وظائف مشرف صيانة في الإمارات

<p>Key Responsibilities:</p><p>Duties:</p><ul><li><p>Liaise with the Service & Maintenance Supervisor.</p></li><li><p>Ensure TWMA equipment is Maintained in line with procedures.</p></li><li><p>Fabrication and assembly to be completed in line with issued drawings.</p></li><li><p>Repairs to be completed in line with equipment being maintained.</p></li><li><p>Ensure welding is undertaken in line with recognised standards.</p></li><li><p>Mark up drawings as required where changes are identified.</p></li><li><p>Log information on job Cards in line with Job card Procedure.</p></li><li><p>Attend daily service center or site briefings.</p></li><li><p>Ensure work areas are kept clean and safe.</p></li></ul><p>HSEQ – ensure maintenance requirements are fully understood by:</p><ul><li><p>Following all TWMA and HSE procedures.</p></li><li><p>Addressing any concerns and taking appropriate actions in conjunction with TWMA procedures.</p></li><li><p>Attending monthly safety meetings with HSEQ personnel.</p></li></ul><p>Out of Hours Maintenance/Process Support Assistance:</p><ul><li><p>Provide back-up assistance to other TWMA personnel by mobile phone as required.</p></li><li><p>Offshore/Oversees Process Support – supporting offshore operations.</p></li><li><p>Travelling offshore to check, service & repair equipment as required.</p></li><li><p>Be prepared to undertake medicals, vaccinations and training as required for offshore travel.</p></li></ul><p>Offshore/Oversees Process Support – supporting offshore operations:</p><ul><li><p>Travelling offshore to check, service & repair equipment as required.</p></li><li><p>Be prepared to undertake medicals, vaccinations and training as required for offshore travel.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Qualifications / Training (E – Essential / P – Preferred):</p><ul><li><p>National Vocational Qualification (NVQ) in related field, or secondary qualification with equivalent</p></li></ul><p>trade experience of at least 3 years if relevant qualification is not available (E).</p><ul><li><p>6G Welding Coding or Certificate (E)</p></li><li><p>SMAW Welding (E)</p></li><li><p>GTAW Welding (P)</p></li><li><p>MIG Welding (P)</p></li><li><p>3G Coding (P)</p></li></ul><p>TWMA.</p><p>The world’s drilling waste specialist. Last Reviewed: 04/09/2024 WELDER/FABRICATOR</p><ul><li><p>Basic Offshore Survival Induction & Emergency Training (BOSIET) (P) or ability to obtain certification</p></li></ul><p>if required to travel offshore.</p><p>Experience(s) (E – Essential / P – Preferred):</p><ul><li><p>Minimum 5 years work experience in a similar role within relevant field (E)</p></li><li><p>Working experience within the oil & gas or energy industries (P)</p></li><li><p>Fabricating various types of materials (E)</p></li><li><p>Welding to known pre-determined standards (E)</p></li><li><p>Working with Plasma, Oxy-Acetylene, Bandsaws and Grinders (E)</p></li><li><p>Experience in welding heavy plant machinery/materials (P)</p></li><li><p>Experience in Welding and Fabricating to DNV standards (P)</p></li></ul><p>Knowledge / Skills / Competencies (E – Essential / P – Preferred):</p><ul><li><p>Good interpersonal and communication skills in English (Written and Verbal) (E)</p></li><li><p>Basic knowledge in MS office tools especially MS word and MS Excel (E)</p></li><li><p>Ability to work to a high standard at all times (E)</p></li><li><p>Ability to follow Operations and Maintenance Instructions (E)</p></li><li><p>Adaptable, flexible, and positive attitude towards change (E)</p></li><li><p>Good team player with the ability to work on own initiative (E)</p></li><li><p>Ability to work well with diverse culture and staff at all levels (E)</p></li><li><p>Keen attention to detail and ability to present information effectively in a precise and appropriate</p></li></ul><p>format. (E)</p><ul><li><p>Dedicated to promoting a positive image of the company (E)</p></li><li><p>Physical ability to execute daily manual activities with optimal performance for prolonged working</p></li></ul><p>hours (E)</p><ul><li><p>Competent in applying defined systems of work (P)</p></li></ul><p>Complying with Procedures:</p><ul><li><p>Ensure compliance with the Company and Client operating policies and procedures.</p></li><li><p>Ensure compliance with the Company Health and Safety policy.</p></li><li><p>Be aware of company conditions of employment as detailed in the Employee Handbook.</p></li><li><p>Liaise with the HR Department to assure compliance with current employment law legislation and</p></li></ul><p>contract of employment.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <p><u><span>JOB PURPOSE</span></u><u><span>:</span></u></p><br><p><span>Responsible for all mechanical related jobs for Wireline/Slickline Units, Trucks, Cranes and all Light Vehicles.</span></p><br><p><u><span>KEY ACCOUNTABILITIES:</span></u></p><br><p><strong><u><span>Job Specific Accountabilities</span></u></strong></p><br><ul><li><span>Completely responsible for all Mechanical works and Maintenance of all Wireline/Slickline Units, Trucks and Crane in Workshop or on the field. </span></li><li><span>Carry out Monthly Maintenance of trucks, cranes and units.</span></li><li><span>Apply and fill required checklists - Daily, Monthly and Yearly as per required.</span></li><li><span>Pre-Job-check, After Job check for all Wireline Units, Trucks and Light Vehicles.</span></li><li><span>Go to Location and Rig whenever called and make the required repair for all units/ trucks /cranes /vehicles. </span></li><li><span>Daily reporting to Base/Field Supervisor in case of shortage of tools, parts or any deficiencies regarding equipment and safety issues.</span></li><li><span>Ensure that all Operations measurements and computations are carried out according to company procedures and standards.</span></li><li><span>Preview Stocks Items required for Mechanical Spare Parts and to make order as per requirement due in advance.</span></li><li><span>Responsible Follow up with suppliers the Orders, Changes and up gradation for all units.</span></li><li><span>Make sure the entire Heavy and Light Vehicles are always maintained in well condition with proper service timely.</span></li><li><span>Check all the Vehicle Checklists that properly filled by the Drivers daily.</span></li><li><span>Supply comments and suggestions to improve work quality for mechanical issues.</span></li><li><span>Training field crew on proper operating mechanical equipment and performing routine checks/servicing for mechanical units.</span></li><li><span>Comply with all UAE, ADNOC, ADNOC Drilling and client Asset Integrity Management codes of practice.</span></li><li><span>Performs other similar or related duties as assigned by Supervisor.</span></li></ul><p><strong><u><span>Generic Accountabilities</span></u></strong></p><br><p><strong><u><span>Policies, Systems, Processes &amp; Procedures</span></u></strong></p><br><ul><li><span>Implement and comply with all relevant functional policies, processes, systems, standards, procedures, to accomplish operational objectives.</span></li></ul><p><strong><u><span>Training</span></u></strong></p><br><ul><li><span>Provide on-the-job Training to meet Competency Based Training programs for UAE Nationalization.</span></li></ul><p><strong><u><span>Tool Box</span></u></strong></p><br><ul><li><span>Maintain all tools, safety gear and equipment provided by company safely and in working condition.</span></li><li><span>Arrange for repair or replacement of any tools and safety gear that may not be in good working condition.</span></li></ul><p><strong><u><span>Time Management</span></u></strong></p><br><ul><li><span>Carry out all maintenance jobs in line with assigned time standards.</span></li><li><span>Inform the Maintenance Supervisor in case additional resources are required to carry out the job within the assigned time frame.</span></li></ul><p><strong><u><span>Innovation and Continuous Improvement</span></u></strong></p><br><ul><li><span>Contribute to the identification of areas and opportunities for continuous improvement in the operating procedures, modification of functional processes, machinery or equipment.</span></li></ul><p><strong><u><span>Health, Safety, Environment (HSE) and Sustainability </span></u></strong></p><br><ul><li><span>Support the institution of an HSE culture and ensure compliance with relevant HSE policies, procedures &amp; controls and applicable legislation and sustainability guidelines across the Division in line with international standards, best practices and Corporate Code of Practices and to ensure integrity and safety of assets.</span></li></ul><p><strong><u><span>Housekeeping</span></u></strong></p><br><ul><li><span>Maintain the work environment clean and tidy before, during and after executing the job, in line with established standards of Hygiene and Housekeeping.</span></li></ul><p><strong><u><span>Reports</span></u></strong></p><br><ul><li><span>Collect technical data from the field as required and provide inputs to prepare Section progress reports for Company Management.</span></li><li><span>Provide input for the preparation of Method statements and initiate Near Miss reports.</span></li></ul><p><u><span>COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</span></u></p><br><p><strong><span>Internal</span></strong></p><br><ul><li><span>Regular contacts with base supervisor and all drivers.</span></li><li><span>Contact with BAO or Mussafah workshop in case of support.</span></li></ul><p><strong><span>External</span></strong></p><br><ul><li><span>None.</span></li></ul><strong><u><span>QUALIFICATIONS, EXPERIENCE, KNOWLEDGE &amp; SKILLS:&nbsp;</span></u></strong><p><strong><span>Minimum Qualification</span></strong></p><br><ul><li><span>Diploma in technical field.</span></li></ul><p><strong><span>Minimum Experience &amp; Knowledge &amp; Skills</span></strong></p><br><ul><li><span>3 years’ experience in slickline units, light and heavy vehicles.</span></li><li><span>Familiar with maintenance procedures.</span></li><li><span>Fully conversant with repairing and solving different vehicles defects.</span></li><li><span>Fully conversant with company standards and operational procedures.</span></li><li><span>Basic knowledge of spoken and written English.</span></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Carry out the installation, maintenance and repair of various types of rotating equipment and machinery.</p><br><br><br>Job Specific Accountabilities (Part 1) <br><p><strong>Maintenance</strong><br>•&nbsp;&nbsp; &nbsp;Carry out routine, preventive and predictive maintenance checks and tests on machinery and equipment according to schedules and check lists to ensure that the equipment are operating smoothly and as per requirement. &nbsp; &nbsp;<br>•&nbsp;&nbsp; &nbsp;Carry out a wide range of corrective maintenance by dismantling, assembling, replacing components in order to repair defective equipment.