وظائف مهندس صيانة في الإمارات

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Perform preventive and corrective maintenance of HVAC systems.</li><li>Have adequate painting skills for indoor and outdoor painting.</li><li>Supervise and guide junior technicians and subcontractors on-site.</li><li>Conduct inspections and testing of systems and equipment to ensure compliance with industry standards.</li><li>Diagnose malfunctions and perform repairs on HVAC systems.</li><li>Coordinate with project engineers and site managers to ensure timely execution of work.</li><li>Maintain proper documentation of service records, maintenance logs and reports.</li><li>Ensure all work is completed in accordance with safety regulations and quality standards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Strong knowledge of HVAC systems.</p></li><li><p>Minimum 5 years of experience in painting/HVAC systems in UAE.</p></li><li><p>Excellent problem-solving skills and attention to detail.</p></li><li><p>Strong communication and leadership abilities.</p></li><li><p>Driver’s License</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>MAIN OBJECTIVE OF ROLE</strong><br>To ensure continued airworthiness and provide technical support to maintain the reliability, safety, and performance of the aircraft in compliance with regulatory and organizational requirements. <br><strong>KEY RESPONSIBILITIES</strong><br><ul><li>Provides continued airworthiness and technical support across airframe systems, avionics, structures, interiors, engines, and components to address operational engineering issues.</li><li>Reviews and actions emergency Airworthiness Directives (ADs), Service Bulletins (SBs), fleetwide inspections, and away-from-base Aircraft on Ground (AOG) events to ensure airworthiness compliance.</li><li>Monitors the Engineering Daily Technical Status to assess maintenance operations, technical delays, deferred defects, and operational restrictions affecting the flydubai fleet.</li><li>Evaluates and tracks aircraft defects using Aircraft Health Monitoring (AHM) and AMOS systems to ensure proper troubleshooting, rectification, and follow-up on repetitive defects.</li><li>Interprets technical documentation including ADs, SBs, Component Service Bulletins (CSBs), and other regulatory or manufacturer publications to determine required actions.</li><li>Liaises with internal departments and Original Equipment Manufacturers (OEMs) to resolve engineering issues and ensure the availability of approved data for aircraft release.</li><li>Liaises with internal departments and Original Equipment Manufacturers (OEMs) to resolve engineering issues and ensure the availability of approved data for aircraft release.</li><li>Provides technical input and assistance during investigations arising from Air Safety Reports (ASRs), Mandatory Occurrence Reports (MORs), and similar events.</li><li>Assists in developing and maintaining processes, procedures, and documentation that support the continued technical operation and regulatory compliance of the fleet.</li></ul> <br><strong>QUALIFICATIONS</strong><br><ul><li>Bachelor's Degree (3+ years)</li><li>Engineering or ICAO Type 2 Aircraft Maintenance Engineers License (B2 or B1) or Engineering Apprenticeship</li><li>Fluent in English</li><li>Years with qualifications: 5 - 7 years</li></ul> <br><strong>COMPETENCIES</strong><br><ul><li>Customer Focus</li><li>Teamwork</li><li>Effective Communication</li><li>Personal Accountability &amp; Commitment to achieve</li><li>Resilience &amp; Flexibility (Can do attitude)</li></ul> <br><strong>ISR REQUIREMENTS</strong><br>Reads and complies with the ISR policies of the Company and diligently reports any weakness or incidents to the respective Line Manager or the Information Security team. Completes all required ISR awareness sessions and follows associated guidelines in the day-to-day business operations.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Purpose</b> <br><p><span>Perform new and maintenance painting work in residential &amp; commercial buildings and to ensure work is in accordance with all standards of building codes and safety.</span></p><br><br><b>Key Result Responsibilities</b> <br><p>Operational Excellence</p><br><br><ul><li>Performs any duties and responsibilities that are within the scope of employment, as assigned by the supervisor/Engineer In-Charge, coordinates with co-workers for the project.</li><li>Reviews assigned tasks with the Engineer-in-Charge to gain full understanding of the work, priorities, requirements and cautions, prior to starting work.</li><li>Prepares or works from blue prints, plans, drawings and specifications in accordance with the building codes, safety and approved trade practices.</li><li>Performs scheduled work ensuring that the required tools are obtained, used and returned per issued instructions.</li><li>Inspects surfaces and identifies defects and the need for adjustment or repair to ensure safety and compliance with codes.</li><li>Paints the interior and exterior of structures, buildings and other surfaces taking into consideration both practical and aesthetic benefits.</li><li>Applies varnish and other finishes where needed.</li><li>Carries on-site preparations such as building scaffolding and covering fixtures. &nbsp;</li><li>Prepares walls and other surfaces for painting by scraping, using sandpaper, removing old paint, and filling cracks and holes.</li><li>Mixes paint and other material to prepare the right colour or texture.</li><li>Arranges for material from approved suppliers for painting work.</li><li>Regularly reports the status of assigned tasks to the Engineer-in-Charge and alerts him or her to any problems with the execution of the work.</li><li>Demonstrates high level of consideration to housekeeping standards in all tasks performed.</li></ul><p>Safety</p><br><br><ul><li>Manages the safety of own assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.</li><li>Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of protective equipment.</li><li>Pays attention to human factors aspects of maintenance, ensuring that work interruption procedures are followed, and that adequate access and lighting is used for maintenance and inspections.</li><li>Uses &amp; wears necessary equipment for safety like safety shoes, helmet, gloves, protection glass, etc.