وظائف مهندس معماري - رأس الخيمة الإمارات

<ol><li><p>Assemble drone airframes, structural components, landing systems and other mechanical assemblies.</p></li><li><p>Install motors, propellers, batteries, wiring harnesses, connectors and electronic components as per technical drawings.</p></li><li><p>Perform basic electrical and mechanical integration of flight-control and onboard systems.</p></li><li><p>Carry out component inspection and verify correct fitment, alignment, torque and connections.</p></li><li><p>Conduct functional checks and pre-test inspections on completed drone assemblies.</p></li><li><p>Support engineering and production teams during prototype assembly, modification and testing.</p></li><li><p>Identify assembly defects, damaged components, wiring issues or other abnormalities and report them to the supervisor/engineer.</p></li><li><p>Use hand tools, power tools, measuring instruments and assembly fixtures safely and correctly.</p></li><li><p>Maintain accurate assembly, inspection and testing records.</p></li><li><p>Ensure all work is completed in line with company quality, safety and EHS requirements.</p></li><li><p>Maintain a clean, organized and controlled assembly workstation.</p></li><li><p>Support continuous improvement initiatives to improve assembly quality, productivity and reliability.</p></li><li><p>Follow all applicable company procedures relating to confidentiality, security and controlled technical information.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Diploma / ITI / Technical Certificate in <strong>Mechanical, Electrical, Electronics, Mechatronics, Aeronautical or a related field</strong>.</p></li><li><p><strong>2–5 years of experience</strong> in drone/UAV, RC aircraft, electronics, automotive, aerospace or precision mechanical assembly.</p></li><li><p>Experience in mechanical and electrical assembly is highly desirable.</p></li><li><p>Ability to read and understand basic engineering drawings, wiring diagrams and technical instructions.</p></li><li><p>Good knowledge of hand tools, power tools, connectors, wiring and basic electrical testing.</p></li><li><p>Basic understanding of motors, batteries, ESCs, sensors and electronic components.</p></li><li><p>Experience with UAV/drone assembly or integration will be an advantage.</p></li><li><p>Good attention to detail and ability to work with precision components.</p></li><li><p>Ability to work independently as well as within a multidisciplinary production team.</p></li></ol><br><p>Preferred Experience Candidates with experience in UAV assembly, RC aircraft, aerospace manufacturing, automotive electrical systems, robotics, mechatronics or electronics manufacturing will be preferred.</p>

