وظائف مهندس ميكانيكا معدات ثقيلة

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Job Title: Senior Piping Engineer – Offshore FEED Project<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;<span>Job Title: Senior Piping Engineer – Offshore FEED Project</span></u></b></p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high‑profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Contractors Office in Abu Dhabi for some time till administrative process is completed and the candidate will be moving outside UAE ( to an Asian Country) for 6 – 8 months and then returning to UAE.</p><br><br><p>The project duration is until 2028 with possible extension.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The Senior Piping Engineer is responsible for executing and coordinating piping engineering and design activities for ADNOC Offshore FEED projects. The role involves the development of piping layouts, material specifications, technical studies, and engineering deliverables for offshore oil and gas facilities while ensuring compliance with ADNOC Offshore standards, project specifications, international codes, and HSE requirements.</p><br><br><p>The successful candidate will support the design and optimization of offshore process facilities, ensuring safe, reliable, maintainable, and cost-effective piping systems throughout the FEED phase.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Piping Engineering &amp; Design</b></p><br><br><ul><li>Perform piping engineering activities for offshore FEED projects.</li><li>Develop and review:<ul><li>Piping Design Basis</li><li>Piping Material Specifications (PMS)</li><li>Pipe Class Specifications</li><li>Line Designation Tables</li><li>Piping General Arrangement (GA) Drawings</li><li>Plot Plans and Equipment Layouts</li><li>Piping Layout Drawings</li><li>Material Requisitions</li><li>Valve Specifications</li><li>Material Take-Offs (MTO)</li><li>Line Lists</li></ul></li><li>Ensure compliance with ADNOC standards and project specifications.</li><li>Support development of safe, operable, and maintainable piping layouts.</li></ul><br><p><b>FEED Engineering Deliverables</b></p><br><br><ul><li>Prepare and review FEED deliverables related to piping design.</li><li>Assist in the development of:<ul><li>Piping Philosophies</li><li>Design Criteria</li><li>Layout Studies</li><li>Tie-In Packages</li><li>Constructability Reviews</li><li>Engineering Reports</li></ul></li><li>Ensure engineering deliverables are completed within project schedules and quality requirements.</li><li>Support scope definition and cost estimation activities.</li></ul><br><p><b>Piping Layout &amp; Routing</b></p><br><br><ul><li>Develop piping layouts considering:<ul><li>Offshore space constraints</li><li>Equipment accessibility</li><li>Maintenance requirements</li><li>Safety and escape routes</li><li>Modularization requirements</li><li>Weight optimization</li></ul></li><li>Participate in 3D model reviews and layout optimization workshops.</li><li>Coordinate piping routing with process, structural, mechanical, electrical, and instrumentation disciplines.</li></ul><br><p><b>Piping Materials Engineering</b></p><br><br><ul><li>Review and apply material selection requirements for:<ul><li>Carbon Steel</li><li>Low-Temperature Carbon Steel</li><li>Stainless Steel</li><li>Duplex &amp; Super Duplex Stainless Steel</li><li>Nickel Alloys</li><li>GRE/GRP Systems</li></ul></li><li>Ensure material suitability for process conditions, corrosion control, and design life requirements.</li><li>Support corrosion studies and material selection reviews.</li></ul><br><p><b>Stress Analysis Coordination</b></p><br><br><ul><li>Identify stress-critical piping systems.</li><li>Coordinate with piping stress engineers on:<ul><li>Flexibility Analysis</li><li>Thermal Expansion Studies</li><li>Support Design</li><li>Sustained and Occasional Load Assessments</li><li>Vibration Assessments</li></ul></li><li>Review stress analysis inputs and recommendations.</li><li>Ensure compliance with piping stress and mechanical integrity requirements.</li></ul><br><b>Offshore &amp; Brownfield Projects</b><ul><li>Support design of piping systems for:<ul><li>Wellhead Platforms</li><li>Process Platforms</li><li>Utility Platforms</li><li>Gas Compression Facilities</li><li>Water Injection Facilities</li><li>Produced Water Facilities</li><li>Central Processing Facilities (CPF)</li></ul></li><li>Participate in brownfield modifications and revamp projects.</li><li>Review tie-in requirements, shutdown studies, and constructability constraints.</li><li>Support offshore site surveys when required.</li></ul><br><b>Vendor &amp; Package Engineering</b><ul><li>Review vendor package piping requirements and interfaces.</li><li>Coordinate with equipment vendors for:<ul><li>Pumps</li><li>Compressors</li><li>Pressure Vessels</li><li>Heat Exchangers</li><li>Gas Turbines</li><li>Utility Packages</li></ul></li><li>Review vendor drawings, nozzle orientations, and piping interface requirements.</li><li>Participate in technical bid evaluations and vendor clarification meetings.</li></ul><br><b>Safety &amp; Risk Management</b><ul><li>Participate in:<ul><li>HAZID Studies</li><li>HAZOP Reviews</li><li>Constructability Workshops</li><li>SIMOPS Reviews</li><li>Model Reviews</li></ul></li><li>Ensure piping arrangements meet process safety and operational requirements.</li><li>Promote inherently safer design principles.</li></ul><br><b>Multidisciplinary Coordination</b><ul><li>Coordinate with:<ul><li>Process Engineering</li><li>Mechanical Engineering</li><li>Structural Engineering</li><li>Civil Engineering</li><li>Electrical Engineering</li><li>Instrumentation &amp; Control Engineering</li><li>Pipeline Engineering</li><li>HSE Engineering</li></ul></li><li>Interface with ADNOC Offshore, PMC consultants, licensors, EPC contractors, and vendors.</li><li>Participate in project meetings, model reviews, and technical workshops.</li></ul><br><b>Education Requirements</b><ul><li>Bachelor's Degree in Mechanical Engineering or equivalent Engineering discipline.</li><li>Master's Degree is an added advantage.</li></ul><br><b>Experience Requirements</b><ul><li>Minimum <b>15 years</b> of piping engineering experience in Oil &amp; Gas projects.</li><li>Minimum <b>5 years of ADNOC Offshore project experience</b>.</li><li>Proven experience in <b>FEED and Detailed Engineering</b> phases.</li><li>Strong experience in:<ul><li>Offshore Oil &amp; Gas Facilities</li><li>Greenfield Developments</li><li>Brownfield Modifications</li><li>Process Plant Piping Systems</li></ul></li></ul><br><br><br> </div>

