وظائف مشغل ماكينة - ام القيوين الإمارات

<ul><li><p>Operate the <strong>Egglayer concrete block-making machine</strong> independently and safely.</p></li><li><p>Set up and adjust the machine according to required block sizes and specifications.</p></li><li><p>Perform <strong>mould changes, mould alignment and machine adjustments</strong> for different products.</p></li><li><p>Monitor concrete feeding, vibration, compaction and moulding throughout production.</p></li><li><p>Ensure blocks meet required <strong>dimensions, density, strength, shape and finish standards</strong>.</p></li><li><p>Identify and troubleshoot routine <strong>mechanical, hydraulic and operational faults</strong>.</p></li><li><p>Carry out daily machine inspections, cleaning and basic preventive maintenance.</p></li><li><p>Coordinate with batching/mixing teams to maintain correct concrete consistency and production flow.</p></li><li><p>Monitor machine performance and take corrective action to minimize downtime.</p></li><li><p>Control material wastage and reduce rejected/damaged blocks.</p></li><li><p>Maintain required daily production output and quality targets.</p></li><li><p>Report breakdowns, maintenance requirements and recurring machine issues to the supervisor.</p></li><li><p>Follow all factory <strong>health, safety and equipment operating procedures</strong>.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum <strong>3–5 years of hands-on experience</strong> operating an Egglayer concrete block machine.</p></li><li><p>Previous experience in a <strong>concrete block manufacturing plant is required</strong>.</p></li><li><p>Proven ability to operate the machine independently.</p></li><li><p>Strong knowledge of <strong>block moulding, vibration and compaction processes</strong>.</p></li><li><p>Hands-on experience with <strong>mould changing, setting and alignment</strong>.</p></li><li><p>Working knowledge of <strong>hydraulic and mechanical systems</strong>.</p></li><li><p>Ability to diagnose and resolve basic machine faults and production issues.</p></li><li><p>Experience producing <strong>hollow blocks, solid blocks and different block sizes</strong>.</p></li><li><p>Good understanding of concrete/block quality requirements.</p></li><li><p>Basic preventive maintenance knowledge.</p></li><li><p>Ability to work in a high-output factory environment and meet production targets.</p></li><li><p><strong>UAE/GCC block factory experience is preferred.</strong></p></li><li><p>Physically fit and willing to work shifts/overtime when production requires it.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Operate and maintain CNC laser cutting machines, ensuring precise execution of designs and optimal material utilization.</li><li>Translate complex 2D and 3D designs from AutoCAD into machine-readable code, troubleshooting any discrepancies.</li><li>Perform quality control checks on cut parts, verifying dimensions and adherence to specifications using precision measuring tools.</li><li>Select and set appropriate laser parameters (power, speed, frequency) based on material type and thickness for superior cut quality.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent; vocational training or certification in CNC operation or CAD is highly advantageous.</li><li>Minimum 3-5 years of hands-on experience operating CNC laser cutting machinery and working with AutoCAD.</li><li>Proven proficiency in AutoCAD for creating, editing, and preparing technical drawings for laser cutting.</li><li>Demonstrated understanding of laser physics, material properties, and cutting techniques for various substrates.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job description: Company: Al Ameen Industries LLC Location: Umm Al Quwain, UAE Position: Salvagnini P4 Machine Programmer cum Operator</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>About the Role</strong></p><p>Al Ameen Industries LLC is seeking a skilled and experienced <strong>Salvagnini P4 Machine Programmer cum Operator</strong> to join our production facility in Umm Al Quwain. The ideal candidate will be responsible for the efficient operation and programming of the Salvagnini P4 panel bending system, ensuring high-quality output and adherence to production schedules.</p><p><strong>Key Responsibilities</strong></p><ul><li><p><strong>Programming:</strong> Create, edit, and optimize bending programs using Salvagnini software (e.g., OPS, Stream) for various sheet metal components.</p></li><li><p><strong>Operations:</strong> Set up and operate the Salvagnini P4 machine to perform precise bending operations according to technical drawings and engineering specifications.</p></li><li><p><strong>Maintenance:</strong> Perform routine maintenance and troubleshooting on the machine to ensure optimal performance and minimize downtime.