وظائف مهندس ميكانيكا معدات ثقيلة

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Conduct comprehensive inspections on heavy vehicles to diagnose mechanical issues and ensure optimal performance.</li><li>Perform preventive maintenance tasks, including oil changes and brake adjustments, to enhance vehicle longevity and safety.</li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>3-4 Years as Mechanic in Heavy commercial vehicles</li><li>Ability to perform Mechanical maintenance jobs</li><li>Ability to diagnose and resolve Mechanical</li><li>ITI/Diploma in Diesel</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Title:</strong> Heavy Driver (ADNOC Site)</p><p><strong>Job Summary:</strong></p><p>The Heavy Driver is responsible for the safe and efficient transportation of equipment, materials, and project-related cargo to and from ADNOC project sites while ensuring full compliance with ADNOC HSE requirements, UAE traffic regulations, and company policies. The role requires a strong commitment to safety, vehicle maintenance, and timely delivery of assigned tasks.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Operate heavy vehicles such as trucks, trailers, , and other heavy commercial vehicles safely and efficiently.</p></li><li><p>Transport project materials, equipment, tools, between company facilities, suppliers, and ADNOC sites.</p></li><li><p>Ensure compliance with ADNOC HSE standards, site regulations, and UAE traffic laws at all times.</p></li><li><p>Conduct daily pre-trip and post-trip vehicle inspections and report any defects or maintenance requirements immediately.</p></li><li><p>Maintain vehicle cleanliness and ensure all required documentation, permits, and registrations are valid and available.</p></li><li><p>Secure loads properly to prevent damage during transportation.</p></li><li><p>Coordinate with logistics, warehouse, project, and site teams to ensure timely deliveries and collections.</p></li><li><p>Keep accurate records of vehicle usage, mileage, fuel consumption,.</p></li><li><p>Report accidents, incidents, near misses, or traffic violations immediately to the supervisor.</p></li><li><p>Ensure compliance with company policies, defensive driving practices, and environmental requirements.</p></li></ul><p><strong>Qualifications:</strong></p><ul><li><p>Valid UAE Heavy Vehicle Driving License.</p></li><li><p>Minimum 3–5 years of experience driving heavy vehicles in the UAE.</p></li><li><p>Previous experience working on ADNOC or other oil &amp; gas projects is preferred.</p></li><li><p>Good knowledge of UAE roads, traffic regulations, and defensive driving techniques.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Required Skills:</strong></p><ul><li><p>Safe driving and defensive driving techniques.</p></li><li><p>Knowledge of ADNOC HSE requirements and site safety procedures.</p></li><li><p>Good time management and route planning skills.</p></li><li><p>Physically fit and capable of working in outdoor industrial environments.</p></li></ul><p><strong>Work Location:</strong></p><ul><li><p>ADNOC Onshore/ ADNOC &nbsp;Project Sites, UAE</p></li></ul><p></p></section>

<p><strong>Job Title:</strong> Mechanical Engineer (UAE National – Fresh Graduate)</p><p><strong>Location:</strong> Ajman, United Arab Emirates</p><p><strong>Employment Type:</strong> Full-time</p><p>About the Company</p><p>We are a leading European construction company with a strong presence in the UAE, delivering high-quality construction and infrastructure projects. We are committed to engineering excellence, innovation, and the development of local talent. As part of our Emiratization initiative, we are seeking a motivated UAE National graduate to join our engineering team in Ajman.</p><p>Job Summary</p><p>The Mechanical Engineer will support the planning, coordination, execution, and monitoring of mechanical engineering activities on construction projects. This entry-level role is ideal for a recent graduate looking to gain practical experience while working alongside experienced engineers on world-class projects.</p><p><strong>Desired Candidate Profile</strong></p><ul><li><p>UAE National (Family Book required).</p></li><li><p>Bachelor's degree in Mechanical Engineering from an accredited university.</p></li><li><p>Fresh graduate or up to one year of relevant internship or work experience.</p></li><li><p>Proficiency in Microsoft Office applications.</p></li><li><p>Basic knowledge of AutoCAD; familiarity with Revit or BIM software is an advantage.</p></li></ul>

