وظائف اخصائي دراسات جدوى - الشارقة الإمارات

<p>The Transport Planner will work within WSP s Transport Planning &amp; Mobility department, supporting the development of multimodal transport strategies, traffic modelling, and infrastructure design for public and private sector projects. You will collaborate with multidisciplinary teams, engage stakeholders, and apply best practice methodologies to enhance mobility and reduce environmental impact across the region.</p> <ul> <li>Develop and evaluate transport models and forecasts for road, public transit, and active travel networks.</li> <li>Prepare traffic impact assessments and mitigation strategies for development projects.</li> <li>Support the creation of sustainable transport plans, corridor studies, and mobility strategies.</li> <li>Conduct field data collection, traffic counts, and travel surveys as required.</li> <li>Collaborate with engineers, architects, and consultants to integrate transport solutions into project designs.</li> <li>Prepare technical reports, presentations, and visualisations for clients and authorities.</li> <li>Assist in the preparation of tender documents, cost estimates, and feasibility studies.</li> <li>Stay updated on local regulations, standards, and emerging mobility technologies.</li> <li>Participate in stakeholder workshops and public consultation sessions.</li> <li>Mentor junior staff and contribute to knowledge sharing within the team.</li> </ul><p><strong>Desired Candidate Profile</strong></p><ul> <li>Bachelor s degree in Transport Engineering, Planning, Civil Engineering, or related field (Master s preferred).</li> <li>Minimum 5 years of experience in transport planning, traffic modelling, or mobility analysis.</li> <li>Proficiency with transport modelling software (e.g., VISSIM, AIMSUN, VISUM, SYNCHRO).</li> <li>Strong analytical and problem solving skills with attention to detail.</li> <li>Excellent written and verbal communication skills in English; Arabic is a plus.</li> <li>Ability to work effectively in multidisciplinary teams and manage multiple tasks.</li> <li>Knowledge of UAE transport regulations, standards, and sustainability guidelines.</li> <li>Experience preparing technical reports, presentations, and client deliverables.</li> </ul>

<ul><li>Design and analyze electrical systems, ensuring compliance with industry standards and safety regulations to deliver efficient solutions.</li><li>Conduct feasibility studies and cost analysis for projects, providing clients with clear insights into the economic viability of proposed designs.</li><li>Develop and implement testing procedures for electrical systems, ensuring reliability and performance through rigorous evaluation.</li><li>Collaborate with cross-functional teams, including mechanical and civil engineers, to integrate electrical solutions seamlessly into larger projects.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Electrical Engineering or a related field, providing a solid foundation in core engineering principles.</li><li>Professional Engineer (PE) license preferred, demonstrating a commitment to the highest standards of practice in the field.</li><li>Minimum of 3 years of relevant work experience in electrical engineering, showcasing expertise in system design and implementation.</li><li>Experience in specific industries such as renewable energy, telecommunications, or manufacturing, aligning with the company's focus areas.</li></ul>

<p>We are looking for a skilled Technical Sales Support Engineer with 3–5 years of experience in the manufacturing or heat exchanger industry. The candidate will be responsible for reviewing customer enquiries, analyzing technical drawings and specifications, coordinating feasibility studies, and supporting the sales team in preparing accurate and competitive technical quotations. The ideal candidate should have a strong mechanical engineering background, knowledge of heat exchangers, pressure vessel design, materials, and relevant industry standards, along with the ability to coordinate effectively with sales and engineering teams.</p><p>.<strong>Job Profile</strong></p><ul><li><p>Analyze customer requests, drawings, and specifications to register an Enquiry & raise a feasibility study form/request in the system.</p></li><li><p>Ensure all quotations are technically sound, competitive, and aligned with company standards.</p></li><li><p>Assist the sales team in resolving complex technical questions from customers.</p></li><li><p>Collaborate with the engineering team to ensure designs meet all performance and safety requirements.</p></li><li><p>Ensure all documentation is accurate, up-to-date, and easily accessible for the sales team.</p></li><li><p>Track the status of quotes and orders to ensure they are processed efficiently.</p></li><li><p>Maintain a strong working relationship with the sales team to understand their challenges and provide proactive support.</p></li><li><p>Participate in sales meetings and presentations to explain technical aspects of our products.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Education: Bachelor's degree in Mechanical Engineering.</p></li><li><p>Experience: 3-5 years of experience in a technical or engineering support role, preferably in the manufacturing or heat exchanger industry.</p></li><li><p>Proficiency in using CAD software (e.g., SolidWorks, AutoCAD, or similar).</p></li><li><p>Strong understanding of heat transfer principles, pressure vessel design, and materials science (e.g., carbon steel, stainless steel, alloys).</p></li><li><p>Familiarity with industry standards (e.g., ASME, PED).</p></li><li><p>Experience with quotation software or ERP systems (e.g., SAP, Oracle).</p></li><li><p>Familiarity with the heat exchanger industry and its specific terminology.</p></li><li><p>Knowledge of welding codes and inspection standards.</p></li><li><p>Excellent communication and interpersonal skills.</p></li><li><p>Strong problem-solving and analytical thinking abilities.</p></li><li><p>Ability to work independently and manage multiple tasks in a fast-paced environment.</p></li><li><p>Attention to detail and a high degree of accuracy.</p></li></ul>

