وظائف مهندس تفتيش هندسي في الإمارات

<ul><li><p>MEP Engineering</p><ul><li><p>Coordinate and supervise MEP installation activities across project sites.</p></li><li><p>Review MEP drawings, shop drawings, specifications, BOQs, and method statements.</p></li><li><p>Coordinate HVAC, electrical, plumbing, firefighting, drainage, and other MEP works as applicable.</p></li><li><p>Coordinate MEP interfaces with civil, structural, architectural, and specialist works.</p></li><li><p>Monitor site progress and ensure works are executed as per approved designs and schedules.</p></li><li><p>Review material submittals and ensure approved materials are used.</p></li><li><p>Coordinate inspections, testing, commissioning, snagging, and handover activities.</p></li><li><p>Resolve technical issues and coordinate with consultants, contractors, and project teams.</p></li></ul><p>QA/QC – Civil</p><ul><li><p>Implement project Quality Plans, ITPs, procedures, and inspection requirements.</p></li><li><p>Inspect civil works including excavation, reinforcement, formwork, concrete, masonry, waterproofing, structural works, and finishing.</p></li><li><p>Review drawings, specifications, method statements, material submittals, and inspection checklists.</p></li><li><p>Conduct inspections and coordinate approvals with consultants and clients.</p></li><li><p>Ensure construction activities comply with approved drawings, specifications, and applicable standards.</p></li><li><p>Raise and monitor NCRs, observations, and corrective actions.</p></li><li><p>Verify material quality, test certificates, laboratory reports, and calibration records.</p></li><li><p>Maintain quality records, inspection reports, test results, and handover documentation.</p></li></ul><p>Project Coordination</p><ul><li><p>Coordinate with project managers, construction teams, consultants, subcontractors, suppliers, and other disciplines.</p></li><li><p>Monitor project progress and identify technical or quality issues.</p></li><li><p>Provide technical guidance to engineers, supervisors, and site teams.</p></li><li><p>Participate in coordination meetings and follow up on action items.</p></li><li><p>Support project handover, snag clearance, and closeout activities.</p></li></ul><p>HSE & Compliance</p><ul><li><p>Ensure compliance with company, project, client, and UAE HSE requirements.</p></li><li><p>Ensure safe execution of MEP and civil activities.</p></li><li><p>Participate in site inspections and identify potential safety risks.</p></li><li><p>Ensure corrective actions are implemented for HSE and quality observations.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Qualifications</p><ul><li><p>Bachelor’s Degree in <strong>Mechanical, Electrical, Civil, MEP Engineering, or related discipline</strong>.</p></li><li><p>Relevant QA/QC certifications such as <strong>ISO 9001, CSWIP, or equivalent</strong> will be an advantage.</p></li></ul><p>Experience</p><ul><li><p>Typically <strong>7–12 years of relevant experience</strong> in MEP engineering, civil QA/QC, construction, or infrastructure projects.</p></li><li><p>Strong experience in large-scale construction, EPC, MEP, or infrastructure projects.</p></li><li><p>UAE/GCC experience is preferred.</p></li><li><p>Experience working with consultants, contractors, and major clients is an advantage.</p></li></ul><p>Technical Skills</p><ul><li><p>MEP Engineering & Coordination</p></li><li><p>Civil QA/QC & Inspection</p></li><li><p>Technical Drawing Review</p></li><li><p>ITPs, Method Statements & Checklists</p></li><li><p>Material Inspection & Approval</p></li><li><p>NCR & Corrective Action Management</p></li><li><p>Testing & Commissioning</p></li><li><p>Quality Documentation</p></li><li><p>MS Office and relevant engineering software</p></li><li><p>Knowledge of UAE/international construction standards</p></li></ul><p>Key Competencies</p><ul><li><p>Technical Expertise</p></li><li><p>Quality Focus</p></li><li><p>Project Coordination</p></li><li><p>Problem Solving</p></li><li><p>Attention to Detail</p></li><li><p>Teamwork & Leadership</p></li><li><p>Communication Skills</p></li><li><p>Planning & Organization</p></li><li><p>Stakeholder Management</p></li></ul></li></ul><br><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<p>Department: Quality Assurance & Quality Control Industry: Construction (Buildings / Infrastructure / Civil Works) Job Summary The QA/QC Engineer is responsible for implementing and maintaining the Quality Management System (QMS) on construction projects, ensuring that all materials, workmanship, and construction activities comply with project specifications, contract requirements, applicable codes, and international quality standards. Key Responsibilities • Implement the Project Quality Plan (PQP), Inspection & Test Plans (ITPs), and quality procedures. • Conduct inspections of civil, architectural, structural, and finishing works to ensure compliance with project specifications. • Coordinate with consultants, clients, subcontractors, and site engineers for inspections and approvals. • Prepare and submit Inspection Requests (IRs), Material Inspection Requests (MIRs), and quality documentation. • Monitor construction activities to ensure compliance with approved drawings, method statements, and technical specifications. • Identify non-conforming works (NCRs), investigate root causes, and ensure corrective and preventive actions are implemented. • Review material submittals, shop drawings, and method statements from a quality perspective. • Ensure all materials delivered to site meet project specifications and approved standards. • Maintain quality records, inspection reports, calibration certificates, test results, and quality logs. • Coordinate laboratory testing of construction materials such as concrete, soil, steel, and asphalt. • Participate in internal and external quality audits. • Ensure compliance with ISO 9001 Quality Management System requirements. • Monitor subcontractors' quality performance and ensure compliance with contractual obligations. • Attend project meetings related to quality matters. • Prepare weekly and monthly quality reports for project management. • Assist during project handover and close-out by preparing quality dossiers and as-built documentation. Reporting To Project Manager / QA/QC Manager</p><p>- Bachelor’s degree in Civil Engineering, Construction Management, or related field. - Proven experience of 5+ years as a QA/QC Engineer, in the construction industry within the UAE or similar markets. - Strong knowledge of local construction codes, standards, and regulations. - Familiarity with quality control methodologies, inspection techniques, and testing procedures. - Excellent analytical and problem-solving skills with attention to detail. - Ability to work effectively in a fast-paced, multicultural environment. - Good communication and interpersonal skills to collaborate with diverse project stakeholders. - Relevant certifications in quality management (e.g., ISO 9001) or construction quality control are desirable. - Proficiency in using quality management software and MS Office applications. If interested for the opportunity click on the apply button.</p>

