وظائف مهندس مواد

<p>• Ensure fabrication processes comply with relevant codes, specifications, and project requirement • Prepare QC Procedures, Inspection Test Plan (ITP) and maintain QAQC documentations • Prepare Visual Inspection Reports, Weld History Sheets, and other QC documents for piping fabrication. • Perform or supervise incoming material inspection, Fit-up and dimensional inspections, welding inspection, and pressure testing • Plan and schedule the NDT activities, verify NDT results, and ensure that defects are evaluated / repaired as per applicable codes • Develop and qualify WPS/PQR in accordance with ASME Sec IX, AGES Specifications & AWS D1.1 • Ensure inspection, measuring, and test equipment (IMTE) are regularly calibrated and traceable to national standards • Coordinate with Authorized Inspector (AI) and Client Inspector during hold and witness points for inspections • Identify and report non-conformances during fabrication or inspection & follow up on corrective and preventive actions (CAPA). • Support readiness for ASME and ISO Audits</p><p>Qualification required: • Bachelor Degree in Mechanical / Production Engineering • Minimum 4 years’ experience in a QA/QC role in ASME pressure vessels, piping and structural fabrication • Proficient in Microsoft Office • CSWIP 3.1 certificate is required • Strong knowledge in ASME, API and AWS codes • UAE Driving license(added advantage) • BGAS Grade Level II (added advantage) • Audit experience in ASME/ISO Audits (added advantage)</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Responsibilities</p><ul><li><p>Coordinate Mechanical, Electrical, and Plumbing (MEP) works with architectural, structural, and civil disciplines.</p></li><li><p>Review MEP shop drawings, builders’ work drawings, and coordination drawings before submission.</p></li><li><p>Identify and resolve clashes using coordination drawings and BIM models (Navisworks/Revit preferred).</p></li><li><p>Coordinate with subcontractors, consultants, and the main contractor to ensure smooth execution of MEP works.</p></li><li><p>Monitor site progress and ensure works are executed in accordance with approved drawings, specifications, and project schedules.</p></li><li><p>Attend coordination meetings and prepare follow-up action items.</p></li><li><p>Support material submittals, shop drawing submissions, RFIs, and technical clarifications.</p></li><li><p>Coordinate ceiling layouts, builders’ work openings, sleeves, and service routing.</p></li><li><p>Conduct site inspections to verify installation quality and compliance with project requirements.</p></li><li><p>Assist in preparing progress reports, tracking logs, and resolving technical issues.</p></li><li><p>Coordinate testing, commissioning, and authority inspections when required.</p></li><li><p>Ensure compliance with local authority regulations, health &amp; safety requirements, and project quality standards.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications</p><ul><li><p>Bachelor’s Degree or Diploma in Mechanical or Electrical Engineering.</p></li><li><p>Minimum 5 years of MEP coordination experience in Villas and High-rise building projects.</p></li><li><p>Good understanding of HVAC, Plumbing, Fire Fighting, Electrical, and ELV systems.</p></li><li><p>Proficiency in AutoCAD is mandatory; knowledge of Revit and Navisworks is preferred.</p></li><li><p>Familiarity with local authority requirements in the UAE (DEWA, Dubai Municipality, Dubai Civil Defence, and related authorities) is an advantage.</p></li><li><p>Strong communication, coordination, and problem‑solving skills.</p></li><li><p>Ability to work under pressure and meet project deadlines.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>· Manage construction projects from award to handover. · Review IFC drawings, specifications, and contract documents. · Prepare execution plans and construction methodology. · Coordinate with clients, consultants, subcontractors, and suppliers. · Monitor project schedule, cost, and quality targets. · Ensure work complies with project specifications and standards. · Track procurement and material delivery status. · Review shop drawings and technical submittals. · Conduct site inspections and resolve technical issues. · Manage manpower, equipment, and subcontractor performance. · Prepare daily, weekly, and monthly progress reports. · Attend coordination and progress meetings. · Monitor project risks and implement mitigation plans. · Support commercial team with variations and claims. · Ensure HSE compliance across project activities. · Coordinate testing, inspections, and handover documentation. · Close punch list items before project completion. · Maintain project records and document control. · Support project manager in achieving project objectives. · Drive continuous improvement and productivity.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>· Bachelor's Degree in Civil/Mechanical Engineering. · 4–8+ years of construction experience. · Steel Structure/PEB experience preferred. · Knowledge of AutoCAD, MS Project/Primavera P6. · Strong communication and leadership skills. · Valid UAE/KSA driving license preferred.</p></li></ul><br><p>Key Skills · Project Management · Construction Management · Structural Steel · PEB · Industrial Construction · AutoCAD · Primavera P6 · MS Project · MS Office · Planning · Scheduling · Team Leadership · Problem Solving · Communication · Quality Control · Safety Management · Reporting · Technical Coordination · Time Management · Documentation</p><br><p></p></section>

Petrofac is currently looking to recruit a Senior Engineer - Projects to be based in Sharjah, UAE.<br><br>What We Do<br><br>Petrofac is a leading international service provider to the energy industry, with a diverse client portfolio including many of the world’s leading energy companies.<br><br>We design, build, manage and maintain infrastructure for the energy industries. Our comprehensive and tailored service offering covers each stage of the project life cycle and a variety of commercial models, giving our clients the flexibility, they need.<br><br>Primary Duties<br><br>Operates as a part of team of Engineers in the coordination of resources in order to ensure that the<br><br>construction meets all contractual requirements in the most effective and efficient manner.<br><br>Review all contract documentation to assess feasibility of construction, identify any potential areas of<br><br>difficulty and highlight any variations required in the construction.