<p>JOB SUMMARY & ACCOUNTABILITIES: The Technical Engineer plays a critical role in all engineering-related activities to support the growth of the Busbar global line of business. The incumbent will provide technical expertise to the project team while supporting the Busbar engineering team to ensure technical compliance with our type-tested design and IEC standards. This position requires in-depth knowledge of Vertiv's busbar product range and strong collaboration across Vertiv’s estimation, sales, offering, engineering, and project delivery teams to leverage common designs and type-tested products. This opportunity is for someone who wants to work within a technically driven team with minimal functional management and continue to build on the reputation we have created around the world. The role requires strong collaboration across Vertiv’s busbar line of Business to leverage common standards and design tools. <br><br>Job Role:<br></p><p>Lead comprehensive technical feasibility assessments, design optimization studies, and engineering risk</p><p>evaluations for complex customer requirements — encompassing electrical load calculations, voltage</p><p>drop analysis, current density distribution, short-circuit withstand validation, and structural integrity</p><p>assessments for busbar systems integrated with LV switchgear assemblies.</p><ul><li><p>Conduct rigorous technical reviews of customer specifications, contractual design drawings, engineering</p></li></ul><p>submissions, and technical submittals; systematically identify compliance deviations, technical risks,</p><p>design optimization opportunities, and non-conformances against IEC 61439-1 & IEC 61439-6 (busbar</p><p>systems), and applicable project standards.</p><ul><li><p>Perform advanced electrical system analysis and simulation using ETAP — including load flow studies,</p></li></ul><p>fault current analysis, protection coordination, harmonic distortion evaluation, busbar sizing verification,</p><p>and switchgear coordination studies — to validate system performance and ensure code-compliant</p><p>electrical distribution design.</p><ul><li><p>Prepare and validate comprehensive wiring diagrams, single-line diagrams (SLDs), three-line diagrams</p></li></ul><p>(3LDs), cable schedule documentation, and instrument loop diagrams for busbar systems integrated with</p><p>LV switchgear assemblies, MCC panels, distribution boards, and mission-critical electrical networks;</p><p>ensure all documentation conforms to IEC, BS, and project-specific drawing standards.</p><ul><li><p>Develop, issue, and maintain standardized engineering documentation libraries including design</p></li></ul><p>guidelines, technical procedures, drawing standards, calculation templates, and engineering</p><p>specifications; ensure consistent implementation and governance across global manufacturing plants</p><p>and regional operations.</p><ul><li><p>Prepare comprehensive technical specifications, engineered Bills of Material (eBOM), shop drawings,</p></li></ul><p>manufacturing work instructions, and assembly documentation; coordinate technical requirements with</p><p>manufacturing engineering, procurement, and quality assurance teams to ensure seamless design-to</p><p>production transfer.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor’s degree</p><ul><li><p>4-year degree in engineering-related field (Minimum)</p></li><li><p>Graduate in Electrical engineering or equivalent.</p></li><li><p>Experience in design of Low voltage switchgear.</p></li><li><p>Hands on experience of Auto CAD.</p></li><li><p>Knowledge of relevant IEC codes and standards.</p></li><li><p>Good planning and organization skills.</p></li><li><p>Team player</p></li><li><p>Strong willingness to share knowledge and/or experience ability to listen and be open to other</p></li></ul><p>ideas.</p><ul><li><p>Ability to show a proactive attitude.</p></li><li><p>Offers advice and proposes solutions when risks/ opportunities arise.</p></li><li><p>Strong verbal and written communication skills</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Develop and implement comprehensive QA/QC plans tailored to specific projects to ensure adherence to industry standards and client specifications.</li><li>Conduct rigorous inspections and testing of materials, processes, and products at various stages of production to identify non-conformities.</li><li>Collaborate closely with project teams to provide immediate feedback on quality issues and recommend corrective actions to enhance performance.</li><li>Maintain detailed documentation of quality control processes, inspection results, and non-conformance reports to facilitate audits and compliance.</li><li>Utilize advanced statistical techniques to analyze quality data and trends, making data-driven decisions to improve processes.</li><li>Stay current with industry trends and advancements in quality assurance practices, applying innovative solutions to enhance QAQC processes.</li><li>Monitor project timelines and deliverables, ensuring that quality objectives are met without compromising schedule or budget constraints.</li><li>Lead root cause analysis for quality-related issues, implementing corrective actions to prevent recurrence and enhance overall quality performance.</li><li>Coordinate with external auditors and regulatory bodies during site inspections and project reviews to ensure compliance with all applicable standards.</li><li>Develop and implement detailed QAQC plans to align with project specifications and regulatory requirements, ensuring that quality standards are met throughout the project lifecycle.</li><li>Conduct thorough inspections and audits of materials, processes, and finished products, identifying defects and ensuring compliance with industry standards.</li><li>Collaborate closely with project managers, engineers, and contractors to provide actionable feedback and recommendations for continuous improvement in quality processes.</li><li>Utilize statistical analysis and quality control tools to assess project performance and identify trends, facilitating data-driven decision-making.</li><li>Prepare and maintain accurate documentation of inspections, test results, and quality assurance processes to provide clear traceability and accountability.</li><li>Train and mentor team members on quality control procedures and best practices, fostering a culture of quality awareness and responsibility.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Engineering, Quality Management, or a related field; advanced degrees are a plus for more complex projects.</li><li>Minimum of 5 years of relevant experience in quality assurance and quality control within the construction, manufacturing, or engineering sectors.</li><li>Certifications such as Six Sigma, ISO 9001, or Certified Quality Engineer (CQE) are highly desirable to demonstrate a commitment to quality excellence.</li><li>Strong understanding of industry-specific standards and regulations, particularly in sectors like construction, manufacturing, or aerospace.</li><li>Proficiency in quality management software and tools, including statistical analysis software and project management systems.</li><li>Excellent communication skills, both verbal and written, to effectively convey quality standards and collaborate with diverse teams.</li><li>Ability to work independently as well as part of a team, demonstrating strong leadership qualities and a proactive approach to problem-solving.</li><li>Detail-oriented mindset with a strong analytical ability to assess complex situations and make informed decisions.</li><li>Willingness to travel to project sites as needed, showcasing flexibility in adapting to various work environments.</li><li>Bilingual proficiency in English and another relevant language is preferred to facilitate communication in diverse teams.</li></ul><p></p></section>