<p><strong>Sales Engineer - Export</strong></p><p><br></p><p>Jubaili Bros is looking for a motivated <strong>Sales Engineer - Export</strong> to drive sales growth, build strong customer relationships, and expand our presence across export markets. The ideal candidate should have both technical understanding and commercial awareness to deliver effective sales solutions and achieve business targets.</p><br><p>Key Responsibilities :</p><ul><li><p>Analyze export markets and sales data to identify growth opportunities and support strategic business planning.</p></li><li><p>Conduct market visits and feasibility studies to identify new export opportunities.</p></li><li><p>Monitor export market trends, competitor activities, and identify new business opportunities to drive sales growth.</p></li><li><p>Develop new business opportunities and build strong relationships with customers and distributors across assigned export markets.</p></li><li><p>Visit international customers, understand their technical requirements, and recommend suitable products and solutions.</p></li><li><p>Prepare technical and commercial quotations, proposals, and bids.</p></li><li><p>Follow up on quotations, pricing, payments, and customer inquiries.</p></li><li><p>Coordinate with internal teams to ensure timely order execution and customer satisfaction.</p></li><li><p>Develop customer segmentation, upselling, and promotional strategies to maximize sales opportunities and business growth.</p></li><li><p>Represent the company at industry exhibitions and trade events to network, generate leads, and promote export business.</p></li><li><p>Maintain accurate sales records, reports, and CRM updates.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Electrical or Mechanical Engineering.</p></li><li><p>2-3 years of relevant sales experience, preferably in B2B or technical sales.</p></li><li><p>Exposure to industrial, electrical, mechanical, power generation, rental, projects, construction, HVAC, heavy machinery, or related industries.</p></li><li><p>Good commercial understanding of pricing, payment terms, customer follow-up, and market competition.</p></li><li><p>Comfortable discussing technical solutions; engineering knowledge is an advantage.</p></li><li><p>Strong communication, negotiation, and customer relationship skills.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Supervise and perform installation, maintenance, repair, testing, predictive / preventive / breakdown maintenance for Rotating and Static Equipment to ensure equipment availability, reliability and integrity.</p><br><br><br>Job Specific Accountabilities <br><p><strong>Maintenance Planning and execution</strong><br>•&nbsp;&nbsp; &nbsp;Ensure availability of required resources for mechanical maintenance execution and schedule expectations to complete the job safely and in time.<br>•&nbsp;&nbsp; &nbsp;Plan, schedule, execute and supervise rotating/static equipment Preventive/Predictive maintenance and troubleshooting to ensure reliability and availability.<br>•&nbsp;&nbsp; &nbsp;Inspect / follow up tasks progress and final completion, and provide report to ensure timely and quality job execution.<br>•&nbsp;&nbsp; &nbsp;Provide technical support, prepare scope of work, contracts, cost reporting and participate in negotiation for equipment repair to meet required standards and cost effectiveness. &nbsp;&nbsp;<br>•&nbsp;&nbsp; &nbsp;Update refurbished equipment database and history for the equipment and their accessories to ensure effective equipment keeping. &nbsp;<br>•&nbsp;&nbsp; &nbsp;Participate and conduct daily /weekly safety toolbox talks to discuss on safety and methods of completing job tasks.<br>•&nbsp;&nbsp; &nbsp;Supervise the testing and commissioning of new or modified equipment or systems, ensuring that repairs conform to correct methods and safety procedures.<br>•&nbsp;&nbsp; &nbsp;Participate in the planning, scheduling and execution of shutdown and major overhaul maintenance activities.<br><strong>Materials Control</strong><br>•&nbsp;&nbsp; &nbsp;Monitor availability of needed tools, equipment, and parts for scheduled jobs to ensure smooth operations.<br>•&nbsp;&nbsp; &nbsp;Prepare list of spares, tools and materials required for the maintenance jobs and issue the Purchase/Material requisitions. Inspect and confirm that the specifications are in line with the requirement of the received 'direct charge' and 'stock Materials'.<br>•&nbsp;&nbsp; &nbsp;Arrange the transportation of materials to site and coordinate with workshop supervisor on the use of heavy equipment, rigging services.<br>&nbsp;&nbsp;<br>&nbsp;</p><br><br><br>Minimum Qualification <br><p>Diploma in Mechanical Engineering or equivalent.</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>5 years of experience, in supervising Mechanical maintenance activities within a large industrial organization, preferably in the Oil and Gas industry</p><br><p>Revenues/ Budget: As per approved financial budget<br>Direct Reports: As per organization chart<br>Indirect Reports: As per organization chart</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Diagnose and repair complex electrical and mechanical issues in heavy vehicles, utilizing advanced diagnostic tools and schematics.</li><li>Perform routine maintenance and inspections on engines, transmissions, braking systems, and hydraulic components to ensure optimal performance and safety.</li><li>Troubleshoot and repair advanced electronic control units (ECUs), sensors, and wiring harnesses specific to heavy vehicle systems.</li><li>Conduct preventative maintenance schedules, including fluid changes, filter replacements, and lubrication, to extend vehicle lifespan.