<br><br> Participate in the review of the project planning process and create a schedule, which is in line with the<br><br>project requirements including establishing the sequence and duration of activities.<br><br>Active<br><br> Generate TDR (Technical Document Register) as a level 4 schedule and ensure that all relevant data<br><br>required for construction is contained in it. Monitor the issue of drawings as per the forecast dates<br><br>mentioned in the TDR, identify any discrepancies and bring it to the attention of the Lead Engineer.<br><br>Take corrective actions wherever required in the case of missing data from either the client or vendor.<br><br> Review Engineering drawings, documents and deliverables relating to area of functional responsibility<br><br>to assess constructability and consistency with contract requirements. Prepare and issue purchase<br><br>requests for materials and consumables.<br><br> Prepare project specific and other procedures to ensure comprehensive cover of all project activities as<br><br>per the contract requirements.<br><br> Coordinate all project related activities with other departments and sections to ensure effective<br><br>integration of tasks and minimize potential delays.<br><br> Participate in the finalization of work to be outsourced to sub-contractors including bid evaluation and<br><br>terms of contract.<br><br> Monitor the progress of the project as per the project plan and against the client’s requirements and<br><br>take corrective action whenever required.<br><br> Ensure the availability of necessary resources for the smooth execution of the project. Follow up with clients on approvals and instructions, attend client meetings and liaise with client on all<br><br>issues of the project deliverables.<br><br> Steer post award kick off meeting with vendor, Expedite, monitor and review vendor deliverables in line<br><br>with contractual requirements, execution schedule, Purchase Order requirements and terms &<br><br>conditions, ensure suborders of materials are in line with supplier’s engineering and manufacturing<br><br>schedule, and monitor respective deliveries. Resolve any potential operational issues that may impact<br><br>the deliveries, Monitor the recovery of delays and implementation of remedial actions. Identify Risks and<br><br>liaise with stakeholders to mitigate delays and cost impacts. Update order progress periodically.<br><br> Effectually nurture and maintain professional and healthy relationship with suppliers, conduct and monitor<br><br>objective supplier performance appraisal.<br><br> Carry out a routine check for field expediting requirements at supplier’s shop and plan expediting visits<br><br>accordingly after consultation with the Project Manager, Solicit supplier to maintain an inspection plan,<br><br>liaise with QA/QC and coordinate inspection visits. Review flash report and follow up on approvals by<br><br>QA/QC. Review inspection release note issued by QA/QC and Issue shipping release Note (SRN) to<br><br>supplier and logistic team to trigger the shipping process. Expedite suppliers’ shipping documents, liaise<br><br>with the shipping department for plan and timely movement of goods prior to readiness of consignment.<br><br>And monitoring until obtaining Material Receipt Voucher (MRV) from material controller on site.<br><br> Investigate causes of Excess, Shortage, and Damage (ESD) of supplies. Coordinate with the supplier<br><br>and the procurement department to resolve ESDs and safeguard a genuine material receipt report.<br><br> Advise supplier on invoicing instructions, Review ,verify and administer supplier invoices for payment<br><br>against progress milestones.<br><br>Minimum Requirements<br><br>An engineering degree with a minimum of 10 years of project management experience in the oil and gas sector.<br><br>Additional Information

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Title <br></span><p>Lead Engineer- Electrical</p><br> <br><br>Business <br><p>DUGAS</p><br> <br><br>Job Purpose <br><p>This role acts as the Technical Advisor and Subject Matter Expert on Electrical systems for the entire plant. The role ensures the application of engineering and technology skills, as well as offering expertise in the development and support of Electrical systems, processes and change requests for the Operations and Maintenance Departments.<br> To manage the design and execution of electrical engineering projects. Responsible for carrying out design simulation using design tools, for example ETAP/EDSA and developing a engineering packages on the basis of equipment load list and project requirements. Provide technical expertise to maintenance team for recurring problems in Electrical systems.</p><br> <br><br>Principal Accountabilities <br><p>Leads the development of plans and implements capital projects relating to electrical systems for process improvements and plant expansions Provides expertise in design, installation &amp; commissioning of Electrical systems.<br> Manages production of design documents relating to electrical engineering for: FEED, Detailed engineering and PMC packages.<br> Manages development of Electrical Design of substation i.e. FEED and detailed Engineering documents from PDP/Load List including Expertise over equipment Sizing calculations for Transformers ,<br> Switchgears , Circuit Breakers , UPS , Battery Chargers , Cables etc. Manages installation, pre-commissioning and commissioning activities of all HV/LV Electrical equipment, pumps, compressors etc in a multidisciplinary environment.<br> Offers expertise in Relay coordination and Protection calculations.<br> Offers expertise in the use of industry renowned Electrical design software (ETAP &amp; EDSA) and is conversant with industry codes &amp; standards(1EEE , IEC).<br> Offers expertise in design and execution of cathodic protection system, has capability to carry out the design calculation of DWGB , TRU of CP s stems.<br> For any project requirements/retrofit jobs/modification, prepares scope of work for an outside consultant/contractor, which for example covers: Technical standards/specification and datasheets Equipment sizing calculation, layouts etc.<br> Prepare purchase requisitions<br> Undertake technical evaluation, and finalization of consultant/contractor<br> Review the design documentation<br> Execution of the project/assignment in field i.e. installation and commissioning.<br> Prepare inspection plans, monitor inspection reports, identify when a project moves out of the norm and take appropriate remedial action Prepare method statements for work to be undertaken as required Coordinate with other concerned Departments to ensure the work on site is carried out as per required.