section>

<ul><li><p><strong>Hiring Immediately.</strong></p></li><li><p><strong>"Must have Abu Dhabi Practising Engineering Card issued by the Municipality with Minimum of 7 Years Experience"</strong></p></li><li><p>Experience in Project Planning (P6 Primavera) and Progress Reporting.</p></li><li><p>Multi-Project Handling Ability</p></li><li><p>Strong Experience in the Execution of Projects</p></li><li><p>Native Arabic Speaking</p></li><li><p>Good Communication Skills in Dealing with Clients & Consultants</p></li><li><p>Good Knowledge of Project Scheduling by Using Primavera P6</p></li><li><p>Critical Thinking and Problem Solving</p></li><li><p>Strong communication, leadership, and interpersonal skills.</p></li><li><p>Prepare and present regular progress reports to project stakeholders, including clients, senior management, and regulatory authorities.</p></li><li><p>Maintain positive relationships with clients by addressing their concerns, providing regular updates, and ensuring client satisfaction.</p></li><li><p>Maintain accurate project documentation, including drawings, reports, and records of project activities.</p></li><li><p>Lead and manage project teams, including site supervisors, engineers, and subcontractors. Foster collaboration and teamwork among team members.</p></li><li><p>Bonus will be provided based on the good project progress.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelors Degree in Civil Engineering ( Equivalency Certificate from Abu Dhabi Higher Education Authority is Mandatory Requirement)</p></li><li><p>Society of Engineering (UAE) Membership Required.</p></li><li><p>Abu Dhabi Municipality Registration Card Required.</p></li><li><p>Minimum 7 Years of UAE Experience as a Civil Engineer</p></li><li><p>Valid UAE Driving License</p></li></ul>

<p> ● Provide L3 support for Microsoft Windows Server environments and related infrastructure. ● Manage and troubleshoot VMware virtualized workloads. ● Support NVIDIA DLS license Management and vGPU provisioning via VMware Infrastructure. ● Support Omnissa Horizon VDI Management with NVIDIA vGPU for Students and Researchers. ● Perform system administration, patch management, and security remediation. ● Support MS SQL Server Cluster administration and integration with enterprise applications. ● Automate administrative tasks using PowerShell or VBScript. ● Work with enterprise management tools (e.g., SCCM) for configuration and deployment. ● Contribute to DevOps initiatives, including automated deployments, configuration-as-code, and continuous improvement. ● Collaborate with Linux, Cloud, and Security teams to enhance reliability and automation. </p><p><strong>Desired Candidate Profile</strong></p><p>Candidate Profile: ● 6–10 years of experience supporting Windows Server environments. ● Strong skills in VMware, Active Directory, Group Policy, and cloud platforms (Azure/AWS). ● Deep understanding of different types of clusters (VMware, Windows, SQL) ● Experience with SQL administration and automation (PowerShell, VBScript). ● Hands-on experience with SCCM or equivalent enterprise management tools. ● Familiarity with DevOps tools (Git, Jenkins, Azure DevOps, Terraform, etc.) preferred. ● Understanding of hardware infrastructure and Data center operations. ● Good understanding of IT security, compliance, and process governance. ● Windows Server Knowledge ● Active Directory (Group Policy) ● SCCM Patching ● VMware vCenter, Esxi and VM and Physical Esxi ● VMware Horizon VDI, UAG, Connection Servers, Enrolment Server ● File and Print Server. ● Physical Blade and Rack Server ● Windows Server installation and configuration: One of the primary responsibilities is the installation and configuration of Windows servers. This includes setting up hardware and software, establishing and managing user accounts, and ensuring the servers are integrated with existing network sysems ● Monitoring and maintenance: Windows Server Administrators implement and manage security protocols such as InsightVM, Splunk, Cortex ● Security management: Administrators are responsible for establishing and managing backup procedures and recovery plans to ensure data integrity and availability in case of system failures or disasters. ● Backup and recovery issues: When issues arise, whether they're software glitches, hardware malfunctions, or user errors, Administrators must troubleshoot and resolve these problems quickly to minimize downtime and disruption. ● Vulnerability management : Remediation Plan, Coordination with application owner to manage downtime and remediation. ● Shared Drive: Permission management, Folder Creation, Deletion, File transfer from one server to another server along with permission. ● Print Server: RightFax Print server only Managed. ● Windows OS Troubleshooting: ● SCCM: Patching Windows Servers from SCCM, Patch Management, Deployment and Complaince ● VMware vCenter: involved in the research, installation, troubleshooting, and ongoing maintenance of vCenter, Esxi, HA, DRS, Datastore, vSwitch, Networking etc ● Troubleshooting ESX issues related to storage, network and performance issues ● Horizon VDI: VDI Horizon Administrator is responsible for the management and operation of the VMware Horizon Virtual Desktop Infrastructure (VDI). ● This role involves ensuring the stability, integrity, and efficient operation of the information systems that support core organizational functions. Including UAG, Connection Servers, Enrollment Servers and Desktop Depoyment, Golden Image. ● Active Directory: View and modify global policies and configuration settings except for administrator roles and permissions ● Excellent communication, documentation, and cross-team collaboration skills. ● Adherence to NYUAD IT policies, standards, and governance frameworks. ● Ability to collaborate effectively across functional teams (network, storage, application, security). ● Proactive mindset with a focus on continual service improvement with a solution-oriented approach. ● Strong teamwork and communication skills, fostering collaboration and knowledge sharing. ● Demonstrated problem-solving ability and adaptability in dynamic, fast-paced environments. ● High level of accountability and professionalism in delivering quality outcomes </p>