&nbsp;</li></ul><p>Reputation and Teamwork</p><br><br><ul><li>Internal Customer Service: provides helpful information and support to own team and to other department personnel involved with managing scheduled construction/maintenance work.</li><li>Presents a positive and competent image of technical professionalism to other companies’ personnel and company customers.</li></ul><p>Cost Awareness</p><br><br><ul><li>Maintains positive awareness to the cost of maintenance including use of time and materials.</li><li>Minimizes unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.</li></ul><br><b>Qualifications (Academic, training, languages)</b> <br><ul><li><span>Candidates must possess relevant qualification required for this position.&nbsp;</span></li><li><span>Demonstrates a positive attitude all times.</span></li><li><span>Well organized, capable of arranging work assignments as needed.</span></li><li><span>Manual dexterity with excellent balance to work on scaffolding, ladders etc.</span></li><li><span>Dynamic and physically fit for the job, requires frequent movement and physical effort.</span></li><li><span>Good basic mathematical skills.</span></li><li><span>Fair English Language (written and spoken).&nbsp;</span></li><li><span>Very good knowledge of painting material and how to select, mix and apply them.</span></li><li><span>Solid knowledge of commercial and/or construction painting techniques.</span></li><li><span>Aptitude in using appropriate tools (brushes, caulking guns etc.)</span></li><li><span>Ability to follow verbal and written instructions and express updates accordingly.</span></li><li><span>Ability to understand assignments and perform tasks according to priorities and logical order.</span></li><li><span>Cooperative team players, demonstrate ability to work in a multicultural environment.</span></li><li><span>Willing to work on shift pattern (24/7) and long working hours.</span></li><li><span>Multi-task oriented with high detail orientation.</span></li><li><span>Reliable, self-motivated displays energy and enthusiasm.</span></li></ul><br><b>Work Experience</b> <br><ul><li>With a minimum of 1-2 of years of relevant technical experience in the related field in any engineering /construction / maintenance company is a must.</li></ul><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.Accepts direction from his supervisor verbally or in writing.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications:Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualificationMinimum Experience:Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)Craft /Trade certificate holders: 8 years’ experience in mechanical maintenanceHands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhaulsSkills:Familiar with all mechanical maintenance toolsKnowledge of PCs, Computer literacy is essentialConversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standardExcellent interpersonal skills and assertivenessTeam work (including shift work is also essential)Self-motivation &amp; dedicationWork in a Multi-Cultural environment</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>2nd W/K Electrical Engineer for Dredger.</p><br><br><p>DEVELOP YOUR CAREER WITH INDUSTRY LEADERS</p><br><p>NMDC Group is always looking for talented individuals to join our team. We know that our people are fundamental to our success as a business, which is why we support their career development and personal wellbeing in every way we can.</p><br><p>NMDC Group offers an environment where every employee can thrive and reach their professional potential. Nothing is more important to us than ensuring every employee feels valued and respected in their roles, and able to progress in their career through training, mentorship, and educational opportunities.</p><br><p>With a wide range of attractive employee benefits and competitive salaries, we have created a workplace defined by its culture, and made by its people. If you have a passion for EPC and marine construction and want to work on some of the region’s most exciting projects, find your next challenge with us.</p><br><br>Responsibilities:<br><ul><li>Maintain, troubleshoot, and repair all electrical, electronic, automation, and instrumentation systems onboard the Cutter Suction Dredger.</li><li>Ensure the safe and reliable operation of power generation, power distribution, dredging electrical systems, propulsion auxiliaries, and vessel automation.</li><li>Carry out planned preventive maintenance and corrective repairs in accordance with the Planned Maintenance System (PMS).</li><li>Diagnose and rectify faults on PLCs, VFDs, MCCs, switchboards, generators, motors, sensors, alarms, and control systems.</li><li>Maintain electrical systems associated with cutter drives, dredge pumps, jet pumps, spud systems, winches, hydraulic controls, and auxiliary machinery.</li><li>Monitor electrical load distribution, insulation integrity, protection systems, and the overall health of electrical equipment to ensure uninterrupted dredging operations.</li><li>Maintain emergency electrical systems, UPS units, batteries, navigation lights, communication equipment, and safety alarms.</li><li>Keep accurate maintenance records, electrical drawings, calibration records, and spare parts inventory for all electrical equipment.</li><li>Ensure compliance with ISM Code, Class, Flag State requirements, company procedures, and applicable electrical safety regulations.</li><li>Apply Permit-to-Work (PTW), Lock-Out/Tag-Out (LOTO), and other electrical isolation procedures before carrying out maintenance activities.</li><li>Coordinate closely with the Chief Engineer, Dredge Master, and deck and engine departments to support continuous and efficient dredging operations.</li><li>Supervise and provide technical guidance to Electrical Ratings, trainees, and contractors during maintenance and repair activities.</li><li>Participate in emergency drills and provide technical support during breakdowns and emergency situations.</li><li>Identify recurring equipment issues, recommend technical improvements, and contribute to enhancing vessel reliability and operational performance.</li><li>Perform any other duties assigned by the Chief Engineer to support the safe and efficient operation of the vessel.</li></ul><br>Qualifications:<br><p>Bachelor's degree in electrical/Electronics &amp; Automation Engineering.</p><br><p>5-10 years' experience on Dredger or in heavy industries with automation.</p><br><p>Basic STCW training certification with medical fitness certificate.