<p>Radisson Hotel Group is one of the world's largest hotel groups with ten distinctive hotel brands, and more than 1,500 hotels in operation and under development in 95+ countries. The Group’s overarching brand promise is Every Moment Matters with a signature Yes I Can! service ethos.<br><br><br><br>People are at the core of our business success and future. Our people are true Moment Makers and together we bring the culture, spirit, environment and opportunities that empower you to be your best, every day, everywhere, every time. Together, we make Every Moment Matter.<br><br><br><br></p><strong>Job Description<br><br></strong><p>Duties &amp; Responsibilities:<br><br></p><ul><li>Responsible for the repair and maintenance of all carpentry and joinery works. </li><li>To perform minor repairs and replacements to all hinges and door closures. </li><li>Responsible for the repair and maintenance of all furnishings, i.e. chairs, tables, cabinets etc. </li><li>Will be required to work with such material as wood, fibre-board, Formica, glass and plasterboard. </li><li>Responsible for carrying out minor constructions and installations. </li><li>Responsible for giving Store Controller information in order to facilitate accurate stock control of materials. </li><li>Responsible to report any potential hazard noted whilst on duty. </li><li>Responsible for ensuring that the supplied uniform is clean and in good repair. Unless it is an emergency, ensure a clean and tidy appearance before entering a Guest Area and if necessary, change into a clean uniform. </li><li>Responsible for using the appropriate safety clothing/ equipment and for following all maintenance instructions as laid down by the HOD. </li><li>Responsible for assisting other personnel in emergencies and for carrying out other Engineering duties that may be required by the Asst. Chief Engineer and according to the needs of the Department. </li><li>Attend on job / off job trainings when assigned. </li><li>Follow the department and hotel policies and procedures. </li><li>Strictly adhere the hotel safety, risk management and emergency policies and procedures. </li><li>Responsible for keeping working area tidy and in good order. </li></ul><p>Requirements:<br><br></p><ul><li><p>Technical certification in Carpentry.<br><br></p></li><li><p>2–5 years of experience in hotel or building maintenance.<br><br></p></li><li><p>Knowledge of water systems, pumps, and sanitary installations.<br><br></p></li><li><p>Good troubleshooting skills.<br><br></p></li><li><p>Ability to work shifts and respond to emergencies.<br><br><br><br></p></li></ul><strong>Additional Information<br><br></strong><p><strong>Why Join Radisson Hotel Group?</strong> <br><br></p><p><strong>Live the Magic of Hospitality - </strong>Be part of a team that creates <strong>exceptional experiences and memorable moments</strong> every day. Let your <strong>Yes I Can!</strong> spirit shine as you bring hospitality to life. <br><br></p><p><strong>Build a Great Career - </strong>No matter your background or experience, we invest in your <strong>growth, learning, and career development</strong>—helping you reach your full potential. <br><br></p><p><strong>Experience the Team Spirit - </strong>Join a workplace that’s <strong>inclusive, fun, and meaningful</strong>. We celebrate diversity, support one another and foster a sense of belonging through our <strong>Employee Resource Groups and inclusion initiatives</strong>. <br><br></p><p><strong>Lead with Your Ambition - </strong>Your ideas, passion and drive matter! We empower you to <strong>make a difference</strong>—in hospitality, your community and beyond. <br><br></p><p><strong>Enjoy Global &amp; Local Perks - </strong>No matter where you’re located, you’ll enjoy exclusive global benefits - like special hotel rates for you and your loved ones at our hotels worldwide. Plus, you’ll have access to local perks and rewards tailored to your country, making your experience even more rewarding! <br><br></p><p><strong>Join us in shaping the future of hospitality!</strong> If you’re ready to <strong>bring your talent, energy, and passion</strong>, we’d love to hear from you. <br><br></p><p><strong>Apply now and let’s make every moment matter.</strong> <br><br></p><p>We welcome applicants from all <strong>backgrounds, abilities, and experiences</strong>. If you need any adjustments during the application process, please let us know.</p>