<ul><li><p>Develop, review, and implement HSE Plans, Procedures, and Method Statements/Risk Assessments (MSRA).</p></li><li><p>Conduct regular site HSE inspections and monitoring activities to ensure compliance with project requirements.</p></li><li><p>Prepare HSE inspection reports, observations, and corrective action recommendations.</p></li><li><p>Review HSE documentation and monitor compliance with applicable standards and regulations.</p></li><li><p>Ensure adherence to TAQA, ADOSH, and other regulatory HSE requirements and industry best practices.</p></li><li><p>Conduct workplace inspections to identify hazards and implement preventive measures.</p></li><li><p>Investigate accidents, incidents, and near misses to determine root causes and recommend corrective actions.</p></li><li><p>Deliver safety awareness and training sessions on emergency response, hazard communication, ergonomics, and other relevant HSE topics.</p></li><li><p>Coordinate effectively with project teams, contractors, and stakeholders to maintain a strong safety culture.</p></li></ul><p><strong>Key Competencies</strong></p><ul><li><p>Strong knowledge of TAQA and ADOSH HSE requirements.</p></li><li><p>Excellent hazard identification and risk assessment skills.</p></li><li><p>Effective inspection, auditing, and compliance monitoring capabilities.</p></li><li><p>Strong reporting, documentation, and analytical skills.</p></li><li><p>Excellent communication, coordination, and leadership abilities.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education</strong></p><ul><li><p>Bachelor’s Degree in any discipline.</p></li></ul><p><strong>Experience</strong></p><ul><li><p>6–8 years of relevant HSE experience.</p></li><li><p>Minimum 3 years of experience in <strong>TAQA projects</strong>, specifically within <strong>power distribution, utilities, or infrastructure projects</strong>.</p></li></ul><br><p><strong>Professional Certifications</strong></p><ul><li><p>Diploma in Occupational Safety & Health (OSH).</p></li><li><p>NVQ/Level 6 Occupational Health & Safety Qualification.</p></li><li><p>NEBOSH Certification.</p></li><li><p>ISO 45001 Lead Auditor Certificate.</p></li><li><p>Other relevant HSE training certifications.</p></li></ul><br><p><strong>Preferred Qualifications</strong></p><ul><li><p>Previous experience with TAQA power distribution projects.</p></li><li><p>Prior TAQA Approval.</p></li><li><p>ADOSH OSH Practitioner Approval.</p></li><li><p>Valid UAE Driving License.</p></li></ul>

<p>Job Title: Quality Engineer Location: Habshan, Abu Dhabi, UAE Employment Type: Contract (6 Months – Extendable) Project Mobilization: Expected in the Last Week of July Job Purpose Exclusive Talent HR Consultancy is seeking an experienced Quality Engineer for a 6-month extendable project based in Habshan, Abu Dhabi. The successful candidate will be responsible for implementing and maintaining Quality Assurance and Quality Control (QA/QC) systems, ensuring compliance with project specifications, applicable standards, and client requirements throughout the project lifecycle. Key Responsibilities • Ensure all work is executed in accordance with project specifications, quality standards, and client requirements. • Implement and maintain Quality Assurance and Quality Control (QA/QC) procedures throughout the project. • Conduct inspections, audits, and quality surveillance to verify compliance with applicable codes, standards, and project specifications. • Review Inspection and Test Plans (ITPs), quality procedures, and related documentation. • Identify quality deviations and coordinate corrective and preventive actions. • Maintain quality records, inspection reports, test results, and compliance documentation. • Coordinate with clients, consultants, subcontractors, and suppliers on all quality-related matters. • Monitor incoming materials to ensure compliance with approved specifications. • Conduct Quality Awareness training sessions and toolbox meetings. • Support the implementation of the Integrated Management System (IMS). • Promote environmental sustainability initiatives through Reduce, Reuse, and Recycle practices. • Ensure compliance with company policies, procedures, values, vision, and mission. • Provide technical guidance to project teams on QA/QC requirements and industry best practices.</p><p>• Bachelor's Degree in Civil, Mechanical, or Electrical Engineering. • Minimum 5–8 years of QA/QC experience, preferably in Oil & Gas, Industrial, or Construction projects. • Strong knowledge of QA/QC procedures, inspection methodologies, and quality management systems. • Familiarity with relevant international standards and construction codes. • ISO 9001 Lead Auditor/Internal Auditor certification or other relevant QA/QC certifications is preferred. • Experience with QA/QC documentation and reporting systems. • Ability to interpret engineering drawings, specifications, and technical documents. • Excellent communication, organizational, and problem-solving skills. • Proficient in Microsoft Office applications. Preferred Experience • Previous experience on ADNOC, EPC, industrial, or infrastructure projects will be an advantage. • Knowledge of Integrated Management Systems (IMS) and continuous improvement practices. • Language • English: Fluent (Written and Spoken)</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> Provide the needed support for all QC functions and standards as directed by the Project Manager.</p><p><br></p><ul><li>Familiar with all types of waterproofing systems.</li><li>Proficient in QC submissions through the company’s quality control system.</li><li>Well-versed in inspection requirements, MSRA (Method Statement Risk Assessment) submissions, and all relevant testing procedures.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Minimum of 3 years of experience specifically in a QC Engineer role.</li><li>BSc Civil Engineering</li><li>Strong attention to detail and ability to maintain accurate quality documentation.</li></ul><p><br></p></div>

Hiring: Project Engineer – Building Construction | Dubai, UAE<br>Talentigence is hiring for an experienced Project Engineer – Building Construction for a construction opportunity in Dubai.<br>Location: Dubai, UAE Industry: Building Construction Employment Type: Full-time Salary: AED 8,000 – AED 12,000 per month<br>Key Responsibilities:• Assist the Project Manager in planning and executing building construction projects. • Coordinate and supervise daily site activities to ensure project milestones are achieved. • Review construction drawings, specifications and method statements. • Coordinate with consultants, subcontractors, suppliers and client representatives. • Monitor project progress and prepare daily, weekly and monthly reports. • Ensure construction works comply with project specifications, quality standards and applicable Dubai authority requirements. • Coordinate material procurement and timely delivery to site. • Resolve technical issues and provide engineering support during construction. • Monitor subcontractor performance and work progress. • Ensure compliance with HSE requirements. • Participate in inspections, testing, snagging and project handover activities.<br>Requirements:• Bachelor’s Degree in Civil Engineering. • 5–8 years of relevant building construction experience. • Minimum 3–5 years of hands-on experience in Dubai building construction projects is mandatory. • Experience in residential, commercial or mixed-use building projects. • Strong knowledge of structural, architectural and finishing works. • Familiarity with Dubai Municipality, DDA, Trakhees and other relevant authority requirements. • Proficiency in Auto CAD, Primavera P6/MS Project and MS Office. • Strong communication, coordination and problem-solving skills. • UAE Driving Licence is preferred.<br>Benefits:• Employment Visa • Medical Insurance • Annual Leave<br> • End-of-Service Benefits as per UAE Labour Law Interested candidates can send their updated CV to: ajay@talentigence.comPlease mention “Project Engineer – Dubai” in the subject line.<br>#Talentigence #Talent Intelligence #Talentwith Intelligence #Hiring #Project Engineer #Civil Engineer #Construction Jobs #Dubai Jobs #UAEJobs #Building Construction #Engineering Jobs #Dubai Careers #UAEHiring