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Diagnose and repair complex electromechanical equipment failures, minimizing downtime and ensuring operational efficiency.</li><li>Perform preventative maintenance on machinery, including lubrication, calibration, and component replacement, to extend equipment lifespan.</li><li>Interpret technical drawings, schematics, and blueprints to accurately assemble, install, and troubleshoot equipment.</li><li>Utilize diagnostic tools and testing equipment, such as multimeters and oscilloscopes, to identify electrical and mechanical faults.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>4-5 yrs in heavy equipment’s </p></li><li><p>Ability to Diagnose and resolve hydraulic system complaints </p></li><li><p>Ability to use diagnostic tool and solve complex electrical and electronic issues in heavy equipment</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Purpose<p><span>Join our <strong>Engine Maintenance Centre</strong> a cutting-edge maintenance facility where we deliver exceptional Maintenance Repair and Overhaul MRO services for the engines of Emirates fleets.</span></p><br><br><br><br><p><span>As a <strong>Technical Shop Support Engineer II, </strong>you will provide technical support for the Emirates engine fleet and ensure that the Shop Visits are achieved at the highest level of standard as per Original Equipment Manufacturer OEM recommendations and Airworthiness requirements meeting the company requirements in terms of Quality Turn Around Time and Cost optimization.</span></p><br><br><p><span><strong>In this role you will:</strong></span></p><br><br><ul><li>Technically review the Customer Airline work scope and associated set of documents Provide feedback for possible changes Customer Repair Specs shall be used to verify the correctness of work scope levels Crosscheck verification of customer reports for system upload.</li><li>Prepare and / or approve EEMC internal work scope that includes all the customer airline requirements including Service Bulletins, Airworthiness Directives, Aircraft Maintenance Programme tasks etc and translate the work to be performed on the engine from customer work scope to Job Instructions.</li><li>Prepare and / or approve all the Task cards in EEMC ERP system IFS solution so Planning and the shop floor production can review and prepare the work.</li><li>Supervise the supply of the task cards to the shop floor print format or e-Task card Perform Supervise Task cards customisation as necessary depending on the engine activities and feedback from Production team.</li><li>Provide continuous Technical Support to the shop floor for any enquiry related to the disassembly inspection repairs tooling capability assembly and testing of the engine Support the New Repair process or the introduction of new modification.</li><li>Coordinate with Engines Manufacturer to request assistance for troubleshooting clarification on Manuals and any sort of technical support beyond EEMC scope of responsibilities.</li><li>Accountable for the compliance of all the technical instructions provided to the shop floor as per regulatory requirements Maintenance Organisation Exposition Engineering Procedure Manual Standard Operating Procedures etc.</li><li>Perform Supervise the review of Engine Manual revisions and Service Bulletins for Routine and Repair Task Card amendments.</li><li>Provide support for the reconciliation of Shop Visit Report and Invoices on monthly basis with finance department.</li><li>Coordinate the release of engines after test and provide all the redelivery documents such as but not limited to Life Limited Part status Service Bulletins and Airworthiness Directives Reports, AMP tasks list, Assembly Status Report, Carry Forward Sheet Ship Loose, Ship Short final release certificate and organise upload on the documents to the designated portals.</li></ul>Qualification<p><strong><span>To be considered for this role you must meet the below requirements:</span></strong></p><br><br><ul><li>Bachelor's degree (12+3) in Aeronautical, Avionics, Mechanical or Electrical Engineering field and / or holder of Aircraft Maintenance Engineering Licence for 5 years.</li><li>7+ years of overall experience of which a minimum of 5 years in Technical Support or equivalent.</li><li>Thorough knowledge of latest technical developments and industry trends on respective Engine Systems Ability to analyse and synthesise the technical information for implementation in cost effective ways. </li><li>Excellent drafting report writing skills. </li><li>Demonstrable experience in managing complex tasks and decision making in a fast-paced environment. </li><li>Should have experience in Engine Work-Scoping and Job Instructions Authoring.</li></ul><br>Salary &amp; benefits<p>Join us in a management role and enjoy an attractive tax-free salary. On top of our generous travel benefits, including discounted flights and hotel stays around the world, this managerial role also has an excellent leave and healthcare package. That’s on top of transport benefits, life insurance and more. Find out what it’s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers</p><br><br><br> </div>

<p>Senior Facility Engineer – Duties and Responsibilities (Air Base)</p><ol><li><p>Facility Operations & Maintenance</p></li></ol><p>Manage the day-to-day operation and maintenance of all air base facilities.</p><p>Ensure all MEP (Mechanical, Electrical, and Plumbing) systems are functioning efficiently.</p><p>Supervise preventive, corrective, and predictive maintenance activities.</p><p>Monitor critical systems such as HVAC, generators, UPS, transformers, air compressors, water systems, and fuel systems.</p><p>Ensure uninterrupted operation of mission-critical facilities.</p><ol><li><p>Team Management</p></li></ol><p>Lead and supervise Facility Engineers, Supervisors, Technicians, and subcontractors.</p><p>Allocate manpower according to operational priorities.</p><p>Conduct daily toolbox talks and safety briefings.</p><p>Evaluate staff performance and identify training requirements.</p><ol><li><p>Planned Preventive Maintenance (PPM)</p></li></ol><p>Develop and implement annual maintenance plans.</p><p>Ensure all PPM activities are completed as per schedule.</p><p>Review maintenance reports and verify work completion.</p><p>Minimize equipment downtime through effective maintenance planning.</p><ol><li><p>Corrective Maintenance</p></li></ol><p>Respond immediately to emergency maintenance requests.