<strong>Job Description<br><br></strong>WSP in the Middle East are looking for a Graduate Consultant – Creative AV to join our growing Specialist Creative, AV &amp; Immersive Technology team within WSP Middle East. The role will focus on supporting the design, development, and delivery of innovative audio‑visual, creative technology, and immersive experience solutions for a diverse range of buildings and destinations across the region.<br><br>You will work alongside our multidisciplinary engineering, digital, and experience design experts to help shape next‑generation environments that merge technology, storytelling, space, and user experience.<br><br><strong>Responsibilities<br><br></strong><ul><li>Support the design and integration of creative AV, immersive technologies, and digital media systems in major projects.</li><li>Assist in concept development, interactive experience prototyping, and technical documentation.</li><li>Prepare design reports, presentations, and schematics with guidance from senior team members.</li><li>Contribute to feasibility studies, option analyses, and research on emerging experience technologies.</li><li>Coordinate with internal teams (Mechanical, Electrical, Lighting, Acoustics, Digital) to ensure integrated design.</li><li>Review contractor submissions and assist in site inspections where required.</li><li>Support project delivery across different stages—from concept to detailed design and implementation.</li><li>Maintain strong communication with project stakeholders and wider WSP teams.<br><br><br></li></ul><strong>Qualifications<br><br></strong><ul><li>Bachelor’s or Master’s degree in Innovation Design Engineering, Design Innovation, Creative Engineering, or a closely related field such as creative technology, immersive design, digital media, or experience engineering.</li><li>0–2 years of experience in AV design, creative technology, multimedia systems, or immersive environments — including internships, academic projects, or industry placements.</li><li>Strong understanding of AV systems, multimedia technologies, and immersive experience design.</li><li>Familiarity with prototyping tools, creative coding, XR/VR/AR platforms, and digital fabrication workflows.</li><li>Knowledge of user‑centred design, interaction design, and creative technology methods.</li><li>Strong visual storytelling, communication, and documentation skills.</li><li>Passion for emerging creative technologies and their application in the built environment.<br><br><br></li></ul><strong>With us, you can. </strong> <strong>Apply today.</strong>

<strong>Job Description<br><br></strong>This individual will be part of the management team leading our Investment and Transaction Advisory practice in the delivery of high-quality services to top-tier public and private sector clients in our practice by bringing his/her advisory expertise to the team. He/she shall provide expertise in project preparation, business case development, investment decisions, market sounding, PPP and JV commercial structures and broader commercial exposure to large Infrastructure projects. This will be in a wide variety of sectors including social infrastructure, transportation (including airports, railway, roads and ports), waste to energy, and water and wastewater.<br><br><strong>Responsibilities<br><br></strong><ul><li>Contribute to practice strategy, service line development and go-to-market.</li><li>Engage with government bodies, regulators, and private-sector stakeholders to understand their requirements and develop our pipeline of qualifying infrastructure projects, including shaping opportunities pre-procurement.</li><li>Provide advisory support across the full project lifecycle, including strategy development, business case preparation, commercial structuring, and, where required, post–commercial-close support. </li><li>Coordinate the development of pre-feasibility and feasibility studies, value-for-money analysis, public-private comparators, risk assessment and mitigation matrices, procurement models and evaluation criteria. </li><li>Oversee technical due diligence and combine with commercial due diligence for investment committees contemplating an infrastructure investment. </li><li>Translate technical and sector engineering depth into board- and ministry-ready strategic narrative Represent WSP in discussions and negotiations with key stakeholders. </li><li>Work collaboratively with multidisciplinary teams in Advisory services, Property &amp; Building, Transport and Infrastructure, and Project Management Services business units — convening and leading multidisciplinary delivery. </li><li>Manage project economics, including collections, work-in-progress (WIP) status, revenue forecasting, invoicing, and related financial oversight</li><li>Supervise the performance of junior team members, providing clear directions and regular monitoring and feedback on performance. </li><li>Ensure the on-going learning and development of junior team members <br><br><br></li></ul><strong>Qualifications<br><br></strong><ul><li>B.Sc. degree in accounting and finance, economics, engineering, management, policy or a related field.</li><li>A professional qualification (MBA and/or CFA) or similar study is preferred.</li><li>Infrastructure advisory experience with a minimum of 8 years in the field. </li><li>Relevant experience in providing Investment &amp; Transaction Advisory services, either in a PPP / JV transaction context or in an Infrastructure M&amp;A context. Experience in the Strategy &amp; Transactions or Deals service lines at the Big Four or similar consultancies is preferred.</li><li>Substantial experience in more than one subsector of infrastructure covering more than one region geographically.</li><li>Track record of leading projects to reach commercial and/or financial close.</li><li>Recognized by peers and/or managers for providing high quality, pragmatic advice to clients on infrastructure PPPs and/or Infrastructure M&amp;A.</li><li>Client focus and commitment to results. </li><li>High level written and oral presentation skills in English. Arabic skills valuable but not mandatory.<br><br><br></li></ul><strong>Imagine a better future for you and a better future for us all.<br><br></strong>Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself?<br><br><strong>With us, you can. Apply today.</strong>

<p> <strong>WE’RE HIRING: MECHANICAL ENGINEER!</strong> ⚙️</p><p><strong>Turn Engineering Ideas Into Reality. Create Solutions That Move Industries Forward!</strong></p><p><strong>We are currently looking for a motivated, technically skilled, and professional Mechanical Engineer to join our expanding organization. The successful candidate will play an important role in supporting engineering operations, developing mechanical solutions, improving equipment performance, and ensuring that all engineering activities meet project specifications and safety standards.</strong></p><p><strong>This is an excellent opportunity for an engineering professional who enjoys solving technical challenges, working on innovative projects, and contributing to the development of reliable mechanical systems.</strong></p><p><strong> Location:</strong> United Arab Emirates (UAE)</p><p> <strong>Salary:</strong> AED 8,000–13,000 per month</p><p> <strong>Employment Type:</strong> Full-Time</p><p> <strong>Key Responsibilities</strong></p><ul><li>Design, develop, and improve mechanical equipment, systems, and components.</li><li>Prepare engineering drawings, technical specifications, and design documentation.</li><li>Conduct mechanical calculations, technical assessments, and feasibility studies.</li><li>Supervise mechanical installation and commissioning activities.</li><li>Inspect equipment and ensure all systems operate according to technical requirements.</li><li>Diagnose mechanical faults and recommend effective repair solutions.</li><li>Coordinate with project managers, contractors, suppliers, and other engineering teams.</li><li>Monitor project progress and ensure engineering tasks meet established deadlines.</li><li>Develop preventive maintenance plans to improve equipment reliability.</li><li>Evaluate mechanical components and recommend suitable materials and technologies.</li><li>Ensure all engineering activities comply with safety regulations and industry standards.</li><li>Prepare technical reports, inspection records, and engineering progress updates.</li><li>Support cost estimation, procurement, and technical evaluation processes.</li><li>Identify opportunities to improve productivity, energy efficiency, and equipment performance.</li></ul><p>✅ <strong>Requirements</strong></p><ul><li>Bachelor's degree in Mechanical Engineering or an equivalent technical qualification.</li><li>3–5 years of professional experience in mechanical engineering.</li><li>Strong understanding of mechanical design, manufacturing, and engineering principles.</li><li>Ability to read and interpret technical drawings and engineering specifications.</li><li>Proficiency in AutoCAD, SolidWorks, or other engineering design software.</li><li>Knowledge of mechanical maintenance, installation, and troubleshooting.</li><li>Familiarity with engineering codes, safety standards, and quality requirements.</li><li>Strong analytical thinking and technical problem-solving abilities.</li><li>Excellent communication and teamwork skills.</li><li>Ability to manage multiple engineering tasks and meet project deadlines.</li><li>Experience in construction, manufacturing, industrial, or energy-related projects is an advantage.</li><li>Relevant professional engineering certifications are preferred.</li><li>Good command of English; Arabic is an advantage.</li></ul><p> <strong>What We Offer</strong></p><ul><li>Attractive and competitive monthly salary package.</li><li>Performance-based bonuses and incentives.</li><li>Medical insurance and employee benefits.</li><li>Paid annual leave and public holidays.</li><li>Professional training and technical development programs.</li><li>Opportunities for career advancement and promotion.</li><li>Exposure to challenging engineering and industrial projects.</li><li>Modern working facilities and engineering resources.</li><li>Supportive and collaborative professional environment.</li><li>Opportunities to work alongside experienced engineering specialists.</li><li> <strong>APPLY NOW!</strong></li></ul>