<strong>Job Description<br><br></strong><strong>Exceptional Hospitality Starts with You<br><br></strong>Picture yourself brightening someone’s day. When you join our hotels team, that’s exactly what you’ll do every time you come to work! As a <strong>Plumber</strong>, you’re not just maintaining the hotel’s physical safety and functionality – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br><strong>Responsibilities<br><br></strong><strong>Key Duties &amp; Responsibilities:<br><br></strong><ul><li>Install, maintain, and repair water supply, drainage, sewage, and plumbing systems throughout the hotel.</li><li>Attend to plumbing faults, leaks, blockages, low water pressure, and other maintenance requests promptly.</li><li>Carry out preventive maintenance of pipes, valves, pumps, water heaters, tanks, toilets, showers, sinks, and related equipment.</li><li>Inspect plumbing systems regularly and identify potential issues before they lead to major breakdowns.</li><li>Respond to guest room, public area, kitchen, staff area, and back-of-house plumbing complaints.</li><li>Repair and maintain sanitary fixtures, faucets, flush valves, mixers, and other plumbing fittings.</li><li>Support the Engineering team during renovations, room maintenance, and new installations.</li><li>Monitor water tanks, pumps, and related systems and report any abnormalities to the Engineering Supervisor.</li><li>Maintain proper drainage systems and ensure that wastewater and sewage lines are functioning effectively.</li><li>Work closely with Housekeeping, F&amp;B, Stewarding, and other departments to resolve plumbing-related issues.</li><li>Maintain adequate stock of plumbing tools, spare parts, and materials and report requirements to the supervisor.</li><li>Follow all hotel safety procedures, preventive maintenance schedules, and local regulations.</li><li>Maintain accurate records of completed work, repairs, and maintenance activities.</li><li>Ensure all work areas are kept clean and safe after completing maintenance tasks.</li><li>Assist in emergency situations such as major water leaks, pipe bursts, flooding, or drainage failures.</li><li>Perform any other duties and responsibilities assigned by the Engineering Supervisor or Chief Engineer.<br><br></li></ul><strong>Qualifications<br><br></strong><strong>What It Takes to Make the Stay<br><br></strong>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of <strong>Hospitality</strong>. Acting with <strong>Integrity</strong> and always doing the right thing. Inspiring others through <strong>Leadership</strong>. A belief that <strong>Teamwork</strong> drives the best outcomes. A sense of <strong>Ownership</strong> and accountability. And a focus on the <strong>Now</strong>, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br><strong>About Us<br><br></strong><strong>Join an Award-Winning Workplace Culture<br><br></strong>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

<p>We are looking for an <strong>Experienced Facade Designer</strong> to join our growing team in Ras Al Khaimah. Candidates must be currently available in the UAE and possess strong experience in façade design, detailing, and project coordination.</p><br><ul><li><p>Prepare façade shop drawings, fabrication drawings, and construction details.</p></li><li><p>Develop technical drawings and design solutions for aluminium, glass, and façade systems.</p></li><li><p>Coordinate with project managers, engineers, consultants, and site teams.</p></li><li><p>Review project specifications, architectural drawings, and tender documents.</p></li><li><p>Ensure drawings comply with project requirements, industry standards, and client specifications.</p></li><li><p>Support material estimation, design optimization, and value engineering activities.</p></li><li><p>Assist in resolving technical and design-related issues during project execution.</p></li><li><p>Maintain drawing revisions and project documentation.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>✔ Minimum 3+ years of experience in façade design ✔ Strong knowledge of aluminium, glazing, curtain wall, and façade systems ✔ Proficiency in AutoCAD (mandatory) ✔ Experience with façade detailing and shop drawings ✔ Ability to read and interpret architectural and structural drawings ✔ Strong coordination and communication skills ✔ Must be currently available in the UAE ✔ Immediate joiners preferred</p>