</p><p>Investigate equipment failures and identify root causes.</p><p>Coordinate repairs to minimize operational disruptions.</p><p>Ensure all maintenance activities comply with OEM recommendations.</p><ol><li><p>Health, Safety & Environment (HSE)</p></li></ol><p>Ensure compliance with HSE regulations and air base safety standards.</p><p>Conduct regular safety inspections and risk assessments.</p><p>Monitor Permit-to-Work (PTW) systems.</p><p>Participate in emergency response drills.</p><p>Ensure proper use of PPE by all personnel.</p><ol><li><p>Asset Management</p></li></ol><p>Maintain an accurate asset register.</p><p>Monitor equipment lifecycle and recommend replacement of obsolete assets.</p><p>Track warranty periods and service contracts.</p><p>Ensure calibration of testing equipment.</p><ol><li><p>Contract & Vendor Management</p></li></ol><p>Monitor subcontractor performance.</p><p>Review maintenance contracts and service agreements.</p><p>Verify completed work before approving invoices.</p><p>Coordinate with suppliers for spare parts and equipment.</p><ol><li><p>Budget & Cost Control</p></li></ol><p>Prepare maintenance budgets.</p><p>Monitor operational expenses.</p><p>Recommend cost-saving initiatives without compromising reliability.</p><p>Control spare parts inventory.</p><ol><li><p>Client Coordination</p></li></ol><p>Serve as the primary technical point of contact with the client.</p><p>Attend coordination meetings.</p><p>Provide technical advice and engineering solutions.</p><p>Ensure client complaints are resolved promptly.</p><ol><li><p>Reporting</p></li></ol><p>Prepare daily, weekly, and monthly maintenance reports.</p><p>Monitor KPIs and SLAs.</p><p>Submit incident and root cause analysis reports.</p><p>Maintain maintenance records and documentation.</p><ol><li><p>Compliance</p></li></ol><p>Ensure compliance with:</p><p>UAE Civil Defence requirements</p><p>Local authority regulations</p><p>Environmental regulations</p><p>OEM standards</p><p>Military/Air Base security procedures</p><p>ISO 9001, ISO 14001, and ISO 45001 requirements (where applicable)</p><ol><li><p>Engineering Support</p></li></ol><p>Review engineering drawings and technical specifications.</p><p>Evaluate modification requests.</p><p>Support new facility construction and renovation projects.</p><p>Conduct site inspections and technical assessments.</p><ol><li><p>Emergency Response</p></li></ol><p>Act as the engineering focal point during emergencies.</p><p>Coordinate restoration of critical services.</p><p>Ensure backup power systems remain operational.</p><p>Participate in business continuity planning.</p><ol><li><p>Documentation</p></li></ol><p>Maintain:</p><p>As-built drawings</p><p>O&M manuals</p><p>Equipment history records</p><p>Asset registers</p><p>Calibration certificates</p><p>Test reports</p><p>Inspection records</p><p>Key Performance Indicators (KPIs)</p><p>PPM completion 100%</p><p>Equipment availability 99.5%</p><p>SLA compliance 100%</p><p>Emergency response within contractual limits</p><p>Zero Lost Time Incidents (LTI)</p><p>High client satisfaction</p><p>Timely closure of corrective actions</p><p>Effective budget control and reduced maintenance costs</p><p>Typical Systems Under the Senior Facility Engineer</p><p>HVAC and Chillers</p><p>Split & Package AC Units</p><p>Electrical Distribution (HV/LV)</p><p>Generators and UPS</p><p>Lighting Systems</p><p>Fire Alarm & Fire Fighting Systems-Support only</p><p>Plumbing & Drainage</p><p>Water Storage & Pumping Systems</p><p>Building Management System (BMS)</p><p>Compressed Air Systems</p><p>Fuel Storage & Distribution</p><p>Hangars and Aircraft Support Facilities</p><p>Roads, Pavements, and External Infrastructure</p><p><strong>Desired Candidate Profile</strong></p><p>Nationality-Unrestricted Nationality</p><p>Expereience-10 years up </p><p>Age: 40 and above</p><p>Bachelor's degree in Engineering is a must</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Conduct thorough diagnostics and troubleshooting of complex systems, utilizing advanced tools to identify malfunctions and provide timely solutions.</li><li>Perform routine maintenance on equipment to ensure optimal performance and longevity, documenting all service activities for compliance.</li><li>Install, configure, and upgrade hardware and software components, ensuring compatibility and functionality in diverse environments.</li><li>Collaborate with engineers and other technicians to design and implement system modifications that enhance operational efficiency.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>A minimum of an Associate's degree in a relevant technical field, such as Electronics or Mechanical Engineering.</p></li><li><p>At least 2 years of hands-on experience in a technician role within a relevant industry, demonstrating practical knowledge and skills.</p></li><li><p>Certifications such as CompTIA A+, Cisco Certified Network Associate (CCNA), or equivalent are highly preferred.</p></li><li><p>Proficiency in troubleshooting and repairing electronic systems, with a strong understanding of circuit design and analysis.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job ELECTRICAL MAINTENANCE ENGINEER <p>(15+ years of experience in Sewage Treatment Plants (STP) or a similar field)</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>INTEGRITY MAINTENANCE ENGINEER </strong>is&nbsp;required by our Client, an Oil and Gas Contractor, to be assigned on a contract basis, located in Abu Dhabi, UAE.</p><br><p><strong>STARTING DATE:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ASAP<br> DURATION:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2 years (renewable)</strong><br><strong>SCHEDULE:</strong><strong>48 hours/week – Monday to Friday</strong></p><br><p><strong>PRINCIPAL RESPONSIBILITIES</strong></p><br><ul><li>Participate in the topo-functional build up.</li><li>Lead the criticality study and prepare the criticality.</li><li>Perform the optimization study on equipment not treated by RCM.</li><li>Prepare for each individual equipment a lubricant schedule and prepare a global lubricant schedule program/ plan.</li><li>&nbsp;Maintenance plans development review and optimization.