<ol><li><p>Equipment changeover & setup: Debug equipment during product-model changeover, including changing molds, adjusting sensor positions and setting PLC / HMI process parameters, and ensure the first article after setup is qualified.</p></li><li><p>Parameter optimization: During production, fine-tune equipment running parameters (pressure, temperature, speed, position, etc.) according to efficiency (UPH) and yield to reach the optimal production state.</p></li><li><p>Fault diagnosis: Resolve complex equipment faults that line maintenance technicians cannot handle, involving electrical-component replacement, pneumatic-circuit repair and simple control-program troubleshooting.</p></li><li><p>Inspection & PM: Execute weekly/monthly preventive maintenance (PM) plans, lubricating, fastening and calibrating key moving parts to reduce sudden downtime.</p></li><li><p>Spare-parts & tooling management: Keep and inspect equipment parts, wear parts and molds in the assigned area, and propose purchase requisitions to the ME Engineer.</p></li><li><p>Operator training: Guide line operators to run equipment correctly and safely, and correct wrong operations that could damage equipment.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Background: Technical school, secondary technical diploma or above, Mechatronics, Automation or Mechanical major.</p></li><li><p>Experience: 3+ years of equipment-tuning experience in electronics manufacturing; familiar with e-cigarette filling, labeling and packaging automation preferred.</p></li><li><p>Technical skills: Familiar with pneumatic components, servo/stepper motors and basic PLC logic; able to read electrical and mechanical assembly drawings.</p></li><li><p>Language: Basic English communication (reads English HMI screens and English equipment maintenance manuals).</p></li><li><p>Core qualities: Clear logical thinking, able to quickly identify root cause from fault symptoms; strong safety awareness (strict LOTO lockout/tagout).</p></li><li><p>Adaptability: Able to accept two-shift or overtime work during the factory's early phase; good service awareness and teamwork.</p></li></ol>

<p><strong>Job Purpose</strong></p><p>The MEP Procurement Engineer is responsible for managing the procurement of Mechanical, Electrical, and Plumbing (MEP) materials, equipment, and services required for construction projects. The role involves supplier sourcing, technical and commercial evaluation, negotiation, purchase order management, expediting, and coordination with engineering, project, commercial, and site teams to ensure materials are procured in accordance with project specifications, approved submittals, budget, quality requirements, and project schedules.</p><p><strong>Key Responsibilities</strong></p><p><strong>1. Procurement Planning</strong></p><ul><li><p>Review project drawings, specifications, BOQ, material schedules, and procurement schedules.</p></li><li><p>Identify long-lead and critical MEP materials and equipment.</p></li><li><p>Prepare and maintain procurement schedules aligned with project requirements.</p></li><li><p>Coordinate with engineering and project teams to establish material priorities and delivery dates.</p></li><li><p>Monitor procurement progress against project milestones.</p></li></ul><p><strong>2. Supplier & Subcontractor Management</strong></p><ul><li><p>Identify, prequalify, and develop reliable suppliers and subcontractors for MEP materials and services.</p></li><li><p>Obtain quotations from approved and qualified vendors.</p></li><li><p>Maintain an updated supplier/vendor database.</p></li><li><p>Evaluate suppliers based on technical capability, commercial competitiveness, quality, lead time, and delivery performance.</p></li><li><p>Develop alternative sources where required to mitigate supply-chain risks.</p></li></ul><p><strong>3. Technical & Commercial Evaluation</strong></p><ul><li><p>Review supplier quotations against project specifications, BOQ, drawings, and approved material requirements.</p></li><li><p>Prepare technical and commercial comparison statements.</p></li><li><p>Coordinate with MEP engineers and consultants for technical compliance and approvals.</p></li><li><p>Identify deviations, exclusions, qualifications, and commercial risks in supplier offers.</p></li><li><p>Support value engineering and cost-saving initiatives without compromising project specifications or quality.</p></li></ul><p><strong>4. Negotiation & Purchase Orders</strong></p><ul><li><p>Negotiate prices, payment terms, warranties, delivery schedules, and other commercial conditions.</p></li><li><p>Prepare purchase requisitions and purchase orders in accordance with company procedures.</p></li><li><p>Ensure purchase orders clearly define specifications, quantities, approved brands, delivery requirements, and contractual terms.</p></li><li><p>Follow up on order acknowledgements and resolve commercial or technical discrepancies.</p></li></ul><p><strong>5. Expediting & Delivery</strong></p><ul><li><p>Monitor supplier manufacturing and delivery schedules.</p></li><li><p>Coordinate with suppliers to ensure timely delivery of materials and equipment to site.</p></li><li><p>Expedite long-lead items and critical materials.</p></li><li><p>Track material status from order placement through manufacturing, inspection, shipment, and site delivery.</p></li><li><p>Coordinate inspections, testing, documentation, and factory acceptance tests where applicable.</p></li><li><p>Maintain procurement and delivery status reports.</p></li></ul><p><strong>6. MEP Material Knowledge</strong></p><p>The engineer should have working knowledge of procurement requirements for items such as:</p><p><strong>Mechanical:</strong></p><ul><li><p>HVAC equipment and accessories</p></li><li><p>Chillers, AHUs, FCUs, FAHUs</p></li><li><p>Pumps and pressurization systems</p></li><li><p>Ductwork and accessories</p></li><li><p>Pipes, valves, fittings, insulation</p></li><li><p>Fans and ventilation equipment</p></li><li><p>Fire-fighting equipment and materials</p></li></ul><p><strong>Electrical:</strong></p><ul><li><p>LV/MV cables and accessories</p></li><li><p>Switchgear, MCCs, DBs, SMDBs</p></li><li><p>Transformers</p></li><li><p>Generators and UPS systems</p></li><li><p>Lighting fixtures</p></li><li><p>Cable trays and trunking</p></li><li><p>Earthing and lightning protection systems</p></li><li><p>Electrical accessories and containment</p></li></ul><p><strong>Plumbing & Drainage:</strong></p><ul><li><p>Pipes, fittings, valves, and pumps</p></li><li><p>Water tanks</p></li><li><p>Sanitary fixtures</p></li><li><p>Water heaters</p></li><li><p>Drainage systems and accessories</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Typically <strong>3–7 years of experience</strong> in MEP procurement within construction, MEP contracting, or EPC projects.</p></li><li><p>Experience with commercial buildings, residential developments, hotels, hospitals, infrastructure, or industrial projects is advantageous.</p></li><li><p>Experience handling local and international suppliers is preferred.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Specialist Expeditor Engineer ( Offshore Topside Project)<br><br><p><b><span>JOB TITLE: <u>Specialist Expeditor Engineer ( Offshore Topside Project)</u></span></b></p><br><br><br><p><b><i><span>Belong, Connect, Grow, with KBR!</span></i></b></p><br><br><br><p><b><i><span>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</span></i></b></p><br><br><br><p>KBR Abu Dhabi is currently looking to fill a position of <b><u><span>Specialist Expeditor Engineer ( Offshore Topside Project)</span></u></b> for an <b><span>Offshore Project </span></b>to be based in <b><span>Abu Dhabi in Office.</span></b></p><br><br><p><span>The Expeditor Engineer is responsible for ensuring the timely procurement, manufacturing, inspection, and delivery of materials and equipment required for offshore projects. The role focuses on expediting vendor activities, monitoring production schedules, resolving delays, and coordinating with suppliers, freight forwarders, inspection agencies, and project teams to meet project milestones.</span></p><br><br><p>Profile matching below criteria only will be contacted.