وظائف فني تعبئة و تغليف في الإمارات

<ul><li>Diagnose and troubleshoot complex issues within VRF systems, pinpointing root causes of performance degradation or failure.</li><li>Perform preventative maintenance on VRF units, including cleaning coils, checking refrigerant levels, and inspecting electrical components to ensure optimal operation.</li><li>Install and commission new VRF systems, ensuring proper piping, wiring, and control integration according to manufacturer specifications and project blueprints.</li><li>Repair and replace faulty components such as compressors, fans, valves, and control boards, utilizing specialized tools and diagnostic equipment.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>High School Diploma or equivalent; Associate's degree in HVAC or related field preferred.</p></li><li><p>EPA Section 608 Universal Certification is mandatory for handling refrigerants.</p></li><li><p>Minimum of 4-8 years of hands-on experience specifically with Variable Refrigerant Flow (VRF) systems.</p></li><li><p>Proven ability to read and interpret complex electrical schematics, mechanical drawings, and control sequences.</p></li></ul>

<ul><li><p>To execute Instrumentation System pre-commissioning and commissioning work scope in a safe manner and in accordance with contract specifications /requirements and schedule</p></li><li><p>Provide support to the Instrumentation & Control Commissioning Engineer</p></li><li><p>Under safe systems of work, function testing of all field Instruments and equipment in both onshore and offshore locations</p></li><li><p>Offshore work scope will require working in Hazardous areas and therefore the candidate MUST be able to demonstrate a good understanding of the risks associated with working in a Hazardous areas.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Degree/Diploma in Instrumentation & Control Engineering, Electronics, Automation or equivalent degrees from recognised Universities</p></li><li><p>Minimum Seven (7) years Oil and Gas Industry experience in Instrumentation Construction, Installation and system commissioning</p></li><li><p>Proficiency in handling Instrumentation system commissioning test equipment and related software tools.</p></li><li><p>BOSIET/ MIST/ CA- EBS certification and Medically fit for Offshore work</p></li><li><p>Mandatory HSE Training (Induction, Risk Assessment etc)</p></li><li><p>IT Literate (Excel / Word / PowerPoint)</p></li></ul>

<ul><li><p>Install and commission <strong>IoT devices</strong> at customer sites <strong>(mounting, power, connectivity).</strong></p></li><li><p>Carry out routine maintenance visits — <strong>inspection, calibration, sensor and power checks</strong>.</p></li><li><p><strong>Troubleshoot device issues</strong> in the field: power, Wi-Fi/SIM connectivity, sensor faults.</p></li><li><p>Check <strong>device logs and data</strong> on the platform to spot and <strong>diagnose issues.</strong></p></li><li><p>Keep simple records of visits, faults fixed, and spare parts used.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>ITI, Diploma, or degree in Electronics, Electrical, or a related field (Electronics Engineering preferred).</p></li><li><p>1-3 years of experience or freshers with good learning attitude are encouraged.</p></li><li><p>Basic coding knowledge (Python, Arduino/C, or similar).</p></li><li><p>Familiarity with checking device/system logs is a plus.</p></li><li><p>Good communication skills in English.</p></li><li><p>Willing to travel to sites across the Emirate of Abu Dhabi.</p></li><li><p>UAE driving license preferred (added advantage).</p></li></ul>

Key Responsibilities:Install, maintain, troubleshoot and repair HVAC systems and equipment. Perform preventive and corrective maintenance. Diagnose electrical, mechanical and refrigeration-related HVAC issues. Monitor system performance and ensure efficient operation. Handle AC units, chillers, ventilation and related equipment. Maintain service records and report technical issues. Ensure compliance with safety and maintenance standards. Coordinate with the facilities/maintenance team for timely resolution of breakdowns.

<ul><li><p>Troubleshoot, repair, test, and maintain VFDs.</p></li><li><p>Diagnose electrical/electronic faults and replace defective components.</p></li><li><p>Perform preventive maintenance and final testing.</p></li><li><p>Maintain repair records and follow safety procedures.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>5–10 years of experience in VFD repair and troubleshooting.</p></li><li><p>Diploma/ITI/Degree in Electrical or Electronics.</p></li><li><p>Good knowledge of VFDs, control circuits, and power electronics.</p></li><li><p>Strong fault-finding and problem-solving skills.</p></li><li><p>Ability to work independently and as part of a team.</p></li></ul>