</li><li>Prepare and issue a global maintenance plan including: <ul><li>Running plan</li><li>Lubrication plan</li><li>On-condition monitoring plan</li><li>Maintenance tasks and associated schedules</li><li>Standard Maintenance procedures</li><li>Specific maintenance procedures</li><li>Maintenance documents and sheets to be linked to the task’s requirement&nbsp;</li><li>Spare parts associated with the maintenance operations</li></ul></li><li>Prepare the condition-based maintenance manual.</li><li>Prepare the maintenance dossiers.</li><li>Prepare the first level maintenance activity document.</li><li>Prepare the spading book.</li></ul><p><strong>QUALIFICATIONS / EXPERIENCE</strong></p><br><ul><li>B.Sc. Mechanical/Instrumentation/Electrical Engineering, or equivalent.</li><li>5 / 12 years’ experience in maintenance field on oil &amp; gas production installations.</li><li>Computer literacy is required.</li><li>Ability to work in a multinational team. Ability to work in a service relationship</li><li>Competence/experience in the relevant specialties.</li><li>Ability to assume responsibility and to interface and communicate effectively with others.</li><li>Effective oral and written communication skills</li><li>Packages/ Tools: MS Office, Highly Proficient in Word, Excel,.</li><li>Management skill</li><li>English proficiency — Fluent in speaking, reading, and writing</li></ul><p>The post Integrity Maintenance Engineer appeared first on Mentor IMC Group.</p><br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Black &amp; Grey HR is seeking a Port Engineer to join our client's marine operations team based in Abu Dhabi, UAE. This is a permanent office-based role with regular vessel visits, drydock attendance, and port travel as required, providing technical management and oversight of the company's owned and long-term chartered vessel fleet.<br></p><br><p>You will be responsible for ensuring vessels are maintained in full compliance with class, flag state, statutory, and client requirements while overseeing planned maintenance, drydock execution, technical procurement, and vendor management. Working closely with vessel Masters, Chief Engineers, class societies, shipyards, and technical service providers, you will ensure fleet reliability, regulatory compliance, and operational readiness across all assigned vessels.<br></p><br><span>Key Responsibilities:</span><br>- Manage the Planned Maintenance System (PMS) across the assigned vessel fleet, ensuring maintenance activities are completed in accordance with manufacturer recommendations, class requirements, flag state regulations, and company procedures.<br><br>- Plan, prepare, and oversee drydock projects, including repair specifications, work scopes, shipyard coordination, budget control, and attendance during key inspection and execution milestones.<br><br>- Coordinate the procurement of technical spares, machinery, equipment, and specialist services to maintain vessel operational readiness while ensuring cost-effective purchasing and timely delivery.<br><br>- Review and monitor technical service reports, maintenance records, class surveys, statutory inspections, and certificate validity to ensure continuous compliance across the fleet.<br><br>- Investigate machinery failures, equipment breakdowns, and technical defects, working closely with vessel engineers and service providers to identify root causes and implement effective corrective actions.<br><br>- Manage technical contractors, repair vendors, OEMs, and service providers, ensuring work is completed safely, efficiently, within budget, and to the required quality standards.<br><br>- Ensure compliance with flag state, class society, ISM Code, statutory regulations, and ADNOC or other client-specific technical requirements for all assigned vessels.<br><br>- Support vessel inspections, technical audits, client vetting processes, pre-charter surveys, and regulatory inspections by preparing technical documentation and coordinating corrective actions where required.<br><br>- Monitor technical maintenance budgets, repair costs, spare parts expenditure, and operational performance, providing regular reporting and cost control recommendations to management.<br><br>- Maintain accurate technical documentation, maintenance history, equipment records, and fleet reporting systems while driving continuous improvements in vessel reliability, safety, and technical performance.<br><br><br><span>Requirements-&nbsp;Class 1 or Class 2 Marine Engineering Certificate of Competency (CoC/OOW).<br><br>-&nbsp;Bachelor's Degree in Marine Engineering, Naval Architecture, or a related engineering discipline is advantageous.<br><br>- Proven experience as a Technical Superintendent, Marine Superintendent, Fleet Technical Manager, or similar shore-based technical role managing commercial vessel fleets.<br><br>- Strong knowledge of planned maintenance systems (PMS), drydock planning, machinery maintenance, technical procurement, and vessel repair management.<br><br>- Excellent understanding of class society requirements, flag state regulations, statutory compliance, ISM Code, and marine engineering best practices.<br><br>- Experience coordinating shipyards, class surveyors, technical vendors, OEMs, and repair contractors.<br><br>- Strong problem-solving, budgeting, stakeholder management, and technical reporting skills.<br><br>- Experience supporting offshore support vessels, workboats, tugs, barges, or similar commercial marine assets is advantageous.<br><br><span>Certifications (Please attach below certificates)</span><br>- Valid Engineer Officer Certificate of Competency (Class 1 or Class 2 CoC).<br><br>- Valid STCW certification.<br><br>- Previous experience working with recognised Class Societies is preferred.<br><br>- ADNOC approval or previous experience supporting ADNOC marine operations is highly advantageous.<br><br></span><br><span>Benefits- Attractive Salary + Benefits<br><br>- Permanent employment with a leading offshore and marine engineering organization<br><br>- Opportunity to provide technical management and fleet support for offshore support vessels, workboats, and other commercial marine assets<br><br>- Exposure to vessel drydock projects, planned maintenance systems, class compliance, technical procurement, and fleet engineering operations<br><br>- Opportunity to work closely with shipyards, class societies, OEMs, vessel crews, and leading offshore energy clients to enhance fleet performance and reliability<br><br>- Long-term career growth and progression into senior technical fleet management and marine engineering leadership roles within a stable organization<br><br><span>HOW TO APPLY</span><br>- Submit your CV along with copies of your relevant marine certifications.