The Quality Control Technician is responsible for performing routine inspection, sampling, testing, and verification of in-process materials, and finished powder coating products to ensure compliance with approved specifications and quality requirements.<br><br>The role supports production through timely testing, accurate reporting, effective identification of non-conforming products, and adherence to established QC procedures, safety requirements, and good laboratory practices.<br><br><strong>Reporting lines<br><br></strong><ul><li>Functional Guidance: Laboratory Manager &amp; QC leader, Powder Coating, UAE.</li><li>Admin/Legal Entity: Business Director, General Industrial MEART.<br><br></li></ul><strong>Key Responsibilities<br><br></strong><strong>In-Process Quality Control<br><br></strong><ul><li>Collect and test powder coating samples during production according to the defined inspection and testing plan.</li><li>Perform timely testing to support production release and minimize manufacturing delays.</li><li>Verify critical quality parameters and compare results against product specifications.</li><li>Communicate out-of-specification or abnormal results immediately to the QC Supervisor and Production team.</li><li>Support production personnel with adjustments and re-testing according to approved procedures.</li><li>Monitor quality consistency between production batches.<br><br></li></ul><strong>Finished Product Testing<br><br></strong><li>Perform routine physical and application testing of powder coatings, which may include:</li><ul><li>Color and visual appearance</li><li>Gloss</li><li>Film thickness</li><li>Particle size distribution</li><li>Gel time</li><li>Specific gravity/density, where applicable</li><li>Powder flow and appearance</li><li>Application behavior</li><li>Surface finish and visual defects</li><li>Adhesion</li><li>Impact resistance</li><li>Bend/flexibility testing</li><li>Other product-specific tests according to internal methods and customer specifications<br><br></li></ul><strong>Color &amp; Appearance Evaluation<br><br></strong><ul><li>Conduct visual and instrumental color evaluation against approved standards.</li><li>Operate spectrophotometers/color measurement instruments as required.</li><li>Evaluate color difference and appearance against established acceptance criteria.</li><li>Assess gloss, texture, metallic appearance, surface finish, and other visual characteristics.</li><li>Maintain and handle master color standards and reference panels appropriately.</li><li>Report color deviations promptly and support production color correction activities as required.<br><br></li></ul><strong>Product Release &amp; Non-Conformance Control<br><br></strong><ul><li>Verify test results against approved specifications before recommending batch acceptance/release.</li><li>Immediately report results outside specification limits.</li><li>Support investigation and re-testing of non-conforming batches.</li><li>Assist with additional testing of reworked or corrected batches.</li><li>Ensure that only valid and authorized test results are used for product release decisions. <br><br></li></ul><strong> Laboratory Equipment &amp; Calibration<br><br></strong><ul><li>Operate laboratory instruments and test equipment according to approved operating procedures.</li><li>Perform routine verification/checks of laboratory equipment before use.</li><li>Ensure instruments are within their valid calibration status</li><li>Report equipment malfunction, damage, or calibration issues immediately.</li><li>Maintain equipment in clean and suitable working condition.</li><li>Support scheduled calibration, verification, and preventive maintenance activities.</li><li>Maintain equipment usage and verification records where required.<br><br></li></ul><strong>Documentation &amp; Quality Systems<br><br></strong><ul><li>Accurately record all observations, measurements, calculations, and test results.</li><li>Complete QC reports, inspection records, test sheets, and electronic records as required.</li><li>Follow approved SOPs, work instructions, specifications, test methods, and quality plans.</li><li>Maintain traceability between samples, production batches, test panels, standards, and recorded results.</li><li>Ensure records are clear, complete, legible, accurate, and completed at the time testing is performed.</li><li>Maintain laboratory housekeeping and documentation standards.</li><li>Support continuous improvement activities within the QC laboratory.<br><br></li></ul><strong>Health, Safety &amp; Environment<br><br></strong><ul><li>Follow all plant and laboratory HSE requirements.</li><li>Use appropriate personal protective equipment (PPE) while handling powders, chemicals, hot panels, laboratory equipment, and production samples.</li><li>Follow safe practices for powder coating application and curing operations.</li><li>Properly identify, store, handle, and dispose of laboratory chemicals, samples, and waste.</li><li>Immediately report unsafe conditions, incidents, spills, and equipment hazards.<br><br></li></ul><strong>Qualifications<br><br></strong><strong>Education<br><br></strong><ul><li>Relevant technical/vocational qualifications will be considered based on experience.<br><br></li></ul><strong>Experience &amp; Skills<br><br></strong><ul><li>1–3 years of experience in a QC laboratory or manufacturing quality environment preferred.</li><li>Experience in powder coatings, paints, coatings is highly desirable.</li><li>Functional Expertise – solid functional/business skills / background, able to provide guidance to drive programs/projects.</li><li>Data analysis skills – to analyze trends, pareto defects, etc.</li><li>Written and spoken English as well as local language.<br><br></li></ul><strong>Our Company<br><br></strong>Axalta has remained at the forefront of the coatings industry by continually investing in innovative solutions. We engineer technologies that protect customers’ products – whether they are battling heat, light, corrosion, abrasion, moisture, or chemicals – and add dimension and beauty with colorful finishes. We have a vast and ever-evolving portfolio of brands primed to play an important part in everything from modernizing infrastructure around the world to enabling the next generation of electric and autonomous vehicles.<br><br>Axalta operates its business in two segments: Performance Coatings and Mobility Coatings, which serve four end markets, including Refinish, Industrial, Light Vehicle and Commercial Vehicle, across North America, EMEA, Latin America and Asia-Pacific. Our diverse global footprint allows us to deliver solutions in over 140+ countries and coat 30 million vehicles per year. We’ve recently set an exciting 2040 carbon neutrality goal, in addition to 10 other sustainability initiatives, and we take pride in working with our customers to optimize their businesses and achieve their goals.<br><br>Axalta may use technology-assisted tools, including artificial intelligence (AI), to support certain aspects of the recruitment and selection process. These tools may be used to help manage applications, identify job-related qualifications, and assist recruiter review. All hiring decisions involve human oversight and review.<br><br><strong>Recruitment Fraud Alert</strong>: We take candidate safety seriously. If you believe you’ve encountered a fraudulent job posting claiming to represent our company, please include a link or screenshot and report it to TA-Support-Center@axalta.com.<br><br>We consider an individual’s qualifications, skillset, and experience to determine final salary. This role is eligible for benefits such as health insurance and paid time off. The actual offer will be at the company’s sole discretion and determined by relevant business considerations, including the final candidate’s qualifications, years of experience, skillset, and geographic location.<br><br>This is an active opening for which we are recruiting to fill immediately.