<strong>Job Purpose<br><br></strong>Responsible for the product discovery lifecycle and its success, identifying potential products in the aviation domain and overseeing the development of product concepts in line with commercial objectives. Approves artefact roadmaps, including long- and short-term plans, budgets and pricing for product introduction, launch and promotion. Ensures the delivery of usable, emotionally engaging and inspiring products that meet user expectations.<br><br>Key Result Responsibilities<br><br><ul><li>Accountable for the success of delivery, owns the entire product backlog and delivery activities. This includes grooming development teams and responding to queries of the development team promptly.</li><li>Guides the development team at each sprint and removes any roadblocks to enhance their performance. Ensures that products are delivered within the timelines agreed.</li><li>Ensures stories are ready before the sprint start, matching definition of ready and having clear acceptance criteria.</li><li>Manages and prioritizes the product backlog along with the Product Manager, which matches product vision and client needs.</li><li>Liaises between business and development teams to deliver continuous value.</li><li>Reviews visual designs developed by UX team.<br><br></li></ul>Key Result Responsibilities-Continued<br><br><ul><li>Reviews test cases written by QA team. Stays abreast with market trends and new technologies in the domain, researches and conducts comparative analysis with competitors to recommend best practices.</li><li>Monitors the development and product teams' performance and escalates any potential performance deviation to Product Managers.</li><li>Represents ISA in clients' meetings and solicits feedback on products and services regularly.<br><br></li></ul><strong>People Management<br><br></strong><ul><li>Provides direction, coaching and guidance to team members for their career and professional development. </li><li>Creates a conducive working environment to build and sustain a performance driven, engaged, and committed team. </li><li>Ensures people management responsibilities are handled effectively in line with company procedures.<br><br></li></ul><strong>Qualifications (Academic, Training, Languages)<br><br></strong><ul><li>Bachelor's Degree in Technical Engineering, Computer Science, Mathematics or equivalent.</li><li>Certified Scrum Master, Professional Certified Product Owner (PSPO) or Certified Scrum Product Owner (CSPO) is a plus.</li><li>PMP and PRINCE II certifications are an added value.</li><li>Strong technical background with a sound understanding of software development.</li><li>Thorough understanding of UI/UX design.</li><li>Strong analytical and synthesis skills, with the ability to process large amounts of data and translate them into actionable information.</li><li>Comfortable using collaboration tools such as Slack and JIRA.</li><li>Fluent in English Language.</li><li>Proficient in MS Office.<br><br></li></ul>Work Experience<br><br><ul><li>With 12–15 years of relevant professional experience, with a proven track record in product management, product development, technical management or a related field.</li><li>Subject matter expertise in technical management, technical solution design and architecture.</li><li>Proven track record of successfully leading products throughout their lifecycle and driving effective decision-making.</li><li>Hands-on experience in preparing and analyzing business performance reports.</li><li>Experience managing financials, including budgets and cost estimates.</li><li>Proven ability to execute new initiatives and achieve company objectives through technical expertise and interpersonal skills.</li><li>Proven experience applying Agile Development and SCRUM methodologies.</li><li>Expertise in market research and benchmarking, with the ability to identify and adopt best practices.</li><li>Expertise in drafting policies and procedures and conducting feasibility studies.</li></ul>