<ul><li><p>Ø Create, update, and monitor detailed project timelines using tools like Primavera P6 or MS Project. Ø Allocate manpower, materials, and equipment efficiently across multiple projects. Ø Monitor actual progress against planned milestones and adjust schedules as needed. Ø Generate weekly/monthly progress reports, dashboards, and delay analyses for internal and client review. Ø Liaise with project managers, site engineers, designers, and subcontractors to ensure alignment across all phases. Ø Prepare tender and baseline schedules in line with project scope and contractual requirements. Ø Verify progress and ensure compliance with design specifications and quality standards. Ø Identify risks, prepare Extension of Time (EOT) claims, and propose mitigation strategies. Ø Attend meetings, present schedule updates, and address client concerns regarding timelines. Ø Conduct site visits to verify actual progress and collect data for schedule updates. Ø Maintain accurate records of planning documents, revisions, and approvals. Ø Authority to finalize and submit project schedules for client and internal approval. Ø Recommend and implement schedule changes due to scope variations or site conditions. Ø Provide official progress reports and delay notifications to clients and senior management. Ø Direct coordination efforts between planning, procurement, and execution teams to ensure schedule adherence. Ø Update and revise project schedules (within approved baseline). Ø Escalate major schedule changes to Project Manager/Senior Planning Engineer for Ø Provide schedule data for management decision-making. Ø Recommend recovery actions for delayed activities.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Ø Bachelor’s degree in architecture, Construction Management, Interior Design or civil Engineering. Ø Minimum 4–6 years of experience in construction or interior fit-out projects. Ø Deep understanding of materials, construction techniques, and sequencing specific to interior design and joinery projects. Ø Familiarity with all phases of interior projects—from design development to execution and handover. Ø Awareness of building codes, authority approvals, and quality standards relevant to the region. Ø Knowledge of project contracts, procurement processes, and cost control mechanisms. Ø Strong proficiency in tools like Primavera P6, MS Project, and Excel to develop and manage detailed project timelines. Ø Ability to identify potential delays, prepare Extension of Time (EOT) claims, and implement mitigation strategies. Ø Skill in planning manpower, materials, and equipment to optimize productivity and reduce costs. Ø Experience in conducting site inspections and ensuring alignment between planned and actual progress. Ø Ability to interpret complex project data and make informed decisions to keep projects on track. Ø Strong interpersonal skills to coordinate with project managers, designers, suppliers, and clients. Ø Flexibility to adjust plans based on site conditions, client changes, or unforeseen challenges. Ø Precision in scheduling, documentation, and compliance with design and quality standards. Ø Communication and coordination skills for working with multidisciplinary teams. Ø Strong foundation in construction methodologies, material specifications, and sequencing. Ø Good understanding of fit-out processes, authority approval requirements, and local construction practices. Ø Strong analytical, communication, and coordination skills</p></li></ul>