<ul><li><p>Prepare detailed shop drawings and fabrication drawings for stainless steel commercial kitchen equipment.</p></li><li><p>Convert approved kitchen layouts, engineering designs into accurate production drawings.</p></li><li><p>Prepare detailed dimensions, sections, elevations, material specifications, thicknesses and fabrication details.</p></li><li><p>Develop cutting, bending, folding, welding and assembly details required for manufacturing.</p></li><li><p>Prepare and optimize cutting layouts and material requirements to minimize material wastage.</p></li><li><p>Review designs and identify dimensional discrepancies, clashes and fabrication difficulties before production.</p></li><li><p>Ensure equipment is designed for proper fit, assembly, installation and functionality.</p></li><li><p>Coordinate with engineering, production, fabrication and installation teams to resolve technical and drawing related issues.</p></li><li><p>Revise drawings based on site measurements, engineering changes, client comments and production requirements.</p></li><li><p>Provide technical clarification and drawing support to the production and installation teams during manufacturing and installation.</p></li><li><p>Verify fabricated items against approved drawings, dimensions and specifications where required.</p></li><li><p>Standardize commonly used design details, components and fabrication methods to improve production efficiency.</p></li><li><p>Support the development and improvement of new kitchen equipment, accessories and fabrication details.</p></li><li><p>Maintain proper drawing numbering, revision control and document records.</p></li><li><p>Maintain an organized archive of approved, revised and completed drawings for future reference.</p></li><li><p>Ensure all drawings are prepared accurately using AutoCAD and SolidWorks and completed within required project timelines.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or Bachelor’s degree in Mechanical Engineering, Architectural Engineering or a related field.</p></li><li><p>3–5 years of GCC experience in stainless steel kitchen equipment manufacturing and fabrication.</p></li><li><p>Strong knowledge of commercial kitchen equipment, stainless steel fabrication and sheet metal work.</p></li><li><p>Proven experience in preparing fabrication and production drawings.</p></li><li><p>Proficiency in AutoCAD and SolidWorks is essential.</p></li><li><p>Ability to interpret architectural, MEP, consultant and kitchen layout drawings and develop fabrication ready drawings.</p></li><li><p>Good understanding of dimensions, material specifications, welding, bending, folding, assembly and material optimization.</p></li><li><p>Strong attention to detail, problem-solving ability, teamwork, and good command of English.</p></li></ul>

<ul><li><p>Develop and review technical design packages and construction documentation</p></li><li><p>Ensure compliance with project specifications, local regulations, and quality standards</p></li><li><p>Coordinate with multidisciplinary teams throughout project delivery</p></li><li><p>Support the successful execution of high-end residential and hospitality developments</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>5-8 years of relevant architectural experience</p></li><li><p>Proven experience delivering <strong>luxury residential and hotel projects</strong></p></li><li><p>Strong technical design, detailing, and project delivery capabilities</p></li><li><p>Excellent knowledge of UAE building regulations and construction standards</p></li><li><p><strong>Must hold an Unlimited License from Ras Al Khaimah Municipality (RAKM)</strong></p></li><li><p>Ability to coordinate effectively with consultants, contractors, and project stakeholders</p></li></ul><br><p>Only shortlisted candidates will be contacted.</p>