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>4-5 yrs in heavy commercial vehicle. </p></li><li><p>Ability to use diagnostic tool and solve complex electrical and electronic issues </p></li><li><p>Ability to perform Mechanical &amp; electrical jobs</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Overview Of The Role:</b></p><p><br></p><ul><li>The Sales Engineer is responsible for promoting, marketing, and selling Volvo construction equipment products within the designated territory of Dubai and the North Emirates. The role requires managing the complete sales process, ensuring customer satisfaction, and achieving budgeted targets. The Sales Engineer must build strong client relationships, secure new business, and stay informed about industry developments. Success in this role is defined by the ability to meet sales targets, engage customers effectively, and expand the client base.</li></ul><p><br></p><p><b>What You Will Do:</b></p><p><br></p><p>Sales Management</p><p><br></p><ul><li>Contribute to the achievement of revenue, unit sales, and customer engagement through effective sales process management.</li><li>Seek out and target new customers and sales opportunities, initiating action plans to secure new business.</li><li>Manage customer requirements for on-time delivery, considering lead-times and product specification changes.</li><li>Provide timely quotations to clients and ensure order delivery with minimal receivable levels.</li></ul><p><br></p><p>Relationship Building</p><p><br></p><ul><li>Develop and maintain strong working relationships with key contacts to drive repeat and improved business levels.</li><li>Cultivate new clients to the Famco client database while retaining current client base and growing existing relationships.</li></ul><p><br></p><p>Industry Knowledge and Compliance</p><p><br></p><ul><li>Remain abreast of the latest regulations, industry standards, and good working practices.</li><li>Ensure compliance with Famco systems and show a knowledgeable understanding with reports and clients alike.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills To Be Successful:</b></p><p><br></p><ul><li>Sales process management with a focus on achieving revenue and growth targets.</li><li>Strong client relationship management and networking capabilities.</li><li>In-depth knowledge of power products and construction equipment industry standards.</li><li>Proactive and self-motivated approach to achieving sales goals.</li></ul><p><br></p><p><b>What Qualifies You For The Role:</b></p><p><br></p><ul><li>Diploma or degree in Mechanical/Electrical Engineering.</li><li>Minimum 5 years of experience in a similar sales role within the UAE.</li><li>Experience with distributor and dealer sales, with a focus on customer engagement and territory management.</li><li>Proficiency in English is essential, with strong communication and interpersonal skills.</li></ul><p><br></p></div>

Job Description<br><br>Senior Mechanical Engineer (Buildings & Infrastructure) <br><br>With over 14,000 professionals globally, GHD is a leading multidisciplinary professional services company delivering engineering, design, and advisory solutions across water, energy, resources, environment, property & buildings, and transportation sectors.<br><br>As part of our continued growth in the Middle East, we are expanding our Engineering team to support a strong pipeline of multidisciplinary projects. We are seeking a highly experienced Senior Mechanical Engineer to lead the design and delivery of complex mechanical systems across buildings, infrastructure, and industrial developments.<br><br>This is a leadership role combining technical excellence, project delivery, and client engagement.<br><br>Key Responsibilities<br><br>Lead the design and delivery of mechanical engineering systems across all project stages (concept, detailed design, construction, and commissioning). Ensure compliance with relevant regulations and international standards (e.g., ASHRAE, IPC, NFPA, CIBSE, and relevant authority requirements). Drive design quality through technical reviews, calculations, simulations, value engineering, design optimization, and multidisciplinary coordination. Utilize advanced modelling and digital tools (Revit, BIM workflows, energy modelling platforms). Provide technical leadership, mentoring, and guidance to junior and mid-level engineers. Coordinate with architects, structural, electrical, and specialist teams to ensure integrated design delivery. Conduct site inspections, audits, and performance assessments to ensure alignment with design intent. Lead mechanical design reviews, identify technical risks and design gaps, and implement practical engineering solutions in line with project requirements and commercial objectives. Support project managers in tracking progress, managing risks, and maintaining delivery timelines. Engage directly with clients—presenting solutions, resolving challenges, and building long-term relationships. Contribute to innovation initiatives, sustainability strategies, and digital engineering improvements.