<br>•&nbsp;&nbsp; &nbsp;Carry out necessary tests and performance monitoring upon start-up, ensuring to report where readings are outside tolerable limits.<br>•&nbsp;&nbsp; &nbsp;Carry out new installations and modifications to systems, equipment and machinery, and assist during the start-up and shutdown of critical equipment and systems.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Participate in annual shutdown or major equipment turnarounds in the Plant.<br>•&nbsp;&nbsp; &nbsp;Coordinate where major equipment or sub-assembles have to be removed to the workshop for major repairs or overhaul and carries out repair or replacement before reassembling.</p><br><br><br>Job Specific Accountabilities (Part 2) <br><br>Job Specific Accountabilities (Part 3) <br><br>Generic Accountabilities <br><p><strong>Policies, Systems, Processes &amp; Procedures</strong><br>•&nbsp;&nbsp; &nbsp;Implement and comply with all relevant functional policies, processes, systems, standards, procedures, to accomplish operational objectives.<br><strong>Training</strong><br>•&nbsp;&nbsp; &nbsp;Provide on-the-job Training to meet Competency Based Training programs for UAE Nationalization.<br><strong>Tool Box</strong><br>•&nbsp;&nbsp; &nbsp;Maintain all tools, safety gear and equipment provided by company safely and in working condition.<br>•&nbsp;&nbsp; &nbsp;Arrange for repair or replacement of any tools and safety gear that may not be in good working condition.<br><strong>Time Management</strong><br>•&nbsp;&nbsp; &nbsp;Carry out all maintenance jobs in line with assigned time standards.<br>•&nbsp;&nbsp; &nbsp;Inform the Maintenance Supervisor in case additional resources are required to carry out the job within the assigned time frame.<br><strong>Innovation and Continuous Improvement</strong><br>•&nbsp;&nbsp; &nbsp;Contribute to the identification of areas and opportunities for continuous improvement in the operating procedures, modification of functional processes, machinery or equipment.<br><strong>Health, Safety, Environment (HSE) and Sustainability&nbsp;</strong><br>•&nbsp;&nbsp; &nbsp;Comply with relevant HSE policies, procedures &amp; controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices.<br>•&nbsp;&nbsp; &nbsp;Participate in Emergency Response duties as a team member.<br><strong>Housekeeping</strong><br>•&nbsp;&nbsp; &nbsp;Maintain the work environment clean and tidy before, during and after executing the job, in line with established standards of Hygiene and Housekeeping.<br><strong>Reports</strong><br>•&nbsp;&nbsp; &nbsp;Collect technical data from the field as required and provide inputs to prepare Section progress reports for Company Management.<br>•&nbsp;&nbsp; &nbsp;Provide input for the preparation of Method statements and initiate Near Miss reports.</p><br><br><br>Generic Accountabilities (continue) <br><br>Internal Communications &amp; Working Relationships <br><p>Contact with line Manager/ peers and other employees within the company/Group as required</p><br><br><br>External Communications &amp; Working Relationships <br><p>Contact with external parties including consultants, third party service providers, and government agencies as required&nbsp;</p><br><br><br>Minimum Qualification <br><p>Technical Diploma or Secondary School Certificate with a vocational trade certificate in the relevant field</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>4 years of experience, in heavy equipment mechanical repairs, within the oil/gas industry or power plants.</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br>Work Condition, Physical effort &amp; Work Environment <br><p><strong>Physical Effort</strong><br>Minimal<br><strong>Work Environment</strong><br>A/C environment, could be exposed to the prevailing weather conditions like heat, humidity &amp; dust during occasional site visits.</p><br><br><br>Additional Details <br><p>Job Family / Sub Family: Maintenance / Maintenance Execution&nbsp;</p><br><br><br><br><br> </div>

<strong>Job Purpose<br><br></strong>Perform all redressing and maintenance for all Wireline tools in order to execute the wireline operations safely and on time.<br><br>Job Specific Accountabilities (Part 1)<br><br><ul><li> Follow Wireline Operation procedures and Wireline Tools specifications.</li><li> Carry out redressing maintenance and repair of all Wireline tools.</li><li> Maintain Wireline Store and report stock levels for spare parts.</li><li> Check all the new Tools and equipment coming to Wireline Store is as per PO and update the Inventory.</li><li> Support the crews to perform the required repair for tools in case of emergency.</li><li> Carry out redress Safety Valves whenever brought from location.</li><li> Append the changes in the colour code of all Lifting Equipment as per company standard.</li><li> Report shortage of tools, parts or any deficiencies regarding equipment and safety issues.</li><li> Monitor and ensure all the Down Hole Tools are tested and certified every 6 months before expiry date.</li><li> Check and carry out the inspection like NDT and MPI Inspection of tools as per contract requirement.</li><li> Prepare for Surface Pressure Tests for all Monthly Surface Pressure Equipment.<br><br></li></ul>Job Specific Accountabilities (Part 2)<br><br>Job Specific Accountabilities (Part 3)<br><br>Generic Accountabilities<br><br><strong>Policies, Systems, Processes &amp; Procedures<br><br></strong><ul><li> Implement and comply with all relevant functional policies, processes, systems, standards, procedures, to accomplish operational objectives.<br><br></li></ul><strong>Training<br><br></strong><ul><li> Provide on-the-job Training to meet Competency Based Training programs for UAE Nationalization.<br><br></li></ul><strong>Tool Box<br><br></strong><ul><li> Maintain all tools, safety gear and equipment provided by company safely and in working condition.</li><li> Arrange for repair or replacement of any tools and safety gear that may not be in good working condition.<br><br></li></ul><strong>Time Management<br><br></strong><ul><li> Carry out all maintenance jobs in line with assigned time standards.</li><li> Inform the Maintenance Supervisor in case additional resources are required to carry out the job within the assigned time frame.<br><br></li></ul><strong>Innovation and Continuous Improvement<br><br></strong><ul><li> Contribute to the identification of areas and opportunities for continuous improvement in the operating procedures, modification of functional processes, machinery or equipment.<br><br></li></ul><strong>Health, Safety, Environment (HSE) and Sustainability <br><br></strong><ul><li> Comply with relevant HSE policies, procedures &amp; controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices.</li><li> Participate in Emergency Response duties as a team member.<br><br></li></ul><strong>Housekeeping<br><br></strong><ul><li> Maintain the work environment clean and tidy before, during and after executing the job, in line with established standards of Hygiene and Housekeeping.<br><br></li></ul><strong>Reports<br><br></strong><ul><li> Collect technical data from the field as required and provide inputs to prepare Section progress reports for Company Management.</li><li> Provide input for the preparation of Method statements and initiate Near Miss reports.<br><br></li></ul>Generic Accountabilities (continue)<br><br>Internal Communications &amp; Working Relationships<br><br>Contact with line Manager/ peers and other employees within the company/Group as required<br><br>External Communications &amp; Working Relationships<br><br>Contact with external parties including consultants, third party service providers, and government agencies as required<br><br>Minimum Qualification<br><br>Technical Diploma or Secondary School Certificate with a vocational trade certificate in the relevant field<br><br><strong>Minimum Experience, Knowledge &amp; Skills<br><br></strong>4 years of experience<br><br>Revenues/ Budget: As per approved financial budget<br><br>Direct Reports: As per organization chart<br><br>Indirect Reports: As per organization chart<br><br>Professional Certifications<br><br>As applicable<br><br>Work Condition, Physical effort &amp; Work Environment<br><br><strong>Physical Effort<br><br></strong>Minimal<br><br><strong>Work Environment<br><br></strong>A/C environment, could be exposed to the prevailing weather conditions like heat, humidity &amp; dust during occasional site visits.<br><br>Additional Details<br><br>Job Family / Sub Family: Operations/Drilling Operations

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p><span><strong>Work location: In Al Ain or Sharjah</strong></span></p><br><p>Carry out preventive &amp; corrective maintenance, inspections, and repair works for all electrical systems and&nbsp;equipment at Service Station, Vehicle Inspection Centers and Customer Sites as per equipment standards&nbsp;and manufacturers recommendations, in compliance with HSE standards. Job involves regular Self driving of&nbsp;company pick up to locations for attending to defects.</p><br><br><br>Job Specific Accountabilities <br><p><strong>Maintenance Execution</strong></p><br><ul><li>Carry out the service, repair and maintenance activities of all electrical systems and equipment including&nbsp;maintenance of low and medium Voltage Equipment, Switchgear, Control Panels, equipment and&nbsp;buildings at the Service Station, Vehicle Inspection Centers and Customer Sites, in accordance with&nbsp;corporate, engineering, and technical standards and safety and environmental requirements.</li><li>Conduct regular routine and scheduled inspection and maintenance of all electrical equipment, maintain&nbsp;records, and monitor condition continually.</li><li>Test electrical/electronic systems, equipment, and installations after repair for satisfactory operations.</li><li>Trace out and rectify faults by following the circuit diagrams and equipment drawings/manuals.</li><li>Perform a functional test on equipment and check for satisfactory working, report and attend to faults,&nbsp;carry out periodic checks on all mobile and static equipment and installations. Report and attend&nbsp;Breakdown faults, carry out any necessary repair and maintenance works, and record accordingly on&nbsp;standards forms.</li><li>Attend all assigned jobs promptly, carry out necessary repair works and ensure that equipment is&nbsp;returned to service with minimum downtime, while ensuring all safety precautions are taken before and&nbsp;during execution of electrical works.