</p></li><li><p><strong>Quality Control:</strong> Inspect finished products to ensure they meet quality standards and dimensional accuracy.</p></li><li><p><strong>Efficiency:</strong> Monitor production flow, optimize cycle times, and suggest improvements to enhance operational efficiency.</p></li><li><p><strong>Safety:</strong> Maintain a clean and safe work environment, adhering to all company health and safety protocols.</p></li></ul><p><strong>Requirements</strong></p><ul><li><p><strong>Experience:</strong> Proven experience in operating and programming Salvagnini P4 or similar automated panel bending machines.</p></li><li><p><strong>Technical Skills:</strong> Strong ability to read and interpret complex engineering drawings and blueprints. Proficient in using CAD/CAM software related to sheet metal fabrication.</p></li><li><p><strong>Knowledge:</strong> Comprehensive understanding of sheet metal properties, bend allowances, and machine parameters.</p></li><li><p><strong>Problem-Solving:</strong> Excellent analytical and troubleshooting skills.</p></li><li><p><strong>Education:</strong> Relevant technical diploma or certification in mechanical engineering or a related field is preferred.</p></li><li><p><strong>Language:</strong> Fluency in English (Arabic is an advantage).</p></li></ul><p><strong>What We Offer</strong></p><ul><li><p>Competitive salary and benefits package commensurate with experience.</p></li><li><p>Opportunity to work with advanced manufacturing technology in a growing industry.</p></li><li><p>A professional and collaborative work environment.</p></li></ul><p><strong>How to Apply</strong></p><p>Interested candidates who meet the above criteria are invited to send their updated CV.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Operate CNC Press Brake / Bending Machines safely and efficiently.</p></li><li><p>Read and interpret engineering and fabrication drawings.</p></li><li><p>Set up machines and select the appropriate tooling for each job.</p></li><li><p>Perform accurate bending operations in accordance with specifications.</p></li><li><p>Inspect finished components to ensure they meet quality standards.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Minimum <strong>2–8 years of experience</strong> operating CNC Press Brake / Bending Machines.</p></li><li><p>Experience in a structural steel fabrication or manufacturing environment.</p></li><li><p>Good knowledge of measuring instruments and quality inspection procedures.</p></li><li><p>Ability to work independently and as part of a team.</p></li><li><p>Immediate joiners will be an advantage.</p></li></ol><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Program and set up CNC laser cutting machines based on engineering drawings and CAD/CAM files to ensure precision and accuracy.</p></li><li><p>Program, set up, and operate <strong>CNC Press Brake (Bending Machine)</strong> to bend components according to engineering drawings and specifications.</p></li><li><p>Load and secure metal sheets and other materials onto machine beds before operation.</p></li><li><p>Monitor laser cutting and bending processes, adjusting machine parameters to achieve optimum quality, accuracy, and productivity.</p></li><li><p>Perform routine quality inspections using measuring tools such as calipers and micrometers to verify dimensions and tolerances.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>High school diploma or equivalent; vocational training in CNC machining or a related field is preferred.</p></li><li><p>Basic understanding of CAD/CAM software and the ability to interpret technical drawings and blueprints.</p></li><li><p>Familiarity with various materials (metals, plastics, etc.) and their cutting characteristics using laser technology.</p></li><li><p>Proven experience operating CNC laser cutting machines, with at least <strong>1–2 years of relevant experience</strong>.</p></li><li><p><strong>Experience operating CNC Press Brake (Bending Machine) is required.</strong></p></li><li><p><strong>Previous experience in a steel manufacturing/fabrication factory is required.</strong></p></li><li><p><strong>Knowledge and experience in manufacturing light poles and telecommunication towers will be an added advantage.</strong></p></li></ul><p></p></section>