<br><br>Required Qualifications & Experience<br><br>Bachelor’s or master’s degree in mechanical engineering. Minimum 8–12 years’ experience in mechanical engineering, specifically within building services in the UAE. Proven experience delivering complex projects with minimal supervision. Strong expertise in:HVAC design and energy-efficient systems Mechanical plant design and equipment selection Piping systems and system integration Proficiency in industry-standard tools:Auto CAD, Revit (BIM), IES, HAP, and mechanical calculation software Strong knowledge of:UAE authority regulations and approval processes International codes (ASHRAE, IPC, NFPA where applicable) Experience in preparing:Technical reports and specifications Feasibility studies Familiarity with Building Management Systems (BMS) and smart building integration. Strong commercial awareness and understanding of project delivery frameworks in the UAE.<br><br>Preferred Attributes<br><br>Chartered Engineer status or working toward professional accreditation. Experience on large-scale or high-profile developments in the UAE or GCC. Exposure to sustainability frameworks (LEED, Estidama, Net Zero strategies). Experience working in multidisciplinary consultancy environments.<br><br>Why Join Us?<br><br>Collaborate in a multi-disciplinary, innovative environment where your input shapes both standardised and bespoke solutions. Join a team that values knowledge-sharing, mentorship, and professional excellence. Be part of a workplace that combines collaboration, flexibility, and connection. Join us in the office three days per week to contribute, connect and excel in our vibrant environment.

Company Description Infinity Fitness Club is a premier gym in Ajman dedicated to helping people improve their health and well-being. The club offers a variety of exercise programs and fitness regimes, supported by knowledgeable and competent instructors. Members can access world-class facilities to train in strength, cardio, and functional fitness. Infinity Fitness Club also provides opportunities to learn and advance in swimming and gymnastics in a professional environment.<br>Role Description The Equipment Sales Specialist is a full-time, on-site role based in the United Arab Emirates. This position is responsible for promoting and selling fitness and heavy equipment to new and existing clients, including gym members and external customers. Day-to-day tasks include identifying customer needs, presenting equipment features and benefits, preparing quotations, and closing sales. The role also involves maintaining product displays, coordinating with suppliers, tracking inventory, and supporting sales campaigns. The Equipment Sales Specialist will collaborate closely with the fitness and operations teams to ensure clients receive appropriate equipment recommendations and excellent service.<br>Qualifications<br> Sales skills, including Sales and Sales Management, to drive revenue and manage the sales process effectively. Customer Service and Negotiation skills to build relationships, handle inquiries, and secure favorable agreements. Knowledge of Heavy Equipment and fitness equipment to provide accurate product information and recommendations. Strong communication and interpersonal skills to interact confidently with clients and team members. Basic understanding of inventory management and pricing strategies. Previous experience in fitness, sports, or equipment sales is an advantage. Ability to work on-site in the United Arab Emirates and adapt to a fast-paced, customer-focused environment.

<ul><li><p>To perform a wide range of duties relating to the mechanical installation, repair and maintenance of machinery, equipment and fixtures to ensure their efficient operation at minimum downtime complying with EHS Guidelines with a focus on continuous improvement. KEY ACCOUNTABILITIES: Tackles all mechanical equipment breakdowns and planned/preventive/predictive maintenance work with minimum direction and supervision within the given time constraint minimizing production downtime.Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete the work.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.Monitors any repeated breakdown and recommends/completes proper modification to resolve the problem.Identifies and reports any abnormalities. Initiates repairs/replacements/tests/ assembles worn out or failed components/parts. Reports to supervisor and takes necessary action to overhaul/replace parts, leaving the working area clean.Performs various works related to welding and fabrication.Mentors newly joined mechanics in order to equip them with the plant & equipment knowledge necessary to carry out maintenance work.Continuously works towards improving EHS and Plant & Equipment Performance by participating in all BE activities like Suggestion Scheme, 5S, Hazard Reporting, TAMAHAL/PEER, etc.Assists other departments in the repair and troubleshooting of equipment.Inputs data into maintenance management systems for works and manning records.Fulfil day / shift duties with a team of Technicians / Craftsmen / Contractors as assigned by Supervisor.Performs all the PM’S, running inspections & checklists on daily basis issued as per maintenance planning requirements.Perform other related duties as communicated by supervisor/technician.