</li><li>Ensure the safety instructions are rigidly adhered to during all stages of the work in a hazardous area&nbsp;(safety checks/Lock out, Tag outs).</li><li>Carry out all electrical/electronic modification work as directed by the Electrical Supervisor and as per&nbsp;safety procedures.</li><li>Provide information to Electrical Supervisor on the status of facility, preventive and repair work&nbsp;scheduling, processing of work orders and safety work permits.</li></ul><br><br>Generic Accountabilities <br><p><strong>Policies, Systems, Processes &amp; Procedures</strong><br>•&nbsp;&nbsp; &nbsp;Implement and comply with all relevant functional policies, processes, systems, standards, procedures, to accomplish operational objectives.<br><strong>Training</strong><br>•&nbsp;&nbsp; &nbsp;Provide on-the-job Training to meet Competency Based Training programs for UAE Nationalization.<br><strong>Tool Box</strong><br>•&nbsp;&nbsp; &nbsp;Maintain all tools, safety gear and equipment provided by company safely and in working condition.<br>•&nbsp;&nbsp; &nbsp;Arrange for repair or replacement of any tools and safety gear that may not be in good working condition.<br><strong>Time Management</strong><br>•&nbsp;&nbsp; &nbsp;Carry out all maintenance jobs in line with assigned time standards.<br>•&nbsp;&nbsp; &nbsp;Inform the Maintenance Supervisor in case additional resources are required to carry out the job within the assigned time frame.<br><strong>Innovation and Continuous Improvement</strong><br>•&nbsp;&nbsp; &nbsp;Contribute to the identification of areas and opportunities for continuous improvement in the operating procedures, modification of functional processes, machinery or equipment.<br><strong>Health, Safety, Environment (HSE) and Sustainability&nbsp;</strong><br>•&nbsp;&nbsp; &nbsp;Comply with relevant HSE policies, procedures &amp; controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices.<br>•&nbsp;&nbsp; &nbsp;Participate in Emergency Response duties as a team member.<br><strong>Housekeeping</strong><br>•&nbsp;&nbsp; &nbsp;Maintain the work environment clean and tidy before, during and after executing the job, in line with established standards of Hygiene and Housekeeping.<br><strong>Reports</strong><br>•&nbsp;&nbsp; &nbsp;Collect technical data from the field as required and provide inputs to prepare Section progress reports for Company Management.<br>•&nbsp;&nbsp; &nbsp;Provide input for the preparation of Method statements and initiate Near Miss reports.</p><br><br><br>QUALIFICATIONS, EXPERIENCE, KNOWLEDGE &amp; SKILLS: <br><ul><li>Technical Diploma or Secondary School Certificate with a vocational trade certificate in the relevant&nbsp;field.</li><li>4 years of experience in Maintenance department in Oil and Gas Industry.</li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Perform all analytical testing for process streams, sampling, maintenance and HSE related samples according to internationally accepted standard methods for quality assurance.</p><br><br><br>Job Specific Accountabilities (Part 1) <br><p><strong>Laboratory Analysis &amp; Testing</strong><br>•&nbsp;&nbsp; &nbsp;Perform a variety of quantitative and qualitative laboratory tests and analysis in accordance with established testing methods and instructions.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Collect samples from the plant using international accepted standard sampling procedures to produce precise &amp; reliable data to support research studies.<br>•&nbsp;&nbsp; &nbsp;Receive sample list and enters the test analytical results using the computerised Laboratory Information System (LIMS) and Business Object reporting software to ensure accuracy.<br>•&nbsp;&nbsp; &nbsp;Prepare and standardize chemical reagents used in day to day working of the laboratory tests and on-line analysers.<br>•&nbsp;&nbsp; &nbsp;Report any instrument operating faults and apparatus damage to the immediate shift supervisor.<br>•&nbsp;&nbsp; &nbsp;Monitor the correct implementation of the sampling procedures and schedules to ensure equipment functions properly and reliable results obtained.<br>•&nbsp;&nbsp; &nbsp;Check and carry out trial runs on newly installed and/or repaired Laboratory apparatus and analyzers to ensure proper functioning and accuracy of delivered items.<br>•&nbsp;&nbsp; &nbsp;Update inventory records of chemicals, calibration reference materials, calibration gases, inert gases, equipment spares and consumables to ensure timely replenishment</p><br><br><br>Job Specific Accountabilities (Part 2) <br><br>Job Specific Accountabilities (Part 3) <br><br>Generic Accountabilities <br><p><strong>Policies, Systems, Processes &amp; Procedures</strong><br>•&nbsp;&nbsp; &nbsp;Implement and comply with all relevant functional policies, processes, systems, standards, procedures, to accomplish operational objectives.<br><strong>Training</strong><br>•&nbsp;&nbsp; &nbsp;Provide on-the-job Training to meet Competency Based Training programs for UAE Nationalization.<br><strong>Tool Box</strong><br>•&nbsp;&nbsp; &nbsp;Maintain all tools, safety gear and equipment provided by company safely and in working condition.<br>•&nbsp;&nbsp; &nbsp;Arrange for repair or replacement of any tools and safety gear that may not be in good working condition.<br><strong>Time Management</strong><br>•&nbsp;&nbsp; &nbsp;Carry out all maintenance jobs in line with assigned time standards.<br>•&nbsp;&nbsp; &nbsp;Inform the Maintenance Supervisor in case additional resources are required to carry out the job within the assigned time frame.<br><strong>Innovation and Continuous Improvement</strong><br>•&nbsp;&nbsp; &nbsp;Contribute to the identification of areas and opportunities for continuous improvement in the operating procedures, modification of functional processes, machinery or equipment.<br><strong>Health, Safety, Environment (HSE) and Sustainability&nbsp;</strong><br>•&nbsp;&nbsp; &nbsp;Comply with relevant HSE policies, procedures &amp; controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices.<br>•&nbsp;&nbsp; &nbsp;Participate in Emergency Response duties as a team member.<br><strong>Housekeeping</strong><br>•&nbsp;&nbsp; &nbsp;Maintain the work environment clean and tidy before, during and after executing the job, in line with established standards of Hygiene and Housekeeping.<br><strong>Reports</strong><br>•&nbsp;&nbsp; &nbsp;Collect technical data from the field as required and provide inputs to prepare Section progress reports for Company Management.<br>•&nbsp;&nbsp; &nbsp;Provide input for the preparation of Method statements and initiate Near Miss reports.</p><br><br><br>Generic Accountabilities (continue) <br><br>Internal Communications &amp; Working Relationships <br><p>Contact with line Manager/ peers and other employees within the company/Group as required</p><br><br><br>External Communications &amp; Working Relationships <br><p>Contact with external parties including consultants, third party service providers, and government agencies as required&nbsp;</p><br><br><br>Minimum Qualification <br><p>Technical Diploma or Secondary School Certificate with a vocational trade certificate in the relevant field</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>4 years of experience</p><br><p>Revenues/ Budget: As per approved financial budget<br>Direct Reports: As per organization chart<br>Indirect Reports: As per organization chart</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br>Work Condition, Physical effort &amp; Work Environment <br><p><strong>Physical Effort</strong><br>Minimal<br><strong>Work Environment</strong><br>A/C environment, could be exposed to the prevailing weather conditions like heat, humidity &amp; dust during occasional site visits</p><br><br><br>Additional Details <br><p>Job Family / Sub Family: Quality Assurance &amp; Quality Control / Laboratory Services</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Perform all redressing and maintenance for all Wireline tools in order to execute the wireline operations safely and on time.</p><br><br><br>Job Specific Accountabilities (Part 1) <br><p>•&nbsp;&nbsp; &nbsp;Follow Wireline Operation procedures and Wireline Tools specifications.<br>•&nbsp;&nbsp; &nbsp;Carry out redressing maintenance and repair of all Wireline tools.<br>•&nbsp;&nbsp; &nbsp;Maintain Wireline Store and report stock levels for spare parts.<br>•&nbsp;&nbsp; &nbsp;Check all the new Tools and equipment coming to Wireline Store is as per PO and update the Inventory.<br>•&nbsp;&nbsp; &nbsp;Support the crews to perform the required repair for tools in case of emergency.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Carry out redress Safety Valves whenever brought from location.<br>•&nbsp;&nbsp; &nbsp;Append the changes in the colour code of all Lifting Equipment as per company standard.<br>•&nbsp;&nbsp; &nbsp;Report shortage of tools, parts or any deficiencies regarding equipment and safety issues.<br>•&nbsp;&nbsp; &nbsp;Monitor and ensure all the Down Hole Tools are tested and certified every 6 months before expiry date.<br>•&nbsp;&nbsp; &nbsp;Check and carry out the inspection like NDT and MPI Inspection of tools as per contract requirement.<br>•&nbsp;&nbsp; &nbsp;Prepare for Surface Pressure Tests for all Monthly Surface Pressure Equipment.</p><br><br><br>Job Specific Accountabilities (Part 2) <br><br>Job Specific Accountabilities (Part 3) <br><br>Generic Accountabilities <br><p><strong>Policies, Systems, Processes &amp; Procedures</strong><br>•&nbsp;&nbsp; &nbsp;Implement and comply with all relevant functional policies, processes, systems, standards, procedures, to accomplish operational objectives.<br><strong>Training</strong><br>•&nbsp;&nbsp; &nbsp;Provide on-the-job Training to meet Competency Based Training programs for UAE Nationalization.<br><strong>Tool Box</strong><br>•&nbsp;&nbsp; &nbsp;Maintain all tools, safety gear and equipment provided by company safely and in working condition.<br>•&nbsp;&nbsp; &nbsp;Arrange for repair or replacement of any tools and safety gear that may not be in good working condition.<br><strong>Time Management</strong><br>•&nbsp;&nbsp; &nbsp;Carry out all maintenance jobs in line with assigned time standards.<br>•&nbsp;&nbsp; &nbsp;Inform the Maintenance Supervisor in case additional resources are required to carry out the job within the assigned time frame.<br><strong>Innovation and Continuous Improvement</strong><br>•&nbsp;&nbsp; &nbsp;Contribute to the identification of areas and opportunities for continuous improvement in the operating procedures, modification of functional processes, machinery or equipment.<br><strong>Health, Safety, Environment (HSE) and Sustainability&nbsp;</strong><br>•&nbsp;&nbsp; &nbsp;Comply with relevant HSE policies, procedures &amp; controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices.<br>•&nbsp;&nbsp; &nbsp;Participate in Emergency Response duties as a team member.<br><strong>Housekeeping</strong><br>•&nbsp;&nbsp; &nbsp;Maintain the work environment clean and tidy before, during and after executing the job, in line with established standards of Hygiene and Housekeeping.<br><strong>Reports</strong><br>•&nbsp;&nbsp; &nbsp;Collect technical data from the field as required and provide inputs to prepare Section progress reports for Company Management.<br>•&nbsp;&nbsp; &nbsp;Provide input for the preparation of Method statements and initiate Near Miss reports.</p><br><br><br>Generic Accountabilities (continue) <br><br>Internal Communications &amp; Working Relationships <br><p>Contact with line Manager/ peers and other employees within the company/Group as required</p><br><br><br>External Communications &amp; Working Relationships <br><p>Contact with external parties including consultants, third party service providers, and government agencies as required&nbsp;</p><br><br><br>Minimum Qualification <br><p>Technical Diploma or Secondary School Certificate with a vocational trade certificate in the relevant field</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>4 years of experience</p><br><p>Revenues/ Budget: As per approved financial budget<br>Direct Reports: As per organization chart<br>Indirect Reports: As per organization chart</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br>Work Condition, Physical effort &amp; Work Environment <br><p><strong>Physical Effort</strong><br>Minimal<br><strong>Work Environment</strong><br>A/C environment, could be exposed to the prevailing weather conditions like heat, humidity &amp; dust during occasional site visits.</p><br><br><br>Additional Details <br><p>Job Family / Sub Family: Operations/Drilling Operations</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Perform preventive, corrective and troubleshooting maintenance, and testing of all Plant Instrument Process Monitoring, Control Protective equipment with applicable procedures and guidelines.</p><br><br><br>Job Specific Accountabilities (Part 1) <br><p><strong>Instrument &amp; Control Maintenance</strong><br>•&nbsp;&nbsp; &nbsp;Carry out routine and preventive maintenance work, repair and testing of equipment in line with Standard Operating Procedures (SOP’s) and standards to fulfil the requirements of the work request or work order.<br>•&nbsp;&nbsp; &nbsp;Carry out preventive maintenance activities maintenance and participate in the assigned plant shutdown activities and ensure timely completion of job activities.<br>•&nbsp;&nbsp; &nbsp;Verify completed maintenance activities to ensure that the job is performed as per requirement and complete the maintenance activity sheet<br>•&nbsp;&nbsp; &nbsp;Carry out inspection and exercise vigilance to identify any developing problem in the area assigned and report any problems.<br>•&nbsp;&nbsp; &nbsp;Trouble shoot, repair calibrate and test various types of process control instruments and relay logic, to keep the instrumentation systems as designed.<br>•&nbsp;&nbsp; &nbsp;Perform preventive and emergency maintenance on all equipment on site as well as during machine scheduled or unscheduled shutdowns to ensure the availability of all equipment in reliable conditions during running and prevent unforeseen trips.<br>•&nbsp;&nbsp; &nbsp;Perform field and/or system modifications of control elements and/or control loops as per the plant change requests and assist to update all related plant drawings to reflect the actual changes thus enhancing the plant operation in line with the management of change of procedure.<br>•&nbsp;&nbsp; &nbsp;Assist in upgrading and retrofitting of new control instruments to the existing panels in the field and main control room as and when required for completion of modifications and the PCR in line with standards.</p><br><br><br>Job Specific Accountabilities (Part 2) <br><br>Job Specific Accountabilities (Part 3) <br><br>Generic Accountabilities <br><p><strong>Policies, Systems, Processes &amp; Procedures</strong><br>•&nbsp;&nbsp; &nbsp;Implement and comply with all relevant functional policies, processes, systems, standards, procedures, to accomplish operational objectives.<br><strong>Training</strong><br>•&nbsp;&nbsp; &nbsp;Provide on-the-job Training to meet Competency Based Training programs for UAE Nationalization.<br><strong>Tool Box</strong><br>•&nbsp;&nbsp; &nbsp;Maintain all tools, safety gear and equipment provided by company safely and in working condition.<br>•&nbsp;&nbsp; &nbsp;Arrange for repair or replacement of any tools and safety gear that may not be in good working condition.<br><strong>Time Management</strong><br>•&nbsp;&nbsp; &nbsp;Carry out all maintenance jobs in line with assigned time standards.<br>•&nbsp;&nbsp; &nbsp;Inform the Maintenance Supervisor in case additional resources are required to carry out the job within the assigned time frame.<br><strong>Innovation and Continuous Improvement</strong><br>•&nbsp;&nbsp; &nbsp;Contribute to the identification of areas and opportunities for continuous improvement in the operating procedures, modification of functional processes, machinery or equipment.<br><strong>Health, Safety, Environment (HSE) and Sustainability&nbsp;</strong><br>•&nbsp;&nbsp; &nbsp;Comply with relevant HSE policies, procedures &amp; controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices.<br>•&nbsp;&nbsp; &nbsp;Participate in Emergency Response duties as a team member.<br><strong>Housekeeping</strong><br>•&nbsp;&nbsp; &nbsp;Maintain the work environment clean and tidy before, during and after executing the job, in line with established standards of Hygiene and Housekeeping.<br><strong>Reports</strong><br>•&nbsp;&nbsp; &nbsp;Collect technical data from the field as required and provide inputs to prepare Section progress reports for Company Management.<br>•&nbsp;&nbsp; &nbsp;Provide input for the preparation of Method statements and initiate Near Miss reports.</p><br><br><br>Generic Accountabilities (continue) <br><br>Internal Communications &amp; Working Relationships <br><p>Contact with line Manager/ peers and other employees within the company/Group as required</p><br><br><br>External Communications &amp; Working Relationships <br><p>Contact with external parties including consultants, third party service providers, and government agencies as required&nbsp;</p><br><br><br>Minimum Qualification <br><p>Technical Diploma or Secondary School Certificate with a vocational trade certificate in the relevant field</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>4 years of experience</p><br><p>Revenues/ Budget: As per approved financial budget<br>Direct Reports: As per organization chart<br>Indirect Reports: As per organization chart</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br>Work Condition, Physical effort &amp; Work Environment <br><p><strong>Physical Effort</strong><br>Minimal<br><strong>Work Environment</strong><br>A/C environment, could be exposed to the prevailing weather conditions like heat, humidity &amp; dust during occasional site visits.</p><br><br><br>Additional Details <br><p>Job Family / Sub Family: Maintenance / Maintenance Execution</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Job Purpose <br><p>Perform Electric, Gas and TIG welding tasks for Maintenance, Fabrication and Repair work on Static equipment.</p><br><br><br>Job Specific Accountabilities (Part 1) <br><p><strong>Welding Operations</strong><br>•&nbsp;&nbsp; &nbsp;Carry out a wide variety of Welding, Cutting and Brazing work as per technical specifications and safety standards and regulations.<br>•&nbsp;&nbsp; &nbsp;Perform hot work as per PTW requirements in compliance with the correct use of PPE for self and co-workers. Perform shop floor and field welding in a safe and effective manner.<br>•&nbsp;&nbsp; &nbsp;Perform routine maintenance on welding and cutting tools and equipment, to report any defects to the supervisor, carry out welding work required in the maintenance and repair of structures, tanks, furnaces, boilers, steel stacks, heat exchangers, air coolers, vessels, etc.<br>•&nbsp;&nbsp; &nbsp;Performs joint preparation for welding minor fabrications jobs, and assist fabricator to prepare weld map and welding summary sheet during execution of fabrication activities.<br>•&nbsp;&nbsp; &nbsp;Carry out highly skilled welding of all sorts of steel/alloy, non-ferrous, pipelines and structures for use in the plant utilizing different welding procedures like SMAW, TIG Welds, etc. to ensure the execution of welding works as required.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Operate metal shaping machines such as brakes, shears and other metal straightening and bending machines.<br>•&nbsp;&nbsp; &nbsp;Reads and interpret blueprints or welding process specification in order to obtain necessary equipment, tools and materials.<br>•&nbsp;&nbsp; &nbsp;Participate in the assigned plant shutdown activities and ensure timely completion of job activities.<br>•&nbsp;&nbsp; &nbsp;Carry out visual inspection and exercise vigilance to identify any developing problem in the area assigned and report any problems to the supervisor. Assist in performing welding tests as required by the Inspection section.</p><br><br><br>Job Specific Accountabilities (Part 2) <br><br>Job Specific Accountabilities (Part 3) <br><br>Generic Accountabilities <br><p><strong>Policies, Systems, Processes &amp; Procedures</strong><br>•&nbsp;&nbsp; &nbsp;Implement and comply with all relevant functional policies, processes, systems, standards, procedures, to accomplish operational objectives.<br><strong>Training</strong><br>•&nbsp;&nbsp; &nbsp;Provide on-the-job Training to meet Competency Based Training programs for UAE Nationalization.<br><strong>Tool Box</strong><br>•&nbsp;&nbsp; &nbsp;Maintain all tools, safety gear and equipment provided by company safely and in working condition.<br>•&nbsp;&nbsp; &nbsp;Arrange for repair or replacement of any tools and safety gear that may not be in good working condition.<br><strong>Time Management</strong><br>•&nbsp;&nbsp; &nbsp;Carry out all maintenance jobs in line with assigned time standards.<br>•&nbsp;&nbsp; &nbsp;Inform the Maintenance Supervisor in case additional resources are required to carry out the job within the assigned time frame.<br><strong>Innovation and Continuous Improvement</strong><br>•&nbsp;&nbsp; &nbsp;Contribute to the identification of areas and opportunities for continuous improvement in the operating procedures, modification of functional processes, machinery or equipment.