</p><br><br><br><p><b><span>Key Responsibilities</span></b></p><br><br><br><p><b><span>Procurement &amp; Expediting</span></b></p><br><br><ul><li><span>Review <b>purchase orders, contracts, and technical specifications</b> for offshore materials and equipment</span></li><li><span>Develop and maintain <b>expediting plans</b> aligned with project schedules</span></li><li><span>Monitor vendor <b>manufacturing, fabrication, testing, and documentation progress</b></span></li><li><span>Follow up with suppliers to ensure compliance with <b>agreed delivery dates and milestones</b></span></li><li><span>Identify potential delays and implement <b>mitigation and recovery plans</b></span></li></ul><p><b><span>Vendor &amp; Supplier Coordination</span></b></p><br><br><ul><li><span>Act as the main point of contact between <b>suppliers, vendors, and internal teams</b></span></li><li><span>Conduct regular <b>progress meetings</b> with vendors (virtual or onsite)</span></li><li><span>Coordinate with vendors for <b>FAT, inspections, and material release</b></span></li><li><span>Expedite critical and long‑lead items essential for offshore installation</span></li></ul><p><b><span>Inspection, Logistics &amp; Documentation</span></b></p><br><br><ul><li><span>Coordinate with <b>third-party inspection agencies</b> for offshore equipment</span></li><li><span>Ensure timely completion and submission of <b>vendor documents, MRBs, and certificates</b></span></li><li><span>Liaise with logistics and freight forwarding teams for <b>shipping, customs clearance, and offshore delivery</b></span></li><li><span>Track packing, preservation, and marking requirements for offshore conditions</span></li></ul><p><b><span>Reporting &amp; Stakeholder Communication</span></b></p><br><br><ul><li><span>Prepare and issue <b>weekly/monthly expediting and procurement status reports</b></span></li><li><span>Highlight risks related to delivery schedules, quality, or compliance</span></li><li><span>Coordinate closely with <b>Engineering, QA/QC, Planning, Construction, and Offshore teams</b></span></li></ul><p><b><span>Compliance &amp; Quality</span></b></p><br><br><ul><li><span>Ensure materials and equipment meet <b>offshore standards and project specifications</b> (API, ASME, ISO, NORSOK, etc.)</span></li><li><span>Verify compliance with <b>HSE requirements</b> for offshore projects</span></li><li><span>Support audits, inspections, and vendor assessments as required</span></li></ul><br><br><p><b><u>Qualification &amp; Experience</u></b></p><br><br><br><ul><li>Minimum Overall 15+ years of experience in Oil and Gas industry.</li><li>Strong expertise in all aspects of procurement activities within the Offshore Oil &amp; Gas industry.</li><li>Having minimum 5+ years of previous experience working in <b><span>ADNOC Projects.</span></b></li><li><b>5–10 years</b> of experience in procurement and expediting, preferably in <b>offshore oil &amp; gas or EPC projects.</b></li><li><b>Strong experience handling long‑lead offshore equipment (valves, piping, rotating equipment, packages, etc.) </b></li><li><b>Prior experience in vendor expediting, inspections, and logistics coordination</b></li><li>Must have worked at least 5 years of experience in similar position for mega oil and gas FEED/ EPC project ( more than US$ 1 Billion).</li><li>Bachelor’s degree in Mechanical Engineering is a MUST.</li></ul><br><br><br><br><br> </div>

<ul><li><p>3 axle mechanic , actross, volvo, scania <br>Diagnose and repair complex mechanical, hydraulic, and electrical issues on a variety of trailer types, ensuring roadworthiness and safety.</p></li><li><p>Perform routine preventive maintenance, including inspections, lubrication, and adjustments, to minimize downtime and extend trailer lifespan.</p></li><li><p>Conduct thorough brake system inspections and repairs, including adjustments, component replacements, and ABS system diagnostics.</p></li><li><p>Service and repair suspension and steering systems, addressing issues like worn bushings, kingpins, and alignment problems.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or GED; vocational training in heavy equipment or diesel mechanics is highly preferred.</li><li>ASE or equivalent certifications in Medium/Heavy Duty Truck or Trailer Systems are a significant advantage.</li><li>Minimum of 3-5 years of hands-on experience specifically with trailer repair and maintenance.</li><li>Proficiency in diagnosing and repairing air brake systems, ABS, and electrical components is essential.</li></ul>

<p>1- Sales Engineer Job Description: Mechanical / Chemical Engineering Or relevant qualification. Relevant Exp in water treatment field • Acquire new customers by winning them over from competitors and discovering new opportunities. • Serves customers by identifying their needs and engineering adaptations of products, equipment, and services. • Visit and meet with clients at appointments for sales to achieve the planned target. • Provides product, service, or equipment technical and engineering information by answering questions and requests. • Establishes new customer’ accounts by identifying potential customers and planning and organizing sales call/visit schedule. • Collaborate with sales teams to understand customer requirements and provide sales support. • Gains customer acceptance by explaining or demonstrating cost reductions and operations improvements. • Prepares sales engineering reports by collecting, analyzing, and summarizing sales information, engineering. • Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, and participating in professional societies. • Preparing and maintaining all reports as per the company policy “Visits, Leads, Orders & Sales”. • Reporting to the Manager In-charge & Sales Manager</p><p>Candidate Requirements: Education: Bachelor’s Degree in Chemical Engineering or Mechanical Engineering. Experience: Minimum 3–5 years of relevant experience in Water Treatment / Water Treatment Systems. Language: Good English communication skills; Arabic is an added advantage. Salary: AED 2,000–3,000 per month, depending on experience and qualifications. Technical Knowledge: Strong knowledge of Water Treatment processes, equipment, chemical treatment, mechanical systems, and related operations. UAE Experience: UAE experience in the Water Treatment industry is preferred. Availability: Immediate joiners or candidates with a short notice period are preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> </span><p><span><span>The purpose of this position is to supervise and lead a team of Rolling Stock Technicians to provide effective engineering and maintenance services covering passenger trains and engineering vehicles for Dubai Metro.</span></span></p><br> <p><span><span><b>MAIN RESPONSIBILITIES</b></span></span></p><br> <ul> <li><span><span>Assist the Rolling Stock Engineer in leading a team of technicians out in the field to carry out all level of preventive and corrective maintenance activities and minor modifications on rolling stock including passenger service vehicles, engineering support vehicles, shunting vehicles and wagons.</span></span></li> <li><span><span>Supervise routine vehicle inspections, inspecting parts for surface defects, changing of consumable items, perform minor repairs and technical cleaning.