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum Qualifications: Diploma in relevant fieldCompletion of PEC Craft Training Minimum Experience: 3 Years’ of relevant experience in a heavy industry after DiplomaNo experience required after completion of PEC TrainingSkills:Good working knowledge of written and spoken EnglishMust be familiar with all maintenance tools with good computer skillsExposure to installation & troubleshootingMust be able to read and understand engineering drawings/manuals/instructions</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D. equivalent and vocational or technical background.<br>Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting.<br>At least 2 years of hotel engineering/maintenance experience.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>License or Certification: Valid Driver’s License<br>REQUIRED QUALIFICATIONS<br>Universal Chlorofluorocarbon (CFC) Certification<br>Must meet applicable state and federal certification and/or licensing<br>requirements.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>The world is a big place and Marriott Executive Apartments offers temporary housing that feels like home in the biggest and best cities for business travel across Europe, Asia, Latin America, Africa and the Middle East. Join the Marriott Executive Apartments team and help our guests adapt to a new locale and feel comfortable and cared for while living away from home. In joining Marriott Executive Apartments, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Plan and supervise the maintenance activities of a wide range of instrument and control systems in the plant and coordinate these activities with operations and other maintenance teams to ensure reliable functioning of the instrument and control systems.</p><br><br><br>Job Specific Accountabilities <br><p><strong>Maintenance Planning, Execution and expertise</strong><br>•&nbsp;&nbsp; &nbsp;Provide support to the operations and maintenance teams for equipment testing, troubleshooting, routine equipment surveillance and start-up activities. Liaise with Mechanical and Electrical sections and establish a seamless integration between operation and maintenance teams to ensure compliance to the planned maintenance activities.<br>•&nbsp;&nbsp; &nbsp;Provide technical support in the field for the execution of critical maintenance activities of the equipments to ensure that the problems are resolved with minimum down time.<br>•&nbsp;&nbsp; &nbsp;Evaluate, allocate and arrange the manpower requirements for daily preventive, break down and shutdown maintenance plans.<br>•&nbsp;&nbsp; &nbsp;Assess the workload, backlog and the work plan and coordinate with relevant sections to complete the work plan. Monitor and arrange the resources for the effective compliance to the agreed work plan.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Monitor and control required material, spares, consumables and tools in high quality and quantities to ensure continuous availability.<br>•&nbsp;&nbsp; &nbsp;Conduct and implement root cause analysis of equipment failures and non-scheduled shutdowns and recommend problem resolutions to increase the reliability and availability of equipment<br>•&nbsp;&nbsp; &nbsp;Provide input to prepare and track the forthcoming major maintenance, upgrades and obsolescence issues to integrate with the division’s 5 years’ rolling business plans<br>•&nbsp;&nbsp; &nbsp;Provide technical support for development, implementation and commissioning of new projects in the mechanical design and specifications to optimize costs and ensure compliance with applicable standards and best practices.<br>•&nbsp;&nbsp; &nbsp;Participate in defining the technical requirements, technical bid evaluation and inspection of materials on receipt to ensure specifications and required quality. Monitor the performance of Contractors for the assigned works to ensure quality and standards.<br>&nbsp;</p><br><br><br>Minimum Qualification <br><p>Bachelor Degree in Instrumentation and Control or Electronics discipline or equivalent Professional Qualification</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>6 years of experience in Instrument and Control engineering and maintenance within a large industrial organization, preferably in the Oil and Gas industry</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br><br><br> </div>

<ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical & sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>QUALIFICATIONS & SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation & dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>General Building Lead / Superintendent<br> Mechanical Equipment installation&nbsp;</p><br><br> </div>