<strong>Job Purpose<br><br></strong>Responsible for the product discovery lifecycle and its success, identifying potential products in the aviation domain and overseeing the development of product concepts in line with commercial objectives. Approves artefact roadmaps, including long- and short-term plans, budgets and pricing for product introduction, launch and promotion. Ensures the delivery of usable, emotionally engaging and inspiring products that meet user expectations.<br><br>Key Result Responsibilities<br><br><ul><li>Accountable for the success of delivery, owns the entire product backlog and delivery activities. This includes grooming development teams and responding to queries of the development team promptly.</li><li>Guides the development team at each sprint and removes any roadblocks to enhance their performance. Ensures that products are delivered within the timelines agreed.</li><li>Ensures stories are ready before the sprint start, matching definition of ready and having clear acceptance criteria.</li><li>Manages and prioritizes the product backlog along with the Product Manager, which matches product vision and client needs.</li><li>Liaises between business and development teams to deliver continuous value.</li><li>Reviews visual designs developed by UX team.<br><br></li></ul>Key Result Responsibilities-Continued<br><br><ul><li>Reviews test cases written by QA team. Stays abreast with market trends and new technologies in the domain, researches and conducts comparative analysis with competitors to recommend best practices.</li><li>Monitors the development and product teams' performance and escalates any potential performance deviation to Product Managers.</li><li>Represents ISA in clients' meetings and solicits feedback on products and services regularly.<br><br></li></ul><strong>People Management<br><br></strong><ul><li>Provides direction, coaching and guidance to team members for their career and professional development. </li><li>Creates a conducive working environment to build and sustain a performance driven, engaged, and committed team. </li><li>Ensures people management responsibilities are handled effectively in line with company procedures.<br><br></li></ul><strong>Qualifications (Academic, Training, Languages)<br><br></strong><ul><li>Bachelor's Degree in Technical Engineering, Computer Science, Mathematics or equivalent.</li><li>Certified Scrum Master, Professional Certified Product Owner (PSPO) or Certified Scrum Product Owner (CSPO) is a plus.</li><li>PMP and PRINCE II certifications are an added value.</li><li>Strong technical background with a sound understanding of software development.</li><li>Thorough understanding of UI/UX design.</li><li>Strong analytical and synthesis skills, with the ability to process large amounts of data and translate them into actionable information.</li><li>Comfortable using collaboration tools such as Slack and JIRA.</li><li>Fluent in English Language.</li><li>Proficient in MS Office.<br><br></li></ul>Work Experience<br><br><ul><li>With 12–15 years of relevant professional experience, with a proven track record in product management, product development, technical management or a related field.</li><li>Subject matter expertise in technical management, technical solution design and architecture.</li><li>Proven track record of successfully leading products throughout their lifecycle and driving effective decision-making.</li><li>Hands-on experience in preparing and analyzing business performance reports.</li><li>Experience managing financials, including budgets and cost estimates.</li><li>Proven ability to execute new initiatives and achieve company objectives through technical expertise and interpersonal skills.</li><li>Proven experience applying Agile Development and SCRUM methodologies.</li><li>Expertise in market research and benchmarking, with the ability to identify and adopt best practices.</li><li>Expertise in drafting policies and procedures and conducting feasibility studies.</li></ul>

<p><strong>Role Purpose</strong></p><p>We are seeking a capable and commercially aware <strong>Project Manager with experience in ports, terminals, logistics, industrial, or related infrastructure</strong> to manage capital projects from initial assessment through design, procurement, construction, commissioning, and handover.</p><p>The role sits within a lean projects team and requires an individual who can take genuine ownership of projects rather than simply administer them. The successful candidate will work across technical, operational, commercial, and stakeholder interfaces and will be expected to independently drive projects while escalating key decisions, risks, and strategic issues when required.</p><p>This is a <strong>client-side project management role</strong>. It requires sufficient technical depth to challenge consultants, contractors, and proposed solutions, while maintaining focus on programme, cost, risk, constructability, operational requirements, and business objectives.</p><p><br></p><p><strong>Key Responsibilities</strong></p><p><strong>Project Development &amp; Feasibility</strong></p><ul><li>Support the assessment of new port, terminal, logistics, warehouse, depot, and infrastructure development opportunities.</li><li>Review available site information, operational requirements, surveys, existing infrastructure, utilities, access, marine constraints, and authority requirements.</li><li>Participate in site investigations and identify missing information, constraints, risks, and potential project blockers.</li><li>Develop or coordinate preliminary layouts, scope definitions, development concepts, and implementation strategies.</li><li>Prepare or review preliminary quantities, <strong>ROM CAPEX estimates</strong>, project schedules, and development assumptions.</li><li>Challenge proposed layouts and technical solutions from the perspectives of constructability, operations, cost, phasing, and future expansion.</li><li>Contribute technical and project-delivery input to feasibility studies, business-development proposals, concessions, leases, and investment evaluations.</li></ul><p><br></p><p><strong>Design Management</strong></p><ul><li>Prepare consultant scopes of work, technical briefs, and design deliverable requirements.</li><li>Manage multidisciplinary consultants across relevant disciplines including civil, structural, architectural, MEP, marine, utilities, traffic, fire and life safety, and specialist systems.</li><li>Coordinate design inputs from operations, commercial, IT, equipment, HSE, maintenance, finance, and other internal stakeholders.</li><li>Review drawings, specifications, calculations, BOQs, reports, and design submissions.</li><li>Identify design gaps, interface risks, constructability issues, unnecessary cost, and scope ambiguity.</li><li>Manage design development from concept through tender and IFC stages.</li><li>Ensure designs reflect operational requirements and minimize disruption to existing port or logistics operations.</li></ul><p><br></p><p><strong>Procurement &amp; Commercial Support</strong></p><ul><li>Prepare and coordinate tender packages for consultants, contractors, and specialist suppliers.</li><li>Participate in tender clarification meetings, technical evaluations, bid normalization, and recommendation reports.</li><li>Review contractor methodologies, programmes, qualifications, exclusions, and technical proposals.</li><li>Support commercial teams with scope clarification, variation assessment, change management, and contractual correspondence.</li><li>Assist with CAPEX control, commitments, forecasts, and evaluation of project cost impacts.</li><li>Maintain awareness of contractual obligations, deliverables, milestones, and project risks.</li></ul><p><br></p><p><strong>Project Execution</strong></p><ul><li>Take day-to-day ownership of assigned projects from award through completion.</li><li>Establish project execution plans, programmes, deliverable schedules, reporting structures, and responsibility matrices.</li><li>Coordinate consultants, contractors, suppliers, internal departments, authorities, landlords, and other stakeholders.</li><li>Monitor construction progress against approved programme, budget, scope, quality, and HSE requirements.</li><li>Lead regular project and progress meetings and drive closure of actions.</li><li>Identify delays and emerging risks early and develop mitigation or recovery measures.</li><li>Review contractor programmes, progress claims, variations, RFIs, technical submissions, and change requests.</li><li>Ensure technical decisions are made with consideration of programme, cost, operational impact, and whole-life performance.</li><li>Conduct regular site inspections and verify that the works are progressing in accordance with contractual and technical requirements.</li><li>Maintain project momentum and actively resolve issues rather than relying solely on consultants or contractors to drive resolution.</li></ul><p><br></p><p><strong>Stakeholder &amp; Authority Management</strong></p><ul><li>Act as a key project interface between internal stakeholders, consultants, contractors, operators, and external organizations.</li><li>Coordinate requirements with port authorities, municipalities, utility providers, civil defence, customs, landlords, and other relevant government or regulatory entities.</li><li>Translate competing stakeholder requirements into practical project decisions.</li><li>Prepare clear technical papers, recommendations, presentations, and decision briefs for senior management.</li><li>Escalate issues with a clear explanation of the problem, available options, implications, and recommended course of action.</li></ul><p><br></p><p><strong>Project Controls &amp; Governance</strong></p><ul><li>Maintain accurate project schedules, budgets, risk registers, change logs, action trackers, and project dashboards.</li><li>Produce concise and decision-oriented weekly and monthly project reports.</li><li>Monitor progress, critical milestones, expenditure, commitments, forecast cost, and key risks.</li><li>Maintain appropriate project documentation and ensure decisions and changes are properly recorded.</li><li>Support the continuous improvement of project-management procedures, templates, lessons learned, cost databases, and delivery standards.</li></ul><p><br></p><p><strong>Commissioning &amp; Closeout</strong></p><ul><li>Coordinate testing, commissioning, inspections, snagging, statutory approvals, and operational readiness.</li><li>Manage project handover to operations and maintenance teams.</li><li>Ensure completion of as-built drawings, O&amp;M manuals, warranties, training records, asset information, and other closeout documentation.</li><li>Track defects and outstanding obligations through final completion.</li><li>Conduct project closeout reviews and capture lessons learned for future developments.</li></ul><p><br></p><p><strong>Candidate Profile</strong></p><p><strong>Experience</strong></p><ul><li>Approximately <strong>8–12 years of relevant professional experience</strong>, with meaningful responsibility for project delivery.</li><li>Demonstrated experience managing infrastructure or capital projects through multiple stages of the project lifecycle.</li><li>Experience in one or more of the following is required:</li><li>Ports and container terminals</li><li>Inland container depots and dry ports</li><li>Logistics facilities and freight terminals</li><li>Warehouses and industrial developments</li><li>Marine and heavy civil infrastructure</li><li>Transport infrastructure</li><li>Exposure to <strong>brownfield or operational environments</strong> where construction must be coordinated around ongoing operations is highly desirable.</li><li>Client-side, developer, port-operator, consultant, or strong main-contractor experience will be considered provided the candidate demonstrates genuine project ownership.</li></ul><p><br></p><p><strong>Education &amp; Qualifications</strong></p><ul><li>Bachelor's degree in <strong>Civil Engineering, Construction Management, Mechanical Engineering, Electrical Engineering, or another relevant engineering discipline</strong>.</li><li>Master’s degree in a relevant field is advantageous.</li><li>Industry specific certifications are advantageous.</li><li>PMP, PRINCE2, PMI-SP, or equivalent project-management qualification is advantageous but not mandatory.</li><li>Knowledge of FIDIC or similar international forms of contract is advantageous.</li></ul><p><br></p><p><strong>Technical &amp; Commercial Competencies</strong></p><p>The candidate is not expected to personally design every discipline but must have enough engineering judgment to understand, interrogate, and coordinate multidisciplinary projects.</p><p>The successful candidate should be comfortable with:</p><ul><li>Civil and infrastructure works</li><li>Pavements and container-yard development</li><li>Drainage and utilities</li><li>Buildings and warehouses</li><li>MEP and fire/life-safety systems</li><li>Port and logistics operational layouts</li><li>Marine works and dredging at a working-knowledge level</li><li>Material quantities and preliminary cost estimation</li><li>Construction methodology and constructability</li><li>Project scheduling and critical-path analysis</li><li>Tendering and technical bid evaluation</li><li>Contract administration and change management</li><li>CAPEX development and cost control</li><li>Risk identification and mitigation</li></ul><p>Competence in tools such as Primavera P6, MS Project, Excel, AutoCAD, Power BI, BIM/Revit, or equivalent systems is advantageous.</p>