<br> Supervise work of outside contractors/inhouse personnel as required. Ensure sufficient rescources to a project to ensure safe and on time execution of the project<br> To assist Maintenance Department, prepares detailed Overhauling and preventive maintenance scope of work for retrofit of equipment such as existing Transformers, HV and LV Switchgear.<br> Carrying out root cause analysis for re-curring electrical problems.<br> Familiary with reliability studies (Life cycle cost, TPM etc.). Familiar with latest state of art switchgear relays complying to IEC 61850, as well as obsolete Electromechnical relays (GEC make).<br> Specifications<br> Ensures compliance with DUGAS engineering requirements and standards, and other relavant IEEE/IEC standards.<br> Crisis Response<br> Responds to any plant breakdown, shutdown, or equipment failure at all times to ensure operational continuity.<br> Procurement<br> Orders material for Capex requirements. Expedites to ensure on time delivery.<br> &nbsp;Ensures ordered materials delivered to site are in accordance to the purchase order.<br> &nbsp;HSE<br> Operates in accordance with the requirements of the Safety, Health and Environment Policy.<br> Ensures DUGAS EHS policies/requirements are adhered to by DUGAS employees and Contractors undertaking projects.<br> Policies, Systems, Processes, and Procedures<br> Follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</p><br> <br><br>Additional Principal Accountabilities <br><br>Experience <br><p>University degree in Electrical Engineering<br> Minimum Experience:<br> 10-12 years of progressive experience preferably in the oil, gas or petrochemical industry.<br> Job-Specific Skills:<br> ETAP /EDSA<br> Design , Installation and commissioning<br> Project Management skills<br> Multi discipline exposure<br> Analytical skills.<br> Communication skills.<br> Coo eration skills</p><br> <br><br><br> </div>

Job Description<br><br>Job Overview: <br><br>Sr. Hook-up Engineer will typically be leading the respective discipline and supporting to Hook-up lead & Hook-up Manager in delivering construction & completion campaign during hook-up phase to execute overall project in successful and timely manner. The Sr. Hook Up Engineer solves complex problems and uses discipline-specific knowledge to improve their products or services.<br><br>Responsibilities<br><br>Key Tasks and Responsibilities:<br><br>Prepare & review Hook Up job cards as appropriate including pre-requisites and focusing sequential installations and relevant completion activities Develop the WBS for discipline scope Review construction work packs for respective discipline and ensure compliance to project requirement Prepare the hook-up schedule for discipline specific activities with efficient sequencing and synchronizing with other disciplines Participate in Pre-engineering survey, pre-construction survey & post installation survey Develop the constructability log & monitor the closing of actions on weekly basis Review design MTO’s for discipline Verify the MTO for offshore contingencies Review the material requisitions in compliance with project specifications prior to order Coordinate deliveries of same on site (yard/port/offshore/any other onshore locations) Review hook-up progress register and confirm understanding on progressing methodology Ensure progress register is in line with hook-up job cards for respective discipline Liaise with warehouse team to ensure project material receiving status & inspection clearance from Quality Liaise with fabrication team and take handover of fabricated project material and other ship lose material Liaise with Hook-up material team and verify the material bag/tag as per project requirement & as per hook-up Job cards Develop and implement detailed hook-up plans, , and strategies for onshore and offshore projects Provide technical guidance and support to junior engineers, ensuring their adherence to project timelines and quality standards Collaborate with project management and procurement teams to ensure timely availability of necessary resources, materials, and equipment Conduct risk assessments and implement mitigation measures to ensure safety during hook-up operations Ensure compliance with project requirements, industry codes, and standards, including the integration of environmental and sustainability aspects Ensure daily progress monitoring & reporting to planner Liaise with commissioning team and understand systems priorities, ensure construction is planned accordingly Ensure the support with commissioning team to expedite the vendor related activities Ensure scope familiarization with Hook-up superintendent & offshore construction crew prior to offshore mobilization Travel to offshore sites and to onshore yard facilities (dynamic environment) for co-ordination & resolution of disciplinary interfaces Participate in Toolbox Talks (TBT), Ensure Permit-To-Work (PTW) requirements are fulfilled before commencing each site activities and being compliant with the Company’s QHSES policies <br><br>Qualifications<br><br>Essential Qualifications and Education:<br><br>Bachelor's degree in Engineering (preferably in Mechanical, Electrical, or Chemical discipline) or equivalent industry experience10+ years’ experience in related offshore engineering fields Strong knowledge of industry best practices, standards (API, ISO), and regulations related to hook-up activities Proficiency in utilizing project management tools and software for planning, scheduling, and tracking hook-up and commissioning activities Excellent communication and leadership skills to effectively liaise with interdisciplinary teams, stakeholders, and clients Demonstrated ability to resolve technical challenges, implement innovative solutions, and ensure continuous improvement Proactive mindset with a strong focus on safety, quality, and delivering projects within defined timelines and budget constraints Competent in analyzing technical documents, drawings, and specifications to identify discrepancies and propose corrective actions Strong decision-making abilities under pressure, with the ability to prioritize tasks and allocate resources efficiently Professional certifications (such as PMI or equivalent) or training in project management would be an advantage<br><br>About Us<br><br>Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.<br><br>For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Strategy</strong></p><br><ul><li>Execute follow-ups on infrastructure project performance and Hatta initiatives; compile periodic reports with clear status and next steps.