<br><strong>Health, Safety, Environment (HSE) and Sustainability&nbsp;</strong><br>•&nbsp;&nbsp; &nbsp;Comply with relevant HSE policies, procedures &amp; controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices.<br>•&nbsp;&nbsp; &nbsp;Participate in Emergency Response duties as a team member.<br><strong>Housekeeping</strong><br>•&nbsp;&nbsp; &nbsp;Maintain the work environment clean and tidy before, during and after executing the job, in line with established standards of Hygiene and Housekeeping.<br><strong>Reports</strong><br>•&nbsp;&nbsp; &nbsp;Collect technical data from the field as required and provide inputs to prepare Section progress reports for Company Management.<br>•&nbsp;&nbsp; &nbsp;Provide input for the preparation of Method statements and initiate Near Miss reports.</p><br><br><br>Generic Accountabilities (continue) <br><br>Internal Communications &amp; Working Relationships <br><p>Contact with line Manager/ peers and other employees within the company/Group as required</p><br><br><br>External Communications &amp; Working Relationships <br><p>Contact with external parties including consultants, third party service providers, and government agencies as required&nbsp;</p><br><br><br>Minimum Qualification <br><p>Secondary School Certificate with a vocational trade certificate in Welding</p><br><br><br>Minimum Experience, Knowledge &amp; Skills <br><p>4 years of experience, in welding and repairing of static equipment within a large industrial plant, preferably in the Oil and Gas industry.</p><br><p>Revenues/ Budget: As per approved financial budget<br>Direct Reports: As per organization chart<br>Indirect Reports: As per organization chart</p><br><br><br>Professional Certifications <br><p>As applicable</p><br><br><br>Work Condition, Physical effort &amp; Work Environment <br><p><strong>Physical Effort</strong><br>Minimal<br><strong>Work Environment</strong><br>A/C environment, could be exposed to the prevailing weather conditions like heat, humidity &amp; dust during occasional site visits.</p><br><br><br>Additional Details <br><p>Job Family / Sub Family: Maintenance / Maintenance Execution</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Title <br></span><p>Maintenance Supervisor</p><br> <br><br>Business <br><p>HORIZON EMIRATES TERMINALS</p><br> <br><br>Job Purpose <br><p>Responsible for the preventive and breakdown maintenance and upkeep of all the equipment's/assets owned by HEFD and HEFT. Management of maintenance, including the manpower, spare parts inventory, technical training and monitoring of maintenance expense. Also responsible for the technical inspections of new equipments/ spare parts. To assist Maintenance Superintendent &amp; Technical Engineer in routine and non-routine maintenance and project related works.</p><br> <br><br>Principal Accountabilities <br><p>Reports to Maintenance Superintendent for all routine maintenance activities of Mechanical and E&amp;I equipment including preventive maintenance/ breakdown, as well coordinate with HETL Technical Engineer for all the project related activities.</p><br> <p>Manages the Terminal maintenance program based on best practices in the Terminal Oil industry and in line with IMS and HTL guideline with an emphasis on planning/scheduling and preventive/predictive maintenance by evaluating and reviewing the maintenance schedule of HEFD equipment.</p><br> <p>Supervise and execute the PM as per the approved annual PM plan in line with IMS requirements.</p><br> <p>Direct Supervision of HEFD Maintenance team in the overall installation, maintenance and servicing of all equipment and infrastructure, necessary for the continuity of operations and the safety of Terminal personnel, by ensuring the equipment reliability and availability.</p><br> <p>Follow up/supervise AMC contractor and certification/re-certification requirements of maintenance related equipments, meters, instruments and others critical equipments as necessary.</p><br> <p>Responsible for implementation of maintenances producers, work instruction and check lists. To upkeep all necessary maintenance records and maintenance history of all necessary critical equipment of the Terminal. To undertake review and updation of all Maintenance Department IMS documents as and when required.</p><br> <p>Monitors the use and inventories of spare parts, maintenance supplies, and equipment and initiates reordering when necessary and responsible for stock updation, spares planning, spares procurement and for both critical and non­ critical equipments in coordination with Maintenance Superintendent and purchase function.</p><br> <p>To coordinate with operations for pre-commissioning and commissioning of new facilities on completion of the same.</p><br> <p>To coordinate with HETL Technical Engineer and Terminal Superintendent operation team for execution of any project related activities in the Terminal.</p><br> <p>Responsible to ensures that maintenance team are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner in close coordination with Maintenance Superintendent and EHSSQ Manager.</p><br> <p>Assist Maintenance Superintendent in preparation of annual maintenance Opex and Capex budget</p><br> <p>Responsible for the training of maintenance team on the Part of the Emergency Response Team involved in the periodic maintenance and upkeep of the Terminal Fire Fighting systems. To closely coordinate with EHSSQ Manager/ EHSSQ Officer for periodic GEHSQ inspection/audits/follow ups and FF System inspection on a routine basis</p><br> <p>Directs routine and non routine EHS audits including risk assessments and safety reviews of maintenance related requirements.</p><br> <p>Performs technical evaluation of equipment manufacturers and service providers/AMC and suppliers in coordination with GPC for all maintenance related requirements.</p><br> <p>Prepares daily/ weekly and monthly maintenance reports as required, analyzes data and makes recommendations for improving Terminal operations and solving maintenance-related problems</p><br> <p>Reviews the operation of Terminal Equipment and systems constantly to minimize unplanned downtime, anticipate and solve problems in a timely manner by identifying opportunities for improvement</p><br> <p>To be conversant with IMS system involving Quality (QM ). Environment (EMS) and Safety (OHS) and be the focal point of maintenance department. To participate in the periodic review/ audit/ meetings and follow of the IMS in close coordination with MR.<br> &nbsp;</p><br> <br><br>Additional Principal Accountabilities <br><p>Tracks, analyzes and improves the key performance indicator of maintenance parameters such as asset utilization, maintenance cost, PM compliance, schedule compliance, etc. and submits monthly reports to Maintenance Superintendent</p><br> <p>Maintains and enforces Environment, Health and Safety policies and procedures implementation within Maintenance team<br> &nbsp;</p><br> <br><br>Cyber Information Security Responsibilities <br><p><br> Comply with all applicable information security policies, standards, and procedures.<br>Classify and protect information assets in accordance with the Data Classification Standard.<br>Participate in mandatory information security awareness and training programs.<br>Support information security initiatives and activities within the organization.<br>Consider information security requirements when managing changes involving information assets.<br>Report security incidents, vulnerabilities, weaknesses, or non-compliance in accordance with established procedures.<br>Fulfil role-specific information security responsibilities and contribute to maintaining the effectiveness of the Information Security Management System (ISMS).</p><br><br><br>Experience <br><p>Educational Qualification: Engineering Degree / Higher Diploma holder preferable in Mechanical Engineering</p><br> <p>Experience: Minimum of 8 years of experience in Terminals/Oil&amp;Gas/ Chemical/ Refinery in a supervisory cadre.</p><br> <p>Behavioural and Functional Competencies: Good organizational, leadership qualities. Good verbal and written communication skills in English. Good computer skills and conversant in report generation<br> &nbsp;</p><br> <br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Certified as a Top Employer in the UAE, Qatar, KSA, and Oman, KONE is dedicated to creating a superior workplace through outstanding people practices. We emphasize cultivating a great work culture, inspiring high standards of quality and efficiency, and fostering an environment that promotes collaboration, diversity, growth, and well-being.</p><br><p><b>CSE Engineer (Product):</b></p><br><p><span>A CSE Engineer, Product provides technical expertise on the optimal KONE product for the customer. He/she understands how customer needs are translated into product-specific requirements <span>and is accountable for coordination of all engineering work until the project is handed over to maintenance. </span>Takes part in non-standard solutions, tendering with expertise on KONE products like Elevators, Escalators and Autowalks, machine-room-less elevators, high rises, </span></p><br><p><span>He/she provides technical expertise support to the FL CSE, field operation and sales team in Delivery process to handle order management and successfully implements KONE products and service solutions, that meet customer’s contract specification by cost and leads time effective way, while ensuring compliance to codes and standards.<br>This role description applies to CSE Engineer, Project in KMTA CSE Functional Services.</span></p><br><p><b>Responsibilities and key tasks</b></p><br><p>Collaboration with sales:</p><br><ul><li><p>Responsible for finding the optimal KONE product to meet the customer’s needs for non-standard with Special Engineering requirements.</p><br></li><li><p>Selects the correct product platform on which to make the offer and Ensure the offer is Competitive.</p><br></li></ul><p>Product planning – Costing:</p><br><ul><li><p>Involves Supply Line, installation, maintenance and project management to understand both the materials and the service cost of the product when needed</p><br></li><li><p>Responsible for correct product costings in non-standard cases, both for corporate and local Materials</p><br></li></ul><p>Product planning – Specs:</p><br><ul><li><p>Accountable for detailed, custom product plans for non-standard cases (collaborates with the SL Engineering team when needed)</p><br></li><li><p>Creates product specifications for corporate materials and local materials.</p><br></li><li><p>Performs initial and revised non-standard energy calculations.</p><br></li><li><p>Performs simple traffic analyses.