<br><br><p><strong>Key Responsibilities:</strong></p><p>Experience in a lead position in power system studies and grid integration studies for Renewable Power Plants. Should have profound knowledge about renewable generation (Solar PV inverters, wind energy systems, BESS), HVDC, FACTS (STATCOM, SVC, SCG). Should have hands-on experience working on software like PSCAD, PSS/E, ETAP, Dig SILENT and should have delivered studies using the software</p><p>Required Skills</p><ul><li>Strong analytical skills</li><li>Report writing skills</li><li>Strong communication skills</li><li>Python programming</li></ul><p><br></p><p><strong><u>Substations &amp; Grid Integration (Must Skills)</u></strong></p><p><u> </u><strong><u>EHV System – Substation &amp; Transmission</u></strong></p><ul><li><strong>Experience in Grid integration</strong> </li><li>Shall be able to develop models / in thoroughly understanding OEM Dynamic model using their manual / ability to test and validate the OEM model and identify issues and solving through vendor before using it.</li><li>Studies like Transient and Steady state stability studies, voltage stability studies, harmonic studies, power quality studies, LVRT (Low Voltage Ride Through) and Fault Ride Through studies. Reactive Power compensation studies (sizing of Filters)</li><li>Experience in Contingency analysis for designing grid components.</li><li><strong>Knowledge &amp; Working hands on Experience in the following software:</strong></li><li>PSS-E</li><li>Dig SILENT,</li><li>ETAP</li><li>PSCAD, EMTP-RV, </li></ul><p><br></p><p><strong><u>Renewables ( Must Skills)</u></strong></p><p><strong>a) Shall have knowledge on Modelling of Renewable Energy sources (especially Solar, BESS &amp; Wind).</strong></p><ul><li>Load flow studies, Reactive power assessment, and contingency analysis to assess the overloading elements in the network as per the Renewable Energy Systems (RES) capacity addition plans/scenarios.</li></ul><p><u>‘</u><strong><u>b) Utility Substation / Industrial Substation ( it is deemed to have experience in this field)</u></strong></p><ul><li>Load Flow, Short Circuit Calculation</li><li>Relay Coordination</li><li>Experience in performing motor acceleration and re-acceleration studies as per process requirement for motor grouping.</li></ul><p><strong>‘c) Preferred Skills (i.e working experience in the project):</strong>Experience in design of power generation mix for microgrid and battery storage systems using software like HOMER, PLEXOS or similar.</p><ul><li>Experience in protection relay selection, coordination studies – over current / Earth fault, Unit protection, distance protection, motor protection, generator protection and grid tie-in.</li></ul><p><strong>D) Insulation Coordination Study skills (i.e working experience in the project):</strong></p><ul><li>Experience in Insulation coordination studies - cable energization, transformer energization, reactor energization, TRV, direct and indirect lightning strike study, very fast transient over voltage (GIS) using PSCD or similar, Switching study, Power oscillation damping, Sub-Synchronous Resonance study.</li></ul><p><br></p><p><strong>Minimum Qualification-</strong> Post-Graduation in Power Systems Engineering/Electrical Engineering/Renewable Energy (MTech / ME).</p><p><strong>Experience - </strong>Minimum 10 to 12 professional experience in Power System Studies with Hands-on experience in Renewable power plant studies, industrial power system studies with emphasis on relay coordination and arc flash hazard analysis.</p><p><br></p><p><strong>Software Skills Required:</strong></p><ul><li>Proficient in STAAD Pro., Awareness ETABs, SAP, AUTOCAD, REVITT, TEKLA, CONCISE BEAM ,LIRA SAPR.LIRA soft</li></ul>