</span></span></li> <li><span><span>Manage the testing of functional performance of electromechanical assemblies using various test instruments, replace, install electrical and electronic parts and hardware in housings or assemblies, align, fit, and assemble component parts, using electronics tools, hand tools, power tools, fixtures, templates, and microscopes.</span></span></li> <li><span><span>Supervise the operations of metalworking machines, repair, rework, and calibrate hydraulic and pneumatic assemblies and systems, verify dimensions and clearances of parts to ensure conformance to specifications and to meet operational specifications and tolerances.</span></span></li> <li><span><span>Manage and perform time sensitive fault diagnostics and component replacement (repair in situ or inside depot) on the rolling stock.</span></span></li> <li><span><span>Read blueprints, schematics, diagrams, and technical orders to determine methods and sequences of assembly, analyse and record test results, and prepare written testing documentation. Follow the appropriate maintenance procedures and instructions, operating procedures and instructions to ensure compliance with the required requirements.</span></span></li> <li><span><span>Supervise wheel truing of the rolling stock annually or as required using under-floor wheel lathe, perform bogie overhaul at every four and eight years by inspecting and repairing major bogie components such as traction motors, gear-boxes, wheel-sets, and axle boxes in special purpose-built workshops.</span></span></li> <li><span><span>Lead Rolling Stock Technicians in understanding and servicing of complex or new equipment.</span></span></li> <li><span><span>Lead the maintenance team to perform train rescue on mainline, such as re-railing of trains or engineering vehicle.</span></span></li> <li><span><span>Assist the Rolling Stock Engineer or other technical support staff to implement complex systems or new projects.</span></span></li> <li><span><span>Produce and maintain accurate maintenance records of rolling stock, work accomplished and other information using a computerized maintenance management system, such as MMS.</span></span></li> <li><span><span>Require to work on shift duty.</span></span></li> <li><span><span>Drive work vehicles when responding to emergencies and when required on duty.</span></span></li> <li><span><span>Implement and follow Permit To Work process.</span></span></li> <li><span><span>Carry out competence assessment of Rolling Stock Technicians following appropriate competence.</span></span></li> <li><span><span>Performs the role of Key Instructor to conduct relevant training courses.</span></span></li> </ul> <p><span><span><b>KNOWLEDGE REQUIRED</b></span></span></p><br> <ul> <li><span><span><span>Working knowledge in maintaining and repairing car body, bogies and suspension, couplers and draft gears, operators' control, propulsion system, friction brakes, batteries, auxiliary power supply and electrical equipment, car doors and doors control, ventilation and air-conditioning components, train control and monitoring system for rolling stock is desirable</span></span></span></li> </ul> <p><span><span><b>KEY SKILLS</b></span></span></p><br> <ul> <li><span><span>Must have good eyesight and normal colour vision.</span></span></li> <li><span><span>Strong mechanical mind, and ability to grasp the complexity of inner workings of rolling stock.</span></span></li> <li><span><span>Ability to use and calibrate various electrical, electronic and mechanical test equipment and PC for the maintenance of rolling stock.</span></span></li> <li><span><span>Ability to write simple technical reports, routine business correspondence, prepare method statements and drawings as required.</span></span></li> <li><span><span>Possess good communication skills and the ability to manage multiple tasks efficiently and work productively in a fast-paced, team-oriented environment.</span></span></li> <li><span><span>Strong organisational skills, detail oriented, and the ability to handle multiple priorities.</span></span></li> <li><span><span><span>Preferably holds a valid UAE driving license with good driving skill and experience.</span></span></span></li> </ul> <p><span><span><b>EXPERIENCE</b></span></span></p><br> <ul> <li><span><span>Must have minimum 2 years work experience as a qualified Electrical, Mechanical, or Electro-Mechanical technician in maintaining and repairing rolling stock.</span></span></li> <li><span><span><span>Shoud have 1 year of supervisory experience leading a line maintenance team servicing and repairing rolling stock.</span></span></span></li> </ul> <p><span><span><b>EDUCATIONAL QUALIFCATION</b></span></span></p><br> <ul> <li><span><span>Mush hold v<span>ocational trade certificate,&nbsp;diploma or degree in Electrical or Mechanical Engineering discipline or equivalent</span>.</span></span></li> </ul> </div>

<ul><li>Conduct detailed land surveys to determine property boundaries, topography, and site conditions using advanced surveying equipment and technology.</li><li>Prepare precise survey drawings and maps that accurately represent land configurations and features for use in construction and development projects.</li><li>Coordinate with civil engineers and architects to ensure survey data aligns with project specifications and design requirements.</li><li>Analyze survey data and provide technical reports to stakeholders, highlighting potential challenges and recommending solutions.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil Engineering, Geomatics, or a related field from an accredited institution.</li><li>Professional licensure as a land surveyor (if applicable) or willingness to pursue licensure within a specified timeframe.</li><li>Minimum of 3-5 years of relevant surveying experience in construction, land development, or infrastructure projects.</li><li>Proficiency in using surveying software and tools, such as AutoCAD, Civil 3D, and GIS applications.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>JOB TITLE: Lead Construction Brownfield Site Engineer ( Offshore Water Injection Project)<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><span>JOB TITLE: <u>&nbsp;Lead Construction Brownfield Site Engineer ( Offshore Water Injection Project)</u></span> </b></p><br><br><p><b><i>ob Purpose</i></b></p><br><br><p><b><i>The Lead Construction Brownfield Site Engineer is responsible for planning, coordinating, and overseeing all brownfield construction activities associated with the Offshore Water Injection Project. The role ensures the safe and efficient execution of construction, tie-ins, modifications, equipment installation, and integration works within existing operating offshore facilities.</i></b></p><br><br><p><b><i>The position serves as the primary site focal point for brownfield execution, ensuring that all activities are completed in compliance with project specifications, HSE requirements, quality standards, and operational constraints while minimizing disruption to ongoing production and facility operations.</i></b></p><br><br><p><b><i>Key Responsibilities</i></b></p><br><br><p><b><i>Brownfield Construction Management</i></b></p><br><br><ul><li><b><i>Lead and coordinate all brownfield construction activities offshore throughout the project lifecycle.</i></b></li><li><b><i>Manage construction execution for modifications to existing facilities related to water injection systems and associated infrastructure.</i></b></li><li><b><i>Ensure safe execution of brownfield works within operational offshore environments.