وظائف مهندس معماري - العين الإمارات

<ul><li><p>Conduct inspections of lifting equipment and lifting accessories</p></li><li><p>Inspect cranes, hoists, slings, shackles, hooks and other lifting accessories</p></li><li><p>Conduct inspections of earth-moving machinery, including excavators, loaders, backhoe loaders, bulldozers, graders, rollers and dumpers</p></li><li><p>Perform visual, functional and operational inspections according to approved procedures</p></li><li><p>Verify equipment identification, documents, safe working load, safety devices and general condition</p></li><li><p>Identify defects, unsafe conditions and non-conformities</p></li><li><p>Prepare clear and accurate inspection reports and certificates</p></li><li><p>Maintain proper inspection records, photographs and supporting evidence</p></li><li><p>Ensure inspection tools and measuring equipment have valid calibration</p></li><li><p>Follow company procedures, applicable standards and client safety requirements</p></li><li><p>Maintain impartiality, confidentiality and professional conduct</p></li><li><p>Report immediately any equipment presenting a serious safety risk</p></li><li><p>Coordinate with clients, site representatives and the Technical Manager</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering – mandatory</p></li><li><p>Minimum 2 years of relevant inspection experience</p></li><li><p>Practical experience in inspecting lifting equipment and lifting accessories</p></li><li><p>Practical experience in inspecting earth-moving machinery</p></li><li><p>Knowledge of applicable inspection standards, safety requirements and manufacturer instructions</p></li><li><p>Ability to identify defects and prepare accurate inspection reports</p></li><li><p>LEEA qualification will be an advantage</p></li><li><p>Knowledge of ISO/IEC 17020 requirements will be an advantage</p></li><li><p>Good English communication and technical report-writing skills</p></li><li><p>Able to work independently at different client sites</p></li><li><p>Immediate joiners will be preferred</p></li></ul>

<p>To establish planning and project controls across building construction projects by implementing robust scheduling frameworks, monitoring performance, and ensuring timely, cost-effective project delivery. The role provides strategic direction, ensures alignment with contractual requirements, and enables informed decision-making through accurate forecasting, reporting, and risk analysis.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>1. Project Planning & Scheduling</strong></p><ul><li><p>Prepare detailed project schedules using tools such as Primavera & CCS Candy</p></li><li><p>Develop baseline programs in line with contract requirements</p></li><li><p>Define work breakdown structure (WBS) and project milestones</p></li><li><p>Establish project timelines, resource plans, and sequencing of activities</p></li></ul><p><br></p><p><strong>2. Progress Monitoring & Reporting</strong></p><ul><li><p>Implement project control systems to track progress, productivity, and performance</p></li><li><p>Monitor actual progress against planned schedules and identify variances</p></li><li><p>Lead schedule updates, critical path analysis, and performance measurement</p></li><li><p>Provide early warning signals and recommend corrective actions</p></li></ul><p><br></p><p><strong>3. Delay Analysis & Claims</strong></p><ul><li><p>Lead delay analysis </p></li><li><p>Review and validate subcontractor schedules and claims</p></li><li><p>Support commercial and contract teams in dispute resolution</p></li><li><p>Ensure all planning-related documentation meets contractual standards</p></li></ul><p><br></p><p><strong>4. Coordination & Stakeholder Management</strong></p><ul><li><p>Coordinate with project managers, engineering, procurement, and site teams</p></li><li><p>Interface with clients, consultants, and subcontractors on planning matters</p></li><li><p>Lead planning review meetings and progress discussions</p></li></ul><p><br></p><p><strong>5. Resource & Cost Planning</strong></p><ul><li><p>Align project schedules with resource and cost plans</p></li><li><p>Monitor manpower, equipment, and material utilisation</p></li><li><p>Support cash flow forecasting and cost control initiatives</p></li><li><p>Identify optimisation opportunities to improve efficiency</p></li></ul><p><br></p><p><strong>6. Risk Management</strong></p><ul><li><p>Identify potential project risks and delays</p></li><li><p>Develop mitigation and recovery plans</p></li><li><p>Monitor critical path and key project constraints</p></li></ul><p><br></p><p><strong>Skills & Competencies:</strong></p><ul><li><p>Advanced proficiency in <strong>Primavera and CCS Candy</strong> is mandatory</p></li><li><p>Strong knowledge of planning methodologies, cost and project control systems</p></li><li><p>Expertise in project analysis techniques</p></li><li><p>Strong sense of responsibility and discipline</p></li></ul>