<p>Location: Abu Dhabi- Refinery</p><p>Functional Area: Integrity &amp; Engineering</p><p>Career Status: Support level</p><p><br></p><p>Purpose of Job</p><ul><li>Monitor and maintain all Cathodic Protection (CP) Systems at Ruwais Refinery and update the CP system records on regular basis.</li></ul><p><br></p><p>Minimum Job Requirements</p><ul><li>Completion of 2 years diploma in an Electrical/Instrumentation with NACE Level-1 certification.</li><li>Minimum 5 years experience in the field of Cathodic Protection in industrial plant</li><li>Knowledge of various types of Remote monitoring systems.</li><li>Fair knowledge of English.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Overview of the role:</b></p><p>Complete service and maintenance operations such as oil change, tyre services (replacement, balancing, puncture repair), brake replacement, servicing, basic diagnostics and air conditioning re-gas, on all makes and models of car and light commercial (LCV) as per company/manufacturer standards. Role is responsible for contributing to the business’s revenue and customer satisfaction.&nbsp;</p><p>&nbsp;</p><p><b>What you will do:</b></p><p><b><i>Job execution&nbsp;</i></b></p><p>•&nbsp;&nbsp;Conduct repairs and maintenance on all passenger car and light commercial vehicles</p><p>•&nbsp;&nbsp;Complete and maintain check sheets and vehicle write ups on the repair order</p><p>•&nbsp;&nbsp;Report additional work required on vehicles after completing an EVHC</p><p>•&nbsp;&nbsp;Provide Estimations of repairs &amp; services to customer</p><p>•&nbsp;&nbsp;Use a range of technology to complete basic diagnostic checks and electronic inspections</p><p><b><i>Tools, Equipment and Work Vehicle</i></b></p><p>•&nbsp;&nbsp;Upkeep tools and equipment in the individual company vehicle as per company standards&nbsp;</p><p>•&nbsp;&nbsp;Proper handling of special tools.&nbsp;</p><p>•&nbsp;&nbsp;Housekeeping to be maintained at place of work / area of operation</p><p>•&nbsp;&nbsp;Usage of special service tools including Intelligent Testers and Scan tools</p><p>•&nbsp;&nbsp;Manage parts inventory on vehicle and returns of unused parts</p><p>•&nbsp;&nbsp;Manage personal and working environment Health and safety – ensuring safe working practices maintained</p><p>•&nbsp;&nbsp;Environmental control of dangerous substances such as oil and brake fluid</p><p><b><i>Fix it Right First Time&nbsp;</i></b></p><p>•&nbsp;&nbsp;Ensure zero repeat repairs</p><p>•&nbsp;&nbsp;Proper diagnosis and trouble shooting&nbsp;</p><p>•&nbsp;&nbsp;Conduct final inspection and quality testing of vehicles</p><p>•&nbsp;&nbsp;Achieve high level of customer satisfaction and advocacy</p><p><b><i>Productivity and Efficiency&nbsp;</i></b></p><p>•&nbsp;&nbsp;Deliver the desired efficiency and productivity as per targets given.&nbsp;</p><p>•&nbsp;&nbsp;Manage time on job to ensure the days scheduled work will be completed&nbsp;</p><p>•&nbsp;&nbsp;Time management and punctuality at each job</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required skills to be successful:</b></p><p>•&nbsp;&nbsp;Trade Certificate / Diploma in Mechanical / Automobile Eng.</p><p>•&nbsp;&nbsp;Must show proven technical expertise in independent servicing, repairs, and component replacement</p><p>•&nbsp;&nbsp;Basic diagnostic skills with mechanical and electronic faults</p><p>•&nbsp;&nbsp;Multi-brand automotive service center experience in the automotive industry is a must</p><p>&nbsp;</p><p><b>About the team:</b></p><p>The role will report to the Service Supervisor and you will be working in a busy workshop environment. You will play a crucial role in identifying basic diagnosis issues and resolve issues as per dealer/manufacturer standards.&nbsp;</p><p>&nbsp;</p><p><b>What equips you for the role:</b></p><p>•&nbsp;&nbsp;At least 5 years of experience on car and light commercial vehicles (LCV)</p><p>•&nbsp;&nbsp;UAE clean Driving License is preferable&nbsp;</p><p>•&nbsp;&nbsp;Expert understanding of all core vehicle systems</p><p>•&nbsp;&nbsp;The ability to explain complex faults to customers if required</p><p>•&nbsp;&nbsp;Good English communication skills (verbal &amp; written), Arabic and other languages is a plus&nbsp;</p></div>