</p><br></li><li><p>When accountable for the overall engineering of the project:</p><br></li><li><p>Accountable for technical site surveys</p><br></li><li><p>Accountable for the technical content of the order between MS 0b and MS 2z</p><br></li></ul><p>Product planning – Availability and lead times</p><br><ul><li><p>Coordinates product lead times from Supply Line and local sourcing</p><br></li></ul><p>Product planning – Installability</p><br><ul><li><p>Ensures that the proposed product can be installed</p><br></li><li><p>Ensures that the cost and work effort impact of installation is part of product plans, especially in non-standard installation situations</p><br></li></ul><p>Product planning – Maintainability</p><br><ul><li><p>Ensures that the planned proposed product fulfils the customer’s product lifecycle needs</p><br></li><li><p>Identifies possible deviations to standard maintenance methods and ensures that resolutions are found</p><br></li></ul><p>Product planning – Compliance</p><br><ul><li><p>Ensures that the proposed product fulfils local codes, regulations and safety requirements</p><br></li><li><p>Ensures alignment with environmental regulations</p><br></li><li><p>Ensures that the planned product complies with KONE’s Engineering Policy</p><br></li></ul><p>Key tasks in the KONE Customer process</p><br><ul><li><p>Provides content for pre-booking reviews (technical product, costs, lead times, risks, and verification of technical content in contracts)</p><br></li><li><p>Executes activities for holistic product planning</p><br></li></ul><p>Key tasks in the KONE Delivery process</p><br><p>Accountable for creation of layouts · Analyses change requirements, and makes proposals on new product design · Provides needed details to the CSE Specialist on ordering materials and completing the documentation process · Provides product-related information to the Project Manager, Installation Supervisor and Maintenance Supervisor CSE Product Engineer’s role in the KONE SEB process · Shares knowledge with maintenance as needed General responsibilities · Participates in product and new service release information-sharing sessions · Provides technical trainings to Sales, Installation and Maintenance as per Front Line needs · Offers input to the product offering management about customization, standardization and interface requirements for the portfolio</p><br><p><b><span>Requirement for the role</span></b></p><br><ul><li><p>Diploma / Bachelor’s degree in Mechanical, Electrical and Civil Engineering</p><br></li><li><p>Candidate with minimum five years of experience in Elevator Industry and AutoCAD</p><br></li><li><p>Proficient with MS Office Word, Excel and PowerPoint.</p><br></li><li><p>Excellent communication and influencing skills in English and Arabic is an asset</p><br></li><li><p>Excellent collaboration skills and capability to teamwork with people from different cultural backgrounds</p><br></li><li><p>Capability for analytical thinking and focus on details - distinguishes between important information and irrelevant or minor details.</p><br></li><li><p>Ability to work with global colleagues considering different time zones, language competences and differences in working culture.</p><br></li><li><p>Excellent technical understanding of elevator, escalator and Advanced People Flow solutions that meet the customer expectations is considered a plus.</p><br></li></ul><p><i>At KONE, we are focused on creating an innovative and collaborative working culture where we value the contribution of each individual. Employee engagement is a key focus area for us and we encourage participation and the sharing of information and ideas. Sustainability is an integral part of our culture and the daily practice. We follow ethical business practices and we seek to develop a culture of working together where co-workers trust and respect each other and good performance is recognized. In being a great place to work, we are proud to offer a range of experiences and opportunities that will help you to achieve your career and personal goals and enable you to live a healthy and balanced life.</i></p><br><p>Read more on <span><i><u>https://kone.com/global/en/careers.html</u></i></span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Special Note – Jakarta Recruitment Event</b> <br><p>This vacancy is linked to Air Arabia’s upcoming <strong>invitation-only Engineering Recruitment Event in Jakarta, Indonesia</strong>.&nbsp; Candidates should apply to this vacancy only if they are available to attend the recruitment event in Jakarta during the <strong>first week of September 2026</strong>, subject to being shortlisted and invited by Air Arabia.&nbsp; Full event details, including venue, date, timing and interview schedule, will be shared only with shortlisted candidates prior to the event.</p><br><br><br><p>If you are interested in similar Air Arabia opportunities but are not available to attend the Jakarta event, please apply separately to the relevant non-event vacancy on the Air Arabia careers site.</p><br><br><b>Job Purpose</b> <br><p><span><span><span><span>The successful candidate will monitor, verify and control the documentation of all heavy /base maintenance checks and work packages ensuring they are all timely and adequately executed in line with agreed maintenance plans and in adherence to Air Arabia adopted Procedures Manual and CAMO requirements.</span></span></span></span></p><br><br><b>Key Result Responsibilities</b> <br><ul><li>Carries out necessary document control and verification of all the heavy maintenance tasks and work packages documentation received from the “Maintenance Planning” ensuring they are all prepared, distributed, and displayed on the action board.</li><li>Ensures proper awareness of relevant TPM, MOE Manual procedures for Production Control in all checks executed, this includes A-checks, C-checks, Engine and APU change checks.&nbsp;</li><li>Distributes the planned maintenance cards in the Control Docks maintaining proper sequence and order in the display.&nbsp;</li><li>Processes, prioritizes, distributes and ensures the proper execution of any additional maintenance cards resulting from the inspection (Pre-docking, ship-shop-ship/ inspection/ routine/clean/lube/servicing/final inspection).</li><li>Monitors the maintenance work progress continuously to ensure smooth workflow; reports to the “Supervisor -Maintenance Planning &amp; Records” any delay or deviation from the planned flow chart and implements corrective measures accordingly.</li><li>Raises non routine maintenance cards for all defects incoming from the Crew and recorded in the Technical Log Book/Cabin Log; follows up on the proper action as per adopted procedures.</li><li>Handles all entries related to the deferred defects in the AMOS system; efficiently compiles and submits debrief report on aircraft departure.</li><li>Monitors the man-hours booking and roster prepared and communicated by the “Planning Engineer” versus the actual man-hours logged for each aircraft to ensure compatibility and report any variations or changes accordingly.</li><li>Reviews the documents of all completed tasks received from the Engineers against the original pre-documentation approved to identify any variations or discrepancies prior to issuing associated certification.&nbsp;</li><li>Prepares list of all the materials/tools shortages; communicates to “Technical Procurement” for proper action and follows up on status till necessary items are received and handed to concerned personnel.</li><li>Coordinates with the “Technical Procurement” regarding ad-hoc requirements in case of AOG.</li><li>Prepares updated records sheets to document all component changes for each hangar input; continuously updates and maintains the necessary records till the checks are successfully completed.</li><li>Coordinates with MCC and Line Maintenance on the next planning to allow the serviced aircraft proceed accordingly prior to confirming release.</li><li>Forwards the completed work packages to the “Maintenance Planning” team and the records to the “Technical Records” team upon the completion of maintenance tasks, and the departure of the aircraft,&nbsp; as per adopted procedures and in line with approved standards.</li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li>Bachelor degree in Aircraft Engineering/Aeronautical/Electro-Mechanical or equivalent; alternately a higher diploma or certificate a relating from a recognized university or engineering college combined with needed experience and exposure.</li><li>Training certificates or workshops on “Human Factor” are highly desirable.</li><li>Able to obtain necessary Quality Assurance Authorization for the related function.</li><li>Project Management certificate or alternately the proven corresponding working experience.</li><li>Cost Control, Compliance, Budgeting and Quality Assurance certificates and trainings are an added value and some may be treated as conditional for this role.</li><li>Capable of using technology systems &amp; tools; proficient in Microsoft suite.</li><li>Very good written and verbal communication skills: reporting, presentations, etc.</li><li>Fluent in English Language.</li></ul><br><b>Work Experience</b> <br><ul><li>Ability to work under pressure and in rotating shift pattern including nights.</li><li>3+ years’ experience in the Aviation industry working in a similar capacity in the maintenance planning and records function, experience with low cost airline/Airbus A320 aircraft is preferred.</li><li>Experienced in aircrafts airworthiness programs requirements and regulations, such as CAMO (Continuing Airworthiness Management Organization).</li><li>Strong knowledge of all planning documents (MPD, MRB, AMP) and corresponding procedures.</li><li>Good understanding of aircraft planning systems and techniques and their relation to aircraft maintenance program.</li><li>Has direct working experience with Civil Aviation Authorities, preferably GCAA; familiar with all rules and regulations of GCAA pertaining to Maintenance, policies, procedures, manuals and licensing.</li><li>Experienced teamwork with (Engineers and Technicians) in a frequently changing environment with heavy work-load schedules and ad-hoc scenarios.</li><li>Exposure on EASA part 145, part 21 and sub part “M” requirements.</li><li>A balanced personality with focus, efficiency and commitment to successful results.</li><li>Cost- oriented, with high accuracy and attention to details.</li></ul><br><br> </div>