<ul><li><p>The QA/QC Engineer is responsible for implementing and monitoring quality assurance and quality control activities for fit-out and interior design projects. The role ensures that all materials and workmanship comply with approved drawings, specifications, quality standards, and client requirements throughout the project lifecycle, from execution to final handover</p></li></ul><br><ul><li><p>Implement the Project Quality Plan (PQP) and QA/QC procedures on site.</p></li><li><p>Prepare, review, and maintain Inspection & Test Plans (ITPs) and quality checklists.</p></li><li><p>Inspect fit-out works to ensure compliance with approved drawings and specifications.</p></li><li><p>Monitor the quality of interior works, including gypsum, joinery, flooring, wall, and ceiling finishes.</p></li><li><p>Ensure only approved materials are used on site.</p></li><li><p>Coordinate quality inspections with consultants and clients.</p></li><li><p>Identify non-conformances, raise NCRs, and verify corrective actions.</p></li><li><p>Maintain accurate quality records, reports, and inspection documents.</p></li><li><p>Participate in snagging and de-snagging activities and follow up on snag closures.</p></li><li><p>Assist in the preparation and verification of as-built drawings and handover documents.</p></li><li><p>Support internal and external quality audits.</p></li><li><p>Promote quality awareness among site teams and subcontractors.</p></li><li><p>Recommend cost impacts due to quality issues for management review.</p></li><li><p>Inspect, approve, or reject workmanship and materials that do not meet quality standards.</p></li><li><p>Report quality issues and risks to the Project Manager.</p></li><li><p>Enforce approved standards and method statements on site.</p></li><li><p>Raise NCRs, observations, and quality warnings.</p></li><li><p>Prepare and verify as-built drawings and handover documentation.</p></li><li><p>Prepare and submit daily, weekly, and monthly quality reports.</p></li><li><p>Maintain quality documentation, including inspection reports, NCR logs, snag lists, and material approvals.</p></li><li><p>Issue NCRs and quality observations.</p></li><li><p>Recommend corrective actions and rework for defective works.</p></li><li><p>Temporarily stop works in cases of serious quality non-compliance.</p></li><li><p>Coordinate directly with consultants, subcontractors, and site teams on quality-related issues.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Civil Engineering, Architectural Engineering, or a related field.</p></li><li><p>3–7 years of experience in fit-out and interior finishing works.</p></li><li><p>Certification in ISO 9001 Internal Auditor or QA/QC is preferred.</p></li><li><p>Proficiency in MS Office and basic AutoCAD.</p></li><li><p>Effective communication skills with project teams, consultants, and subcontractors.</p></li><li><p>Strong attention to detail and focus on finish quality.</p></li><li><p>Ability to enforce quality standards objectively and consistently.</p></li><li><p>Capability to reject non-compliant works and stop defective activities.</p></li><li><p>Ability to manage multiple inspections, meet deadlines, and resolve problems effectively.</p></li><li><p>Ability to work under pressure in fast-track fit-out projects.</p></li><li><p>Strong knowledge of site inspection and quality control of fit-out works.</p></li><li><p>Knowledge of local authority and consultant quality requirements, including ADM, DCD, and Estidama.</p></li><li><p>Proficiency in Inspection & Test Plans (ITPs), Method Statements, and Quality Plans.</p></li><li><p>Strong knowledge of Quality Management Systems and ISO 9001 requirements.</p></li><li><p>Knowledge of interior fit-out construction methods and finishing standards, including gypsum partitions and ceilings, joinery, flooring, wall, and ceiling finishes.</p></li><li><p>Proficiency in snagging, de-snagging, and handover quality requirements.</p></li><li><p>Knowledge of NCR management, corrective actions, and preventive actions.</p></li></ul>

Whizz HR is Hiring | Senior MEP Engineer | Dubai Job Title: Senior MEP Engineer Job Type: Full-Time | On-site Location: Dubai, UAEJob Summary Whizz HR is looking for an experienced Senior MEP Engineer with strong MEP contracting and site execution experience. The ideal candidate should have a proven track record of handling MEP works for construction projects, coordinating with consultants, subcontractors, and project teams, and ensuring successful project execution within quality, cost, and schedule requirements. Candidates with Infrastructure, Consulting, or Facility Management experience will not be considered. Key Responsibilities Manage and supervise MEP works across construction projects from installation through commissioning and handover. Coordinate mechanical, electrical, and plumbing activities with project teams, subcontractors, consultants, and clients. Review MEP drawings, shop drawings, BOQs, specifications, material submittals, and technical documents. Supervise site installation and ensure works are executed according to approved drawings and project specifications. Monitor project progress, manpower, materials, and subcontractor activities. Conduct regular site inspections and ensure quality standards are maintained. Coordinate with other disciplines to identify and resolve MEP-related site issues. Manage testing, commissioning, snagging, and handover of MEP systems. Ensure compliance with UAE standards, project requirements, and HSE regulations. Prepare progress reports, inspection documentation, and project-related technical reports. Troubleshoot technical issues and provide effective engineering solutions. Coordinate with consultants and clients for inspections, approvals, and technical clarifications. Ensure MEP works are completed within the approved project schedule and budget. Requirements Bachelor's Degree in Mechanical or Electrical Engineering.5–8 years of MEP contracting experience. Strong experience in MEP contracting, site execution, and project delivery is mandatory. Experience in building/construction projects is preferred. Strong knowledge of HVAC, plumbing, firefighting, electrical, and other MEP systems. Proficiency in Auto CAD and MS Office; knowledge of Revit is an advantage. Good understanding of UAE construction standards, codes, and HSE requirements. Strong leadership, coordination, communication, and problem-solving skills. Important Experience Requirement✅ 5–8 years of MEP Contracting Experience✅ Strong Site Execution & Construction Experience✅ Experience handling subcontractors and project teams❌ Infrastructure experience will not be considered❌ Consulting experience will not be considered❌ Facility Management experience will not be considered<br>???? Interested candidates can share their CV at:hello@whizzhr.com