</li><li>Perform studies on infrastructure and Hatta development initiatives; submit to concerned parties per approved policies and procedures.</li><li>Support governance reviews of implementation teams’ outputs, including Hatta budget &nbsp; prioritization; draft deviation summaries and proposed actions.</li><li>Track challenges affecting strategic projects (including Hatta) and prepare technical reports with recommendations.</li><li>Compile development and measurement data for Hatta region indicators with concerned authorities; submit required reports.</li><li>Provide technical inputs on infrastructure files and priority dossiers supervised by the Director General and Chairman.</li><li>Support in supervising the coordination of Higher Committee for Hatta meeting materials—agendas, documents, summaries, speeches, and presentations.</li><li><strong>Operations</strong></li><li>Support tracking for infrastructure projects and Hatta initiatives; prepare initial status and exception reports and assist in follow ups of actions.</li><li>Ensure quality, compliance, and budget evaluation; escalate variances with recommended corrective actions.</li><li>Conduct field visits to project sites and issue periodic progress and work-front reports.</li><li>Prepare accurate reports and visual presentations for senior leadership, the Strategic Affairs Council, and the Executive Council, including Hatta topics.</li><li>Establish and operate a project-management system and performance dashboard for infrastructure projects, coordinating deployment and adoption with relevant units.</li><li><strong>Product/Process Improvement</strong></li><li>Perform studies and benchmarking on best practices and techniques in infrastructure project management to improve delivery performance.</li><li>Conduct initial review of the innovative initiatives, ideas, and projects that strengthen infrastructure and regional development outcomes.</li></ul> <p><strong>Job Qualifications &amp; Requirements</strong></p><br><p><strong>Education</strong></p><br><ul><li>Bachelor’s/ master’s degree in civil engineering</li></ul><p><strong>Experience</strong></p><br><ul><li>3+ years in case of master’s degree(5+ years in case of Bachelor’s degree)</li></ul><p><strong>Qualification</strong></p><br><p><strong>Technical Competencies</strong></p><br><ul><li>Core Engineering Principles</li><li>Infrastructure Construction &amp; Value Engineering</li><li>Project Management</li><li>Public Transport &amp; Logistics Knowledge</li><li>Strategic Project Tracking</li><li>Technical Reporting</li></ul> </div>

<p>Job Title: QC Engineer – Steel Structure</p><p><strong>Location:</strong> Riyadh, Saudi Arabia (KSA)<br><strong>Company:</strong> Steel Structure &amp; Fabrication Company<br><strong>Employment Type:</strong> Full-Time<br>Immediate Joiners Preferred</p><p>&nbsp;</p><p><strong>Job Summary</strong></p><p>We are seeking an experienced <strong>QC Engineer</strong> with a strong background in <strong>steel structure fabrication and erection projects</strong>.&nbsp;</p><p>The candidate will be responsible for implementing quality control procedures, conducting inspections, ensuring compliance with project specifications, and maintaining quality standards throughout fabrication and site installation activities.</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><ul><li>Implement and monitor Quality Control (QC) plans, procedures, and project quality requirements.</li><li>Conduct inspections of steel structure fabrication, welding, painting, and erection activities.</li><li>Review and verify material certificates, inspection reports, and test records.</li><li>Ensure compliance with project specifications, approved drawings, ITPs, and international standards.</li><li>Coordinate with clients, consultants, and third-party inspection agencies regarding quality-related matters.</li><li>Perform welding inspections and monitor welding activities as per approved WPS and applicable codes.</li><li>Prepare and maintain QA/QC documentation, NCRs, corrective actions, and inspection records.</li><li>Conduct incoming material inspections and verify traceability requirements.</li><li>Monitor painting and coating inspections, including DFT measurements and surface preparation checks.</li><li>Participate in internal audits and quality improvement initiatives.</li><li>Ensure all fabrication and erection works comply with safety and quality requirements.</li></ul><p>&nbsp;</p><p><strong>Requirements</strong></p><ul><li>Bachelor's Degree or Diploma in Mechanical Engineering, Civil Engineering, or related field.</li><li>Minimum <strong>5+ years of experience</strong> in steel structure fabrication and erection projects.</li><li>Strong knowledge of steel structure quality standards, welding inspections, and fabrication processes.</li><li>Familiarity with international codes and standards such as AWS, AISC, ISO, and ASTM.</li><li>Experience in preparing and reviewing QA/QC documentation and inspection reports.</li><li>CSWIP, AWS-CWI, BGAS, NACE, or equivalent certifications will be an added advantage.</li><li>Excellent communication and coordination skills.</li><li>Ability to work under pressure and meet project deadlines.</li></ul>

WE ARE HIRING | PLANNING ENGINEER – Substation ELECTRICAL ???????? Location: UAE – Site Based⚡ Industry: High Voltage Substation Projects???? Experience: 8–12 Years???? Qualification: Engineering Degree preferred<br>???? KEY SKILLS<br>• Expert-level proficiency in Primavera P6• High Voltage Substation project experience• Project Planning, Scheduling & Monitoring• Costing & Resource Planning• Critical Path & EOT Analysis• Baseline Schedule Preparation & Updates• Look-Ahead & Recovery Planning• Strong communication & coordination skills• MS Office – Excel, Word & Power Point<br>???? ROLES & RESPONSIBILITIES<br>• Prepare and maintain detailed project schedules using Primavera P6.• Develop baseline schedules for electrical packages and align them with project milestones.• Monitor project progress and regularly update schedules.• Perform critical path analysis and identify delays with corrective actions.• Conduct EOT (Extension of Time) analysis and prepare reports.• Plan and allocate manpower, materials and equipment effectively.• Coordinate with Engineering, Procurement, Construction and QA/QC teams.• Prepare look-ahead schedules, recovery plans and progress reports.• Maintain accurate project planning documentation and records.• Support the project team in achieving cost, time and quality objectives.<br>???? CANDIDATE REQUIREMENTS<br>✔ Strong experience in HV Substation Projects✔ Willingness to work at UAE project sites✔ Candidates from India or the Middle East may apply✔ Willingness to travel within UAE based on project requirements<br>???? APPLY NOW<br>Send CV: monisha.m@liveconnections.inWhats App: 9940315611