<p>Location: Ruwais Refinery - East</p><p>Functional Area: Maintenance Planning &amp; Scheduling</p><p>Career Status: Support level</p><p><br></p><p>Purpose of Job</p><ul><li>Carries out the skilled installation, maintenance and repair of a wide range of high and low voltage equipment and associated systems such as generators, motors, transformers, uninterrupted power systems (UPS), rectifiers, batteries, desalinators, switch gears, fire fighting systems, control panels and substations.</li></ul><p><br></p><p>Minimum Job Requirements</p><ul><li>Completion of Technical Secondary (12 Years) education followed by 1 year Diploma in Electrical equipment maintenance.</li><li>5 Years’ experience in the installation, maintenance and repair of high and low voltage power equipment, associated controls, motor starters and plant electrical distribution system, preferably in an oil/gas or petrochemical industry.</li><li>Fair knowledge of English language.</li></ul>

<ul><li><p>To trouble-shoot, repair, re-commission and maintain efficiently field instrumentation for gas turbines, steam turbines, waste heat boilers, and desalination plant and its auxiliaries to ensure efficient operation and reduce equipment availability down time. KEY ACCOUNTABILITIES: Attends to Power and Desalination plant field instrumentation breakdowns and planned maintenance work with minimum direction and supervision.Technically assesses the requirement of the allocated jobs and selects the necessary tools and equipment to complete such work.Using the computerized maintenance system, orders the spare parts from the warehouse and maintains records of all maintenance work completed.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements. Reports repeated breakdowns and assist in RCFA to identify an optimum solution to resolve the problem.Provides on the job training to new craftsmen in order to equip them with the necessary skills to be able to carry out maintenance repair work as planned.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum Qualifications: Higher secondary or diploma Minimum Experience: Must be familiar with all maintenance tools and should have good knowledge of Plant Safety. The knowledge and experience required in the position is that gained previously experience working in a power or desalination plant and with exposure preferably to any of the maintenance and calibration of the following field instrumentation: Pressure, temperature, level, & flow measuring devicesPneumatic & Hydraulic valve actuation systems CO2 Fire Protection systemsInfrared Gas Detection systemsWorking under time and technical pressure, and knowing that any mistake/error made will substantially cost the power station either on delay, equipment damage, or personnel injury.He can be assigned and work on shift duty. He can be called out any time to attend to breakdown work for the shift operation manager.He has to keep abreast with new technologies and control concepts. Working in very hot, dirty environment, and high level platforms. Skills: Must be able to read and understand engineering drawings and manuals.</p></li><li><p>Must have knowledge / experience in the field of electrical, electronics, computer, hydraulic, and pneumatic devices</p></li></ul>

<ul><li><p>To trouble-shoot, repair, re-commission and maintain efficiently field instrumentation for gas turbines, steam turbines, waste heat boilers, and desalination plant and its auxiliaries to ensure efficient operation and reduce equipment availability down time. KEY ACCOUNTABILITIES: Attends to Power and Desalination plant field instrumentation breakdowns and planned maintenance work with minimum direction and supervision.Technically assesses the requirement of the allocated jobs and selects the necessary tools and equipment to complete such work.Using the computerized maintenance system, orders the spare parts from the warehouse and maintains records of all maintenance work completed.Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements. Reports repeated breakdowns and assist in RCFA to identify an optimum solution to resolve the problem.Provides on the job training to new craftsmen in order to equip them with the necessary skills to be able to carry out maintenance repair work as planned.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum Qualifications: Higher secondary or diploma Minimum Experience: Must be familiar with all maintenance tools and should have good knowledge of Plant Safety. The knowledge and experience required in the position is that gained previously experience working in a power or desalination plant and with exposure preferably to any of the maintenance and calibration of the following field instrumentation: Pressure, temperature, level, & flow measuring devicesPneumatic & Hydraulic valve actuation systems CO2 Fire Protection systemsInfrared Gas Detection systemsWorking under time and technical pressure, and knowing that any mistake/error made will substantially cost the power station either on delay, equipment damage, or personnel injury.He can be assigned and work on shift duty. He can be called out any time to attend to breakdown work for the shift operation manager.He has to keep abreast with new technologies and control concepts. Working in very hot, dirty environment, and high level platforms. Skills: Must be able to read and understand engineering drawings and manuals.Must have knowledge / experience in the field of electrical, electronics, computer, hydraulic, and pneumatic devices</p></li></ul>