<p><strong><u>KEY ACCOUNTABILITIES:</u></strong></p><p><br></p><ul><li>Daily contact with MTPO, field maintenance personnel on maintenance boat, barges, mobile crew, Wireline Supervisor, PE (O/W/G) in A/D and other Production personnel.</li><li>Frequents contact with Drilling Supervisors (drilling rigs), Safety Engineers complex Maintenance Supervisor (WB), Planning Engineer, Inspection Engineer to discuss day to day well head tower conditions and carry out safety tour.</li><li>Monitoring plant such as WI CSP PGP GTP NGTP and riser platforms including, operation preparation for maintenance efficiently and safely.</li><li>Evaluates daily pertaining equipment performance, prepares productions reports and recommends to manager for improvement. Supervises and participates in preparing the plant/ equipment for maintenance.</li><li>Ensures appropriate implementations of the developed OPERGUID procedures for all plant operations and maintenance activities and ensures regular evaluations and updates of procedures for optimizations and safe operations.</li><li>Maintain good line of communication with the control rooms such as DAS CCR, ZW CCR, T-ABK CCR, ADGAS CCR IGD/LNG to meets the company’s productions terms of quality and quantity.</li><li>Monitor and control the Fire and Gas operation / conditions of both complex and field and take the appropriate action.</li><li>Ensure sub-ordinates and contractors are fully aware and adhere to the company’s HSE program, procedures, standards and systems.</li><li>Report and investigate accidents/ incidents and makes necessary recommendation for improvements.</li><li>Directs controls and supervises the activities of a team of contractor workforce involved in operating the production facilities, including starting up, shut down the wells preparation for maintenance, reservoir monitoring, pressure survey oil / water sampling housekeeping etc.</li><li>Monitors and supervises through the control room facilities oil, gas and water production from the well head tower to the plant, vice versa to meet daily target and ADGAS demand.</li><li>Monitor and co-ordinate marine vessels, Barges, drilling rigs, helicopter and boat movement personnel movements by controlling flying hours and make sure all work are carried out as per ADNOC regulations.</li><li>Supervises the operation of Oil, Gas and Water production&nbsp;and injection, including opening closing wells, adjustment wells, carrying out well testing utilizing test separator on test vessels, chemical injection etc.</li><li>Issuing permits to work to Performing authorities ADNOC personnel or contractors, carry out risk assessments and procedure on non-routine tasks including self-audit, planned inspection, classify equipment from hazard point of view, conduct regular safety meetings with subordinates to promote awareness of safety of HSE and ensure highest safety standard is adopted as per HSE and ISO-14001.</li><li>Issuing work service request, work order, material request through the passport and action all reported near misses.</li><li>Represents company on board test vessel, supervises flow testing, clean up, unloading and bleed down operation.</li><li>Carry out safety audit and planned safety inspection for WHT’s and Test Vessel.</li><li>Conduct group safety meeting with all team members and contractor personnel to prompt awareness of ADNOC safety regulations.</li><li>Ensures adherence of contracted work force on any given project Company’s safety policy, standards and procedures.</li><li>Ensure high level of safety in the field and make sure all subordinate personnel are given safety training and records are updated.</li><li>Ensures adherence to Environment Management System ISO-14001 and with regard to hazardous / domestic wastes segregation and handling procedure.</li><li>Conducts risk assessments, toolbox meetings and prepare/ reviews special procedures for non-routine operations and maintenance activities.</li><li>Troubleshoots operations problems and reports major problems and emergencies to operation Manager with proposed solutions.&nbsp;</li><li>Plan, supervise and coordinate all activities in the assigned area to meet functional objectives.</li><li>Train and develop the assigned staff on relevant skills to enable them to become proficient on the job and deliver the respective section objectives.</li></ul><p><br></p>

<ul><li><p>.Key Responsibilities</p><ul><li><p>Supervise and lead a team of maintenance technicians.</p></li><li><p>Plan, coordinate, and monitor daily maintenance activities.</p></li><li><p>Carry out preventive and corrective maintenance of machinery and equipment.</p></li><li><p>Troubleshoot mechanical breakdowns and ensure timely repairs.</p></li><li><p>Inspect machinery and equipment to identify potential maintenance issues.</p></li><li><p>Ensure all maintenance activities are completed safely and efficiently.</p></li><li><p>Maintain and service mechanical systems, pumps, motors, conveyors, compressors, and other industrial/farm equipment.</p></li><li><p>Coordinate maintenance schedules to minimize equipment downtime.</p></li><li><p>Monitor spare parts, tools, and maintenance materials.</p></li><li><p>Maintain accurate records of repairs, inspections, preventive maintenance, and breakdowns.</p></li><li><p>Assign tasks to technicians and monitor their performance.</p></li><li><p>Provide technical guidance and support to the maintenance team.</p></li><li><p>Ensure compliance with health, safety, and company maintenance procedures.</p></li><li><p>Coordinate with farm/operations teams to ensure uninterrupted daily operations.</p></li><li><p>Identify recurring equipment problems and recommend corrective actions.</p></li><li><p>Support installation, commissioning, and servicing of new machinery and equipment when required.</p></li></ul><p>Dairy Farm / Milking Equipment Exper</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Requirements</p><ul><li><p><strong>Bachelor's Degree in Mechanical Engineering</strong> or a related technical field.</p></li><li><p>Proven experience in <strong>mechanical maintenance and machinery</strong>.</p></li><li><p>Previous experience supervising or leading a team of technicians.</p></li><li><p>Strong knowledge of mechanical equipment troubleshooting and preventive maintenance.</p></li><li><p>Experience in industrial, agricultural, dairy, manufacturing, or similar environments is preferred.</p></li><li><p><strong>Dairy farm / milking parlour equipment experience is an advantage.</strong></p></li><li><p>Ability to read and understand mechanical drawings and technical manuals.</p></li><li><p>Strong leadership, communication, and problem-solving skills.</p></li><li><p>Ability to work in a fast-paced operational environment.</p></li><li><p>Willingness to work in a <strong>dairy farm environment</strong>.</p></li><li><p>Candidates must be physically fit and capable of handling maintenance-related activities.</p></li></ul>

<p><strong>Face-to-Face Interviews in India – October 2026</strong></p><p><strong>Required Nos.: 200+</strong></p><br><p>We are hiring experienced professionals for <strong>Offshore, Onshore and EPC Projects in the UAE</strong>.</p><br><p><strong>MANDATORY REQUIREMENT</strong></p><p><strong>All candidates must have relevant experience in Oil & Gas / EPC Projects.</strong></p><p>Candidates should have relevant experience in their respective discipline, particularly in <strong>Commissioning, Pre-Commissioning, Construction, Maintenance, Engineering or Operations</strong>.</p><p><strong>Employment:</strong> Company Payroll<br><strong>Location:</strong> UAE<br><strong>Interview:</strong> Face-to-Face in India<br><strong>Interview Month:</strong> October 2026<br><strong>Mobilization:</strong> Urgent / Immediate</p><br><p><strong>MISSION VISA – OFFSHORE PROJECT</strong></p><p><strong>Initially based in Yard, with offshore deployment as per project requirements.</strong></p><ul><li><p>Sr. Commissioning Engineer – Electrical</p></li><li><p>Commissioning Supervisor – Electrical</p></li><li><p>Sr. Commissioning Engineer – Instrument</p></li><li><p>Commissioning Supervisor – Instrument</p></li><li><p>Commissioning Supervisor – Mechanical</p></li><li><p>Sr. Commissioning Technician – Electrical</p></li><li><p>Sr. Commissioning Technician – Instrument</p></li><li><p>Sr. Commissioning Technician – Millwright</p></li><li><p>Preservation Technician / Helper</p></li></ul><p><strong>Visa:</strong> Mission Visa</p><p><strong>Note:</strong> Transfer to Residence Visa may be considered subject to performance and project requirements.</p><br><br><p><strong>OFFSHORE PROJECT – ENGINEERING & COMPLETIONS (RESIDENCE VISA)</strong></p><p><strong>Initially based in Yard.</strong></p><ul><li><p>Lead Instrument Engineer</p></li><li><p>Sr. Electrical Engineer</p></li><li><p>Sr. Instrument Engineer</p></li><li><p>Sr. Completions Engineer</p></li><li><p>Electrical Supervisor</p></li><li><p>CMS Operator</p></li><li><p>Punch List Coordinator</p></li><li><p>Vendor Coordinator</p><br></li></ul><p><strong>OFFSHORE PROJECT – COMMISSIONING</strong></p><p><strong>Initially based in Yard.</strong></p><ul><li><p>Commissioning Supervisor – Electrical</p></li><li><p>Sr. Commissioning Engineer – Instrument</p></li><li><p>Commissioning Supervisor – Instrument</p></li><li><p>Sr. Commissioning Technician – Electrical</p></li><li><p>Sr. Commissioning Technician – Instrument</p></li><li><p>Preservation Technician / Helper</p><br></li></ul><p><strong>ONSHORE PROJECT</strong></p><ul><li><p>Lead Instrument Engineer</p></li><li><p>Lead Mechanical Engineer</p></li><li><p>Sr. Instrument Engineer</p></li><li><p>Sr. Telecom Engineer</p></li><li><p>Electrical Supervisor</p></li><li><p>Instrument Supervisor</p></li><li><p>Mechanical Supervisor</p></li><li><p>Preservation Supervisor</p><br></li></ul><p><strong>ISLAND PROJECT</strong></p><p><strong>Preference will be given to candidates with Compressor Project or Island Project experience.</strong></p><ul><li><p>Commissioning Instrument Superintendent</p></li><li><p>Commissioning Electrical Power Distribution Supervisor</p></li><li><p>Maintenance Coordinator</p></li><li><p>Commissioning Engineer</p></li><li><p>Commissioning Automation Specialist</p></li><li><p>Field Operator</p></li><li><p>Commissioning Mechanical Supervisor</p></li><li><p>CMS Operator</p></li><li><p>Instrument Supervisor</p><br></li></ul><p><strong>CANDIDATE REQUIREMENTS</strong></p><ul><li><p><strong>Mandatory: Relevant Oil & Gas / EPC Project experience</strong></p></li><li><p>Relevant experience in the applied position / discipline</p></li><li><p>Experience in <strong>Commissioning / Pre-Commissioning / Construction / Maintenance / Engineering / Operations</strong>, as applicable</p></li><li><p>Candidates with <strong>Offshore, Onshore, Island or Compressor Project experience</strong> will be considered for relevant positions</p></li><li><p>Relevant technical qualifications required for Engineering positions</p></li><li><p>Hands-on project experience required for Technician, Supervisor and Operator positions</p></li><li><p>Candidates must be available for <strong>urgent / immediate mobilization</strong></p></li><li><p>Candidates should be willing to work in UAE project locations as required</p><br></li></ul><p><strong>INTERVIEW PROCESS</strong></p><p><strong>Face-to-Face Interview in India – October 2026</strong></p><p><strong>Desired Candidate Profile</strong></p><p>Only shortlisted candidates will be contacted with the <strong>interview location, date and reporting time</strong>.</p><p>IMPORTANT</p><ul><li><p>Urgent project requirements</p></li><li><p>Company Payroll</p></li><li><p>Immediate / early mobilization required</p></li><li><p>Mission Visa applicable to selected Offshore positions</p></li><li><p>Possible Residence Visa transfer subject to performance and project requirements</p></li><li><p>Only candidates meeting the relevant <strong>Oil & Gas / EPC experience requirements</strong> will be shortlisted</p></li></ul><p><strong>Interested candidates are requested to apply with an updated CV and clearly mention the position applied for.</strong></p>