Auxilium is looking for an experienced Logistics Engineer with a strong background in the construction industry. The ideal candidate should have proven experience in site logistics, construction methodologies, safety standards, quality control, project coordination, and compliance requirements.<br>Key Responsibilities:Develop and implement site logistics plans based on project drawings, specifications, and construction sequences. Supervise Logistics Foremen in daily operations, including labour allocation, plant movement, and site setup. Coordinate with multidisciplinary teams to ensure logistics support is aligned with construction activities. Monitor and manage vertical and horizontal transport systems, including hoists, ramps, and access routes. Review and approve purchase requisitions for logistics-related materials and equipment. Ensure compliance with safety standards, environmental requirements, and third-party certifications. Oversee welfare areas, logistics zones, plant utilization, fuel consumption, and lifting equipment status. Support commercial teams with logistics data for cost control, contra charging, and reporting. Maintain logistics documentation, including lifting plans, MSRAs, DSTIs, temporary works documents, and toolbox talks. Lead logistics planning meetings and contribute to project progress reviews.<br>Requirements:Bachelor’s degree in Engineering, Construction Management, or a related field. LEEA Certified Appointed Person qualification is preferred. Minimum 5 years of experience in construction logistics or site engineering. Strong knowledge of site logistics planning, plant operations, and safety compliance. Experience managing teams and coordinating with multiple disciplines. Familiarity with LEED, Estidama, and environmental reporting.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Lead the design and engineering of complete electrical systems including power distribution, lighting, low voltage systems, emergency power (generators &amp; UPS), fire alarm, earthing, and lightning protection.</p></li><li><p>Prepare detailed electrical drawings, single-line diagrams, load calculations, cable schedules, and specifications using AutoCAD, Revit, Dialux, and ETAP.</p></li><li><p>Perform electrical load analysis, voltage drop calculations, short circuit studies, and coordination studies.</p></li><li><p>Coordinate with Mechanical, Plumbing, and other disciplines to ensure clash-free MEP designs (BIM coordination).</p></li><li><p>Review shop drawings, material submittals, and technical proposals from contractors/vendors.</p></li><li><p>Provide technical support during tendering, construction, and commissioning phases.</p></li><li><p>Ensure all designs comply with local and international standards (IEC, NEC, NFPA, local authority regulations, etc.).</p></li><li><p>Conduct site inspections, attend technical meetings with clients, consultants, and contractors.</p></li><li><p>Mentor junior engineers and guide the electrical design team on complex projects.</p></li><li><p>Value engineering and optimization of electrical systems for cost and energy efficiency.</p></li><li><p>Prepare BOQ, cost estimates, and technical reports.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Education: Bachelor’s Degree in Electrical Engineering (Master’s degree is a plus).</p></li><li><p>Experience: Minimum 8–12 years of relevant experience in MEP consulting, contracting, or design firms. At least 3–4 years in a senior/lead role.</p></li><li><p>Proven track record in large-scale projects (high-rise, hotels, hospitals, malls, data centers, or industrial facilities preferred).</p></li><li><p>Strong knowledge of MEP coordination and BIM workflows (Revit/Navisworks).</p></li><li><p>Experience with power system analysis software (ETAP, EPLAN, or similar).</p></li><li><p>In-depth knowledge of local codes and international standards.</p></li></ol><p></p></section>

Company Description South Westman General Contracting LLC is a premium construction firm specializing in high-end architectural projects across the UAE. The company partners with leading architects and consultants to execute complex designs and deliver complete turnkey builds. From initial groundbreaking through final handover, South Westman maintains strict quality standards with a focus on precision, discipline, and control. The firm is committed to excellence, discretion, and creating lasting value for clients. South Westman is trusted by clients who expect elevated service and superior project outcomes. Role Description The Project Engineer is a full-time, on-site role based in Abu Dhabi. This role is responsible for coordinating and overseeing project engineering activities, including reviewing designs, preparing technical documentation, and supporting project planning and scheduling. The Project Engineer collaborates with project managers, site teams, consultants, and subcontractors to ensure work is executed according to specifications, safety standards, and timelines. Daily tasks include monitoring construction progress, resolving technical issues, supporting quality control procedures, and preparing reports on project status. The role also involves assisting with procurement of materials, validating engineering solutions, and ensuring effective communication among stakeholders to keep projects on track. Qualifications Strong Project Engineering and Electrical Engineering skills, with the ability to interpret drawings, specifications, and technical standards. Demonstrated Project Management and Project Planning capabilities, including scheduling, resource coordination, and tracking progress against milestones. Effective Communication skills, with the ability to collaborate with multidisciplinary teams, coordinate with consultants, and report clearly to leadership. Bachelor’s degree in Electrical Engineering, Civil Engineering, or a related engineering discipline. Experience as a Project Engineer in construction or engineering projects, ideally within high-end or complex builds. Knowledge of relevant UAE building codes, safety regulations, and industry standards. Proficiency in project management and engineering software (e.g., MS Project, Auto CAD, or similar tools). Ability to work on-site in Abu Dhabi, manage multiple priorities, and maintain attention to detail in a fast-paced environment.