<ul><li><p>Ø Assist the Project Manager in planning, coordinating, and executing interior fit-out works Ø Review and coordinate IFC drawings, shop drawings, and material submittals Ø Supervise and monitor site activities to ensure compliance with approved designs and specifications Ø Coordinate architectural, interior, and MEP works to avoid clashes and delays Ø Ensure quality standards and approved method statements are followed on site Ø Monitor project progress and assist in preparing daily, weekly, and monthly reports Ø Coordinate with subcontractors and suppliers to ensure timely execution and material delivery Ø Assist in identifying variations, site issues, and technical problems and report to management Ø Ensure compliance with Health, Safety, and Environmental (HSE) requirements Ø Participate in inspections, snagging, de-snagging, and handover processes Ø Assist in preparation of as-built drawings and handover documentation Ø Provide technical instructions to site teams within approved project scope Ø Review and recommend approval or rejection of shop drawings and materials Ø Stop working temporarily in case of safety risks or major quality non-conformance Ø Raise RFIs, NCRs, and technical queries as required Ø Coordinate directly with consultants, subcontractors, and suppliers on technical matters Ø Recommend corrective actions and improvements to the Project Manager</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Ø Bachelor’s degree in civil engineering, Architectural Engineering, Construction Management, or equivalent. Ø 3–7 years’ experience in Interior fit-out projects (commercial, residential, hospitality, retail, F&B), Joinery, gypsum, finishing works, and MEP coordination. Ø Experience working with consultants, clients, Multiple subcontractors and suppliers Ø Strong knowledge of Fit-out construction methods and sequences, Interior finishes (Gypsum partitions, ceilings, Joinery, Flooring systems, Wall finishes and decorative works. Ø Professional in Reading and interpreting IFC drawings, Shop drawings, Specifications and BOQs. Ø Strong knowledge of Construction project lifecycle, Site coordination and logistics, Material approvals and mockups, Snagging, testing, commissioning, and handover procedures. Ø Professional in AutoCAD, MS Project or Primavera, MS Office Site measurement and verification skills. Ø Ability to Manage subcontractors’ daily activities, coordinating between design, site, and MEP teams, Tracking project progress and reporting. Ø Clear verbal and written communication in English and ability to coordinate with Clients, Consultants, Site teams, Suppliers and subcontractors. Ø Ability to manage multiple tasks simultaneously, guide and support site supervisors and foremen and Willingness to work extended hours when required. Ø Ability to enforce site discipline, quality, safety standards and strong work ethic and attention to detail. Ø Analyze drawings, specifications, site conditions critically and Support decision-making with facts and site data.</p></li></ul>

<p>Ø Oversee day-to-day site activities for interior fit-out works. Ø Ensure work aligns with approved drawings and specifications. Ø Interface with designers, contractors, vendors, and clients. Ø Monitor workmanship and material standards. Ø Enforce health and safety protocols on-site. Ø Ensure all fit-out activities follow safety regulations. Ø Report unsafe practices or incidents and enforce corrective actions. Ø Coordinate with the subcontractor to avoid interface problems and maximize work quality. Ø Maintain daily site reports including labor, material usage, and progress. Ø Understand and interpret architectural, structural, and MEP drawings. Ø Ensure red-line drawings are updated as per site modifications. Ø Maintain site records, progress reports, and inspection logs. Ø Contribute to building an on-site work culture based on best practices in safety, cleaning, work quality, and waste management. Ø Supervise all interior fit-out activities including joinery, partitions, ceilings, flooring, and MEP installations. Ø Supervise skilled and unskilled labor on-site. Ø Supervise site preparation and dismantling for each activity under his supervision. Ø follow up on the WIR’s, NCR’s and snag lists. Ø Review the project scope of work, including drawings, specifications, quality plans, and project program. Ø Conduct regular site inspections to ensure adherence to design, quality, and safety standards. Ø Coordinate material deliveries and subcontractor schedules to avoid delays. Ø Inspect materials received on site to ensure the workmanship of material compliance with quality standards. Ø Prepare and monitor inspection requests, preliminary execution plans, methodology statements, risk assessments, review sheets, and any other quality requirements. Ø Resolve on-site issues such as design conflicts, material shortages, or labor challenges. Ø Report progress and challenges to project manager, construction manager and clients. Ø Ensure timely completion of works within budget and scope. Ø Approve minor design adjustments in consultation with designers or project managers. Ø Reject substandard work or materials that do not meet project specifications. Ø Direct site labor and subcontractors to ensure productivity and safety. Ø Initiate corrective actions for delays or non-compliance. Ø Sign off on completed work sections for client or consultant inspections. Ø Create an open work environment where employees and foremen can raise questions, discuss them with managers, and manage</p><p><br><br></p><p><strong>Desired Candidate Profile</strong></p><p>· Bachelor’s degree in civil engineering, construction management, architecture or related field. · Minimum 4-5 years of experience in interior fit-out or construction projects · Strong knowledge of AutoCAD and technical drawings · Excellent communication and coordination skills for client and team interactions · Knowledge of Inspection & Test Plans (ITPs), Method Statements (MS), and QA/QC procedures. · Deep understanding of joinery, gypsum works, MEP integration, and finishing materials. · Familiarity with local building regulations, safety codes, and quality benchmarks. · Knowledge of scheduling, budgeting, and resource allocation in interior projects. · Understanding of materials used in luxury interiors, including wood, stone, glass, and fabrics. · Skilled in AutoCAD, MS Project, and possibly Revit or Primavera for planning and documentation. · Leading site teams, motivating workers, and ensuring safety compliance. · Handling unexpected challenges, design changes, or client requests with flexibility. · Representing the company professionally during site visits and meetings. · Excellent organizational and time management skills with the ability to manage multiple tasks simultaneously. · Strong problem-solving and decision-making abilities. · Ability to work under pressure and deliver within tight deadlines. · High attention to detail and commitment to quality. · Professional integrity, fairness, and proactive approach to site challenges</p><p><br><br></p>