OB SUMMARY:The Planning Engineer (MEP/ELV) is responsible for developing, monitoring, and controlling project schedules for Mechanical, Electrical, Plumbing, and ELV works. The role ensures timely execution of MEP activities in coordination with site, design, procurement, and subcontractor teams, using Primavera P6/MS Project. KEY RESPONSIBILITIES:Prepare detailed MEP/ELV project schedules, baseline programs, WBS, and manpower histograms. Track progress of HVAC, electrical, plumbing, and ELV works against baseline schedule. Update schedules regularly and analyze delays, critical path impact, and recovery plans. Coordinate with project managers, MEP engineers, subcontractors, and procurement teams. Prepare weekly/monthly progress reports, S-curves, dashboards, and KPIs. Support delay analysis, EOT claims, and Time Impact Analysis. Develop look-ahead schedules and monitor procurement and installation timelines. Ensure alignment of subcontractor schedules with overall project program. REQUIREMENTS:Engineering degree (Mechanical / Electrical / Civil) Experience in MEP / ELV projects in construction industry Strong knowledge of Primavera P6 and/or MS Project Understanding of HVAC, Electrical, Plumbing, and ELV systems Good coordination, analytical, and reporting skills

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job SENIOR MECHANICAL ENGINEER <p>We are seeking an experienced Mechanical Engineer with 15+ years of experience in Oil &amp; Gas / EPC projects to support an ADNOC Onshore project. The candidate will be responsible for supervising and coordinating mechanical activities at site, with strong experience in construction, installation, testing, pre-commissioning and commissioning. The ideal candidate must be ADNOC Approved and have hands-on experience in major onshore Oil &amp; Gas projects.</p><br> <p><strong>JOB RESPONSIBILITIES:</strong></p><br> <ul> <li>Supervise and coordinate mechanical construction and installation activities at site.</li> <li>Review and interpret mechanical drawings, specifications, method statements and project requirements.</li> <li>Coordinate with engineering, construction, commissioning, QA/QC and subcontractor teams.</li> <li>Monitor installation and construction activities for mechanical equipment and systems.</li> <li>Coordinate mechanical works including static equipment, rotating equipment, packages, tanks, pressure vessels, pumps, compressors and associated systems, as applicable to the project.</li> <li>Ensure mechanical activities are executed in accordance with approved drawings, specifications, project procedures and ADNOC standards.</li> <li>Coordinate with other disciplines to resolve site technical and construction issues.</li> <li>Monitor subcontractor activities, productivity, progress and quality.</li> <li>Participate in inspections, testing, pre-commissioning, commissioning and system handover activities.</li> <li>Support equipment installation, alignment, preservation and mechanical completion activities.</li> <li>Review RFIs, technical queries, site instructions and engineering changes.</li> <li>Coordinate with QA/QC for inspection, testing and documentation requirements.</li> <li>Participate in site walkdowns, punch-list preparation and clearance.</li> <li>Support mechanical completion, commissioning and handover activities.</li> <li>Ensure compliance with project HSE requirements and safe working practices.</li> <li>Provide technical support to the construction and commissioning teams throughout the project.</li> </ul> <p><strong>JOB RESPONSIBILITIES:</strong></p><br> <ul> <li>Bachelor's Degree in Mechanical Engineering or equivalent.</li> <li>15+ years of relevant experience in Oil &amp; Gas / Petrochemical / Industrial projects.</li> <li>ADNOC Approval is mandatory.</li> <li>Strong experience in ADNOC Onshore projects is required.</li> <li>Proven experience in site-based mechanical construction and commissioning.</li> <li>Strong exposure to mechanical equipment installation and construction activities.</li> <li>Experience with relevant mechanical disciplines, including static equipment, rotating equipment, packages, tanks, vessels, pumps, compressors and associated mechanical systems, depending on project scope.</li> <li>Strong knowledge of mechanical construction methodologies, inspection requirements and QA/QC procedures.</li> <li>Experience coordinating with EPC contractors, subcontractors, consultants and client teams.</li> <li>Ability to read and interpret mechanical drawings, equipment specifications, datasheets and construction documents.</li> <li>Experience with mechanical completion, pre-commissioning, commissioning, punch-list clearance and handover.</li> <li>Strong knowledge of Oil &amp; Gas site safety requirements and permit-to-work procedures.</li> <li>Willingness to work site-based in the UAE.</li> </ul><p>VERTICAL</p><br><p>ENGINEERING</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Job Title: Sr. Construction/Installation Engineer - (Structure - Topsides &amp; Bridges)<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;<span>Job Title: Sr. Construction/Installation Engineer - (Structure - Topsides &amp; Bridges)</span></u></b></p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high‑profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Contractors Office/ Fabrication Yard Office in Abu Dhabi for some time and then will later move to Offshore Site on 6 weeks on/ 3 weeks off rotation.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The <b>Senior Construction/Installation Engineer - Structures (Topsides &amp; Bridges)</b> is responsible for planning, coordinating, and overseeing the construction, load-out, transportation, offshore installation, hook-up, and commissioning support activities for Offshore Topsides, Interconnecting Bridges, and associated structural facilities.