<ul><li><p>Holding all inspections required to identify the issues in the projects and</p></li></ul><p>create the punch list</p><ul><li><p>Review the onsite inspection requests and ensure all requests have been</p></li></ul><p>met within 48 hrs</p><ul><li><p>Report the daily progress, weekly progress and the challenges faced</p></li><li><p>Record the recurring issues and report the QA Team Lead</p></li><li><p>Record and report major issues that require escalation</p></li><li><p>Ensure that all customer snags are attended</p></li><li><p>Report any requirement by the customer that does not fall within the</p></li></ul><p>project specification and design</p><ul><li><p>Utilize necessary access to relevant systems required for operations and</p></li></ul><p>reporting functions</p><ul><li><p>Escalate unattended or disputed snags</p></li><li><p>Support with evidence and information in case of a dispute</p></li><li><p>Utilize portal and relevant systems for snagging and inspections</p></li><li><p>Provide continuous updates on handover, snagging and inspections</p></li><li><p>Verify completion and rectification of snags by the Contractor</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>3–5 years of QA experience</strong></p></li><li><p>Construction industry experience</p></li><li><p>Bachelor's/Diploma in <strong>Civil, Mechanical, or Electrical Engineering</strong></p></li><li><p>Strong knowledge of <strong>site inspections and snagging</strong></p></li><li><p>Good reporting and documentation skills</p></li><li><p>Ability to coordinate with contractors and different project teams</p></li><li><p>Good problem-solving and escalation skills</p></li></ol>

Tips: Provide a summary of the role, what success in the position looks like, and how this role fits into the organization overall.<br>Responsibilities Check materials and application quality. Ensure work follows drawings and specifications. Inspect surfaces, joints, and details. Coordinate with Main contractor and consultant and site team. Prepare inspection reports and resolve defects.<br>Qualifications Bachelor’s or Diploma in Civil Engineering

Professional Engineer (PE) license or progress toward licensure (required/preferred depending on role level) Design and analyze structural systems for buildings and other structures (concrete, steel, timber, masonry) Prepare structural calculations, drawings, specifications, and reports Ensure designs comply with local building codes, regulations, and safety standards Review architectural and construction drawings for structural feasibility Coordinate with architects, MEP engineers, and construction teams Conduct site visits and inspections to verify construction quality and compliance Identify and resolve structural design issues during design and construction phases Provide technical support during permitting and construction Review shop drawings and material submittals Bachelor’s degree in Civil or Structural Engineering

<ul><li><p>Lead QA/QC activities for civil and structural works across power project sites.</p></li><li><p>Develop, implement, and monitor project-specific Quality Assurance and Quality Control procedures.</p></li><li><p>Review project specifications, drawings, BOQs, method statements, ITPs, and applicable codes to establish quality requirements.</p></li><li><p>Prepare, review, and implement Inspection and Test Plans, Method Statements, Quality Control Plans, and checklists for civil activities.</p></li><li><p>Inspect civil works including excavation, earthworks, foundations, reinforcement, formwork, concrete, structural works, masonry, waterproofing, roads, drainage, cable trenches, and finishing works.</p></li><li><p>Ensure construction activities are executed in accordance with approved drawings, specifications, method statements, ITPs, and approved materials.</p></li><li><p>Coordinate with consultants, clients, subcontractors, construction teams, and testing laboratories for inspections, testing, and quality approvals.</p></li><li><p>Review material submittals, technical data sheets, material certificates, manufacturer documentation, and test certificates for compliance with project requirements.</p></li><li><p>Ensure incoming construction materials are inspected and approved prior to use.</p></li><li><p>Coordinate and witness testing of concrete, soil, aggregates, reinforcement steel, asphalt, waterproofing materials, and other civil construction materials.</p></li><li><p>Monitor concrete works including mix design approval, batching, pouring, slump testing, temperature checks, cube sampling, curing, and compressive strength testing.</p></li><li><p>Ensure proper inspection and approval of reinforcement, embedded items, anchor bolts, formwork, foundations, and structural elements prior to concrete placement.</p></li><li><p>Conduct regular site inspections and identify defects, non-conformities, and deviations from approved requirements.</p></li><li><p>Raise, monitor, and close Non-Conformance Reports (NCRs), Site Observation Reports, and Corrective Action Requests.</p></li><li><p>Investigate quality issues and coordinate root-cause analysis and corrective/preventive actions.</p></li><li><p>Monitor subcontractor quality performance and ensure compliance with project quality requirements.</p></li><li><p>Review and approve subcontractor quality documentation, inspection requests, method statements, and test records as applicable.</p></li><li><p>Maintain complete and accurate quality records including inspection reports, test results, material approvals, NCRs, calibration certificates, and quality checklists.</p></li><li><p>Coordinate with surveying teams to verify levels, alignment, dimensions, coordinates, and setting-out requirements.</p></li><li><p>Ensure proper control of construction tolerances and dimensional accuracy.</p></li><li><p>Monitor calibration and validity of testing and measuring equipment used for quality inspections.</p></li><li><p>Coordinate with third-party laboratories for required material testing and ensure test results meet specified acceptance criteria.</p></li><li><p>Conduct quality audits of subcontractors, suppliers, laboratories, and site activities.</p></li><li><p>Participate in internal, client, consultant, and external quality audits and ensure timely closure of audit findings.</p></li><li><p>Review as-built drawings and quality documentation to ensure they accurately reflect completed works.</p></li><li><p>Monitor project quality KPIs and prepare daily, weekly, and monthly QA/QC reports.</p></li><li><p>Provide quality inputs during construction planning, procurement, material selection, and technical coordination meetings.</p></li><li><p>Coordinate with construction and engineering teams to resolve technical and quality-related issues.</p></li><li><p>Ensure proper documentation and traceability of inspections, approvals, materials, and testing throughout the project lifecycle.</p></li><li><p>Support project handover by compiling Quality Dossiers, Inspection Records, Test Certificates, Material Certificates, and other required documentation.</p></li><li><p>Identify opportunities for continuous improvement and implement measures to reduce defects, rework, wastage, and quality-related delays.</p></li><li><p>Mentor and guide QA/QC engineers, inspectors, and site quality personnel.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Civil Engineering or a related discipline.</p></li><li><p>Typically 7–10 years of relevant QA/QC experience, preferably in power, substation, EPC, infrastructure, or large-scale construction projects.</p></li><li><p>Strong experience in civil and structural quality control for power infrastructure projects.</p></li><li><p>In-depth knowledge of civil construction materials, methods, inspection procedures, and testing requirements.</p></li><li><p>Strong understanding of ITPs, Method Statements, Quality Plans, Inspection Requests, NCRs, and Corrective/Preventive Actions.</p></li><li><p>Experience with concrete works, foundations, structural works, earthworks, roads, drainage, cable trenches, waterproofing, and finishing works.</p></li><li><p>Good knowledge of relevant international standards and specifications such as ASTM, BS, ACI, ISO, or equivalent.</p></li><li><p>Experience reviewing material submittals, material certificates, laboratory test reports, and technical documentation.</p></li><li><p>Strong knowledge of concrete testing, soil testing, reinforcement inspection, formwork inspection, and other civil quality-control processes.</p></li><li><p>Experience coordinating with clients, consultants, subcontractors, suppliers, and third-party testing laboratories.</p></li><li><p>Knowledge of ISO 9001 Quality Management Systems is required; Lead Auditor/Internal Auditor certification will be an advantage.</p></li><li><p>Strong understanding of quality documentation, inspection processes, and project handover requirements.</p></li><li><p>Proficiency in MS Office and quality management/document-control systems.</p></li><li><p>Strong analytical, communication, coordination, reporting, and problem-solving skills.</p></li><li><p>Ability to identify non-conforming work and ensure effective corrective action and timely closure.</p></li><li><p>UAE/GCC project experience is preferred.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in HV/EHV substations, transmission and distribution projects, power infrastructure, or major EPC projects.</p></li><li><p>Experience with civil works for transformer foundations, equipment foundations, control buildings, cable trenches, switchyards, roads, drainage, and associated infrastructure.</p></li><li><p>Experience working with major EPC contractors, consultants, and utility clients.</p></li><li><p>Familiarity with UAE authority/client quality requirements and inspection procedures.</p></li><li><p>Experience preparing project Quality Dossiers and supporting final project handover.</p></li><li><p>Professional certification such as CSWIP, CQI/IRCA, ISO 9001 Lead Auditor, or equivalent will be an advantage.</p></li></ul>