Company Description South Westman General Contracting LLC is a premium construction firm specializing in high-end architectural projects across the UAE. The company partners with leading architects and consultants to execute complex designs and deliver complete turnkey builds. From initial groundbreaking through final handover, South Westman maintains strict quality standards with a focus on precision, discipline, and control. The firm is committed to excellence, discretion, and creating lasting value for clients. South Westman is trusted by clients who expect elevated service and superior project outcomes. Role Description The Project Engineer is a full-time, on-site role based in Abu Dhabi. This role is responsible for coordinating and overseeing project engineering activities, including reviewing designs, preparing technical documentation, and supporting project planning and scheduling. The Project Engineer collaborates with project managers, site teams, consultants, and subcontractors to ensure work is executed according to specifications, safety standards, and timelines. Daily tasks include monitoring construction progress, resolving technical issues, supporting quality control procedures, and preparing reports on project status. The role also involves assisting with procurement of materials, validating engineering solutions, and ensuring effective communication among stakeholders to keep projects on track. Qualifications Strong Project Engineering and Electrical Engineering skills, with the ability to interpret drawings, specifications, and technical standards. Demonstrated Project Management and Project Planning capabilities, including scheduling, resource coordination, and tracking progress against milestones. Effective Communication skills, with the ability to collaborate with multidisciplinary teams, coordinate with consultants, and report clearly to leadership. Bachelor’s degree in Electrical Engineering, Civil Engineering, or a related engineering discipline. Experience as a Project Engineer in construction or engineering projects, ideally within high-end or complex builds. Knowledge of relevant UAE building codes, safety regulations, and industry standards. Proficiency in project management and engineering software (e.g., MS Project, Auto CAD, or similar tools). Ability to work on-site in Abu Dhabi, manage multiple priorities, and maintain attention to detail in a fast-paced environment.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Role Summary We are looking for a Naval Architect to join the Naval Architecture Department with a strong focus on weight control, weight measurements, and stability support across multiple yacht projects.<br> The role combines office-based engineering work with hands-on shipyard involvement.<br> The candidate will be responsible for maintaining accurate weight data, supporting stability and performance calculations, and developing a structured weight-control process from early design through production and delivery.<br> This position is suitable for someone who is practical, accurate, and willing to work closely with Engineering, Production, Procurement, Composite Department, and suppliers to obtain reliable technical information.<br> Key Responsibilities Prepare and maintain weight calculations, weight reports, and weight budgets for each project.<br> Track project weight development against the approved lightship weight budget.<br> Perform regular weight measurements during the production process.<br> Build and maintain a central database of equipment, materials, and verified component weights.<br> Collect and coordinate weight input from Engineering, Production, Procurement, Composite Department, and suppliers.<br> Verify production execution against drawings, plans, and composite construction details where relevant to weight control.<br> Identify deviations during production and assess their impact on vessel weight, stability, and performance.<br> Support stability calculations, performance predictions, and certification-related calculations.<br> Develop practical procedures, templates, and reporting tools for weight control across future projects.<br> Follow each project series and build number throughout production to maintain a clear overview of weight status and progress Work Environment This is a shipyard-based role involving both office work and regular visits to production areas.<br> The candidate will be expected to inspect construction progress, take measurements onboard, verify weights, and coordinate directly with production teams.<br> A hands-on approach and interest in the actual yacht-building process are important for this position.<br> Opportunity The company has multiple yacht series in design and production, giving the candidate strong exposure to real shipyard operations and hands-on yacht construction.<br> This role offers the opportunity to gain valuable experience across different project types, understand the full yacht-building process from design to delivery, and contribute directly to improving the company’s weight-control, stability, and production-monitoring systems.<br> What We Offer: · Competitive salary and benefits package · Opportunity to work on innovative and sustainable projects · Supportive and growth-oriented work environment · Exposure to international standards and advanced technologies Required Qualifications Bachelor’s degree in Naval Architecture, Marine Engineering, or a related field.<br> Good understanding of composite materials and yacht construction.<br> Experience with weight control, stability, or production follow-up is preferred.<br> Strong understanding of naval architecture principles, including stability, hydrodynamics, and basic structural analysis.<br> Required Skills Proficiency in CAD software such as AutoCAD, Rhino, SolidWorks, or similar.<br> Strong Excel skills for calculations, tracking sheets, databases, and reporting.<br> Experience with Maxsurf Stability or similar stability software.<br> Strong attention to detail and accuracy in calculations.<br> Clear communication skills with technical and production teams.<br> Practical mindset with the ability to work both independently and as part of a team.<br> Ability to follow up actively with departments and suppliers to obtain accurate information.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Description</strong><br>We are seeking an experienced QHSE Engineer to ensure compliance with Quality, Health, Safety, and Environmental (QHSE) standards across the organization. The role focuses on quality assurance, ISO management systems, audits, ESG reporting, risk management, and continuous improvement to support operational excellence.</p><p><br><strong>Key Responsibilities</strong></p><p><strong>Internal &amp; External Audits</strong></p><ul><li><p>Plan, coordinate, and conduct internal audits across all departments and branches.</p></li><li><p>Manage external certification, surveillance, and customer audits.</p></li><li><p>Coordinate audit schedules, findings, corrective actions, and closure.</p></li><li><p>Monitor audit KPIs and ensure timely completion of corrective actions.</p></li><li><p>Act as the company's focal point for certification bodies and regulatory audits.</p></li></ul><p><br></p><p><strong>ISO Management Systems</strong></p><ul><li><p>Ensure compliance with ISO 9001, ISO 14001, ISO 45001, and other applicable standards.</p></li><li><p>Develop, review, and update policies, procedures, work instructions, process maps, and controlled documents.