</i></b></li><li><b><i>Oversee installation, replacement, and modification of: </i></b><ul><li><b><i>Process piping systems</i></b></li><li><b><i>Water injection pumps and skids</i></b></li><li><b><i>Valves and pressure equipment</i></b></li><li><b><i>Structural steel modifications</i></b></li><li><b><i>Electrical equipment</i></b></li><li><b><i>Instrumentation and control systems</i></b></li><li><b><i>Mechanical equipment and packages</i></b></li></ul></li><li><b><i>Ensure construction activities are executed in accordance with approved work packs, procedures, drawings, and specifications.</i></b></li></ul><br><p><b><i>Offshore Site Coordination</i></b></p><br><br><ul><li><b><i>Act as the primary interface between Construction, Operations, Commissioning, Engineering, and Contractor teams.</i></b></li><li><b><i>Coordinate daily execution activities to ensure work fronts are available and safely accessible.</i></b></li><li><b><i>Facilitate communication between offshore operations personnel and project execution teams.</i></b></li><li><b><i>Support shutdowns, tie-ins, and SIMOPS activities to minimize production impact.</i></b></li><li><b><i>Monitor contractor performance and construction productivity.</i></b></li></ul><br><p><b><i>Planning &amp; Execution</i></b></p><br><br><ul><li><b><i>Review construction schedules and ensure alignment with project milestones.</i></b></li><li><b><i>Participate in construction work pack reviews and constructability assessments.</i></b></li><li><b><i>Coordinate manpower, equipment, materials, and logistics required for offshore execution.</i></b></li><li><b><i>Monitor progress against schedules and identify recovery measures for delays.</i></b></li><li><b><i>Ensure effective coordination of offshore campaigns and shutdown activities.</i></b></li><li><b><i>Support planning and implementation of critical-path construction activities.</i></b></li></ul><br><p><b><i>Brownfield Modifications &amp; Tie-Ins</i></b></p><br><br><ul><li><b><i>Lead site execution of brownfield modifications including: </i></b><ul><li><b><i>Facility upgrades</i></b></li><li><b><i>Equipment replacements</i></b></li><li><b><i>Pipework modifications</i></b></li><li><b><i>Live plant tie-ins</i></b></li><li><b><i>Utility system modifications</i></b></li><li><b><i>Structural upgrades</i></b></li></ul></li><li><b><i>Ensure tie-in activities are executed safely and in accordance with approved shutdown plans.</i></b></li><li><b><i>Review isolation plans and construction method statements.</i></b></li><li><b><i>Coordinate with Operations to ensure facility integrity and continuity of production.</i></b></li></ul><br><p><b><i>HSE Leadership</i></b></p><br><br><ul><li><b><i>Champion a strong safety culture and ensure strict compliance with project HSE requirements.</i></b></li><li><b><i>Ensure all construction activities comply with: </i></b><ul><li><b><i>Permit-to-Work (PTW) Systems</i></b></li><li><b><i>SIMOPS Procedures</i></b></li><li><b><i>Energy Isolation Procedures</i></b></li><li><b><i>Working at Height Requirements</i></b></li><li><b><i>Lifting and Rigging Standards</i></b></li><li><b><i>Confined Space Entry Requirements</i></b></li><li><b><i>Offshore Safety Regulations</i></b></li></ul></li><li><b><i>Conduct regular toolbox talks, safety walkdowns, and site inspections.</i></b></li><li><b><i>Participate in incident investigations and implementation of corrective actions.</i></b></li><li><b><i>Ensure workforce compliance with Life-Saving Rules and project HSE standards.</i></b></li></ul><br><p><b><i>Quality Assurance &amp; Control</i></b></p><br><br><ul><li><b><i>Ensure construction activities comply with approved drawings, specifications, and quality requirements.</i></b></li><li><b><i>Participate in inspections, walkdowns, and punch-list management.</i></b></li><li><b><i>Verify completion of construction documentation and quality records.</i></b></li><li><b><i>Ensure non-conformances are properly reported and resolved.</i></b></li><li><b><i>Support Mechanical Completion and System Handover processes.</i></b></li></ul><br><p><b><i>Contractor Management</i></b></p><br><br><ul><li><b><i>Supervise EPC contractors, subcontractors, and offshore construction teams.</i></b></li><li><b><i>Review contractor construction methodologies, execution plans, and work procedures.</i></b></li><li><b><i>Monitor contractor performance against HSE, quality, productivity, and schedule objectives.</i></b></li><li><b><i>Ensure contractor compliance with company standards and contractual obligations.</i></b></li><li><b><i>Participate in contractor meetings and performance reviews.</i></b></li></ul><br><p><b><i>Commissioning &amp; Start-Up Support</i></b></p><br><br><ul><li><b><i>Support pre-commissioning, commissioning, and start-up activities.</i></b></li><li><b><i>Ensure construction punch items are closed in line with project priorities.</i></b></li><li><b><i>Participate in system walkdowns and turnover activities.</i></b></li><li><b><i>Coordinate correction of deficiencies identified during commissioning.</i></b></li><li><b><i>Support operational readiness and final handover to Operations.</i></b></li></ul><br><p><b><i>Stakeholder Management</i></b></p><br><br><ul><li><b><i>Liaise with: </i></b><ul><li><b><i>Operations Teams</i></b></li><li><b><i>Maintenance Teams</i></b></li><li><b><i>Project Management</i></b></li><li><b><i>Engineering Disciplines</i></b></li><li><b><i>Commissioning Teams</i></b></li><li><b><i>HSE Teams</i></b></li><li><b><i>Contractors and Vendors</i></b></li></ul></li><li><b><i>Provide accurate project updates and construction status reports.</i></b></li><li><b><i>Escalate critical issues requiring management intervention.</i></b></li></ul><br><p><b><i>Reporting &amp; Documentation</i></b></p><br><br><ul><li><b><i>Prepare daily, weekly, and monthly construction progress reports.</i></b></li><li><b><i>Track offshore construction KPIs and productivity metrics.</i></b></li><li><b><i>Report construction risks, constraints, and mitigation plans.</i></b></li><li><b><i>Maintain construction records, site instructions, work permits, and project documentation.</i></b></li><li><b><i>Support project close-out and lessons learned activities.</i></b></li></ul><br><p><b><i>Qualifications</i></b></p><br><br><ul><li><b><i>Must have 18-22 yrs of experience in Oil &amp; Gas industry with 5-7 years in Offshore Sector.</i></b></li><li><b><i>Bachelor's Degree in Mechanical, Civil, Structural, Electrical, Marine, or related Engineering discipline.</i></b></li><li><b><i>Professional Engineering registration or equivalent certification preferred.</i></b></li><li><b><i>Offshore construction and project management certifications are advantageous.</i></b></li></ul><p><b><i>Preferred Certifications</i></b></p><br><br><ul><li><b><i>PMP or equivalent project management certification.</i></b></li><li><b><i>BOSIET / FOET.</i></b></li><li><b><i>H2S Awareness Certification.</i></b></li><li><b><i>Offshore Supervisory Safety Training.</i></b></li><li><b><i>Rigging and Lifting Awareness Training.</i></b></li><li><b><i>Permit-to-Work Authorisation (as applicable).</i></b></li></ul><br><br><br> </div>