<p>We are looking for a hands-on full stack developer to help build and improve a detection software system with multiple features such as detection, classification, and counting objects from 3D point cloud data end to end. This is a full-time, on-site Software Engineer/developer role based in Al Ain , United Arab Emirates. Daily responsibilities include implementing back-end services and APIs, writing clean and testable code, integrating software with hardware and third-party platforms, and troubleshooting issues in production environments. The role involves collaborating with cross-functional teams, contributing to system to technical documentation, and participating in code reviews and continuous improvement initiatives. The Software Engineer/developer will also help ensure that solutions remain secure, scalable, and aligned with client requirements and industry standards.</p><p>Responsibilities: • Build and maintain the LiDAR pipeline in Go and Python. • Develop and improve object detection, classification, and counting. • Build the React.js dashboard for visualizing point clouds and results. • Optimize the pipeline for speed, accuracy, and reliability. • Write clean, tested code and help shape technical decisions. Qualifications needed : • Strong, practical experience with Go and Python. • Solid experience building web interfaces with React.js. • Working knowledge of computer vision or 3D / point cloud data. • Ability to do basics of software analysis • Understanding of object detection and classification techniques. • Bachelor’s degree in Computer Science, Software Engineering, or a related technical field, or equivalent practical experience. • Strong problem-solving abilities, attention to detail, and the capacity to work effectively in a diverse, on-site team environment. • Good written and verbal communication skills in English; knowledge of Arabic is a plus. Nice to Have: • Experience with LiDAR or other sensor data. • Experience with ML frameworks such as PyTorch or TensorFlow. • Experience with point cloud tools such as PCL or Open3D. • Familiarity with AI coding assistants such as Claude Code.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and analyze civil infrastructure projects, ensuring compliance with safety and environmental regulations.</li><li>Prepare detailed project plans, including timelines, budgets, and resource allocation, to ensure successful project execution.</li><li>Conduct site inspections and assessments to evaluate project feasibility and compliance with design specifications.</li><li>Collaborate with multidisciplinary teams, including architects and urban planners, to integrate civil engineering solutions into larger projects.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Civil Engineering from an accredited institution is mandatory, with a preference for candidates holding a Master's degree.</li><li>Professional Engineer (PE) license is highly desirable, demonstrating commitment to the highest engineering standards.</li><li>At least 5 years of relevant work experience in civil engineering projects, showcasing progressive responsibility and technical expertise.</li><li>Experience in specific industries such as transportation, water resources, or structural engineering is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and analyze civil infrastructure projects, ensuring compliance with safety and environmental regulations.</li><li>Prepare detailed project plans, including timelines, budgets, and resource allocation, to ensure successful project execution.</li><li>Conduct site inspections and assessments to evaluate project feasibility and compliance with design specifications.</li><li>Collaborate with multidisciplinary teams, including architects and urban planners, to integrate civil engineering solutions into larger projects.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Civil Engineering from an accredited institution is mandatory, with a preference for candidates holding a Master's degree.</li><li>Professional Engineer (PE) license is highly desirable, demonstrating commitment to the highest engineering standards.</li><li>At least 5 years of relevant work experience in civil engineering projects, showcasing progressive responsibility and technical expertise.</li><li>Experience in specific industries such as transportation, water resources, or structural engineering is preferred.</li></ul><p></p></section>

<p>The role involves working on projects associated with Sewage & Stormwater, Flood Alleviation, Wastewater Networks and Water distribution networks Pumping Station, Recycling Plant and rehabilitation works. This will involve undertaking investigations, planning, designing, tendering, contract administration and construction supervising & monitoring.</p><p>Key accountabilities for this position include but are not limited to:</p><br><ul><li><p>Technical Delivery:</p></li></ul><p>Interacting with clients and contractor staff to determine and verify project requirements.</p><p>Preparing inspection reports and site records.</p><p>Performing civil and structural tests.</p><p>Providing general inspection on all construction labor and subcontracted tasks to ensure professional workmanship.</p><p>Identifying non-conforming works, generating reports and corrective actions, and coordinating responses.</p><p> Performs other responsibilities associated with this position as may be appropriate.</p><br><ul><li><p>Collaboration and working as part of a team.</p><br></li></ul><p> Work in conjunction with engineers to solve project design problems, support performing basic design calculations as required.</p><p>Conduct technical, feasibility studies and site investigations.</p><p>Liaison with teams working remotely from other parts of the world to facilitate completion of tasks, and project.</p><p>Excellent verbal and written English communication skills.</p><p>Experienced in the survey work with modern instruments and in keeping site measurement records</p><br><ul><li><p>Client Service Management</p><br></li></ul><p> Internal and external client liaison</p><p> Ability to build and maintain lasting and positive relationships.</p><p> Experience in utility diversions and management.</p><p>Proficient in software i.e. excel and MS word</p><br><ul><li><p>Follow safe work practices and adhere to company guidelines and policies for planning and executing work in a safe manner.</p><br></li></ul><p>Complete all work in line with Stantec Core Values and in accordance with the Stantec Quality Systems and Project Quality Procedures.</p><p>Design for safety, i.e., Construction Design Management.</p><br><ul><li><p>Other duties as requested from time to time by the Assistant Resident Engineer.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>The Inspector must have relevant technical qualification and must have not less than 5 years' experience in miscellaneous Sewage / Sewerage rehab work projects and supervision of infrastructure works.</p></li><li><p>Must have a Diploma/Degree in Civil.</p></li><li><p>Must be well experienced in the survey work with modern instruments and in keeping site measurement records.</p></li><li><p>Experience in identifying non-conforming works, generating reports and corrective actions and coordinating responses.</p></li><li><p>Excellent verbal and written English communication skills.</p></li></ul>