</p></li><li><p>Monitor compliance across all company branches.</p><p><br></p><p><strong>Quality Assurance</strong></p></li><li><p>Perform quality inspections on finished products before dispatch.</p></li><li><p>Conduct incoming material inspections and report non-conformities.</p></li><li><p>Investigate customer complaints and quality issues using root cause analysis.</p></li><li><p>Identify process improvements to enhance product quality and manufacturing efficiency.</p><p><br></p><p><strong>ESG &amp; Sustainability</strong></p></li><li><p>Coordinate ESG data collection from all company branches and departments and prepare ESG reports.</p></li><li><p>Support the preparation of the company's Sustainability/ESG Report in accordance with GRI and other applicable reporting frameworks.</p></li><li><p>Track ESG KPIs and recommend improvement initiatives.</p><p><br></p><p><strong>Cross-Functional Coordination</strong></p></li><li><p>Work closely with Production, Operations, Supply Chain, Warehouse, Maintenance, Sales, and other departments to improve quality, safety, and environmental performance.</p></li><li><p>Liaise with certification bodies, regulatory authorities, customers, and third-party inspection agencies.</p></li><li><p>Deliver QHSE induction training, toolbox talks, and internal awareness sessions.</p></li><li><p>Risk Management and Training and Awareness</p></li><li><p>Conduct operational risk assessments. and investigate incidents, accidents, and near misses.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Experience</strong></p><ul><li><p>Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related Engineering discipline.</p></li><li><p><strong>5-8 years</strong> of QHSE experience in manufacturing, engineering, or industrial environments.</p></li><li><p>Experience with ISO certification systems, internal/external audits, quality assurance, risk management, KPI reporting, and continuous improvement.</p></li><li><p>Experience in ESG data collection and sustainability reporting is an advantage.<br></p></li></ul><p><strong>Skills</strong></p><ul><li><p>Strong knowledge of <strong>ISO 9001, ISO 14001, and ISO 45001</strong>.</p></li><li><p>Excellent auditing, report writing, analytical, root cause analysis, communication, and presentation skills.</p></li><li><p>Strong organizational and project management abilities.</p></li><li><p>Strong data analysis and reporting.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>� We're Hiring: Senior Estimation Engineer (Instrumentation) � � Location: Abu Dhabi, UAE � Industry: Oil &amp; Gas / EPC Projects Falcor Engineering &amp; Contracting Services is seeking an experienced Estimation Engineer (Instrumentation) to lead the preparation of technical and commercial bids for major Oil &amp; Gas EPC projects. The ideal candidate will have extensive experience in instrumentation estimation, tendering, cost analysis, subcontractor/vendor management, and bid preparation within the UAE Oil &amp; Gas sector. Key Responsibilities ✅ Lead and coordinate the preparation of technical and commercial bid submissions for Instrumentation and Control System projects. ✅ Review tender documents, specifications, drawings, and scope requirements to ensure bid completeness and compliance. ✅ Participate in pre-bid meetings, post-bid meetings, site surveys, and client clarification discussions. ✅ Prepare and verify detailed Material Take-Offs (MTOs) and quantity take-offs for instrumentation works. ✅ Coordinate with subcontractors and vendors, obtain quotations, perform technical and commercial evaluations, and prepare bid comparison sheets. ✅ Collaborate with Project, HSE, Quality, Planning, Procurement, Finance, and other departments to obtain required bid inputs. ✅ Develop detailed cost estimates, including direct and indirect costs, manpower, materials, subcontracting, and project execution requirements. ✅ Identify project risks and establish appropriate contingency allowances within the estimate. ✅ Ensure technical and commercial proposals fully comply with client specifications and tender requirements. ✅ Present bid summaries and cost estimates to management for review and approval. ✅ Provide support during post-award handover and project execution clarification stages. Alternatively, you may also connect with and reach out to Falcor's Lead HR, **Uzma Ehsan Al Haq**, on LinkedIn</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements � Bachelor's Degree in Instrumentation Engineering, Electronics Engineering, or a related discipline. � 12–15 years of total experience, including a minimum of 6–8 years in UAE Oil &amp; Gas projects. � Proven experience in Instrumentation estimation, tendering, bid preparation, and cost estimation for EPC projects. � Strong knowledge of instrumentation systems, field instruments, control systems, PLC, DCS, ESD, SCADA, and associated EPC project requirements. � Experience preparing MTOs, quantity take-offs, technical evaluations, and commercial bid submissions. � Strong understanding of subcontractor and vendor management processes. � Experience with ADNOC projects, standards, and tender requirements is highly preferred. � Excellent analytical, communication, negotiation, and presentation skills.</p><br><p>What We're Looking For ✔ Strong technical and commercial acumen. ✔ Proven ability to lead complex bid submissions and meet tight deadlines. ✔ Excellent stakeholder management and cross-functional coordination skills. ✔ Strong attention to detail and commitment to delivering accurate and competitive proposals.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Lead the development of comprehensive mechanical cost estimates for large-scale industrial projects, ensuring accuracy and competitiveness.</li><li>Analyze project specifications, drawings, and scope of work to identify all mechanical system requirements and potential cost drivers.</li><li>Develop detailed Bills of Quantities (BOQ) for mechanical equipment, piping, HVAC, and other related systems.</li><li>Source and evaluate quotations from vendors and subcontractors, negotiating favorable terms and pricing.</li><li>Perform quantity take-offs for mechanical components, materials, and labor with meticulous attention to detail.</li><li>Apply cost engineering principles to forecast project expenditures, including direct costs, indirect costs, and contingency.</li><li>Collaborate with project managers, engineers, and procurement teams to refine estimates and identify value engineering opportunities.</li><li>Prepare and present detailed estimation reports to senior management and clients, clearly articulating assumptions and methodologies.</li><li>Stay abreast of market trends, material costs, and labor rates to ensure estimates remain current and competitive.</li><li>Utilize specialized estimation software and tools to enhance efficiency and accuracy in the bidding process.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Mechanical Engineering or a related field.</li><li>Minimum of 7-10 years of progressive experience in mechanical estimating within the EPC or construction industry.</li><li>Proven track record of successfully estimating complex mechanical systems for diverse industrial sectors (e.g., oil &amp; gas, power, petrochemical).</li><li>Proficiency in estimation software such as Aspen Icarus, H2/Cost, or similar platforms.</li><li>Strong understanding of mechanical engineering principles, including P&amp;IDs, equipment specifications, and construction methods.</li><li>Excellent analytical and problem-solving skills with a keen eye for detail.</li><li>Ability to interpret complex engineering drawings, technical specifications, and contract documents.</li><li>Exceptional communication and negotiation skills, with the ability to present findings clearly to stakeholders.</li><li>P.Eng. or relevant professional certifications are highly advantageous.</li><li>Fluency in English is essential; knowledge of Arabic is a plus.</li></ul><p></p></section>