<br><br></span><p>Shortlisted candidates will be contacted within 5 working days of application.<br></p><br>BG Marine | Black &amp; Grey HR<br><br>The Offshore &amp; Marine Specialist Desk<br><br>Fast. Precise. Confidential. Human.<br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Overview</strong></p><p>The <strong>Tower Crane Plant Engineer</strong> manages the complete lifecycle, mechanical reliability, and structural integrity of heavy lifting equipment across construction sites. This role bridges technical engineering with field operations to ensure safe, efficient, and legally compliant crane deployments. </p><p><strong>Key Responsibilities</strong></p><p><strong>1. Site Planning &amp; Deployment</strong></p><ul><li><p>Conduct comprehensive <strong>site surveys</strong> to evaluate optimal tower crane positioning.</p></li><li><p>Factor in <strong>building layouts, access routes, and structural loading impacts</strong> during planning.</p></li><li><p>Coordinate the <strong>marking of crane bases and placement of structural ties</strong> per engineering drawings.</p></li><li><p>Formulate detailed <strong>Method Statements and Risk Assessments (MSRA)</strong> for all crane operations.</p></li></ul><p><strong>2. Lifting &amp; Logistics Engineering</strong></p><ul><li><p>Develop engineered <strong>lifting plans</strong>, defining load charts, rigging designs, and boundary constraints.</p></li><li><p>Analyze <strong>outrigger loadings, foundation capacities, and crane mat designs</strong>.</p></li><li><p>Program and establish restricted movement zones and <strong>anti-collision safety systems</strong>. </p></li></ul><p><strong>3. Erection, Dismantling &amp; Commissioning</strong></p><ul><li><p>Supervise the safe <strong>erection, climbing, and dismantling</strong> phases of various tower crane models.</p></li><li><p>Validate <strong>structural stability</strong> and alignment during sequential assembly.</p></li><li><p>Execute comprehensive <strong>load testing and scaling</strong> protocols before signing off on deployment. </p></li></ul><p><strong>4. Inspections &amp; Safety Compliance</strong></p><ul><li><p>Perform mandatory statutory inspections adhering to local authority approvals and international frameworks like <strong>LOLER and PUWER</strong>.</p></li><li><p>Enforce strict <strong>HSE practices</strong> and the industry standard <strong>3-3-3 safety rule</strong>.</p></li><li><p>Maintain accurate engineering logs, statutory inspection files, and service histories. </p></li></ul><p><strong>5. Maintenance &amp; Technical Troubleshooting</strong></p><ul><li><p>Manage <strong>preventive and corrective maintenance</strong> schedules to reduce operational downtime.</p></li><li><p>Diagnose and resolve complex mechanical, hydraulic, and <strong>electrical control system (PLC)</strong> faults.</p></li><li><p>Oversee workshop staff, control spare parts inventories, and handle technical coordination with original manufacturers. </p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>Education</strong>: Bachelor’s Degree in <strong>Mechanical Engineering, Electrical Engineering</strong>, or a closely related discipline.</p></li><li><p><strong>Experience</strong>: Minimum 5+ years of dedicated engineering experience managing high-rise tower cranes (e.g., Liebherr, Wolff, Wilbert).</p></li><li><p><strong>Technical Mastery</strong>: Deep understanding of <strong>load charts, rigging practices, electrical schematics, and PLC drive systems</strong>.</p></li><li><p><strong>Physical Capability</strong>: Physically fit to work at extreme heights and manage technical assessments in diverse outdoor environments.</p></li><li><p><strong>Soft Skills</strong>: Clear cross-functional leadership skills to manage site technicians and align with project managers. </p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>MECHANICAL MAINTENANCE ENGINEER </strong>is&nbsp;required by our Client, an Oil and Gas Contractor, to be assigned on a contract basis, located in Abu Dhabi, UAE.</span></span></p><br><p><strong>STARTING DATE:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ASAP<br> DURATION:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2 years (renewable)</strong><br><strong>SCHEDULE:</strong><strong>48 hours/week – Monday to Friday</strong></p><br><p><strong>PRINCIPAL RESPONSIBILITIES</strong></p><br><ul><li><span><span>Participate in the topo-functional build up.</span></span></li><li><span><span>Lead the criticality study and prepare the criticality.</span></span></li><li><span><span>Perform the optimization study on equipment not treated by RCM.</span></span></li><li><span><span>Prepare for each individual equipment a lubricant schedule and prepare a global lubricant schedule program/ plan.</span></span></li><li><span><span>&nbsp;Maintenance plans development review and optimization.</span></span></li><li><span><span>Prepare and issue a global maintenance plan including:</span></span><ul><li><span><span>Running plan</span></span></li><li><span><span>Lubrication plan</span></span></li><li><span><span>On-condition monitoring plan</span></span></li><li><span><span>Maintenance tasks and associated schedules</span></span></li><li><span><span>Standard Maintenance procedures</span></span></li><li><span><span>Specific maintenance procedures</span></span></li><li><span><span>Maintenance documents and sheets to be linked to the task’s requirement&nbsp; </span></span></li><li><span><span>Spare parts associated with the maintenance operations</span></span></li></ul></li><li><span><span>Prepare the condition-based maintenance manual.</span></span></li><li><span><span>Prepare the maintenance dossiers.</span></span></li><li><span><span>Prepare the first level maintenance activity document.</span></span></li><li><span><span>Prepare the spading book.</span></span></li></ul><p><span><span><strong>QUALIFICATIONS / EXPERIENCE</strong></span></span></p><br><ul><li><span><span>B.Sc. Mechanical&nbsp;Engineering</span></span></li><li><span><span>5 / 12 years’ experience in maintenance field on oil &amp; gas production installations.</span></span></li><li><span><span>Computer literacy is required.</span></span></li><li><span><span>Ability to work in a multinational team. Ability to work in a service relationship</span></span></li><li><span><span>Competence/experience in the relevant specialties.