<p>Work and supervise all activities related to all Rigless Operations in offshore to efficiently carry out all preparations, implementation and close-out works. Carries out a variety of duties related to the preparation and execution of programmes to meet client Management expectations. Provide feedback in job design including preparation of detailed technical specifications, execution of all planned works and support to provide feedback in establishing required contracts for all well intervention, well completions, well services, well integrity and workover related services and purchases. Be responsible for actual work at site preparations and coordinate with service contractors on technical matters for operation. Work site as a Petroleum Engineer Supervisor to conduct the Rigless Operations in a safe and efficient manner. Participate and ensure Company’s BDOMS and SOPs are in place and compliant during the Well Intervention, Well Services and Well Integrity operations.</p><p><strong>Desired Candidate Profile</strong></p><ol type="1"><li><p>Rigless Operations</p></li></ol><ul><li><p>Plan, coordinate, and supervise offshore rigless operations in accordance with approved programs, applicable standards, and Company procedures.</p><br></li></ul><ol start="2" type="1"><li><p>Well Intervention and Execution</p></li></ol><ul><li><p>Act as Well Site Petroleum Engineer for Slickline, Coiled Tubing, N2 kick-off, sealant repair, cased-hole logging, stimulation, flow-back and well testing operations</p><br></li></ul><ol start="3" type="1"><li><p>Well Services & Well Integrity:</p></li></ol><ul><li><p>Plan and supervise well maintenance, monitoring and integrity activities, ensuring well barriers are maintained in compliance with the company’s WIMS requirements.</p><br></li></ul><ol start="4" type="1"><li><p>Technical & Operational Support</p></li></ol><ul><li><p>Provide on-site technical solutions, troubleshoot operational issues, support completion/intervention/workover planning and participate in Management of Change (MOC) when required.</p><br></li></ul><ol start="5" type="1"><li><p>Equipment & Contractor Management</p></li></ol><ul><li><p>Ensure availability and suitability of required equipment, tools and personnel, coordinate and evaluate service contractors and vendors.</p><br></li></ul><ol start="6" type="1"><li><p>HSE & Compliance</p></li></ol><ul><li><p>Ensure operations comply with the company’s HSE requirements, SOPs and applicable industry standards. Conduct risk assessments, attend SIMOPS, incident investigations and hazard identification.</p><br></li></ul><ol start="7" type="1"><li><p>Mandatory Training & Certification</p></li></ol><ul><li><p>Valid T-BOSIET, H2S Awareness, WMS and IWCF Level 4 certification/training is preferable.</p><br></li></ul><ol start="8" type="1"><li><p>Experience</p></li></ol><ul><li><p>Total 16 year’s experience with a minimum of 10 years field operations experience</p></li></ul>

<ul><li>Develop and maintain detailed project schedules using advanced scheduling software to ensure timely completion.</li><li>Coordinate with multidisciplinary teams to gather project requirements and align schedules with project milestones and deliverables.</li><li>Perform critical path analysis to identify bottlenecks and recommend solutions that optimize project timelines.</li><li>Regularly update and communicate project status reports to stakeholders, ensuring transparency and accountability.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Civil Engineering.</p></li><li><p>Minimum of 5 years of relevant work experience in planning and scheduling within the construction/ Infrastructure.</p></li><li><p>Professional certifications such as PMP (Project Management Professional) or PMI-SP (Scheduling Professional) are highly preferred.</p></li><li><p>Proficiency in scheduling software such as Primavera P6 or MS Project, demonstrating technical competence in project management tools.</p></li></ul>