<ul><li><p>The Forklift Operator is responsible for safely operating forklifts to transport, load, unload, and store steel materials, finished products, and raw materials within the factory and warehouse. The role ensures efficient material handling while maintaining safety, quality, and productivity standards. Key Responsibilities Operate forklifts safely to move steel materials, finished goods, and raw materials. Load and unload trucks, trailers, and containers. Transport materials between production, storage, and dispatch areas. Stack and store materials in designated locations following warehouse procedures. Perform daily pre-operation inspections and report any mechanical issues immediately. Ensure materials are handled carefully to prevent damage. Assist with inventory movement and stock organization. Follow loading plans and supervisor instructions. Maintain a clean and organized work area. Comply with company safety policies and wear the required PPE at all times. Support production and warehouse operations as required.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>High school education or equivalent. Valid UAE Forklift Operator License/Certification. Minimum 2–3 years of forklift operating experience, preferably in a steel manufacturing or fabrication environment. Experience handling long, heavy steel sections and fabricated products is an advantage. Basic understanding of warehouse operations and safety procedures. Ability to work in a fast-paced industrial environment. Good communication skills in basic English.</p></li></ul>

<ul><li>Operate a forklift equipped with a hydraulic brick/block clamp attachment.</li><li>Safely lift and handle bundles of concrete blocks, hollow blocks, solid blocks and thermal blocks.</li><li>Load and unload block bundles onto trailers, trucks and other delivery vehicles.</li><li>Stack finished blocks safely and efficiently within designated storage and loading areas.</li><li>Apply appropriate clamping pressure to securely handle blocks without cracking, crushing or damaging the product.</li><li>Position and align the clamp correctly before lifting block bundles.</li><li>Handle different block sizes, bundle configurations and production requirements.</li><li>Coordinate with production, yard and dispatch teams for timely loading of customer orders.</li><li>Verify product type and quantity before loading to reduce dispatch errors.</li><li>Conduct daily inspections of the forklift, hydraulic clamp, hoses, forks, tyres and safety systems.</li><li>Identify and immediately report hydraulic leaks, clamp faults or equipment abnormalities.</li><li>Maintain safe operating speeds and follow designated factory traffic routes.</li><li>Minimize block breakage and handling damage during movement and loading.</li><li>Maintain cleanliness and basic care of the forklift and clamp attachment.</li><li>Follow all company HSE, loading and material-handling procedures.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 2–5 years of forklift operating experience in concrete blocks, bricks, pavers, precast products or a similar heavy building-material environment.</li><li>Hands-on experience operating a forklift with a Brick/Block Clamp Attachment is mandatory.</li><li>Strong understanding of hydraulic clamp operation and pressure control.</li><li>Proven experience loading and unloading concrete block bundles.</li><li>Ability to safely stack blocks at different heights and within confined factory/yard areas.</li><li>Good understanding of forklift load capacity, stability and safe lifting practices.</li><li>Ability to inspect the clamp attachment and identify basic hydraulic or mechanical issues.</li><li>Experience working in a concrete block factory or brick manufacturing plant is strongly preferred.</li><li>Valid UAE forklift operator certification/licence preferred.</li><li>UAE/GCC experience is an advantage.</li><li>Physically fit and willing to work factory shifts and overtime when required.</li></ul>

<br><p>We are looking for a Technician for cleaning machinery with minimum 1 year of UAE experience in sales and technical support of cleaning equipment.</p><p>Requirements:</p><ul><li><p>Diploma in Electrical Engineering</p></li><li><p>Minimum 1 year experience in cleaning machinery field</p></li><li><p>Basic knowledge of scrubbers, vacuum cleaners, pressure washers, and related equipment</p></li><li><p>Ability to handle customer visits, demonstrations, troubleshooting, and sales support</p></li><li><p>Good communication skills</p></li><li><p>UAE driving license preferred</p></li></ul><p>Responsibilities:</p><ul><li><p>Visit customers and promote cleaning machinery products</p></li><li><p>Conduct machine demonstrations and basic troubleshooting</p></li><li><p>Coordinate with service and sales teams</p></li><li><p>Follow up on inquiries and customer requirements</p></li></ul><p>Location: UAQ</p><p>Job Types: Full-time, Permanent</p><p>Ability to commute/relocate:</p><br><ul><li><p>Umm al-Quwain: Reliably commute or willing to relocate with an employer-provided relocation package (Required)</p></li></ul><br><p>Experience:</p><br><ul><li><p>Electrical or Related Fields: 2 years (Required)</p></li></ul><br><p>Language:</p><br><ul><li><p>English (Required)</p></li><li><p>Hindi (Required)</p></li></ul><br><p>License/Certification:</p><br><ul><li><p>Diploma in Electrical Engineering (Required)</p></li></ul><br><p>Work Location: In person</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements</p><p>A diploma or degree in Electrical Engineering.