</p><br><br><p>The role ensures that all offshore construction and installation activities are executed safely, efficiently, and in compliance with project specifications, approved procedures, client requirements, and industry standards. The incumbent will provide technical leadership, interface management, and construction engineering support throughout all phases of project execution.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Construction &amp; Installation Engineering</b></p><br><br><ul><li>Lead construction and offshore installation engineering activities related to topsides, bridges, modules, and associated offshore structures.</li><li>Review and approve installation methodologies, lifting plans, rigging studies, transportation analyses, and offshore execution procedures.</li><li>Ensure constructability considerations are incorporated during engineering and fabrication phases.</li><li>Develop installation work packs, method statements, and execution plans.</li><li>Coordinate with engineering, fabrication, marine, and commissioning teams to support project objectives.</li><li>Monitor offshore installation progress and provide technical guidance to site teams.</li></ul><p><b>Offshore Structures Installation</b></p><br><br><p>Manage and support installation activities for:</p><br><br><ul><li>Offshore Topsides</li><li>Production Decks</li><li>Utility Decks</li><li>Wellhead Decks</li><li>Interconnecting Bridges</li><li>Bridge Support Structures</li><li>Flare Bridges and Flare Structures</li><li>Deck Extensions</li><li>Living Quarters Modules</li><li>Equipment Modules and Skids</li><li>Brownfield Modification Structures</li><li>Secondary Steel and Structural Appurtenances</li></ul><p><b>Load-Out &amp; Marine Transportation</b></p><br><br><ul><li>Coordinate topside and bridge load-out activities from fabrication yards.</li><li>Review sea-fastening designs and transportation studies.</li><li>Support transportation readiness reviews and marine assurance activities.</li><li>Coordinate with barge contractors, vessel operators, and marine warranty surveyors.</li><li>Ensure transportation activities are executed safely and according to approved procedures.</li></ul><p><b>Offshore Installation &amp; Hook-Up</b></p><br><br><ul><li>Support offshore heavy lift operations involving topsides and bridge structures.</li><li>Coordinate crane vessel activities and installation sequences.</li><li>Monitor lifting, positioning, alignment, and structural connections.</li><li>Support bridge integration, mechanical completion, and structural tie-ins.</li><li>Coordinate hook-up and interface works with commissioning teams.</li><li>Resolve offshore construction challenges and engineering queries.</li></ul><p><b>Engineering Review &amp; Technical Support</b></p><br><br><ul><li>Review construction drawings, fabrication deliverables, lift studies, and installation analyses.</li><li>Participate in constructability reviews, HAZID, HAZOP, and SIMOPS workshops.</li><li>Review and manage technical queries (TQs), field engineering changes, and installation deviations.</li><li>Provide technical recommendations to project management and offshore execution teams.</li><li>Ensure engineering deliverables support safe and efficient offshore installation.</li></ul><p><b>HSE Responsibilities</b></p><br><br><ul><li>Ensure strict compliance with project HSE requirements and offshore safety regulations.</li><li>Participate in risk assessments, toolbox talks, and pre-job safety meetings.</li><li>Ensure all offshore activities are conducted under approved Permit-to-Work systems.</li><li>Support incident investigations and implementation of corrective actions.</li><li>Promote a strong safety culture across all construction and installation activities.</li></ul><p><b>Stakeholder Coordination</b></p><br><br><ul><li>Interface with Engineering, Fabrication, Marine Operations, Hook-Up, Commissioning, Quality, and Project Controls teams.</li><li>Coordinate with installation contractors, heavy lift vessel operators, and subcontractors.</li><li>Participate in client meetings, readiness reviews, and project progress meetings.</li><li>Ensure effective communication between offshore and onshore project teams.</li></ul><p><b>Quality Assurance &amp; Compliance</b></p><br><br><ul><li>Verify compliance with approved procedures, quality plans, and project specifications.</li><li>Support inspection and testing activities during offshore installation.</li><li>Review and approve as-built records and installation documentation.</li><li>Assist in punch list management and project handover activities.</li><li>Participate in internal and external audits as required.</li></ul><br><p><b>Qualifications</b></p><br><br><p><b>Education</b></p><br><br><ul><li>Bachelor's Degree in Mechanical Engineering, Structural Engineering, Civil Engineering, Marine Engineering, or a related discipline.</li><li>Master's Degree is an advantage.