<p>Liberty Car Care is seeking a highly skilled and experienced <strong>Automobile Engineer</strong> with strong multi-brand experience to join our workshop team in Abu Dhabi. The ideal candidate should have hands-on expertise in vehicle inspection, advanced fault diagnostics, mechanical and electrical troubleshooting, and workshop quality control across various vehicle makes and models.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Perform comprehensive diagnostic tests and computer scans using advanced automotive tools on multi-brand vehicles (European, Asian, American).</p></li><li><p>Diagnose complex mechanical, electrical, and electronic faults accurately and efficiently.</p></li><li><p>Supervise, guide, and inspect repairs carried out by workshop technicians to ensure high quality and safety standards.</p></li><li><p>Conduct final quality control inspections and test drives to verify repair completion.</p></li><li><p>Prepare clear technical reports on vehicle conditions, required repairs, and spare parts list for Service Advisors.</p></li><li><p>Ensure all repairs meet workshop safety standards and original equipment manufacturer (OEM) guidelines.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>Multi-Brand Experience:</strong> <strong>Must have 3 to 5 years of proven hands-on experience working across multiple car brands (European, Asian, and American) in a multi-brand workshop environment.</strong></p></li><li><p><strong>Diagnostic & Technical Expertise:</strong> Strong expertise in multi-brand vehicle diagnostics, electrical troubleshooting, engine repair, and complex mechanical fault detection.</p></li><li><p><strong>Diagnostic Tools:</strong> Hands-on experience operating multi-brand diagnostic scanners and tools (e.g., Launch, Autel, OEM equipment).</p></li><li><p><strong>Quality & Workshop Operations:</strong> Ability to perform thorough quality checks, pre-purchase inspections, and technical reporting for service advisors.</p></li><li><p><strong>Education:</strong> Diploma or Bachelor's Degree in Automotive / Mechanical Engineering (or equivalent technical certification).</p></li><li><p><strong>Location & Availability:</strong> Currently residing in the UAE (or ready to relocate to Abu Dhabi) with immediate or short-notice availability.</p></li></ol>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job DATA CENTER COMMISSIONING ENGINEER - ELECTRICAL <p>We are seeking an experienced Data Center Commissioning Engineer – Electrical to support electrical commissioning activities. The candidate will coordinate electrical commissioning activities, system preparation, testing, energization, start-up and handover in accordance with approved procedures and project requirements.</p><br> <p>JOB RESPONSIBILITIES</p><br> <ul><li>Support planning and execution of electrical pre-commissioning and commissioning activities.</li><li>Review electrical drawings, single-line diagrams, schematics, equipment datasheets, specifications, cause &amp; effect diagrams and commissioning procedures.</li><li>Coordinate with construction, engineering, operations, mechanical, instrumentation, controls and other disciplines.</li><li>Verify system readiness and mechanical completion prior to electrical commissioning.</li><li>Support electrical system preparation, inspection, testing, energization and functional testing activities.</li><li>Participate in commissioning, energization, start-up and performance testing activities.</li><li>Identify and resolve electrical-related technical and commissioning issues.</li><li>Prepare and maintain commissioning check sheets, test records, punch lists and system handover documentation.</li><li>Coordinate with vendors and subcontractors during commissioning and start-up.</li><li>Support pre-start-up reviews, system handover and punch clearance.</li><li>Ensure commissioning activities comply with approved procedures, project specifications and HSE requirements.</li></ul> <p>KEY QUALIFICATIONS</p><br> <ul><li>Bachelor's degree in Electrical Engineering or equivalent.</li><li>8+ years of Data Center / Electrical Engineering experience, with strong commissioning exposure.</li><li>Experience in electrical pre-commissioning, commissioning and start-up activities.</li><li>Strong knowledge of electrical systems, single-line diagrams and commissioning procedures.</li><li>Data Center project experience preferred.</li><li>Site-based experience in major EPC projects preferred.</li><li>Ability to coordinate effectively with multidisciplinary commissioning teams.</li><li>Strong troubleshooting and technical problem-solving skills.</li><li>Good understanding of HSE requirements during commissioning and start-up.</li><li>Candidates with major Data Center commissioning experience are preferred.</li><li>Immediate availability / short notice preferred.</li></ul> <p>VERTICAL</p><br> <p>ENGINEERING</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Code:</strong> 200/001/555<br><strong>Industry:</strong> Commercial Kitchen Equipment / HVAC / Ventilation<br><br>We are seeking a <strong>Mechanical Engineer</strong> with experience in <strong>commercial kitchen ventilation systems, particularly kitchen ventilation hoods</strong>.<br>The role focuses on the technical development of new and existing commercial kitchen ventilation hood products, including prototyping, testing, supplier qualification, and commissioning of <strong>Demand-Controlled Kitchen Ventilation (DCKV) systems</strong>.<br>The Mechanical Engineer will work closely with the R&amp;D Manager, 3D Designer, and cross-functional teams, including Production, Quality, and Projects, to develop reliable, high-quality commercial kitchen ventilation products.<br><strong>Product / System Exposure:</strong><br><ul><li>Commercial kitchen ventilation hoods</li><li>Kitchen extraction and ventilation systems</li><li>Demand-Controlled Kitchen Ventilation (DCKV) systems</li><li>Airflow and extraction systems</li><li>Ventilation controls and sensors</li></ul><br><br><ul><li>Develop and improve commercial kitchen ventilation hoods, working with the 3D Designer to translate requirements into manufacturable products.</li><li>Write test plans and protocols for hood performance, including airflow, capture/containment, grease extraction, noise, and other relevant parameters.</li><li>Carry out physical tests in the laboratory and on-site, record and analyse results, and report findings.</li><li>Identify root causes of test failures and drive corrective design actions.</li><li>Identify, evaluate, and vet suppliers for components and materials, including inspection, sample testing, and documentation review.</li><li>Commission demand-controlled ventilation systems on-site, including sensor setup, calibration, and control logic verification.</li><li>Troubleshoot demand-controlled ventilation performance issues in the field.</li><li>Review supplier documentation, including datasheets, manuals, test reports, and certifications.</li><li>Plan and execute structured testing activities efficiently.</li><li>Travel occasionally for site commissioning across the UAE and GCC region.</li><li>Work flexible hours, including weekends and evenings, when required by project deadlines.</li></ul><br><br><ul><li>Bachelor of Science (BSc) in <strong>Mechanical Engineering</strong> or a closely related field.</li><li><strong>3–5 years of relevant experience</strong> in product development, ideally involving HVAC, ventilation, or commercial kitchen equipment.</li><li><strong>Mandatory experience with commercial kitchen ventilation systems, particularly kitchen ventilation hoods.