Candidates with a Bachelors degree in Engineering / Health, Safety or Environmental Sciences or an equivalent. Candidates with more than 10 years of experience in Oil & Gas Projects. Provides on-site HSE support and assistance to the Department team and works closely with ,Operations and Contractors to help prevent incidents and ensure successful on-site HSE program and Life Saving Rule implementation and monitoring, Responsible for observing and identifying HSE related issues that may affect the department ,facilitate to implement Company’s HSEMS requirements within the department activities to ensure the alignment to Industrial best practices & HSE Standards and guidelines to ensure a safe working environment, Responsible to review and provide the required input to finalize any HSE related documents that requires to carry out the inspection, maintenance & contractor related activities/jobs safely, Conduct Contractor Audits (Pre-mobilization, Pre-execution etc.) and HSE inspections in line with Contractor management procedure, Provide required support to ensure compliance/improvement to Maintenance Management system, AIMS, Environment compliance & Regulatory compliance, Provides support for incident investigation and HSE performance reporting.<br>Salary: AED 12,000Rotation: 28/28

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>The Senior Civil / Structural Design Engineer shall be responsible for providing civil and structural engineering design, analysis, technical review, coordination, and construction support for EPC of industrial, infrastructure, and district cooling plants. The role will ensure that all civil and structural deliverables are safe, practical, cost-effective, technically sound, and compliant with applicable project specifications, international codes, authority requirements, and client expectations from concept design through construction and handover.</p><br>Your role<ul><li>Carry out structural analysis, design, and detailing of reinforced concrete, precast concrete, and be specialized in structural steel along with RCC structures and Pre-cast element design for industrial buildings, district cooling plants, utility facilities, and related infrastructure projects.</li><li>Prepare and review civil and structural designs in accordance with project specifications, client requirements, authority regulations, and applicable international codes and standards, including Dubai Municipality requirements, SBC, IBC, ACI, ASCE, AISC, UBC, and other relevant standards.</li><li>Evaluate structural systems for the applicable design loads and service conditions including loads due to wind, seismic, vibration, equipment, thermal, hydrostatic etc</li><li>Develop structural designs for pipe supports, pipe racks, sleepers, platforms, steel frames, equipment supports, steel-to-steel connections, and steel-to-concrete connections.</li><li>Perform static and dynamic analysis and design of equipment foundations for static and rotating equipment, including foundations for pumps, chillers, FRP / GLS water tanks etc.</li><li>Prepare design calculations and engineering deliverables for buildings, equipment foundations, valve chambers, concrete water tanks, retaining structures, boundary walls, fencing, gates, site security structures, and other related civil works.</li><li>Coordinate civil site development works including grading, roads, drainage, underground utilities, external works, and interface requirements with other engineering disciplines.</li><li>Prepare, review, and update Design Basis Reports, civil and structural design basis documents, architectural design basis documents, technical specifications, scope documents, design calculations, sketches, IFC drawings, and other project deliverables.</li><li>Develop concept, schematic, detailed design, tender, and construction-stage engineering packages, ensuring completeness, constructability, quality, and compliance with project requirements.</li><li>Provide technical design inputs to tendering and estimation teams for EPC and design-and-build district cooling plant bids based on conceptual architectural layouts, plant layouts, and tender documents.</li><li>Review subcontractor technical submissions, including shop drawings, design calculations, method statements, material submittals, inspection and test plans, and related engineering documents.</li><li>Respond to subcontractor technical queries, clarify subcontract scope requirements, obtain technical compliance confirmations, and support the preparation and finalization of technical bid evaluations.</li><li>Prepare technical responses and justifications to client comments and comment response sheets to support approval of design basis documents, calculation notes, IFC drawings, and material submittals.</li><li>Prepare scopes of work for specialist subcontractors and service providers, including geotechnical investigation, topographical survey, and related civil engineering services.</li><li>Review and interpret geotechnical reports, soil investigation results, topographical survey information, and test results, and incorporate relevant findings into the civil and structural design.</li><li>Ensure required inspections and tests are carried out in accordance with project specifications, inspection and test plans, quality procedures, and approval workflows.</li><li>Coordinate with architects, mechanical engineers, electrical engineers, project managers, construction teams, consultants, clients, subcontractors, local authorities, government bodies, and other stakeholders to resolve design interfaces and secure required approvals.</li><li>Prepare and support authority submissions and approvals, including technical discussions with local municipalities and other approving authorities, as applicable.</li><li>Attend technical, progress, quality, safety, tender, and coordination meetings with clients, consultants, contractors, subcontractors, and project stakeholders.</li><li>Provide technical support during construction, respond to site queries, review field issues, and assist construction teams in resolving civil and structural engineering matters.</li><li>Maintain effective communication with project managers and project stakeholders to ensure timely delivery of engineering outputs in line with project schedules, quality requirements, and project objectives.</li></ul>About you<p><b>Minimum Qualifications and Experience</b></p><br><ul><li>Bachelor’s degree in Civil Engineering, Structural Engineering, or a related engineering discipline.</li><li>Professional engineering registration, chartership, or equivalent certification is preferred.</li><li>Minimum 10 years of relevant civil and structural engineering design experience, preferably within EPC, industrial, infrastructure, utility, district cooling, or building projects.</li><li>Demonstrated experience in delivering engineering outputs from concept design through detailed design, tender support, authority approval, construction support, and handover.</li></ul><p><b>Technical Skills and Competencies</b></p><br><ul><li>Strong technical knowledge of reinforced concrete, precast concrete, structural steel, foundation systems, retaining structures, water-retaining structures, and structural connections.</li><li>Proficiency in structural analysis and design software such as ETABS, SAFE, SAP2000, STAAD-Pro, Prokon, and other relevant civil and structural engineering tools.</li><li>Working knowledge of BIM and drafting platforms such as Revit, AutoCAD, and related design coordination tools.</li><li>Ability to independently prepare, check, and review design calculations, technical reports, drawings, specifications, schedules, and engineering documentation.</li></ul><p><b>Preferred Experience and Industry Exposure</b></p><br><ul><li>Experience in civil and structural design for industrial buildings, district cooling plants, utility facilities, process plants, infrastructure works, and related civil structures.</li><li>Experience coordinating with engineering consultants, clients, contractors, subcontractors, local authorities, and government approval agencies.</li><li>Experience working within EPC, design-and-build, or fast-track project environments from tender stage through project execution.</li><li>Experience preparing technical inputs for bids, design presentations, authority submission packages, client approval documentation, and subcontractor technical evaluations.</li><li>Experience working in multicultural, multidisciplinary, and multilingual project environments.</li></ul><p><b>Behavioral Competencies</b></p><br><ul><li>Demonstrates a detail-oriented, analytical, and quality-focused approach to engineering design and technical review.</li><li>Displays strong problem-solving capability and sound engineering judgment when resolving design and construction-related issues.</li><li>Communicates effectively with internal teams, clients, consultants, subcontractors, and authorities.</li><li>Capable of handling pressure while working collaboratively &amp; productively in multidisciplinary project teams while maintaining accountability for assigned engineering deliverables.</li><li>Plans and prioritizes work effectively to meet project schedules, quality requirements, and stakeholder expectations.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