</p><p>Proven experience working with and troubleshooting motors.</p><p>Strong problem-solving skills and the ability to work independently.</p><p>Excellent communication and customer service skills.</p><p>Willingness to travel to customer sites for on-location repairs.</p><br/><p>Work Location & Benefits</p><p>The primary work location is our facility in Umm Al Quwain. </p><p>*Accommodation will be provided* on-site.</p><p>If you are a motivated Electrical Technician with a passion for troubleshooting and repairing machinery, we encourage you to apply and become a part of our growing team.</p>

<p><strong>Job Purpose</strong></p><p>Responsible for managing the complete repacking operation for nuts, spices, seeds, and related food products, ensuring <strong>production targets, product quality, food safety, hygiene, manpower efficiency, and timely dispatch</strong> are achieved.</p><p><strong>Key Responsibilities :</strong></p><p><strong>1. Production Planning</strong></p><ul><li><p>Plan daily, weekly, and monthly production according to sales orders and stock requirements.</p></li><li><p>Coordinate with Purchase, Warehouse, Quality, and Sales teams.</p></li><li><p>Ensure timely completion of customer orders.</p></li><li><p>Optimize production schedules and minimize downtime.</p></li></ul><p><strong>2. Repacking Operations</strong></p><ul><li><p>Supervise cleaning, sorting, weighing, filling, sealing, labeling, coding, and carton packing.</p></li><li><p>Handle different pack sizes such as retail, foodservice, and bulk packs.</p></li><li><p>Ensure correct product, weight, packaging material, batch number, and expiry date.</p></li><li><p>Monitor yield and minimize product losses during repacking.</p></li></ul><p><strong>3. Quality & Food Safety</strong></p><ul><li><p>Ensure compliance with <strong>GMP, HACCP, food safety, and UAE Municipality requirements</strong>.</p></li><li><p>Work closely with QA/QC to maintain product specifications.</p></li><li><p>Ensure allergen control, especially for nuts.</p></li><li><p>Prevent cross-contamination between nuts, spices, seeds, and other products.</p></li><li><p>Maintain proper cleaning and sanitation procedures.</p></li><li><p>Ensure proper batch traceability and documentation</p></li></ul><p><strong>4. Machinery & Maintenance</strong></p><ul><li><p>Monitor packing machines, weighing machines, sealers, metal detectors, coding machines, and other equipment.</p></li><li><p>Coordinate preventive maintenance with the maintenance team.</p></li><li><p>Reduce machine breakdowns and production downtime.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications</p><ul><li><p>Diploma/Bachelor’s degree in <strong>Food Technology, Food Science, Production Management, or a related field</strong>.</p></li><li><p>Good experience in food manufacturing/repacking, preferably in <strong>nuts, spices, seeds, dry fruits, or similar products</strong>.</p></li><li><p>Strong knowledge of <strong>GMP, HACCP, food safety, hygiene, and allergen control</strong>.</p></li><li><p>Experience in <strong>production planning, manpower management, and repacking operations</strong>.</p></li><li><p>Hands-on knowledge of <strong>packing machinery and production equipment</strong>.</p></li></ul>

<ul><li><p>Ensure efficient production with the optimal combination of inputs to produce maximum output at the minimum cost by supervising the complete process.</p></li><li><p>Contribute to the estimation of raw materials, preparation of the cutting list and production planning.</p></li><li><p>Improve, maintain, and monitor the efficiency of the workers.</p></li><li><p>Keep department informed of the production plan, deadlines/targets, and any changes etc.</p></li><li><p>Resolve production issues by coordinating with Line Manager.</p></li><li><p>Ensure the general housekeeping of all areas, walkways, workstations etc.</p></li><li><p>Immediately report any machine breakdowns to the Maintenance Department and the Line Manager.</p></li><li><p>Ensure a safe working environment and enforce safe work practices, reporting any violators, all work accidents and make certain that preventative measures are taken.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Bachelor's Degree or Diploma in <strong>Mechanical Engineering, Industrial Engineering, Manufacturing, Wood Technology</strong>, or a related field.</p></li><li><p>Minimum <strong>5–10 years of experience in joinery or woodworking manufacturing</strong>.