</strong></li><li>Strong understanding of airflow, extraction, and demand-controlled ventilation principles.</li><li>Experience in writing and executing structured test plans.</li><li>Comfortable reviewing supplier documentation, including datasheets, manuals, test reports, and certifications.</li><li>Working knowledge of <strong>DW 172, EN 16282, and ASHRAE Standard 154</strong>.</li><li>Self-motivated and proactive in planning tests, making decisions, and organising work efficiently.</li><li>Familiarity with <strong>3D CAD (Autodesk Inventor)</strong> would be an advantage.</li><li>Willingness to travel occasionally for site commissioning across the UAE and GCC region.</li><li>Willingness to work flexible hours, including weekends and evenings, as required by project deadlines.</li><li>Hands-on, structured, and detail-oriented approach to problem-solving.</li></ul><br><br><em>Please visit our </em><strong><em>jobs</em></strong><em> page to check out our current list of jobs in UAE and across the world.</em><br><em>Follow us on </em><strong><em>LinkedIn</em></strong><em> and </em><strong><em>Facebook</em></strong><em> to stay updated regarding our upcoming opportunities.</em><br><em>Subscribe to our </em><strong><em>LinkedIn newsletter</em></strong><em> for weekly job updates.</em><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Job Title: Specialist Engineer - Asset/SPIR coordination (Offshore -WHTs, Subsea Cable &amp; Piping , B/Fs)<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;<span>Job Title: Specialist Engineer - Asset/SPIR coordination (Offshore -WHTs, Subsea Cable &amp; Piping , B/Fs)</span></u></b></p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high‑profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Contractors Office/ Fabrication Yard Office in Abu Dhabi for some time and then if required by client team will later move to Offshore Site on 6 weeks on/ 3 weeks off rotation.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The Specialist Engineer - Asset/SPIR Coordination is responsible for managing and coordinating Asset Register development, SPIR (Spare Parts Interchangeability Record) documentation, equipment master data, and project handover deliverables for offshore facilities. The role ensures that all asset information, spare parts data, maintenance requirements, and equipment records associated with Wellhead Towers (WHTs), subsea cable systems, offshore piping systems, boat landings, foundation brackets, and associated infrastructure are complete, accurate, and compliant with company and client requirements.</p><br><br><p>The position acts as the focal point between Engineering, Procurement, Construction, Commissioning, Operations, Maintenance, and Supply Chain teams to ensure seamless transfer of asset information from project execution into operational systems.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Asset Data Management</b></p><br><br><ul><li>Develop, maintain, and coordinate asset registers for offshore projects.</li><li>Ensure accurate asset hierarchy and equipment tagging structures are established.</li><li>Verify completeness of equipment records and associated technical documentation.</li><li>Coordinate asset master data creation and validation within client systems.</li><li>Support digital asset management and lifecycle information requirements.</li></ul><p><b>SPIR Coordination</b></p><br><br><ul><li>Review and validate Vendor SPIR submissions.</li><li>Ensure spare parts recommendations are aligned with operational and maintenance requirements.</li><li>Coordinate with vendors, procurement teams, and maintenance departments regarding spare parts requirements.</li><li>Evaluate criticality and stocking levels of recommended spares.</li><li>Verify interchangeability and standardization of spare parts across offshore facilities.</li><li>Ensure compliance with client SPIR procedures and contractual requirements.</li></ul><p><b>Engineering &amp; Project Support</b></p><br><br><ul><li>Coordinate engineering deliverables associated with asset management and lifecycle data.</li><li>Review vendor documentation to ensure asset information completeness.</li><li>Participate in design reviews to ensure maintainability and operability requirements are incorporated.</li><li>Support technical clarification and resolution of asset data issues during project execution.</li><li>Coordinate with package engineers and discipline engineers to capture equipment data accurately.</li></ul><p><b>Offshore Facilities Coordination</b></p><br><br><p>Provide asset and SPIR coordination support for:</p><br><br><ul><li>Wellhead Towers (WHTs)</li><li>Offshore piping systems</li><li>Subsea cable systems</li><li>Boat Landings</li><li>Foundation Brackets (B/Fs)</li><li>Structural steel assemblies</li><li>Utility systems</li><li>Mechanical packages</li><li>Electrical equipment</li><li>Instrumentation and control systems</li></ul><p><b>Project Handover &amp; Commissioning Support</b></p><br><br><ul><li>Coordinate project handover documentation to operations teams.</li><li>Support commissioning and start-up teams with asset information requirements.</li><li>Verify completeness of turnover dossiers and operation manuals.</li><li>Ensure asset records are properly migrated into CMMS or ERP systems.</li><li>Participate in project close-out activities and final asset verification.</li></ul><p><b>Stakeholder Coordination</b></p><br><br><ul><li>Interface with Engineering, Procurement, Construction, Commissioning, Operations, Maintenance, and Supply Chain teams.</li><li>Liaise with vendors to obtain required asset and spare parts information.</li><li>Support client audits and asset data reviews.</li><li>Participate in technical meetings and project progress reviews.</li></ul><p><b>Quality &amp; Compliance</b></p><br><br><ul><li>Ensure compliance with company procedures and client asset management standards.</li><li>Verify documentation quality and completeness.</li><li>Support document control activities related to asset data and SPIR records.</li><li>Assist in resolving NCRs and asset information discrepancies.</li></ul><br><p><b>Qualifications</b></p><br><br><p><b>Education</b></p><br><br><ul><li>Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Instrumentation Engineering, Industrial Engineering, or related discipline.</li><li>Professional certifications in Asset Management or Maintenance Management are advantageous.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>Minimum <b>15-18 years</b> of experience in offshore oil and gas, EPC/EPCI, fabrication, or asset management projects.</li><li>Minimum <b>5 years</b> of experience in Asset Coordination, SPIR Management, Master Data Management, or Project Handover.</li><li>Demonstrated experience supporting offshore facilities including:<ul><li>Wellhead Towers (WHTs)</li><li>Subsea cable systems</li><li>Offshore piping systems</li><li>Boat landings</li><li>Foundation brackets and structural systems</li></ul></li><li>Experience with brownfield and greenfield offshore projects preferred.</li><li>Middle East offshore project experience is advantageous.</li></ul><br><br><br> </div>