<ul><li><p>Attends to all instrument & control equipment breakdowns and planned/ preventive/predictive maintenance work with minimum direction & supervision, within the given time constraint minimizing production downtime.</p></li><li><p>Technically assesses the requirements of allocated jobs and selects the necessary tool&nbsp;and equipment to complete such work.</p></li><li><p>Effectively diagnoses instrument & control breakdowns/failures & troubleshoots failures of plant and equipment with minimal direction.</p></li><li><p>Completes all maintenance work in accordance to the safety procedures, maintenance&nbsp;plans and plant operational&nbsp;requirements.</p></li><li><p>Achieves all equipment calibrations as per the schedule/business requirements.</p></li><li><p>Using the computerized maintenance system (SAP), orders the necessary spare parts from&nbsp;warehouse and maintains records of all maintenance work completed.</p></li><li><p>Monitors any repeated breakdown and recommends proper modification to resolve the problem and completes the required modification to resolve the problem.</p></li><li><p>Provides guidance to newly joined instrument mechanics to familiarize them with the plant and shares the&nbsp;knowledge necessary for them to be fully equipped to carry out maintenance work.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum Qualifications: Higher secondary or diploma Minimum Experience: Must be familiar with all maintenance tools and should have good knowledge of Plant Safety. The knowledge and experience required in the position is that gained previously experience working in a power or desalination plant and with exposure preferably to any of the maintenance and calibration of the following field instrumentation: Pressure, temperature, level, & flow measuring devices Pneumatic & Hydraulic valve actuation systems CO2 Fire Protection systems Infrared Gas Detection systems Working under time and technical pressure, and knowing that any mistake/error made will substantially cost the power station either on delay, equipment damage, or personnel injury. He can be assigned and work on shift duty. He can be called out any time to attend to breakdown work for the shift operation manager. He has to keep abreast with new technologies and control concepts. Working in very hot, dirty environment, and high level platforms. Skills: Must be able to read and understand engineering drawings and manuals. Must have knowledge / experience in the field of electrical, electronics, computer, hydraulic, and pneumatic devices</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><b><span>Key Responsibilities</span></b><br> </span><ul> <li><span>Diagnose and repair vehicle A/C system faults.</span><br></li> <li><span>Complete repairs within the allocated time while maintaining quality standards.</span><br></li> <li><span>Report additional defects and parts requirements to the Supervisor.</span><br></li> <li><span>Follow manufacturer manuals, repair procedures, and company standards.</span><br></li> <li><span>Test repaired A/C systems before vehicle handover.</span><br></li> <li><span>Maintain vehicle cleanliness and ensure proper use and care of workshop tools.</span><br></li> <li><span>Comply with QHSEMS policies and maintain a safe, organized work environment.</span><br></li> </ul><p><b><span>Apply now if you meet the above requirements and are willing to work anywhere in the UAE.</span></b><br></p><br> <br><span>Requirements<span>ITI/Diploma in Electrical, Refrigeration, or Air Conditioning</span><br><span>3–4 years of experience in Automotive A/C systems</span><br><span>Experience diagnosing and repairing A/C systems for light and heavy commercial vehicles</span><br> </span><br><span>Benefits<span>AED 3,500/month</span><br><span>Accommodation &amp; Transportation Provided</span><br> </span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p><b>Experience:</b> Minimum 5 years</p><p><b>Employment Type:</b> Full-time</p><p>We are looking for an experienced <b>Technical Engineer (Civil or Architectural)</b> to join our construction team in the UAE.</p><p><b>Key Responsibilities:</b></p><ul><li>Prepare and review <b>shop drawings, detailed drawings, and construction drawings</b>.</li><li>Review project drawings, specifications, and BOQs to identify technical requirements and discrepancies.</li><li>Prepare and submit <b>RFIs, material submittals, method statements, and technical documents</b>.</li><li>Coordinate with consultants, subcontractors, suppliers, and site teams to resolve technical issues.</li><li>Review and coordinate <b>Civil and Architectural works</b> with MEP and structural drawings.</li><li>Ensure drawings and technical submissions comply with project specifications and authority requirements.</li><li>Provide technical support to the site team and assist in resolving construction-related issues.</li><li>Coordinate drawing revisions and maintain proper documentation and records.</li><li>Conduct site visits when required to verify drawings and ensure proper execution of works.</li><li>Assist with quantity take-offs and technical measurements when required.</li></ul><p><b>Requirements:</b></p><ul><li>Bachelor's degree in <b>Civil Engineering or Architecture</b>.</li><li>Minimum <b>5 years of relevant experience</b> in construction.</li><li>UAE construction experience is preferred.</li><li>Strong knowledge of <b>AutoCAD</b> and technical drawings.</li><li>Good understanding of construction methods, specifications, and coordination.</li><li>Ability to read and interpret architectural, structural, and MEP drawings.</li><li>Good communication and coordination skills.</li><li>Ability to work independently and as part of a team.</li><li><b>Immediate joiners are preferred.</b></li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Skills Required</p><ul><li>AutoCAD – Advanced</li><li>Shop Drawing Preparation &amp; Review</li><li>Technical Drawing &amp; Detailing</li><li>RFIs &amp; Technical Submittals</li><li>Method Statements</li><li>Material Submittals</li><li>Drawing Coordination</li><li>BOQ &amp; Quantity Take-Off</li><li>Knowledge of Civil &amp; Architectural Works</li><li>Ability to Read Structural &amp; MEP Drawings</li><li>Technical Problem Solving</li><li>Site &amp; Consultant Coordination</li><li>Strong Communication Skills</li><li>Attention to Detail</li><li>MS Office</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>Closing date: 16/08/2026&nbsp;<br> Number of positions: 1<br> Recruiter name:&nbsp;Fatma Alharthi&nbsp;<br> Reference number: 68408&nbsp;<br> Workplace Type:&nbsp;</p><br> <p>Mediclinic Parkview Hospital&nbsp;| Dubai | United Arab Emirates</p><br> <b>MAIN PURPOSE OF JOB</b> <br><p>To provide comprehensive biomedical technical support to the business unit, including preventative maintenance and repairs&nbsp;on medical equipment</p><br> <br><br><b>KEY RESPONSIBILITY AREAS</b> <br><p><span><span><span><span><span><span>Perform scheduled maintenance and performance assurance inspections on equipment to ensure safe and effective operating conditions</span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span>Test and calibrate components using a variety of manuals, troubleshooting techniques, and code requirements</span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span>Ensure compliance with safety regulations and policies, including end user training&nbsp;</span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span>Repair and replace biomedical equipment and systems</span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span>Install and adjust a variety of biomedical and research equipment</span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span>Diagnose equipment malfunctions and act as first level support for biomedical queries</span></span></span></span></span></span></p><br> <br><br><b>REQUIRED EDUCATION</b> <br><p>A relevant associate degree in biomedical engineering or a related field from an accredited institution</p><br> <br><br><b>REQUIRED EXPERIENCE</b> <br><p>At least 2 years' experience in the installation, repair, maintenance and calibration of biomedical equipment in a healthcare setting</p><br> <br><br><b>REQUIRED JOB SKILLS AND KNOWLEDGE</b> <br><br><br><p>All applicants will be considered, with the understanding that preference will be given to the designated groups in accordance with the United Arab Emirates Emiratization Program. If you wish to grow with us, apply now and become a part of the Mediclinic Middle East Family</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Conduct thorough inspections of residential and commercial properties to identify pest infestations and assess damage.</li><li>Develop and implement customized treatment plans tailored to specific pest problems, ensuring effectiveness and safety.</li><li>Apply pesticides and other control measures in compliance with local regulations and safety standards to minimize environmental impact.</li><li>Educate clients on pest prevention strategies, including sanitation practices and habitat modification to reduce future infestations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent; additional certifications in pest management are a plus.</li><li>Previous experience in pest control or a related field, ideally 2-3 years, showcasing hands-on technical skills.</li><li>Certification from a recognized pest control authority, demonstrating knowledge of local regulations and safety practices.</li><li>Proven ability to identify various pests and their behaviors, allowing for effective treatment and prevention strategies.</li></ul><p></p></section>