</span></span></li><li><span><span>Ability to assume responsibility and to interface and communicate effectively with others.</span></span></li><li><span><span>Effective oral and written communication skills </span></span></li><li><span><span>Packages/ Tools: MS Office, Highly Proficient in Word, Excel,.</span></span></li><li><span><span>Management skill </span></span></li><li><span><span>English proficiency — Fluent in speaking, reading, and writing</span></span></li></ul><p>The post Mechanical Maintenance Engineer appeared first on Mentor IMC Group.</p><br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimize workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>QUALIFICATIONS &amp; SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Facility Maintenance Engineer is responsible for maintaining building systems and ensuring the safe, efficient, and reliable operation of facilities through preventive and corrective maintenance.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Perform preventive and corrective maintenance of HVAC, electrical, plumbing, fire protection, and mechanical systems.</p></li><li><p>Conduct routine inspections and troubleshoot equipment issues.</p></li><li><p>Coordinate with contractors and supervise maintenance activities.</p></li><li><p>Ensure compliance with safety regulations and maintenance standards.</p></li><li><p>Maintain maintenance records, work orders, and asset documentation.</p></li><li><p>Support facility improvement projects and emergency maintenance.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications</strong></p><ul><li><p>Bachelor's degree in mechanical, Electrical, or related Engineering.</p></li><li><p>3–5 years of experience in facility maintenance or building operations.</p></li><li><p>Knowledge of HVAC, electrical, plumbing, fire protection systems, and CMMS/BMS.</p></li><li><p>Strong troubleshooting, communication, and organizational skills.</p></li></ul><br><p><strong>Salary &amp; Benefits</strong></p><ul><li><p>Competitive salary (based on experience and qualifications)</p></li><li><p>Company-provided accommodation</p></li><li><p>Transportation</p></li><li><p>Employment visa</p></li><li><p>Medical insurance</p></li><li><p>Annual leave as per UAE Labour Law</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><strong><span>JOB PURPOSE</span></strong></p><br> <p>The jobholder is responsible for performing I-C maintenance and repairs, ensuring safe, continuous, and reliable operation of assets, plants, and equipment, which is crucial for Borouge's operational efficiency and adherence to international standards</p><br> <p>This role includes; leading the I-C maintenance and repair activities to ensure the safe, continuous, and reliable operation of assets, plants, and equipment; performing troubleshooting, corrective maintenance, and major repairs during shutdowns; while also conducting predictive, preventative, and proactive maintenance; while supporting commissioning activities, coordinating with contractors, and ensuring compliance with HSE standards, all of which contribute to Borouge's operational efficiency and adherence to international standards.</p><br> <p><strong><span>KEY ACCOUNTABILITIES</span></strong></p><br> <p><strong><span>Instrumentation &amp; Control System Maintenance</span></strong></p><br> <ul> <li>Perform regular preventive and corrective maintenance on instrumentation and control systems, including sensors, transmitters, control valves, analyzers, and actuators to ensure smooth plant operations.</li> <li>Troubleshoot and resolve issues in Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), and SCADA systems to maintain operational efficiency.</li> <li>Conduct calibration, testing, and validation of field instruments (pressure, temperature, flow, and level sensors) to ensure accurate measurement and control.</li> <li>Maintain calibration records and ensure instruments are within operational tolerances to comply with industry standards.</li> <li>Diagnose and repair issues with control loops to optimize process efficiency.</li> <li>Tune control loops to maintain process stability and efficiency.</li> </ul> <p><strong><span>Installation &amp; Commissioning</span></strong></p><br> <ul> <li>Support the installation, configuration, and commissioning of new instrumentation and control systems to ensure proper integration with existing systems.</li> <li>Assist in updating and reviewing control systems to align with process changes or improvements.</li> <li>Participate in planning and scheduling preventive maintenance tasks to minimize disruption to plant operations.</li> <li>Use condition monitoring techniques and tools to predict and prevent potential equipment failures.</li> <li>Follow all HSE guidelines to ensure safety when working with hazardous materials or in potentially explosive environments.</li> <li>Ensure compliance with Lockout/Tagout (LOTO) procedures during maintenance activities to prevent accidents or equipment damage.</li> </ul> <p><strong><span>Maintenance Reporting</span></strong></p><br> <ul> <li>Maintain accurate documentation of all maintenance activities, including calibration data, fault reports, and work orders to ensure traceability.</li> <li>Update Computerized Maintenance Management Systems (CMMS) such as SAP with maintenance records, equipment history, and spare part usage to support maintenance planning.</li> <li>Provide quick response to instrumentation or control system breakdowns to minimize plant downtime.</li> <li>Act as the technical expert for complex issues in instrumentation and control systems to ensure effective troubleshooting.</li> <li>Ensure proper inventory of critical spare parts for instrumentation and control systems to maintain sufficient stock levels.</li> </ul> <p><strong><span>I-C Maintenance Excellence</span></strong></p><br> <ul> <li>Participate in continuous improvement initiatives by identifying and recommending upgrades or improvements to instrumentation and control systems for increased reliability and performance.</li> <li>Collaborate with process engineers to implement process optimization and control strategies to enhance operational efficiency.</li> <li>Conduct task risk assessments to maintain safety at work locations.</li> <li>Test the performance function of SIL instruments and record deviations to ensure functionality.</li> <li>Conduct and participate in risk management for interlock defeat requirements to mitigate risks.