</li></ul><p><b>Professional Certifications (Preferred)</b></p><br><br><ul><li>PMP Certification</li><li>BOSIET/HUET</li><li>Offshore Safety Certifications</li><li>Lifting and Rigging Certification</li><li>NEBOSH or equivalent HSE qualification</li></ul><br><p><b>Experience</b></p><br><br><ul><li>Minimum <b>15-18 years</b> of experience in offshore construction and installation within EPC/EPCI oil &amp; gas projects.</li><li>Minimum <b>5 years</b> in a senior construction, offshore installation, or execution engineering role.</li><li>Proven experience in the installation of:<ul><li>Offshore Topsides</li><li>Production Platforms</li><li>Interconnecting Bridges</li><li>Utility Modules</li><li>Living Quarters</li><li>Flare Structures</li><li>Brownfield Offshore Modifications</li></ul></li><li>Experience with heavy lift vessels, marine transportation, and offshore hook-up activities.</li><li>Previous experience in Middle East offshore projects (ADNOC, Saudi Aramco, QatarEnergy, etc.) is preferred.</li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Description:</strong></p><br><p>We are seeking a Mechanical/Aerospace Engineer to support a one-year university CubeSat mission. The role covers thermal analysis, CAD modeling and drawings, structural analysis, and Assembly, Integration, and Testing (AIT) of the satellite, in collaboration with subsystem teams and students. The engineer will ensure the spacecraft structure and mechanical interfaces are robust, manufacturable, documented, and ready for environmental testing and flight. </p><br><p><strong>Minimum Qualifications:</strong></p><br><p>• Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or related field. • Strong proficiency in 3D CAD modeling and engineering drawings. • Experience performing thermal and structural/finite-element analysis for aerospace or precision mechanical systems. • Knowledge of materials, fasteners, tolerances, manufacturing processes, and design for assembly. • Comfortable working in a lab or cleanroom and supporting hands-on satellite assembly, integration, and test. </p><br><p><strong>Preferred Qualifications:</strong></p><br><p>• CubeSat/spacecraft mechanical design or AIT experience (university or industry). • Experience with thermal and structural analysis tools (e.g., ANSYS, NASTRAN, or equivalent). • Familiarity with vibration, thermal-vacuum, and other spacecraft environmental tests. • Experience preparing CAD models, drawings, interface documents, test procedures, and reports. • Mentoring experience with student teams or junior engineers. </p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Mechanical Engineer (Static &amp; Rotating) <p>on-site position</p><br> <p>Position: Mechanical Engineer (Static &amp; Rotating)</p><br> <p>Company Overview:</p><br> <p>Star Services LLC is a leading provider of engineering, technical, and professional services to clients in the oil and gas industry. We specialize in delivering innovative solutions to complex challenges, helping our clients optimize their operations and increase efficiency. Our team is made up of highly skilled and experienced professionals who are committed to delivering exceptional results for our clients.</p><br> <p>Job Description:</p><br> <p>We are currently seeking a highly motivated and skilled Mechanical Engineer (Static &amp; Rotating) to join our team. In this role, you will be responsible for providing technical support and expertise in the design, installation, and maintenance of mechanical equipment and systems. You will work closely with our clients to understand their needs and develop solutions that meet their requirements.</p><br> <p>Key Responsibilities:</p><br> <p>- Design and develop mechanical systems and equipment for various projects, including static and rotating equipment</p><br> <p>- Conduct feasibility studies, risk assessments, and cost-benefit analyses for new projects</p><br> <p>- Prepare technical specifications, drawings, and other documentation for equipment and systems</p><br> <p>- Ensure compliance with industry codes, standards, and regulations in all designs and installations</p><br> <p>- Collaborate with project teams to ensure timely and efficient delivery of projects</p><br> <p>- Conduct inspections and troubleshoot issues with existing equipment and systems</p><br> <p>- Provide technical support to clients and address any concerns or issues that arise during project execution</p><br> <p>- Stay up-to-date with advancements in mechanical engineering and incorporate new technologies into designs and processes</p><br> <p>- Mentor and train junior engineers and technicians as needed</p><br> <p>Requirements:</p><br> <p>- Bachelor's degree in Mechanical Engineering or a related field</p><br> <p>- Minimum of 5 years of experience in mechanical engineering, with a focus on static and rotating equipment</p><br> <p>- Strong knowledge of industry codes and standards, such as ASME, API, and ANSI</p><br> <p>- Proficiency in CAD software and other engineering design tools</p><br> <p>- Excellent problem-solving and analytical skills</p><br> <p>- Ability to work independently and in a team environment</p><br> <p>- Strong communication and interpersonal skills</p><br> <p>- Willingness to travel and work on-site as needed</p><br> <br> <br> </div>