<ul><li><p>Experience in Gas Turbine & Steam Turbine Generator / Generator Transformer Protection systems of different Make like Areva/Siemens/Schneider/ABB/GE</p></li><li><p>Testing and commissioning of Power and Distribution Transformer Protection systems &nbsp;</p></li><li><p>Experience in control circuits troubleshooting of the HV/LV Switchgear and protection</p></li><li><p>Experience in HV Motors Protection systems</p></li><li><p>Experience in 132KV/33KV Gas Insulated Switchgear</p></li><li><p>Experience in Power and Distribution Transformer maintenance</p></li><li><p>Experience in HV/LV switchgear maintenance</p></li><li><p>HV cables, cable differential/feeder Protection systems</p></li><li><p>Low Impedance Bus Bar Protection systems such as REB500, REB670 and high Impedance bus bar protection systems</p></li><li><p>Competent of using the secondary and primary injection test kits</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul><p><strong>Minimum Experience:</strong></p><ul><li><p>5 Years’ relevant experience in a heavy industry after Diploma</p></li><li><p>2 Years’ experience as an electrician after PEC Training</p></li></ul><p><strong>Skills:</strong></p><ul><li><p>Excellent knowledge of written and spoken English</p></li><li><p>Familiarity with all maintenance tools and should have good IT Skills</p></li><li><p>Expertise in installation & troubleshooting</p></li><li><p>Ability to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul>