<ul><li>Develop detailed 2D CAD drawings for civil infrastructure projects, including site plans, road layouts, and drainage systems, ensuring adherence to engineering standards.</li><li>Produce precise shop drawings for steel structures, encompassing connections, member fabrication, and assembly sequences, from architectural and structural designs.</li><li>Interpret blueprints, specifications, and design calculations provided by civil and structural engineers to create accurate technical drawings.</li><li>Collaborate closely with project engineers and architects to review designs, identify potential clashes, and implement necessary revisions efficiently.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a Diploma or Bachelor's degree in Civil Engineering, Mechanical Engineering, or a related technical field.</li><li>Demonstrate a minimum of 3-5 years of proven experience as an AutoCAD Draftsman, with a strong focus on civil and steel projects.</li><li>Hold relevant certifications in AutoCAD or CAD drafting, showcasing proficiency in the software.</li><li>Exhibit a deep understanding of civil engineering principles and steel fabrication processes.</li></ul>

<ul><li>Develop detailed 2D CAD drawings for civil infrastructure projects, including site plans, road layouts, and drainage systems, ensuring adherence to engineering standards.</li><li>Produce precise shop drawings for steel structures, encompassing connections, member fabrication, and assembly sequences, from architectural and structural designs.</li><li>Interpret blueprints, specifications, and design calculations provided by civil and structural engineers to create accurate technical drawings.</li><li>Collaborate closely with project engineers and architects to review designs, identify potential clashes, and implement necessary revisions efficiently.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a Diploma or Bachelor's degree in Civil Engineering, Mechanical Engineering, or a related technical field.</li><li>Demonstrate a minimum of 3-5 years of proven experience as an AutoCAD Draftsman, with a strong focus on civil and steel projects.</li><li>Hold relevant certifications in AutoCAD or CAD drafting, showcasing proficiency in the software.</li><li>Exhibit a deep understanding of civil engineering principles and steel fabrication processes.</li></ul>

<ul><li>Fabricate and install custom aluminum and glass structures, including windows, doors, curtain walls, and partitions, ensuring precise measurements and secure fittings.</li><li>Read and interpret blueprints, technical drawings, and specifications to accurately plan and execute projects according to design requirements.</li><li>Operate and maintain specialized tools and machinery, such as glass cutters, saws, drills, and welding equipment, with a strong emphasis on safety protocols.</li><li>Perform repairs and maintenance on existing aluminum and glass installations, troubleshooting issues and implementing effective solutions to restore functionality and aesthetics.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possess a high school diploma or equivalent, with vocational training or apprenticeship in carpentry or aluminum/glass fabrication being a significant advantage.</li><li>Hold relevant certifications in glazing, carpentry, or specific tool operation, demonstrating validated expertise.</li><li>Have a minimum of 3-5 years of hands-on experience in commercial or residential aluminum, glass, and/or carpentry work.</li><li>Demonstrate proficiency in reading and interpreting technical drawings, blueprints, and architectural plans.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Develop, update, and maintain detailed project schedules using Primavera P6.</p></li><li><p>Prepare production, procurement, and installation programmes for multiple joinery projects.</p></li><li><p>Monitor project progress and identify potential delays, recommending corrective actions.</p></li><li><p>Coordinate with production, design, procurement, logistics, and project management teams to ensure smooth project execution.</p></li><li><p>Track material procurement and manufacturing progress against project schedules.</p></li><li><p>Prepare weekly and monthly progress reports for management and clients.</p></li><li><p>Conduct critical path analysis and monitor project milestones.</p></li><li><p>Assist Project Managers with resource planning and workload forecasting.</p></li><li><p>Support tender planning by preparing preliminary schedules and manpower histograms when required.</p></li><li><p>Ensure timely delivery of joinery items to site while maintaining alignment with overall project programmes.</p></li><li><p>Attend internal planning meetings and coordinate with site teams regarding installation sequences.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>5+ years of planning experience</strong> within the joinery, woodworking, or interior fit-out manufacturing industry.</p></li><li><p>Strong proficiency in <strong>Primavera P6</strong> and <strong>Microsoft Excel</strong> for production planning and progress monitoring.</p></li><li><p>Experience in <strong>factory production planning</strong>, material tracking, procurement coordination, and delivery scheduling.</p></li><li><p>Ability to coordinate with <strong>production, procurement, design, QA/QC, and project teams</strong> to ensure timely project execution.</p></li><li><p>UAE experience with a reputed <strong>joinery manufacturer</strong> or <strong>interior fit-out company</strong> is highly preferred.</p></li><li><p>Knowledge of custom furniture, doors, wardrobes, kitchens, wall cladding, or architectural joinery.</p></li><li><p>Experience preparing production schedules, recovery plans, and progress reports.</p></li><li><p>Bachelor's Degree in Civil Engineering, Mechanical Engineering, or equivalent.</p></li></ul><p></p></section>