<p><strong>Face-to-Face Interviews in India – October 2026</strong></p><p>We are hiring experienced professionals for <strong>Offshore, Onshore and Island Projects in the UAE</strong> on <strong>Company Payroll</strong>.</p><p>MANDATORY REQUIREMENT</p><p><strong>All candidates must have relevant experience in Oil & Gas / EPC Projects.</strong></p><p>Candidates should have relevant experience in their respective discipline, particularly in <strong>Commissioning, Pre-Commissioning, Construction, Maintenance, Engineering or Operations</strong>.</p><p><strong>Employment:</strong> Company Payroll<br><strong>Location:</strong> UAE<br><strong>Interview:</strong> Face-to-Face in India<br><strong>Interview Month:</strong> October 2026<br><strong>Mobilization:</strong> Urgent / Immediate</p><p>MISSION VISA – OFFSHORE PROJECT</p><p><strong>Initially based in Yard, with offshore deployment as per project requirements.</strong></p><ul><li><p>Sr. Commissioning Engineer – Electrical</p></li><li><p>Commissioning Supervisor – Electrical</p></li><li><p>Sr. Commissioning Engineer – Instrument</p></li><li><p>Commissioning Supervisor – Instrument</p></li><li><p>Commissioning Supervisor – Mechanical</p></li><li><p>Sr. Commissioning Technician – Electrical</p></li><li><p>Sr. Commissioning Technician – Instrument</p></li><li><p>Sr. Commissioning Technician – Millwright</p></li><li><p>Preservation Technician / Helper</p></li></ul><p><strong>Visa:</strong> Mission Visa</p><p><strong>Note:</strong> Transfer to Residence Visa may be considered subject to performance and project requirements.</p><p>OFFSHORE PROJECT – ENGINEERING & COMPLETIONS</p><p><strong>Initially based in Yard.</strong></p><ul><li><p>Lead Instrument Engineer</p></li><li><p>Sr. Electrical Engineer</p></li><li><p>Sr. Instrument Engineer</p></li><li><p>Sr. Completions Engineer</p></li><li><p>Electrical Supervisor</p></li><li><p>CMS Operator</p></li><li><p>Punch List Coordinator</p></li><li><p>Vendor Coordinator</p></li></ul><p>OFFSHORE PROJECT – COMMISSIONING</p><p><strong>Initially based in Yard.</strong></p><ul><li><p>Commissioning Supervisor – Electrical</p></li><li><p>Sr. Commissioning Engineer – Instrument</p></li><li><p>Commissioning Supervisor – Instrument</p></li><li><p>Sr. Commissioning Technician – Electrical</p></li><li><p>Sr. Commissioning Technician – Instrument</p></li><li><p>Preservation Technician / Helper</p></li></ul><p>ONSHORE PROJECT</p><ul><li><p>Lead Instrument Engineer</p></li><li><p>Lead Mechanical Engineer</p></li><li><p>Sr. Instrument Engineer</p></li><li><p>Sr. Telecom Engineer</p></li><li><p>Electrical Supervisor</p></li><li><p>Instrument Supervisor</p></li><li><p>Mechanical Supervisor</p></li><li><p>Preservation Supervisor</p></li></ul><p>ISLAND PROJECT</p><p><strong>Preference will be given to candidates with Compressor Project or Island Project experience.</strong></p><ul><li><p>Commissioning Instrument Superintendent</p></li><li><p>Commissioning Electrical Power Distribution Supervisor</p></li><li><p>Maintenance Coordinator</p></li><li><p>Commissioning Engineer</p></li><li><p>Commissioning Automation Specialist</p></li><li><p>Field Operator</p></li><li><p>Commissioning Mechanical Supervisor</p></li><li><p>CMS Operator</p></li><li><p>Instrument Supervisor</p></li></ul><p>CANDIDATE REQUIREMENTS</p><ul><li><p><strong>Mandatory: Relevant Oil & Gas / EPC Project experience</strong></p></li><li><p>Relevant experience in the applied position / discipline</p></li><li><p>Experience in <strong>Commissioning / Pre-Commissioning / Construction / Maintenance / Engineering / Operations</strong>, as applicable</p></li><li><p>Candidates with <strong>Offshore, Onshore, Island or Compressor Project experience</strong> will be considered for relevant positions</p></li><li><p>Relevant technical qualifications required for Engineering positions</p></li><li><p>Hands-on project experience required for Technician, Supervisor and Operator positions</p></li><li><p>Candidates must be available for <strong>urgent / immediate mobilization</strong></p></li><li><p>Candidates should be willing to work in UAE project locations as required</p></li></ul><p>INTERVIEW PROCESS</p><p><strong>Face-to-Face Interview in India – October 2026</strong></p><br><p><strong>Desired Candidate Profile</strong></p><p>Only shortlisted candidates will be contacted with the <strong>interview location, date and reporting time</strong>.</p><p>IMPORTANT</p><ul><li><p>Urgent project requirements</p></li><li><p>Company Payroll</p></li><li><p>Immediate / early mobilization required</p></li><li><p>Mission Visa applicable to selected Offshore positions</p></li><li><p>Possible Residence Visa transfer subject to performance and project requirements</p></li><li><p>Only candidates meeting the relevant <strong>Oil & Gas / EPC experience requirements</strong> will be shortlisted</p></li></ul><p><strong>Interested candidates are requested to apply with an updated CV and clearly mention the position applied for.</strong></p>

<ul><li><p>Supervise day-to-day electrical installation and construction activities at power project sites.</p></li><li><p>Execute electrical works in accordance with approved drawings, specifications, method statements, and project requirements.</p></li><li><p>Supervise installation of electrical equipment, cables, cable trays, conduits, panels, switchgear, transformers, earthing, lighting, and associated systems.</p></li><li><p>Coordinate electrical works related to substations, power distribution systems, control rooms, and other project infrastructure.</p></li><li><p>Read and interpret electrical drawings, single-line diagrams, cable schedules, layouts, and installation details.</p></li><li><p>Coordinate with Electrical Engineers, QA/QC, HSE, civil teams, subcontractors, and other disciplines to ensure smooth execution.</p></li><li><p>Monitor manpower, tools, equipment, and material requirements to achieve planned productivity and project milestones.</p></li><li><p>Ensure proper cable laying, glanding, termination, tagging, dressing, and testing as per approved procedures.</p></li><li><p>Supervise installation and connection of electrical panels, switchgear, transformers, busbars, and other electrical equipment.</p></li><li><p>Ensure proper installation of earthing and lightning protection systems in accordance with approved drawings and specifications.</p></li><li><p>Coordinate with testing and commissioning teams for pre-commissioning checks and electrical testing activities.</p></li><li><p>Monitor work progress against project schedules and report delays, constraints, and resource requirements to the Site/Project Engineer.</p></li><li><p>Coordinate inspections with the QA/QC team and ensure timely closure of inspection observations and non-conformities.</p></li><li><p>Ensure all electrical materials and installations comply with approved specifications and project quality requirements.</p></li><li><p>Supervise subcontractors and ensure compliance with approved work procedures, drawings, safety standards, and schedules.</p></li><li><p>Maintain proper records of daily activities, manpower, materials, equipment, inspections, testing, and work progress.</p></li><li><p>Ensure safe isolation, lockout/tagout, permit-to-work, and other electrical safety procedures are strictly followed.</p></li><li><p>Conduct or participate in toolbox talks and ensure workers use appropriate PPE and safety equipment.</p></li><li><p>Maintain good housekeeping and safe working conditions at the project site.</p></li><li><p>Assist in troubleshooting electrical installation issues and coordinate corrective actions with engineers.</p></li><li><p>Support snagging, rectification, testing, commissioning, and final handover activities.</p></li><li><p>Ensure completed electrical works are properly protected and maintained until project handover.</p></li><li><p>Perform other duties related to electrical construction and site supervision as assigned by the project management team.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Key Skills</p><ul><li><p>Strong knowledge of electrical construction and installation practices.</p></li><li><p>Hands-on experience with power distribution systems, substations, switchgear, transformers, cables, and electrical equipment.</p></li><li><p>Ability to read and interpret single-line diagrams, electrical layouts, wiring diagrams, and cable schedules.</p></li><li><p>Good understanding of cable installation, termination, testing, earthing, and electrical equipment installation.</p></li><li><p>Knowledge of electrical testing and pre-commissioning activities.</p></li><li><p>Strong manpower, subcontractor, and site coordination skills.</p></li><li><p>Good knowledge of QA/QC and HSE requirements for electrical works.</p></li><li><p>Ability to identify technical and site issues and coordinate timely corrective actions.</p></li><li><p>Strong communication, teamwork, and problem-solving skills.</p></li><li><p>Ability to work effectively under project deadlines and challenging site conditions.</p></li></ul><p>Qualifications & Experience</p><ul><li><p>Diploma, ITI, or relevant technical qualification in <strong>Electrical Engineering/Electrical Trade</strong>.</p></li><li><p><strong>5–10 years of relevant experience</strong> in electrical construction and site supervision, preferably in power, substation, utility, industrial, or EPC projects.</p></li><li><p>Experience in <strong>power substations, transmission/distribution, or electrical infrastructure projects</strong> is preferred.</p></li><li><p>UAE/GCC project experience will be an advantage.</p></li><li><p>Familiarity with UAE electrical standards, utility requirements, and site safety practices will be preferred.</p></li></ul></li></ul>