<p>Job Description: We are seeking a detail-oriented and proactive QA/QS Engineer to join our client’s team. The ideal candidate will have 1–3 years of experience in construction or industrial projects, with hands-on exposure to both QA/QC documentation and Quantity Surveying activities. The candidate will be responsible for ensuring quality compliance, managing project documentation, supporting quantity verification, and assisting with commercial activities including measurements, billing, variations, and cost tracking. Key Responsibilities: QA/QC Responsibilities: - Prepare and submit QA/QC documentation including Method Statements, Inspection & Test Plans (ITPs), RFIs, MIRs, WIRs, and other quality-related documents. - Ensure project activities comply with approved drawings, specifications, quality standards, and client requirements. - Maintain accurate records of inspections, approvals, test results, material certifications, and project documentation. - Coordinate with site teams for inspection requests and approvals. - Follow up on material approvals, testing reports, and quality documentation. - Support internal audits and ensure timely closure of NCRs. - Ensure compliance with project quality and safety standards. QS / Commercial Responsibilities: - Prepare and verify BOQ quantities based on drawings and project requirements. - Perform quantity take-offs and monitor work progress against BOQ. - Assist in preparation of interim payment applications. - Support preparation of variation orders (VO), claims, and cost tracking. - Verify subcontractor measurements, quantities, and invoices. - Maintain accurate records for measurements, billing, and commercial documentation.</p><p>Candidate Requirements: - Bachelor’s Degree in Civil Engineering. - 1–3 years of experience in QA/QC and Quantity Surveying roles within construction or industrial projects. - Knowledge of QA/QC procedures, documentation control, and project specifications. - Experience with quantity take-off, BOQ preparation, payment applications, and variations. - Familiarity with construction drawings, standards, and quality requirements. - Proficiency in MS Office (Excel, Word). - QA/QC or Quantity Surveying certifications will be an added advantage. Key Skills: - Strong attention to detail and accuracy. - Excellent communication and coordination skills. - Ability to manage multiple priorities in a fast-paced environment. - Strong analytical and problem-solving abilities. - Proactive approach with good teamwork skills.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a motivated and energetic <b>Junior HVAC / Mechanical Engineer</b> to join our site engineering team. This is an excellent entry-level opportunity for a fresh graduate or an engineer with up to 2 years of experience looking to build a strong foundation in MEP construction, HVAC installation, and site supervision.</p><p>Working under the guidance of Senior Mechanical Engineers, you will assist in site execution, reviewing shop drawings, monitoring sub-contractors, and ensuring HVAC installations comply with design specifications and project schedules.</p><p><br></p><p><b>Key Responsibilities</b></p><ul><li><b>Site Supervision &amp; Coordination:</b> Assist senior engineers in daily site inspections to monitor the installation of HVAC ductwork, chilled water piping, AHUs, FCUs, and ventilation systems.</li><li><b>Drawing &amp; Design Support:</b> Prepare AutoCAD shop drawings, schematic diagrams, and material submittals against project specifications and local codes (ASHRAE, SMACNA).</li><li><b>Material Management:</b> Track site material deliveries, inspect incoming HVAC equipment for quality, and prepare daily site progress logs and quantity take-offs.</li><li><b>Testing &amp; Inspection:</b> Participate in Joint Site Inspections with client consultants and assist during the testing, adjusting, and balancing (TAB) of HVAC systems.</li><li><b>Safety &amp; Compliance:</b> Support site safety compliance by ensuring technicians and subcontractors strictly follow Health, Safety, and Environment (HSE) protocols.</li><li><b>Documentation:</b> Prepare daily and weekly progress reports, site queries (RFIs), and maintain accurate project record logs.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Soft Skills &amp; Work Ethic:</b></p><p><b>Site Adaptability:</b> Willingness to work outdoors on active construction sites alongside foremen, technicians, and subcontractors.</p><p><b>Communication &amp; Technical English:</b> Ability to write clear Request for Information (RFI) drafts, site logs, and status updates.</p><p><b>Problem-Solving &amp; Curiosity:</b> Proactively asking senior engineers <i>why</i> a design is chosen or <i>how</i> a site conflict can be resolved.</p><p><br></p><p><b>Software &amp; Drafting Capabilities</b></p><ul><li><b>AutoCAD (Critical):</b> Must be able to read, edit, layer, and modify 2D MEP shop drawings, duct layouts, and piping schematics.</li><li><b>HAP (Hourly Analysis Program):</b> Basic exposure to Carrier HAP or Elite for entering room dimensions and wall materials to estimate cooling loads.</li><li><b>MS Office (Excel/Word):</b> Intermediate Excel skills for preparing quantity take-offs (MTO), site daily reports, and inspection logs.</li></ul><p><br></p></div>