<strong>Job Purpose<br><br></strong>Manage, and monitor “Power Plants: Engines and APU Reliability Program” of the Airline's and third-party aircrafts.<br><br>Encompasses short/long term maintenance needs and modifications to optimize engines and APUs’ reliability, achieve cost-effective operational dispatch, and to ensure fleet readiness and safety. Oversees the implementation thru completion of Engines and APUS maintenance programs.<br><br><strong>Key Result Responsibilities<br><br></strong><ul><li>Manages the aircrafts “Power Plants” technical assessment program on day-to-day basis to support the engineering maintenance (Line, Hangar, MCC, hubs), this would include data collection, performance review, and analysis of requests, management reporting, corrective measures, and necessary modifications.</li><li>Supports the Head of Engineering in developing procedures, specifications, and EOS (Engineering Operational Standards) associated with the “Propulsion Reliability Program”. Reviews publications and regulations related to “Propulsion” scope of work, agrees the same with concerned parties ensuring the maintenance program is managed, developed and optimized as per operational needs and as per the continuous airworthiness requirements of the regulatory bodies and OEMs.</li><li>Utilizes data and technical performance reports to conduct root-cause analysis and troubleshooting. Highlights trends and findings, and conducts needed investigations. Identifies corrective measures and modifications to fix any damages or airworthiness findings, ensures recommendations are introduced into the AMP (Aircraft Maintenance Program) along with justification and supporting evidences.</li><li>Generates function-related reports to the management, cross-functional teams, and the regulatory bodies on the power plant reliability data, damages, trends, defines repair scope and maintenance plans in coordination with Planning Team (Engine/APU Removal and instalment as well as the spare engines robbery / management).</li><li>Provides support to the MCC, Manufacturers and OEMs when and as needed; communicates to them any trouble shooting requirements, changes, mandatory modifications and any necessary information or action to be taken.</li><li>Reviews the Service Bulletins and ADs, evaluates services and provides business cases for CAMO’S approval; drafts the EO’s (Engineering Orders) to verify the employees’ documents and communicates to Planning and Maintenance Teams.</li><li>Partners with stakeholders such as Projects, Warranty, Legal and Finance in developing new projects and initiatives and in drafting and administrating related contracts and SLAs, this includes performance review, evaluations, feasibility studies, researches, testing, etc.</li><li>Manages the Engine Shop Visits to monitor the process flow and maintain the advantages and benefits of Air Arabia as per the contracts and maintenance polices as well to ensure smooth operations.</li><li>Monitors the systems to identify Engine Oil Consumption based on data extracted from the “RAL or any other MIS” to facilitate the requirements of the ETOPS as well as to cost-effectively control oil consumption.</li><li>Partners with Finance Department to settle function-related invoices as per agreed terms and conditions.</li><li>Assists in preparation for the audit checks and reviews as well in the closure of occurrence reports and audit findings.<br><br></li></ul><strong>Qualifications (Academic, Training, Languages)<br><br></strong><ul><li>Bachelor degree in Aircraft Engineering (Mechanical/Aeronautical) or equivalent; alternately a higher diploma or certificate in the relating field from a recognized university or engineering college combined with needed experience and exposure.</li><li>Respective training on system of Engines/APU, recommended Airbus 320</li><li>Project Management, Cost Control, Compliance, Budgeting and Quality Assurance certificates and trainings are an added value and some may be treated as conditional for this role.</li><li>Capable of using technology systems &amp; tools; proficient in Microsoft suite, MRO systems and Web Search.</li><li>Excellent in written and verbal communication skills: reporting, presentations, etc.</li><li>Fluent in English Language.<br><br></li></ul><strong>Work Experience<br><br></strong><ul><li>5+ years’ of collective experience in the Aviation industry; On the Job Training (OJT) or post university time spent at an Airline company as a Trainee or in a similar capacity shall be counted for as part of the experience; experience with Airbus 320 aircrafts is highly desirable.</li><li>Experienced in aircrafts airworthiness programs requirements and regulations, such as CAMO (Continuing Airworthiness Management Organization) requirements.</li><li>Hands-on power plant and engine development work especially on CFM56/5B &amp; APIC/ GTCP 131-9A APUs. </li><li>Exposure on engines/APUs work scoping &amp;engine shop visit planning and dealing with engines manufacturers. </li><li>Very good understanding of aircrafts planning/maintenance systems and techniques and their relation to the aircraft maintenance program.</li><li>Familiar with rules and regulations of Civil Aviation Authorities, preferably GCAA, pertaining to the Engineering Maintenance, policies, procedures, manuals and licensing.</li><li>Hands on designing, implementing, and monitoring policies, procedures and operating manuals.</li><li>Experienced in measuring performance against regulations, contracts and SLAs of extreme technical nature.</li><li>Exposure to Quality Assurance /Safety/Internal &amp; External Audit practices a.</li></ul>