<ul><li>Create detailed MEP (Mechanical, Electrical, Plumbing) drawings using CAD software, ensuring accuracy and compliance with industry standards.</li><li>Collaborate with engineers and architects to integrate MEP systems seamlessly into overall building design, addressing any potential conflicts.</li><li>Conduct site visits to gather field data and assess existing conditions, ensuring that designs are practical and implementable.</li><li>Review and modify designs based on feedback from project stakeholders, maintaining open lines of communication throughout the drafting process.</li><li>Prepare and maintain project documentation, including specifications, schedules, and reports, to support efficient project management.</li><li>Conduct quality checks on drawings to ensure they meet technical requirements and client expectations before submission.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical or Electrical Engineering or a related field is preferred.</li><li>A minimum of 3 years of relevant work experience in MEP drafting and design is essential.</li><li>Proficiency in AutoCAD and other drafting software is a must for effective design creation.</li><li>Certifications in HVAC, plumbing, or electrical systems design are highly desirable.</li><li>Experience in building information modeling (BIM) is an added advantage for modern project execution.</li><li>Strong attention to detail and accuracy is critical for producing high-quality technical drawings.</li></ul>

<br><ul><li><p>Prepare detailed MEP cost estimates, including material take-offs, labour, subcontractor, and equipment costs</p></li><li><p>Analyse tender drawings, specifications, bills of quantities (BOQ), and scope documents</p></li><li><p>Conduct site visits to understand project conditions and identify risk items</p></li><li><p>Source and evaluate subcontractor and supplier quotations</p></li><li><p>Develop and maintain pricing databases, rate libraries, and unit cost benchmarks</p></li><li><p>Collaborate with project engineers and procurement teams for up-to-date costs of equipment & materials.</p></li><li><p>Prepare tender submissions, bid clarifications, and post-tender negotiations.</p></li><li><p>Support value engineering exercises to optimise cost without compromising quality</p></li><li><p>Ability to read and interpret MEP drawings and technical specifications.</p></li><li><p>Excellent numerical, analytical, and attention-to-detail skills.</p></li><li><p>Ability to work on tight deadlines for tenders for multiple tenders.</p><br></li></ul><p>Qualification :</p><p>Bachelor in Engineering (Electrical / Mechanical)</p><p><strong>Desired Candidate Profile</strong></p><p>2+ yrs of experience in MEP Estimation in a construction sector in UAE</p>

<ul><li>Conduct detailed cost analysis and estimation for civil engineering projects, ensuring accuracy and compliance with industry standards.</li><li>Prepare and manage tender documents, including bills of quantities, to facilitate the bidding process for contractors.</li><li>Monitor project progress and financial performance, identifying any deviations from budget and proposing corrective measures.</li><li>Engage in value engineering practices, assessing alternative construction methods and materials to optimize project costs without compromising quality.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Quantity Surveying, Civil Engineering, or a related field from a recognized institution.</li><li>Professional qualifications such as RICS, CIOB, or similar certifications that demonstrate expertise in quantity surveying.</li><li>A minimum of 3-5 years of relevant work experience within the civil engineering sector, with a proven track record on large-scale projects.</li><li>Preference for candidates with experience in international projects, particularly in regions with complex regulatory environments.</li></ul>

<ul><li><p>Prepare MEP drawings (e.g., layouts, schematics, shop drawings) using AutoCAD, Revit, or BIM software.</p></li><li><p>Ensure designs comply with RAK Municipality standards and UAE utility requirements (e.g., RAK Electricity and Water Authority).</p></li><li><p>Collaborate with the MEP Project Manager and engineers to update drawings based on feedback and site conditions.</p></li><li><p>Coordinate MEP designs with civil and structural disciplines to avoid clashes.</p></li><li><p>Maintain an organized filing system for drawings and revisions.</p></li><li><p>Assist in preparing as-built drawings and supporting project documentation.</p></li><li><p>Participate in design review meetings as directed by the MEP Project Manager.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>We are looking for an MEP Draftsman to produce detailed drawings for mechanical, electrical, and plumbing systems in Ras Al Khaimah. The role supports the MEP team in delivering accurate designs for construction projects.</p><p><br></p><p>Diploma in Mechanical/Electrical Engineering or Drafting.</p><p>Minimum 2 years of MEP drafting experience, preferably in the UAE.</p><p>Proficiency in AutoCAD and Revit.</p><p>Understanding of MEP systems and RAK regulations.</p><p>Detail-oriented with strong communication skills; English fluency required.</p><br>