<ul><li>Oversee daily construction activities, ensuring adherence to project plans and specifications while managing on-site teams effectively.</li><li>Conduct regular inspections of work sites to maintain quality standards and ensure compliance with safety regulations and building codes.</li><li>Collaborate with architects and engineers to resolve design issues, ensuring that all modifications are documented and executed accurately.</li><li>Prepare and maintain detailed daily reports on project progress, including labor, materials used, and any discrepancies encountered.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Civil Engineering or a related field, providing a solid foundation in engineering principles and practices.</p></li><li><p>A minimum of 5 years of relevant site engineering experience, demonstrating a track record of on-site project management and execution.</p></li><li><p>Possession of a valid engineering license or certification, such as Chartered Engineer (CEng) or Professional Engineer (PE), showcasing professional credibility.</p></li><li><p>Proven experience in construction management software (e.g., AutoCAD, Primavera, or MS Project), enhancing planning and execution capabilities.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Structural Engineer - Offshore Subsea Project - Pkg 2<br><br><p><b><i>Belong, Connect, Grow, with KBR!</i></b></p><br><br><p><b><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</i></b></p><br><br><p><b><u>&nbsp;Job Title: Lead Structural Engineer </u></b> </p><br><br><p>KBR is growing its Project Management Consultancy (PMC) team for an exciting, high profile offshore development in Abu Dhabi. The ADNOC PMC project role would be based initially in Client or Contractors Office in Abu Dhabi.</p><br><br><p><b>Job Purpose</b></p><br><br><p>The Lead Structural Engineer is responsible for leading structural engineering activities for offshore oil and gas facilities, ensuring the safe, reliable, and cost-effective design, assessment, modification, and execution of offshore structures. The role provides technical leadership throughout Concept, FEED, Detailed Engineering, EPC, Installation, and Brownfield project phases while ensuring compliance with ADNOC standards, international codes, HSE requirements, and project objectives.</p><br><br><p><b>Key Responsibilities</b></p><br><br><p><b>Structural Engineering Leadership</b></p><br><br><ul><li>Lead structural engineering design and analysis for offshore platforms, jackets, topsides, bridges, flare structures, monopods, subsea support structures, and associated facilities.</li><li>Manage and supervise structural engineering teams and coordinate with multidisciplinary project teams.</li><li>Review and approve structural engineering deliverables and ensure compliance with ADNOC and international standards.</li><li>Provide technical guidance and mentorship to structural engineers and designers.</li></ul><p><b>Offshore Structural Design &amp; Analysis</b></p><br><br><ul><li>Perform and review:<ul><li>Structural analysis and design calculations.</li><li>In-place analyses of offshore structures.</li><li>Fatigue and fracture mechanics assessments.</li><li>Seismic and environmental load assessments.</li><li>Transportation and installation analyses.</li><li>Load-out and lifting studies.</li><li>Structural integrity assessments.</li></ul></li><li>Review structural drawings, steel detailing, and fabrication packages.</li><li>Ensure structures can withstand operational, environmental, transportation, and installation loads.</li></ul><p><b>Brownfield &amp; Integrity Management</b></p><br><br><ul><li>Conduct structural assessments for aging offshore assets and brownfield modifications.</li><li>Evaluate structural integrity, life extension, and fitness-for-service requirements.</li><li>Review inspection findings and recommend repair, strengthening, or replacement solutions.</li><li>Support asset integrity management programs and risk-based inspection initiatives.</li></ul><p><b>Project Execution Support</b></p><br><br><ul><li>Participate in Concept, FEED, Detailed Engineering, EPC, and offshore construction projects.</li><li>Review contractor and consultant engineering deliverables.</li><li>Support procurement activities including technical bid evaluations and supplier assessments.</li><li>Provide technical support during fabrication, load-out, transportation, offshore installation, and commissioning.</li></ul><p><b>HSE &amp; Risk Management</b></p><br><br><ul><li>Ensure compliance with ADNOC HSE standards and offshore safety requirements.</li><li>Participate in HAZID, HAZOP, Constructability Reviews, SIMOPS, and Risk Assessments.</li><li>Identify technical risks and develop mitigation strategies.</li><li>Promote safety, quality, and engineering excellence throughout project execution.</li></ul><p><b>Stakeholder Management</b></p><br><br><ul><li>Interface with ADNOC Offshore operations teams, EPC contractors, consultants, classification societies, and third-party agencies.</li><li>Present technical solutions and engineering recommendations to management and project stakeholders.</li><li>Support project reviews, audits, and technical assurance activities.</li></ul><br><p><b>Minimum Qualifications</b></p><br><br><ul><li>Bachelor’s Degree in Civil Engineering or Structural Engineering.</li><li>Master’s Degree in Structural Engineering is preferred.</li><li>Chartered Engineer (CEng), Professional Engineer (PE), or equivalent certification is highly desirable.</li></ul><br><p><b>Experience Requirements</b></p><br><br><ul><li>Minimum <b>15 years</b> of structural engineering experience in the oil and gas industry.</li><li>At least <b>5 years</b> in a Lead Structural Engineer or Senior Structural Engineer role.</li><li>Extensive experience in offshore platform design and analysis.</li><li>Strong experience in FEED, EPC, offshore construction, and brownfield projects.</li><li>ADNOC Offshore or Middle East offshore project experience preferred.</li></ul><br><p><b>Technical Competencies</b></p><br><br><p><b>Offshore Structural Engineering</b></p><br><br><ul><li>Fixed offshore platforms (Jackets &amp; Topsides)</li><li>Structural steel design</li><li>Foundation and pile design</li><li>Offshore transportation and installation engineering</li><li>Fatigue and life extension assessments</li><li>Structural integrity management</li><li>Brownfield structural modifications</li><li>Lifting and load-out studies</li></ul><p><b>Structural Analysis</b></p><br><br><ul><li>Linear and nonlinear analysis</li><li>Dynamic analysis</li><li>Seismic analysis</li><li>Blast-resistant design</li><li>Impact assessment</li><li>Fatigue analysis</li><li>Environmental loading analysis</li></ul><p><b>Codes &amp; Standards</b></p><br><br><ul><li>ADNOC Engineering Standards</li><li>API RP 2A / API Offshore Standards</li><li>ISO 19902 Offshore Structures</li><li>DNV Standards</li><li>AISC Steel Design Codes</li><li>ASCE Standards</li><li>BS EN Eurocodes (preferred)</li></ul><p><b>Software Skills</b></p><br><br><ul><li>SACS</li><li>STAAD Pro</li><li>SESAM</li><li>ANSYS</li><li>SAP2000</li><li>GT STRUDL</li><li>AutoCAD</li><li>Navisworks</li><li>Microsoft Office Suite</li></ul><br><p><b>Behavioral Competencies</b></p><br><br><ul><li>Strong leadership and technical decision-making skills.</li><li>Excellent analytical and problem-solving abilities.</li><li>Effective stakeholder management and communication skills.</li><li>Strong planning and organizational capability.</li><li>Team mentoring and development skills.</li><li>Commitment to HSE and engineering excellence.</li></ul><br><br><br> </div>