<ul><li>Conduct quality control checks throughout the assembly process to ensure each product meets the established standards.</li><li>Utilize hand tools, power tools, and specialized machinery safely and effectively to complete assembly tasks.</li><li>Collaborate with engineering teams to troubleshoot and resolve any assembly-related issues swiftly and efficiently.</li><li>Document assembly processes and maintain accurate records of completed work for quality assurance purposes.</li><li>Train and mentor new assembly team members to ensure adherence to best practices and company standards.</li><li>Participate in regular safety meetings and adhere to all safety protocols to minimize workplace hazards.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Ability to read and interpret technical drawings, schematics, and production manuals with precision.</li><li>Strong problem-solving skills and the ability to think critically under pressure.</li><li>Effective communication skills to collaborate with team members and report issues as they arise.</li><li>Attention to detail is crucial, ensuring high-quality standards in all assembly tasks.</li><li>Physical stamina and dexterity to handle repetitive tasks and lift components safely when necessary.</li><li>Willingness to work flexible hours, including overtime and weekends, as production demands may vary.</li></ul>

<ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities; repairs and/or replaces required items, re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures and troubleshoots electrical failures of plant and equipment with minimum or no direction.</p></li><li><p>Uses the computerized maintenance system (SAP) to order spare parts from the warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdowns and recommends proper modifications to resolve the problem.</p></li><li><p>Provides plant & equipment knowledge to newly joined electricians/craft trainees and contractors to help them carry out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant & Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul></li><li><p><strong>Minimum Experience:</strong></p><ul><li><p>3 years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul></li><li><p><strong>Skills:</strong></p><ul><li><p>Good knowledge of written and spoken English</p></li><li><p>Familiarity with all maintenance tools and good IT knowledge</p></li><li><p>Experience in installation & troubleshooting</p></li><li><p>Ability to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul>

<ul><li><p>Attends to all electrical equipment breakdowns such as LV-MV motors, LV Switchboards, MCCs, Plant lightings, Transformers, UPS, VFD, Breakers, Soft starter, etc. In addition, carries out planned/preventive/predictive maintenance work with minimum direction and supervision.</p></li><li><p>Identifies and reports any abnormalities; repairs and/or replaces required items, re-assembles and tests the equipment, leaving the working area clean.</p></li><li><p>Technically assesses the requirement of allocated jobs and selects the necessary tools and equipment to complete such work.</p></li><li><p>Effectively diagnoses electrical breakdowns/failures and troubleshoots electrical failures of plant and equipment with minimum or no direction.</p></li><li><p>Uses the computerized maintenance system (SAP) to order spare parts from the warehouse and maintains records of all maintenance work completed.</p></li><li><p>Ensures that all maintenance work is carried out in accordance with safety procedures and plant operational requirements.</p></li><li><p>Monitors any repeated breakdowns and recommends proper modifications to resolve the problem.</p></li><li><p>Provides plant & equipment knowledge to newly joined electricians/craft trainees and contractors to help them carry out their maintenance work.</p></li><li><p>Continuously works towards improving EHS and Plant & Equipment Performance by participating in 5S, Business Excellence and Safety Initiatives.</p></li><li><p>Performs other related duties as communicated by Supervisor/Superior.</p></li><li><p>Assists other departments in the repair and troubleshooting of equipment.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Minimum Qualifications:</strong></p><ul><li><p>Diploma in relevant field</p></li><li><p>Completion of PEC Craft Training</p></li></ul></li><li><p><strong>Minimum Experience:</strong></p><ul><li><p>3 years of relevant experience in a heavy industry after Diploma</p></li><li><p>No experience required after completion of PEC Training</p></li></ul></li><li><p><strong>Skills:</strong></p><ul><li><p>Good knowledge of written and spoken English</p></li><li><p>Familiarity with all maintenance tools and good IT knowledge</p></li><li><p>Experience in installation & troubleshooting</p></li><li><p>Ability to read and understand engineering drawings/manuals/instructions</p></li></ul></li></ul>