</li> <li>Perform visual, close, and detailed inspections of installed Instrument &amp; Control equipment to ensure compliance with standards.</li> </ul> <p><strong><span>HSE Compliance</span></strong></p><br> <ul> <li>Follow all HSE guidelines to ensure strict adherence to safety protocols.</li> <li>Ensure compliance with Lockout/Tagout (LOTO) procedures during maintenance activities to prevent accidents or equipment damage.</li> <li>Support System Engineers in maintaining DCS, ESD, and MCMS system hardware to ensure system integrity.</li> <li>Support maintenance requirements related to profitability programs and alarm management to enhance operational efficiency.</li> <li>Ensure HSE critical and non-HSE Instrument and Control systems operate safely and comply with regulations.</li> <li>Follow up on calibration of all IQE instruments and maintain proper records as per ISO requirements.</li> </ul> <p><strong><span>Spare Parts &amp; Inventory</span></strong></p><br> <ul> <li>Ensure proper inventory of critical spare parts for instrumentation and control systems to maintain sufficient stock levels.</li> <li>Assist in identifying the need for spare parts and new instrumentation technology to support continuous improvement.</li> <li>Segregate repairable and non-repairable items and initiate actions for refurbishment to optimize resource use.</li> <li>Raise material reservations and assist in receipt and quality check of materials to ensure availability.</li> <li>Maintain records of work performed, progress, and related data for monthly reports to support maintenance planning.</li> <li>Initiate failure reports and support engineers in root cause failure analysis to improve system reliability.</li> </ul> <p><strong><span>Emergency Response &amp; Troubleshooting</span></strong></p><br> <ul> <li>Provide quick response to instrumentation or control system breakdowns to minimize plant downtime.</li> <li>Act as the technical expert for complex issues in instrumentation and control systems to ensure effective troubleshooting.</li> <li>Perform fault analysis and corrective actions to maintain operational efficiency.</li> <li>Conduct equipment troubleshooting and decide on corrective actions to ensure proper maintenance.</li> <li>Supervise Instrument and Control maintenance jobs to minimize failures and ensure equipment reliability.</li> <li>Coordinate with different departments to ensure timely completion of maintenance jobs to support operational efficiency.</li> </ul> <p><span><strong><span>QUALIFICATIONS, EXPERIENCE, KNOWLEDGE &amp; SKILLS</span></strong></span></p><br> <ul> <li>Diploma in I-C, or any equivalent technical qualifications.</li> <li>Technical diploma or certificate in I-C Engineering, I-C Technology, or a related field from a recognized technical institute.</li> <li>Technical diploma or certificate in Instrumentation Engineering, Control Systems Engineering, Electrical Engineering, or a related field from a recognized technical institute.</li> <li>Experience in various I-C equipment and their maintenance and trouble shooting.</li> <li>Familiar with I-C plant safety procedures and maintenance of quality procedures/records.</li> <li>Effective communication and technical report writing skills in English.</li> </ul> <ul> <li>Minimum of 5 – 7 years of relevant experience in installation, repair, testing and maintenance of a wide range equipment items of production facilities in an oil/gas or petrochemical industry.</li> <li>5–8 years of hands-on experience in instrumentation and control maintenance, ideally within the oil, gas, or petrochemical industries.</li> <li>Experience working with field instruments, control systems (PLCs, DCS), and process control loops</li> <li>Extensive experience in maintaining I-C systems, including switchgear, motors, MCCs, and transformers.</li> </ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.Accepts direction from his supervisor verbally or in writing.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum Qualifications:Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualificationMinimum Experience:Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)Craft /Trade certificate holders: 8 years’ experience in mechanical maintenanceHands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhaulsSkills:Familiar with all mechanical maintenance toolsKnowledge of PCs, Computer literacy is essentialConversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standardExcellent interpersonal skills and assertivenessTeam work (including shift work is also essential)Self-motivation &amp; dedicationWork in a Multi-Cultural environment</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>JOB PURPOSE:</strong></p><p>Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><ul><li><p>Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant.</p></li><li><p>Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible.</p></li><li><p>Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner.</p></li><li><p>Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries.</p></li><li><p>Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems.</p></li><li><p>Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans.</p></li><li><p>Probability of significant exposure in various degrees to physical &amp; sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges.</p></li><li><p>Accepts direction from his supervisor verbally or in writing.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>QUALIFICATIONS &amp; SKILLS:</strong></p><p><strong>Minimum Qualifications:</strong></p><p>Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification<strong> Minimum Experience:</strong></p><ul><li><p>Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant)</p></li><li><p>Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance</p></li></ul><p>Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls</p><p><strong>Skills:</strong></p><ul><li><p>Familiar with all mechanical maintenance tools</p></li><li><p>Knowledge of PCs, Computer literacy is essential</p></li><li><p>Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis PlantSpeak, read and write English to a good standard</p></li><li><p>Excellent interpersonal skills and assertiveness</p></li><li><p>Team work (including shift work is also essential)</p></li><li><p>Self-motivation &amp; dedication</p></li><li><p>Work in a Multi-Cultural environment</p></li></ul></li></ul><p></p></section>