<ul><li><p>Plan and supervise civil construction activities for power projects, substations, utility buildings, and associated infrastructure.</p></li><li><p>Review approved drawings, specifications, BOQs, method statements, and construction documents prior to execution.</p></li><li><p>Coordinate with Project Managers, Construction Managers, Electrical and MEP teams to ensure smooth execution of multidisciplinary works.</p></li><li><p>Supervise civil works including excavation, earthworks, foundations, structural concrete, buildings, roads, drainage, cable trenches, retaining structures, and external works.</p></li><li><p>Ensure construction activities are executed in accordance with approved drawings, specifications, method statements, and project schedules.</p></li><li><p>Coordinate setting out, surveying, excavation, reinforcement, formwork, concreting, masonry, waterproofing, finishing, and related activities.</p></li><li><p>Monitor site progress and ensure civil activities meet planned milestones and project deadlines.</p></li><li><p>Prepare daily and weekly progress updates and highlight delays, constraints, and required corrective actions.</p></li><li><p>Coordinate with subcontractors and ensure proper deployment of manpower, materials, equipment, and resources.</p></li><li><p>Review subcontractor work plans, method statements, inspection requests, and construction procedures.</p></li><li><p>Inspect completed and ongoing works to ensure compliance with approved drawings and quality requirements.</p></li><li><p>Coordinate with QA/QC teams for inspections, testing, approvals, and closure of inspection requests and non-conformance reports.</p></li><li><p>Ensure proper quality control of concrete, reinforcement, structural works, earthworks, waterproofing, and finishing works.</p></li><li><p>Coordinate material requirements with procurement and stores teams and ensure timely availability of approved construction materials.</p></li><li><p>Review material submittals and ensure materials used at site comply with approved specifications.</p></li><li><p>Coordinate with surveyors for setting out, levels, alignment, and dimensional accuracy of civil works.</p></li><li><p>Identify design discrepancies, site constraints, and technical issues and raise RFIs/technical queries for timely resolution.</p></li><li><p>Coordinate civil interfaces with electrical, mechanical, MEP, and other project disciplines.</p></li><li><p>Ensure construction activities comply with applicable UAE standards, project specifications, authority requirements, and client requirements.</p></li><li><p>Monitor quantities, productivity, wastage, and resource utilization and support effective cost control.</p></li><li><p>Assist in reviewing BOQs, variations, additional works, and quantities for civil construction activities.</p></li><li><p>Support preparation of project schedules, look-ahead plans, manpower plans, and construction programs.</p></li><li><p>Ensure compliance with project HSE requirements, risk assessments, method statements, and safe working practices.</p></li><li><p>Conduct regular site inspections and toolbox/coordination meetings as required.</p></li><li><p>Coordinate with consultants, clients, authorities, subcontractors, and suppliers to resolve technical and construction-related issues.</p></li><li><p>Monitor snagging and rectification works and ensure timely closure of outstanding items.</p></li><li><p>Maintain proper construction records, inspection reports, test results, as-built information, and other project documentation.</p></li><li><p>Support testing, commissioning, project completion, and final handover activities.</p></li><li><p>Mentor junior engineers, supervisors, and site personnel and provide technical guidance.</p></li><li><p>Identify opportunities for improving construction methods, productivity, quality, and cost efficiency.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Civil Engineering or a related discipline.</p></li><li><p>Typically 7–10 years of relevant civil construction experience, preferably in power, substation, EPC, infrastructure, or industrial projects.</p></li><li><p>Strong experience in civil construction and site execution for large-scale projects.</p></li><li><p>Experience with foundations, reinforced concrete structures, buildings, roads, drainage, cable trenches, earthworks, and external works.</p></li><li><p>Good knowledge of construction methods, materials, specifications, quality control, and site engineering practices.</p></li><li><p>Ability to read and interpret civil, structural, architectural, and multidisciplinary engineering drawings.</p></li><li><p>Experience coordinating with consultants, clients, subcontractors, vendors, and multidisciplinary project teams.</p></li><li><p>Knowledge of QA/QC procedures, inspection and testing requirements, and preparation of method statements and ITPs.</p></li><li><p>Understanding of project planning, scheduling, resource management, quantity measurement, and cost control.</p></li><li><p>Knowledge of relevant UAE construction standards, regulations, and authority requirements is preferred.</p></li><li><p>Proficiency in MS Office and construction/project management software.</p></li><li><p>Working knowledge of AutoCAD and other relevant engineering tools.</p></li><li><p>Strong leadership, communication, coordination, analytical, and problem-solving skills.</p></li><li><p>Ability to work effectively under pressure and meet demanding project schedules.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience in power substations, transmission/distribution projects, utility infrastructure, or EPC projects.</p></li><li><p>Experience with civil works for HV/EHV substations, including equipment foundations, control buildings, cable trenches, roads, drainage, fencing, and associated infrastructure.</p></li><li><p>UAE/GCC project experience is preferred.</p></li><li><p>Experience with major EPC contractors, consultants, or utility clients will be an advantage.</p></li><li><p>Knowledge of DEWA, TAQA/TRANSCO, or other UAE utility/client requirements is desirable.</p></li></ul><br><p><strong>Interview Details</strong></p><br><p><strong>Date: Sat - Sun, 5th - 6th September 2026</strong></p><p><strong>Time: 10:00 AM to 4:00 PM</strong></p><p><strong>Venue: Swissotel, Al Murjan Hall 1 & 2, Umar Bin Al Khattab Road, Deira Dubai</strong></p><br><p><strong>Documents Required</strong></p><ul><li><p><strong>CV</strong></p></li><li><p><strong>Passport Copy</strong></p></li><li><p><strong>Educational Certificate</strong></p></li><li><p><strong>Experience Certificates</strong></p></li><li><p><strong>Utility Approvals</strong></p></li></ul>

<ul><li>Oversee the planning, execution, and completion of civil maintenance projects, ensuring adherence to schedules and budgets.</li><li>Conduct regular inspections of infrastructure, identifying potential issues and proactively implementing preventative maintenance strategies.</li><li>Manage and coordinate a team of technicians and contractors, providing technical guidance and performance oversight.</li><li>Develop and maintain detailed maintenance records, including work orders, inspection reports, and asset history.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Expatriates: Diploma/Bachelors in Civil Engineering (Minimum 6 years experience)</p></li><li><p>Experience in civil maintenance of buildings with a reputed construction/maintenance firm.</p></li><li><p>Shall execute preventive/corrective civil maintenance tasks of buildings preferably transmission substations with adequate safety.</p></li><li><p>Shall have thorough knowledge of Civil maintenance of buildings including their design, specification and maintenance.</p></li><li><p><strong>UAE driving license holder mandatory</strong> with adequate computer proficiency preferably in SAP.</p></li></ul>