<p>We are seeking an experienced and detail-oriented Material / QA/QC Engineer to join our Bridge Maintenance Project team for Al Ain Municipality. The successful candidate will be responsible for ensuring that all materials, workmanship, inspections, and quality control procedures comply with project specifications, municipal standards, and relevant international codes. The ideal candidate must have strong experience in civil infrastructure and bridge maintenance projects within the UAE and be capable of coordinating effectively with consultants, subcontractors, suppliers, and site teams. Key Responsibilities QA/QC Responsibilities 1) Implement and maintain the Project Quality Management System (QMS). 2) Ensure all site activities comply with approved method statements, specifications, drawings, and quality standards. 3) Conduct inspections and quality checks for bridge maintenance and rehabilitation works. 4) Prepare and maintain Inspection Requests (IRs), Material Inspection Requests (MIRs), checklists, and quality records. 5) Coordinate with consultants and Al Ain Municipality representatives for inspections and approvals. 6) Monitor non-conformance reports (NCRs) and ensure corrective and preventive actions are implemented. 7) Review subcontractor quality documentation and ensure compliance with project requirements. 8) Ensure all testing activities are carried out as per approved standards and procedures. Material Engineering Responsibilities 1) Review and approve material submittals in coordination with the consultant/client requirements. 2) Verify that all construction materials comply with approved specifications and standards. 3) Coordinate material testing activities with approved laboratories. 4) Maintain proper records of material approvals, test reports, and certifications. 5) Monitor storage, handling, and usage of materials at site. 6) Ensure timely availability of approved materials to support project progress. Site Coordination 1) Conduct regular site inspections and quality audits. 2) Liaise with project engineers, site supervisors, and subcontractors to resolve quality-related issues. 3) Support the project team in achieving project milestones while maintaining quality standards. 4) Prepare daily, weekly, and monthly QA/QC reports.</p><p>1) Bachelor’s Degree in Civil Engineering. 2) Minimum 5–8 years of UAE experience in QA/QC and material engineering for infrastructure or bridge maintenance projects. 3) Experience working on Municipality, DOT, or infrastructure maintenance projects in the UAE is highly preferred. 4) Strong knowledge of QA/QC procedures, material testing standards, and civil engineering specifications. 5) Familiarity with bridge maintenance, rehabilitation, and structural repair works. 6) Good understanding of ISO standards and quality management systems. 7) Proficient in MS Office and preparation of QA/QC documentation. 8) Strong communication and coordination skills.+ 9) Valid UAE Driving License. 10) Must own a vehicle for site visits and project coordination. 11) Willingness to work across various project locations within the Al Ain Municipality area.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare architectural drawings, plans, and detailed design documentation</p></li><li><p>Develop 3D models and high-quality architectural visualizations</p></li><li><p>Handle interior design concepts and presentation renders</p></li><li><p>Work independently on assigned projects with minimal supervision</p></li><li><p>Coordinate with project requirements and design standards</p></li><li><p>Attend client meetings and coordinate with municipality authorities for project-related discussions, approvals, and submissions</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>2–5 years of architectural experience</p></li><li><p>Experience in Al Ain / Abu Dhabi projects preferred</p></li><li><p>Strong design, visualization, and presentation skills</p></li><li><p>Ability to manage multiple tasks independently</p></li><li><p>Creative, detail-oriented, and technically strong</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Analyze technical specifications and blueprints to ensure accurate material and electrical component selection for construction projects.</p></li><li><p>Provide expert technical advice to sales teams and clients on product suitability, installation methods, and compliance with building codes.</p></li><li><p>Manage and maintain inventory of building materials and electrical equipment, ensuring availability and optimal stock levels.</p></li><li><p>Conduct site visits to assess project requirements, and verify the quality of supplied materials.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Related technical field.</p></li><li><p>Minimum of 3 years of experience in a technical role within the building materials or electrical trading industry.</p></li><li><p>Proven expertise in reading and interpreting architectural and electrical drawings and schematics.</p></li><li><p>Strong understanding of electrical standards, and safety regulations.</p></li></ul><p></p></section>