</p></li><li><p>Strong knowledge of joinery manufacturing processes, including:</p><ul><li><p>CNC operations</p></li><li><p>Woodworking machinery</p></li><li><p>Veneer and laminates</p></li><li><p>Solid wood</p></li><li><p>MDF and plywood</p></li><li><p>Cabinet and furniture production</p></li><li><p>Edge banding and machining</p></li><li><p>Sanding and polishing</p></li><li><p>Painting and finishing works</p></li></ul></li><li><p>Strong understanding of production planning, scheduling, capacity planning, and workflow management.</p></li><li><p>Ability to read and interpret technical drawings, shop drawings, and production specifications.</p></li><li><p>Strong knowledge of quality control and manufacturing standards.</p></li><li><p>Excellent leadership, communication, problem-solving, and decision-making skills.</p></li><li><p>Proficiency in Microsoft Office and ERP/MRP production systems.</p></li><li><p>Ability to manage multiple production requirements and meet strict project deadlines.</p></li><li><p>Ability to work under pressure in a fast-paced manufacturing environment.</p></li><li><p>Experience in <strong>high-end joinery, luxury interiors, furniture, and fit-out production</strong>.</p></li><li><p>Knowledge of Lean Manufacturing and Continuous Improvement methodologies.</p></li><li><p>Familiarity with ISO 9001 and quality management systems.</p></li><li><p>Experience working with project-based production and customized joinery.</p></li><li><p>Strong knowledge of production costing, material optimization, and waste reduction.</p></li></ol><br><br>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Manager – P&amp;M is responsible for overseeing the planning, procurement, deployment, operation, maintenance, and optimization of all plant and machinery assets across the project(s). The role ensures equipment availability, operational efficiency, cost control, safety, and compliance with statutory and internal standards.</p><br><ul><li><p>Assess project requirements and prepare the P&amp;M deployment plan in coordination with the project team.</p></li><li><p>Coordinate mobilization and demobilization of equipment as per project timelines.</p></li><li><p>Optimize equipment allocation across multiple sites to minimize idle time and cost.</p></li><li><p>Ensure proper operation, preventive and breakdown maintenance of all construction equipment.</p></li><li><p>Implement maintenance schedules, inspection procedures, and fault diagnosis protocols.</p></li><li><p>Monitor machine downtime, efficiency, and service records; initiate timely repairs.</p></li><li><p>Coordinate with procurement for hiring, leasing, or purchasing of P&amp;M assets.</p></li><li><p>Maintain inventory of spare parts, consumables, and tools to support maintenance activities.</p></li><li><p>Ensure vendor performance, AMCs, and warranty tracking.</p></li><li><p>Prepare and monitor equipment operation budgets, fuel consumption, maintenance costs, and hiring expenses.</p></li><li><p>Identify opportunities for cost-saving through efficient equipment utilization and repair vs. replace analysis.</p></li><li><p>Ensure all P&amp;M operations comply with safety, environmental, and statutory requirements.</p></li><li><p>Maintain logs, service history, calibration records, and safety certifications.</p></li><li><p>Support audits and inspections by internal and external bodies.</p></li><li><p>Supervise and lead a team of engineers, mechanics, operators, and helpers.</p></li><li><p>Conduct training and skill development programs for P&amp;M personnel.</p></li><li><p>Foster a culture of safety, preventive maintenance, and ownership.</p></li></ul><br><p>Internal:</p><ul><li><p>Project Teams (Execution, Planning, Safety)</p></li><li><p>Procurement, Stores, and Finance Departments</p></li><li><p>Maintenance and Workshop Staff</p></li></ul><p>External:</p><ul><li><p>Equipment Suppliers &amp; Vendors</p></li><li><p>AMC &amp; Service Providers</p></li><li><p>Statutory Bodies / Regulatory Authorities</p></li></ul><br><br><ul><li><p>Operates within company policies and project-specific requirements.</p></li><li><p>Authorized to initiate equipment procurement, maintenance activities, and vendor negotiations (as per delegation).</p></li><li><p>Escalates critical budget, safety, or operational issues to senior management.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>MINIMUM QUALIFICATION: Bachelor’s Degree / Diploma in Mechanical Engineering or a related field. </p><ul><li><p>10–15 years of experience in managing P&amp;M in the construction industry</p></li><li><p>Experience in high-rise or large industrial projects preferred</p></li><li><p>5 to 10 Mandatory experience in UAE in similar role.</p></li></ul><p></p></section>