<p> JOB DESCRIPTION:</p><ul><li><p>Supporting environmental accounting and sustainability reporting</p></li><li><p>Responsible for carbon accounting, reporting, and compliance submissions to regulators and other relevant oil and gas authorities.</p></li><li><p>Leading client aspects of Environmental and Social Impact Assessment (ESIA) studies</p></li><li><p>Supporting development and maintenance of company and asset Environmental Management Plans</p></li><li><p>Supporting and assisting in HSE Auditing and assurance activities.</p><p><br>ROLE LATITUDE:</p><p>It’s envisaged that the role would be Sharjah-based with occasional trips to Kurdistan and potentially Federal Iraq.</p><br><p>TRAINING OPPORTUNITIES INCLUDE:</p><ul><li><p>ESIA liaison with consultant companies</p></li><li><p>Auditing and assurance</p></li><li><p>Environmental reporting using SAP software</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor’s degree in Environmental engineering/ science/ management</p><p>At least three years’ experience of ESIA (client or consultant) </p>

<ul><li><p>The Financial Analyst is responsible for evaluating project financial feasibility, monitoring working capital liquidity, and bridging on-site Daily Progress Reports (DPRs) with accounting ledgers. The role provides executive management with variance dashboards, sensitivity analyses, and Cost-to-Complete (CTC) forecasts to safeguard project profit margins.&nbsp;</p><p><strong>2. KEY RESPONSIBILITIES & DAY-TO-DAY ACCOUNTABILITIES</strong>&nbsp;</p><ul><li><p><strong>Project Financial Feasibility & Modeling: </strong>Develop dynamic financial models, cash flow forecasts, and IRR analyses for ongoing civil projects and upcoming tenders.&nbsp;</p></li></ul><ul><li><p><strong>Working Capital Analysis: </strong>Conduct weekly tracking of working capital cycles, project liquidity, unbilled receivables, and billing-versus-collection milestones.&nbsp;</p></li></ul><ul><li><p><strong>DPR Alignment & Revenue Analytics: </strong>Reconcile daily site progress data (DPRs) with financial revenue recognition, verifying physical completion milestones against budget allocations.&nbsp;</p></li></ul><ul><li><p><strong>Variance Analysis & CVR Oversight: </strong>Prepare monthly Cost-Value Reconciliation (CVR) and Cost-to-Complete (CTC) variance analyses, investigating major divergences across labor, materials, and plant.&nbsp;</p></li></ul><ul><li><p><strong>Executive Dashboards & Presentations: </strong>Build and present monthly executive MIS dashboards, Board variance reports, and KPI review packs for the CFO and executive committee.&nbsp;</p></li></ul><ul><li><p><strong>ERP Financial Optimization: </strong>Utilize enterprise ERP systems (SAP/Oracle) to extract, analyze, and structure project cost-accounting databases with strict data integrity.&nbsp;</p></li></ul><ul><li><p><strong>Commercial Subcontract & Vendor Reviews: </strong>Evaluate subcontractor progress commitments, major material purchase commitments, and cost variation impacts.&nbsp;</p></li></ul><ul><li><p><strong>Audit & Budget Support: </strong>Participate in the corporate annual budgeting cycle, project milestone financial reviews, and external statutory audit requirements.&nbsp;</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Required Qualification: </strong>CA (Chartered Accountant) or equivalent professional finance qualification (CPA, ACCA, CMA)&nbsp;</p></li></ul><ul><li><p><strong>Required Experience: </strong>Minimum 3 years of financial analysis experience in the contracting / construction industry&nbsp;</p></li></ul>

<ul><li>Execute high-fidelity reproduction of artwork, ensuring precise color matching and detail preservation from original source to final output.</li><li>Manage and troubleshoot complex digital files, optimizing them for various printing techniques and substrates while maintaining artistic integrity.</li><li>Collaborate closely with designers and clients to understand project requirements and provide expert technical guidance on reproduction feasibility.</li><li>Perform meticulous color correction and retouching using advanced software, achieving accurate and aesthetically pleasing results.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a Bachelor's degree in Graphic Design, Fine Arts, or a related field, demonstrating a strong foundation in visual arts.</li><li>Have 3-5 years of dedicated experience as a Repro Artist or in a similar color-critical production role within the printing or publishing industry.</li><li>Demonstrate expert proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign) with a focus on color correction and manipulation tools.</li><li>Exhibit a deep understanding of color theory, G7 standards, and various printing processes (offset, digital, flexo).</li></ul>

<p>Oversee supervision, coordination, and quality control of all civil works—including infrastructure, earthworks, structural concrete, utilities, and roadworks—across real estate development projects from design to handover and DLP, ensuring regulatory compliance and high construction standards.</p><ol><li><p>Supervise execution of civil works across multiple projects (buildings finishing, earthworks, structural, roads, utilities).</p></li><li><p>Review civil designs for compliance, feasibility, and coordination with other disciplines.</p></li><li><p>Lead civil site teams, ensuring quality, safety, and adherence to project timelines.</p></li><li><p>Oversee contractor performance, shop drawing approvals, and material submittals.</p></li><li><p>Coordinate with consultants, contractors, and Sharjah authorities for smooth execution and compliance.</p></li><li><p>Assist in tender review, scope alignment, and technical bid evaluations.</p></li><li><p>Monitor construction progress, issue site reports, and support QA/QC inspections.</p></li><li><p>Manage civil-related handover, DLP rectifications, and final documentation.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Civil Engineering.</p></li><li><p>15+ years total experience, 5+ years in senior site/coordinator roles.</p></li><li><p>Strong UAE experience with Sharjah Municipality and infrastructure authorities.</p></li><li><p>Expertise in roads, infrastructure, concrete works, and construction supervision.</p></li><li><p>Skilled in AutoCAD, Revit/BIM, MS Office, and field inspection tools.</p></li></ul>