Job Purpose<br><br>To plan and coordinate of maintenance activities for components and other workshop units. The Workshop Planning Engineer is responsible for creating detailed schedules, assigning daily work targets, tracking progress, and preparing performance reports, ensuring optimal use of manpower and resources within the workshop.<br><br>Key Result Responsibilities<br><br>Receive work scopes and shop visit requests from CAMO or Component Planning teams. Prepare detailed schedules for shop visits Plan, allocate, and communicate daily work assignments and targets to workshop technicians. Monitor progress against plan and adjust schedules as necessary to meet turnaround time (TAT) commitments. Coordinate with Quality, Logistics, Tooling, and Stores to ensure timely availability of required parts, tools, and documentation. Track work-in-progress (WIP) and maintain real-time updates in AMOS,Escalate issues that may cause delays (e.g., material shortages, findings, manpower constraints). Prepare post-visit reports analyzing TAT, labor hours, delays, non-routines, and findings. Contribute to continuous improvement initiatives focused on workshop efficiency, scheduling, and resource utilization. Participate in daily planning meetings and cross-department coordination with stakeholders. Planning of materials, consumables and tooling for workshops. Management of AMOS-CROM & CMP projects.<br><br>People Management<br><br>Provides direction, coaching and guidance to team members for their career and professional development. Creates a conducive working environment to build and sustain a performance driven, engaged, and committed team. Ensures people management responsibilities are handled effectively in line with company procedures.<br><br>Qualifications (Academic, Training, Languages)<br><br>Bachelor’s degree in Aeronautical / Mechanical Engineering or a related technical discipline. Proficient in building and managing Gantt charts and detailed schedules. Clear and effective communicator, both written and verbal, across departments and levels. Familiar with airline or MRO operations, maintenance procedures, and technical documentation. Proficient in MS Office, especially Excel and Power Point for reporting. Understanding of workshop processes and turnaround planning. Awareness of human factors in aircraft maintenance activities.<br><br>Work Experience<br><br>4+ years of experience in workshop maintenance planning. Experience using project planning tools (e.g., MS Project, Primavera) and maintenance software such as AMOS TRAX (AMOS Preferred).

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job STRUCTURAL ENGINEER <p>We are seeking a skilled Structural Engineer specializing in Onshore Oil &amp; Gas Projects with strong experience in FEED (Front End Engineering Design) and Detailed Engineering phases. The ideal candidate will have hands-on experience working on ADNOC Onshore projects and possess a strong understanding of structural engineering principles, international codes, standards, and engineering best practices.</p><br> <p><strong>Job Responsibilities:</strong></p><br> <ul> <li>Execute structural engineering activities during FEED and Detailed Design phases for onshore oil &amp; gas facilities.</li> <li>Perform structural analysis and design of steel and reinforced concrete structures in compliance with ADNOC and international standards.</li> <li>Prepare and review structural calculations, design reports, specifications, material requisitions, and engineering deliverables.</li> <li>Design pipe racks, equipment support structures, compressor and pump foundations, substations, control buildings, platforms, and miscellaneous steel structures.</li> <li>Perform foundation design and analysis for static and rotating equipment, storage tanks, vessels, and pipe support systems.</li> <li>Conduct structural adequacy checks and assessments for brownfield modifications and facility upgrades.</li> <li>Perform steel connection design, including bolted and welded connections, base plates, and anchor bolt systems.</li> <li>Develop structural layouts, GA drawings, reinforcement details, and construction support documents.</li> <li>Coordinate with Piping, Piping Stress, Mechanical, Civil, Electrical, and Instrumentation disciplines to ensure integrated design development.</li> <li>Review vendor drawings, calculations, and technical documentation related to structural systems and equipment foundations.</li> <li>Participate in design reviews, model reviews, constructability assessments, and interdisciplinary coordination meetings.</li> <li>Support construction, procurement, and commissioning teams by resolving technical queries and providing engineering solutions.</li> </ul> <p><strong>Key Qualifications:</strong></p><br> <ul> <li>Bachelor's degree in civil engineering with specialization in Structural Engineering or related discipline.</li> <li>8–12 years of experience in Oil &amp; Gas engineering with a focus on Structural Design and Analysis.</li> <li>Proven experience in FEED and Detailed Design phases of Onshore Oil &amp; Gas projects.</li> <li>Mandatory experience working on ADNOC Onshore projects.</li> <li>Strong experience in steel structures, reinforced concrete structures, equipment foundations, pipe racks, and industrial buildings.</li> <li>Experience in structural adequacy checks, brownfield modifications, and steel connection design.</li> <li>Sound knowledge of AISC, ASCE, ACI, API, ASTM, ISO, and ADNOC engineering standards.</li> <li>Proficiency in STAAD. Pro, ETABS, SAP2000, SAFE, Foundation 3D, or equivalent structural analysis software.</li> <li>Experience coordinating with Piping Stress, Mechanical, Civil, and other engineering disciplines.</li> <li>Strong technical, communication, and coordination skills.</li> </ul><p>VERTICAL</p><br><p>ENGINEERING</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li> <p><span>Provide technical expertise in all Process design</span></p><br></li> </ul><br> <ul> <li> <p><span>Ensure design and engineering compliance with relevant codes and ADNOC standards</span></p><br></li> </ul><br> <ul> <li> <p><span>Coordinate, Monitor and handle Process design and engineering with EPC Contractor as per project expectation and complete the same within the time frame</span></p><br></li> </ul><br> <ul> <li> <p><span>Work with other discipline engineers within IPMT, EPC Contractor, ADNOC Engineering / Operation / Site Interface to resolve technical issues and ensure quality Discipline Engineering execution and integrity etc.&nbsp;&nbsp;</span></p><br></li> </ul><br> <ul> <li> <p><span>Perform regular and timely technical reviews of Process Engineering deliverables developed by engineering consultants/contractors, ensuring design quality in compliance with relevant codes, standards, and best practices.</span></p><br></li> </ul><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>