<p>My client a well establish design practice in Dubai are seeking an experienced and technically strong Senior Mechanical Engineer - MEP Design to lead the design, coordination, and delivery of Mechanical, Public Health, and Fire Protection systems across projects in the UAE and wider GCC region. This is a hands-on senior role requiring strong technical ownership from initial feasibility and concept design through detailed design, tender, construction, testing and commissioning, and final handover. The successful candidate will be responsible for independently developing, reviewing, and technically justifying engineering solutions while coordinating closely with clients, consultants, contractors, landlords, authorities, and multidisciplinary design teams. The role is particularly suited to an engineer with strong experience in workplace and commercial fit-outs, refurbishment projects, new-build developments, laboratories, healthcare facilities, warehouses, and specialist technical environments. Key Responsibilities * Lead the design and coordination of HVAC, Public Health/Plumbing, and Fire Protection systems through Concept, Schematic Design, Detailed Design, Tender, Construction, and Handover stages. * Prepare and review engineering calculations including cooling and heating loads, fresh-air and ventilation requirements, duct and pipe sizing, pressure-loss calculations, pump duties, water demand, drainage, fire-water demand, and sprinkler hydraulics. * Design and review chilled-water, DX, VRF/VRV, FCU, AHU, FAHU, ventilation, extract, domestic water, drainage, and fire-fighting systems. * Select and technically evaluate mechanical equipment against design loads, system performance, energy efficiency, acoustic requirements, and operating conditions. * Establish the Basis of Design, design criteria, engineering strategy, and system approach for assigned projects. * Assess existing and base-build MEP systems, capacities, connection points, landlord provisions, and site constraints for fit-out and refurbishment projects. * Develop practical engineering solutions around ceiling, structural, operational, existing-services, and spatial constraints. * Coordinate closely with Interior Design, Architecture, Structural, Electrical, Lighting, AV/IT/Security, Acoustics, Fire & Life Safety, and other specialist disciplines. * Lead and review technical drawings, calculations, specifications, schedules, reports, schematics, and tender documentation. * Carry out internal QA/QC reviews and ensure designs are technically compliant, coordinated, buildable, and aligned with project requirements. * Review contractor shop drawings, material submittals, RFIs, technical proposals, Value Engineering proposals, and equipment substitutions. * Attend site inspections, technical meetings, testing and commissioning activities, and support snagging and final handover. * Represent the MEP team in client, contractor, landlord, consultant, and authority meetings. * Communicate technical, cost, programme, and operational implications of design decisions and changes. * Provide technical guidance and mentoring to junior engineers and designers. * Proactively identify design and construction risks and resolve technical issues before they impact project delivery.</p><p>Desired Candidate Profile * Bachelor>s Degree in Mechanical Engineering or equivalent from a recognised university. * Minimum 8 years of relevant MEP engineering experience, with strong UAE and/or GCC experience preferred. * Strong consultancy and design background with proven experience delivering projects from feasibility and concept through construction and handover. * Extensive experience in commercial interiors, workplace fit-outs, refurbishment, and renovation projects. * Experience in laboratories, healthcare/clinics, warehouses, technical facilities, server rooms, kitchens, or other specialist environments is highly desirable. * Strong technical knowledge of HVAC, Public Health/Plumbing, and Fire Protection systems. * Ability to independently prepare and verify mechanical engineering calculations and complete coordinated designs. * Strong understanding of UAE/GCC authority requirements and relevant standards, including ASHRAE, CIBSE, NFPA, SMACNA, UAE Fire & Life Safety Code, Civil Defence requirements, and applicable plumbing codes. * Strong working knowledge of Carrier HAP or equivalent, AutoCAD, Navisworks, Microsoft Excel, and relevant engineering calculation software. * Experience with BIM/Revit coordination is advantageous.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary <br></span><ul> <li>The Production Manager leads a dedicated team of operators and technicians to maximize flour heat-treatment throughput and plant efficiency while enforcing strict food safety and hygiene protocols. This role drives operational excellence by maintaining GMP compliance, ensuring audit-ready documentation, and directing preventive plant maintenance to minimize downtime. By personally mentoring staff and utilizing root-cause analysis to eliminate processing failures, the manager secures a highly skilled workforce and a continuous, defect-free production cycle.</li> </ul><br><br>Roles &amp; Responsibilities <br><ul> <li>Operate FHT production line and lead production KPIs. Ensure optimum and cost-effective operations of the plant or packing section.</li> <li>Mobilize HSE agenda in daily operations, regularly participate in safety walks, and take relevant safety actions. Ensure safety, HSE compliance, and implement internal controls for documented processes.</li> <li>Assist in scope-based and need-based packaging development through relevant trials and specs development in each category of the Agri Food business group.</li> <li>Adhere to production plans and schedules, focus on packaging constraints, and support line manager in managing operations scheduling.</li> <li>Execute efficiency management through OEE (Overall Equipment Efficiency), TPM (Total Productivity Management), and champion section 5S activities.</li> <li>Partner with BU HR for manning-related matters, monitor headcounts and relevant issues, lead operator's training, and ensure accurate training w.r.t JDs (Job Descriptions).</li> <li>Ensure best utilization of available assets with target OEE, operate at minimum HC levels, and support manufacturing manager on new projects and implementations.</li> <li>Implement and practice basics of TPM, including Kaizens, and ensure controls on all changes management.</li> <li>Record production and batch data in Oracle, ensure timely cycle counts, accuracy, material usage variances, CC (Cycle Count) coverage, and wastage control.</li> <li>Understand, reflect, and practice IFFCO’s vision and values.</li> </ul><br><br>KPIs <br><ul> <li>Material/equipment efficiency.</li> <li>Budgeted production volumes vs actual.</li> <li>In process cost of rejection/wastages</li> <li>FG inventory levels</li> <li>Compliance all Audits</li> </ul> <br><br>Work experience requirement <br><ul> <li>6-10 years of experience in managing FMCG production</li> </ul><br><br>Qualification <br><ul> <li>B.E. / B. Tech. Food Technology (Diary or Mechanical)</li> <li>Hands-on experience on Packaging machines and high-speed lines is an added advantage</li> <li>Certified TPM practitioner and have fair idea of end of line automations</li> </ul><br><br>Competencies <br>Production Planning<br>Safety Procedures and Norms<br>Quality Management<br>Cost Management<br>Industry Regulations and Norms<br>Communicating effectively<br>Self and Team Management<br>Planning &amp; Decision Making<br>Customer Centricity<br>Ownership &amp; Result Orientation<br><br><br><br> </div>