<br><ul> </ul> Benefits &amp; Allowances Potential benefits may include medical insurance, housing support, annual flights, visa sponsorship, relocation assistance, end-of-service benefits, and continuing medical education, subject to the final employment contract.<br> Overview A premium private hospital in Sharjah is seeking a female Specialist Radiologist to provide diagnostic imaging and reporting services across a range of clinical specialties. The successful candidate will interpret imaging studies, communicate important findings to referring clinicians, and contribute to accurate diagnosis and appropriate treatment planning.<br> Clinical Responsibilities <ul> <li>Review and interpret diagnostic imaging studies, including X-rays, ultrasound, CT, and MRI, according to training and clinical privileges.</li> <li>Prepare clear, accurate, and timely radiology reports.</li> <li>Correlate imaging findings with clinical information and recommend further investigations when appropriate.</li> <li>Identify urgent or critical findings and communicate them promptly to the responsible clinical team.</li> <li>Perform image-guided diagnostic procedures within approved training and privileges.</li> <li>Collaborate with referring physicians and other specialists to support patient diagnosis and management.</li> <li>Follow established imaging protocols and radiation-safety standards.</li> <li>Maintain accurate clinical documentation and comply with hospital policies.</li> <li>Participate in quality assurance, peer review, clinical audits, and continuing professional development.</li> </ul> Requirements <ul> <li>Recognized specialist qualification in Radiology or Diagnostic Imaging.</li> <li>Specialist-level experience consistent with applicable UAE licensing requirements.</li> <li>Eligibility for, or an active licence from, the relevant UAE health authority, as required.</li> <li>Strong diagnostic interpretation and reporting skills.</li> <li>Excellent communication, attention to detail, and teamwork abilities.</li> <li>Commitment to patient safety, evidence-based imaging, and professional ethics.</li> </ul> Why Join This Opportunity? <ul> <li>Competitive estimated tax-free salary package.</li> <li>Opportunity to work within a multidisciplinary diagnostic service.</li> <li>Access to medical imaging facilities and specialist collaboration.</li> <li>Potential professional development and continuing medical education.</li> <li>Additional benefits subject to the final employment offer.</li> </ul> <br><p></p>

<p>Humanities &amp; Business Studies teacher Humanities from Grades 7 to 9 and Business Studies in Grade 10, leading into DP Business Management. Inquiry Based Curriculum | Sharjah, UAE | August 2027 FOUR DAY WORKING WEEK Build scientific curiosity. Shape the next generation of scientists. This role offers an excellent opportunity to grow professionally alongside the school. In the 2028 29 academic year, as the school welcomes its first Grade 11 cohort, the position will transition towards teaching IB Diploma Programme</p><p><br></p><ul><li>Excellent professional development</li></ul><p>The ideal candidate will have:</p><ul><li>A relevant degree.</li><li>A recognised teaching qualification..</li><li>A commitment to practical investigation, enquiry-based learning and the development of scientific literacy.</li><li>The ability to plan a challenging, differentiated curriculum that meets the needs of diverse learners.</li><li>Excellent classroom management, communication and collaborative working skills.</li><li>The flexibility and enthusiasm to contribute to the development of a growing secondary school programme.</li><li>Previous IB Diploma Programme teaching experience in subject.</li></ul><p>This is an opportunity for a science specialist who is excited by the prospect of helping shape a growing school, establishing strong middle school provision and progressing into Diploma Programme teaching as the senior school develops.</p><p>What would make someone stand out:</p><ul><li>IB Diploma experience, or a real interest in growing into the DP</li><li>Flexibility and a willingness to teach across subjects in a growing school</li><li>An interest in leadership.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>A relevant degree. A recognised teaching qualification.. A commitment to practical investigation, enquiry-based learning and the development of scientific literacy. The ability to plan a challenging, differentiated curriculum that meets the needs of diverse learners. Excellent classroom management, communication and collaborative working skills. The flexibility and enthusiasm to contribute to the development of a growing secondary school programme. Previous IB Diploma Programme teaching experience in subject.</p><p>What would make someone stand out:</p><ul><li>IB Diploma experience, or a real interest in growing into the DP</li><li>Flexibility and a willingness to teach across subjects in a growing school</li><li>An interest in leadership.</li></ul>

<p>✓ Annual marketing strategy & calendar for AAE and AWP ✓ Lead & develop the Marketing Executive and Digital/SEO team ✓ Protect and elevate the AAE / AWP brand across every channel ✓ Digital marketing, SEO and lead-generation performance ✓ Content strategy – case studies, videos, campaigns ✓ Marketing collateral & campaigns supporting Sales ✓ Exhibitions and events – planning to post-event review ✓ Monthly KPI dashboard & performance reporting to management</p><p><strong>Desired Candidate Profile</strong></p><p>▸ 5–7 years B2B marketing experience – industrial / manufacturing background preferred ▸ Fluent English; Arabic is an advantage ▸ A proactive, ownership mindset – you set the plan and deliver it "Marketing that drives commercial results – not just visibility."</p>

<ul><li>Diagnose and treat a wide spectrum of urological conditions, including prostate cancer, kidney stones, and urinary incontinence.</li><li>Perform complex surgical procedures, such as robotic-assisted prostatectomies and minimally invasive stone removal.</li><li>Interpret diagnostic tests, including imaging studies and urodynamic evaluations, to formulate accurate diagnoses.</li><li>Provide compassionate and comprehensive patient care, explaining diagnoses and treatment options in a clear and understandable manner.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possesses a Doctor of Medicine (M.D.) or Doctor of Osteopathic Medicine (D.O.) degree, demonstrating a strong educational foundation.</li><li>Holds a valid medical license and board certification in Urology, ensuring professional competence and expertise.</li><li>Demonstrates extensive experience in urology, showcasing a proven track record of successful patient outcomes.</li><li>Has completed a residency in Urology, providing specialized training in the diagnosis and treatment of urological conditions.</li></ul>

<p><strong>GAPS</strong> - Guidance for Academic & Professional Studies is an educational consultancy in Sharjah , UAE, dedicated to facilitating higher educational opportunities and guiding students towards academic and professional success</p><br><ul><li><p>Counsel prospective candidates on Bachelor’s, Master’s, Doctoral, and professional programs.</p></li><li><p>Manage incoming student inquiries via phone, WhatsApp, and social media channels.</p></li><li><p>Maintain structured follow-up routines to consistently meet monthly admission targets.</p></li><li><p>Clearly explain program details, entry requirements, fee schedules, and payment plans.</p></li><li><p>Guide candidates through the application process and collect required registration documents.</p></li><li><p>Update and maintain student interaction records accurately within the CRM system.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>1 to 5 years of experience in academic counseling, student recruitment, or education sales.</p></li><li><p>Excellent verbal and written English communication skills; additional languages are a plus.</p></li><li><p>Strong consultative sales, negotiation, and student engagement capabilities.</p></li><li><p>Proficient in digital communication platforms and CRM tools.</p></li><li><p>Currently residing in and available for work within the UAE.</p></li></ul>